package routing import ( "bytes" "fmt" "image/color" "math" "math/rand" "sync/atomic" "testing" "time" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/btcsuite/btcd/wire" "github.com/btcsuite/btcutil" "github.com/davecgh/go-spew/spew" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/clock" "github.com/lightningnetwork/lnd/htlcswitch" "github.com/lightningnetwork/lnd/lntypes" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/record" "github.com/lightningnetwork/lnd/routing/route" ) var uniquePaymentID uint64 = 1 // to be used atomically type testCtx struct { router *ChannelRouter graph *channeldb.ChannelGraph aliases map[string]route.Vertex chain *mockChain chainView *mockChainView } func (c *testCtx) RestartRouter() error { // First, we'll reset the chainView's state as it doesn't persist the // filter between restarts. c.chainView.Reset() // With the chainView reset, we'll now re-create the router itself, and // start it. router, err := New(Config{ Graph: c.graph, Chain: c.chain, ChainView: c.chainView, Payer: &mockPaymentAttemptDispatcher{}, Control: makeMockControlTower(), ChannelPruneExpiry: time.Hour * 24, GraphPruneInterval: time.Hour * 2, }) if err != nil { return fmt.Errorf("unable to create router %v", err) } if err := router.Start(); err != nil { return fmt.Errorf("unable to start router: %v", err) } // Finally, we'll swap out the pointer in the testCtx with this fresh // instance of the router. c.router = router return nil } func createTestCtxFromGraphInstance(startingHeight uint32, graphInstance *testGraphInstance) ( *testCtx, func(), error) { // We'll initialize an instance of the channel router with mock // versions of the chain and channel notifier. As we don't need to test // any p2p functionality, the peer send and switch send messages won't // be populated. chain := newMockChain(startingHeight) chainView := newMockChainView(chain) pathFindingConfig := PathFindingConfig{ MinProbability: 0.01, AttemptCost: 100, } mcConfig := &MissionControlConfig{ PenaltyHalfLife: time.Hour, AprioriHopProbability: 0.9, AprioriWeight: 0.5, } mc, err := NewMissionControl( graphInstance.graph.Database(), mcConfig, ) if err != nil { return nil, nil, err } sessionSource := &SessionSource{ Graph: graphInstance.graph, QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi { return lnwire.NewMSatFromSatoshis(e.Capacity) }, PathFindingConfig: pathFindingConfig, MissionControl: mc, } router, err := New(Config{ Graph: graphInstance.graph, Chain: chain, ChainView: chainView, Payer: &mockPaymentAttemptDispatcher{}, Control: makeMockControlTower(), MissionControl: mc, SessionSource: sessionSource, ChannelPruneExpiry: time.Hour * 24, GraphPruneInterval: time.Hour * 2, QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi { return lnwire.NewMSatFromSatoshis(e.Capacity) }, NextPaymentID: func() (uint64, error) { next := atomic.AddUint64(&uniquePaymentID, 1) return next, nil }, PathFindingConfig: pathFindingConfig, Clock: clock.NewTestClock(time.Unix(1, 0)), }) if err != nil { return nil, nil, fmt.Errorf("unable to create router %v", err) } if err := router.Start(); err != nil { return nil, nil, fmt.Errorf("unable to start router: %v", err) } ctx := &testCtx{ router: router, graph: graphInstance.graph, aliases: graphInstance.aliasMap, chain: chain, chainView: chainView, } cleanUp := func() { ctx.router.Stop() graphInstance.cleanUp() } return ctx, cleanUp, nil } func createTestCtxSingleNode(startingHeight uint32) (*testCtx, func(), error) { var ( graph *channeldb.ChannelGraph sourceNode *channeldb.LightningNode cleanup func() err error ) graph, cleanup, err = makeTestGraph() if err != nil { return nil, nil, fmt.Errorf("unable to create test graph: %v", err) } sourceNode, err = createTestNode() if err != nil { return nil, nil, fmt.Errorf("unable to create source node: %v", err) } if err = graph.SetSourceNode(sourceNode); err != nil { return nil, nil, fmt.Errorf("unable to set source node: %v", err) } graphInstance := &testGraphInstance{ graph: graph, cleanUp: cleanup, } return createTestCtxFromGraphInstance(startingHeight, graphInstance) } func createTestCtxFromFile(startingHeight uint32, testGraph string) (*testCtx, func(), error) { // We'll attempt to locate and parse out the file // that encodes the graph that our tests should be run against. graphInstance, err := parseTestGraph(testGraph) if err != nil { return nil, nil, fmt.Errorf("unable to create test graph: %v", err) } return createTestCtxFromGraphInstance(startingHeight, graphInstance) } // TestFindRoutesWithFeeLimit asserts that routes found by the FindRoutes method // within the channel router contain a total fee less than or equal to the fee // limit. func TestFindRoutesWithFeeLimit(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile( startingBlockHeight, basicGraphFilePath, ) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // This test will attempt to find routes from roasbeef to sophon for 100 // satoshis with a fee limit of 10 satoshis. There are two routes from // roasbeef to sophon: // 1. roasbeef -> songoku -> sophon // 2. roasbeef -> phamnuwen -> sophon // The second route violates our fee limit, so we should only expect to // see the first route. target := ctx.aliases["sophon"] paymentAmt := lnwire.NewMSatFromSatoshis(100) restrictions := &RestrictParams{ FeeLimit: lnwire.NewMSatFromSatoshis(10), ProbabilitySource: noProbabilitySource, CltvLimit: math.MaxUint32, } route, err := ctx.router.FindRoute( ctx.router.selfNode.PubKeyBytes, target, paymentAmt, restrictions, nil, nil, MinCLTVDelta, ) if err != nil { t.Fatalf("unable to find any routes: %v", err) } if route.TotalFees() > restrictions.FeeLimit { t.Fatalf("route exceeded fee limit: %v", spew.Sdump(route)) } hops := route.Hops if len(hops) != 2 { t.Fatalf("expected 2 hops, got %d", len(hops)) } if hops[0].PubKeyBytes != ctx.aliases["songoku"] { t.Fatalf("expected first hop through songoku, got %s", getAliasFromPubKey(hops[0].PubKeyBytes, ctx.aliases)) } } // TestSendPaymentRouteFailureFallback tests that when sending a payment, if // one of the target routes is seen as unavailable, then the next route in the // queue is used instead. This process should continue until either a payment // succeeds, or all routes have been exhausted. func TestSendPaymentRouteFailureFallback(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Craft a LightningPayment struct that'll send a payment from roasbeef // to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees. var payHash [32]byte paymentAmt := lnwire.NewMSatFromSatoshis(1000) payment := LightningPayment{ Target: ctx.aliases["sophon"], Amount: paymentAmt, FeeLimit: noFeeLimit, PaymentHash: payHash, } var preImage [32]byte copy(preImage[:], bytes.Repeat([]byte{9}, 32)) // We'll modify the SendToSwitch method that's been set within the // router's configuration to ignore the path that has son goku as the // first hop. This should force the router to instead take the // the more costly path (through pham nuwen). ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { roasbeefSongoku := lnwire.NewShortChanIDFromInt(12345) if firstHop == roasbeefSongoku { return [32]byte{}, htlcswitch.NewForwardingError( // TODO(roasbeef): temp node failure // should be? &lnwire.FailTemporaryChannelFailure{}, 1, ) } return preImage, nil }) // Send off the payment request to the router, route through pham nuwen // should've been selected as a fall back and succeeded correctly. paymentPreImage, route, err := ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("unable to send payment: %v", err) } // The route selected should have two hops if len(route.Hops) != 2 { t.Fatalf("incorrect route length: expected %v got %v", 2, len(route.Hops)) } // The preimage should match up with the once created above. if !bytes.Equal(paymentPreImage[:], preImage[:]) { t.Fatalf("incorrect preimage used: expected %x got %x", preImage[:], paymentPreImage[:]) } // The route should have pham nuwen as the first hop. if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] { t.Fatalf("route should go through phamnuwen as first hop, "+ "instead passes through: %v", getAliasFromPubKey(route.Hops[0].PubKeyBytes, ctx.aliases)) } } // TestChannelUpdateValidation tests that a failed payment with an associated // channel update will only be applied to the graph when the update contains a // valid signature. func TestChannelUpdateValidation(t *testing.T) { t.Parallel() // Setup a three node network. chanCapSat := btcutil.Amount(100000) testChannels := []*testChannel{ symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 1), symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 2), } testGraph, err := createTestGraphFromChannels(testChannels, "a") defer testGraph.cleanUp() if err != nil { t.Fatalf("unable to create graph: %v", err) } const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromGraphInstance(startingBlockHeight, testGraph) defer cleanUp() if err != nil { t.Fatalf("unable to create router: %v", err) } // Assert that the initially configured fee is retrieved correctly. _, policy, _, err := ctx.router.GetChannelByID( lnwire.NewShortChanIDFromInt(1)) if err != nil { t.Fatalf("cannot retrieve channel") } if policy.FeeProportionalMillionths != 400 { t.Fatalf("invalid fee") } // Setup a route from source a to destination c. The route will be used // in a call to SendToRoute. SendToRoute also applies channel updates, // but it saves us from including RequestRoute in the test scope too. hop1 := ctx.aliases["b"] hop2 := ctx.aliases["c"] hops := []*route.Hop{ { ChannelID: 1, PubKeyBytes: hop1, LegacyPayload: true, }, { ChannelID: 2, PubKeyBytes: hop2, LegacyPayload: true, }, } rt, err := route.NewRouteFromHops( lnwire.MilliSatoshi(10000), 100, ctx.aliases["a"], hops, ) if err != nil { t.Fatalf("unable to create route: %v", err) } // Set up a channel update message with an invalid signature to be // returned to the sender. var invalidSignature [64]byte errChanUpdate := lnwire.ChannelUpdate{ Signature: invalidSignature, FeeRate: 500, ShortChannelID: lnwire.NewShortChanIDFromInt(1), Timestamp: uint32(testTime.Add(time.Minute).Unix()), } // We'll modify the SendToSwitch method so that it simulates a failed // payment with an error originating from the first hop of the route. // The unsigned channel update is attached to the failure message. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailFeeInsufficient{ Update: errChanUpdate, }, 1, ) }) // The payment parameter is mostly redundant in SendToRoute. Can be left // empty for this test. var payment lntypes.Hash // Send off the payment request to the router. The specified route // should be attempted and the channel update should be received by // router and ignored because it is missing a valid signature. _, err = ctx.router.SendToRoute(payment, rt) if err == nil { t.Fatalf("expected route to fail with channel update") } _, policy, _, err = ctx.router.GetChannelByID( lnwire.NewShortChanIDFromInt(1)) if err != nil { t.Fatalf("cannot retrieve channel") } if policy.FeeProportionalMillionths != 400 { t.Fatalf("fee updated without valid signature") } // Next, add a signature to the channel update. chanUpdateMsg, err := errChanUpdate.DataToSign() if err != nil { t.Fatal(err) } digest := chainhash.DoubleHashB(chanUpdateMsg) sig, err := testGraph.privKeyMap["b"].Sign(digest) if err != nil { t.Fatal(err) } errChanUpdate.Signature, err = lnwire.NewSigFromSignature(sig) if err != nil { t.Fatal(err) } // Retry the payment using the same route as before. _, err = ctx.router.SendToRoute(payment, rt) if err == nil { t.Fatalf("expected route to fail with channel update") } // This time a valid signature was supplied and the policy change should // have been applied to the graph. _, policy, _, err = ctx.router.GetChannelByID( lnwire.NewShortChanIDFromInt(1)) if err != nil { t.Fatalf("cannot retrieve channel") } if policy.FeeProportionalMillionths != 500 { t.Fatalf("fee not updated even though signature is valid") } } // TestSendPaymentErrorRepeatedFeeInsufficient tests that if we receive // multiple fee related errors from a channel that we're attempting to route // through, then we'll prune the channel after the second attempt. func TestSendPaymentErrorRepeatedFeeInsufficient(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Craft a LightningPayment struct that'll send a payment from roasbeef // to luo ji for 100 satoshis. var payHash [32]byte amt := lnwire.NewMSatFromSatoshis(1000) payment := LightningPayment{ Target: ctx.aliases["sophon"], Amount: amt, FeeLimit: noFeeLimit, PaymentHash: payHash, } var preImage [32]byte copy(preImage[:], bytes.Repeat([]byte{9}, 32)) // We'll also fetch the first outgoing channel edge from roasbeef to // son goku. We'll obtain this as we'll need to to generate the // FeeInsufficient error that we'll send back. chanID := uint64(12345) _, _, edgeUpdateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID) if err != nil { t.Fatalf("unable to fetch chan id: %v", err) } errChanUpdate := lnwire.ChannelUpdate{ ShortChannelID: lnwire.NewShortChanIDFromInt(chanID), Timestamp: uint32(edgeUpdateToFail.LastUpdate.Unix()), MessageFlags: edgeUpdateToFail.MessageFlags, ChannelFlags: edgeUpdateToFail.ChannelFlags, TimeLockDelta: edgeUpdateToFail.TimeLockDelta, HtlcMinimumMsat: edgeUpdateToFail.MinHTLC, HtlcMaximumMsat: edgeUpdateToFail.MaxHTLC, BaseFee: uint32(edgeUpdateToFail.FeeBaseMSat), FeeRate: uint32(edgeUpdateToFail.FeeProportionalMillionths), } // We'll now modify the SendToSwitch method to return an error for the // outgoing channel to Son goku. This will be a fee related error, so // it should only cause the edge to be pruned after the second attempt. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID) if firstHop == roasbeefSongoku { return [32]byte{}, htlcswitch.NewForwardingError( // Within our error, we'll add a // channel update which is meant to // reflect the new fee schedule for the // node/channel. &lnwire.FailFeeInsufficient{ Update: errChanUpdate, }, 1, ) } return preImage, nil }) // Send off the payment request to the router, route through satoshi // should've been selected as a fall back and succeeded correctly. paymentPreImage, route, err := ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("unable to send payment: %v", err) } // The route selected should have two hops if len(route.Hops) != 2 { t.Fatalf("incorrect route length: expected %v got %v", 2, len(route.Hops)) } // The preimage should match up with the once created above. if !bytes.Equal(paymentPreImage[:], preImage[:]) { t.Fatalf("incorrect preimage used: expected %x got %x", preImage[:], paymentPreImage[:]) } // The route should have pham nuwen as the first hop. if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] { t.Fatalf("route should go through satoshi as first hop, "+ "instead passes through: %v", getAliasFromPubKey(route.Hops[0].PubKeyBytes, ctx.aliases)) } } // TestSendPaymentErrorNonFinalTimeLockErrors tests that if we receive either // an ExpiryTooSoon or a IncorrectCltvExpiry error from a node, then we prune // that node from the available graph witin a mission control session. This // test ensures that we'll route around errors due to nodes not knowing the // current block height. func TestSendPaymentErrorNonFinalTimeLockErrors(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Craft a LightningPayment struct that'll send a payment from roasbeef // to sophon for 1k satoshis. var payHash [32]byte amt := lnwire.NewMSatFromSatoshis(1000) payment := LightningPayment{ Target: ctx.aliases["sophon"], Amount: amt, FeeLimit: noFeeLimit, PaymentHash: payHash, } var preImage [32]byte copy(preImage[:], bytes.Repeat([]byte{9}, 32)) // We'll also fetch the first outgoing channel edge from roasbeef to // son goku. This edge will be included in the time lock related expiry // errors that we'll get back due to disagrements in what the current // block height is. chanID := uint64(12345) roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID) _, _, edgeUpdateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID) if err != nil { t.Fatalf("unable to fetch chan id: %v", err) } errChanUpdate := lnwire.ChannelUpdate{ ShortChannelID: lnwire.NewShortChanIDFromInt(chanID), Timestamp: uint32(edgeUpdateToFail.LastUpdate.Unix()), MessageFlags: edgeUpdateToFail.MessageFlags, ChannelFlags: edgeUpdateToFail.ChannelFlags, TimeLockDelta: edgeUpdateToFail.TimeLockDelta, HtlcMinimumMsat: edgeUpdateToFail.MinHTLC, HtlcMaximumMsat: edgeUpdateToFail.MaxHTLC, BaseFee: uint32(edgeUpdateToFail.FeeBaseMSat), FeeRate: uint32(edgeUpdateToFail.FeeProportionalMillionths), } // We'll now modify the SendToSwitch method to return an error for the // outgoing channel to son goku. Since this is a time lock related // error, we should fail the payment flow all together, as Goku is the // only channel to Sophon. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { if firstHop == roasbeefSongoku { return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailExpiryTooSoon{ Update: errChanUpdate, }, 1, ) } return preImage, nil }) // assertExpectedPath is a helper function that asserts the returned // route properly routes around the failure we've introduced in the // graph. assertExpectedPath := func(retPreImage [32]byte, route *route.Route) { // The route selected should have two hops if len(route.Hops) != 2 { t.Fatalf("incorrect route length: expected %v got %v", 2, len(route.Hops)) } // The preimage should match up with the once created above. if !bytes.Equal(retPreImage[:], preImage[:]) { t.Fatalf("incorrect preimage used: expected %x got %x", preImage[:], retPreImage[:]) } // The route should have satoshi as the first hop. if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] { t.Fatalf("route should go through phamnuwen as first hop, "+ "instead passes through: %v", getAliasFromPubKey(route.Hops[0].PubKeyBytes, ctx.aliases)) } } // Send off the payment request to the router, this payment should // succeed as we should actually go through Pham Nuwen in order to get // to Sophon, even though he has higher fees. paymentPreImage, rt, err := ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("unable to send payment: %v", err) } assertExpectedPath(paymentPreImage, rt) // We'll now modify the error return an IncorrectCltvExpiry error // instead, this should result in the same behavior of roasbeef routing // around the faulty Son Goku node. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { if firstHop == roasbeefSongoku { return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailIncorrectCltvExpiry{ Update: errChanUpdate, }, 1, ) } return preImage, nil }) // Once again, Roasbeef should route around Goku since they disagree // w.r.t to the block height, and instead go through Pham Nuwen. We // flip a bit in the payment hash to allow resending this payment. payment.PaymentHash[1] ^= 1 paymentPreImage, rt, err = ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("unable to send payment: %v", err) } assertExpectedPath(paymentPreImage, rt) } // TestSendPaymentErrorPathPruning tests that the send of candidate routes // properly gets pruned in response to ForwardingError response from the // underlying SendToSwitch function. func TestSendPaymentErrorPathPruning(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Craft a LightningPayment struct that'll send a payment from roasbeef // to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees. var payHash [32]byte paymentAmt := lnwire.NewMSatFromSatoshis(1000) payment := LightningPayment{ Target: ctx.aliases["sophon"], Amount: paymentAmt, FeeLimit: noFeeLimit, PaymentHash: payHash, } var preImage [32]byte copy(preImage[:], bytes.Repeat([]byte{9}, 32)) roasbeefSongoku := lnwire.NewShortChanIDFromInt(12345) roasbeefPhanNuwen := lnwire.NewShortChanIDFromInt(999991) // First, we'll modify the SendToSwitch method to return an error // indicating that the channel from roasbeef to son goku is not operable // with an UnknownNextPeer. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { if firstHop == roasbeefSongoku { // We'll first simulate an error from the first // hop to simulate the channel from songoku to // sophon not having enough capacity. return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailTemporaryChannelFailure{}, 1, ) } // Next, we'll create an error from phan nuwen to // indicate that the sophon node is not longer online, // which should prune out the rest of the routes. if firstHop == roasbeefPhanNuwen { return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailUnknownNextPeer{}, 1, ) } return preImage, nil }) ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory() // When we try to dispatch that payment, we should receive an error as // both attempts should fail and cause both routes to be pruned. _, _, err = ctx.router.SendPayment(&payment) if err == nil { t.Fatalf("payment didn't return error") } // The final error returned should also indicate that the peer wasn't // online (the last error we returned). if err != channeldb.FailureReasonNoRoute { t.Fatalf("expected no route instead got: %v", err) } // Inspect the two attempts that were made before the payment failed. p, err := ctx.router.cfg.Control.FetchPayment(payHash) if err != nil { t.Fatal(err) } if len(p.HTLCs) != 2 { t.Fatalf("expected two attempts got %v", len(p.HTLCs)) } // We expect the first attempt to have failed with a // TemporaryChannelFailure, the second with UnknownNextPeer. msg := p.HTLCs[0].Failure.Message if _, ok := msg.(*lnwire.FailTemporaryChannelFailure); !ok { t.Fatalf("unexpected fail message: %T", msg) } msg = p.HTLCs[1].Failure.Message if _, ok := msg.(*lnwire.FailUnknownNextPeer); !ok { t.Fatalf("unexpected fail message: %T", msg) } ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory() // Next, we'll modify the SendToSwitch method to indicate that the // connection between songoku and isn't up. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { if firstHop == roasbeefSongoku { failure := htlcswitch.NewForwardingError( &lnwire.FailUnknownNextPeer{}, 1, ) return [32]byte{}, failure } return preImage, nil }) // This shouldn't return an error, as we'll make a payment attempt via // the pham nuwen channel based on the assumption that there might be an // intermittent issue with the songoku <-> sophon channel. paymentPreImage, rt, err := ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("unable send payment: %v", err) } // This path should go: roasbeef -> pham nuwen -> sophon if len(rt.Hops) != 2 { t.Fatalf("incorrect route length: expected %v got %v", 2, len(rt.Hops)) } if !bytes.Equal(paymentPreImage[:], preImage[:]) { t.Fatalf("incorrect preimage used: expected %x got %x", preImage[:], paymentPreImage[:]) } if rt.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] { t.Fatalf("route should go through phamnuwen as first hop, "+ "instead passes through: %v", getAliasFromPubKey(rt.Hops[0].PubKeyBytes, ctx.aliases)) } ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory() // Finally, we'll modify the SendToSwitch function to indicate that the // roasbeef -> luoji channel has insufficient capacity. This should // again cause us to instead go via the satoshi route. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { if firstHop == roasbeefSongoku { // We'll first simulate an error from the first // outgoing link to simulate the channel from luo ji to // roasbeef not having enough capacity. return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailTemporaryChannelFailure{}, 1, ) } return preImage, nil }) // We flip a bit in the payment hash to allow resending this payment. payment.PaymentHash[1] ^= 1 paymentPreImage, rt, err = ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("unable to send payment: %v", err) } // This should succeed finally. The route selected should have two // hops. if len(rt.Hops) != 2 { t.Fatalf("incorrect route length: expected %v got %v", 2, len(rt.Hops)) } // The preimage should match up with the once created above. if !bytes.Equal(paymentPreImage[:], preImage[:]) { t.Fatalf("incorrect preimage used: expected %x got %x", preImage[:], paymentPreImage[:]) } // The route should have satoshi as the first hop. if rt.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] { t.Fatalf("route should go through phamnuwen as first hop, "+ "instead passes through: %v", getAliasFromPubKey(rt.Hops[0].PubKeyBytes, ctx.aliases)) } } // TestAddProof checks that we can update the channel proof after channel // info was added to the database. func TestAddProof(t *testing.T) { t.Parallel() ctx, cleanup, err := createTestCtxSingleNode(0) if err != nil { t.Fatal(err) } defer cleanup() // Before creating out edge, we'll create two new nodes within the // network that the channel will connect. node1, err := createTestNode() if err != nil { t.Fatal(err) } node2, err := createTestNode() if err != nil { t.Fatal(err) } // In order to be able to add the edge we should have a valid funding // UTXO within the blockchain. fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), 100, 0) if err != nil { t.Fatalf("unable create channel edge: %v", err) } fundingBlock := &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) // After utxo was recreated adding the edge without the proof. edge := &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), NodeKey1Bytes: node1.PubKeyBytes, NodeKey2Bytes: node2.PubKeyBytes, AuthProof: nil, } copy(edge.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed()) copy(edge.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed()) if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("unable to add edge: %v", err) } // Now we'll attempt to update the proof and check that it has been // properly updated. if err := ctx.router.AddProof(*chanID, &testAuthProof); err != nil { t.Fatalf("unable to add proof: %v", err) } info, _, _, err := ctx.router.GetChannelByID(*chanID) if err != nil { t.Fatalf("unable to get channel: %v", err) } if info.AuthProof == nil { t.Fatal("proof have been updated") } } // TestIgnoreNodeAnnouncement tests that adding a node to the router that is // not known from any channel announcement, leads to the announcement being // ignored. func TestIgnoreNodeAnnouncement(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() pub := priv1.PubKey() node := &channeldb.LightningNode{ HaveNodeAnnouncement: true, LastUpdate: time.Unix(123, 0), Addresses: testAddrs, Color: color.RGBA{1, 2, 3, 0}, Alias: "node11", AuthSigBytes: testSig.Serialize(), Features: testFeatures, } copy(node.PubKeyBytes[:], pub.SerializeCompressed()) err = ctx.router.AddNode(node) if !IsError(err, ErrIgnored) { t.Fatalf("expected to get ErrIgnore, instead got: %v", err) } } // TestIgnoreChannelEdgePolicyForUnknownChannel checks that a router will // ignore a channel policy for a channel not in the graph. func TestIgnoreChannelEdgePolicyForUnknownChannel(t *testing.T) { t.Parallel() const startingBlockHeight = 101 // Setup an initially empty network. testChannels := []*testChannel{} testGraph, err := createTestGraphFromChannels( testChannels, "roasbeef", ) if err != nil { t.Fatalf("unable to create graph: %v", err) } defer testGraph.cleanUp() ctx, cleanUp, err := createTestCtxFromGraphInstance( startingBlockHeight, testGraph, ) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() var pub1 [33]byte copy(pub1[:], priv1.PubKey().SerializeCompressed()) var pub2 [33]byte copy(pub2[:], priv2.PubKey().SerializeCompressed()) // Add the edge between the two unknown nodes to the graph, and check // that the nodes are found after the fact. fundingTx, _, chanID, err := createChannelEdge( ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), 10000, 500, ) if err != nil { t.Fatalf("unable to create channel edge: %v", err) } fundingBlock := &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) edge := &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), NodeKey1Bytes: pub1, NodeKey2Bytes: pub2, BitcoinKey1Bytes: pub1, BitcoinKey2Bytes: pub2, AuthProof: nil, } edgePolicy := &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: testTime, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } // Attempt to update the edge. This should be ignored, since the edge // is not yet added to the router. err = ctx.router.UpdateEdge(edgePolicy) if !IsError(err, ErrIgnored) { t.Fatalf("expected to get ErrIgnore, instead got: %v", err) } // Add the edge. if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("expected to be able to add edge to the channel graph,"+ " even though the vertexes were unknown: %v.", err) } // Now updating the edge policy should succeed. if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } } // TestAddEdgeUnknownVertexes tests that if an edge is added that contains two // vertexes which we don't know of, the edge should be available for use // regardless. This is due to the fact that we don't actually need node // announcements for the channel vertexes to be able to use the channel. func TestAddEdgeUnknownVertexes(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile( startingBlockHeight, basicGraphFilePath, ) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() var pub1 [33]byte copy(pub1[:], priv1.PubKey().SerializeCompressed()) var pub2 [33]byte copy(pub2[:], priv2.PubKey().SerializeCompressed()) // The two nodes we are about to add should not exist yet. _, exists1, err := ctx.graph.HasLightningNode(pub1) if err != nil { t.Fatalf("unable to query graph: %v", err) } if exists1 { t.Fatalf("node already existed") } _, exists2, err := ctx.graph.HasLightningNode(pub2) if err != nil { t.Fatalf("unable to query graph: %v", err) } if exists2 { t.Fatalf("node already existed") } // Add the edge between the two unknown nodes to the graph, and check // that the nodes are found after the fact. fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), 10000, 500, ) if err != nil { t.Fatalf("unable to create channel edge: %v", err) } fundingBlock := &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) edge := &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), NodeKey1Bytes: pub1, NodeKey2Bytes: pub2, BitcoinKey1Bytes: pub1, BitcoinKey2Bytes: pub2, AuthProof: nil, } if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("expected to be able to add edge to the channel graph,"+ " even though the vertexes were unknown: %v.", err) } // We must add the edge policy to be able to use the edge for route // finding. edgePolicy := &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: testTime, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } edgePolicy.ChannelFlags = 0 if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } // Create edge in the other direction as well. edgePolicy = &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: testTime, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } edgePolicy.ChannelFlags = 1 if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } // After adding the edge between the two previously unknown nodes, they // should have been added to the graph. _, exists1, err = ctx.graph.HasLightningNode(pub1) if err != nil { t.Fatalf("unable to query graph: %v", err) } if !exists1 { t.Fatalf("node1 was not added to the graph") } _, exists2, err = ctx.graph.HasLightningNode(pub2) if err != nil { t.Fatalf("unable to query graph: %v", err) } if !exists2 { t.Fatalf("node2 was not added to the graph") } // We will connect node1 to the rest of the test graph, and make sure // we can find a route to node2, which will use the just added channel // edge. // We will connect node 1 to "sophon" connectNode := ctx.aliases["sophon"] connectNodeKey, err := btcec.ParsePubKey(connectNode[:], btcec.S256()) if err != nil { t.Fatal(err) } var ( pubKey1 *btcec.PublicKey pubKey2 *btcec.PublicKey ) node1Bytes := priv1.PubKey().SerializeCompressed() node2Bytes := connectNode if bytes.Compare(node1Bytes[:], node2Bytes[:]) == -1 { pubKey1 = priv1.PubKey() pubKey2 = connectNodeKey } else { pubKey1 = connectNodeKey pubKey2 = priv1.PubKey() } fundingTx, _, chanID, err = createChannelEdge(ctx, pubKey1.SerializeCompressed(), pubKey2.SerializeCompressed(), 10000, 510) if err != nil { t.Fatalf("unable to create channel edge: %v", err) } fundingBlock = &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) edge = &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), AuthProof: nil, } copy(edge.NodeKey1Bytes[:], node1Bytes) edge.NodeKey2Bytes = node2Bytes copy(edge.BitcoinKey1Bytes[:], node1Bytes) edge.BitcoinKey2Bytes = node2Bytes if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("unable to add edge to the channel graph: %v.", err) } edgePolicy = &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: testTime, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } edgePolicy.ChannelFlags = 0 if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } edgePolicy = &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: testTime, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } edgePolicy.ChannelFlags = 1 if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } // We should now be able to find a route to node 2. paymentAmt := lnwire.NewMSatFromSatoshis(100) targetNode := priv2.PubKey() var targetPubKeyBytes route.Vertex copy(targetPubKeyBytes[:], targetNode.SerializeCompressed()) _, err = ctx.router.FindRoute( ctx.router.selfNode.PubKeyBytes, targetPubKeyBytes, paymentAmt, noRestrictions, nil, nil, MinCLTVDelta, ) if err != nil { t.Fatalf("unable to find any routes: %v", err) } // Now check that we can update the node info for the partial node // without messing up the channel graph. n1 := &channeldb.LightningNode{ HaveNodeAnnouncement: true, LastUpdate: time.Unix(123, 0), Addresses: testAddrs, Color: color.RGBA{1, 2, 3, 0}, Alias: "node11", AuthSigBytes: testSig.Serialize(), Features: testFeatures, } copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed()) if err := ctx.router.AddNode(n1); err != nil { t.Fatalf("could not add node: %v", err) } n2 := &channeldb.LightningNode{ HaveNodeAnnouncement: true, LastUpdate: time.Unix(123, 0), Addresses: testAddrs, Color: color.RGBA{1, 2, 3, 0}, Alias: "node22", AuthSigBytes: testSig.Serialize(), Features: testFeatures, } copy(n2.PubKeyBytes[:], priv2.PubKey().SerializeCompressed()) if err := ctx.router.AddNode(n2); err != nil { t.Fatalf("could not add node: %v", err) } // Should still be able to find the route, and the info should be // updated. _, err = ctx.router.FindRoute( ctx.router.selfNode.PubKeyBytes, targetPubKeyBytes, paymentAmt, noRestrictions, nil, nil, MinCLTVDelta, ) if err != nil { t.Fatalf("unable to find any routes: %v", err) } copy1, err := ctx.graph.FetchLightningNode(nil, pub1) if err != nil { t.Fatalf("unable to fetch node: %v", err) } if copy1.Alias != n1.Alias { t.Fatalf("fetched node not equal to original") } copy2, err := ctx.graph.FetchLightningNode(nil, pub2) if err != nil { t.Fatalf("unable to fetch node: %v", err) } if copy2.Alias != n2.Alias { t.Fatalf("fetched node not equal to original") } } // TestWakeUpOnStaleBranch tests that upon startup of the ChannelRouter, if the // the chain previously reflected in the channel graph is stale (overtaken by a // longer chain), the channel router will prune the graph for any channels // confirmed on the stale chain, and resync to the main chain. func TestWakeUpOnStaleBranch(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() const chanValue = 10000 // chanID1 will not be reorged out. var chanID1 uint64 // chanID2 will be reorged out. var chanID2 uint64 // Create 10 common blocks, confirming chanID1. for i := uint32(1); i <= 10; i++ { block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } height := startingBlockHeight + i if i == 5 { fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), chanValue, height) if err != nil { t.Fatalf("unable create channel edge: %v", err) } block.Transactions = append(block.Transactions, fundingTx) chanID1 = chanID.ToUint64() } ctx.chain.addBlock(block, height, rand.Uint32()) ctx.chain.setBestBlock(int32(height)) ctx.chainView.notifyBlock(block.BlockHash(), height, []*wire.MsgTx{}) } // Give time to process new blocks time.Sleep(time.Millisecond * 500) _, forkHeight, err := ctx.chain.GetBestBlock() if err != nil { t.Fatalf("unable to ge best block: %v", err) } // Create 10 blocks on the minority chain, confirming chanID2. for i := uint32(1); i <= 10; i++ { block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } height := uint32(forkHeight) + i if i == 5 { fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), chanValue, height) if err != nil { t.Fatalf("unable create channel edge: %v", err) } block.Transactions = append(block.Transactions, fundingTx) chanID2 = chanID.ToUint64() } ctx.chain.addBlock(block, height, rand.Uint32()) ctx.chain.setBestBlock(int32(height)) ctx.chainView.notifyBlock(block.BlockHash(), height, []*wire.MsgTx{}) } // Give time to process new blocks time.Sleep(time.Millisecond * 500) // Now add the two edges to the channel graph, and check that they // correctly show up in the database. node1, err := createTestNode() if err != nil { t.Fatalf("unable to create test node: %v", err) } node2, err := createTestNode() if err != nil { t.Fatalf("unable to create test node: %v", err) } edge1 := &channeldb.ChannelEdgeInfo{ ChannelID: chanID1, NodeKey1Bytes: node1.PubKeyBytes, NodeKey2Bytes: node2.PubKeyBytes, AuthProof: &channeldb.ChannelAuthProof{ NodeSig1Bytes: testSig.Serialize(), NodeSig2Bytes: testSig.Serialize(), BitcoinSig1Bytes: testSig.Serialize(), BitcoinSig2Bytes: testSig.Serialize(), }, } copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed()) copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed()) if err := ctx.router.AddEdge(edge1); err != nil { t.Fatalf("unable to add edge: %v", err) } edge2 := &channeldb.ChannelEdgeInfo{ ChannelID: chanID2, NodeKey1Bytes: node1.PubKeyBytes, NodeKey2Bytes: node2.PubKeyBytes, AuthProof: &channeldb.ChannelAuthProof{ NodeSig1Bytes: testSig.Serialize(), NodeSig2Bytes: testSig.Serialize(), BitcoinSig1Bytes: testSig.Serialize(), BitcoinSig2Bytes: testSig.Serialize(), }, } copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed()) copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed()) if err := ctx.router.AddEdge(edge2); err != nil { t.Fatalf("unable to add edge: %v", err) } // Check that the fundingTxs are in the graph db. _, _, has, isZombie, err := ctx.graph.HasChannelEdge(chanID1) if err != nil { t.Fatalf("error looking for edge: %v", chanID1) } if !has { t.Fatalf("could not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } _, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2) if err != nil { t.Fatalf("error looking for edge: %v", chanID2) } if !has { t.Fatalf("could not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } // Stop the router, so we can reorg the chain while its offline. if err := ctx.router.Stop(); err != nil { t.Fatalf("unable to stop router: %v", err) } // Create a 15 block fork. for i := uint32(1); i <= 15; i++ { block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } height := uint32(forkHeight) + i ctx.chain.addBlock(block, height, rand.Uint32()) ctx.chain.setBestBlock(int32(height)) } // Give time to process new blocks. time.Sleep(time.Millisecond * 500) // Create new router with same graph database. router, err := New(Config{ Graph: ctx.graph, Chain: ctx.chain, ChainView: ctx.chainView, Payer: &mockPaymentAttemptDispatcher{}, Control: makeMockControlTower(), ChannelPruneExpiry: time.Hour * 24, GraphPruneInterval: time.Hour * 2, }) if err != nil { t.Fatalf("unable to create router %v", err) } // It should resync to the longer chain on startup. if err := router.Start(); err != nil { t.Fatalf("unable to start router: %v", err) } // The channel with chanID2 should not be in the database anymore, // since it is not confirmed on the longest chain. chanID1 should // still be. _, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID1) if err != nil { t.Fatalf("error looking for edge: %v", chanID1) } if !has { t.Fatalf("did not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } _, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2) if err != nil { t.Fatalf("error looking for edge: %v", chanID2) } if has { t.Fatalf("found edge in graph") } if isZombie { t.Fatal("reorged edge should not be marked as zombie") } } // TestDisconnectedBlocks checks that the router handles a reorg happening when // it is active. func TestDisconnectedBlocks(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() const chanValue = 10000 // chanID1 will not be reorged out, while chanID2 will be reorged out. var chanID1, chanID2 uint64 // Create 10 common blocks, confirming chanID1. for i := uint32(1); i <= 10; i++ { block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } height := startingBlockHeight + i if i == 5 { fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), chanValue, height) if err != nil { t.Fatalf("unable create channel edge: %v", err) } block.Transactions = append(block.Transactions, fundingTx) chanID1 = chanID.ToUint64() } ctx.chain.addBlock(block, height, rand.Uint32()) ctx.chain.setBestBlock(int32(height)) ctx.chainView.notifyBlock(block.BlockHash(), height, []*wire.MsgTx{}) } // Give time to process new blocks time.Sleep(time.Millisecond * 500) _, forkHeight, err := ctx.chain.GetBestBlock() if err != nil { t.Fatalf("unable to get best block: %v", err) } // Create 10 blocks on the minority chain, confirming chanID2. var minorityChain []*wire.MsgBlock for i := uint32(1); i <= 10; i++ { block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } height := uint32(forkHeight) + i if i == 5 { fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), chanValue, height) if err != nil { t.Fatalf("unable create channel edge: %v", err) } block.Transactions = append(block.Transactions, fundingTx) chanID2 = chanID.ToUint64() } minorityChain = append(minorityChain, block) ctx.chain.addBlock(block, height, rand.Uint32()) ctx.chain.setBestBlock(int32(height)) ctx.chainView.notifyBlock(block.BlockHash(), height, []*wire.MsgTx{}) } // Give time to process new blocks time.Sleep(time.Millisecond * 500) // Now add the two edges to the channel graph, and check that they // correctly show up in the database. node1, err := createTestNode() if err != nil { t.Fatalf("unable to create test node: %v", err) } node2, err := createTestNode() if err != nil { t.Fatalf("unable to create test node: %v", err) } edge1 := &channeldb.ChannelEdgeInfo{ ChannelID: chanID1, NodeKey1Bytes: node1.PubKeyBytes, NodeKey2Bytes: node2.PubKeyBytes, BitcoinKey1Bytes: node1.PubKeyBytes, BitcoinKey2Bytes: node2.PubKeyBytes, AuthProof: &channeldb.ChannelAuthProof{ NodeSig1Bytes: testSig.Serialize(), NodeSig2Bytes: testSig.Serialize(), BitcoinSig1Bytes: testSig.Serialize(), BitcoinSig2Bytes: testSig.Serialize(), }, } copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed()) copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed()) if err := ctx.router.AddEdge(edge1); err != nil { t.Fatalf("unable to add edge: %v", err) } edge2 := &channeldb.ChannelEdgeInfo{ ChannelID: chanID2, NodeKey1Bytes: node1.PubKeyBytes, NodeKey2Bytes: node2.PubKeyBytes, BitcoinKey1Bytes: node1.PubKeyBytes, BitcoinKey2Bytes: node2.PubKeyBytes, AuthProof: &channeldb.ChannelAuthProof{ NodeSig1Bytes: testSig.Serialize(), NodeSig2Bytes: testSig.Serialize(), BitcoinSig1Bytes: testSig.Serialize(), BitcoinSig2Bytes: testSig.Serialize(), }, } copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed()) copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed()) if err := ctx.router.AddEdge(edge2); err != nil { t.Fatalf("unable to add edge: %v", err) } // Check that the fundingTxs are in the graph db. _, _, has, isZombie, err := ctx.graph.HasChannelEdge(chanID1) if err != nil { t.Fatalf("error looking for edge: %v", chanID1) } if !has { t.Fatalf("could not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } _, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2) if err != nil { t.Fatalf("error looking for edge: %v", chanID2) } if !has { t.Fatalf("could not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } // Create a 15 block fork. We first let the chainView notify the router // about stale blocks, before sending the now connected blocks. We do // this because we expect this order from the chainview. for i := len(minorityChain) - 1; i >= 0; i-- { block := minorityChain[i] height := uint32(forkHeight) + uint32(i) + 1 ctx.chainView.notifyStaleBlock(block.BlockHash(), height, block.Transactions) } for i := uint32(1); i <= 15; i++ { block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } height := uint32(forkHeight) + i ctx.chain.addBlock(block, height, rand.Uint32()) ctx.chain.setBestBlock(int32(height)) ctx.chainView.notifyBlock(block.BlockHash(), height, block.Transactions) } // Give time to process new blocks time.Sleep(time.Millisecond * 500) // chanID2 should not be in the database anymore, since it is not // confirmed on the longest chain. chanID1 should still be. _, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID1) if err != nil { t.Fatalf("error looking for edge: %v", chanID1) } if !has { t.Fatalf("did not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } _, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2) if err != nil { t.Fatalf("error looking for edge: %v", chanID2) } if has { t.Fatalf("found edge in graph") } if isZombie { t.Fatal("reorged edge should not be marked as zombie") } } // TestChansClosedOfflinePruneGraph tests that if channels we know of are // closed while we're offline, then once we resume operation of the // ChannelRouter, then the channels are properly pruned. func TestRouterChansClosedOfflinePruneGraph(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() const chanValue = 10000 // First, we'll create a channel, to be mined shortly at height 102. block102 := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } nextHeight := startingBlockHeight + 1 fundingTx1, chanUTXO, chanID1, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), chanValue, uint32(nextHeight)) if err != nil { t.Fatalf("unable create channel edge: %v", err) } block102.Transactions = append(block102.Transactions, fundingTx1) ctx.chain.addBlock(block102, uint32(nextHeight), rand.Uint32()) ctx.chain.setBestBlock(int32(nextHeight)) ctx.chainView.notifyBlock(block102.BlockHash(), uint32(nextHeight), []*wire.MsgTx{}) // We'll now create the edges and nodes within the database required // for the ChannelRouter to properly recognize the channel we added // above. node1, err := createTestNode() if err != nil { t.Fatalf("unable to create test node: %v", err) } node2, err := createTestNode() if err != nil { t.Fatalf("unable to create test node: %v", err) } edge1 := &channeldb.ChannelEdgeInfo{ ChannelID: chanID1.ToUint64(), NodeKey1Bytes: node1.PubKeyBytes, NodeKey2Bytes: node2.PubKeyBytes, AuthProof: &channeldb.ChannelAuthProof{ NodeSig1Bytes: testSig.Serialize(), NodeSig2Bytes: testSig.Serialize(), BitcoinSig1Bytes: testSig.Serialize(), BitcoinSig2Bytes: testSig.Serialize(), }, } copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed()) copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed()) if err := ctx.router.AddEdge(edge1); err != nil { t.Fatalf("unable to add edge: %v", err) } // The router should now be aware of the channel we created above. _, _, hasChan, isZombie, err := ctx.graph.HasChannelEdge(chanID1.ToUint64()) if err != nil { t.Fatalf("error looking for edge: %v", chanID1) } if !hasChan { t.Fatalf("could not find edge in graph") } if isZombie { t.Fatal("edge was marked as zombie") } // With the transaction included, and the router's database state // updated, we'll now mine 5 additional blocks on top of it. for i := 0; i < 5; i++ { nextHeight++ block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32()) ctx.chain.setBestBlock(int32(nextHeight)) ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight), []*wire.MsgTx{}) } // At this point, our starting height should be 107. _, chainHeight, err := ctx.chain.GetBestBlock() if err != nil { t.Fatalf("unable to get best block: %v", err) } if chainHeight != 107 { t.Fatalf("incorrect chain height: expected %v, got %v", 107, chainHeight) } // Next, we'll "shut down" the router in order to simulate downtime. if err := ctx.router.Stop(); err != nil { t.Fatalf("unable to shutdown router: %v", err) } // While the router is "offline" we'll mine 5 additional blocks, with // the second block closing the channel we created above. for i := 0; i < 5; i++ { nextHeight++ block := &wire.MsgBlock{ Transactions: []*wire.MsgTx{}, } if i == 2 { // For the second block, we'll add a transaction that // closes the channel we created above by spending the // output. closingTx := wire.NewMsgTx(2) closingTx.AddTxIn(&wire.TxIn{ PreviousOutPoint: *chanUTXO, }) block.Transactions = append(block.Transactions, closingTx) } ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32()) ctx.chain.setBestBlock(int32(nextHeight)) ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight), []*wire.MsgTx{}) } // At this point, our starting height should be 112. _, chainHeight, err = ctx.chain.GetBestBlock() if err != nil { t.Fatalf("unable to get best block: %v", err) } if chainHeight != 112 { t.Fatalf("incorrect chain height: expected %v, got %v", 112, chainHeight) } // Now we'll re-start the ChannelRouter. It should recognize that it's // behind the main chain and prune all the blocks that it missed while // it was down. ctx.RestartRouter() // At this point, the channel that was pruned should no longer be known // by the router. _, _, hasChan, isZombie, err = ctx.graph.HasChannelEdge(chanID1.ToUint64()) if err != nil { t.Fatalf("error looking for edge: %v", chanID1) } if hasChan { t.Fatalf("channel was found in graph but shouldn't have been") } if isZombie { t.Fatal("closed channel should not be marked as zombie") } } // TestPruneChannelGraphStaleEdges ensures that we properly prune stale edges // from the channel graph. func TestPruneChannelGraphStaleEdges(t *testing.T) { t.Parallel() freshTimestamp := time.Now() staleTimestamp := time.Unix(0, 0) // We'll create the following test graph so that only the last channel // is pruned. testChannels := []*testChannel{ // No edges. { Node1: &testChannelEnd{Alias: "a"}, Node2: &testChannelEnd{Alias: "b"}, Capacity: 100000, ChannelID: 1, }, // Only one edge with a stale timestamp. { Node1: &testChannelEnd{ Alias: "a", testChannelPolicy: &testChannelPolicy{ LastUpdate: staleTimestamp, }, }, Node2: &testChannelEnd{Alias: "b"}, Capacity: 100000, ChannelID: 2, }, // Only one edge with a fresh timestamp. { Node1: &testChannelEnd{ Alias: "a", testChannelPolicy: &testChannelPolicy{ LastUpdate: freshTimestamp, }, }, Node2: &testChannelEnd{Alias: "b"}, Capacity: 100000, ChannelID: 3, }, // One edge fresh, one edge stale. { Node1: &testChannelEnd{ Alias: "c", testChannelPolicy: &testChannelPolicy{ LastUpdate: freshTimestamp, }, }, Node2: &testChannelEnd{ Alias: "d", testChannelPolicy: &testChannelPolicy{ LastUpdate: staleTimestamp, }, }, Capacity: 100000, ChannelID: 4, }, // Both edges fresh. symmetricTestChannel("g", "h", 100000, &testChannelPolicy{ LastUpdate: freshTimestamp, }, 5), // Both edges stale, only one pruned. symmetricTestChannel("e", "f", 100000, &testChannelPolicy{ LastUpdate: staleTimestamp, }, 6), } // We'll create our test graph and router backed with these test // channels we've created. testGraph, err := createTestGraphFromChannels(testChannels, "a") if err != nil { t.Fatalf("unable to create test graph: %v", err) } defer testGraph.cleanUp() const startingHeight = 100 ctx, cleanUp, err := createTestCtxFromGraphInstance( startingHeight, testGraph, ) if err != nil { t.Fatalf("unable to create test context: %v", err) } defer cleanUp() // All of the channels should exist before pruning them. assertChannelsPruned(t, ctx.graph, testChannels) // Proceed to prune the channels - only the last one should be pruned. if err := ctx.router.pruneZombieChans(); err != nil { t.Fatalf("unable to prune zombie channels: %v", err) } prunedChannel := testChannels[len(testChannels)-1].ChannelID assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel) } // TestPruneChannelGraphDoubleDisabled test that we can properly prune channels // with both edges disabled from our channel graph. func TestPruneChannelGraphDoubleDisabled(t *testing.T) { t.Parallel() // We'll create the following test graph so that only the last channel // is pruned. We'll use a fresh timestamp to ensure they're not pruned // according to that heuristic. timestamp := time.Now() testChannels := []*testChannel{ // Channel from self shouldn't be pruned. symmetricTestChannel( "self", "a", 100000, &testChannelPolicy{ LastUpdate: timestamp, Disabled: true, }, 99, ), // No edges. { Node1: &testChannelEnd{Alias: "a"}, Node2: &testChannelEnd{Alias: "b"}, Capacity: 100000, ChannelID: 1, }, // Only one edge disabled. { Node1: &testChannelEnd{ Alias: "a", testChannelPolicy: &testChannelPolicy{ LastUpdate: timestamp, Disabled: true, }, }, Node2: &testChannelEnd{Alias: "b"}, Capacity: 100000, ChannelID: 2, }, // Only one edge enabled. { Node1: &testChannelEnd{ Alias: "a", testChannelPolicy: &testChannelPolicy{ LastUpdate: timestamp, Disabled: false, }, }, Node2: &testChannelEnd{Alias: "b"}, Capacity: 100000, ChannelID: 3, }, // One edge disabled, one edge enabled. { Node1: &testChannelEnd{ Alias: "a", testChannelPolicy: &testChannelPolicy{ LastUpdate: timestamp, Disabled: true, }, }, Node2: &testChannelEnd{ Alias: "b", testChannelPolicy: &testChannelPolicy{ LastUpdate: timestamp, Disabled: false, }, }, Capacity: 100000, ChannelID: 1, }, // Both edges enabled. symmetricTestChannel("c", "d", 100000, &testChannelPolicy{ LastUpdate: timestamp, Disabled: false, }, 2), // Both edges disabled, only one pruned. symmetricTestChannel("e", "f", 100000, &testChannelPolicy{ LastUpdate: timestamp, Disabled: true, }, 3), } // We'll create our test graph and router backed with these test // channels we've created. testGraph, err := createTestGraphFromChannels(testChannels, "self") if err != nil { t.Fatalf("unable to create test graph: %v", err) } defer testGraph.cleanUp() const startingHeight = 100 ctx, cleanUp, err := createTestCtxFromGraphInstance( startingHeight, testGraph, ) if err != nil { t.Fatalf("unable to create test context: %v", err) } defer cleanUp() // All the channels should exist within the graph before pruning them. assertChannelsPruned(t, ctx.graph, testChannels) // If we attempt to prune them without AssumeChannelValid being set, // none should be pruned. if err := ctx.router.pruneZombieChans(); err != nil { t.Fatalf("unable to prune zombie channels: %v", err) } assertChannelsPruned(t, ctx.graph, testChannels) // Now that AssumeChannelValid is set, we'll prune the graph again and // the last channel should be the only one pruned. ctx.router.cfg.AssumeChannelValid = true if err := ctx.router.pruneZombieChans(); err != nil { t.Fatalf("unable to prune zombie channels: %v", err) } prunedChannel := testChannels[len(testChannels)-1].ChannelID assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel) } // TestFindPathFeeWeighting tests that the findPath method will properly prefer // routes with lower fees over routes with lower time lock values. This is // meant to exercise the fact that the internal findPath method ranks edges // with the square of the total fee in order bias towards lower fees. func TestFindPathFeeWeighting(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() var preImage [32]byte copy(preImage[:], bytes.Repeat([]byte{9}, 32)) sourceNode, err := ctx.graph.SourceNode() if err != nil { t.Fatalf("unable to fetch source node: %v", err) } amt := lnwire.MilliSatoshi(100) target := ctx.aliases["luoji"] // We'll now attempt a path finding attempt using this set up. Due to // the edge weighting, we should select the direct path over the 2 hop // path even though the direct path has a higher potential time lock. path, err := dbFindPath( ctx.graph, nil, nil, noRestrictions, testPathFindingConfig, sourceNode.PubKeyBytes, target, amt, 0, ) if err != nil { t.Fatalf("unable to find path: %v", err) } // The route that was chosen should be exactly one hop, and should be // directly to luoji. if len(path) != 1 { t.Fatalf("expected path length of 1, instead was: %v", len(path)) } if path[0].Node.Alias != "luoji" { t.Fatalf("wrong node: %v", path[0].Node.Alias) } } // TestIsStaleNode tests that the IsStaleNode method properly detects stale // node announcements. func TestIsStaleNode(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Before we can insert a node in to the database, we need to create a // channel that it's linked to. var ( pub1 [33]byte pub2 [33]byte ) copy(pub1[:], priv1.PubKey().SerializeCompressed()) copy(pub2[:], priv2.PubKey().SerializeCompressed()) fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), 10000, 500) if err != nil { t.Fatalf("unable to create channel edge: %v", err) } fundingBlock := &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) edge := &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), NodeKey1Bytes: pub1, NodeKey2Bytes: pub2, BitcoinKey1Bytes: pub1, BitcoinKey2Bytes: pub2, AuthProof: nil, } if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("unable to add edge: %v", err) } // Before we add the node, if we query for staleness, we should get // false, as we haven't added the full node. updateTimeStamp := time.Unix(123, 0) if ctx.router.IsStaleNode(pub1, updateTimeStamp) { t.Fatalf("incorrectly detected node as stale") } // With the node stub in the database, we'll add the fully node // announcement to the database. n1 := &channeldb.LightningNode{ HaveNodeAnnouncement: true, LastUpdate: updateTimeStamp, Addresses: testAddrs, Color: color.RGBA{1, 2, 3, 0}, Alias: "node11", AuthSigBytes: testSig.Serialize(), Features: testFeatures, } copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed()) if err := ctx.router.AddNode(n1); err != nil { t.Fatalf("could not add node: %v", err) } // If we use the same timestamp and query for staleness, we should get // true. if !ctx.router.IsStaleNode(pub1, updateTimeStamp) { t.Fatalf("failure to detect stale node update") } // If we update the timestamp and once again query for staleness, it // should report false. newTimeStamp := time.Unix(1234, 0) if ctx.router.IsStaleNode(pub1, newTimeStamp) { t.Fatalf("incorrectly detected node as stale") } } // TestIsKnownEdge tests that the IsKnownEdge method properly detects stale // channel announcements. func TestIsKnownEdge(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // First, we'll create a new channel edge (just the info) and insert it // into the database. var ( pub1 [33]byte pub2 [33]byte ) copy(pub1[:], priv1.PubKey().SerializeCompressed()) copy(pub2[:], priv2.PubKey().SerializeCompressed()) fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), 10000, 500) if err != nil { t.Fatalf("unable to create channel edge: %v", err) } fundingBlock := &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) edge := &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), NodeKey1Bytes: pub1, NodeKey2Bytes: pub2, BitcoinKey1Bytes: pub1, BitcoinKey2Bytes: pub2, AuthProof: nil, } if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("unable to add edge: %v", err) } // Now that the edge has been inserted, query is the router already // knows of the edge should return true. if !ctx.router.IsKnownEdge(*chanID) { t.Fatalf("router should detect edge as known") } } // TestIsStaleEdgePolicy tests that the IsStaleEdgePolicy properly detects // stale channel edge update announcements. func TestIsStaleEdgePolicy(t *testing.T) { t.Parallel() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // First, we'll create a new channel edge (just the info) and insert it // into the database. var ( pub1 [33]byte pub2 [33]byte ) copy(pub1[:], priv1.PubKey().SerializeCompressed()) copy(pub2[:], priv2.PubKey().SerializeCompressed()) fundingTx, _, chanID, err := createChannelEdge(ctx, bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(), 10000, 500) if err != nil { t.Fatalf("unable to create channel edge: %v", err) } fundingBlock := &wire.MsgBlock{ Transactions: []*wire.MsgTx{fundingTx}, } ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight) // If we query for staleness before adding the edge, we should get // false. updateTimeStamp := time.Unix(123, 0) if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) { t.Fatalf("router failed to detect fresh edge policy") } if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) { t.Fatalf("router failed to detect fresh edge policy") } edge := &channeldb.ChannelEdgeInfo{ ChannelID: chanID.ToUint64(), NodeKey1Bytes: pub1, NodeKey2Bytes: pub2, BitcoinKey1Bytes: pub1, BitcoinKey2Bytes: pub2, AuthProof: nil, } if err := ctx.router.AddEdge(edge); err != nil { t.Fatalf("unable to add edge: %v", err) } // We'll also add two edge policies, one for each direction. edgePolicy := &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: updateTimeStamp, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } edgePolicy.ChannelFlags = 0 if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } edgePolicy = &channeldb.ChannelEdgePolicy{ SigBytes: testSig.Serialize(), ChannelID: edge.ChannelID, LastUpdate: updateTimeStamp, TimeLockDelta: 10, MinHTLC: 1, FeeBaseMSat: 10, FeeProportionalMillionths: 10000, } edgePolicy.ChannelFlags = 1 if err := ctx.router.UpdateEdge(edgePolicy); err != nil { t.Fatalf("unable to update edge policy: %v", err) } // Now that the edges have been added, an identical (chanID, flag, // timestamp) tuple for each edge should be detected as a stale edge. if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) { t.Fatalf("router failed to detect stale edge policy") } if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) { t.Fatalf("router failed to detect stale edge policy") } // If we now update the timestamp for both edges, the router should // detect that this tuple represents a fresh edge. updateTimeStamp = time.Unix(9999, 0) if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) { t.Fatalf("router failed to detect fresh edge policy") } if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) { t.Fatalf("router failed to detect fresh edge policy") } } // TestEmptyRoutesGenerateSphinxPacket tests that the generateSphinxPacket // function is able to gracefully handle being passed a nil set of hops for the // route by the caller. func TestEmptyRoutesGenerateSphinxPacket(t *testing.T) { t.Parallel() sessionKey, _ := btcec.NewPrivateKey(btcec.S256()) emptyRoute := &route.Route{} _, _, err := generateSphinxPacket(emptyRoute, testHash[:], sessionKey) if err != route.ErrNoRouteHopsProvided { t.Fatalf("expected empty hops error: instead got: %v", err) } } // TestUnknownErrorSource tests that if the source of an error is unknown, all // edges along the route will be pruned. func TestUnknownErrorSource(t *testing.T) { t.Parallel() // Setup a network. It contains two paths to c: a->b->c and an // alternative a->d->c. chanCapSat := btcutil.Amount(100000) testChannels := []*testChannel{ symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 1), symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 3), symmetricTestChannel("a", "d", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, FeeBaseMsat: 100000, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 2), symmetricTestChannel("d", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, FeeBaseMsat: 100000, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 4), } testGraph, err := createTestGraphFromChannels(testChannels, "a") defer testGraph.cleanUp() if err != nil { t.Fatalf("unable to create graph: %v", err) } const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromGraphInstance(startingBlockHeight, testGraph) defer cleanUp() if err != nil { t.Fatalf("unable to create router: %v", err) } // Create a payment to node c. payment := LightningPayment{ Target: ctx.aliases["c"], Amount: lnwire.NewMSatFromSatoshis(1000), FeeLimit: noFeeLimit, PaymentHash: lntypes.Hash{}, } // We'll modify the SendToSwitch method so that it simulates hop b as a // node that returns an unparsable failure if approached via the a->b // channel. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { // If channel a->b is used, return an error without // source and message. The sender won't know the origin // of the error. if firstHop.ToUint64() == 1 { return [32]byte{}, htlcswitch.ErrUnreadableFailureMessage } // Otherwise the payment succeeds. return lntypes.Preimage{}, nil }) // Send off the payment request to the router. The expectation is that // the route a->b->c is tried first. An unreadable faiure is returned // which should pruning the channel a->b. We expect the payment to // succeed via a->d. _, _, err = ctx.router.SendPayment(&payment) if err != nil { t.Fatalf("expected payment to succeed, but got: %v", err) } // Next we modify payment result to return an unknown failure. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { // If channel a->b is used, simulate that the failure // couldn't be decoded (FailureMessage is nil). if firstHop.ToUint64() == 2 { return [32]byte{}, htlcswitch.NewUnknownForwardingError(1) } // Otherwise the payment succeeds. return lntypes.Preimage{}, nil }) // Send off the payment request to the router. We expect the payment to // fail because both routes have been pruned. payment.PaymentHash = lntypes.Hash{1} _, _, err = ctx.router.SendPayment(&payment) if err == nil { t.Fatalf("expected payment to fail") } } // assertChannelsPruned ensures that only the given channels are pruned from the // graph out of the set of all channels. func assertChannelsPruned(t *testing.T, graph *channeldb.ChannelGraph, channels []*testChannel, prunedChanIDs ...uint64) { t.Helper() pruned := make(map[uint64]struct{}, len(channels)) for _, chanID := range prunedChanIDs { pruned[chanID] = struct{}{} } for _, channel := range channels { _, shouldPrune := pruned[channel.ChannelID] _, _, exists, isZombie, err := graph.HasChannelEdge( channel.ChannelID, ) if err != nil { t.Fatalf("unable to determine existence of "+ "channel=%v in the graph: %v", channel.ChannelID, err) } if !shouldPrune && !exists { t.Fatalf("expected channel=%v to exist within "+ "the graph", channel.ChannelID) } if shouldPrune && exists { t.Fatalf("expected channel=%v to not exist "+ "within the graph", channel.ChannelID) } if !shouldPrune && isZombie { t.Fatalf("expected channel=%v to not be marked "+ "as zombie", channel.ChannelID) } if shouldPrune && !isZombie { t.Fatalf("expected channel=%v to be marked as "+ "zombie", channel.ChannelID) } } } // TestSendToRouteStructuredError asserts that SendToRoute returns a structured // error. func TestSendToRouteStructuredError(t *testing.T) { t.Parallel() // Setup a three node network. chanCapSat := btcutil.Amount(100000) testChannels := []*testChannel{ symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 1), symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 2), } testGraph, err := createTestGraphFromChannels(testChannels, "a") if err != nil { t.Fatalf("unable to create graph: %v", err) } defer testGraph.cleanUp() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromGraphInstance( startingBlockHeight, testGraph, ) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Set up an init channel for the control tower, such that we can make // sure the payment is initiated correctly. init := make(chan initArgs, 1) ctx.router.cfg.Control.(*mockControlTower).init = init // Setup a route from source a to destination c. The route will be used // in a call to SendToRoute. SendToRoute also applies channel updates, // but it saves us from including RequestRoute in the test scope too. const payAmt = lnwire.MilliSatoshi(10000) hop1 := ctx.aliases["b"] hop2 := ctx.aliases["c"] hops := []*route.Hop{ { ChannelID: 1, PubKeyBytes: hop1, AmtToForward: payAmt, LegacyPayload: true, }, { ChannelID: 2, PubKeyBytes: hop2, AmtToForward: payAmt, LegacyPayload: true, }, } rt, err := route.NewRouteFromHops(payAmt, 100, ctx.aliases["a"], hops) if err != nil { t.Fatalf("unable to create route: %v", err) } // We'll modify the SendToSwitch method so that it simulates a failed // payment with an error originating from the first hop of the route. // The unsigned channel update is attached to the failure message. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailFeeInsufficient{ Update: lnwire.ChannelUpdate{}, }, 1, ) }) // The payment parameter is mostly redundant in SendToRoute. Can be left // empty for this test. var payment lntypes.Hash // Send off the payment request to the router. The specified route // should be attempted and the channel update should be received by // router and ignored because it is missing a valid signature. _, err = ctx.router.SendToRoute(payment, rt) fErr, ok := err.(*htlcswitch.ForwardingError) if !ok { t.Fatalf("expected forwarding error") } if _, ok := fErr.WireMessage().(*lnwire.FailFeeInsufficient); !ok { t.Fatalf("expected fee insufficient error") } // Check that the correct values were used when initiating the payment. select { case initVal := <-init: if initVal.c.Value != payAmt { t.Fatalf("expected %v, got %v", payAmt, initVal.c.Value) } case <-time.After(100 * time.Millisecond): t.Fatalf("initPayment not called") } } // TestSendToRouteMultiShardSend checks that a 3-shard payment can be executed // using SendToRoute. func TestSendToRouteMultiShardSend(t *testing.T) { t.Parallel() ctx, cleanup, err := createTestCtxSingleNode(0) if err != nil { t.Fatal(err) } defer cleanup() const numShards = 3 const payAmt = lnwire.MilliSatoshi(numShards * 10000) node, err := createTestNode() if err != nil { t.Fatal(err) } // Create a simple 1-hop route that we will use for all three shards. hops := []*route.Hop{ { ChannelID: 1, PubKeyBytes: node.PubKeyBytes, AmtToForward: payAmt / numShards, MPP: record.NewMPP(payAmt, [32]byte{}), }, } sourceNode, err := ctx.graph.SourceNode() if err != nil { t.Fatal(err) } rt, err := route.NewRouteFromHops( payAmt, 100, sourceNode.PubKeyBytes, hops, ) if err != nil { t.Fatalf("unable to create route: %v", err) } // The first shard we send we'll fail immediately, to check that we are // still allowed to retry with other shards after a failed one. ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { return [32]byte{}, htlcswitch.NewForwardingError( &lnwire.FailFeeInsufficient{ Update: lnwire.ChannelUpdate{}, }, 1, ) }) // The payment parameter is mostly redundant in SendToRoute. Can be left // empty for this test. var payment lntypes.Hash // Send the shard using the created route, and expect an error to be // returned. _, err = ctx.router.SendToRoute(payment, rt) if err == nil { t.Fatalf("expected forwarding error") } // Now we'll modify the SendToSwitch method again to wait until all // three shards are initiated before returning a result. We do this by // signalling when the method has been called, and then stop to wait // for the test to deliver the final result on the channel below. waitForResultSignal := make(chan struct{}, numShards) results := make(chan lntypes.Preimage, numShards) ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult( func(firstHop lnwire.ShortChannelID) ([32]byte, error) { // Signal that the shard has been initiated and is // waiting for a result. waitForResultSignal <- struct{}{} // Wait for a result before returning it. res, ok := <-results if !ok { return [32]byte{}, fmt.Errorf("failure") } return res, nil }) // Launch three shards by calling SendToRoute in three goroutines, // returning their final error on the channel. errChan := make(chan error) successes := make(chan lntypes.Preimage) for i := 0; i < numShards; i++ { go func() { attempt, err := ctx.router.SendToRoute(payment, rt) if err != nil { errChan <- err return } successes <- attempt.Settle.Preimage }() } // Wait for all shards to signal they have been initiated. for i := 0; i < numShards; i++ { select { case <-waitForResultSignal: case <-time.After(5 * time.Second): t.Fatalf("not waiting for results") } } // Deliver a dummy preimage to all the shard handlers. preimage := lntypes.Preimage{} preimage[4] = 42 for i := 0; i < numShards; i++ { results <- preimage } // Finally expect all shards to return with the above preimage. for i := 0; i < numShards; i++ { select { case p := <-successes: if p != preimage { t.Fatalf("preimage mismatch") } case err := <-errChan: t.Fatalf("unexpected error from SendToRoute: %v", err) case <-time.After(5 * time.Second): t.Fatalf("result not received") } } } // TestSendToRouteMaxHops asserts that SendToRoute fails when using a route that // exceeds the maximum number of hops. func TestSendToRouteMaxHops(t *testing.T) { t.Parallel() // Setup a two node network. chanCapSat := btcutil.Amount(100000) testChannels := []*testChannel{ symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 400, MinHTLC: 1, MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 1), } testGraph, err := createTestGraphFromChannels(testChannels, "a") if err != nil { t.Fatalf("unable to create graph: %v", err) } defer testGraph.cleanUp() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromGraphInstance( startingBlockHeight, testGraph, ) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() // Create a 30 hop route that exceeds the maximum hop limit. const payAmt = lnwire.MilliSatoshi(10000) hopA := ctx.aliases["a"] hopB := ctx.aliases["b"] var hops []*route.Hop for i := 0; i < 15; i++ { hops = append(hops, &route.Hop{ ChannelID: 1, PubKeyBytes: hopB, AmtToForward: payAmt, LegacyPayload: true, }) hops = append(hops, &route.Hop{ ChannelID: 1, PubKeyBytes: hopA, AmtToForward: payAmt, LegacyPayload: true, }) } rt, err := route.NewRouteFromHops(payAmt, 100, ctx.aliases["a"], hops) if err != nil { t.Fatalf("unable to create route: %v", err) } // Send off the payment request to the router. We expect an error back // indicating that the route is too long. var payment lntypes.Hash _, err = ctx.router.SendToRoute(payment, rt) if err != route.ErrMaxRouteHopsExceeded { t.Fatalf("expected ErrMaxRouteHopsExceeded, but got %v", err) } } // TestBuildRoute tests whether correct routes are built. func TestBuildRoute(t *testing.T) { // Setup a three node network. chanCapSat := btcutil.Amount(100000) testChannels := []*testChannel{ // Create two local channels from a. The bandwidth is estimated // in this test as the channel capacity. For building routes, we // expected the channel with the largest estimated bandwidth to // be selected. symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 20000, MinHTLC: lnwire.NewMSatFromSatoshis(5), MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 1), symmetricTestChannel("a", "b", chanCapSat/2, &testChannelPolicy{ Expiry: 144, FeeRate: 20000, MinHTLC: lnwire.NewMSatFromSatoshis(5), MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat / 2), }, 6), // Create two channels from b to c. For building routes, we // expect the lowest cost channel to be selected. Note that this // isn't a situation that we are expecting in reality. Routing // nodes are recommended to keep their channel policies towards // the same peer identical. symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 50000, MinHTLC: lnwire.NewMSatFromSatoshis(20), MaxHTLC: lnwire.NewMSatFromSatoshis(120), }, 2), symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 60000, MinHTLC: lnwire.NewMSatFromSatoshis(20), MaxHTLC: lnwire.NewMSatFromSatoshis(120), }, 7), symmetricTestChannel("a", "e", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 80000, MinHTLC: lnwire.NewMSatFromSatoshis(5), MaxHTLC: lnwire.NewMSatFromSatoshis(10), }, 5), symmetricTestChannel("e", "c", chanCapSat, &testChannelPolicy{ Expiry: 144, FeeRate: 100000, MinHTLC: lnwire.NewMSatFromSatoshis(20), MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat), }, 4), } testGraph, err := createTestGraphFromChannels(testChannels, "a") if err != nil { t.Fatalf("unable to create graph: %v", err) } defer testGraph.cleanUp() const startingBlockHeight = 101 ctx, cleanUp, err := createTestCtxFromGraphInstance( startingBlockHeight, testGraph, ) if err != nil { t.Fatalf("unable to create router: %v", err) } defer cleanUp() checkHops := func(rt *route.Route, expected []uint64) { t.Helper() if len(rt.Hops) != len(expected) { t.Fatal("hop count mismatch") } for i, hop := range rt.Hops { if hop.ChannelID != expected[i] { t.Fatalf("expected channel %v at pos %v, but "+ "got channel %v", expected[i], i, hop.ChannelID) } } } // Create hop list from the route node pubkeys. hops := []route.Vertex{ ctx.aliases["b"], ctx.aliases["c"], } amt := lnwire.NewMSatFromSatoshis(100) // Build the route for the given amount. rt, err := ctx.router.BuildRoute( &amt, hops, nil, 40, ) if err != nil { t.Fatal(err) } // Check that we get the expected route back. The total amount should be // the amount to deliver to hop c (100 sats) plus the max fee for the // connection b->c (6 sats). checkHops(rt, []uint64{1, 7}) if rt.TotalAmount != 106000 { t.Fatalf("unexpected total amount %v", rt.TotalAmount) } // Build the route for the minimum amount. rt, err = ctx.router.BuildRoute( nil, hops, nil, 40, ) if err != nil { t.Fatal(err) } // Check that we get the expected route back. The minimum that we can // send from b to c is 20 sats. Hop b charges 1200 msat for the // forwarding. The channel between hop a and b can carry amounts in the // range [5, 100], so 21200 msats is the minimum amount for this route. checkHops(rt, []uint64{1, 7}) if rt.TotalAmount != 21200 { t.Fatalf("unexpected total amount %v", rt.TotalAmount) } // Test a route that contains incompatible channel htlc constraints. // There is no amount that can pass through both channel 5 and 4. hops = []route.Vertex{ ctx.aliases["e"], ctx.aliases["c"], } _, err = ctx.router.BuildRoute( nil, hops, nil, 40, ) errNoChannel, ok := err.(ErrNoChannel) if !ok { t.Fatalf("expected incompatible policies error, but got %v", err) } if errNoChannel.position != 0 { t.Fatalf("unexpected no channel error position") } if errNoChannel.fromNode != ctx.aliases["a"] { t.Fatalf("unexpected no channel error node") } }