package contractcourt import ( "errors" "fmt" "sync" "sync/atomic" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/btcsuite/btcd/wire" "github.com/btcsuite/btcutil" "github.com/lightningnetwork/lnd/chainntnfs" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/input" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwallet/chainfee" "github.com/lightningnetwork/lnd/lnwire" ) // ErrChainArbExiting signals that the chain arbitrator is shutting down. var ErrChainArbExiting = errors.New("ChainArbitrator exiting") // ResolutionMsg is a message sent by resolvers to outside sub-systems once an // outgoing contract has been fully resolved. For multi-hop contracts, if we // resolve the outgoing contract, we'll also need to ensure that the incoming // contract is resolved as well. We package the items required to resolve the // incoming contracts within this message. type ResolutionMsg struct { // SourceChan identifies the channel that this message is being sent // from. This is the channel's short channel ID. SourceChan lnwire.ShortChannelID // HtlcIndex is the index of the contract within the original // commitment trace. HtlcIndex uint64 // Failure will be non-nil if the incoming contract should be canceled // all together. This can happen if the outgoing contract was dust, if // if the outgoing HTLC timed out. Failure lnwire.FailureMessage // PreImage will be non-nil if the incoming contract can successfully // be redeemed. This can happen if we learn of the preimage from the // outgoing HTLC on-chain. PreImage *[32]byte } // ChainArbitratorConfig is a configuration struct that contains all the // function closures and interface that required to arbitrate on-chain // contracts for a particular chain. type ChainArbitratorConfig struct { // ChainHash is the chain that this arbitrator is to operate within. ChainHash chainhash.Hash // IncomingBroadcastDelta is the delta that we'll use to decide when to // broadcast our commitment transaction if we have incoming htlcs. This // value should be set based on our current fee estimation of the // commitment transaction. We use this to determine when we should // broadcast instead of the just the HTLC timeout, as we want to ensure // that the commitment transaction is already confirmed, by the time the // HTLC expires. Otherwise we may end up not settling the htlc on-chain // because the other party managed to time it out. IncomingBroadcastDelta uint32 // OutgoingBroadcastDelta is the delta that we'll use to decide when to // broadcast our commitment transaction if there are active outgoing // htlcs. This value can be lower than the incoming broadcast delta. OutgoingBroadcastDelta uint32 // NewSweepAddr is a function that returns a new address under control // by the wallet. We'll use this to sweep any no-delay outputs as a // result of unilateral channel closes. // // NOTE: This SHOULD return a p2wkh script. NewSweepAddr func() ([]byte, error) // PublishTx reliably broadcasts a transaction to the network. Once // this function exits without an error, then they transaction MUST // continually be rebroadcast if needed. PublishTx func(*wire.MsgTx) error // DeliverResolutionMsg is a function that will append an outgoing // message to the "out box" for a ChannelLink. This is used to cancel // backwards any HTLC's that are either dust, we're timing out, or // settling on-chain to the incoming link. DeliverResolutionMsg func(...ResolutionMsg) error // MarkLinkInactive is a function closure that the ChainArbitrator will // use to mark that active HTLC's shouldn't be attempt ted to be routed // over a particular channel. This function will be called in that a // ChannelArbitrator decides that it needs to go to chain in order to // resolve contracts. // // TODO(roasbeef): rename, routing based MarkLinkInactive func(wire.OutPoint) error // ContractBreach is a function closure that the ChainArbitrator will // use to notify the breachArbiter about a contract breach. It should // only return a non-nil error when the breachArbiter has preserved the // necessary breach info for this channel point, and it is safe to mark // the channel as pending close in the database. ContractBreach func(wire.OutPoint, *lnwallet.BreachRetribution) error // IsOurAddress is a function that returns true if the passed address // is known to the underlying wallet. Otherwise, false should be // returned. IsOurAddress func(btcutil.Address) bool // IncubateOutput sends either an incoming HTLC, an outgoing HTLC, or // both to the utxo nursery. Once this function returns, the nursery // should have safely persisted the outputs to disk, and should start // the process of incubation. This is used when a resolver wishes to // pass off the output to the nursery as we're only waiting on an // absolute/relative item block. IncubateOutputs func(wire.OutPoint, *lnwallet.OutgoingHtlcResolution, *lnwallet.IncomingHtlcResolution, uint32) error // PreimageDB is a global store of all known pre-images. We'll use this // to decide if we should broadcast a commitment transaction to claim // an HTLC on-chain. PreimageDB WitnessBeacon // Notifier is an instance of a chain notifier we'll use to watch for // certain on-chain events. Notifier chainntnfs.ChainNotifier // Signer is a signer backed by the active lnd node. This should be // capable of producing a signature as specified by a valid // SignDescriptor. Signer input.Signer // FeeEstimator will be used to return fee estimates. FeeEstimator chainfee.Estimator // ChainIO allows us to query the state of the current main chain. ChainIO lnwallet.BlockChainIO // DisableChannel disables a channel, resulting in it not being able to // forward payments. DisableChannel func(wire.OutPoint) error // Sweeper allows resolvers to sweep their final outputs. Sweeper UtxoSweeper // Registry is the invoice database that is used by resolvers to lookup // preimages and settle invoices. Registry Registry // NotifyClosedChannel is a function closure that the ChainArbitrator // will use to notify the ChannelNotifier about a newly closed channel. NotifyClosedChannel func(wire.OutPoint) // OnionProcessor is used to decode onion payloads for on-chain // resolution. OnionProcessor OnionProcessor } // ChainArbitrator is a sub-system that oversees the on-chain resolution of all // active, and channel that are in the "pending close" state. Within the // contractcourt package, the ChainArbitrator manages a set of active // ContractArbitrators. Each ContractArbitrators is responsible for watching // the chain for any activity that affects the state of the channel, and also // for monitoring each contract in order to determine if any on-chain activity is // required. Outside sub-systems interact with the ChainArbitrator in order to // forcibly exit a contract, update the set of live signals for each contract, // and to receive reports on the state of contract resolution. type ChainArbitrator struct { started int32 // To be used atomically. stopped int32 // To be used atomically. sync.Mutex // activeChannels is a map of all the active contracts that are still // open, and not fully resolved. activeChannels map[wire.OutPoint]*ChannelArbitrator // activeWatchers is a map of all the active chainWatchers for channels // that are still considered open. activeWatchers map[wire.OutPoint]*chainWatcher // cfg is the config struct for the arbitrator that contains all // methods and interface it needs to operate. cfg ChainArbitratorConfig // chanSource will be used by the ChainArbitrator to fetch all the // active channels that it must still watch over. chanSource *channeldb.DB quit chan struct{} wg sync.WaitGroup } // NewChainArbitrator returns a new instance of the ChainArbitrator using the // passed config struct, and backing persistent database. func NewChainArbitrator(cfg ChainArbitratorConfig, db *channeldb.DB) *ChainArbitrator { return &ChainArbitrator{ cfg: cfg, activeChannels: make(map[wire.OutPoint]*ChannelArbitrator), activeWatchers: make(map[wire.OutPoint]*chainWatcher), chanSource: db, quit: make(chan struct{}), } } // newActiveChannelArbitrator creates a new instance of an active channel // arbitrator given the state of the target channel. func newActiveChannelArbitrator(channel *channeldb.OpenChannel, c *ChainArbitrator, chanEvents *ChainEventSubscription) (*ChannelArbitrator, error) { log.Tracef("Creating ChannelArbitrator for ChannelPoint(%v)", channel.FundingOutpoint) // We'll start by registering for a block epoch notifications so this // channel can keep track of the current state of the main chain. // // TODO(roasbeef): fetch best height (or pass in) so can ensure block // epoch delivers all the notifications to // // TODO(roasbeef): instead 1 block epoch that multi-plexes to the rest? // * reduces the number of goroutines blockEpoch, err := c.cfg.Notifier.RegisterBlockEpochNtfn(nil) if err != nil { return nil, err } chanPoint := channel.FundingOutpoint // Next we'll create the matching configuration struct that contains // all interfaces and methods the arbitrator needs to do its job. arbCfg := ChannelArbitratorConfig{ ChanPoint: chanPoint, ShortChanID: channel.ShortChanID(), BlockEpochs: blockEpoch, ForceCloseChan: func() (*lnwallet.LocalForceCloseSummary, error) { // First, we mark the channel as borked, this ensure // that no new state transitions can happen, and also // that the link won't be loaded into the switch. if err := channel.MarkBorked(); err != nil { return nil, err } // With the channel marked as borked, we'll now remove // the link from the switch if its there. If the link // is active, then this method will block until it // exits. if err := c.cfg.MarkLinkInactive(chanPoint); err != nil { log.Errorf("unable to mark link inactive: %v", err) } // Now that we know the link can't mutate the channel // state, we'll read the channel from disk the target // channel according to its channel point. channel, err := c.chanSource.FetchChannel(chanPoint) if err != nil { return nil, err } // Finally, we'll force close the channel completing // the force close workflow. chanMachine, err := lnwallet.NewLightningChannel( c.cfg.Signer, channel, nil, ) if err != nil { return nil, err } return chanMachine.ForceClose() }, MarkCommitmentBroadcasted: channel.MarkCommitmentBroadcasted, MarkChannelClosed: func(summary *channeldb.ChannelCloseSummary) error { if err := channel.CloseChannel(summary); err != nil { return err } c.cfg.NotifyClosedChannel(summary.ChanPoint) return nil }, IsPendingClose: false, ChainArbitratorConfig: c.cfg, ChainEvents: chanEvents, } // The final component needed is an arbitrator log that the arbitrator // will use to keep track of its internal state using a backed // persistent log. // // TODO(roasbeef); abstraction leak... // * rework: adaptor method to set log scope w/ factory func chanLog, err := newBoltArbitratorLog( c.chanSource.DB, arbCfg, c.cfg.ChainHash, chanPoint, ) if err != nil { blockEpoch.Cancel() return nil, err } arbCfg.MarkChannelResolved = func() error { return c.ResolveContract(chanPoint) } // Finally, we'll need to construct a series of htlc Sets based on all // currently known valid commitments. htlcSets := make(map[HtlcSetKey]htlcSet) htlcSets[LocalHtlcSet] = newHtlcSet(channel.LocalCommitment.Htlcs) htlcSets[RemoteHtlcSet] = newHtlcSet(channel.RemoteCommitment.Htlcs) pendingRemoteCommitment, err := channel.RemoteCommitChainTip() if err != nil && err != channeldb.ErrNoPendingCommit { blockEpoch.Cancel() return nil, err } if pendingRemoteCommitment != nil { htlcSets[RemotePendingHtlcSet] = newHtlcSet( pendingRemoteCommitment.Commitment.Htlcs, ) } return NewChannelArbitrator( arbCfg, htlcSets, chanLog, ), nil } // ResolveContract marks a contract as fully resolved within the database. // This is only to be done once all contracts which were live on the channel // before hitting the chain have been resolved. func (c *ChainArbitrator) ResolveContract(chanPoint wire.OutPoint) error { log.Infof("Marking ChannelPoint(%v) fully resolved", chanPoint) // First, we'll we'll mark the channel as fully closed from the PoV of // the channel source. err := c.chanSource.MarkChanFullyClosed(&chanPoint) if err != nil { log.Errorf("ChainArbitrator: unable to mark ChannelPoint(%v) "+ "fully closed: %v", chanPoint, err) return err } // Now that the channel has been marked as fully closed, we'll stop // both the channel arbitrator and chain watcher for this channel if // they're still active. var arbLog ArbitratorLog c.Lock() chainArb := c.activeChannels[chanPoint] delete(c.activeChannels, chanPoint) chainWatcher := c.activeWatchers[chanPoint] delete(c.activeWatchers, chanPoint) c.Unlock() if chainArb != nil { arbLog = chainArb.log if err := chainArb.Stop(); err != nil { log.Warnf("unable to stop ChannelArbitrator(%v): %v", chanPoint, err) } } if chainWatcher != nil { if err := chainWatcher.Stop(); err != nil { log.Warnf("unable to stop ChainWatcher(%v): %v", chanPoint, err) } } // Once this has been marked as resolved, we'll wipe the log that the // channel arbitrator was using to store its persistent state. We do // this after marking the channel resolved, as otherwise, the // arbitrator would be re-created, and think it was starting from the // default state. if arbLog != nil { if err := arbLog.WipeHistory(); err != nil { return err } } return nil } // Start launches all goroutines that the ChainArbitrator needs to operate. func (c *ChainArbitrator) Start() error { if !atomic.CompareAndSwapInt32(&c.started, 0, 1) { return nil } log.Tracef("Starting ChainArbitrator") // First, we'll fetch all the channels that are still open, in order to // collect them within our set of active contracts. openChannels, err := c.chanSource.FetchAllChannels() if err != nil { return err } if len(openChannels) > 0 { log.Infof("Creating ChannelArbitrators for %v active channels", len(openChannels)) } // For each open channel, we'll configure then launch a corresponding // ChannelArbitrator. for _, channel := range openChannels { chanPoint := channel.FundingOutpoint channel := channel // First, we'll create an active chainWatcher for this channel // to ensure that we detect any relevant on chain events. chainWatcher, err := newChainWatcher( chainWatcherConfig{ chanState: channel, notifier: c.cfg.Notifier, signer: c.cfg.Signer, isOurAddr: c.cfg.IsOurAddress, contractBreach: func(retInfo *lnwallet.BreachRetribution) error { return c.cfg.ContractBreach(chanPoint, retInfo) }, extractStateNumHint: lnwallet.GetStateNumHint, }, ) if err != nil { return err } c.activeWatchers[chanPoint] = chainWatcher channelArb, err := newActiveChannelArbitrator( channel, c, chainWatcher.SubscribeChannelEvents(), ) if err != nil { return err } c.activeChannels[chanPoint] = channelArb // If the channel has had its commitment broadcasted already, // republish it in case it didn't propagate. if !channel.HasChanStatus( channeldb.ChanStatusCommitBroadcasted, ) { continue } closeTx, err := channel.BroadcastedCommitment() switch { // This can happen for channels that had their closing tx // published before we started storing it to disk. case err == channeldb.ErrNoCloseTx: log.Warnf("Channel %v is in state CommitBroadcasted, "+ "but no closing tx to re-publish...", chanPoint) continue case err != nil: return err } log.Infof("Re-publishing closing tx(%v) for channel %v", closeTx.TxHash(), chanPoint) err = c.cfg.PublishTx(closeTx) if err != nil && err != lnwallet.ErrDoubleSpend { log.Warnf("Unable to broadcast close tx(%v): %v", closeTx.TxHash(), err) } } // In addition to the channels that we know to be open, we'll also // launch arbitrators to finishing resolving any channels that are in // the pending close state. closingChannels, err := c.chanSource.FetchClosedChannels(true) if err != nil { return err } if len(closingChannels) > 0 { log.Infof("Creating ChannelArbitrators for %v closing channels", len(closingChannels)) } // Next, for each channel is the closing state, we'll launch a // corresponding more restricted resolver, as we don't have to watch // the chain any longer, only resolve the contracts on the confirmed // commitment. for _, closeChanInfo := range closingChannels { blockEpoch, err := c.cfg.Notifier.RegisterBlockEpochNtfn(nil) if err != nil { return err } // We can leave off the CloseContract and ForceCloseChan // methods as the channel is already closed at this point. chanPoint := closeChanInfo.ChanPoint arbCfg := ChannelArbitratorConfig{ ChanPoint: chanPoint, ShortChanID: closeChanInfo.ShortChanID, BlockEpochs: blockEpoch, ChainArbitratorConfig: c.cfg, ChainEvents: &ChainEventSubscription{}, IsPendingClose: true, ClosingHeight: closeChanInfo.CloseHeight, CloseType: closeChanInfo.CloseType, } chanLog, err := newBoltArbitratorLog( c.chanSource.DB, arbCfg, c.cfg.ChainHash, chanPoint, ) if err != nil { blockEpoch.Cancel() return err } arbCfg.MarkChannelResolved = func() error { return c.ResolveContract(chanPoint) } // We can also leave off the set of HTLC's here as since the // channel is already in the process of being full resolved, no // new HTLC's will be added. c.activeChannels[chanPoint] = NewChannelArbitrator( arbCfg, nil, chanLog, ) } // Now, we'll start all chain watchers in parallel to shorten start up // duration. In neutrino mode, this allows spend registrations to take // advantage of batch spend reporting, instead of doing a single rescan // per chain watcher. // // NOTE: After this point, we Stop the chain arb to ensure that any // lingering goroutines are cleaned up before exiting. watcherErrs := make(chan error, len(c.activeWatchers)) var wg sync.WaitGroup for _, watcher := range c.activeWatchers { wg.Add(1) go func(w *chainWatcher) { defer wg.Done() select { case watcherErrs <- w.Start(): case <-c.quit: watcherErrs <- ErrChainArbExiting } }(watcher) } // Once all chain watchers have been started, seal the err chan to // signal the end of the err stream. go func() { wg.Wait() close(watcherErrs) }() // Handle all errors returned from spawning our chain watchers. If any // of them failed, we will stop the chain arb to shutdown any active // goroutines. for err := range watcherErrs { if err != nil { c.Stop() return err } } // Finally, we'll launch all the goroutines for each arbitrator so they // can carry out their duties. for _, arbitrator := range c.activeChannels { if err := arbitrator.Start(); err != nil { c.Stop() return err } } // TODO(roasbeef): eventually move all breach watching here return nil } // Stop signals the ChainArbitrator to trigger a graceful shutdown. Any active // channel arbitrators will be signalled to exit, and this method will block // until they've all exited. func (c *ChainArbitrator) Stop() error { if !atomic.CompareAndSwapInt32(&c.stopped, 0, 1) { return nil } log.Infof("Stopping ChainArbitrator") close(c.quit) var ( activeWatchers = make(map[wire.OutPoint]*chainWatcher) activeChannels = make(map[wire.OutPoint]*ChannelArbitrator) ) // Copy the current set of active watchers and arbitrators to shutdown. // We don't want to hold the lock when shutting down each watcher or // arbitrator individually, as they may need to acquire this mutex. c.Lock() for chanPoint, watcher := range c.activeWatchers { activeWatchers[chanPoint] = watcher } for chanPoint, arbitrator := range c.activeChannels { activeChannels[chanPoint] = arbitrator } c.Unlock() for chanPoint, watcher := range activeWatchers { log.Tracef("Attempting to stop ChainWatcher(%v)", chanPoint) if err := watcher.Stop(); err != nil { log.Errorf("unable to stop watcher for "+ "ChannelPoint(%v): %v", chanPoint, err) } } for chanPoint, arbitrator := range activeChannels { log.Tracef("Attempting to stop ChannelArbitrator(%v)", chanPoint) if err := arbitrator.Stop(); err != nil { log.Errorf("unable to stop arbitrator for "+ "ChannelPoint(%v): %v", chanPoint, err) } } c.wg.Wait() return nil } // ContractUpdate is a message packages the latest set of active HTLCs on a // commitment, and also identifies which commitment received a new set of // HTLCs. type ContractUpdate struct { // HtlcKey identifies which commitment the HTLCs below are present on. HtlcKey HtlcSetKey // Htlcs are the of active HTLCs on the commitment identified by the // above HtlcKey. Htlcs []channeldb.HTLC } // ContractSignals wraps the two signals that affect the state of a channel // being watched by an arbitrator. The two signals we care about are: the // channel has a new set of HTLC's, and the remote party has just broadcast // their version of the commitment transaction. type ContractSignals struct { // HtlcUpdates is a channel that the link will use to update the // designated channel arbitrator when the set of HTLCs on any valid // commitment changes. HtlcUpdates chan *ContractUpdate // ShortChanID is the up to date short channel ID for a contract. This // can change either if when the contract was added it didn't yet have // a stable identifier, or in the case of a reorg. ShortChanID lnwire.ShortChannelID } // UpdateContractSignals sends a set of active, up to date contract signals to // the ChannelArbitrator which is has been assigned to the channel infield by // the passed channel point. func (c *ChainArbitrator) UpdateContractSignals(chanPoint wire.OutPoint, signals *ContractSignals) error { log.Infof("Attempting to update ContractSignals for ChannelPoint(%v)", chanPoint) c.Lock() arbitrator, ok := c.activeChannels[chanPoint] c.Unlock() if !ok { return fmt.Errorf("unable to find arbitrator") } arbitrator.UpdateContractSignals(signals) return nil } // GetChannelArbitrator safely returns the channel arbitrator for a given // channel outpoint. func (c *ChainArbitrator) GetChannelArbitrator(chanPoint wire.OutPoint) ( *ChannelArbitrator, error) { c.Lock() arbitrator, ok := c.activeChannels[chanPoint] c.Unlock() if !ok { return nil, fmt.Errorf("unable to find arbitrator") } return arbitrator, nil } // forceCloseReq is a request sent from an outside sub-system to the arbitrator // that watches a particular channel to broadcast the commitment transaction, // and enter the resolution phase of the channel. type forceCloseReq struct { // errResp is a channel that will be sent upon either in the case of // force close success (nil error), or in the case on an error. // // NOTE; This channel MUST be buffered. errResp chan error // closeTx is a channel that carries the transaction which ultimately // closed out the channel. closeTx chan *wire.MsgTx } // ForceCloseContract attempts to force close the channel infield by the passed // channel point. A force close will immediately terminate the contract, // causing it to enter the resolution phase. If the force close was successful, // then the force close transaction itself will be returned. // // TODO(roasbeef): just return the summary itself? func (c *ChainArbitrator) ForceCloseContract(chanPoint wire.OutPoint) (*wire.MsgTx, error) { c.Lock() arbitrator, ok := c.activeChannels[chanPoint] c.Unlock() if !ok { return nil, fmt.Errorf("unable to find arbitrator") } log.Infof("Attempting to force close ChannelPoint(%v)", chanPoint) // Before closing, we'll attempt to send a disable update for the // channel. We do so before closing the channel as otherwise the current // edge policy won't be retrievable from the graph. if err := c.cfg.DisableChannel(chanPoint); err != nil { log.Warnf("Unable to disable channel %v on "+ "close: %v", chanPoint, err) } errChan := make(chan error, 1) respChan := make(chan *wire.MsgTx, 1) // With the channel found, and the request crafted, we'll send over a // force close request to the arbitrator that watches this channel. select { case arbitrator.forceCloseReqs <- &forceCloseReq{ errResp: errChan, closeTx: respChan, }: case <-c.quit: return nil, ErrChainArbExiting } // We'll await two responses: the error response, and the transaction // that closed out the channel. select { case err := <-errChan: if err != nil { return nil, err } case <-c.quit: return nil, ErrChainArbExiting } var closeTx *wire.MsgTx select { case closeTx = <-respChan: case <-c.quit: return nil, ErrChainArbExiting } return closeTx, nil } // WatchNewChannel sends the ChainArbitrator a message to create a // ChannelArbitrator tasked with watching over a new channel. Once a new // channel has finished its final funding flow, it should be registered with // the ChainArbitrator so we can properly react to any on-chain events. func (c *ChainArbitrator) WatchNewChannel(newChan *channeldb.OpenChannel) error { c.Lock() defer c.Unlock() log.Infof("Creating new ChannelArbitrator for ChannelPoint(%v)", newChan.FundingOutpoint) // If we're already watching this channel, then we'll ignore this // request. chanPoint := newChan.FundingOutpoint if _, ok := c.activeChannels[chanPoint]; ok { return nil } // First, also create an active chainWatcher for this channel to ensure // that we detect any relevant on chain events. chainWatcher, err := newChainWatcher( chainWatcherConfig{ chanState: newChan, notifier: c.cfg.Notifier, signer: c.cfg.Signer, isOurAddr: c.cfg.IsOurAddress, contractBreach: func(retInfo *lnwallet.BreachRetribution) error { return c.cfg.ContractBreach(chanPoint, retInfo) }, extractStateNumHint: lnwallet.GetStateNumHint, }, ) if err != nil { return err } c.activeWatchers[newChan.FundingOutpoint] = chainWatcher // We'll also create a new channel arbitrator instance using this new // channel, and our internal state. channelArb, err := newActiveChannelArbitrator( newChan, c, chainWatcher.SubscribeChannelEvents(), ) if err != nil { return err } // With the arbitrator created, we'll add it to our set of active // arbitrators, then launch it. c.activeChannels[chanPoint] = channelArb if err := channelArb.Start(); err != nil { return err } return chainWatcher.Start() } // SubscribeChannelEvents returns a new active subscription for the set of // possible on-chain events for a particular channel. The struct can be used by // callers to be notified whenever an event that changes the state of the // channel on-chain occurs. func (c *ChainArbitrator) SubscribeChannelEvents( chanPoint wire.OutPoint) (*ChainEventSubscription, error) { // First, we'll attempt to look up the active watcher for this channel. // If we can't find it, then we'll return an error back to the caller. watcher, ok := c.activeWatchers[chanPoint] if !ok { return nil, fmt.Errorf("unable to find watcher for: %v", chanPoint) } // With the watcher located, we'll request for it to create a new chain // event subscription client. return watcher.SubscribeChannelEvents(), nil } // TODO(roasbeef): arbitration reports // * types: contested, waiting for success conf, etc