package main import ( "bytes" "container/list" "crypto/sha256" "fmt" "net" "strings" "sync" "sync/atomic" "time" "github.com/davecgh/go-spew/spew" "github.com/go-errors/errors" "github.com/lightningnetwork/lightning-onion" "github.com/lightningnetwork/lnd/brontide" "github.com/lightningnetwork/lnd/chainntnfs" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lnrpc" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/roasbeef/btcd/btcec" "github.com/roasbeef/btcd/chaincfg/chainhash" "github.com/roasbeef/btcd/connmgr" "github.com/roasbeef/btcd/txscript" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcutil" ) var ( numNodes int32 ) const ( // pingInterval is the interval at which ping messages are sent. pingInterval = 1 * time.Minute // outgoingQueueLen is the buffer size of the channel which houses // messages to be sent across the wire, requested by objects outside // this struct. outgoingQueueLen = 50 ) // outgoinMsg packages an lnwire.Message to be sent out on the wire, along with // a buffered channel which will be sent upon once the write is complete. This // buffered channel acts as a semaphore to be used for synchronization purposes. type outgoinMsg struct { msg lnwire.Message sentChan chan struct{} // MUST be buffered. } // newChannelMsg packages a lnwallet.LightningChannel with a channel that // allows the receiver of the request to report when the funding transaction // has been confirmed and the channel creation process completed. type newChannelMsg struct { channel *lnwallet.LightningChannel done chan struct{} } // chanSnapshotReq is a message sent by outside subsystems to a peer in order // to gain a snapshot of the peer's currently active channels. type chanSnapshotReq struct { resp chan []*channeldb.ChannelSnapshot } // peer is an active peer on the Lightning Network. This struct is responsible // for managing any channel state related to this peer. To do so, it has // several helper goroutines to handle events such as HTLC timeouts, new // funding workflow, and detecting an uncooperative closure of any active // channels. // TODO(roasbeef): proper reconnection logic type peer struct { // The following fields are only meant to be used *atomically* bytesReceived uint64 bytesSent uint64 // pingTime is a rough estimate of the RTT (round-trip-time) between us // and the connected peer. This time is expressed in micro seconds. // TODO(roasbeef): also use a WMA or EMA? pingTime int64 // pingLastSend is the Unix time expressed in nanoseconds when we sent // our last ping message. pingLastSend int64 // MUST be used atomically. started int32 disconnect int32 connReq *connmgr.ConnReq conn net.Conn addr *lnwire.NetAddress lightningID chainhash.Hash inbound bool id int32 // This mutex protects all the stats below it. sync.RWMutex timeConnected time.Time lastSend time.Time lastRecv time.Time // sendQueue is the channel which is used to queue outgoing to be // written onto the wire. Note that this channel is unbuffered. sendQueue chan outgoinMsg // outgoingQueue is a buffered channel which allows second/third party // objects to queue messages to be sent out on the wire. outgoingQueue chan outgoinMsg // sendQueueSync is used as a semaphore to synchronize writes between // the writeHandler and the queueHandler. sendQueueSync chan struct{} // activeChannels is a map which stores the state machines of all // active channels. Channels are indexed into the map by the txid of // the funding transaction which opened the channel. activeChanMtx sync.RWMutex activeChannels map[lnwire.ChannelID]*lnwallet.LightningChannel chanSnapshotReqs chan *chanSnapshotReq htlcManMtx sync.RWMutex htlcManagers map[lnwire.ChannelID]chan lnwire.Message // newChannels is used by the fundingManager to send fully opened // channels to the source peer which handled the funding workflow. newChannels chan *newChannelMsg // localCloseChanReqs is a channel in which any local requests to close // a particular channel are sent over. localCloseChanReqs chan *closeLinkReq // remoteCloseChanReqs is a channel in which any remote requests // (initiated by the remote peer) close a particular channel are sent // over. remoteCloseChanReqs chan *lnwire.CloseRequest server *server // localSharedFeatures is a product of comparison of our and their // local features vectors which consist of features which are present // on both sides. localSharedFeatures *lnwire.SharedFeatures // globalSharedFeatures is a product of comparison of our and their // global features vectors which consist of features which are present // on both sides. globalSharedFeatures *lnwire.SharedFeatures queueQuit chan struct{} quit chan struct{} wg sync.WaitGroup } // newPeer creates a new peer from an establish connection object, and a // pointer to the main server. func newPeer(conn net.Conn, connReq *connmgr.ConnReq, server *server, addr *lnwire.NetAddress, inbound bool) (*peer, error) { nodePub := addr.IdentityKey p := &peer{ conn: conn, lightningID: chainhash.Hash(sha256.Sum256(nodePub.SerializeCompressed())), addr: addr, id: atomic.AddInt32(&numNodes, 1), inbound: inbound, connReq: connReq, server: server, sendQueueSync: make(chan struct{}, 1), sendQueue: make(chan outgoinMsg, 1), outgoingQueue: make(chan outgoinMsg, outgoingQueueLen), activeChannels: make(map[lnwire.ChannelID]*lnwallet.LightningChannel), htlcManagers: make(map[lnwire.ChannelID]chan lnwire.Message), chanSnapshotReqs: make(chan *chanSnapshotReq), newChannels: make(chan *newChannelMsg, 1), localCloseChanReqs: make(chan *closeLinkReq), remoteCloseChanReqs: make(chan *lnwire.CloseRequest), localSharedFeatures: nil, globalSharedFeatures: nil, queueQuit: make(chan struct{}), quit: make(chan struct{}), } return p, nil } // Start starts all helper goroutines the peer needs for normal operations. In // the case this peer has already been started, then this function is a loop. func (p *peer) Start() error { if atomic.AddInt32(&p.started, 1) != 1 { return nil } peerLog.Tracef("peer %v starting", p) // Exchange local and global features, the init message should be very // first between two nodes. if err := p.sendInitMsg(); err != nil { return fmt.Errorf("unable to send init msg: %v", err) } // Before we launch any of the helper goroutines off the peer struct, // we'll first ensure proper adherence to the p2p protocol. The init // message MUST be sent before any other message. readErr := make(chan error, 1) msgChan := make(chan lnwire.Message, 1) go func() { msg, err := p.readNextMessage() if err != nil { readErr <- err msgChan <- nil } readErr <- nil msgChan <- msg }() select { // In order to avoid blocking indefinitely, we'll give the other peer // an upper timeout of 15 seconds to respond before we bail out early. case <-time.After(time.Second * 15): return fmt.Errorf("peer did not complete handshake within 5 " + "seconds") case err := <-readErr: if err != nil { return fmt.Errorf("unable to read init msg: %v", err) } } // Once the init message arrives, we can parse it so we can figure out // the negotiation of features for this session. msg := <-msgChan if msg, ok := msg.(*lnwire.Init); ok { if err := p.handleInitMsg(msg); err != nil { return err } } else { return errors.New("very first message between nodes " + "must be init message") } // Fetch and then load all the active channels we have with this remote // peer from the database. activeChans, err := p.server.chanDB.FetchOpenChannels(p.addr.IdentityKey) if err != nil { peerLog.Errorf("unable to fetch active chans "+ "for peer %v: %v", p, err) return err } // Next, load all the active channels we have with this peer, // registering them with the switch and launching the necessary // goroutines required to operate them. peerLog.Debugf("Loaded %v active channels from database with "+ "peerID(%v)", len(activeChans), p.id) if err := p.loadActiveChannels(activeChans); err != nil { return fmt.Errorf("unable to load channels: %v", err) } p.wg.Add(5) go p.queueHandler() go p.writeHandler() go p.readHandler() go p.channelManager() go p.pingHandler() return nil } // loadActiveChannels creates indexes within the peer for tracking all active // channels returned by the database. func (p *peer) loadActiveChannels(chans []*channeldb.OpenChannel) error { for _, dbChan := range chans { // If the channel isn't yet open, then we don't need to process // it any further. if dbChan.IsPending { continue } lnChan, err := lnwallet.NewLightningChannel(p.server.lnwallet.Signer, p.server.chainNotifier, p.server.feeEstimator, dbChan) if err != nil { return err } chanPoint := *dbChan.ChanID chanID := lnwire.NewChanIDFromOutPoint(&chanPoint) p.activeChanMtx.Lock() p.activeChannels[chanID] = lnChan p.activeChanMtx.Unlock() peerLog.Infof("peerID(%v) loaded ChannelPoint(%v)", p.id, chanPoint) p.server.breachArbiter.newContracts <- lnChan // Register this new channel link with the HTLC Switch. This is // necessary to properly route multi-hop payments, and forward // new payments triggered by RPC clients. downstreamLink := make(chan *htlcPacket, 10) plexChan := p.server.htlcSwitch.RegisterLink(p, dbChan.Snapshot(), downstreamLink) upstreamLink := make(chan lnwire.Message, 10) p.htlcManMtx.Lock() p.htlcManagers[chanID] = upstreamLink p.htlcManMtx.Unlock() p.wg.Add(1) go p.htlcManager(lnChan, plexChan, downstreamLink, upstreamLink) } return nil } // WaitForDisconnect waits until the peer has disconnected. A peer may be // disconnected if the local or remote side terminating the connection, or an // irrecoverable protocol error has been encountered. func (p *peer) WaitForDisconnect() { <-p.quit } // Disconnect terminates the connection with the remote peer. Additionally, a // signal is sent to the server and htlcSwitch indicating the resources // allocated to the peer can now be cleaned up. func (p *peer) Disconnect() { if !atomic.CompareAndSwapInt32(&p.disconnect, 0, 1) { return } peerLog.Tracef("Disconnecting %s", p) // Ensure that the TCP connection is properly closed before continuing. p.conn.Close() close(p.quit) } // String returns the string representation of this peer. func (p *peer) String() string { return p.conn.RemoteAddr().String() } // readNextMessage reads, and returns the next message on the wire along with // any additional raw payload. func (p *peer) readNextMessage() (lnwire.Message, error) { noiseConn, ok := p.conn.(*brontide.Conn) if !ok { return nil, fmt.Errorf("brontide.Conn required to read messages") } // First we'll read the next _full_ message. We do this rather than // reading incrementally from the stream as the Lightning wire protocol // is message oriented and allows nodes to pad on additional data to // the message stream. rawMsg, err := noiseConn.ReadNextMessage() atomic.AddUint64(&p.bytesReceived, uint64(len(rawMsg))) if err != nil { return nil, err } // Next, create a new io.Reader implementation from the raw message, // and use this to decode the message directly from. msgReader := bytes.NewReader(rawMsg) nextMsg, err := lnwire.ReadMessage(msgReader, 0) if err != nil { return nil, err } // TODO(roasbeef): add message summaries p.logWireMessage(nextMsg, true) return nextMsg, nil } // readHandler is responsible for reading messages off the wire in series, then // properly dispatching the handling of the message to the proper subsystem. // // NOTE: This method MUST be run as a goroutine. func (p *peer) readHandler() { var activeChanMtx sync.Mutex activeChanStreams := make(map[lnwire.ChannelID]struct{}) out: for atomic.LoadInt32(&p.disconnect) == 0 { nextMsg, err := p.readNextMessage() if err != nil { peerLog.Infof("unable to read message from %v: %v", p, err) switch err.(type) { // If this is just a message we don't yet recognize, // we'll continue processing as normal as this allows // us to introduce new messages in a forwards // compatible manner. case *lnwire.UnknownMessage: continue // If the error we encountered wasn't just a message we // didn't recognize, then we'll stop all processing s // this is a fatal error. default: break out } } var ( isChanUpdate bool targetChan lnwire.ChannelID ) switch msg := nextMsg.(type) { case *lnwire.Pong: // When we receive a Pong message in response to our // last ping message, we'll use the time in which we // sent the ping message to measure a rough estimate of // round trip time. pingSendTime := atomic.LoadInt64(&p.pingLastSend) delay := (time.Now().UnixNano() - pingSendTime) / 1000 atomic.StoreInt64(&p.pingTime, delay) case *lnwire.Ping: pongBytes := make([]byte, msg.NumPongBytes) p.queueMsg(lnwire.NewPong(pongBytes), nil) case *lnwire.SingleFundingRequest: p.server.fundingMgr.processFundingRequest(msg, p.addr) case *lnwire.SingleFundingResponse: p.server.fundingMgr.processFundingResponse(msg, p.addr) case *lnwire.SingleFundingComplete: p.server.fundingMgr.processFundingComplete(msg, p.addr) case *lnwire.SingleFundingSignComplete: p.server.fundingMgr.processFundingSignComplete(msg, p.addr) case *lnwire.FundingLocked: p.server.fundingMgr.processFundingLocked(msg, p.addr) case *lnwire.CloseRequest: p.remoteCloseChanReqs <- msg case *lnwire.Error: p.server.fundingMgr.processFundingError(msg, p.addr) // TODO(roasbeef): create ChanUpdater interface for the below case *lnwire.UpdateAddHTLC: isChanUpdate = true targetChan = msg.ChanID case *lnwire.UpdateFufillHTLC: isChanUpdate = true targetChan = msg.ChanID case *lnwire.UpdateFailHTLC: isChanUpdate = true targetChan = msg.ChanID case *lnwire.RevokeAndAck: isChanUpdate = true targetChan = msg.ChanID case *lnwire.CommitSig: isChanUpdate = true targetChan = msg.ChanID case *lnwire.ChannelUpdate, *lnwire.ChannelAnnouncement, *lnwire.NodeAnnouncement, *lnwire.AnnounceSignatures: p.server.discoverSrv.ProcessRemoteAnnouncement(msg, p.addr.IdentityKey) default: peerLog.Errorf("unknown message received from peer "+ "%v", p) } if isChanUpdate { sendUpdate := func() { // Dispatch the commitment update message to // the proper active goroutine dedicated to // this channel. p.htlcManMtx.RLock() channel, ok := p.htlcManagers[targetChan] p.htlcManMtx.RUnlock() if !ok { peerLog.Errorf("recv'd update for unknown "+ "channel %v from %v", targetChan, p) return } channel <- nextMsg } // Check the map of active channel streams, if this map // has an entry, then this means the channel is fully // open. In this case, we can send the channel update // directly without any further waiting. activeChanMtx.Lock() _, ok := activeChanStreams[targetChan] activeChanMtx.Unlock() if ok { sendUpdate() continue } // Otherwise, we'll launch a goroutine to synchronize // the processing of this message, with the opening of // the channel as marked by the funding manage. go func() { // Block until the channel is marked open. p.server.fundingMgr.waitUntilChannelOpen(targetChan) // Once the channel is open, we'll mark the // stream as active and send the update to the // channel. Marking the stream lets us take the // fast path above, skipping the check to the // funding manager. activeChanMtx.Lock() activeChanStreams[targetChan] = struct{}{} sendUpdate() activeChanMtx.Unlock() }() } } p.Disconnect() p.wg.Done() peerLog.Tracef("readHandler for peer %v done", p) } // logWireMessage logs the receipt or sending of particular wire message. This // function is used rather than just logging the message in order to produce // less spammy log messages in trace mode by setting the 'Curve" parameter to // nil. Doing this avoids printing out each of the field elements in the curve // parameters for secp256k1. func (p *peer) logWireMessage(msg lnwire.Message, read bool) { switch m := msg.(type) { case *lnwire.RevokeAndAck: m.NextRevocationKey.Curve = nil case *lnwire.NodeAnnouncement: m.NodeID.Curve = nil case *lnwire.ChannelAnnouncement: m.NodeID1.Curve = nil m.NodeID2.Curve = nil m.BitcoinKey1.Curve = nil m.BitcoinKey2.Curve = nil case *lnwire.SingleFundingComplete: m.RevocationKey.Curve = nil case *lnwire.SingleFundingRequest: m.CommitmentKey.Curve = nil m.ChannelDerivationPoint.Curve = nil case *lnwire.SingleFundingResponse: m.ChannelDerivationPoint.Curve = nil m.CommitmentKey.Curve = nil m.RevocationKey.Curve = nil case *lnwire.FundingLocked: m.NextPerCommitmentPoint.Curve = nil } prefix := "readMessage from" if !read { prefix = "writeMessage to" } peerLog.Tracef(prefix+" %v: %v", p, newLogClosure(func() string { return spew.Sdump(msg) })) } // writeMessage writes the target lnwire.Message to the remote peer. func (p *peer) writeMessage(msg lnwire.Message) error { // Simply exit if we're shutting down. if atomic.LoadInt32(&p.disconnect) != 0 { return nil } // TODO(roasbeef): add message summaries p.logWireMessage(msg, false) // As the Lightning wire protocol is fully message oriented, we only // allows one wire message per outer encapsulated crypto message. So // we'll create a temporary buffer to write the message directly to. var msgPayload [lnwire.MaxMessagePayload]byte b := bytes.NewBuffer(msgPayload[0:0:len(msgPayload)]) // With the temp buffer created and sliced properly (length zero, full // capacity), we'll now encode the message directly into this buffer. n, err := lnwire.WriteMessage(b, msg, 0) atomic.AddUint64(&p.bytesSent, uint64(n)) // Finally, write the message itself in a single swoop. _, err = p.conn.Write(b.Bytes()) return err } // writeHandler is a goroutine dedicated to reading messages off of an incoming // queue, and writing them out to the wire. This goroutine coordinates with the // queueHandler in order to ensure the incoming message queue is quickly drained. // // NOTE: This method MUST be run as a goroutine. func (p *peer) writeHandler() { defer func() { p.wg.Done() peerLog.Tracef("writeHandler for peer %v done", p) }() for { select { case outMsg := <-p.sendQueue: switch outMsg.msg.(type) { // If we're about to send a ping message, then log the // exact time in which we send the message so we can // use the delay as a rough estimate of latency to the // remote peer. case *lnwire.Ping: // TODO(roasbeef): do this before the write? // possibly account for processing within func? now := time.Now().UnixNano() atomic.StoreInt64(&p.pingLastSend, now) } // Write out the message to the socket, closing the // 'sentChan' if it's non-nil, The 'sentChan' allows // callers to optionally synchronize sends with the // writeHandler. err := p.writeMessage(outMsg.msg) if outMsg.sentChan != nil { close(outMsg.sentChan) } if err != nil { peerLog.Errorf("unable to write message: %v", err) p.Disconnect() return } case <-p.quit: return } } } // queueHandler is responsible for accepting messages from outside subsystems // to be eventually sent out on the wire by the writeHandler. // // NOTE: This method MUST be run as a goroutine. func (p *peer) queueHandler() { defer p.wg.Done() pendingMsgs := list.New() for { // Before add a queue'd message our pending message queue, // we'll first try to aggressively empty out our pending list of // messaging. for { // Examine the front of the queue. If this message is // nil, then we've emptied out the queue and can accept // new messages from outside sub-systems. elem := pendingMsgs.Front() if elem == nil { break } select { case p.sendQueue <- elem.Value.(outgoinMsg): pendingMsgs.Remove(elem) case <-p.quit: return default: break } } // If there weren't any messages to send, or the writehandler // is still blocked, then we'll accept a new message into the // queue from outside sub-systems. select { case <-p.quit: return case msg := <-p.outgoingQueue: pendingMsgs.PushBack(msg) } } } // pingHandler is responsible for periodically sending ping messages to the // remote peer in order to keep the connection alive and/or determine if the // connection is still active. // // NOTE: This method MUST be run as a goroutine. func (p *peer) pingHandler() { pingTicker := time.NewTicker(pingInterval) defer pingTicker.Stop() // TODO(roasbeef): make dynamic in order to create fake cover traffic const numPingBytes = 16 out: for { select { case <-pingTicker.C: p.queueMsg(lnwire.NewPing(numPingBytes), nil) case <-p.quit: break out } } p.wg.Done() } // PingTime returns the estimated ping time to the peer in microseconds. func (p *peer) PingTime() int64 { return atomic.LoadInt64(&p.pingTime) } // queueMsg queues a new lnwire.Message to be eventually sent out on the // wire. func (p *peer) queueMsg(msg lnwire.Message, doneChan chan struct{}) { select { case p.outgoingQueue <- outgoinMsg{msg, doneChan}: case <-p.quit: return } } // ChannelSnapshots returns a slice of channel snapshots detailing all // currently active channels maintained with the remote peer. func (p *peer) ChannelSnapshots() []*channeldb.ChannelSnapshot { resp := make(chan []*channeldb.ChannelSnapshot, 1) p.chanSnapshotReqs <- &chanSnapshotReq{resp} return <-resp } // channelManager is goroutine dedicated to handling all requests/signals // pertaining to the opening, cooperative closing, and force closing of all // channels maintained with the remote peer. // // NOTE: This method MUST be run as a goroutine. func (p *peer) channelManager() { out: for { select { case req := <-p.chanSnapshotReqs: p.activeChanMtx.RLock() snapshots := make([]*channeldb.ChannelSnapshot, 0, len(p.activeChannels)) for _, activeChan := range p.activeChannels { snapshot := activeChan.StateSnapshot() snapshots = append(snapshots, snapshot) } p.activeChanMtx.RUnlock() req.resp <- snapshots case newChanReq := <-p.newChannels: chanPoint := newChanReq.channel.ChannelPoint() chanID := lnwire.NewChanIDFromOutPoint(chanPoint) p.activeChanMtx.Lock() p.activeChannels[chanID] = newChanReq.channel p.activeChanMtx.Unlock() peerLog.Infof("New channel active ChannelPoint(%v) "+ "with peerId(%v)", chanPoint, p.id) // Now that the channel is open, notify the Htlc // Switch of a new active link. // TODO(roasbeef): register needs to account for // in-flight htlc's on restart chanSnapShot := newChanReq.channel.StateSnapshot() downstreamLink := make(chan *htlcPacket, 10) plexChan := p.server.htlcSwitch.RegisterLink(p, chanSnapShot, downstreamLink) // With the channel registered to the HtlcSwitch spawn // a goroutine to handle commitment updates for this // new channel. upstreamLink := make(chan lnwire.Message, 10) p.htlcManMtx.Lock() p.htlcManagers[chanID] = upstreamLink p.htlcManMtx.Unlock() p.wg.Add(1) go p.htlcManager(newChanReq.channel, plexChan, downstreamLink, upstreamLink) close(newChanReq.done) case req := <-p.localCloseChanReqs: p.handleLocalClose(req) case req := <-p.remoteCloseChanReqs: p.handleRemoteClose(req) case <-p.quit: break out } } p.wg.Done() } // executeCooperativeClose executes the initial phase of a user-executed // cooperative channel close. The channel state machine is transitioned to the // closing phase, then our half of the closing witness is sent over to the // remote peer. func (p *peer) executeCooperativeClose(channel *lnwallet.LightningChannel) (*chainhash.Hash, error) { // Shift the channel state machine into a 'closing' state. This // generates a signature for the closing tx, as well as a txid of the // closing tx itself, allowing us to watch the network to determine // when the remote node broadcasts the fully signed closing // transaction. sig, txid, err := channel.InitCooperativeClose() if err != nil { return nil, err } chanPoint := channel.ChannelPoint() peerLog.Infof("Executing cooperative closure of "+ "ChanPoint(%v) with peerID(%v), txid=%v", chanPoint, p.id, txid) // With our signature for the close tx generated, send the signature to // the remote peer instructing it to close this particular channel // point. // TODO(roasbeef): remove encoding redundancy closeSig, err := btcec.ParseSignature(sig, btcec.S256()) if err != nil { return nil, err } chanID := lnwire.NewChanIDFromOutPoint(chanPoint) closeReq := lnwire.NewCloseRequest(chanID, closeSig) p.queueMsg(closeReq, nil) return txid, nil } // handleLocalClose kicks-off the workflow to execute a cooperative or forced // unilateral closure of the channel initiated by a local subsystem. // TODO(roasbeef): if no more active channels with peer call Remove on connMgr // with peerID func (p *peer) handleLocalClose(req *closeLinkReq) { var ( err error closingTxid *chainhash.Hash ) chanID := lnwire.NewChanIDFromOutPoint(req.chanPoint) p.activeChanMtx.RLock() channel := p.activeChannels[chanID] p.activeChanMtx.RUnlock() switch req.CloseType { // A type of CloseRegular indicates that the user has opted to close // out this channel on-chain, so we execute the cooperative channel // closure workflow. case CloseRegular: closingTxid, err = p.executeCooperativeClose(channel) peerLog.Infof("Attempting cooperative close of "+ "ChannelPoint(%v) with txid: %v", req.chanPoint, closingTxid) // A type of CloseBreach indicates that the counterparty has breached // the channel therefore we need to clean up our local state. case CloseBreach: peerLog.Infof("ChannelPoint(%v) has been breached, wiping "+ "channel", req.chanPoint) if err := wipeChannel(p, channel); err != nil { peerLog.Infof("Unable to wipe channel after detected "+ "breach: %v", err) req.err <- err return } return } if err != nil { req.err <- err return } // Once we've completed the cooperative channel closure, we'll wipe the // channel so we reject any incoming forward or payment requests via // this channel. p.server.breachArbiter.settledContracts <- req.chanPoint if err := wipeChannel(p, channel); err != nil { req.err <- err return } // Clear out the current channel state, marking the channel as being // closed within the database. chanInfo := channel.StateSnapshot() closeSummary := &channeldb.ChannelCloseSummary{ ChanPoint: *req.chanPoint, ClosingTXID: *closingTxid, RemotePub: &chanInfo.RemoteIdentity, Capacity: chanInfo.Capacity, SettledBalance: chanInfo.LocalBalance, CloseType: channeldb.CooperativeClose, IsPending: true, } if err := channel.DeleteState(closeSummary); err != nil { req.err <- err return } // Update the caller with a new event detailing the current pending // state of this request. req.updates <- &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ClosePending{ ClosePending: &lnrpc.PendingUpdate{ Txid: closingTxid[:], }, }, } _, bestHeight, err := p.server.bio.GetBestBlock() if err != nil { req.err <- err return } // Finally, launch a goroutine which will request to be notified by the // ChainNotifier once the closure transaction obtains a single // confirmation. notifier := p.server.chainNotifier go waitForChanToClose(uint32(bestHeight), notifier, req.err, req.chanPoint, closingTxid, func() { // First, we'll mark the database as being fully closed // so we'll no longer watch for its ultimate closure // upon startup. err := p.server.chanDB.MarkChanFullyClosed(req.chanPoint) if err != nil { req.err <- err return } // Respond to the local subsystem which requested the // channel closure. req.updates <- &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ChanClose{ ChanClose: &lnrpc.ChannelCloseUpdate{ ClosingTxid: closingTxid[:], Success: true, }, }, } }) } // handleRemoteClose completes a request for cooperative channel closure // initiated by the remote node. func (p *peer) handleRemoteClose(req *lnwire.CloseRequest) { p.activeChanMtx.RLock() channel, ok := p.activeChannels[req.ChanID] p.activeChanMtx.RUnlock() if !ok { peerLog.Errorf("unable to close channel, ChannelID(%v) is "+ "unknown", req.ChanID) return } chanPoint := channel.ChannelPoint() // Now that we have their signature for the closure transaction, we can // assemble the final closure transaction, complete with our signature. sig := req.RequesterCloseSig closeSig := append(sig.Serialize(), byte(txscript.SigHashAll)) closeTx, err := channel.CompleteCooperativeClose(closeSig) if err != nil { peerLog.Errorf("unable to complete cooperative "+ "close for ChannelPoint(%v): %v", chanPoint, err) // TODO(roasbeef): send ErrorGeneric to other side return } peerLog.Infof("Broadcasting cooperative close tx: %v", newLogClosure(func() string { return spew.Sdump(closeTx) })) if err != nil { peerLog.Errorf("unable to get current height: %v", err) return } _, bestHeight, err := p.server.bio.GetBestBlock() if err != nil { peerLog.Errorf("unable to get best height: %v", err) } // Finally, broadcast the closure transaction, to the network. err = p.server.lnwallet.PublishTransaction(closeTx) if err != nil && !strings.Contains(err.Error(), "already have") { peerLog.Errorf("channel close tx from "+ "ChannelPoint(%v) rejected: %v", chanPoint, err) // TODO(roasbeef): send ErrorGeneric to other side // * remove check above to error return } p.server.breachArbiter.settledContracts <- chanPoint // We've just broadcast the transaction which closes the channel, so // we'll wipe the channel from all our local indexes and also signal to // the switch that this channel is now closed. peerLog.Infof("ChannelPoint(%v) is now closed", chanPoint) if err := wipeChannel(p, channel); err != nil { peerLog.Errorf("unable to wipe channel: %v", err) } // Clear out the current channel state, marking the channel as being // closed within the database. closeTxid := closeTx.TxHash() chanInfo := channel.StateSnapshot() closeSummary := &channeldb.ChannelCloseSummary{ ChanPoint: *chanPoint, ClosingTXID: closeTxid, RemotePub: &chanInfo.RemoteIdentity, Capacity: chanInfo.Capacity, SettledBalance: chanInfo.LocalBalance, CloseType: channeldb.CooperativeClose, IsPending: true, } if err := channel.DeleteState(closeSummary); err != nil { peerLog.Errorf("unable to delete channel state: %v", err) return } // Finally, we'll launch a goroutine to watch the network for the // confirmation of the closing transaction, and mark the channel as // such within the database (once it's confirmed"). notifier := p.server.chainNotifier go waitForChanToClose(uint32(bestHeight), notifier, nil, chanPoint, &closeTxid, func() { // Now that the closing transaction has been confirmed, // we'll mark the database as being fully closed so now // that we no longer watch for its ultimate closure // upon startup. err := p.server.chanDB.MarkChanFullyClosed(chanPoint) if err != nil { peerLog.Errorf("unable to mark channel as closed: %v", err) return } }, ) } // waitForChanToClose uses the passed notifier to wait until the channel has // been detected as closed on chain and then concludes by executing the // following actions: the channel point will be sent over the settleChan, and // finally the callback will be executed. If any error is encountered within // the function, then it will be sent over the errChan. func waitForChanToClose(bestHeight uint32, notifier chainntnfs.ChainNotifier, errChan chan error, chanPoint *wire.OutPoint, closingTxID *chainhash.Hash, cb func()) { // TODO(roasbeef): add param for num needed confs confNtfn, err := notifier.RegisterConfirmationsNtfn(closingTxID, 1, bestHeight) if err != nil { if errChan != nil { errChan <- err } return } // In the case that the ChainNotifier is shutting down, all subscriber // notification channels will be closed, generating a nil receive. height, ok := <-confNtfn.Confirmed if !ok { return } // The channel has been closed, remove it from any active indexes, and // the database state. srvrLog.Infof("ChannelPoint(%v) is now closed at "+ "height %v", chanPoint, height.BlockHeight) // Finally, execute the closure call back to mark the confirmation of // the transaction closing the contract. cb() } // wipeChannel removes the passed channel from all indexes associated with the // peer, and deletes the channel from the database. func wipeChannel(p *peer, channel *lnwallet.LightningChannel) error { channel.Stop() chanID := lnwire.NewChanIDFromOutPoint(channel.ChannelPoint()) p.activeChanMtx.Lock() delete(p.activeChannels, chanID) p.activeChanMtx.Unlock() // Instruct the Htlc Switch to close this link as the channel is no // longer active. p.server.htlcSwitch.UnregisterLink(p.addr.IdentityKey, &chanID) // Additionally, close up "down stream" link for the htlcManager which // has been assigned to this channel. This servers the link between the // htlcManager and the switch, signalling that the channel is no longer // active. p.htlcManMtx.RLock() // If the channel can't be found in the map, then this channel has // already been wiped. htlcWireLink, ok := p.htlcManagers[chanID] if !ok { p.htlcManMtx.RUnlock() return nil } close(htlcWireLink) p.htlcManMtx.RUnlock() // Next, we remove the htlcManager from our internal map as the // goroutine should have exited gracefully due to the channel closure // above. p.htlcManMtx.RLock() delete(p.htlcManagers, chanID) p.htlcManMtx.RUnlock() return nil } // pendingPayment represents a pending HTLC which has yet to be settled by the // upstream peer. A pending payment encapsulates the initial HTLC add request // additionally coupling the index of the HTLC within the log, and an error // channel to signal the payment requester once the payment has been fully // fufilled. type pendingPayment struct { htlc *lnwire.UpdateAddHTLC index uint64 preImage chan [32]byte err chan error done chan struct{} } // commitmentState is the volatile+persistent state of an active channel's // commitment update state-machine. This struct is used by htlcManager's to // save meta-state required for proper functioning. type commitmentState struct { // htlcsToSettle is a list of preimages which allow us to settle one or // many of the pending HTLCs we've received from the upstream peer. htlcsToSettle map[uint64]*channeldb.Invoice // htlcsToCancel is a set of HTLCs identified by their log index which // are to be cancelled upon the next state transition. htlcsToCancel map[uint64]lnwire.FailCode // cancelReasons stores the reason why a particular HTLC was cancelled. // The index of the HTLC within the log is mapped to the cancellation // reason. This value is used to thread the proper error through to the // htlcSwitch, or subsystem that initiated the HTLC. cancelReasons map[uint64]lnwire.FailCode // pendingBatch is slice of payments which have been added to the // channel update log, but not yet committed to latest commitment. pendingBatch []*pendingPayment // clearedHTCLs is a map of outgoing HTLCs we've committed to in our // chain which have not yet been settled by the upstream peer. clearedHTCLs map[uint64]*pendingPayment // switchChan is a channel used to send packets to the htlc switch for // forwarding. switchChan chan<- *htlcPacket // sphinx is an instance of the Sphinx onion Router for this node. The // router will be used to process all incoming Sphinx packets embedded // within HTLC add messages. sphinx *sphinx.Router // pendingCircuits tracks the remote log index of the incoming HTLCs, // mapped to the processed Sphinx packet contained within the HTLC. // This map is used as a staging area between when an HTLC is added to // the log, and when it's locked into the commitment state of both // chains. Once locked in, the processed packet is sent to the switch // along with the HTLC to forward the packet to the next hop. pendingCircuits map[uint64]*sphinx.ProcessedPacket // logCommitTimer is a timer which is sent upon if we go an interval // without receiving/sending a commitment update. It's role is to // ensure both chains converge to identical state in a timely manner. // TODO(roasbeef): timer should be >> then RTT logCommitTimer *time.Timer logCommitTick <-chan time.Time channel *lnwallet.LightningChannel chanPoint *wire.OutPoint chanID lnwire.ChannelID } // htlcManager is the primary goroutine which drives a channel's commitment // update state-machine in response to messages received via several channels. // The htlcManager reads messages from the upstream (remote) peer, and also // from several possible downstream channels managed by the htlcSwitch. In the // event that an htlc needs to be forwarded, then send-only htlcPlex chan is // used which sends htlc packets to the switch for forwarding. Additionally, // the htlcManager handles acting upon all timeouts for any active HTLCs, // manages the channel's revocation window, and also the htlc trickle // queue+timer for this active channels. func (p *peer) htlcManager(channel *lnwallet.LightningChannel, htlcPlex chan<- *htlcPacket, downstreamLink <-chan *htlcPacket, upstreamLink <-chan lnwire.Message) { chanStats := channel.StateSnapshot() peerLog.Infof("HTLC manager for ChannelPoint(%v) started, "+ "our_balance=%v, their_balance=%v, chain_height=%v", channel.ChannelPoint(), chanStats.LocalBalance, chanStats.RemoteBalance, chanStats.NumUpdates) // A new session for this active channel has just started, therefore we // need to send our initial revocation window to the remote peer. for i := 0; i < lnwallet.InitialRevocationWindow; i++ { rev, err := channel.ExtendRevocationWindow() if err != nil { peerLog.Errorf("unable to expand revocation window: %v", err) continue } p.queueMsg(rev, nil) } chanPoint := channel.ChannelPoint() state := &commitmentState{ channel: channel, chanPoint: chanPoint, chanID: lnwire.NewChanIDFromOutPoint(chanPoint), clearedHTCLs: make(map[uint64]*pendingPayment), htlcsToSettle: make(map[uint64]*channeldb.Invoice), htlcsToCancel: make(map[uint64]lnwire.FailCode), cancelReasons: make(map[uint64]lnwire.FailCode), pendingCircuits: make(map[uint64]*sphinx.ProcessedPacket), sphinx: p.server.sphinx, logCommitTimer: time.NewTimer(300 * time.Millisecond), switchChan: htlcPlex, } // TODO(roasbeef): check to see if able to settle any currently pending // HTLCs // * also need signals when new invoices are added by the // invoiceRegistry batchTimer := time.NewTicker(50 * time.Millisecond) defer batchTimer.Stop() out: for { select { case <-channel.UnilateralCloseSignal: // TODO(roasbeef): need to send HTLC outputs to nursery peerLog.Warnf("Remote peer has closed ChannelPoint(%v) on-chain", state.chanPoint) if err := wipeChannel(p, channel); err != nil { peerLog.Errorf("unable to wipe channel %v", err) } p.server.breachArbiter.settledContracts <- state.chanPoint break out case <-channel.ForceCloseSignal: // TODO(roasbeef): path never taken now that server // force closes's directly? peerLog.Warnf("ChannelPoint(%v) has been force "+ "closed, disconnecting from peerID(%x)", state.chanPoint, p.id) break out case <-state.logCommitTick: // If we haven't sent or received a new commitment // update in some time, check to see if we have any // pending updates we need to commit due to our // commitment chains being desynchronized. if state.channel.FullySynced() && len(state.htlcsToSettle) == 0 { continue } if err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() break out } case <-batchTimer.C: // If the current batch is empty, then we have no work // here. if len(state.pendingBatch) == 0 { continue } // Otherwise, attempt to extend the remote commitment // chain including all the currently pending entries. // If the send was unsuccessful, then abandon the // update, waiting for the revocation window to open // up. if err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() break out } case pkt := <-downstreamLink: p.handleDownStreamPkt(state, pkt) case msg, ok := <-upstreamLink: // If the upstream message link is closed, this signals // that the channel itself is being closed, therefore // we exit. if !ok { break out } p.handleUpstreamMsg(state, msg) case <-p.quit: break out } } p.wg.Done() peerLog.Tracef("htlcManager for peer %v done", p) } // handleInitMsg handles the incoming init message which contains global and // local features vectors. If feature vectors are incompatible then disconnect. func (p *peer) handleInitMsg(msg *lnwire.Init) error { localSharedFeatures, err := p.server.localFeatures.Compare(msg.LocalFeatures) if err != nil { err := errors.Errorf("can't compare remote and local feature "+ "vectors: %v", err) peerLog.Error(err) return err } p.localSharedFeatures = localSharedFeatures globalSharedFeatures, err := p.server.globalFeatures.Compare(msg.GlobalFeatures) if err != nil { err := errors.Errorf("can't compare remote and global feature "+ "vectors: %v", err) peerLog.Error(err) return err } p.globalSharedFeatures = globalSharedFeatures return nil } // sendInitMsg sends init message to remote peer which contains our currently // supported local and global features. func (p *peer) sendInitMsg() error { msg := lnwire.NewInitMessage( p.server.globalFeatures, p.server.localFeatures, ) return p.writeMessage(msg) } // handleDownStreamPkt processes an HTLC packet sent from the downstream HTLC // Switch. Possible messages sent by the switch include requests to forward new // HTLCs, timeout previously cleared HTLCs, and finally to settle currently // cleared HTLCs with the upstream peer. func (p *peer) handleDownStreamPkt(state *commitmentState, pkt *htlcPacket) { var isSettle bool switch htlc := pkt.msg.(type) { case *lnwire.UpdateAddHTLC: // A new payment has been initiated via the // downstream channel, so we add the new HTLC // to our local log, then update the commitment // chains. htlc.ChanID = state.chanID index, err := state.channel.AddHTLC(htlc) if err != nil { // TODO: possibly perform fallback/retry logic // depending on type of error peerLog.Errorf("Adding HTLC rejected: %v", err) pkt.err <- err close(pkt.done) // The HTLC was unable to be added to the state // machine, as a result, we'll signal the switch to // cancel the pending payment. // TODO(roasbeef): need to update link as well if local // HTLC? state.switchChan <- &htlcPacket{ amt: htlc.Amount, msg: &lnwire.UpdateFailHTLC{ Reason: []byte{byte(0)}, }, srcLink: state.chanID, } return } p.queueMsg(htlc, nil) state.pendingBatch = append(state.pendingBatch, &pendingPayment{ htlc: htlc, index: index, preImage: pkt.preImage, err: pkt.err, done: pkt.done, }) case *lnwire.UpdateFufillHTLC: // An HTLC we forward to the switch has just settled somewhere // upstream. Therefore we settle the HTLC within the our local // state machine. pre := htlc.PaymentPreimage logIndex, err := state.channel.SettleHTLC(pre) if err != nil { // TODO(roasbeef): broadcast on-chain peerLog.Errorf("settle for incoming HTLC rejected: %v", err) p.Disconnect() return } // With the HTLC settled, we'll need to populate the wire // message to target the specific channel and HTLC to be // cancelled. htlc.ChanID = state.chanID htlc.ID = logIndex // Then we send the HTLC settle message to the connected peer // so we can continue the propagation of the settle message. p.queueMsg(htlc, nil) isSettle = true case *lnwire.UpdateFailHTLC: // An HTLC cancellation has been triggered somewhere upstream, // we'll remove then HTLC from our local state machine. logIndex, err := state.channel.FailHTLC(pkt.payHash) if err != nil { peerLog.Errorf("unable to cancel HTLC: %v", err) return } // With the HTLC removed, we'll need to populate the wire // message to target the specific channel and HTLC to be // cancelled. The "Reason" field will have already been set // within the switch. htlc.ChanID = state.chanID htlc.ID = logIndex // Finally, we send the HTLC message to the peer which // initially created the HTLC. p.queueMsg(htlc, nil) isSettle = true } // If this newly added update exceeds the min batch size for adds, or // this is a settle request, then initiate an update. // TODO(roasbeef): enforce max HTLCs in flight limit if len(state.pendingBatch) >= 10 || isSettle { if err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() return } } } // handleUpstreamMsg processes wire messages related to commitment state // updates from the upstream peer. The upstream peer is the peer whom we have a // direct channel with, updating our respective commitment chains. func (p *peer) handleUpstreamMsg(state *commitmentState, msg lnwire.Message) { switch htlcPkt := msg.(type) { // TODO(roasbeef): timeouts // * fail if can't parse sphinx mix-header case *lnwire.UpdateAddHTLC: // Before adding the new HTLC to the state machine, parse the // onion object in order to obtain the routing information. blobReader := bytes.NewReader(htlcPkt.OnionBlob[:]) onionPkt := &sphinx.OnionPacket{} if err := onionPkt.Decode(blobReader); err != nil { peerLog.Errorf("unable to decode onion pkt: %v", err) p.Disconnect() return } // We just received an add request from an upstream peer, so we // add it to our state machine, then add the HTLC to our // "settle" list in the event that we know the preimage index, err := state.channel.ReceiveHTLC(htlcPkt) if err != nil { peerLog.Errorf("Receiving HTLC rejected: %v", err) p.Disconnect() return } // TODO(roasbeef): perform sanity checks on per-hop payload // * time-lock is sane, fee, chain, etc // Attempt to process the Sphinx packet. We include the payment // hash of the HTLC as it's authenticated within the Sphinx // packet itself as associated data in order to thwart attempts // a replay attacks. In the case of a replay, an attacker is // *forced* to use the same payment hash twice, thereby losing // their money entirely. rHash := htlcPkt.PaymentHash[:] sphinxPacket, err := state.sphinx.ProcessOnionPacket(onionPkt, rHash) if err != nil { // If we're unable to parse the Sphinx packet, then // we'll cancel the HTLC after the current commitment // transition. peerLog.Errorf("unable to process onion pkt: %v", err) state.htlcsToCancel[index] = lnwire.SphinxParseError return } switch sphinxPacket.Action { // We're the designated payment destination. Therefore we // attempt to see if we have an invoice locally which'll allow // us to settle this HTLC. case sphinx.ExitNode: rHash := htlcPkt.PaymentHash invoice, err := p.server.invoices.LookupInvoice(rHash) if err != nil { // If we're the exit node, but don't recognize // the payment hash, then we'll fail the HTLC // on the next state transition. peerLog.Errorf("unable to settle HTLC, "+ "payment hash (%x) unrecognized", rHash[:]) state.htlcsToCancel[index] = lnwire.UnknownPaymentHash return } // If we're not currently in debug mode, and the // extended HTLC doesn't meet the value requested, then // we'll fail the HTLC. if !cfg.DebugHTLC && htlcPkt.Amount < invoice.Terms.Value { peerLog.Errorf("rejecting HTLC due to incorrect "+ "amount: expected %v, received %v", invoice.Terms.Value, htlcPkt.Amount) state.htlcsToCancel[index] = lnwire.IncorrectValue } else { // Otherwise, everything is in order and we'll // settle the HTLC after the current state // transition. state.htlcsToSettle[index] = invoice } // There are additional hops left within this route, so we // track the next hop according to the index of this HTLC // within their log. When forwarding locked-in HLTC's to the // switch, we'll attach the routing information so the switch // can finalize the circuit. case sphinx.MoreHops: state.pendingCircuits[index] = sphinxPacket default: peerLog.Errorf("mal formed onion packet") state.htlcsToCancel[index] = lnwire.SphinxParseError } case *lnwire.UpdateFufillHTLC: pre := htlcPkt.PaymentPreimage idx := htlcPkt.ID if err := state.channel.ReceiveHTLCSettle(pre, idx); err != nil { // TODO(roasbeef): broadcast on-chain peerLog.Errorf("settle for outgoing HTLC rejected: %v", err) p.Disconnect() return } // TODO(roasbeef): add preimage to DB in order to swipe // repeated r-values case *lnwire.UpdateFailHTLC: idx := htlcPkt.ID if err := state.channel.ReceiveFailHTLC(idx); err != nil { peerLog.Errorf("unable to recv HTLC cancel: %v", err) p.Disconnect() return } state.cancelReasons[idx] = lnwire.FailCode(htlcPkt.Reason[0]) case *lnwire.CommitSig: // We just received a new update to our local commitment chain, // validate this new commitment, closing the link if invalid. // TODO(roasbeef): redundant re-serialization sig := htlcPkt.CommitSig.Serialize() if err := state.channel.ReceiveNewCommitment(sig); err != nil { peerLog.Errorf("unable to accept new commitment: %v", err) p.Disconnect() return } // As we've just just accepted a new state, we'll now // immediately send the remote peer a revocation for our prior // state. nextRevocation, err := state.channel.RevokeCurrentCommitment() if err != nil { peerLog.Errorf("unable to revoke commitment: %v", err) return } p.queueMsg(nextRevocation, nil) if !state.logCommitTimer.Stop() { select { case <-state.logCommitTimer.C: default: } } state.logCommitTimer.Reset(300 * time.Millisecond) state.logCommitTick = state.logCommitTimer.C // If both commitment chains are fully synced from our PoV, // then we don't need to reply with a signature as both sides // already have a commitment with the latest accepted state. if state.channel.FullySynced() { return } // Otherwise, the remote party initiated the state transition, // so we'll reply with a signature to provide them with their // version of the latest commitment state. if err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() return } case *lnwire.RevokeAndAck: // We've received a revocation from the remote chain, if valid, // this moves the remote chain forward, and expands our // revocation window. htlcsToForward, err := state.channel.ReceiveRevocation(htlcPkt) if err != nil { peerLog.Errorf("unable to accept revocation: %v", err) p.Disconnect() return } // If any of the HTLCs eligible for forwarding are pending // settling or timing out previous outgoing payments, then we // can them from the pending set, and signal the requester (if // existing) that the payment has been fully fulfilled. var bandwidthUpdate btcutil.Amount settledPayments := make(map[lnwallet.PaymentHash]struct{}) cancelledHtlcs := make(map[uint64]struct{}) for _, htlc := range htlcsToForward { parentIndex := htlc.ParentIndex if p, ok := state.clearedHTCLs[parentIndex]; ok { switch htlc.EntryType { // If the HTLC was settled successfully, then // we return a nil error as well as the payment // preimage back to the possible caller. case lnwallet.Settle: p.preImage <- htlc.RPreimage p.err <- nil // Otherwise, the HTLC failed, so we propagate // the error back to the potential caller. case lnwallet.Fail: errMsg := state.cancelReasons[parentIndex] p.preImage <- [32]byte{} p.err <- errors.New(errMsg.String()) } close(p.done) delete(state.clearedHTCLs, htlc.ParentIndex) } // TODO(roasbeef): rework log entries to a shared // interface. if htlc.EntryType != lnwallet.Add { continue } // If we can settle this HTLC within our local state // update log, then send the update entry to the remote // party. invoice, ok := state.htlcsToSettle[htlc.Index] if ok { preimage := invoice.Terms.PaymentPreimage logIndex, err := state.channel.SettleHTLC(preimage) if err != nil { peerLog.Errorf("unable to settle htlc: %v", err) p.Disconnect() continue } settleMsg := &lnwire.UpdateFufillHTLC{ ChanID: state.chanID, ID: logIndex, PaymentPreimage: preimage, } p.queueMsg(settleMsg, nil) delete(state.htlcsToSettle, htlc.Index) settledPayments[htlc.RHash] = struct{}{} bandwidthUpdate += htlc.Amount continue } // Alternatively, if we marked this HTLC for // cancellation, then immediately cancel the HTLC as // it's now locked in within both commitment // transactions. reason, ok := state.htlcsToCancel[htlc.Index] if !ok { continue } logIndex, err := state.channel.FailHTLC(htlc.RHash) if err != nil { peerLog.Errorf("unable to cancel htlc: %v", err) p.Disconnect() continue } cancelMsg := &lnwire.UpdateFailHTLC{ ChanID: state.chanID, ID: logIndex, Reason: []byte{byte(reason)}, } p.queueMsg(cancelMsg, nil) delete(state.htlcsToCancel, htlc.Index) cancelledHtlcs[htlc.Index] = struct{}{} } go func() { for _, htlc := range htlcsToForward { // We don't need to forward any HTLCs that we // just settled or cancelled above. // TODO(roasbeef): key by index instead? if _, ok := settledPayments[htlc.RHash]; ok { continue } if _, ok := cancelledHtlcs[htlc.Index]; ok { continue } onionPkt := state.pendingCircuits[htlc.Index] delete(state.pendingCircuits, htlc.Index) reason := state.cancelReasons[htlc.ParentIndex] delete(state.cancelReasons, htlc.ParentIndex) // Send this fully activated HTLC to the htlc // switch to continue the chained clear/settle. pkt, err := logEntryToHtlcPkt(state.chanID, htlc, onionPkt, reason) if err != nil { peerLog.Errorf("unable to make htlc pkt: %v", err) continue } state.switchChan <- pkt } }() if len(settledPayments) == 0 && len(cancelledHtlcs) == 0 { return } // Send an update to the htlc switch of our newly available // payment bandwidth. // TODO(roasbeef): ideally should wait for next state update. if bandwidthUpdate != 0 { p.server.htlcSwitch.UpdateLink(state.chanID, bandwidthUpdate) } // With all the settle updates added to the local and remote // HTLC logs, initiate a state transition by updating the // remote commitment chain. if err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() return } // Notify the invoiceRegistry of the invoices we just settled // with this latest commitment update. // TODO(roasbeef): wait until next transition? for invoice := range settledPayments { err := p.server.invoices.SettleInvoice(chainhash.Hash(invoice)) if err != nil { peerLog.Errorf("unable to settle invoice: %v", err) } } } } // updateCommitTx signs, then sends an update to the remote peer adding a new // commitment to their commitment chain which includes all the latest updates // we've received+processed up to this point. func (p *peer) updateCommitTx(state *commitmentState) error { sigTheirs, err := state.channel.SignNextCommitment() if err == lnwallet.ErrNoWindow { peerLog.Tracef("ChannelPoint(%v): revocation window exhausted, unable to send %v", state.chanPoint, len(state.pendingBatch)) return nil } else if err != nil { return err } parsedSig, err := btcec.ParseSignature(sigTheirs, btcec.S256()) if err != nil { return fmt.Errorf("unable to parse sig: %v", err) } commitSig := &lnwire.CommitSig{ ChanID: state.chanID, CommitSig: parsedSig, } p.queueMsg(commitSig, nil) // As we've just cleared out a batch, move all pending updates to the // map of cleared HTLCs, clearing out the set of pending updates. for _, update := range state.pendingBatch { state.clearedHTCLs[update.index] = update } // We've just initiated a state transition, attempt to stop the // logCommitTimer. If the timer already ticked, then we'll consume the // value, dropping if state.logCommitTimer != nil && !state.logCommitTimer.Stop() { select { case <-state.logCommitTimer.C: default: } } state.logCommitTick = nil // Finally, clear our the current batch, and flip the pendingUpdate // bool to indicate were waiting for a commitment signature. // TODO(roasbeef): re-slice instead to avoid GC? state.pendingBatch = nil return nil } // logEntryToHtlcPkt converts a particular Lightning Commitment Protocol (LCP) // log entry the corresponding htlcPacket with src/dest set along with the // proper wire message. This helper method is provided in order to aid an // htlcManager in forwarding packets to the htlcSwitch. func logEntryToHtlcPkt(chanID lnwire.ChannelID, pd *lnwallet.PaymentDescriptor, onionPkt *sphinx.ProcessedPacket, reason lnwire.FailCode) (*htlcPacket, error) { pkt := &htlcPacket{} // TODO(roasbeef): alter after switch to log entry interface var msg lnwire.Message switch pd.EntryType { case lnwallet.Add: // TODO(roasbeef): timeout, onion blob, etc var b bytes.Buffer if err := onionPkt.Packet.Encode(&b); err != nil { return nil, err } htlc := &lnwire.UpdateAddHTLC{ Amount: pd.Amount, PaymentHash: pd.RHash, } copy(htlc.OnionBlob[:], b.Bytes()) msg = htlc case lnwallet.Settle: msg = &lnwire.UpdateFufillHTLC{ PaymentPreimage: pd.RPreimage, } case lnwallet.Fail: // For cancellation messages, we'll also need to set the rHash // within the htlcPacket so the switch knows on which outbound // link to forward the cancellation message msg = &lnwire.UpdateFailHTLC{ Reason: []byte{byte(reason)}, } pkt.payHash = pd.RHash } pkt.amt = pd.Amount pkt.msg = msg pkt.srcLink = chanID pkt.onion = onionPkt return pkt, nil } // TODO(roasbeef): make all start/stop mutexes a CAS