package lnwire import ( "bufio" "crypto/sha256" "encoding/binary" "fmt" "io" "bytes" "github.com/davecgh/go-spew/spew" "github.com/go-errors/errors" ) // FailureMessage represents the onion failure object identified by its unique // failure code. type FailureMessage interface { // Code returns a failure code describing the exact nature of the // error. Code() FailCode // Error returns a human readable string describing the error. With // this method, the FailureMessage interface meets the built-in error // interface. Error() string } // failureMessageLength is the size of the failure message plus the size of // padding. The FailureMessage message should always be EXACTLY this size. const failureMessageLength = 256 const ( // FlagBadOnion error flag describes an unparsable, encrypted by // previous node. FlagBadOnion FailCode = 0x8000 // FlagPerm error flag indicates a permanent failure. FlagPerm FailCode = 0x4000 // FlagNode error flag indicates anode failure. FlagNode FailCode = 0x2000 // FlagUpdate error flag indicates a new channel update is enclosed // within the error. FlagUpdate FailCode = 0x1000 ) // FailCode specifies the precise reason that an upstream HTLC was cancelled. // Each UpdateFailHTLC message carries a FailCode which is to be passed // backwards, encrypted at each step back to the source of the HTLC within the // route. type FailCode uint16 // The currently defined onion failure types within this current version of the // Lightning protocol. const ( CodeNone FailCode = 0 CodeInvalidRealm = FlagBadOnion | 1 CodeTemporaryNodeFailure = FlagNode | 2 CodePermanentNodeFailure = FlagPerm | FlagNode | 2 CodeRequiredNodeFeatureMissing = FlagPerm | FlagNode | 3 CodeInvalidOnionVersion = FlagBadOnion | FlagPerm | 4 CodeInvalidOnionHmac = FlagBadOnion | FlagPerm | 5 CodeInvalidOnionKey = FlagBadOnion | FlagPerm | 6 CodeTemporaryChannelFailure = FlagUpdate | 7 CodePermanentChannelFailure = FlagPerm | 8 CodeRequiredChannelFeatureMissing = FlagPerm | 9 CodeUnknownNextPeer = FlagPerm | 10 CodeAmountBelowMinimum = FlagUpdate | 11 CodeFeeInsufficient = FlagUpdate | 12 CodeIncorrectCltvExpiry = FlagUpdate | 13 CodeExpiryTooSoon = FlagUpdate | 14 CodeChannelDisabled = FlagUpdate | 20 CodeUnknownPaymentHash = FlagPerm | 15 CodeIncorrectPaymentAmount = FlagPerm | 16 CodeFinalExpiryTooSoon FailCode = 17 CodeFinalIncorrectCltvExpiry FailCode = 18 CodeFinalIncorrectHtlcAmount FailCode = 19 CodeExpiryTooFar FailCode = 21 ) // String returns the string representation of the failure code. func (c FailCode) String() string { switch c { case CodeInvalidRealm: return "InvalidRealm" case CodeTemporaryNodeFailure: return "TemporaryNodeFailure" case CodePermanentNodeFailure: return "PermanentNodeFailure" case CodeRequiredNodeFeatureMissing: return "RequiredNodeFeatureMissing" case CodeInvalidOnionVersion: return "InvalidOnionVersion" case CodeInvalidOnionHmac: return "InvalidOnionHmac" case CodeInvalidOnionKey: return "InvalidOnionKey" case CodeTemporaryChannelFailure: return "TemporaryChannelFailure" case CodePermanentChannelFailure: return "PermanentChannelFailure" case CodeRequiredChannelFeatureMissing: return "RequiredChannelFeatureMissing" case CodeUnknownNextPeer: return "UnknownNextPeer" case CodeAmountBelowMinimum: return "AmountBelowMinimum" case CodeFeeInsufficient: return "FeeInsufficient" case CodeIncorrectCltvExpiry: return "IncorrectCltvExpiry" case CodeIncorrectPaymentAmount: return "IncorrectPaymentAmount" case CodeExpiryTooSoon: return "ExpiryTooSoon" case CodeChannelDisabled: return "ChannelDisabled" case CodeUnknownPaymentHash: return "UnknownPaymentHash" case CodeFinalExpiryTooSoon: return "FinalExpiryTooSoon" case CodeFinalIncorrectCltvExpiry: return "FinalIncorrectCltvExpiry" case CodeFinalIncorrectHtlcAmount: return "FinalIncorrectHtlcAmount" case CodeExpiryTooFar: return "ExpiryTooFar" default: return "" } } // FailInvalidRealm is returned if the realm byte is unknown. // // NOTE: May be returned by any node in the payment route. type FailInvalidRealm struct{} // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailInvalidRealm) Error() string { return f.Code().String() } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailInvalidRealm) Code() FailCode { return CodeInvalidRealm } // FailTemporaryNodeFailure is returned if an otherwise unspecified transient // error occurs for the entire node. // // NOTE: May be returned by any node in the payment route. type FailTemporaryNodeFailure struct{} // Code returns the failure unique code. // NOTE: Part of the FailureMessage interface. func (f FailTemporaryNodeFailure) Code() FailCode { return CodeTemporaryNodeFailure } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailTemporaryNodeFailure) Error() string { return f.Code().String() } // FailPermanentNodeFailure is returned if an otherwise unspecified permanent // error occurs for the entire node. // // NOTE: May be returned by any node in the payment route. type FailPermanentNodeFailure struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailPermanentNodeFailure) Code() FailCode { return CodePermanentNodeFailure } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailPermanentNodeFailure) Error() string { return f.Code().String() } // FailRequiredNodeFeatureMissing is returned if a node has requirement // advertised in its node_announcement features which were not present in the // onion. // // NOTE: May be returned by any node in the payment route. type FailRequiredNodeFeatureMissing struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailRequiredNodeFeatureMissing) Code() FailCode { return CodeRequiredNodeFeatureMissing } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailRequiredNodeFeatureMissing) Error() string { return f.Code().String() } // FailPermanentChannelFailure is return if an otherwise unspecified permanent // error occurs for the outgoing channel (eg. channel (recently). // // NOTE: May be returned by any node in the payment route. type FailPermanentChannelFailure struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailPermanentChannelFailure) Code() FailCode { return CodePermanentChannelFailure } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailPermanentChannelFailure) Error() string { return f.Code().String() } // FailRequiredChannelFeatureMissing is returned if the outgoing channel has a // requirement advertised in its channel announcement features which were not // present in the onion. // // NOTE: May only be returned by intermediate nodes. type FailRequiredChannelFeatureMissing struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailRequiredChannelFeatureMissing) Code() FailCode { return CodeRequiredChannelFeatureMissing } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailRequiredChannelFeatureMissing) Error() string { return f.Code().String() } // FailUnknownNextPeer is returned if the next peer specified by the onion is // not known. // // NOTE: May only be returned by intermediate nodes. type FailUnknownNextPeer struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailUnknownNextPeer) Code() FailCode { return CodeUnknownNextPeer } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailUnknownNextPeer) Error() string { return f.Code().String() } // FailIncorrectPaymentAmount is returned if the amount paid is less than the // amount expected, the final node MUST fail the HTLC. If the amount paid is // more than twice the amount expected, the final node SHOULD fail the HTLC. // This allows the sender to reduce information leakage by altering the amount, // without allowing accidental gross overpayment. // // NOTE: May only be returned by the final node in the path. type FailIncorrectPaymentAmount struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailIncorrectPaymentAmount) Code() FailCode { return CodeIncorrectPaymentAmount } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailIncorrectPaymentAmount) Error() string { return f.Code().String() } // FailUnknownPaymentHash is returned for two reasons: // // 1) if the payment hash has already been paid, the final node MAY treat the // payment hash as unknown, or may succeed in accepting the HTLC. If the // payment hash is unknown, the final node MUST fail the HTLC. // // 2) if the amount paid is less than the amount expected, the final node MUST // fail the HTLC. If the amount paid is more than twice the amount expected, // the final node SHOULD fail the HTLC. This allows the sender to reduce // information leakage by altering the amount, without allowing accidental // gross overpayment. // // NOTE: May only be returned by the final node in the path. type FailUnknownPaymentHash struct { // amount is the value of the extended HTLC. amount MilliSatoshi } // NewFailUnknownPaymentHash makes a new instance of the FailUnknownPaymentHash // error bound to the specified HTLC amount. func NewFailUnknownPaymentHash(amt MilliSatoshi) *FailUnknownPaymentHash { return &FailUnknownPaymentHash{ amount: amt, } } // Amount is the value of the extended HTLC. func (f FailUnknownPaymentHash) Amount() MilliSatoshi { return f.amount } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailUnknownPaymentHash) Code() FailCode { return CodeUnknownPaymentHash } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailUnknownPaymentHash) Error() string { return fmt.Sprintf("UnknownPaymentHash(amt=%v)", f.amount) } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailUnknownPaymentHash) Decode(r io.Reader, pver uint32) error { err := ReadElement(r, &f.amount) switch { // This is an optional tack on that was added later in the protocol. As // a result, older nodes may not include this value. We'll account for // this by checking for io.EOF here which means that no bytes were read // at all. case err == io.EOF: return nil case err != nil: return err } return nil } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailUnknownPaymentHash) Encode(w io.Writer, pver uint32) error { return WriteElement(w, f.amount) } // FailFinalExpiryTooSoon is returned if the cltv_expiry is too low, the final // node MUST fail the HTLC. // // NOTE: May only be returned by the final node in the path. type FailFinalExpiryTooSoon struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailFinalExpiryTooSoon) Code() FailCode { return CodeFinalExpiryTooSoon } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailFinalExpiryTooSoon) Error() string { return f.Code().String() } // NewFinalExpiryTooSoon creates new instance of the FailFinalExpiryTooSoon. func NewFinalExpiryTooSoon() *FailFinalExpiryTooSoon { return &FailFinalExpiryTooSoon{} } // FailInvalidOnionVersion is returned if the onion version byte is unknown. // // NOTE: May be returned only by intermediate nodes. type FailInvalidOnionVersion struct { // OnionSHA256 hash of the onion blob which haven't been proceeded. OnionSHA256 [sha256.Size]byte } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailInvalidOnionVersion) Error() string { return fmt.Sprintf("InvalidOnionVersion(onion_sha=%x)", f.OnionSHA256[:]) } // NewInvalidOnionVersion creates new instance of the FailInvalidOnionVersion. func NewInvalidOnionVersion(onion []byte) *FailInvalidOnionVersion { return &FailInvalidOnionVersion{OnionSHA256: sha256.Sum256(onion)} } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailInvalidOnionVersion) Code() FailCode { return CodeInvalidOnionVersion } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailInvalidOnionVersion) Decode(r io.Reader, pver uint32) error { return ReadElement(r, f.OnionSHA256[:]) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailInvalidOnionVersion) Encode(w io.Writer, pver uint32) error { return WriteElement(w, f.OnionSHA256[:]) } // FailInvalidOnionHmac is return if the onion HMAC is incorrect. // // NOTE: May only be returned by intermediate nodes. type FailInvalidOnionHmac struct { // OnionSHA256 hash of the onion blob which haven't been proceeded. OnionSHA256 [sha256.Size]byte } // NewInvalidOnionHmac creates new instance of the FailInvalidOnionHmac. func NewInvalidOnionHmac(onion []byte) *FailInvalidOnionHmac { return &FailInvalidOnionHmac{OnionSHA256: sha256.Sum256(onion)} } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailInvalidOnionHmac) Code() FailCode { return CodeInvalidOnionHmac } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailInvalidOnionHmac) Decode(r io.Reader, pver uint32) error { return ReadElement(r, f.OnionSHA256[:]) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailInvalidOnionHmac) Encode(w io.Writer, pver uint32) error { return WriteElement(w, f.OnionSHA256[:]) } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailInvalidOnionHmac) Error() string { return fmt.Sprintf("InvalidOnionHMAC(onion_sha=%x)", f.OnionSHA256[:]) } // FailInvalidOnionKey is return if the ephemeral key in the onion is // unparsable. // // NOTE: May only be returned by intermediate nodes. type FailInvalidOnionKey struct { // OnionSHA256 hash of the onion blob which haven't been proceeded. OnionSHA256 [sha256.Size]byte } // NewInvalidOnionKey creates new instance of the FailInvalidOnionKey. func NewInvalidOnionKey(onion []byte) *FailInvalidOnionKey { return &FailInvalidOnionKey{OnionSHA256: sha256.Sum256(onion)} } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailInvalidOnionKey) Code() FailCode { return CodeInvalidOnionKey } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailInvalidOnionKey) Decode(r io.Reader, pver uint32) error { return ReadElement(r, f.OnionSHA256[:]) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailInvalidOnionKey) Encode(w io.Writer, pver uint32) error { return WriteElement(w, f.OnionSHA256[:]) } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailInvalidOnionKey) Error() string { return fmt.Sprintf("InvalidOnionKey(onion_sha=%x)", f.OnionSHA256[:]) } // parseChannelUpdateCompatabilityMode will attempt to parse a channel updated // encoded into an onion error payload in two ways. First, we'll try the // compatibility oriented version wherein we'll _skip_ the length prefixing on // the channel update message. Older versions of c-lighting do this so we'll // attempt to parse these messages in order to retain compatibility. If we're // unable to pull out a fully valid version, then we'll fall back to the // regular parsing mechanism which includes the length prefix an NO type byte. func parseChannelUpdateCompatabilityMode(r *bufio.Reader, chanUpdate *ChannelUpdate, pver uint32) error { // We'll peek out two bytes from the buffer without advancing the // buffer so we can decide how to parse the remainder of it. maybeTypeBytes, err := r.Peek(2) if err != nil { return err } // Some nodes well prefix an additional set of bytes in front of their // channel updates. These bytes will _almost_ always be 258 or the type // of the ChannelUpdate message. typeInt := binary.BigEndian.Uint16(maybeTypeBytes) if typeInt == MsgChannelUpdate { // At this point it's likely the case that this is a channel // update message with its type prefixed, so we'll snip off the // first two bytes and parse it as normal. var throwAwayTypeBytes [2]byte _, err := r.Read(throwAwayTypeBytes[:]) if err != nil { return err } } // At this pint, we've either decided to keep the entire thing, or snip // off the first two bytes. In either case, we can just read it as // normal. return chanUpdate.Decode(r, pver) } // FailTemporaryChannelFailure is if an otherwise unspecified transient error // occurs for the outgoing channel (eg. channel capacity reached, too many // in-flight htlcs) // // NOTE: May only be returned by intermediate nodes. type FailTemporaryChannelFailure struct { // Update is used to update information about state of the channel // which caused the failure. // // NOTE: This field is optional. Update *ChannelUpdate } // NewTemporaryChannelFailure creates new instance of the FailTemporaryChannelFailure. func NewTemporaryChannelFailure(update *ChannelUpdate) *FailTemporaryChannelFailure { return &FailTemporaryChannelFailure{Update: update} } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailTemporaryChannelFailure) Code() FailCode { return CodeTemporaryChannelFailure } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailTemporaryChannelFailure) Error() string { if f.Update == nil { return f.Code().String() } return fmt.Sprintf("TemporaryChannelFailure(update=%v)", spew.Sdump(f.Update)) } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailTemporaryChannelFailure) Decode(r io.Reader, pver uint32) error { var length uint16 err := ReadElement(r, &length) if err != nil { return err } if length != 0 { f.Update = &ChannelUpdate{} return parseChannelUpdateCompatabilityMode( bufio.NewReader(r), f.Update, pver, ) } return nil } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailTemporaryChannelFailure) Encode(w io.Writer, pver uint32) error { var payload []byte if f.Update != nil { var bw bytes.Buffer if err := f.Update.Encode(&bw, pver); err != nil { return err } payload = bw.Bytes() } if err := WriteElement(w, uint16(len(payload))); err != nil { return err } _, err := w.Write(payload) return err } // FailAmountBelowMinimum is returned if the HTLC does not reach the current // minimum amount, we tell them the amount of the incoming HTLC and the current // channel setting for the outgoing channel. // // NOTE: May only be returned by the intermediate nodes in the path. type FailAmountBelowMinimum struct { // HtlcMsat is the wrong amount of the incoming HTLC. HtlcMsat MilliSatoshi // Update is used to update information about state of the channel // which caused the failure. Update ChannelUpdate } // NewAmountBelowMinimum creates new instance of the FailAmountBelowMinimum. func NewAmountBelowMinimum(htlcMsat MilliSatoshi, update ChannelUpdate) *FailAmountBelowMinimum { return &FailAmountBelowMinimum{ HtlcMsat: htlcMsat, Update: update, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailAmountBelowMinimum) Code() FailCode { return CodeAmountBelowMinimum } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailAmountBelowMinimum) Error() string { return fmt.Sprintf("AmountBelowMinimum(amt=%v, update=%v", f.HtlcMsat, spew.Sdump(f.Update)) } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailAmountBelowMinimum) Decode(r io.Reader, pver uint32) error { if err := ReadElement(r, &f.HtlcMsat); err != nil { return err } var length uint16 if err := ReadElement(r, &length); err != nil { return err } f.Update = ChannelUpdate{} return parseChannelUpdateCompatabilityMode( bufio.NewReader(r), &f.Update, pver, ) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailAmountBelowMinimum) Encode(w io.Writer, pver uint32) error { if err := WriteElement(w, f.HtlcMsat); err != nil { return err } return writeOnionErrorChanUpdate(w, &f.Update, pver) } // FailFeeInsufficient is returned if the HTLC does not pay sufficient fee, we // tell them the amount of the incoming HTLC and the current channel setting // for the outgoing channel. // // NOTE: May only be returned by intermediate nodes. type FailFeeInsufficient struct { // HtlcMsat is the wrong amount of the incoming HTLC. HtlcMsat MilliSatoshi // Update is used to update information about state of the channel // which caused the failure. Update ChannelUpdate } // NewFeeInsufficient creates new instance of the FailFeeInsufficient. func NewFeeInsufficient(htlcMsat MilliSatoshi, update ChannelUpdate) *FailFeeInsufficient { return &FailFeeInsufficient{ HtlcMsat: htlcMsat, Update: update, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailFeeInsufficient) Code() FailCode { return CodeFeeInsufficient } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailFeeInsufficient) Error() string { return fmt.Sprintf("FeeInsufficient(htlc_amt==%v, update=%v", f.HtlcMsat, spew.Sdump(f.Update)) } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailFeeInsufficient) Decode(r io.Reader, pver uint32) error { if err := ReadElement(r, &f.HtlcMsat); err != nil { return err } var length uint16 if err := ReadElement(r, &length); err != nil { return err } f.Update = ChannelUpdate{} return parseChannelUpdateCompatabilityMode( bufio.NewReader(r), &f.Update, pver, ) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailFeeInsufficient) Encode(w io.Writer, pver uint32) error { if err := WriteElement(w, f.HtlcMsat); err != nil { return err } return writeOnionErrorChanUpdate(w, &f.Update, pver) } // FailIncorrectCltvExpiry is returned if outgoing cltv value does not match // the update add htlc's cltv expiry minus cltv expiry delta for the outgoing // channel, we tell them the cltv expiry and the current channel setting for // the outgoing channel. // // NOTE: May only be returned by intermediate nodes. type FailIncorrectCltvExpiry struct { // CltvExpiry is the wrong absolute timeout in blocks, after which // outgoing HTLC expires. CltvExpiry uint32 // Update is used to update information about state of the channel // which caused the failure. Update ChannelUpdate } // NewIncorrectCltvExpiry creates new instance of the FailIncorrectCltvExpiry. func NewIncorrectCltvExpiry(cltvExpiry uint32, update ChannelUpdate) *FailIncorrectCltvExpiry { return &FailIncorrectCltvExpiry{ CltvExpiry: cltvExpiry, Update: update, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailIncorrectCltvExpiry) Code() FailCode { return CodeIncorrectCltvExpiry } func (f *FailIncorrectCltvExpiry) Error() string { return fmt.Sprintf("IncorrectCltvExpiry(expiry=%v, update=%v", f.CltvExpiry, spew.Sdump(f.Update)) } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailIncorrectCltvExpiry) Decode(r io.Reader, pver uint32) error { if err := ReadElement(r, &f.CltvExpiry); err != nil { return err } var length uint16 if err := ReadElement(r, &length); err != nil { return err } f.Update = ChannelUpdate{} return parseChannelUpdateCompatabilityMode( bufio.NewReader(r), &f.Update, pver, ) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailIncorrectCltvExpiry) Encode(w io.Writer, pver uint32) error { if err := WriteElement(w, f.CltvExpiry); err != nil { return err } return writeOnionErrorChanUpdate(w, &f.Update, pver) } // FailExpiryTooSoon is returned if the ctlv-expiry is too near, we tell them // the current channel setting for the outgoing channel. // // NOTE: May only be returned by intermediate nodes. type FailExpiryTooSoon struct { // Update is used to update information about state of the channel // which caused the failure. Update ChannelUpdate } // NewExpiryTooSoon creates new instance of the FailExpiryTooSoon. func NewExpiryTooSoon(update ChannelUpdate) *FailExpiryTooSoon { return &FailExpiryTooSoon{ Update: update, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailExpiryTooSoon) Code() FailCode { return CodeExpiryTooSoon } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f *FailExpiryTooSoon) Error() string { return fmt.Sprintf("ExpiryTooSoon(update=%v", spew.Sdump(f.Update)) } // Decode decodes the failure from l stream. // // NOTE: Part of the Serializable interface. func (f *FailExpiryTooSoon) Decode(r io.Reader, pver uint32) error { var length uint16 if err := ReadElement(r, &length); err != nil { return err } f.Update = ChannelUpdate{} return parseChannelUpdateCompatabilityMode( bufio.NewReader(r), &f.Update, pver, ) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailExpiryTooSoon) Encode(w io.Writer, pver uint32) error { return writeOnionErrorChanUpdate(w, &f.Update, pver) } // FailChannelDisabled is returned if the channel is disabled, we tell them the // current channel setting for the outgoing channel. // // NOTE: May only be returned by intermediate nodes. type FailChannelDisabled struct { // Flags least-significant bit must be set to 0 if the creating node // corresponds to the first node in the previously sent channel // announcement and 1 otherwise. Flags uint16 // Update is used to update information about state of the channel // which caused the failure. Update ChannelUpdate } // NewChannelDisabled creates new instance of the FailChannelDisabled. func NewChannelDisabled(flags uint16, update ChannelUpdate) *FailChannelDisabled { return &FailChannelDisabled{ Flags: flags, Update: update, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailChannelDisabled) Code() FailCode { return CodeChannelDisabled } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailChannelDisabled) Error() string { return fmt.Sprintf("ChannelDisabled(flags=%v, update=%v", f.Flags, spew.Sdump(f.Update)) } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailChannelDisabled) Decode(r io.Reader, pver uint32) error { if err := ReadElement(r, &f.Flags); err != nil { return err } var length uint16 if err := ReadElement(r, &length); err != nil { return err } f.Update = ChannelUpdate{} return parseChannelUpdateCompatabilityMode( bufio.NewReader(r), &f.Update, pver, ) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailChannelDisabled) Encode(w io.Writer, pver uint32) error { if err := WriteElement(w, f.Flags); err != nil { return err } return writeOnionErrorChanUpdate(w, &f.Update, pver) } // FailFinalIncorrectCltvExpiry is returned if the outgoing_cltv_value does not // match the ctlv_expiry of the HTLC at the final hop. // // NOTE: might be returned by final node only. type FailFinalIncorrectCltvExpiry struct { // CltvExpiry is the wrong absolute timeout in blocks, after which // outgoing HTLC expires. CltvExpiry uint32 } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailFinalIncorrectCltvExpiry) Error() string { return fmt.Sprintf("FinalIncorrectCltvExpiry(expiry=%v)", f.CltvExpiry) } // NewFinalIncorrectCltvExpiry creates new instance of the // FailFinalIncorrectCltvExpiry. func NewFinalIncorrectCltvExpiry(cltvExpiry uint32) *FailFinalIncorrectCltvExpiry { return &FailFinalIncorrectCltvExpiry{ CltvExpiry: cltvExpiry, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailFinalIncorrectCltvExpiry) Code() FailCode { return CodeFinalIncorrectCltvExpiry } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailFinalIncorrectCltvExpiry) Decode(r io.Reader, pver uint32) error { return ReadElement(r, &f.CltvExpiry) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailFinalIncorrectCltvExpiry) Encode(w io.Writer, pver uint32) error { return WriteElement(w, f.CltvExpiry) } // FailFinalIncorrectHtlcAmount is returned if the amt_to_forward is higher // than incoming_htlc_amt of the HTLC at the final hop. // // NOTE: May only be returned by the final node. type FailFinalIncorrectHtlcAmount struct { // IncomingHTLCAmount is the wrong forwarded htlc amount. IncomingHTLCAmount MilliSatoshi } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailFinalIncorrectHtlcAmount) Error() string { return fmt.Sprintf("FinalIncorrectHtlcAmount(amt=%v)", f.IncomingHTLCAmount) } // NewFinalIncorrectHtlcAmount creates new instance of the // FailFinalIncorrectHtlcAmount. func NewFinalIncorrectHtlcAmount(amount MilliSatoshi) *FailFinalIncorrectHtlcAmount { return &FailFinalIncorrectHtlcAmount{ IncomingHTLCAmount: amount, } } // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f *FailFinalIncorrectHtlcAmount) Code() FailCode { return CodeFinalIncorrectHtlcAmount } // Decode decodes the failure from bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailFinalIncorrectHtlcAmount) Decode(r io.Reader, pver uint32) error { return ReadElement(r, &f.IncomingHTLCAmount) } // Encode writes the failure in bytes stream. // // NOTE: Part of the Serializable interface. func (f *FailFinalIncorrectHtlcAmount) Encode(w io.Writer, pver uint32) error { return WriteElement(w, f.IncomingHTLCAmount) } // FailExpiryTooFar is returned if the CLTV expiry in the HTLC is too far in the // future. // // NOTE: May be returned by any node in the payment route. type FailExpiryTooFar struct{} // Code returns the failure unique code. // // NOTE: Part of the FailureMessage interface. func (f FailExpiryTooFar) Code() FailCode { return CodeExpiryTooFar } // Returns a human readable string describing the target FailureMessage. // // NOTE: Implements the error interface. func (f FailExpiryTooFar) Error() string { return f.Code().String() } // DecodeFailure decodes, validates, and parses the lnwire onion failure, for // the provided protocol version. func DecodeFailure(r io.Reader, pver uint32) (FailureMessage, error) { // First, we'll parse out the encapsulated failure message itself. This // is a 2 byte length followed by the payload itself. var failureLength uint16 if err := ReadElement(r, &failureLength); err != nil { return nil, fmt.Errorf("unable to read error len: %v", err) } if failureLength > failureMessageLength { return nil, fmt.Errorf("failure message is too "+ "long: %v", failureLength) } failureData := make([]byte, failureLength) if _, err := io.ReadFull(r, failureData); err != nil { return nil, fmt.Errorf("unable to full read payload of "+ "%v: %v", failureLength, err) } dataReader := bytes.NewReader(failureData) // Once we have the failure data, we can obtain the failure code from // the first two bytes of the buffer. var codeBytes [2]byte if _, err := io.ReadFull(dataReader, codeBytes[:]); err != nil { return nil, fmt.Errorf("unable to read failure code: %v", err) } failCode := FailCode(binary.BigEndian.Uint16(codeBytes[:])) // Create the empty failure by given code and populate the failure with // additional data if needed. failure, err := makeEmptyOnionError(failCode) if err != nil { return nil, fmt.Errorf("unable to make empty error: %v", err) } // Finally, if this failure has a payload, then we'll read that now as // well. switch f := failure.(type) { case Serializable: if err := f.Decode(dataReader, pver); err != nil { return nil, fmt.Errorf("unable to decode error "+ "update (type=%T, len_bytes=%v, bytes=%x): %v", failure, failureLength, failureData[:], err) } } return failure, nil } // EncodeFailure encodes, including the necessary onion failure header // information. func EncodeFailure(w io.Writer, failure FailureMessage, pver uint32) error { var failureMessageBuffer bytes.Buffer // First, we'll write out the error code itself into the failure // buffer. var codeBytes [2]byte code := uint16(failure.Code()) binary.BigEndian.PutUint16(codeBytes[:], code) _, err := failureMessageBuffer.Write(codeBytes[:]) if err != nil { return err } // Next, some message have an additional message payload, if this is // one of those types, then we'll also encode the error payload as // well. switch failure := failure.(type) { case Serializable: if err := failure.Encode(&failureMessageBuffer, pver); err != nil { return err } } // The combined size of this message must be below the max allowed // failure message length. failureMessage := failureMessageBuffer.Bytes() if len(failureMessage) > failureMessageLength { return fmt.Errorf("failure message exceed max "+ "available size: %v", len(failureMessage)) } // Finally, we'll add some padding in order to ensure that all failure // messages are fixed size. pad := make([]byte, failureMessageLength-len(failureMessage)) return WriteElements(w, uint16(len(failureMessage)), failureMessage, uint16(len(pad)), pad, ) } // makeEmptyOnionError creates a new empty onion error of the proper concrete // type based on the passed failure code. func makeEmptyOnionError(code FailCode) (FailureMessage, error) { switch code { case CodeInvalidRealm: return &FailInvalidRealm{}, nil case CodeTemporaryNodeFailure: return &FailTemporaryNodeFailure{}, nil case CodePermanentNodeFailure: return &FailPermanentNodeFailure{}, nil case CodeRequiredNodeFeatureMissing: return &FailRequiredNodeFeatureMissing{}, nil case CodePermanentChannelFailure: return &FailPermanentChannelFailure{}, nil case CodeRequiredChannelFeatureMissing: return &FailRequiredChannelFeatureMissing{}, nil case CodeUnknownNextPeer: return &FailUnknownNextPeer{}, nil case CodeUnknownPaymentHash: return &FailUnknownPaymentHash{}, nil case CodeIncorrectPaymentAmount: return &FailIncorrectPaymentAmount{}, nil case CodeFinalExpiryTooSoon: return &FailFinalExpiryTooSoon{}, nil case CodeInvalidOnionVersion: return &FailInvalidOnionVersion{}, nil case CodeInvalidOnionHmac: return &FailInvalidOnionHmac{}, nil case CodeInvalidOnionKey: return &FailInvalidOnionKey{}, nil case CodeTemporaryChannelFailure: return &FailTemporaryChannelFailure{}, nil case CodeAmountBelowMinimum: return &FailAmountBelowMinimum{}, nil case CodeFeeInsufficient: return &FailFeeInsufficient{}, nil case CodeIncorrectCltvExpiry: return &FailIncorrectCltvExpiry{}, nil case CodeExpiryTooSoon: return &FailExpiryTooSoon{}, nil case CodeChannelDisabled: return &FailChannelDisabled{}, nil case CodeFinalIncorrectCltvExpiry: return &FailFinalIncorrectCltvExpiry{}, nil case CodeFinalIncorrectHtlcAmount: return &FailFinalIncorrectHtlcAmount{}, nil case CodeExpiryTooFar: return &FailExpiryTooFar{}, nil default: return nil, errors.Errorf("unknown error code: %v", code) } } // writeOnionErrorChanUpdate writes out a ChannelUpdate using the onion error // format. The format is that we first write out the true serialized length of // the channel update, followed by the serialized channel update itself. func writeOnionErrorChanUpdate(w io.Writer, chanUpdate *ChannelUpdate, pver uint32) error { // First, we encode the channel update in a temporary buffer in order // to get the exact serialized size. var b bytes.Buffer if err := chanUpdate.Encode(&b, pver); err != nil { return err } // Now that we know the size, we can write the length out in the main // writer. updateLen := b.Len() if err := WriteElement(w, uint16(updateLen)); err != nil { return err } // With the length written, we'll then write out the serialized channel // update. if _, err := w.Write(b.Bytes()); err != nil { return err } return nil }