package main import ( "bytes" "container/list" "crypto/rand" "encoding/binary" "fmt" "net" "sync" "sync/atomic" "time" "github.com/btcsuite/fastsha256" "github.com/davecgh/go-spew/spew" "github.com/go-errors/errors" "github.com/lightningnetwork/lightning-onion" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lnrpc" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/roasbeef/btcd/btcec" "github.com/roasbeef/btcd/chaincfg/chainhash" "github.com/roasbeef/btcd/connmgr" "github.com/roasbeef/btcd/txscript" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcutil" ) var ( numNodes int32 ) const ( // pingInterval is the interval at which ping messages are sent. pingInterval = 1 * time.Minute // outgoingQueueLen is the buffer size of the channel which houses // messages to be sent across the wire, requested by objects outside // this struct. outgoingQueueLen = 50 ) // outgoinMsg packages an lnwire.Message to be sent out on the wire, along with // a buffered channel which will be sent upon once the write is complete. This // buffered channel acts as a semaphore to be used for synchronization purposes. type outgoinMsg struct { msg lnwire.Message sentChan chan struct{} // MUST be buffered. } // chanSnapshotReq is a message sent by outside subsystems to a peer in order // to gain a snapshot of the peer's currently active channels. type chanSnapshotReq struct { resp chan []*channeldb.ChannelSnapshot } // peer is an active peer on the Lightning Network. This struct is responsible // for managing any channel state related to this peer. To do so, it has // several helper goroutines to handle events such as HTLC timeouts, new // funding workflow, and detecting an uncooperative closure of any active // channels. // TODO(roasbeef): proper reconnection logic type peer struct { // The following fields are only meant to be used *atomically* bytesReceived uint64 bytesSent uint64 // pingTime is a rough estimate of the RTT (round-trip-time) between us // and the connected peer. This time is expressed in micro seconds. // TODO(roasbeef): also use a WMA or EMA? pingTime int64 // pingLastSend is the Unix time expressed in nanoseconds when we sent // our last ping message. pingLastSend int64 // MUST be used atomically. started int32 disconnect int32 connReq *connmgr.ConnReq conn net.Conn addr *lnwire.NetAddress lightningID chainhash.Hash inbound bool id int32 // For purposes of detecting retransmits, etc. lastNMessages map[lnwire.Message]struct{} // This mutex protects all the stats below it. sync.RWMutex timeConnected time.Time lastSend time.Time lastRecv time.Time // sendQueue is the channel which is used to queue outgoing to be // written onto the wire. Note that this channel is unbuffered. sendQueue chan outgoinMsg // outgoingQueue is a buffered channel which allows second/third party // objects to queue messages to be sent out on the wire. outgoingQueue chan outgoinMsg // sendQueueSync is used as a semaphore to synchronize writes between // the writeHandler and the queueHandler. sendQueueSync chan struct{} // activeChannels is a map which stores the state machines of all // active channels. Channels are indexed into the map by the txid of // the funding transaction which opened the channel. activeChanMtx sync.RWMutex activeChannels map[wire.OutPoint]*lnwallet.LightningChannel chanSnapshotReqs chan *chanSnapshotReq htlcManMtx sync.RWMutex htlcManagers map[wire.OutPoint]chan lnwire.Message // newChanBarriers is a map from a channel point to a 'barrier' which // will be signalled once the channel is fully open. This barrier acts // as a synchronization point for any incoming/outgoing HTLCs before // the channel has been fully opened. barrierMtx sync.RWMutex newChanBarriers map[wire.OutPoint]chan struct{} barrierInits chan wire.OutPoint // newChannels is used by the fundingManager to send fully opened // channels to the source peer which handled the funding workflow. newChannels chan *lnwallet.LightningChannel // localCloseChanReqs is a channel in which any local requests to close // a particular channel are sent over. localCloseChanReqs chan *closeLinkReq // remoteCloseChanReqs is a channel in which any remote requests // (initiated by the remote peer) close a particular channel are sent // over. remoteCloseChanReqs chan *lnwire.CloseRequest // nextPendingChannelID is an integer which represents the id of the // next pending channel. Pending channels are tracked by this id // throughout their lifetime until they become active channels, or are // cancelled. Channels id's initiated by an outbound node start from 0, // while channels initiated by an inbound node start from 2^63. In // either case, this value is always monotonically increasing. nextPendingChannelID uint64 pendingChannelMtx sync.RWMutex server *server // localSharedFeatures is a product of comparison of our and their // local features vectors which consist of features which are present // on both sides. localSharedFeatures *lnwire.SharedFeatures // globalSharedFeatures is a product of comparison of our and their // global features vectors which consist of features which are present // on both sides. globalSharedFeatures *lnwire.SharedFeatures queueQuit chan struct{} quit chan struct{} wg sync.WaitGroup } // newPeer creates a new peer from an establish connection object, and a // pointer to the main server. func newPeer(conn net.Conn, connReq *connmgr.ConnReq, server *server, addr *lnwire.NetAddress, inbound bool) (*peer, error) { nodePub := addr.IdentityKey p := &peer{ conn: conn, lightningID: chainhash.Hash(fastsha256.Sum256(nodePub.SerializeCompressed())), addr: addr, id: atomic.AddInt32(&numNodes, 1), inbound: inbound, connReq: connReq, server: server, lastNMessages: make(map[lnwire.Message]struct{}), sendQueueSync: make(chan struct{}, 1), sendQueue: make(chan outgoinMsg, 1), outgoingQueue: make(chan outgoinMsg, outgoingQueueLen), barrierInits: make(chan wire.OutPoint), newChanBarriers: make(map[wire.OutPoint]chan struct{}), activeChannels: make(map[wire.OutPoint]*lnwallet.LightningChannel), htlcManagers: make(map[wire.OutPoint]chan lnwire.Message), chanSnapshotReqs: make(chan *chanSnapshotReq), newChannels: make(chan *lnwallet.LightningChannel, 1), localCloseChanReqs: make(chan *closeLinkReq), remoteCloseChanReqs: make(chan *lnwire.CloseRequest), localSharedFeatures: nil, globalSharedFeatures: nil, queueQuit: make(chan struct{}), quit: make(chan struct{}), } // Initiate the pending channel identifier properly depending on if this // node is inbound or outbound. This value will be used in an increasing // manner to track pending channels. if p.inbound { p.nextPendingChannelID = 1 << 63 } else { p.nextPendingChannelID = 0 } // Fetch and then load all the active channels we have with this // remote peer from the database. activeChans, err := server.chanDB.FetchOpenChannels(p.addr.IdentityKey) if err != nil { peerLog.Errorf("unable to fetch active chans "+ "for peer %v: %v", p, err) return nil, err } peerLog.Debugf("Loaded %v active channels from database with peerID(%v)", len(activeChans), p.id) if err := p.loadActiveChannels(activeChans); err != nil { return nil, err } return p, nil } // loadActiveChannels creates indexes within the peer for tracking all active // channels returned by the database. func (p *peer) loadActiveChannels(chans []*channeldb.OpenChannel) error { for _, dbChan := range chans { chanID := dbChan.ChanID lnChan, err := lnwallet.NewLightningChannel(p.server.lnwallet.Signer, p.server.chainNotifier, dbChan) if err != nil { return err } chanPoint := wire.OutPoint{ Hash: chanID.Hash, Index: chanID.Index, } p.activeChanMtx.Lock() p.activeChannels[chanPoint] = lnChan p.activeChanMtx.Unlock() peerLog.Infof("peerID(%v) loaded ChannelPoint(%v)", p.id, chanPoint) p.server.breachArbiter.newContracts <- lnChan // Register this new channel link with the HTLC Switch. This is // necessary to properly route multi-hop payments, and forward // new payments triggered by RPC clients. downstreamLink := make(chan *htlcPacket, 10) plexChan := p.server.htlcSwitch.RegisterLink(p, dbChan.Snapshot(), downstreamLink) upstreamLink := make(chan lnwire.Message, 10) p.htlcManMtx.Lock() p.htlcManagers[chanPoint] = upstreamLink p.htlcManMtx.Unlock() p.wg.Add(1) go p.htlcManager(lnChan, plexChan, downstreamLink, upstreamLink) } return nil } // Start starts all helper goroutines the peer needs for normal operations. // In the case this peer has already been started, then this function is a // loop. func (p *peer) Start() error { if atomic.AddInt32(&p.started, 1) != 1 { return nil } peerLog.Tracef("peer %v starting", p) p.wg.Add(2) go p.queueHandler() go p.writeHandler() // Exchange local and global features, the init message should be // very first between two nodes. if err := p.sendInitMsg(); err != nil { return err } // Should wait for peers to compare their feature vectors // and only then start message exchanges. msg, _, err := p.readNextMessage() if err != nil { return err } if msg, ok := msg.(*lnwire.Init); ok { if err := p.handleInitMsg(msg); err != nil { return err } } else { return errors.New("very first message between nodes " + "must be init message") } p.wg.Add(3) go p.readHandler() go p.channelManager() go p.pingHandler() return nil } // Stop signals the peer for a graceful shutdown. All active goroutines will be // signaled to wrap up any final actions. This function will also block until // all goroutines have exited. func (p *peer) Stop() error { // If we're already disconnecting, just exit. if !atomic.CompareAndSwapInt32(&p.disconnect, 0, 1) { return nil } // Ensure that the TCP connection is properly closed before continuing. p.conn.Close() // Signal all worker goroutines to gracefully exit. close(p.quit) p.wg.Wait() return nil } // TODO(roasbeef): add WaitForShutdown method // Disconnect terminates the connection with the remote peer. Additionally, a // signal is sent to the server and htlcSwitch indicating the resources // allocated to the peer can now be cleaned up. func (p *peer) Disconnect() { if !atomic.CompareAndSwapInt32(&p.disconnect, 0, 1) { return } peerLog.Tracef("Disconnecting %s", p) // Ensure that the TCP connection is properly closed before continuing. p.conn.Close() close(p.quit) // If this connection was established persistently, then notify the // connection manager that the peer has been disconnected. if p.connReq != nil { p.server.connMgr.Disconnect(p.connReq.ID()) } // Launch a goroutine to clean up the remaining resources. go func() { // Tell the switch to unregister all links associated with this // peer. Passing nil as the target link indicates that all // links associated with this interface should be closed. p.server.htlcSwitch.UnregisterLink(p.addr.IdentityKey, nil) p.server.donePeers <- p }() } // String returns the string representation of this peer. func (p *peer) String() string { return p.conn.RemoteAddr().String() } // readNextMessage reads, and returns the next message on the wire along with // any additional raw payload. func (p *peer) readNextMessage() (lnwire.Message, []byte, error) { // TODO(roasbeef): use our own net magic? n, nextMsg, rawPayload, err := lnwire.ReadMessage(p.conn, 0, p.addr.ChainNet) atomic.AddUint64(&p.bytesReceived, uint64(n)) if err != nil { return nil, nil, err } // TODO(roasbeef): add message summaries p.logWireMessage(nextMsg, true) return nextMsg, rawPayload, nil } // readHandler is responsible for reading messages off the wire in series, then // properly dispatching the handling of the message to the proper subsystem. // // NOTE: This method MUST be run as a goroutine. func (p *peer) readHandler() { out: for atomic.LoadInt32(&p.disconnect) == 0 { nextMsg, _, err := p.readNextMessage() if err != nil { peerLog.Infof("unable to read message from %v: %v", p, err) switch err.(type) { // If this is just a message we don't yet recognize, // we'll continue processing as normal as this allows // us to introduce new messages in a forwards // compatible manner. case *lnwire.UnknownMessage: continue // If the error we encountered wasn't just a message we // didn't recognize, then we'll stop all processing s // this is a fatal error. default: break out } } var ( isChanUpdate bool targetChan wire.OutPoint ) switch msg := nextMsg.(type) { case *lnwire.Pong: // When we receive a Pong message in response to our // last ping message, we'll use the time in which we // sent the ping message to measure a rough estimate of // round trip time. pingSendTime := atomic.LoadInt64(&p.pingLastSend) delay := (time.Now().UnixNano() - pingSendTime) / 1000 atomic.StoreInt64(&p.pingTime, delay) case *lnwire.Ping: p.queueMsg(lnwire.NewPong(msg.Nonce), nil) case *lnwire.SingleFundingRequest: p.server.fundingMgr.processFundingRequest(msg, p.addr) case *lnwire.SingleFundingResponse: p.server.fundingMgr.processFundingResponse(msg, p.addr) case *lnwire.SingleFundingComplete: p.server.fundingMgr.processFundingComplete(msg, p.addr) case *lnwire.SingleFundingSignComplete: p.server.fundingMgr.processFundingSignComplete(msg, p.addr) case *lnwire.SingleFundingOpenProof: p.server.fundingMgr.processFundingOpenProof(msg, p.addr) case *lnwire.CloseRequest: p.remoteCloseChanReqs <- msg case *lnwire.ErrorGeneric: p.server.fundingMgr.processErrorGeneric(msg, p.addr) // TODO(roasbeef): create ChanUpdater interface for the below case *lnwire.UpdateAddHTLC: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.UpdateFufillHTLC: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.UpdateFailHTLC: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.RevokeAndAck: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.CommitSig: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.NodeAnnouncement, *lnwire.ChannelAnnouncement, *lnwire.ChannelUpdateAnnouncement: p.server.chanRouter.ProcessRoutingMessage(msg, p.addr.IdentityKey) } if isChanUpdate { // We might be receiving an update to a newly funded // channel in which we were the responder. Therefore // we need to possibly block until the new channel has // propagated internally through the system. // TODO(roasbeef): replace with atomic load from/into // map? p.barrierMtx.RLock() barrier, ok := p.newChanBarriers[targetChan] p.barrierMtx.RUnlock() if ok { peerLog.Tracef("waiting for chan barrier "+ "signal for ChannelPoint(%v)", targetChan) select { case <-barrier: case <-p.quit: // TODO(roasbeef): add timer? break out } peerLog.Tracef("barrier for ChannelPoint(%v) "+ "closed", targetChan) } // Dispatch the commitment update message to the proper // active goroutine dedicated to this channel. p.htlcManMtx.Lock() channel, ok := p.htlcManagers[targetChan] p.htlcManMtx.Unlock() if !ok { peerLog.Errorf("recv'd update for unknown "+ "channel %v from %v", targetChan, p) continue } channel <- nextMsg } } p.Disconnect() p.wg.Done() peerLog.Tracef("readHandler for peer %v done", p) } // logWireMessage logs the receipt or sending of particular wire message. This // function is used rather than just logging the message in order to produce // less spammy log messages in trace mode by setting the 'Curve" parameter to // nil. Doing this avoids printing out each of the field elements in the curve // parameters for secp256k1. func (p *peer) logWireMessage(msg lnwire.Message, read bool) { switch m := msg.(type) { case *lnwire.RevokeAndAck: m.NextRevocationKey.Curve = nil case *lnwire.NodeAnnouncement: m.NodeID.Curve = nil case *lnwire.ChannelAnnouncement: m.FirstNodeID.Curve = nil m.SecondNodeID.Curve = nil m.FirstBitcoinKey.Curve = nil m.SecondBitcoinKey.Curve = nil case *lnwire.SingleFundingComplete: m.RevocationKey.Curve = nil case *lnwire.SingleFundingRequest: m.CommitmentKey.Curve = nil m.ChannelDerivationPoint.Curve = nil case *lnwire.SingleFundingResponse: m.ChannelDerivationPoint.Curve = nil m.CommitmentKey.Curve = nil m.RevocationKey.Curve = nil } prefix := "readMessage from" if !read { prefix = "writeMessage to" } peerLog.Tracef(prefix+" %v: %v", p, newLogClosure(func() string { return spew.Sdump(msg) })) } // writeMessage writes the target lnwire.Message to the remote peer. func (p *peer) writeMessage(msg lnwire.Message) error { // Simply exit if we're shutting down. if atomic.LoadInt32(&p.disconnect) != 0 { return nil } // TODO(roasbeef): add message summaries p.logWireMessage(msg, false) n, err := lnwire.WriteMessage(p.conn, msg, 0, p.addr.ChainNet) atomic.AddUint64(&p.bytesSent, uint64(n)) return err } // writeHandler is a goroutine dedicated to reading messages off of an incoming // queue, and writing them out to the wire. This goroutine coordinates with the // queueHandler in order to ensure the incoming message queue is quickly drained. // // NOTE: This method MUST be run as a goroutine. func (p *peer) writeHandler() { defer func() { p.wg.Done() peerLog.Tracef("writeHandler for peer %v done", p) }() for { select { case outMsg := <-p.sendQueue: switch outMsg.msg.(type) { // If we're about to send a ping message, then log the // exact time in which we send the message so we can // use the delay as a rough estimate of latency to the // remote peer. case *lnwire.Ping: // TODO(roasbeef): do this before the write? // possibly account for processing within func? now := time.Now().UnixNano() atomic.StoreInt64(&p.pingLastSend, now) } // Write out the message to the socket, closing the // 'sentChan' if it's non-nil, The 'sentChan' allows // callers to optionally synchronize sends with the // writeHandler. err := p.writeMessage(outMsg.msg) if outMsg.sentChan != nil { close(outMsg.sentChan) } if err != nil { peerLog.Errorf("unable to write message: %v", err) p.Disconnect() return } case <-p.quit: return } } } // queueHandler is responsible for accepting messages from outside subsystems // to be eventually sent out on the wire by the writeHandler. // // NOTE: This method MUST be run as a goroutine. func (p *peer) queueHandler() { defer p.wg.Done() pendingMsgs := list.New() for { // Before add a queue'd message our pending message queue, // we'll first try to aggressively empty out our pending list of // messaging. for { // Examine the front of the queue. If this message is // nil, then we've emptied out the queue and can accept // new messages from outside sub-systems. elem := pendingMsgs.Front() if elem == nil { break } select { case p.sendQueue <- elem.Value.(outgoinMsg): pendingMsgs.Remove(elem) case <-p.quit: return default: break } } // If there weren't any messages to send, or the writehandler // is still blocked, then we'll accept a new message into the // queue from outside sub-systems. select { case <-p.quit: return case msg := <-p.outgoingQueue: pendingMsgs.PushBack(msg) } } } // pingHandler is responsible for periodically sending ping messages to the // remote peer in order to keep the connection alive and/or determine if the // connection is still active. // // NOTE: This method MUST be run as a goroutine. func (p *peer) pingHandler() { pingTicker := time.NewTicker(pingInterval) defer pingTicker.Stop() var pingBuf [8]byte out: for { select { case <-pingTicker.C: // Fill the ping buffer with fresh randomness. If we're // unable to read enough bytes, then we simply defer // sending the ping to the next interval. if _, err := rand.Read(pingBuf[:]); err != nil { peerLog.Errorf("unable to send ping to %v: %v", p, err) continue } // Convert the bytes read into a uint64, and queue the // message for sending. nonce := binary.BigEndian.Uint64(pingBuf[:]) p.queueMsg(lnwire.NewPing(nonce), nil) case <-p.quit: break out } } p.wg.Done() } // PingTime returns the estimated ping time to the peer in microseconds. func (p *peer) PingTime() int64 { return atomic.LoadInt64(&p.pingTime) } // queueMsg queues a new lnwire.Message to be eventually sent out on the // wire. func (p *peer) queueMsg(msg lnwire.Message, doneChan chan struct{}) { select { case p.outgoingQueue <- outgoinMsg{msg, doneChan}: case <-p.quit: return } } // ChannelSnapshots returns a slice of channel snapshots detailing all // currently active channels maintained with the remote peer. func (p *peer) ChannelSnapshots() []*channeldb.ChannelSnapshot { resp := make(chan []*channeldb.ChannelSnapshot, 1) p.chanSnapshotReqs <- &chanSnapshotReq{resp} return <-resp } // channelManager is goroutine dedicated to handling all requests/signals // pertaining to the opening, cooperative closing, and force closing of all // channels maintained with the remote peer. // // NOTE: This method MUST be run as a goroutine. func (p *peer) channelManager() { out: for { select { case req := <-p.chanSnapshotReqs: p.activeChanMtx.RLock() snapshots := make([]*channeldb.ChannelSnapshot, 0, len(p.activeChannels)) for _, activeChan := range p.activeChannels { snapshot := activeChan.StateSnapshot() snapshots = append(snapshots, snapshot) } p.activeChanMtx.RUnlock() req.resp <- snapshots case pendingChanPoint := <-p.barrierInits: // A new channel has almost finished the funding // process. In order to properly synchronize with the // writeHandler goroutine, we add a new channel to the // barriers map which will be closed once the channel // is fully open. p.barrierMtx.Lock() peerLog.Tracef("Creating chan barrier for "+ "ChannelPoint(%v)", pendingChanPoint) p.newChanBarriers[pendingChanPoint] = make(chan struct{}) p.barrierMtx.Unlock() case newChan := <-p.newChannels: chanPoint := *newChan.ChannelPoint() p.activeChanMtx.Lock() p.activeChannels[chanPoint] = newChan p.activeChanMtx.Unlock() peerLog.Infof("New channel active ChannelPoint(%v) "+ "with peerId(%v)", chanPoint, p.id) // Now that the channel is open, notify the Htlc // Switch of a new active link. chanSnapShot := newChan.StateSnapshot() downstreamLink := make(chan *htlcPacket, 10) plexChan := p.server.htlcSwitch.RegisterLink(p, chanSnapShot, downstreamLink) // With the channel registered to the HtlcSwitch spawn // a goroutine to handle commitment updates for this // new channel. upstreamLink := make(chan lnwire.Message, 10) p.htlcManMtx.Lock() p.htlcManagers[chanPoint] = upstreamLink p.htlcManMtx.Unlock() p.wg.Add(1) go p.htlcManager(newChan, plexChan, downstreamLink, upstreamLink) // Close the active channel barrier signalling the // readHandler that commitment related modifications to // this channel can now proceed. p.barrierMtx.Lock() peerLog.Tracef("Closing chan barrier for ChannelPoint(%v)", chanPoint) close(p.newChanBarriers[chanPoint]) delete(p.newChanBarriers, chanPoint) p.barrierMtx.Unlock() case req := <-p.localCloseChanReqs: p.handleLocalClose(req) case req := <-p.remoteCloseChanReqs: p.handleRemoteClose(req) case <-p.quit: break out } } p.wg.Done() } // executeCooperativeClose executes the initial phase of a user-executed // cooperative channel close. The channel state machine is transitioned to the // closing phase, then our half of the closing witness is sent over to the // remote peer. func (p *peer) executeCooperativeClose(channel *lnwallet.LightningChannel) (*chainhash.Hash, error) { // Shift the channel state machine into a 'closing' state. This // generates a signature for the closing tx, as well as a txid of the // closing tx itself, allowing us to watch the network to determine // when the remote node broadcasts the fully signed closing // transaction. sig, txid, err := channel.InitCooperativeClose() if err != nil { return nil, err } chanPoint := channel.ChannelPoint() peerLog.Infof("Executing cooperative closure of "+ "ChanPoint(%v) with peerID(%v), txid=%v", chanPoint, p.id, txid) // With our signature for the close tx generated, send the signature to // the remote peer instructing it to close this particular channel // point. // TODO(roasbeef): remove encoding redundancy closeSig, err := btcec.ParseSignature(sig, btcec.S256()) if err != nil { return nil, err } closeReq := lnwire.NewCloseRequest(*chanPoint, closeSig) p.queueMsg(closeReq, nil) return txid, nil } // handleLocalClose kicks-off the workflow to execute a cooperative or forced // unilateral closure of the channel initiated by a local subsystem. // TODO(roasbeef): if no more active channels with peer call Remove on connMgr // with peerID func (p *peer) handleLocalClose(req *closeLinkReq) { var ( err error closingTxid *chainhash.Hash ) p.activeChanMtx.RLock() channel := p.activeChannels[*req.chanPoint] p.activeChanMtx.RUnlock() switch req.CloseType { // A type of CloseRegular indicates that the user has opted to close // out this channel on-chian, so we execute the cooperative channel // closure workflow. case CloseRegular: closingTxid, err = p.executeCooperativeClose(channel) peerLog.Infof("Attempting cooperative close of "+ "ChannelPoint(%v) with txid: %v", req.chanPoint, closingTxid) // A type of CloseBreach indicates that the counterparty has breached // the channel therefore we need to clean up our local state. case CloseBreach: peerLog.Infof("ChannelPoint(%v) has been breached, wiping "+ "channel", req.chanPoint) if err := wipeChannel(p, channel); err != nil { peerLog.Infof("Unable to wipe channel after detected "+ "breach: %v", err) req.err <- err return } return } if err != nil { req.err <- err return } // Update the caller with a new event detailing the current pending // state of this request. req.updates <- &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ClosePending{ ClosePending: &lnrpc.PendingUpdate{ Txid: closingTxid[:], }, }, } // Finally, launch a goroutine which will request to be notified by the // ChainNotifier once the closure transaction obtains a single // confirmation. go func() { // TODO(roasbeef): add param for num needed confs notifier := p.server.chainNotifier confNtfn, err := notifier.RegisterConfirmationsNtfn(closingTxid, 1) if err != nil { req.err <- err return } select { case height, ok := <-confNtfn.Confirmed: // In the case that the ChainNotifier is shutting down, // all subscriber notification channels will be closed, // generating a nil receive. if !ok { return } // The channel has been closed, remove it from any // active indexes, and the database state. peerLog.Infof("ChannelPoint(%v) is now closed at "+ "height %v", req.chanPoint, height.BlockHeight) if err := wipeChannel(p, channel); err != nil { req.err <- err return } case <-p.quit: return } // Respond to the local subsystem which requested the channel // closure. req.updates <- &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ChanClose{ ChanClose: &lnrpc.ChannelCloseUpdate{ ClosingTxid: closingTxid[:], Success: true, }, }, } p.server.breachArbiter.settledContracts <- req.chanPoint }() } // handleRemoteClose completes a request for cooperative channel closure // initiated by the remote node. func (p *peer) handleRemoteClose(req *lnwire.CloseRequest) { chanPoint := req.ChannelPoint key := wire.OutPoint{ Hash: chanPoint.Hash, Index: chanPoint.Index, } p.activeChanMtx.RLock() channel, ok := p.activeChannels[key] p.activeChanMtx.RUnlock() if !ok { peerLog.Errorf("unable to close channel, ChannelPoint(%v) is "+ "unknown", key) return } // Now that we have their signature for the closure transaction, we // can assemble the final closure transaction, complete with our // signature. sig := req.RequesterCloseSig closeSig := append(sig.Serialize(), byte(txscript.SigHashAll)) closeTx, err := channel.CompleteCooperativeClose(closeSig) if err != nil { peerLog.Errorf("unable to complete cooperative "+ "close for ChannelPoint(%v): %v", chanPoint, err) // TODO(roasbeef): send ErrorGeneric to other side return } peerLog.Infof("Broadcasting cooperative close tx: %v", newLogClosure(func() string { return spew.Sdump(closeTx) })) // Finally, broadcast the closure transaction, to the network. if err := p.server.lnwallet.PublishTransaction(closeTx); err != nil { peerLog.Errorf("channel close tx from "+ "ChannelPoint(%v) rejected: %v", chanPoint, err) // TODO(roasbeef): send ErrorGeneric to other side return } // TODO(roasbeef): also wait for confs before removing state peerLog.Infof("ChannelPoint(%v) is now "+ "closed", key) if err := wipeChannel(p, channel); err != nil { peerLog.Errorf("unable to wipe channel: %v", err) } p.server.breachArbiter.settledContracts <- &req.ChannelPoint } // wipeChannel removes the passed channel from all indexes associated with the // peer, and deletes the channel from the database. func wipeChannel(p *peer, channel *lnwallet.LightningChannel) error { chanID := channel.ChannelPoint() p.activeChanMtx.Lock() delete(p.activeChannels, *chanID) p.activeChanMtx.Unlock() // Instruct the Htlc Switch to close this link as the channel is no // longer active. p.server.htlcSwitch.UnregisterLink(p.addr.IdentityKey, chanID) // Additionally, close up "down stream" link for the htlcManager which // has been assigned to this channel. This servers the link between the // htlcManager and the switch, signalling that the channel is no longer // active. p.htlcManMtx.RLock() // If the channel can't be found in the map, then this channel has // already been wiped. htlcWireLink, ok := p.htlcManagers[*chanID] if !ok { p.htlcManMtx.RUnlock() return nil } close(htlcWireLink) p.htlcManMtx.RUnlock() // Next, we remove the htlcManager from our internal map as the // goroutine should have exited gracefully due to the channel closure // above. p.htlcManMtx.RLock() delete(p.htlcManagers, *chanID) p.htlcManMtx.RUnlock() // Finally, we purge the channel's state from the database, leaving a // small summary for historical records. if err := channel.DeleteState(); err != nil { peerLog.Errorf("Unable to delete ChannelPoint(%v) "+ "from db: %v", chanID, err) return err } return nil } // pendingPayment represents a pending HTLC which has yet to be settled by the // upstream peer. A pending payment encapsulates the initial HTLC add request // additionally coupling the index of the HTLC within the log, and an error // channel to signal the payment requester once the payment has been fully // fufilled. type pendingPayment struct { htlc *lnwire.UpdateAddHTLC index uint64 preImage chan [32]byte err chan error } // commitmentState is the volatile+persistent state of an active channel's // commitment update state-machine. This struct is used by htlcManager's to // save meta-state required for proper functioning. type commitmentState struct { // htlcsToSettle is a list of preimages which allow us to settle one or // many of the pending HTLCs we've received from the upstream peer. htlcsToSettle map[uint64]*channeldb.Invoice // htlcsToCancel is a set of HTLCs identified by their log index which // are to be cancelled upon the next state transition. htlcsToCancel map[uint64]lnwire.FailCode // cancelReasons stores the reason why a particular HTLC was cancelled. // The index of the HTLC within the log is mapped to the cancellation // reason. This value is used to thread the proper error through to the // htlcSwitch, or subsystem that initiated the HTLC. cancelReasons map[uint64]lnwire.FailCode pendingBatch []*pendingPayment // pendingUpdate is a bool which indicates if we have a pending state // update outstanding whch has not yet been ACK'd. pendingUpdate bool // clearedHTCLs is a map of outgoing HTLCs we've committed to in our // chain which have not yet been settled by the upstream peer. clearedHTCLs map[uint64]*pendingPayment // logCommitTimer is a timer which is sent upon if we go an interval // without receiving/sending a commitment update. It's role is to // ensure both chains converge to identical state in a timely manner. // TODO(roasbeef): timer should be >> then RTT logCommitTimer *time.Timer logCommitTick <-chan time.Time // switchChan is a channel used to send packets to the htlc switch for // forwarding. switchChan chan<- *htlcPacket // sphinx is an instance of the Sphinx onion Router for this node. The // router will be used to process all incoming Sphinx packets embedded // within HTLC add messages. sphinx *sphinx.Router // pendingCircuits tracks the remote log index of the incoming HTLCs, // mapped to the processed Sphinx packet contained within the HTLC. // This map is used as a staging area between when an HTLC is added to // the log, and when it's locked into the commitment state of both // chains. Once locked in, the processed packet is sent to the switch // along with the HTLC to forward the packet to the next hop. pendingCircuits map[uint64]*sphinx.ProcessedPacket channel *lnwallet.LightningChannel chanPoint *wire.OutPoint } // htlcManager is the primary goroutine which drives a channel's commitment // update state-machine in response to messages received via several channels. // The htlcManager reads messages from the upstream (remote) peer, and also // from several possible downstream channels managed by the htlcSwitch. In the // event that an htlc needs to be forwarded, then send-only htlcPlex chan is // used which sends htlc packets to the switch for forwarding. Additionally, // the htlcManager handles acting upon all timeouts for any active HTLCs, // manages the channel's revocation window, and also the htlc trickle // queue+timer for this active channels. func (p *peer) htlcManager(channel *lnwallet.LightningChannel, htlcPlex chan<- *htlcPacket, downstreamLink <-chan *htlcPacket, upstreamLink <-chan lnwire.Message) { chanStats := channel.StateSnapshot() peerLog.Infof("HTLC manager for ChannelPoint(%v) started, "+ "our_balance=%v, their_balance=%v, chain_height=%v", channel.ChannelPoint(), chanStats.LocalBalance, chanStats.RemoteBalance, chanStats.NumUpdates) // A new session for this active channel has just started, therefore we // need to send our initial revocation window to the remote peer. for i := 0; i < lnwallet.InitialRevocationWindow; i++ { rev, err := channel.ExtendRevocationWindow() if err != nil { peerLog.Errorf("unable to expand revocation window: %v", err) continue } p.queueMsg(rev, nil) } state := &commitmentState{ channel: channel, chanPoint: channel.ChannelPoint(), clearedHTCLs: make(map[uint64]*pendingPayment), htlcsToSettle: make(map[uint64]*channeldb.Invoice), htlcsToCancel: make(map[uint64]lnwire.FailCode), cancelReasons: make(map[uint64]lnwire.FailCode), pendingCircuits: make(map[uint64]*sphinx.ProcessedPacket), sphinx: p.server.sphinx, switchChan: htlcPlex, logCommitTimer: time.NewTimer(300 * time.Millisecond), } // TODO(roasbeef): check to see if able to settle any currently pending // HTLCs // * also need signals when new invoices are added by the // invoiceRegistry batchTimer := time.NewTicker(50 * time.Millisecond) defer batchTimer.Stop() out: for { select { case <-channel.UnilateralCloseSignal: // TODO(roasbeef): need to send HTLC outputs to nursery peerLog.Warnf("Remote peer has closed ChannelPoint(%v) on-chain", state.chanPoint) if err := wipeChannel(p, channel); err != nil { peerLog.Errorf("unable to wipe channel %v", err) } p.server.breachArbiter.settledContracts <- state.chanPoint break out case <-channel.ForceCloseSignal: // TODO(roasbeef): path never taken now that server // force closes's directly? peerLog.Warnf("ChannelPoint(%v) has been force "+ "closed, disconnecting from peerID(%x)", state.chanPoint, p.id) break out case <-state.logCommitTick: // If we haven't sent or received a new commitment // update in some time, check to see if we have any // pending updates we need to commit. If so, then send // an update incrementing the unacked counter is // successfully. if !state.channel.PendingUpdates() && len(state.htlcsToSettle) == 0 { continue } if err := p.updateCommitTx(state, false); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() break out } case <-batchTimer.C: // If the current batch is empty, then we have no work // here. if len(state.pendingBatch) == 0 { continue } // Otherwise, attempt to extend the remote commitment // chain including all the currently pending entries. // If the send was unsuccessful, then abandon the // update, waiting for the revocation window to open // up. if err := p.updateCommitTx(state, false); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() break out } case pkt := <-downstreamLink: p.handleDownStreamPkt(state, pkt) case msg, ok := <-upstreamLink: // If the upstream message link is closed, this signals // that the channel itself is being closed, therefore // we exit. if !ok { break out } p.handleUpstreamMsg(state, msg) case <-p.quit: break out } } p.wg.Done() peerLog.Tracef("htlcManager for peer %v done", p) } // handleInitMsg handles the incoming init message which contains global and // local features vectors. If feature vectors are incompatible then disconnect. func (p *peer) handleInitMsg(msg *lnwire.Init) error { localSharedFeatures, err := p.server.localFeatures.Compare(msg.LocalFeatures) if err != nil { err := errors.Errorf("can compare remote and local feature "+ "vectors: %v", err) peerLog.Error(err) return err } p.localSharedFeatures = localSharedFeatures globalSharedFeatures, err := p.server.globalFeatures.Compare(msg.GlobalFeatures) if err != nil { err := errors.Errorf("can compare remote and global feature "+ "vectors: %v", err) peerLog.Error(err) return err } p.globalSharedFeatures = globalSharedFeatures return nil } // sendInitMsg sends init message to remote peer which represent our // features local and global vectors. func (p *peer) sendInitMsg() error { msg := lnwire.NewInitMessage( p.server.globalFeatures, p.server.localFeatures, ) p.queueMsg(msg, nil) return nil } // handleDownStreamPkt processes an HTLC packet sent from the downstream HTLC // Switch. Possible messages sent by the switch include requests to forward new // HTLCs, timeout previously cleared HTLCs, and finally to settle currently // cleared HTLCs with the upstream peer. func (p *peer) handleDownStreamPkt(state *commitmentState, pkt *htlcPacket) { var isSettle bool switch htlc := pkt.msg.(type) { case *lnwire.UpdateAddHTLC: // A new payment has been initiated via the // downstream channel, so we add the new HTLC // to our local log, then update the commitment // chains. htlc.ChannelPoint = *state.chanPoint index, err := state.channel.AddHTLC(htlc) if err != nil { // TODO: possibly perform fallback/retry logic // depending on type of error // TODO: send a cancel message back to the htlcSwitch. peerLog.Errorf("Adding HTLC rejected: %v", err) pkt.err <- err // Increase the available bandwidth of the link, // previously it was decremented and because // HTLC adding failed we should do the reverse // operation. htlcSwitch := p.server.htlcSwitch htlcSwitch.UpdateLink(&htlc.ChannelPoint, pkt.amt) return } p.queueMsg(htlc, nil) state.pendingBatch = append(state.pendingBatch, &pendingPayment{ htlc: htlc, index: index, preImage: pkt.preImage, err: pkt.err, }) case *lnwire.UpdateFufillHTLC: // An HTLC we forward to the switch has just settled somewhere // upstream. Therefore we settle the HTLC within the our local // state machine. pre := htlc.PaymentPreimage logIndex, err := state.channel.SettleHTLC(pre) if err != nil { // TODO(roasbeef): broadcast on-chain peerLog.Errorf("settle for incoming HTLC rejected: %v", err) p.Disconnect() return } // With the HTLC settled, we'll need to populate the wire // message to target the specific channel and HTLC to be // cancelled. htlc.ChannelPoint = *state.chanPoint htlc.ID = logIndex // Then we send the HTLC settle message to the connected peer // so we can continue the propagation of the settle message. p.queueMsg(htlc, nil) isSettle = true case *lnwire.UpdateFailHTLC: // An HTLC cancellation has been triggered somewhere upstream, // we'll remove then HTLC from our local state machine. logIndex, err := state.channel.FailHTLC(pkt.payHash) if err != nil { peerLog.Errorf("unable to cancel HTLC: %v", err) return } // With the HTLC removed, we'll need to populate the wire // message to target the specific channel and HTLC to be // cancelled. The "Reason" field will have already been set // within the switch. htlc.ChannelPoint = *state.chanPoint htlc.ID = logIndex // Finally, we send the HTLC message to the peer which // initially created the HTLC. p.queueMsg(htlc, nil) isSettle = true } // If this newly added update exceeds the min batch size for adds, or // this is a settle request, then initiate an update. // TODO(roasbeef): enforce max HTLCs in flight limit if len(state.pendingBatch) >= 10 || isSettle { if err := p.updateCommitTx(state, false); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() return } } } // handleUpstreamMsg processes wire messages related to commitment state // updates from the upstream peer. The upstream peer is the peer whom we have a // direct channel with, updating our respective commitment chains. func (p *peer) handleUpstreamMsg(state *commitmentState, msg lnwire.Message) { switch htlcPkt := msg.(type) { // TODO(roasbeef): timeouts // * fail if can't parse sphinx mix-header case *lnwire.UpdateAddHTLC: // Before adding the new HTLC to the state machine, parse the // onion object in order to obtain the routing information. blobReader := bytes.NewReader(htlcPkt.OnionBlob[:]) onionPkt := &sphinx.OnionPacket{} if err := onionPkt.Decode(blobReader); err != nil { peerLog.Errorf("unable to decode onion pkt: %v", err) p.Disconnect() return } // We just received an add request from an upstream peer, so we // add it to our state machine, then add the HTLC to our // "settle" list in the event that we know the preimage index, err := state.channel.ReceiveHTLC(htlcPkt) if err != nil { peerLog.Errorf("Receiving HTLC rejected: %v", err) return } // TODO(roasbeef): perform sanity checks on per-hop payload // * time-lock is sane, fee, chain, etc // Attempt to process the Sphinx packet. We include the payment // hash of the HTLC as it's authenticated within the Sphinx // packet itself as associated data in order to thwart attempts // a replay attacks. In the case of a replay, an attacker is // *forced* to use the same payment hash twice, thereby losing // their money entirely. rHash := htlcPkt.PaymentHash[:] sphinxPacket, err := state.sphinx.ProcessOnionPacket(onionPkt, rHash) if err != nil { // If we're unable to parse the Sphinx packet, then // we'll cancel the HTLC after the current commitment // transition. peerLog.Errorf("unable to process onion pkt: %v", err) state.htlcsToCancel[index] = lnwire.SphinxParseError return } switch sphinxPacket.Action { // We're the designated payment destination. Therefore we // attempt to see if we have an invoice locally which'll allow // us to settle this HTLC. case sphinx.ExitNode: rHash := htlcPkt.PaymentHash invoice, err := p.server.invoices.LookupInvoice(rHash) if err != nil { // If we're the exit node, but don't recognize // the payment hash, then we'll fail the HTLC // on the next state transition. peerLog.Errorf("unable to settle HTLC, "+ "payment hash (%x) unrecognized", rHash[:]) state.htlcsToCancel[index] = lnwire.UnknownPaymentHash return } // If we're not currently in debug mode, and the // extended HTLC doesn't meet the value requested, then // we'll fail the HTLC. if !cfg.DebugHTLC && htlcPkt.Amount < invoice.Terms.Value { peerLog.Errorf("rejecting HTLC due to incorrect "+ "amount: expected %v, received %v", invoice.Terms.Value, htlcPkt.Amount) state.htlcsToCancel[index] = lnwire.IncorrectValue } else { // Otherwise, everything is in order and we'll // settle the HTLC after the current state // transition. state.htlcsToSettle[index] = invoice } // There are additional hops left within this route, so we // track the next hop according to the index of this HTLC // within their log. When forwarding locked-in HLTC's to the // switch, we'll attach the routing information so the switch // can finalize the circuit. case sphinx.MoreHops: state.pendingCircuits[index] = sphinxPacket default: peerLog.Errorf("mal formed onion packet") state.htlcsToCancel[index] = lnwire.SphinxParseError } case *lnwire.UpdateFufillHTLC: pre := htlcPkt.PaymentPreimage idx := htlcPkt.ID if err := state.channel.ReceiveHTLCSettle(pre, idx); err != nil { // TODO(roasbeef): broadcast on-chain peerLog.Errorf("settle for outgoing HTLC rejected: %v", err) p.Disconnect() return } // TODO(roasbeef): add preimage to DB in order to swipe // repeated r-values case *lnwire.UpdateFailHTLC: idx := htlcPkt.ID if err := state.channel.ReceiveFailHTLC(idx); err != nil { peerLog.Errorf("unable to recv HTLC cancel: %v", err) p.Disconnect() return } state.cancelReasons[idx] = lnwire.FailCode(htlcPkt.Reason[0]) case *lnwire.CommitSig: // We just received a new update to our local commitment chain, // validate this new commitment, closing the link if invalid. // TODO(roasbeef): redundant re-serialization sig := htlcPkt.CommitSig.Serialize() if err := state.channel.ReceiveNewCommitment(sig); err != nil { peerLog.Errorf("unable to accept new commitment: %v", err) p.Disconnect() return } // As we've just just accepted a new state, we'll now // immediately send the remote peer a revocation for our prior // state. nextRevocation, err := state.channel.RevokeCurrentCommitment() if err != nil { peerLog.Errorf("unable to revoke commitment: %v", err) return } p.queueMsg(nextRevocation, nil) // If we just initiated a state transition, and we were waiting // for a reply from the remote peer, then we don't need to // response with a subsequent CommitSig message. So we toggle // the `pendingUpdate` bool, and set a timer to wake us up in // the future to check if we have any updates we need to // commit. if state.pendingUpdate { state.pendingUpdate = false if !state.logCommitTimer.Stop() { select { case <-state.logCommitTimer.C: default: } } state.logCommitTimer.Reset(300 * time.Millisecond) state.logCommitTick = state.logCommitTimer.C return } // Otherwise, the remote party initiated the state transition, // so we'll reply with a signature to provide them with their // version of the latest commitment state. if err := p.updateCommitTx(state, true); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() return } case *lnwire.RevokeAndAck: // We've received a revocation from the remote chain, if valid, // this moves the remote chain forward, and expands our // revocation window. htlcsToForward, err := state.channel.ReceiveRevocation(htlcPkt) if err != nil { peerLog.Errorf("unable to accept revocation: %v", err) p.Disconnect() return } // If any of the HTLCs eligible for forwarding are pending // settling or timing out previous outgoing payments, then we // can them from the pending set, and signal the requester (if // existing) that the payment has been fully fulfilled. var bandwidthUpdate btcutil.Amount settledPayments := make(map[lnwallet.PaymentHash]struct{}) cancelledHtlcs := make(map[uint64]struct{}) for _, htlc := range htlcsToForward { parentIndex := htlc.ParentIndex if p, ok := state.clearedHTCLs[parentIndex]; ok { switch htlc.EntryType { // If the HTLC was settled successfully, then // we return a nil error as well as the payment // preimage back to the possible caller. case lnwallet.Settle: p.preImage <- htlc.RPreimage p.err <- nil // Otherwise, the HTLC failed, so we propagate // the error back to the potential caller. case lnwallet.Fail: errMsg := state.cancelReasons[parentIndex] p.preImage <- [32]byte{} p.err <- errors.New(errMsg.String()) } delete(state.clearedHTCLs, htlc.ParentIndex) } // TODO(roasbeef): rework log entries to a shared // interface. if htlc.EntryType != lnwallet.Add { continue } // If we can settle this HTLC within our local state // update log, then send the update entry to the remote // party. invoice, ok := state.htlcsToSettle[htlc.Index] if ok { preimage := invoice.Terms.PaymentPreimage logIndex, err := state.channel.SettleHTLC(preimage) if err != nil { peerLog.Errorf("unable to settle htlc: %v", err) p.Disconnect() continue } settleMsg := &lnwire.UpdateFufillHTLC{ ChannelPoint: *state.chanPoint, ID: logIndex, PaymentPreimage: preimage, } p.queueMsg(settleMsg, nil) delete(state.htlcsToSettle, htlc.Index) settledPayments[htlc.RHash] = struct{}{} bandwidthUpdate += htlc.Amount continue } // Alternatively, if we marked this HTLC for // cancellation, then immediately cancel the HTLC as // it's now locked in within both commitment // transactions. reason, ok := state.htlcsToCancel[htlc.Index] if !ok { continue } logIndex, err := state.channel.FailHTLC(htlc.RHash) if err != nil { peerLog.Errorf("unable to cancel htlc: %v", err) p.Disconnect() continue } cancelMsg := &lnwire.UpdateFailHTLC{ ChannelPoint: *state.chanPoint, ID: logIndex, Reason: []byte{byte(reason)}, } p.queueMsg(cancelMsg, nil) delete(state.htlcsToCancel, htlc.Index) cancelledHtlcs[htlc.Index] = struct{}{} } go func() { for _, htlc := range htlcsToForward { // We don't need to forward any HTLCs that we // just settled or cancelled above. // TODO(roasbeef): key by index instead? if _, ok := settledPayments[htlc.RHash]; ok { continue } if _, ok := cancelledHtlcs[htlc.Index]; ok { continue } onionPkt := state.pendingCircuits[htlc.Index] delete(state.pendingCircuits, htlc.Index) reason := state.cancelReasons[htlc.ParentIndex] delete(state.cancelReasons, htlc.ParentIndex) // Send this fully activated HTLC to the htlc // switch to continue the chained clear/settle. pkt, err := logEntryToHtlcPkt(*state.chanPoint, htlc, onionPkt, reason) if err != nil { peerLog.Errorf("unable to make htlc pkt: %v", err) continue } state.switchChan <- pkt } }() if len(settledPayments) == 0 && len(cancelledHtlcs) == 0 { return } // Send an update to the htlc switch of our newly available // payment bandwidth. // TODO(roasbeef): ideally should wait for next state update. if bandwidthUpdate != 0 { p.server.htlcSwitch.UpdateLink(state.chanPoint, bandwidthUpdate) } // With all the settle updates added to the local and remote // HTLC logs, initiate a state transition by updating the // remote commitment chain. if err := p.updateCommitTx(state, false); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() return } // Notify the invoiceRegistry of the invoices we just settled // with this latest commitment update. // TODO(roasbeef): wait until next transition? for invoice := range settledPayments { err := p.server.invoices.SettleInvoice(chainhash.Hash(invoice)) if err != nil { peerLog.Errorf("unable to settle invoice: %v", err) } } } } // updateCommitTx signs, then sends an update to the remote peer adding a new // commitment to their commitment chain which includes all the latest updates // we've received+processed up to this point. func (p *peer) updateCommitTx(state *commitmentState, reply bool) error { sigTheirs, err := state.channel.SignNextCommitment() if err == lnwallet.ErrNoWindow { peerLog.Tracef("revocation window exhausted, unable to send %v", len(state.pendingBatch)) return nil } else if err != nil { return err } parsedSig, err := btcec.ParseSignature(sigTheirs, btcec.S256()) if err != nil { return fmt.Errorf("unable to parse sig: %v", err) } commitSig := &lnwire.CommitSig{ ChannelPoint: *state.chanPoint, CommitSig: parsedSig, } p.queueMsg(commitSig, nil) // As we've just cleared out a batch, move all pending updates to the // map of cleared HTLCs, clearing out the set of pending updates. for _, update := range state.pendingBatch { state.clearedHTCLs[update.index] = update } // We've just initiated a state transition, attempt to stop the // logCommitTimer. If the timer already ticked, then we'll consume the // value, dropping if state.logCommitTimer != nil && !state.logCommitTimer.Stop() { select { case <-state.logCommitTimer.C: default: } } state.logCommitTick = nil // Finally, clear our the current batch, and flip the pendingUpdate // bool to indicate were waiting for a commitment signature. // TODO(roasbeef): re-slice instead to avoid GC? state.pendingBatch = nil // If this isn't a reply to a state transitioned initiated by the // remote node, then we toggle the `pendingUpdate` bool to indicate // that we're waiting for a CommitSig in response. if !reply { state.pendingUpdate = true } return nil } // fetchNextPendingChanID provides unique IDs for each channel opened between // two peers func (p *peer) fetchNextPendingChanID() uint64 { p.pendingChannelMtx.Lock() defer p.pendingChannelMtx.Unlock() chanID := p.nextPendingChannelID p.nextPendingChannelID++ return chanID } // logEntryToHtlcPkt converts a particular Lightning Commitment Protocol (LCP) // log entry the corresponding htlcPacket with src/dest set along with the // proper wire message. This helper method is provided in order to aid an // htlcManager in forwarding packets to the htlcSwitch. func logEntryToHtlcPkt(chanPoint wire.OutPoint, pd *lnwallet.PaymentDescriptor, onionPkt *sphinx.ProcessedPacket, reason lnwire.FailCode) (*htlcPacket, error) { pkt := &htlcPacket{} // TODO(roasbeef): alter after switch to log entry interface var msg lnwire.Message switch pd.EntryType { case lnwallet.Add: // TODO(roasbeef): timeout, onion blob, etc var b bytes.Buffer if err := onionPkt.Packet.Encode(&b); err != nil { return nil, err } htlc := &lnwire.UpdateAddHTLC{ Amount: btcutil.Amount(pd.Amount), PaymentHash: pd.RHash, } copy(htlc.OnionBlob[:], b.Bytes()) msg = htlc case lnwallet.Settle: msg = &lnwire.UpdateFufillHTLC{ PaymentPreimage: pd.RPreimage, } case lnwallet.Fail: // For cancellation messages, we'll also need to set the rHash // within the htlcPacket so the switch knows on which outbound // link to forward the cancellation message msg = &lnwire.UpdateFailHTLC{ Reason: []byte{byte(reason)}, } pkt.payHash = pd.RHash } pkt.amt = pd.Amount pkt.msg = msg pkt.srcLink = chanPoint pkt.onion = onionPkt return pkt, nil } // TODO(roasbeef): make all start/stop mutexes a CAS