package lnd import ( "bytes" "encoding/binary" "fmt" "sync" "time" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/btcsuite/btcd/txscript" "github.com/btcsuite/btcd/wire" "github.com/btcsuite/btcutil" "github.com/coreos/bbolt" "github.com/davecgh/go-spew/spew" "github.com/go-errors/errors" "github.com/lightningnetwork/lnd/chainntnfs" "github.com/lightningnetwork/lnd/chanacceptor" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/discovery" "github.com/lightningnetwork/lnd/htlcswitch" "github.com/lightningnetwork/lnd/input" "github.com/lightningnetwork/lnd/keychain" "github.com/lightningnetwork/lnd/lnpeer" "github.com/lightningnetwork/lnd/lnrpc" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwallet/chainfee" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/routing" "golang.org/x/crypto/salsa20" ) const ( // TODO(roasbeef): tune msgBufferSize = 50 // minBtcRemoteDelay and maxBtcRemoteDelay is the extremes of the // Bitcoin CSV delay we will require the remote to use for its // commitment transaction. The actual delay we will require will be // somewhere between these values, depending on channel size. minBtcRemoteDelay uint16 = 144 maxBtcRemoteDelay uint16 = 2016 // minLtcRemoteDelay and maxLtcRemoteDelay is the extremes of the // Litecoin CSV delay we will require the remote to use for its // commitment transaction. The actual delay we will require will be // somewhere between these values, depending on channel size. minLtcRemoteDelay uint16 = 576 maxLtcRemoteDelay uint16 = 8064 // maxWaitNumBlocksFundingConf is the maximum number of blocks to wait // for the funding transaction to be confirmed before forgetting // channels that aren't initiated by us. 2016 blocks is ~2 weeks. maxWaitNumBlocksFundingConf = 2016 // minChanFundingSize is the smallest channel that we'll allow to be // created over the RPC interface. minChanFundingSize = btcutil.Amount(20000) // MaxBtcFundingAmount is a soft-limit of the maximum channel size // currently accepted on the Bitcoin chain within the Lightning // Protocol. This limit is defined in BOLT-0002, and serves as an // initial precautionary limit while implementations are battle tested // in the real world. MaxBtcFundingAmount = btcutil.Amount(1<<24) - 1 // maxLtcFundingAmount is a soft-limit of the maximum channel size // currently accepted on the Litecoin chain within the Lightning // Protocol. maxLtcFundingAmount = MaxBtcFundingAmount * btcToLtcConversionRate ) var ( // MaxFundingAmount is a soft-limit of the maximum channel size // currently accepted within the Lightning Protocol. This limit is // defined in BOLT-0002, and serves as an initial precautionary limit // while implementations are battle tested in the real world. // // At the moment, this value depends on which chain is active. It is set // to the value under the Bitcoin chain as default. // // TODO(roasbeef): add command line param to modify MaxFundingAmount = MaxBtcFundingAmount // ErrFundingManagerShuttingDown is an error returned when attempting to // process a funding request/message but the funding manager has already // been signaled to shut down. ErrFundingManagerShuttingDown = errors.New("funding manager shutting " + "down") // ErrConfirmationTimeout is an error returned when we as a responder // are waiting for a funding transaction to confirm, but too many // blocks pass without confirmation. ErrConfirmationTimeout = errors.New("timeout waiting for funding " + "confirmation") // errUpfrontShutdownScriptNotSupported is returned if an upfront shutdown // script is set for a peer that does not support the feature bit. errUpfrontShutdownScriptNotSupported = errors.New("peer does not support" + "option upfront shutdown script") zeroID [32]byte ) // reservationWithCtx encapsulates a pending channel reservation. This wrapper // struct is used internally within the funding manager to track and progress // the funding workflow initiated by incoming/outgoing methods from the target // peer. Additionally, this struct houses a response and error channel which is // used to respond to the caller in the case a channel workflow is initiated // via a local signal such as RPC. // // TODO(roasbeef): actually use the context package // * deadlines, etc. type reservationWithCtx struct { reservation *lnwallet.ChannelReservation peer lnpeer.Peer chanAmt btcutil.Amount // Constraints we require for the remote. remoteCsvDelay uint16 remoteMinHtlc lnwire.MilliSatoshi updateMtx sync.RWMutex lastUpdated time.Time updates chan *lnrpc.OpenStatusUpdate err chan error } // isLocked checks the reservation's timestamp to determine whether it is locked. func (r *reservationWithCtx) isLocked() bool { r.updateMtx.RLock() defer r.updateMtx.RUnlock() // The time zero value represents a locked reservation. return r.lastUpdated.IsZero() } // updateTimestamp updates the reservation's timestamp with the current time. func (r *reservationWithCtx) updateTimestamp() { r.updateMtx.Lock() defer r.updateMtx.Unlock() r.lastUpdated = time.Now() } // initFundingMsg is sent by an outside subsystem to the funding manager in // order to kick off a funding workflow with a specified target peer. The // original request which defines the parameters of the funding workflow are // embedded within this message giving the funding manager full context w.r.t // the workflow. type initFundingMsg struct { peer lnpeer.Peer *openChanReq } // fundingOpenMsg couples an lnwire.OpenChannel message with the peer who sent // the message. This allows the funding manager to queue a response directly to // the peer, progressing the funding workflow. type fundingOpenMsg struct { msg *lnwire.OpenChannel peer lnpeer.Peer } // fundingAcceptMsg couples an lnwire.AcceptChannel message with the peer who // sent the message. This allows the funding manager to queue a response // directly to the peer, progressing the funding workflow. type fundingAcceptMsg struct { msg *lnwire.AcceptChannel peer lnpeer.Peer } // fundingCreatedMsg couples an lnwire.FundingCreated message with the peer who // sent the message. This allows the funding manager to queue a response // directly to the peer, progressing the funding workflow. type fundingCreatedMsg struct { msg *lnwire.FundingCreated peer lnpeer.Peer } // fundingSignedMsg couples an lnwire.FundingSigned message with the peer who // sent the message. This allows the funding manager to queue a response // directly to the peer, progressing the funding workflow. type fundingSignedMsg struct { msg *lnwire.FundingSigned peer lnpeer.Peer } // fundingLockedMsg couples an lnwire.FundingLocked message with the peer who // sent the message. This allows the funding manager to finalize the funding // process and announce the existence of the new channel. type fundingLockedMsg struct { msg *lnwire.FundingLocked peer lnpeer.Peer } // fundingErrorMsg couples an lnwire.Error message with the peer who sent the // message. This allows the funding manager to properly process the error. type fundingErrorMsg struct { err *lnwire.Error peerKey *btcec.PublicKey } // pendingChannels is a map instantiated per-peer which tracks all active // pending single funded channels indexed by their pending channel identifier, // which is a set of 32-bytes generated via a CSPRNG. type pendingChannels map[[32]byte]*reservationWithCtx // serializedPubKey is used within the FundingManager's activeReservations list // to identify the nodes with which the FundingManager is actively working to // initiate new channels. type serializedPubKey [33]byte // newSerializedKey creates a new serialized public key from an instance of a // live pubkey object. func newSerializedKey(pubKey *btcec.PublicKey) serializedPubKey { var s serializedPubKey copy(s[:], pubKey.SerializeCompressed()) return s } // fundingConfig defines the configuration for the FundingManager. All elements // within the configuration MUST be non-nil for the FundingManager to carry out // its duties. type fundingConfig struct { // IDKey is the PublicKey that is used to identify this node within the // Lightning Network. IDKey *btcec.PublicKey // Wallet handles the parts of the funding process that involves moving // funds from on-chain transaction outputs into Lightning channels. Wallet *lnwallet.LightningWallet // PublishTransaction facilitates the process of broadcasting a // transaction to the network. PublishTransaction func(*wire.MsgTx) error // FeeEstimator calculates appropriate fee rates based on historical // transaction information. FeeEstimator chainfee.Estimator // Notifier is used by the FundingManager to determine when the // channel's funding transaction has been confirmed on the blockchain // so that the channel creation process can be completed. Notifier chainntnfs.ChainNotifier // SignMessage signs an arbitrary message with a given public key. The // actual digest signed is the double sha-256 of the message. In the // case that the private key corresponding to the passed public key // cannot be located, then an error is returned. // // TODO(roasbeef): should instead pass on this responsibility to a // distinct sub-system? SignMessage func(pubKey *btcec.PublicKey, msg []byte) (*btcec.Signature, error) // CurrentNodeAnnouncement should return the latest, fully signed node // announcement from the backing Lightning Network node. CurrentNodeAnnouncement func() (lnwire.NodeAnnouncement, error) // SendAnnouncement is used by the FundingManager to send announcement // messages to the Gossiper to possibly broadcast to the greater // network. A set of optional message fields can be provided to populate // any information within the graph that is not included in the gossip // message. SendAnnouncement func(msg lnwire.Message, optionalFields ...discovery.OptionalMsgField) chan error // NotifyWhenOnline allows the FundingManager to register with a // subsystem that will notify it when the peer comes online. This is // used when sending the fundingLocked message, since it MUST be // delivered after the funding transaction is confirmed. // // NOTE: The peerChan channel must be buffered. NotifyWhenOnline func(peer [33]byte, peerChan chan<- lnpeer.Peer) // FindChannel queries the database for the channel with the given // channel ID. FindChannel func(chanID lnwire.ChannelID) (*channeldb.OpenChannel, error) // TempChanIDSeed is a cryptographically random string of bytes that's // used as a seed to generate pending channel ID's. TempChanIDSeed [32]byte // DefaultRoutingPolicy is the default routing policy used when // initially announcing channels. DefaultRoutingPolicy htlcswitch.ForwardingPolicy // DefaultMinHtlcIn is the default minimum incoming htlc value that is // set as a channel parameter. DefaultMinHtlcIn lnwire.MilliSatoshi // NumRequiredConfs is a function closure that helps the funding // manager decide how many confirmations it should require for a // channel extended to it. The function is able to take into account // the amount of the channel, and any funds we'll be pushed in the // process to determine how many confirmations we'll require. NumRequiredConfs func(btcutil.Amount, lnwire.MilliSatoshi) uint16 // RequiredRemoteDelay is a function that maps the total amount in a // proposed channel to the CSV delay that we'll require for the remote // party. Naturally a larger channel should require a higher CSV delay // in order to give us more time to claim funds in the case of a // contract breach. RequiredRemoteDelay func(btcutil.Amount) uint16 // RequiredRemoteChanReserve is a function closure that, given the // channel capacity and dust limit, will return an appropriate amount // for the remote peer's required channel reserve that is to be adhered // to at all times. RequiredRemoteChanReserve func(capacity, dustLimit btcutil.Amount) btcutil.Amount // RequiredRemoteMaxValue is a function closure that, given the channel // capacity, returns the amount of MilliSatoshis that our remote peer // can have in total outstanding HTLCs with us. RequiredRemoteMaxValue func(btcutil.Amount) lnwire.MilliSatoshi // RequiredRemoteMaxHTLCs is a function closure that, given the channel // capacity, returns the number of maximum HTLCs the remote peer can // offer us. RequiredRemoteMaxHTLCs func(btcutil.Amount) uint16 // WatchNewChannel is to be called once a new channel enters the final // funding stage: waiting for on-chain confirmation. This method sends // the channel to the ChainArbitrator so it can watch for any on-chain // events related to the channel. We also provide the public key of the // node we're establishing a channel with for reconnection purposes. WatchNewChannel func(*channeldb.OpenChannel, *btcec.PublicKey) error // ReportShortChanID allows the funding manager to report the newly // discovered short channel ID of a formerly pending channel to outside // sub-systems. ReportShortChanID func(wire.OutPoint) error // ZombieSweeperInterval is the periodic time interval in which the // zombie sweeper is run. ZombieSweeperInterval time.Duration // ReservationTimeout is the length of idle time that must pass before // a reservation is considered a zombie. ReservationTimeout time.Duration // MinChanSize is the smallest channel size that we'll accept as an // inbound channel. We have such a parameter, as otherwise, nodes could // flood us with very small channels that would never really be usable // due to fees. MinChanSize btcutil.Amount // MaxPendingChannels is the maximum number of pending channels we // allow for each peer. MaxPendingChannels int // RejectPush is set true if the fundingmanager should reject any // incoming channels having a non-zero push amount. RejectPush bool // NotifyOpenChannelEvent informs the ChannelNotifier when channels // transition from pending open to open. NotifyOpenChannelEvent func(wire.OutPoint) // OpenChannelPredicate is a predicate on the lnwire.OpenChannel message // and on the requesting node's public key that returns a bool which tells // the funding manager whether or not to accept the channel. OpenChannelPredicate chanacceptor.ChannelAcceptor // NotifyPendingOpenChannelEvent informs the ChannelNotifier when channels // enter a pending state. NotifyPendingOpenChannelEvent func(wire.OutPoint) } // fundingManager acts as an orchestrator/bridge between the wallet's // 'ChannelReservation' workflow, and the wire protocol's funding initiation // messages. Any requests to initiate the funding workflow for a channel, // either kicked-off locally or remotely are handled by the funding manager. // Once a channel's funding workflow has been completed, any local callers, the // local peer, and possibly the remote peer are notified of the completion of // the channel workflow. Additionally, any temporary or permanent access // controls between the wallet and remote peers are enforced via the funding // manager. type fundingManager struct { started sync.Once stopped sync.Once // cfg is a copy of the configuration struct that the FundingManager // was initialized with. cfg *fundingConfig // chanIDKey is a cryptographically random key that's used to generate // temporary channel ID's. chanIDKey [32]byte // chanIDNonce is a nonce that's incremented for each new funding // reservation created. nonceMtx sync.RWMutex chanIDNonce uint64 // activeReservations is a map which houses the state of all pending // funding workflows. activeReservations map[serializedPubKey]pendingChannels // signedReservations is a utility map that maps the permanent channel // ID of a funding reservation to its temporary channel ID. This is // required as mid funding flow, we switch to referencing the channel // by its full channel ID once the commitment transactions have been // signed by both parties. signedReservations map[lnwire.ChannelID][32]byte // resMtx guards both of the maps above to ensure that all access is // goroutine safe. resMtx sync.RWMutex // fundingMsgs is a channel which receives wrapped wire messages // related to funding workflow from outside peers. fundingMsgs chan interface{} // queries is a channel which receives requests to query the internal // state of the funding manager. queries chan interface{} // fundingRequests is a channel used to receive channel initiation // requests from a local subsystem within the daemon. fundingRequests chan *initFundingMsg // newChanBarriers is a map from a channel ID to a 'barrier' which will // be signalled once the channel is fully open. This barrier acts as a // synchronization point for any incoming/outgoing HTLCs before the // channel has been fully opened. barrierMtx sync.RWMutex newChanBarriers map[lnwire.ChannelID]chan struct{} localDiscoveryMtx sync.Mutex localDiscoverySignals map[lnwire.ChannelID]chan struct{} handleFundingLockedMtx sync.RWMutex handleFundingLockedBarriers map[lnwire.ChannelID]struct{} quit chan struct{} wg sync.WaitGroup } // channelOpeningState represents the different states a channel can be in // between the funding transaction has been confirmed and the channel is // announced to the network and ready to be used. type channelOpeningState uint8 const ( // markedOpen is the opening state of a channel if the funding // transaction is confirmed on-chain, but fundingLocked is not yet // successfully sent to the other peer. markedOpen channelOpeningState = iota // fundingLockedSent is the opening state of a channel if the // fundingLocked message has successfully been sent to the other peer, // but we still haven't announced the channel to the network. fundingLockedSent // addedToRouterGraph is the opening state of a channel if the // channel has been successfully added to the router graph // immediately after the fundingLocked message has been sent, but // we still haven't announced the channel to the network. addedToRouterGraph ) var ( // channelOpeningStateBucket is the database bucket used to store the // channelOpeningState for each channel that is currently in the process // of being opened. channelOpeningStateBucket = []byte("channelOpeningState") // ErrChannelNotFound is an error returned when a channel is not known // to us. In this case of the fundingManager, this error is returned // when the channel in question is not considered being in an opening // state. ErrChannelNotFound = fmt.Errorf("channel not found") ) // newFundingManager creates and initializes a new instance of the // fundingManager. func newFundingManager(cfg fundingConfig) (*fundingManager, error) { return &fundingManager{ cfg: &cfg, chanIDKey: cfg.TempChanIDSeed, activeReservations: make(map[serializedPubKey]pendingChannels), signedReservations: make(map[lnwire.ChannelID][32]byte), newChanBarriers: make(map[lnwire.ChannelID]chan struct{}), fundingMsgs: make(chan interface{}, msgBufferSize), fundingRequests: make(chan *initFundingMsg, msgBufferSize), localDiscoverySignals: make(map[lnwire.ChannelID]chan struct{}), handleFundingLockedBarriers: make(map[lnwire.ChannelID]struct{}), queries: make(chan interface{}, 1), quit: make(chan struct{}), }, nil } // Start launches all helper goroutines required for handling requests sent // to the funding manager. func (f *fundingManager) Start() error { var err error f.started.Do(func() { err = f.start() }) return err } func (f *fundingManager) start() error { fndgLog.Tracef("Funding manager running") // Upon restart, the Funding Manager will check the database to load any // channels that were waiting for their funding transactions to be // confirmed on the blockchain at the time when the daemon last went // down. // TODO(roasbeef): store height that funding finished? // * would then replace call below allChannels, err := f.cfg.Wallet.Cfg.Database.FetchAllChannels() if err != nil { return err } for _, channel := range allChannels { chanID := lnwire.NewChanIDFromOutPoint(&channel.FundingOutpoint) // For any channels that were in a pending state when the // daemon was last connected, the Funding Manager will // re-initialize the channel barriers, and republish the // funding transaction if we're the initiator. if channel.IsPending { f.barrierMtx.Lock() fndgLog.Tracef("Loading pending ChannelPoint(%v), "+ "creating chan barrier", channel.FundingOutpoint) f.newChanBarriers[chanID] = make(chan struct{}) f.barrierMtx.Unlock() f.localDiscoverySignals[chanID] = make(chan struct{}) // Rebroadcast the funding transaction for any pending // channel that we initiated. No error will be returned // if the transaction already has been broadcast. chanType := channel.ChanType if chanType.IsSingleFunder() && chanType.HasFundingTx() && channel.IsInitiator { err := f.cfg.PublishTransaction( channel.FundingTxn, ) if err != nil { fndgLog.Errorf("Unable to rebroadcast "+ "funding tx for "+ "ChannelPoint(%v): %v", channel.FundingOutpoint, err) } } } // We will restart the funding state machine for all channels, // which will wait for the channel's funding transaction to be // confirmed on the blockchain, and transmit the messages // necessary for the channel to be operational. f.wg.Add(1) go f.advanceFundingState(channel, chanID, nil) } f.wg.Add(1) // TODO(roasbeef): tune go f.reservationCoordinator() return nil } // Stop signals all helper goroutines to execute a graceful shutdown. This // method will block until all goroutines have exited. func (f *fundingManager) Stop() error { var err error f.stopped.Do(func() { err = f.stop() }) return err } func (f *fundingManager) stop() error { fndgLog.Infof("Funding manager shutting down") close(f.quit) f.wg.Wait() return nil } // nextPendingChanID returns the next free pending channel ID to be used to // identify a particular future channel funding workflow. func (f *fundingManager) nextPendingChanID() [32]byte { // Obtain a fresh nonce. We do this by encoding the current nonce // counter, then incrementing it by one. f.nonceMtx.Lock() var nonce [8]byte binary.LittleEndian.PutUint64(nonce[:], f.chanIDNonce) f.chanIDNonce++ f.nonceMtx.Unlock() // We'll generate the next pending channelID by "encrypting" 32-bytes // of zeroes which'll extract 32 random bytes from our stream cipher. var ( nextChanID [32]byte zeroes [32]byte ) salsa20.XORKeyStream(nextChanID[:], zeroes[:], nonce[:], &f.chanIDKey) return nextChanID } type pendingChannel struct { identityPub *btcec.PublicKey channelPoint *wire.OutPoint capacity btcutil.Amount localBalance btcutil.Amount remoteBalance btcutil.Amount } type pendingChansReq struct { resp chan []*pendingChannel err chan error } // PendingChannels returns a slice describing all the channels which are // currently pending at the last state of the funding workflow. func (f *fundingManager) PendingChannels() ([]*pendingChannel, error) { respChan := make(chan []*pendingChannel, 1) errChan := make(chan error, 1) req := &pendingChansReq{ resp: respChan, err: errChan, } select { case f.queries <- req: case <-f.quit: return nil, ErrFundingManagerShuttingDown } select { case resp := <-respChan: return resp, nil case err := <-errChan: return nil, err case <-f.quit: return nil, ErrFundingManagerShuttingDown } } // CancelPeerReservations cancels all active reservations associated with the // passed node. This will ensure any outputs which have been pre committed, // (and thus locked from coin selection), are properly freed. func (f *fundingManager) CancelPeerReservations(nodePub [33]byte) { fndgLog.Debugf("Cancelling all reservations for peer %x", nodePub[:]) f.resMtx.Lock() defer f.resMtx.Unlock() // We'll attempt to look up this node in the set of active // reservations. If they don't have any, then there's no further work // to be done. nodeReservations, ok := f.activeReservations[nodePub] if !ok { fndgLog.Debugf("No active reservations for node: %x", nodePub[:]) return } // If they do have any active reservations, then we'll cancel all of // them (which releases any locked UTXO's), and also delete it from the // reservation map. for pendingID, resCtx := range nodeReservations { if err := resCtx.reservation.Cancel(); err != nil { fndgLog.Errorf("unable to cancel reservation for "+ "node=%x: %v", nodePub[:], err) } resCtx.err <- fmt.Errorf("peer disconnected") delete(nodeReservations, pendingID) } // Finally, we'll delete the node itself from the set of reservations. delete(f.activeReservations, nodePub) } // failFundingFlow will fail the active funding flow with the target peer, // identified by its unique temporary channel ID. This method will send an // error to the remote peer, and also remove the reservation from our set of // pending reservations. // // TODO(roasbeef): if peer disconnects, and haven't yet broadcast funding // transaction, then all reservations should be cleared. func (f *fundingManager) failFundingFlow(peer lnpeer.Peer, tempChanID [32]byte, fundingErr error) { fndgLog.Debugf("Failing funding flow for pending_id=%x: %v", tempChanID, fundingErr) ctx, err := f.cancelReservationCtx(peer.IdentityKey(), tempChanID) if err != nil { fndgLog.Errorf("unable to cancel reservation: %v", err) } // In case the case where the reservation existed, send the funding // error on the error channel. if ctx != nil { ctx.err <- fundingErr } // We only send the exact error if it is part of out whitelisted set of // errors (lnwire.FundingError or lnwallet.ReservationError). var msg lnwire.ErrorData switch e := fundingErr.(type) { // Let the actual error message be sent to the remote for the // whitelisted types. case lnwallet.ReservationError: msg = lnwire.ErrorData(e.Error()) case lnwire.FundingError: msg = lnwire.ErrorData(e.Error()) // For all other error types we just send a generic error. default: msg = lnwire.ErrorData("funding failed due to internal error") } errMsg := &lnwire.Error{ ChanID: tempChanID, Data: msg, } fndgLog.Debugf("Sending funding error to peer (%x): %v", peer.IdentityKey().SerializeCompressed(), spew.Sdump(errMsg)) if err := peer.SendMessage(false, errMsg); err != nil { fndgLog.Errorf("unable to send error message to peer %v", err) } } // reservationCoordinator is the primary goroutine tasked with progressing the // funding workflow between the wallet, and any outside peers or local callers. // // NOTE: This MUST be run as a goroutine. func (f *fundingManager) reservationCoordinator() { defer f.wg.Done() zombieSweepTicker := time.NewTicker(f.cfg.ZombieSweeperInterval) defer zombieSweepTicker.Stop() for { select { case msg := <-f.fundingMsgs: switch fmsg := msg.(type) { case *fundingOpenMsg: f.handleFundingOpen(fmsg) case *fundingAcceptMsg: f.handleFundingAccept(fmsg) case *fundingCreatedMsg: f.handleFundingCreated(fmsg) case *fundingSignedMsg: f.handleFundingSigned(fmsg) case *fundingLockedMsg: f.wg.Add(1) go f.handleFundingLocked(fmsg) case *fundingErrorMsg: f.handleErrorMsg(fmsg) } case req := <-f.fundingRequests: f.handleInitFundingMsg(req) case <-zombieSweepTicker.C: f.pruneZombieReservations() case req := <-f.queries: switch msg := req.(type) { case *pendingChansReq: f.handlePendingChannels(msg) } case <-f.quit: return } } } // advanceFundingState will advance the channel through the steps after the // funding transaction is broadcasted, up until the point where the channel is // ready for operation. This includes waiting for the funding transaction to // confirm, sending funding locked to the peer, adding the channel to the // router graph, and announcing the channel. The updateChan can be set non-nil // to get OpenStatusUpdates. // // NOTE: This MUST be run as a goroutine. func (f *fundingManager) advanceFundingState(channel *channeldb.OpenChannel, pendingChanID [32]byte, updateChan chan<- *lnrpc.OpenStatusUpdate) { defer f.wg.Done() // If the channel is still pending we must wait for the funding // transaction to confirm. if channel.IsPending { err := f.advancePendingChannelState(channel, pendingChanID) if err != nil { fndgLog.Errorf("Unable to advance pending state of "+ "ChannelPoint(%v): %v", channel.FundingOutpoint, err) return } } // We create the state-machine object which wraps the database state. lnChannel, err := lnwallet.NewLightningChannel( nil, channel, nil, ) if err != nil { fndgLog.Errorf("Unable to create LightningChannel(%v): %v", channel.FundingOutpoint, err) return } for { channelState, shortChanID, err := f.getChannelOpeningState( &channel.FundingOutpoint, ) if err == ErrChannelNotFound { // Channel not in fundingManager's opening database, // meaning it was successfully announced to the // network. // TODO(halseth): could do graph consistency check // here, and re-add the edge if missing. fndgLog.Debugf("ChannelPoint(%v) with chan_id=%x not "+ "found in opening database, assuming already "+ "announced to the network", channel.FundingOutpoint, pendingChanID) return } else if err != nil { fndgLog.Errorf("Unable to query database for "+ "channel opening state(%v): %v", channel.FundingOutpoint, err) return } // If we did find the channel in the opening state database, we // have seen the funding transaction being confirmed, but there // are still steps left of the setup procedure. We continue the // procedure where we left off. err = f.stateStep( channel, lnChannel, shortChanID, pendingChanID, channelState, updateChan, ) if err != nil { fndgLog.Errorf("Unable to advance state(%v): %v", channel.FundingOutpoint, err) return } } } // stateStep advances the confirmed channel one step in the funding state // machine. This method is synchronous and the new channel opening state will // have been written to the database when it successfully returns. The // updateChan can be set non-nil to get OpenStatusUpdates. func (f *fundingManager) stateStep(channel *channeldb.OpenChannel, lnChannel *lnwallet.LightningChannel, shortChanID *lnwire.ShortChannelID, pendingChanID [32]byte, channelState channelOpeningState, updateChan chan<- *lnrpc.OpenStatusUpdate) error { chanID := lnwire.NewChanIDFromOutPoint(&channel.FundingOutpoint) fndgLog.Debugf("Channel(%v) with ShortChanID %v has opening state %v", chanID, shortChanID, channelState) switch channelState { // The funding transaction was confirmed, but we did not successfully // send the fundingLocked message to the peer, so let's do that now. case markedOpen: err := f.sendFundingLocked(channel, lnChannel, shortChanID) if err != nil { return fmt.Errorf("failed sending fundingLocked: %v", err) } // As the fundingLocked message is now sent to the peer, the // channel is moved to the next state of the state machine. It // will be moved to the last state (actually deleted from the // database) after the channel is finally announced. err = f.saveChannelOpeningState( &channel.FundingOutpoint, fundingLockedSent, shortChanID, ) if err != nil { return fmt.Errorf("error setting channel state to"+ " fundingLockedSent: %v", err) } fndgLog.Debugf("Channel(%v) with ShortChanID %v: successfully "+ "sent FundingLocked", chanID, shortChanID) return nil // fundingLocked was sent to peer, but the channel was not added to the // router graph and the channel announcement was not sent. case fundingLockedSent: err := f.addToRouterGraph(channel, shortChanID) if err != nil { return fmt.Errorf("failed adding to "+ "router graph: %v", err) } // As the channel is now added to the ChannelRouter's topology, // the channel is moved to the next state of the state machine. // It will be moved to the last state (actually deleted from // the database) after the channel is finally announced. err = f.saveChannelOpeningState( &channel.FundingOutpoint, addedToRouterGraph, shortChanID, ) if err != nil { return fmt.Errorf("error setting channel state to"+ " addedToRouterGraph: %v", err) } fndgLog.Debugf("Channel(%v) with ShortChanID %v: successfully "+ "added to router graph", chanID, shortChanID) // Give the caller a final update notifying them that // the channel is now open. // TODO(roasbeef): only notify after recv of funding locked? fundingPoint := channel.FundingOutpoint cp := &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: fundingPoint.Hash[:], }, OutputIndex: fundingPoint.Index, } if updateChan != nil { upd := &lnrpc.OpenStatusUpdate{ Update: &lnrpc.OpenStatusUpdate_ChanOpen{ ChanOpen: &lnrpc.ChannelOpenUpdate{ ChannelPoint: cp, }, }, PendingChanId: pendingChanID[:], } select { case updateChan <- upd: case <-f.quit: return ErrFundingManagerShuttingDown } } return nil // The channel was added to the Router's topology, but the channel // announcement was not sent. case addedToRouterGraph: err := f.annAfterSixConfs(channel, shortChanID) if err != nil { return fmt.Errorf("error sending channel "+ "announcement: %v", err) } // We delete the channel opening state from our internal // database as the opening process has succeeded. We can do // this because we assume the AuthenticatedGossiper queues the // announcement messages, and persists them in case of a daemon // shutdown. err = f.deleteChannelOpeningState(&channel.FundingOutpoint) if err != nil { return fmt.Errorf("error deleting channel state: %v", err) } fndgLog.Debugf("Channel(%v) with ShortChanID %v: successfully "+ "announced", chanID, shortChanID) return nil } return fmt.Errorf("undefined channelState: %v", channelState) } // advancePendingChannelState waits for a pending channel's funding tx to // confirm, and marks it open in the database when that happens. func (f *fundingManager) advancePendingChannelState( channel *channeldb.OpenChannel, pendingChanID [32]byte) error { confChannel, err := f.waitForFundingWithTimeout(channel) if err == ErrConfirmationTimeout { // We'll get a timeout if the number of blocks mined // since the channel was initiated reaches // maxWaitNumBlocksFundingConf and we are not the // channel initiator. ch := channel localBalance := ch.LocalCommitment.LocalBalance.ToSatoshis() closeInfo := &channeldb.ChannelCloseSummary{ ChainHash: ch.ChainHash, ChanPoint: ch.FundingOutpoint, RemotePub: ch.IdentityPub, Capacity: ch.Capacity, SettledBalance: localBalance, CloseType: channeldb.FundingCanceled, RemoteCurrentRevocation: ch.RemoteCurrentRevocation, RemoteNextRevocation: ch.RemoteNextRevocation, LocalChanConfig: ch.LocalChanCfg, } if err := ch.CloseChannel(closeInfo); err != nil { return fmt.Errorf("failed closing channel "+ "%v: %v", ch.FundingOutpoint, err) } timeoutErr := fmt.Errorf("timeout waiting for funding tx "+ "(%v) to confirm", channel.FundingOutpoint) // When the peer comes online, we'll notify it that we // are now considering the channel flow canceled. f.wg.Add(1) go func() { defer f.wg.Done() peerChan := make(chan lnpeer.Peer, 1) var peerKey [33]byte copy(peerKey[:], ch.IdentityPub.SerializeCompressed()) f.cfg.NotifyWhenOnline(peerKey, peerChan) var peer lnpeer.Peer select { case peer = <-peerChan: case <-f.quit: return } // TODO(halseth): should this send be made // reliable? f.failFundingFlow(peer, pendingChanID, timeoutErr) }() return timeoutErr } else if err != nil { return fmt.Errorf("error waiting for funding "+ "confirmation for ChannelPoint(%v): %v", channel.FundingOutpoint, err) } // Success, funding transaction was confirmed. chanID := lnwire.NewChanIDFromOutPoint(&channel.FundingOutpoint) fndgLog.Debugf("ChannelID(%v) is now fully confirmed! "+ "(shortChanID=%v)", chanID, confChannel.shortChanID) err = f.handleFundingConfirmation(channel, confChannel) if err != nil { return fmt.Errorf("unable to handle funding "+ "confirmation for ChannelPoint(%v): %v", channel.FundingOutpoint, err) } return nil } // handlePendingChannels responds to a request for details concerning all // currently pending channels waiting for the final phase of the funding // workflow (funding txn confirmation). func (f *fundingManager) handlePendingChannels(msg *pendingChansReq) { var pendingChannels []*pendingChannel dbPendingChannels, err := f.cfg.Wallet.Cfg.Database.FetchPendingChannels() if err != nil { msg.err <- err return } for _, dbPendingChan := range dbPendingChannels { pendingChan := &pendingChannel{ identityPub: dbPendingChan.IdentityPub, channelPoint: &dbPendingChan.FundingOutpoint, capacity: dbPendingChan.Capacity, localBalance: dbPendingChan.LocalCommitment.LocalBalance.ToSatoshis(), remoteBalance: dbPendingChan.LocalCommitment.RemoteBalance.ToSatoshis(), } pendingChannels = append(pendingChannels, pendingChan) } msg.resp <- pendingChannels } // processFundingOpen sends a message to the fundingManager allowing it to // initiate the new funding workflow with the source peer. func (f *fundingManager) processFundingOpen(msg *lnwire.OpenChannel, peer lnpeer.Peer) { select { case f.fundingMsgs <- &fundingOpenMsg{msg, peer}: case <-f.quit: return } } // handleFundingOpen creates an initial 'ChannelReservation' within the wallet, // then responds to the source peer with an accept channel message progressing // the funding workflow. // // TODO(roasbeef): add error chan to all, let channelManager handle // error+propagate func (f *fundingManager) handleFundingOpen(fmsg *fundingOpenMsg) { // Check number of pending channels to be smaller than maximum allowed // number and send ErrorGeneric to remote peer if condition is // violated. peerPubKey := fmsg.peer.IdentityKey() peerIDKey := newSerializedKey(peerPubKey) msg := fmsg.msg amt := msg.FundingAmount // We count the number of pending channels for this peer. This is the // sum of the active reservations and the channels pending open in the // database. f.resMtx.RLock() numPending := len(f.activeReservations[peerIDKey]) f.resMtx.RUnlock() channels, err := f.cfg.Wallet.Cfg.Database.FetchOpenChannels(peerPubKey) if err != nil { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, err, ) return } for _, c := range channels { if c.IsPending { numPending++ } } // TODO(roasbeef): modify to only accept a _single_ pending channel per // block unless white listed if numPending >= f.cfg.MaxPendingChannels { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, lnwire.ErrMaxPendingChannels, ) return } // We'll also reject any requests to create channels until we're fully // synced to the network as we won't be able to properly validate the // confirmation of the funding transaction. isSynced, _, err := f.cfg.Wallet.IsSynced() if err != nil || !isSynced { if err != nil { fndgLog.Errorf("unable to query wallet: %v", err) } f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, lnwire.ErrSynchronizingChain, ) return } // We'll reject any request to create a channel that's above the // current soft-limit for channel size. if msg.FundingAmount > MaxFundingAmount { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, lnwire.ErrChanTooLarge, ) return } // We'll, also ensure that the remote party isn't attempting to propose // a channel that's below our current min channel size. if amt < f.cfg.MinChanSize { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, lnwallet.ErrChanTooSmall(amt, btcutil.Amount(f.cfg.MinChanSize)), ) return } // If request specifies non-zero push amount and 'rejectpush' is set, // signal an error. if f.cfg.RejectPush && msg.PushAmount > 0 { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, lnwallet.ErrNonZeroPushAmount(), ) return } // Send the OpenChannel request to the ChannelAcceptor to determine whether // this node will accept the channel. chanReq := &chanacceptor.ChannelAcceptRequest{ Node: fmsg.peer.IdentityKey(), OpenChanMsg: fmsg.msg, } if !f.cfg.OpenChannelPredicate.Accept(chanReq) { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, fmt.Errorf("open channel request rejected"), ) return } fndgLog.Infof("Recv'd fundingRequest(amt=%v, push=%v, delay=%v, "+ "pendingId=%x) from peer(%x)", amt, msg.PushAmount, msg.CsvDelay, msg.PendingChannelID, fmsg.peer.IdentityKey().SerializeCompressed()) // Attempt to initialize a reservation within the wallet. If the wallet // has insufficient resources to create the channel, then the // reservation attempt may be rejected. Note that since we're on the // responding side of a single funder workflow, we don't commit any // funds to the channel ourselves. // // Before we init the channel, we'll also check to see if we've // negotiated the new tweakless commitment format. This is only the // case if *both* us and the remote peer are signaling the proper // feature bit. localTweakless := fmsg.peer.LocalFeatures().HasFeature( lnwire.StaticRemoteKeyOptional, ) remoteTweakless := fmsg.peer.RemoteFeatures().HasFeature( lnwire.StaticRemoteKeyOptional, ) tweaklessCommitment := localTweakless && remoteTweakless chainHash := chainhash.Hash(msg.ChainHash) req := &lnwallet.InitFundingReserveMsg{ ChainHash: &chainHash, PendingChanID: msg.PendingChannelID, NodeID: fmsg.peer.IdentityKey(), NodeAddr: fmsg.peer.Address(), LocalFundingAmt: 0, RemoteFundingAmt: amt, CommitFeePerKw: chainfee.SatPerKWeight(msg.FeePerKiloWeight), FundingFeePerKw: 0, PushMSat: msg.PushAmount, Flags: msg.ChannelFlags, MinConfs: 1, Tweakless: tweaklessCommitment, } reservation, err := f.cfg.Wallet.InitChannelReservation(req) if err != nil { fndgLog.Errorf("Unable to initialize reservation: %v", err) f.failFundingFlow(fmsg.peer, msg.PendingChannelID, err) return } // As we're the responder, we get to specify the number of confirmations // that we require before both of us consider the channel open. We'll // use our mapping to derive the proper number of confirmations based on // the amount of the channel, and also if any funds are being pushed to // us. numConfsReq := f.cfg.NumRequiredConfs(msg.FundingAmount, msg.PushAmount) reservation.SetNumConfsRequired(numConfsReq) // We'll also validate and apply all the constraints the initiating // party is attempting to dictate for our commitment transaction. channelConstraints := &channeldb.ChannelConstraints{ DustLimit: msg.DustLimit, ChanReserve: msg.ChannelReserve, MaxPendingAmount: msg.MaxValueInFlight, MinHTLC: msg.HtlcMinimum, MaxAcceptedHtlcs: msg.MaxAcceptedHTLCs, CsvDelay: msg.CsvDelay, } err = reservation.CommitConstraints(channelConstraints) if err != nil { fndgLog.Errorf("Unacceptable channel constraints: %v", err) f.failFundingFlow(fmsg.peer, fmsg.msg.PendingChannelID, err) return } // Check whether the peer supports upfront shutdown, and get a new wallet // address if our node is configured to set shutdown addresses by default. // A nil address is set in place of user input, because this channel open // was not initiated by the user. shutdown, err := getUpfrontShutdownScript( fmsg.peer, nil, func() (lnwire.DeliveryAddress, error) { addr, err := f.cfg.Wallet.NewAddress(lnwallet.WitnessPubKey, false) if err != nil { return nil, err } return txscript.PayToAddrScript(addr) }, ) if err != nil { f.failFundingFlow( fmsg.peer, fmsg.msg.PendingChannelID, fmt.Errorf("getUpfrontShutdownScript error: %v", err), ) return } reservation.SetOurUpfrontShutdown(shutdown) fndgLog.Infof("Requiring %v confirmations for pendingChan(%x): "+ "amt=%v, push_amt=%v, tweakless=%v, upfrontShutdown=%x", numConfsReq, fmsg.msg.PendingChannelID, amt, msg.PushAmount, tweaklessCommitment, msg.UpfrontShutdownScript) // Generate our required constraints for the remote party. remoteCsvDelay := f.cfg.RequiredRemoteDelay(amt) chanReserve := f.cfg.RequiredRemoteChanReserve(amt, msg.DustLimit) maxValue := f.cfg.RequiredRemoteMaxValue(amt) maxHtlcs := f.cfg.RequiredRemoteMaxHTLCs(amt) minHtlc := f.cfg.DefaultMinHtlcIn // Once the reservation has been created successfully, we add it to // this peer's map of pending reservations to track this particular // reservation until either abort or completion. f.resMtx.Lock() if _, ok := f.activeReservations[peerIDKey]; !ok { f.activeReservations[peerIDKey] = make(pendingChannels) } resCtx := &reservationWithCtx{ reservation: reservation, chanAmt: amt, remoteCsvDelay: remoteCsvDelay, remoteMinHtlc: minHtlc, err: make(chan error, 1), peer: fmsg.peer, } f.activeReservations[peerIDKey][msg.PendingChannelID] = resCtx f.resMtx.Unlock() // Update the timestamp once the fundingOpenMsg has been handled. defer resCtx.updateTimestamp() // With our parameters set, we'll now process their contribution so we // can move the funding workflow ahead. remoteContribution := &lnwallet.ChannelContribution{ FundingAmount: amt, FirstCommitmentPoint: msg.FirstCommitmentPoint, ChannelConfig: &channeldb.ChannelConfig{ ChannelConstraints: channeldb.ChannelConstraints{ DustLimit: msg.DustLimit, MaxPendingAmount: maxValue, ChanReserve: chanReserve, MinHTLC: minHtlc, MaxAcceptedHtlcs: maxHtlcs, CsvDelay: remoteCsvDelay, }, MultiSigKey: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.FundingKey), }, RevocationBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.RevocationPoint), }, PaymentBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.PaymentPoint), }, DelayBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.DelayedPaymentPoint), }, HtlcBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.HtlcPoint), }, }, UpfrontShutdown: msg.UpfrontShutdownScript, } err = reservation.ProcessSingleContribution(remoteContribution) if err != nil { fndgLog.Errorf("unable to add contribution reservation: %v", err) f.failFundingFlow(fmsg.peer, msg.PendingChannelID, err) return } fndgLog.Infof("Sending fundingResp for pending_id(%x)", msg.PendingChannelID) fndgLog.Debugf("Remote party accepted commitment constraints: %v", spew.Sdump(remoteContribution.ChannelConfig.ChannelConstraints)) // With the initiator's contribution recorded, respond with our // contribution in the next message of the workflow. ourContribution := reservation.OurContribution() fundingAccept := lnwire.AcceptChannel{ PendingChannelID: msg.PendingChannelID, DustLimit: ourContribution.DustLimit, MaxValueInFlight: maxValue, ChannelReserve: chanReserve, MinAcceptDepth: uint32(numConfsReq), HtlcMinimum: minHtlc, CsvDelay: remoteCsvDelay, MaxAcceptedHTLCs: maxHtlcs, FundingKey: ourContribution.MultiSigKey.PubKey, RevocationPoint: ourContribution.RevocationBasePoint.PubKey, PaymentPoint: ourContribution.PaymentBasePoint.PubKey, DelayedPaymentPoint: ourContribution.DelayBasePoint.PubKey, HtlcPoint: ourContribution.HtlcBasePoint.PubKey, FirstCommitmentPoint: ourContribution.FirstCommitmentPoint, UpfrontShutdownScript: ourContribution.UpfrontShutdown, } if err := fmsg.peer.SendMessage(true, &fundingAccept); err != nil { fndgLog.Errorf("unable to send funding response to peer: %v", err) f.failFundingFlow(fmsg.peer, msg.PendingChannelID, err) return } } // processFundingAccept sends a message to the fundingManager allowing it to // continue the second phase of a funding workflow with the target peer. func (f *fundingManager) processFundingAccept(msg *lnwire.AcceptChannel, peer lnpeer.Peer) { select { case f.fundingMsgs <- &fundingAcceptMsg{msg, peer}: case <-f.quit: return } } // handleFundingAccept processes a response to the workflow initiation sent by // the remote peer. This message then queues a message with the funding // outpoint, and a commitment signature to the remote peer. func (f *fundingManager) handleFundingAccept(fmsg *fundingAcceptMsg) { msg := fmsg.msg pendingChanID := fmsg.msg.PendingChannelID peerKey := fmsg.peer.IdentityKey() resCtx, err := f.getReservationCtx(peerKey, pendingChanID) if err != nil { fndgLog.Warnf("Can't find reservation (peerKey:%v, chan_id:%v)", peerKey, pendingChanID) return } // Update the timestamp once the fundingAcceptMsg has been handled. defer resCtx.updateTimestamp() fndgLog.Infof("Recv'd fundingResponse for pending_id(%x)", pendingChanID[:]) // The required number of confirmations should not be greater than the // maximum number of confirmations required by the ChainNotifier to // properly dispatch confirmations. if msg.MinAcceptDepth > chainntnfs.MaxNumConfs { err := lnwallet.ErrNumConfsTooLarge( msg.MinAcceptDepth, chainntnfs.MaxNumConfs, ) fndgLog.Warnf("Unacceptable channel constraints: %v", err) f.failFundingFlow(fmsg.peer, fmsg.msg.PendingChannelID, err) return } // We'll also specify the responder's preference for the number of // required confirmations, and also the set of channel constraints // they've specified for commitment states we can create. resCtx.reservation.SetNumConfsRequired(uint16(msg.MinAcceptDepth)) channelConstraints := &channeldb.ChannelConstraints{ DustLimit: msg.DustLimit, ChanReserve: msg.ChannelReserve, MaxPendingAmount: msg.MaxValueInFlight, MinHTLC: msg.HtlcMinimum, MaxAcceptedHtlcs: msg.MaxAcceptedHTLCs, CsvDelay: msg.CsvDelay, } err = resCtx.reservation.CommitConstraints(channelConstraints) if err != nil { fndgLog.Warnf("Unacceptable channel constraints: %v", err) f.failFundingFlow(fmsg.peer, fmsg.msg.PendingChannelID, err) return } // As they've accepted our channel constraints, we'll regenerate them // here so we can properly commit their accepted constraints to the // reservation. chanReserve := f.cfg.RequiredRemoteChanReserve(resCtx.chanAmt, msg.DustLimit) maxValue := f.cfg.RequiredRemoteMaxValue(resCtx.chanAmt) maxHtlcs := f.cfg.RequiredRemoteMaxHTLCs(resCtx.chanAmt) // The remote node has responded with their portion of the channel // contribution. At this point, we can process their contribution which // allows us to construct and sign both the commitment transaction, and // the funding transaction. remoteContribution := &lnwallet.ChannelContribution{ FirstCommitmentPoint: msg.FirstCommitmentPoint, ChannelConfig: &channeldb.ChannelConfig{ ChannelConstraints: channeldb.ChannelConstraints{ DustLimit: msg.DustLimit, MaxPendingAmount: maxValue, ChanReserve: chanReserve, MinHTLC: resCtx.remoteMinHtlc, MaxAcceptedHtlcs: maxHtlcs, CsvDelay: resCtx.remoteCsvDelay, }, MultiSigKey: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.FundingKey), }, RevocationBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.RevocationPoint), }, PaymentBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.PaymentPoint), }, DelayBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.DelayedPaymentPoint), }, HtlcBasePoint: keychain.KeyDescriptor{ PubKey: copyPubKey(msg.HtlcPoint), }, }, UpfrontShutdown: msg.UpfrontShutdownScript, } err = resCtx.reservation.ProcessContribution(remoteContribution) if err != nil { fndgLog.Errorf("Unable to process contribution from %v: %v", peerKey, err) f.failFundingFlow(fmsg.peer, msg.PendingChannelID, err) return } fndgLog.Infof("pendingChan(%x): remote party proposes num_confs=%v, "+ "csv_delay=%v", pendingChanID[:], msg.MinAcceptDepth, msg.CsvDelay) fndgLog.Debugf("Remote party accepted commitment constraints: %v", spew.Sdump(remoteContribution.ChannelConfig.ChannelConstraints)) // Now that we have their contribution, we can extract, then send over // both the funding out point and our signature for their version of // the commitment transaction to the remote peer. outPoint := resCtx.reservation.FundingOutpoint() _, sig := resCtx.reservation.OurSignatures() // A new channel has almost finished the funding process. In order to // properly synchronize with the writeHandler goroutine, we add a new // channel to the barriers map which will be closed once the channel is // fully open. f.barrierMtx.Lock() channelID := lnwire.NewChanIDFromOutPoint(outPoint) fndgLog.Debugf("Creating chan barrier for ChanID(%v)", channelID) f.newChanBarriers[channelID] = make(chan struct{}) f.barrierMtx.Unlock() // The next message that advances the funding flow will reference the // channel via its permanent channel ID, so we'll set up this mapping // so we can retrieve the reservation context once we get the // FundingSigned message. f.resMtx.Lock() f.signedReservations[channelID] = pendingChanID f.resMtx.Unlock() fndgLog.Infof("Generated ChannelPoint(%v) for pending_id(%x)", outPoint, pendingChanID[:]) fundingCreated := &lnwire.FundingCreated{ PendingChannelID: pendingChanID, FundingPoint: *outPoint, } fundingCreated.CommitSig, err = lnwire.NewSigFromRawSignature(sig) if err != nil { fndgLog.Errorf("Unable to parse signature: %v", err) f.failFundingFlow(fmsg.peer, msg.PendingChannelID, err) return } if err := fmsg.peer.SendMessage(true, fundingCreated); err != nil { fndgLog.Errorf("Unable to send funding complete message: %v", err) f.failFundingFlow(fmsg.peer, msg.PendingChannelID, err) return } } // processFundingCreated queues a funding complete message coupled with the // source peer to the fundingManager. func (f *fundingManager) processFundingCreated(msg *lnwire.FundingCreated, peer lnpeer.Peer) { select { case f.fundingMsgs <- &fundingCreatedMsg{msg, peer}: case <-f.quit: return } } // handleFundingCreated progresses the funding workflow when the daemon is on // the responding side of a single funder workflow. Once this message has been // processed, a signature is sent to the remote peer allowing it to broadcast // the funding transaction, progressing the workflow into the final stage. func (f *fundingManager) handleFundingCreated(fmsg *fundingCreatedMsg) { peerKey := fmsg.peer.IdentityKey() pendingChanID := fmsg.msg.PendingChannelID resCtx, err := f.getReservationCtx(peerKey, pendingChanID) if err != nil { fndgLog.Warnf("can't find reservation (peer_id:%v, chan_id:%x)", peerKey, pendingChanID[:]) return } // The channel initiator has responded with the funding outpoint of the // final funding transaction, as well as a signature for our version of // the commitment transaction. So at this point, we can validate the // initiator's commitment transaction, then send our own if it's valid. // TODO(roasbeef): make case (p vs P) consistent throughout fundingOut := fmsg.msg.FundingPoint fndgLog.Infof("completing pending_id(%x) with ChannelPoint(%v)", pendingChanID[:], fundingOut) // With all the necessary data available, attempt to advance the // funding workflow to the next stage. If this succeeds then the // funding transaction will broadcast after our next message. // CompleteReservationSingle will also mark the channel as 'IsPending' // in the database. commitSig := fmsg.msg.CommitSig.ToSignatureBytes() completeChan, err := resCtx.reservation.CompleteReservationSingle( &fundingOut, commitSig) if err != nil { // TODO(roasbeef): better error logging: peerID, channelID, etc. fndgLog.Errorf("unable to complete single reservation: %v", err) f.failFundingFlow(fmsg.peer, pendingChanID, err) return } // The channel is marked IsPending in the database, and can be removed // from the set of active reservations. f.deleteReservationCtx(peerKey, fmsg.msg.PendingChannelID) // If something goes wrong before the funding transaction is confirmed, // we use this convenience method to delete the pending OpenChannel // from the database. deleteFromDatabase := func() { localBalance := completeChan.LocalCommitment.LocalBalance.ToSatoshis() closeInfo := &channeldb.ChannelCloseSummary{ ChanPoint: completeChan.FundingOutpoint, ChainHash: completeChan.ChainHash, RemotePub: completeChan.IdentityPub, CloseType: channeldb.FundingCanceled, Capacity: completeChan.Capacity, SettledBalance: localBalance, RemoteCurrentRevocation: completeChan.RemoteCurrentRevocation, RemoteNextRevocation: completeChan.RemoteNextRevocation, LocalChanConfig: completeChan.LocalChanCfg, } if err := completeChan.CloseChannel(closeInfo); err != nil { fndgLog.Errorf("Failed closing channel %v: %v", completeChan.FundingOutpoint, err) } } // A new channel has almost finished the funding process. In order to // properly synchronize with the writeHandler goroutine, we add a new // channel to the barriers map which will be closed once the channel is // fully open. f.barrierMtx.Lock() channelID := lnwire.NewChanIDFromOutPoint(&fundingOut) fndgLog.Debugf("Creating chan barrier for ChanID(%v)", channelID) f.newChanBarriers[channelID] = make(chan struct{}) f.barrierMtx.Unlock() fndgLog.Infof("sending FundingSigned for pending_id(%x) over "+ "ChannelPoint(%v)", pendingChanID[:], fundingOut) // With their signature for our version of the commitment transaction // verified, we can now send over our signature to the remote peer. _, sig := resCtx.reservation.OurSignatures() ourCommitSig, err := lnwire.NewSigFromRawSignature(sig) if err != nil { fndgLog.Errorf("unable to parse signature: %v", err) f.failFundingFlow(fmsg.peer, pendingChanID, err) deleteFromDatabase() return } fundingSigned := &lnwire.FundingSigned{ ChanID: channelID, CommitSig: ourCommitSig, } if err := fmsg.peer.SendMessage(true, fundingSigned); err != nil { fndgLog.Errorf("unable to send FundingSigned message: %v", err) f.failFundingFlow(fmsg.peer, pendingChanID, err) deleteFromDatabase() return } // Now that we've sent over our final signature for this channel, we'll // send it to the ChainArbitrator so it can watch for any on-chain // actions during this final confirmation stage. if err := f.cfg.WatchNewChannel(completeChan, peerKey); err != nil { fndgLog.Errorf("Unable to send new ChannelPoint(%v) for "+ "arbitration: %v", fundingOut, err) } // Create an entry in the local discovery map so we can ensure that we // process the channel confirmation fully before we receive a funding // locked message. f.localDiscoveryMtx.Lock() f.localDiscoverySignals[channelID] = make(chan struct{}) f.localDiscoveryMtx.Unlock() // Inform the ChannelNotifier that the channel has entered // pending open state. f.cfg.NotifyPendingOpenChannelEvent(fundingOut) // At this point we have sent our last funding message to the // initiating peer before the funding transaction will be broadcast. // With this last message, our job as the responder is now complete. // We'll wait for the funding transaction to reach the specified number // of confirmations, then start normal operations. // // When we get to this point we have sent the signComplete message to // the channel funder, and BOLT#2 specifies that we MUST remember the // channel for reconnection. The channel is already marked // as pending in the database, so in case of a disconnect or restart, // we will continue waiting for the confirmation the next time we start // the funding manager. In case the funding transaction never appears // on the blockchain, we must forget this channel. We therefore // completely forget about this channel if we haven't seen the funding // transaction in 288 blocks (~ 48 hrs), by canceling the reservation // and canceling the wait for the funding confirmation. f.wg.Add(1) go f.advanceFundingState(completeChan, pendingChanID, nil) } // processFundingSigned sends a single funding sign complete message along with // the source peer to the funding manager. func (f *fundingManager) processFundingSigned(msg *lnwire.FundingSigned, peer lnpeer.Peer) { select { case f.fundingMsgs <- &fundingSignedMsg{msg, peer}: case <-f.quit: return } } // handleFundingSigned processes the final message received in a single funder // workflow. Once this message is processed, the funding transaction is // broadcast. Once the funding transaction reaches a sufficient number of // confirmations, a message is sent to the responding peer along with a compact // encoding of the location of the channel within the blockchain. func (f *fundingManager) handleFundingSigned(fmsg *fundingSignedMsg) { // As the funding signed message will reference the reservation by its // permanent channel ID, we'll need to perform an intermediate look up // before we can obtain the reservation. f.resMtx.Lock() pendingChanID, ok := f.signedReservations[fmsg.msg.ChanID] delete(f.signedReservations, fmsg.msg.ChanID) f.resMtx.Unlock() if !ok { err := fmt.Errorf("Unable to find signed reservation for "+ "chan_id=%x", fmsg.msg.ChanID) fndgLog.Warnf(err.Error()) f.failFundingFlow(fmsg.peer, fmsg.msg.ChanID, err) return } peerKey := fmsg.peer.IdentityKey() resCtx, err := f.getReservationCtx(peerKey, pendingChanID) if err != nil { fndgLog.Warnf("Unable to find reservation (peer_id:%v, "+ "chan_id:%x)", peerKey, pendingChanID[:]) // TODO: add ErrChanNotFound? f.failFundingFlow(fmsg.peer, pendingChanID, err) return } // Create an entry in the local discovery map so we can ensure that we // process the channel confirmation fully before we receive a funding // locked message. fundingPoint := resCtx.reservation.FundingOutpoint() permChanID := lnwire.NewChanIDFromOutPoint(fundingPoint) f.localDiscoveryMtx.Lock() f.localDiscoverySignals[permChanID] = make(chan struct{}) f.localDiscoveryMtx.Unlock() // The remote peer has responded with a signature for our commitment // transaction. We'll verify the signature for validity, then commit // the state to disk as we can now open the channel. commitSig := fmsg.msg.CommitSig.ToSignatureBytes() completeChan, err := resCtx.reservation.CompleteReservation( nil, commitSig, ) if err != nil { fndgLog.Errorf("Unable to complete reservation sign "+ "complete: %v", err) f.failFundingFlow(fmsg.peer, pendingChanID, err) return } // The channel is now marked IsPending in the database, and we can // delete it from our set of active reservations. f.deleteReservationCtx(peerKey, pendingChanID) // Broadcast the finalized funding transaction to the network, but only // if we actually have the funding transaction. if completeChan.ChanType.HasFundingTx() { fundingTx := completeChan.FundingTxn fndgLog.Infof("Broadcasting funding tx for ChannelPoint(%v): %v", completeChan.FundingOutpoint, spew.Sdump(fundingTx)) err = f.cfg.PublishTransaction(fundingTx) if err != nil { fndgLog.Errorf("Unable to broadcast funding tx for "+ "ChannelPoint(%v): %v", completeChan.FundingOutpoint, err) // We failed to broadcast the funding transaction, but // watch the channel regardless, in case the // transaction made it to the network. We will retry // broadcast at startup. // // TODO(halseth): retry more often? Handle with CPFP? // Just delete from the DB? } } // Now that we have a finalized reservation for this funding flow, // we'll send the to be active channel to the ChainArbitrator so it can // watch for any on-chain actions before the channel has fully // confirmed. if err := f.cfg.WatchNewChannel(completeChan, peerKey); err != nil { fndgLog.Errorf("Unable to send new ChannelPoint(%v) for "+ "arbitration: %v", fundingPoint, err) } fndgLog.Infof("Finalizing pending_id(%x) over ChannelPoint(%v), "+ "waiting for channel open on-chain", pendingChanID[:], fundingPoint) // Send an update to the upstream client that the negotiation process // is over. // // TODO(roasbeef): add abstraction over updates to accommodate // long-polling, or SSE, etc. upd := &lnrpc.OpenStatusUpdate{ Update: &lnrpc.OpenStatusUpdate_ChanPending{ ChanPending: &lnrpc.PendingUpdate{ Txid: fundingPoint.Hash[:], OutputIndex: fundingPoint.Index, }, }, PendingChanId: pendingChanID[:], } select { case resCtx.updates <- upd: // Inform the ChannelNotifier that the channel has entered // pending open state. f.cfg.NotifyPendingOpenChannelEvent(*fundingPoint) case <-f.quit: return } // At this point we have broadcast the funding transaction and done all // necessary processing. f.wg.Add(1) go f.advanceFundingState(completeChan, pendingChanID, resCtx.updates) } // confirmedChannel wraps a confirmed funding transaction, as well as the short // channel ID which identifies that channel into a single struct. We'll use // this to pass around the final state of a channel after it has been // confirmed. type confirmedChannel struct { // shortChanID expresses where in the block the funding transaction was // located. shortChanID lnwire.ShortChannelID // fundingTx is the funding transaction that created the channel. fundingTx *wire.MsgTx } // waitForFundingWithTimeout is a wrapper around waitForFundingConfirmation and // waitForTimeout that will return ErrConfirmationTimeout if we are not the // channel initiator and the maxWaitNumBlocksFundingConf has passed from the // funding broadcast height. In case of confirmation, the short channel ID of // the channel and the funding transaction will be returned. func (f *fundingManager) waitForFundingWithTimeout( ch *channeldb.OpenChannel) (*confirmedChannel, error) { confChan := make(chan *confirmedChannel) timeoutChan := make(chan error, 1) cancelChan := make(chan struct{}) f.wg.Add(1) go f.waitForFundingConfirmation(ch, cancelChan, confChan) // If we are not the initiator, we have no money at stake and will // timeout waiting for the funding transaction to confirm after a // while. if !ch.IsInitiator { f.wg.Add(1) go f.waitForTimeout(ch, cancelChan, timeoutChan) } defer close(cancelChan) select { case err := <-timeoutChan: if err != nil { return nil, err } return nil, ErrConfirmationTimeout case <-f.quit: // The fundingManager is shutting down, and will resume wait on // startup. return nil, ErrFundingManagerShuttingDown case confirmedChannel, ok := <-confChan: if !ok { return nil, fmt.Errorf("waiting for funding" + "confirmation failed") } return confirmedChannel, nil } } // makeFundingScript re-creates the funding script for the funding transaction // of the target channel. func makeFundingScript(channel *channeldb.OpenChannel) ([]byte, error) { localKey := channel.LocalChanCfg.MultiSigKey.PubKey.SerializeCompressed() remoteKey := channel.RemoteChanCfg.MultiSigKey.PubKey.SerializeCompressed() multiSigScript, err := input.GenMultiSigScript(localKey, remoteKey) if err != nil { return nil, err } return input.WitnessScriptHash(multiSigScript) } // waitForFundingConfirmation handles the final stages of the channel funding // process once the funding transaction has been broadcast. The primary // function of waitForFundingConfirmation is to wait for blockchain // confirmation, and then to notify the other systems that must be notified // when a channel has become active for lightning transactions. // The wait can be canceled by closing the cancelChan. In case of success, // a *lnwire.ShortChannelID will be passed to confChan. // // NOTE: This MUST be run as a goroutine. func (f *fundingManager) waitForFundingConfirmation( completeChan *channeldb.OpenChannel, cancelChan <-chan struct{}, confChan chan<- *confirmedChannel) { defer f.wg.Done() defer close(confChan) // Register with the ChainNotifier for a notification once the funding // transaction reaches `numConfs` confirmations. txid := completeChan.FundingOutpoint.Hash fundingScript, err := makeFundingScript(completeChan) if err != nil { fndgLog.Errorf("unable to create funding script for "+ "ChannelPoint(%v): %v", completeChan.FundingOutpoint, err) return } numConfs := uint32(completeChan.NumConfsRequired) confNtfn, err := f.cfg.Notifier.RegisterConfirmationsNtfn( &txid, fundingScript, numConfs, completeChan.FundingBroadcastHeight, ) if err != nil { fndgLog.Errorf("Unable to register for confirmation of "+ "ChannelPoint(%v): %v", completeChan.FundingOutpoint, err) return } fndgLog.Infof("Waiting for funding tx (%v) to reach %v confirmations", txid, numConfs) var confDetails *chainntnfs.TxConfirmation var ok bool // Wait until the specified number of confirmations has been reached, // we get a cancel signal, or the wallet signals a shutdown. select { case confDetails, ok = <-confNtfn.Confirmed: // fallthrough case <-cancelChan: fndgLog.Warnf("canceled waiting for funding confirmation, "+ "stopping funding flow for ChannelPoint(%v)", completeChan.FundingOutpoint) return case <-f.quit: fndgLog.Warnf("fundingManager shutting down, stopping funding "+ "flow for ChannelPoint(%v)", completeChan.FundingOutpoint) return } if !ok { fndgLog.Warnf("ChainNotifier shutting down, cannot complete "+ "funding flow for ChannelPoint(%v)", completeChan.FundingOutpoint) return } fundingPoint := completeChan.FundingOutpoint fndgLog.Infof("ChannelPoint(%v) is now active: ChannelID(%v)", fundingPoint, lnwire.NewChanIDFromOutPoint(&fundingPoint)) // With the block height and the transaction index known, we can // construct the compact chanID which is used on the network to unique // identify channels. shortChanID := lnwire.ShortChannelID{ BlockHeight: confDetails.BlockHeight, TxIndex: confDetails.TxIndex, TxPosition: uint16(fundingPoint.Index), } select { case confChan <- &confirmedChannel{ shortChanID: shortChanID, fundingTx: confDetails.Tx, }: case <-f.quit: return } } // waitForTimeout will close the timeout channel if maxWaitNumBlocksFundingConf // has passed from the broadcast height of the given channel. In case of error, // the error is sent on timeoutChan. The wait can be canceled by closing the // cancelChan. // // NOTE: timeoutChan MUST be buffered. // NOTE: This MUST be run as a goroutine. func (f *fundingManager) waitForTimeout(completeChan *channeldb.OpenChannel, cancelChan <-chan struct{}, timeoutChan chan<- error) { defer f.wg.Done() epochClient, err := f.cfg.Notifier.RegisterBlockEpochNtfn(nil) if err != nil { timeoutChan <- fmt.Errorf("unable to register for epoch "+ "notification: %v", err) return } defer epochClient.Cancel() // On block maxHeight we will cancel the funding confirmation wait. maxHeight := completeChan.FundingBroadcastHeight + maxWaitNumBlocksFundingConf for { select { case epoch, ok := <-epochClient.Epochs: if !ok { timeoutChan <- fmt.Errorf("epoch client " + "shutting down") return } // Close the timeout channel and exit if the block is // aboce the max height. if uint32(epoch.Height) >= maxHeight { fndgLog.Warnf("Waited for %v blocks without "+ "seeing funding transaction confirmed,"+ " cancelling.", maxWaitNumBlocksFundingConf) // Notify the caller of the timeout. close(timeoutChan) return } // TODO: If we are the channel initiator implement // a method for recovering the funds from the funding // transaction case <-cancelChan: return case <-f.quit: // The fundingManager is shutting down, will resume // waiting for the funding transaction on startup. return } } } // handleFundingConfirmation marks a channel as open in the database, and set // the channelOpeningState markedOpen. In addition it will report the now // decided short channel ID to the switch, and close the local discovery signal // for this channel. func (f *fundingManager) handleFundingConfirmation( completeChan *channeldb.OpenChannel, confChannel *confirmedChannel) error { fundingPoint := completeChan.FundingOutpoint chanID := lnwire.NewChanIDFromOutPoint(&fundingPoint) // TODO(roasbeef): ideally persistent state update for chan above // should be abstracted // Now that that the channel has been fully confirmed, we'll request // that the wallet fully verify this channel to ensure that it can be // used. err := f.cfg.Wallet.ValidateChannel(completeChan, confChannel.fundingTx) if err != nil { // TODO(roasbeef): delete chan state? return fmt.Errorf("unable to validate channel: %v", err) } // The funding transaction now being confirmed, we add this channel to // the fundingManager's internal persistent state machine that we use // to track the remaining process of the channel opening. This is // useful to resume the opening process in case of restarts. We set the // opening state before we mark the channel opened in the database, // such that we can receover from one of the db writes failing. err = f.saveChannelOpeningState( &fundingPoint, markedOpen, &confChannel.shortChanID, ) if err != nil { return fmt.Errorf("error setting channel state to markedOpen: %v", err) } // Now that the channel has been fully confirmed and we successfully // saved the opening state, we'll mark it as open within the database. err = completeChan.MarkAsOpen(confChannel.shortChanID) if err != nil { return fmt.Errorf("error setting channel pending flag to false: "+ "%v", err) } // Inform the ChannelNotifier that the channel has transitioned from // pending open to open. f.cfg.NotifyOpenChannelEvent(completeChan.FundingOutpoint) // As there might already be an active link in the switch with an // outdated short chan ID, we'll instruct the switch to load the updated // short chan id from disk. err = f.cfg.ReportShortChanID(fundingPoint) if err != nil { fndgLog.Errorf("unable to report short chan id: %v", err) } // Close the discoverySignal channel, indicating to a separate // goroutine that the channel now is marked as open in the database // and that it is acceptable to process funding locked messages // from the peer. f.localDiscoveryMtx.Lock() if discoverySignal, ok := f.localDiscoverySignals[chanID]; ok { close(discoverySignal) } f.localDiscoveryMtx.Unlock() return nil } // sendFundingLocked creates and sends the fundingLocked message. // This should be called after the funding transaction has been confirmed, // and the channelState is 'markedOpen'. func (f *fundingManager) sendFundingLocked( completeChan *channeldb.OpenChannel, channel *lnwallet.LightningChannel, shortChanID *lnwire.ShortChannelID) error { chanID := lnwire.NewChanIDFromOutPoint(&completeChan.FundingOutpoint) var peerKey [33]byte copy(peerKey[:], completeChan.IdentityPub.SerializeCompressed()) // Next, we'll send over the funding locked message which marks that we // consider the channel open by presenting the remote party with our // next revocation key. Without the revocation key, the remote party // will be unable to propose state transitions. nextRevocation, err := channel.NextRevocationKey() if err != nil { return fmt.Errorf("unable to create next revocation: %v", err) } fundingLockedMsg := lnwire.NewFundingLocked(chanID, nextRevocation) // If the peer has disconnected before we reach this point, we will need // to wait for him to come back online before sending the fundingLocked // message. This is special for fundingLocked, since failing to send any // of the previous messages in the funding flow just cancels the flow. // But now the funding transaction is confirmed, the channel is open // and we have to make sure the peer gets the fundingLocked message when // it comes back online. This is also crucial during restart of lnd, // where we might try to resend the fundingLocked message before the // server has had the time to connect to the peer. We keep trying to // send fundingLocked until we succeed, or the fundingManager is shut // down. for { connected := make(chan lnpeer.Peer, 1) f.cfg.NotifyWhenOnline(peerKey, connected) var peer lnpeer.Peer select { case peer = <-connected: case <-f.quit: return ErrFundingManagerShuttingDown } fndgLog.Infof("Peer(%x) is online, sending FundingLocked "+ "for ChannelID(%v)", peerKey, chanID) if err := peer.SendMessage(true, fundingLockedMsg); err == nil { // Sending succeeded, we can break out and continue the // funding flow. break } fndgLog.Warnf("Unable to send fundingLocked to peer %x: %v. "+ "Will retry when online", peerKey, err) } return nil } // addToRouterGraph sends a ChannelAnnouncement and a ChannelUpdate to the // gossiper so that the channel is added to the Router's internal graph. // These announcement messages are NOT broadcasted to the greater network, // only to the channel counter party. The proofs required to announce the // channel to the greater network will be created and sent in annAfterSixConfs. func (f *fundingManager) addToRouterGraph(completeChan *channeldb.OpenChannel, shortChanID *lnwire.ShortChannelID) error { chanID := lnwire.NewChanIDFromOutPoint(&completeChan.FundingOutpoint) // We'll obtain the min HTLC value we can forward in our direction, as // we'll use this value within our ChannelUpdate. This constraint is // originally set by the remote node, as it will be the one that will // need to determine the smallest HTLC it deems economically relevant. fwdMinHTLC := completeChan.LocalChanCfg.MinHTLC // We don't necessarily want to go as low as the remote party // allows. Check it against our default forwarding policy. if fwdMinHTLC < f.cfg.DefaultRoutingPolicy.MinHTLCOut { fwdMinHTLC = f.cfg.DefaultRoutingPolicy.MinHTLCOut } // We'll obtain the max HTLC value we can forward in our direction, as // we'll use this value within our ChannelUpdate. This value must be <= // channel capacity and <= the maximum in-flight msats set by the peer. fwdMaxHTLC := completeChan.LocalChanCfg.MaxPendingAmount capacityMSat := lnwire.NewMSatFromSatoshis(completeChan.Capacity) if fwdMaxHTLC > capacityMSat { fwdMaxHTLC = capacityMSat } ann, err := f.newChanAnnouncement( f.cfg.IDKey, completeChan.IdentityPub, completeChan.LocalChanCfg.MultiSigKey.PubKey, completeChan.RemoteChanCfg.MultiSigKey.PubKey, *shortChanID, chanID, fwdMinHTLC, fwdMaxHTLC, ) if err != nil { return fmt.Errorf("error generating channel "+ "announcement: %v", err) } // Send ChannelAnnouncement and ChannelUpdate to the gossiper to add // to the Router's topology. errChan := f.cfg.SendAnnouncement( ann.chanAnn, discovery.ChannelCapacity(completeChan.Capacity), discovery.ChannelPoint(completeChan.FundingOutpoint), ) select { case err := <-errChan: if err != nil { if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { fndgLog.Debugf("Router rejected "+ "ChannelAnnouncement: %v", err) } else { return fmt.Errorf("error sending channel "+ "announcement: %v", err) } } case <-f.quit: return ErrFundingManagerShuttingDown } errChan = f.cfg.SendAnnouncement(ann.chanUpdateAnn) select { case err := <-errChan: if err != nil { if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { fndgLog.Debugf("Router rejected "+ "ChannelUpdate: %v", err) } else { return fmt.Errorf("error sending channel "+ "update: %v", err) } } case <-f.quit: return ErrFundingManagerShuttingDown } return nil } // annAfterSixConfs broadcasts the necessary channel announcement messages to // the network after 6 confs. Should be called after the fundingLocked message // is sent and the channel is added to the router graph (channelState is // 'addedToRouterGraph') and the channel is ready to be used. This is the last // step in the channel opening process, and the opening state will be deleted // from the database if successful. func (f *fundingManager) annAfterSixConfs(completeChan *channeldb.OpenChannel, shortChanID *lnwire.ShortChannelID) error { // If this channel is not meant to be announced to the greater network, // we'll only send our NodeAnnouncement to our counterparty to ensure we // don't leak any of our information. announceChan := completeChan.ChannelFlags&lnwire.FFAnnounceChannel != 0 if !announceChan { fndgLog.Debugf("Will not announce private channel %v.", shortChanID.ToUint64()) peerChan := make(chan lnpeer.Peer, 1) var peerKey [33]byte copy(peerKey[:], completeChan.IdentityPub.SerializeCompressed()) f.cfg.NotifyWhenOnline(peerKey, peerChan) var peer lnpeer.Peer select { case peer = <-peerChan: case <-f.quit: return ErrFundingManagerShuttingDown } nodeAnn, err := f.cfg.CurrentNodeAnnouncement() if err != nil { return fmt.Errorf("unable to retrieve current node "+ "announcement: %v", err) } chanID := lnwire.NewChanIDFromOutPoint( &completeChan.FundingOutpoint, ) pubKey := peer.PubKey() fndgLog.Debugf("Sending our NodeAnnouncement for "+ "ChannelID(%v) to %x", chanID, pubKey) // TODO(halseth): make reliable. If the peer is not online this // will fail, and the opening process will stop. Should instead // block here, waiting for the peer to come online. if err := peer.SendMessage(true, &nodeAnn); err != nil { return fmt.Errorf("unable to send node announcement "+ "to peer %x: %v", pubKey, err) } } else { // Otherwise, we'll wait until the funding transaction has // reached 6 confirmations before announcing it. numConfs := uint32(completeChan.NumConfsRequired) if numConfs < 6 { numConfs = 6 } txid := completeChan.FundingOutpoint.Hash fndgLog.Debugf("Will announce channel %v after ChannelPoint"+ "(%v) has gotten %d confirmations", shortChanID.ToUint64(), completeChan.FundingOutpoint, numConfs) fundingScript, err := makeFundingScript(completeChan) if err != nil { return fmt.Errorf("unable to create funding script for "+ "ChannelPoint(%v): %v", completeChan.FundingOutpoint, err) } // Register with the ChainNotifier for a notification once the // funding transaction reaches at least 6 confirmations. confNtfn, err := f.cfg.Notifier.RegisterConfirmationsNtfn( &txid, fundingScript, numConfs, completeChan.FundingBroadcastHeight, ) if err != nil { return fmt.Errorf("Unable to register for "+ "confirmation of ChannelPoint(%v): %v", completeChan.FundingOutpoint, err) } // Wait until 6 confirmations has been reached or the wallet // signals a shutdown. select { case _, ok := <-confNtfn.Confirmed: if !ok { return fmt.Errorf("ChainNotifier shutting "+ "down, cannot complete funding flow "+ "for ChannelPoint(%v)", completeChan.FundingOutpoint) } // Fallthrough. case <-f.quit: return fmt.Errorf("%v, stopping funding flow for "+ "ChannelPoint(%v)", ErrFundingManagerShuttingDown, completeChan.FundingOutpoint) } fundingPoint := completeChan.FundingOutpoint chanID := lnwire.NewChanIDFromOutPoint(&fundingPoint) fndgLog.Infof("Announcing ChannelPoint(%v), short_chan_id=%v", &fundingPoint, shortChanID) // Create and broadcast the proofs required to make this channel // public and usable for other nodes for routing. err = f.announceChannel( f.cfg.IDKey, completeChan.IdentityPub, completeChan.LocalChanCfg.MultiSigKey.PubKey, completeChan.RemoteChanCfg.MultiSigKey.PubKey, *shortChanID, chanID, ) if err != nil { return fmt.Errorf("channel announcement failed: %v", err) } fndgLog.Debugf("Channel with ChannelPoint(%v), short_chan_id=%v "+ "announced", &fundingPoint, shortChanID) } return nil } // processFundingLocked sends a message to the fundingManager allowing it to // finish the funding workflow. func (f *fundingManager) processFundingLocked(msg *lnwire.FundingLocked, peer lnpeer.Peer) { select { case f.fundingMsgs <- &fundingLockedMsg{msg, peer}: case <-f.quit: return } } // handleFundingLocked finalizes the channel funding process and enables the // channel to enter normal operating mode. func (f *fundingManager) handleFundingLocked(fmsg *fundingLockedMsg) { defer f.wg.Done() fndgLog.Debugf("Received FundingLocked for ChannelID(%v) from "+ "peer %x", fmsg.msg.ChanID, fmsg.peer.IdentityKey().SerializeCompressed()) // If we are currently in the process of handling a funding locked // message for this channel, ignore. f.handleFundingLockedMtx.Lock() _, ok := f.handleFundingLockedBarriers[fmsg.msg.ChanID] if ok { fndgLog.Infof("Already handling fundingLocked for "+ "ChannelID(%v), ignoring.", fmsg.msg.ChanID) f.handleFundingLockedMtx.Unlock() return } // If not already handling fundingLocked for this channel, set up // barrier, and move on. f.handleFundingLockedBarriers[fmsg.msg.ChanID] = struct{}{} f.handleFundingLockedMtx.Unlock() defer func() { f.handleFundingLockedMtx.Lock() delete(f.handleFundingLockedBarriers, fmsg.msg.ChanID) f.handleFundingLockedMtx.Unlock() }() f.localDiscoveryMtx.Lock() localDiscoverySignal, ok := f.localDiscoverySignals[fmsg.msg.ChanID] f.localDiscoveryMtx.Unlock() if ok { // Before we proceed with processing the funding locked // message, we'll wait for the local waitForFundingConfirmation // goroutine to signal that it has the necessary state in // place. Otherwise, we may be missing critical information // required to handle forwarded HTLC's. select { case <-localDiscoverySignal: // Fallthrough case <-f.quit: return } // With the signal received, we can now safely delete the entry // from the map. f.localDiscoveryMtx.Lock() delete(f.localDiscoverySignals, fmsg.msg.ChanID) f.localDiscoveryMtx.Unlock() } // First, we'll attempt to locate the channel whose funding workflow is // being finalized by this message. We go to the database rather than // our reservation map as we may have restarted, mid funding flow. chanID := fmsg.msg.ChanID channel, err := f.cfg.FindChannel(chanID) if err != nil { fndgLog.Errorf("Unable to locate ChannelID(%v), cannot complete "+ "funding", chanID) return } // If the RemoteNextRevocation is non-nil, it means that we have // already processed fundingLocked for this channel, so ignore. if channel.RemoteNextRevocation != nil { fndgLog.Infof("Received duplicate fundingLocked for "+ "ChannelID(%v), ignoring.", chanID) return } // The funding locked message contains the next commitment point we'll // need to create the next commitment state for the remote party. So // we'll insert that into the channel now before passing it along to // other sub-systems. err = channel.InsertNextRevocation(fmsg.msg.NextPerCommitmentPoint) if err != nil { fndgLog.Errorf("unable to insert next commitment point: %v", err) return } // Launch a defer so we _ensure_ that the channel barrier is properly // closed even if the target peer is no longer online at this point. defer func() { // Close the active channel barrier signaling the readHandler // that commitment related modifications to this channel can // now proceed. f.barrierMtx.Lock() chanBarrier, ok := f.newChanBarriers[chanID] if ok { fndgLog.Tracef("Closing chan barrier for ChanID(%v)", chanID) close(chanBarrier) delete(f.newChanBarriers, chanID) } f.barrierMtx.Unlock() }() if err := fmsg.peer.AddNewChannel(channel, f.quit); err != nil { fndgLog.Errorf("Unable to add new channel %v with peer %x: %v", fmsg.peer.IdentityKey().SerializeCompressed(), channel.FundingOutpoint, err) } } // chanAnnouncement encapsulates the two authenticated announcements that we // send out to the network after a new channel has been created locally. type chanAnnouncement struct { chanAnn *lnwire.ChannelAnnouncement chanUpdateAnn *lnwire.ChannelUpdate chanProof *lnwire.AnnounceSignatures } // newChanAnnouncement creates the authenticated channel announcement messages // required to broadcast a newly created channel to the network. The // announcement is two part: the first part authenticates the existence of the // channel and contains four signatures binding the funding pub keys and // identity pub keys of both parties to the channel, and the second segment is // authenticated only by us and contains our directional routing policy for the // channel. func (f *fundingManager) newChanAnnouncement(localPubKey, remotePubKey, localFundingKey, remoteFundingKey *btcec.PublicKey, shortChanID lnwire.ShortChannelID, chanID lnwire.ChannelID, fwdMinHTLC, fwdMaxHTLC lnwire.MilliSatoshi) (*chanAnnouncement, error) { chainHash := *f.cfg.Wallet.Cfg.NetParams.GenesisHash // The unconditional section of the announcement is the ShortChannelID // itself which compactly encodes the location of the funding output // within the blockchain. chanAnn := &lnwire.ChannelAnnouncement{ ShortChannelID: shortChanID, Features: lnwire.NewRawFeatureVector(), ChainHash: chainHash, } // The chanFlags field indicates which directed edge of the channel is // being updated within the ChannelUpdateAnnouncement announcement // below. A value of zero means it's the edge of the "first" node and 1 // being the other node. var chanFlags lnwire.ChanUpdateChanFlags // The lexicographical ordering of the two identity public keys of the // nodes indicates which of the nodes is "first". If our serialized // identity key is lower than theirs then we're the "first" node and // second otherwise. selfBytes := localPubKey.SerializeCompressed() remoteBytes := remotePubKey.SerializeCompressed() if bytes.Compare(selfBytes, remoteBytes) == -1 { copy(chanAnn.NodeID1[:], localPubKey.SerializeCompressed()) copy(chanAnn.NodeID2[:], remotePubKey.SerializeCompressed()) copy(chanAnn.BitcoinKey1[:], localFundingKey.SerializeCompressed()) copy(chanAnn.BitcoinKey2[:], remoteFundingKey.SerializeCompressed()) // If we're the first node then update the chanFlags to // indicate the "direction" of the update. chanFlags = 0 } else { copy(chanAnn.NodeID1[:], remotePubKey.SerializeCompressed()) copy(chanAnn.NodeID2[:], localPubKey.SerializeCompressed()) copy(chanAnn.BitcoinKey1[:], remoteFundingKey.SerializeCompressed()) copy(chanAnn.BitcoinKey2[:], localFundingKey.SerializeCompressed()) // If we're the second node then update the chanFlags to // indicate the "direction" of the update. chanFlags = 1 } // Our channel update message flags will signal that we support the // max_htlc field. msgFlags := lnwire.ChanUpdateOptionMaxHtlc // We announce the channel with the default values. Some of // these values can later be changed by crafting a new ChannelUpdate. chanUpdateAnn := &lnwire.ChannelUpdate{ ShortChannelID: shortChanID, ChainHash: chainHash, Timestamp: uint32(time.Now().Unix()), MessageFlags: msgFlags, ChannelFlags: chanFlags, TimeLockDelta: uint16(f.cfg.DefaultRoutingPolicy.TimeLockDelta), // We use the HtlcMinimumMsat that the remote party required us // to use, as our ChannelUpdate will be used to carry HTLCs // towards them. HtlcMinimumMsat: fwdMinHTLC, HtlcMaximumMsat: fwdMaxHTLC, BaseFee: uint32(f.cfg.DefaultRoutingPolicy.BaseFee), FeeRate: uint32(f.cfg.DefaultRoutingPolicy.FeeRate), } // With the channel update announcement constructed, we'll generate a // signature that signs a double-sha digest of the announcement. // This'll serve to authenticate this announcement and any other future // updates we may send. chanUpdateMsg, err := chanUpdateAnn.DataToSign() if err != nil { return nil, err } sig, err := f.cfg.SignMessage(f.cfg.IDKey, chanUpdateMsg) if err != nil { return nil, errors.Errorf("unable to generate channel "+ "update announcement signature: %v", err) } chanUpdateAnn.Signature, err = lnwire.NewSigFromSignature(sig) if err != nil { return nil, errors.Errorf("unable to generate channel "+ "update announcement signature: %v", err) } // The channel existence proofs itself is currently announced in // distinct message. In order to properly authenticate this message, we // need two signatures: one under the identity public key used which // signs the message itself and another signature of the identity // public key under the funding key itself. // // TODO(roasbeef): use SignAnnouncement here instead? chanAnnMsg, err := chanAnn.DataToSign() if err != nil { return nil, err } nodeSig, err := f.cfg.SignMessage(f.cfg.IDKey, chanAnnMsg) if err != nil { return nil, errors.Errorf("unable to generate node "+ "signature for channel announcement: %v", err) } bitcoinSig, err := f.cfg.SignMessage(localFundingKey, chanAnnMsg) if err != nil { return nil, errors.Errorf("unable to generate bitcoin "+ "signature for node public key: %v", err) } // Finally, we'll generate the announcement proof which we'll use to // provide the other side with the necessary signatures required to // allow them to reconstruct the full channel announcement. proof := &lnwire.AnnounceSignatures{ ChannelID: chanID, ShortChannelID: shortChanID, } proof.NodeSignature, err = lnwire.NewSigFromSignature(nodeSig) if err != nil { return nil, err } proof.BitcoinSignature, err = lnwire.NewSigFromSignature(bitcoinSig) if err != nil { return nil, err } return &chanAnnouncement{ chanAnn: chanAnn, chanUpdateAnn: chanUpdateAnn, chanProof: proof, }, nil } // announceChannel announces a newly created channel to the rest of the network // by crafting the two authenticated announcements required for the peers on // the network to recognize the legitimacy of the channel. The crafted // announcements are then sent to the channel router to handle broadcasting to // the network during its next trickle. // This method is synchronous and will return when all the network requests // finish, either successfully or with an error. func (f *fundingManager) announceChannel(localIDKey, remoteIDKey, localFundingKey, remoteFundingKey *btcec.PublicKey, shortChanID lnwire.ShortChannelID, chanID lnwire.ChannelID) error { // First, we'll create the batch of announcements to be sent upon // initial channel creation. This includes the channel announcement // itself, the channel update announcement, and our half of the channel // proof needed to fully authenticate the channel. // // We can pass in zeroes for the min and max htlc policy, because we // only use the channel announcement message from the returned struct. ann, err := f.newChanAnnouncement(localIDKey, remoteIDKey, localFundingKey, remoteFundingKey, shortChanID, chanID, 0, 0, ) if err != nil { fndgLog.Errorf("can't generate channel announcement: %v", err) return err } // We only send the channel proof announcement and the node announcement // because addToRouterGraph previously sent the ChannelAnnouncement and // the ChannelUpdate announcement messages. The channel proof and node // announcements are broadcast to the greater network. errChan := f.cfg.SendAnnouncement(ann.chanProof) select { case err := <-errChan: if err != nil { if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { fndgLog.Debugf("Router rejected "+ "AnnounceSignatures: %v", err) } else { fndgLog.Errorf("Unable to send channel "+ "proof: %v", err) return err } } case <-f.quit: return ErrFundingManagerShuttingDown } // Now that the channel is announced to the network, we will also // obtain and send a node announcement. This is done since a node // announcement is only accepted after a channel is known for that // particular node, and this might be our first channel. nodeAnn, err := f.cfg.CurrentNodeAnnouncement() if err != nil { fndgLog.Errorf("can't generate node announcement: %v", err) return err } errChan = f.cfg.SendAnnouncement(&nodeAnn) select { case err := <-errChan: if err != nil { if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { fndgLog.Debugf("Router rejected "+ "NodeAnnouncement: %v", err) } else { fndgLog.Errorf("Unable to send node "+ "announcement: %v", err) return err } } case <-f.quit: return ErrFundingManagerShuttingDown } return nil } // initFundingWorkflow sends a message to the funding manager instructing it // to initiate a single funder workflow with the source peer. // TODO(roasbeef): re-visit blocking nature.. func (f *fundingManager) initFundingWorkflow(peer lnpeer.Peer, req *openChanReq) { f.fundingRequests <- &initFundingMsg{ peer: peer, openChanReq: req, } } // getUpfrontShutdownScript takes a user provided script and a getScript // function which can be used to generate an upfront shutdown script. If our // peer does not support the feature, this function will error if a non-zero // script was provided by the user, and return an empty script otherwise. If // our peer does support the feature, we will return the user provided script // if non-zero, or a freshly generated script if our node is configured to set // upfront shutdown scripts automatically. func getUpfrontShutdownScript(peer lnpeer.Peer, script lnwire.DeliveryAddress, getScript func() (lnwire.DeliveryAddress, error)) (lnwire.DeliveryAddress, error) { // Check whether the remote peer supports upfront shutdown scripts. remoteUpfrontShutdown := peer.RemoteFeatures().HasFeature( lnwire.UpfrontShutdownScriptOptional, ) // If the peer does not support upfront shutdown scripts, and one has been // provided, return an error because the feature is not supported. if !remoteUpfrontShutdown && len(script) != 0 { return nil, errUpfrontShutdownScriptNotSupported } // If the peer does not support upfront shutdown, return an empty address. if !remoteUpfrontShutdown { return nil, nil } // If the user has provided an script and the peer supports the feature, // return it. Note that user set scripts override the enable upfront // shutdown flag. if len(script) > 0 { return script, nil } // If we do not have setting of upfront shutdown script enabled, return // an empty script. if !cfg.EnableUpfrontShutdown { return nil, nil } return getScript() } // handleInitFundingMsg creates a channel reservation within the daemon's // wallet, then sends a funding request to the remote peer kicking off the // funding workflow. func (f *fundingManager) handleInitFundingMsg(msg *initFundingMsg) { var ( peerKey = msg.peer.IdentityKey() localAmt = msg.localFundingAmt minHtlcIn = msg.minHtlcIn remoteCsvDelay = msg.remoteCsvDelay ) // We'll determine our dust limit depending on which chain is active. var ourDustLimit btcutil.Amount switch registeredChains.PrimaryChain() { case bitcoinChain: ourDustLimit = lnwallet.DefaultDustLimit() case litecoinChain: ourDustLimit = defaultLitecoinDustLimit } fndgLog.Infof("Initiating fundingRequest(local_amt=%v "+ "(subtract_fees=%v), push_amt=%v, chain_hash=%v, peer=%x, "+ "dust_limit=%v, min_confs=%v)", localAmt, msg.subtractFees, msg.pushAmt, msg.chainHash, peerKey.SerializeCompressed(), ourDustLimit, msg.minConfs) // First, we'll query the fee estimator for a fee that should get the // commitment transaction confirmed by the next few blocks (conf target // of 3). We target the near blocks here to ensure that we'll be able // to execute a timely unilateral channel closure if needed. commitFeePerKw, err := f.cfg.FeeEstimator.EstimateFeePerKW(3) if err != nil { msg.err <- err return } // We set the channel flags to indicate whether we want this channel to // be announced to the network. var channelFlags lnwire.FundingFlag if !msg.openChanReq.private { // This channel will be announced. channelFlags = lnwire.FFAnnounceChannel } // If the caller specified their own channel ID, then we'll use that. // Otherwise we'll generate a fresh one as normal. This will be used // to track this reservation throughout its lifetime. var chanID [32]byte if msg.pendingChanID == zeroID { chanID = f.nextPendingChanID() } else { // If the user specified their own pending channel ID, then // we'll ensure it doesn't collide with any existing pending // channel ID. chanID = msg.pendingChanID if _, err := f.getReservationCtx(peerKey, chanID); err == nil { msg.err <- fmt.Errorf("pendingChannelID(%x) "+ "already present", chanID[:]) return } } // Initialize a funding reservation with the local wallet. If the // wallet doesn't have enough funds to commit to this channel, then the // request will fail, and be aborted. // // Before we init the channel, we'll also check to see if we've // negotiated the new tweakless commitment format. This is only the // case if *both* us and the remote peer are signaling the proper // feature bit. localTweakless := msg.peer.LocalFeatures().HasFeature( lnwire.StaticRemoteKeyOptional, ) remoteTweakless := msg.peer.RemoteFeatures().HasFeature( lnwire.StaticRemoteKeyOptional, ) tweaklessCommitment := localTweakless && remoteTweakless req := &lnwallet.InitFundingReserveMsg{ ChainHash: &msg.chainHash, PendingChanID: chanID, NodeID: peerKey, NodeAddr: msg.peer.Address(), SubtractFees: msg.subtractFees, LocalFundingAmt: localAmt, RemoteFundingAmt: 0, CommitFeePerKw: commitFeePerKw, FundingFeePerKw: msg.fundingFeePerKw, PushMSat: msg.pushAmt, Flags: channelFlags, MinConfs: msg.minConfs, Tweakless: tweaklessCommitment, ChanFunder: msg.chanFunder, } reservation, err := f.cfg.Wallet.InitChannelReservation(req) if err != nil { msg.err <- err return } // Check whether the peer supports upfront shutdown, and get an address which // should be used (either a user specified address or a new address from the // wallet if our node is configured to set shutdown address by default). shutdown, err := getUpfrontShutdownScript( msg.peer, msg.openChanReq.shutdownScript, func() (lnwire.DeliveryAddress, error) { addr, err := f.cfg.Wallet.NewAddress(lnwallet.WitnessPubKey, false) if err != nil { return nil, err } return txscript.PayToAddrScript(addr) }, ) if err != nil { msg.err <- err return } // Set our upfront shutdown address in the existing reservation. reservation.SetOurUpfrontShutdown(shutdown) // Now that we have successfully reserved funds for this channel in the // wallet, we can fetch the final channel capacity. This is done at // this point since the final capacity might change in case of // SubtractFees=true. capacity := reservation.Capacity() fndgLog.Infof("Target commit tx sat/kw for pendingID(%x): %v", chanID, int64(commitFeePerKw)) // If the remote CSV delay was not set in the open channel request, // we'll use the RequiredRemoteDelay closure to compute the delay we // require given the total amount of funds within the channel. if remoteCsvDelay == 0 { remoteCsvDelay = f.cfg.RequiredRemoteDelay(capacity) } // If no minimum HTLC value was specified, use the default one. if minHtlcIn == 0 { minHtlcIn = f.cfg.DefaultMinHtlcIn } // If a pending channel map for this peer isn't already created, then // we create one, ultimately allowing us to track this pending // reservation within the target peer. peerIDKey := newSerializedKey(peerKey) f.resMtx.Lock() if _, ok := f.activeReservations[peerIDKey]; !ok { f.activeReservations[peerIDKey] = make(pendingChannels) } resCtx := &reservationWithCtx{ chanAmt: capacity, remoteCsvDelay: remoteCsvDelay, remoteMinHtlc: minHtlcIn, reservation: reservation, peer: msg.peer, updates: msg.updates, err: msg.err, } f.activeReservations[peerIDKey][chanID] = resCtx f.resMtx.Unlock() // Update the timestamp once the initFundingMsg has been handled. defer resCtx.updateTimestamp() // Once the reservation has been created, and indexed, queue a funding // request to the remote peer, kicking off the funding workflow. ourContribution := reservation.OurContribution() // Finally, we'll use the current value of the channels and our default // policy to determine of required commitment constraints for the // remote party. chanReserve := f.cfg.RequiredRemoteChanReserve(capacity, ourDustLimit) maxValue := f.cfg.RequiredRemoteMaxValue(capacity) maxHtlcs := f.cfg.RequiredRemoteMaxHTLCs(capacity) fndgLog.Infof("Starting funding workflow with %v for pending_id(%x), "+ "tweakless=%v", msg.peer.Address(), chanID, tweaklessCommitment) fundingOpen := lnwire.OpenChannel{ ChainHash: *f.cfg.Wallet.Cfg.NetParams.GenesisHash, PendingChannelID: chanID, FundingAmount: capacity, PushAmount: msg.pushAmt, DustLimit: ourContribution.DustLimit, MaxValueInFlight: maxValue, ChannelReserve: chanReserve, HtlcMinimum: minHtlcIn, FeePerKiloWeight: uint32(commitFeePerKw), CsvDelay: remoteCsvDelay, MaxAcceptedHTLCs: maxHtlcs, FundingKey: ourContribution.MultiSigKey.PubKey, RevocationPoint: ourContribution.RevocationBasePoint.PubKey, PaymentPoint: ourContribution.PaymentBasePoint.PubKey, HtlcPoint: ourContribution.HtlcBasePoint.PubKey, DelayedPaymentPoint: ourContribution.DelayBasePoint.PubKey, FirstCommitmentPoint: ourContribution.FirstCommitmentPoint, ChannelFlags: channelFlags, UpfrontShutdownScript: shutdown, } if err := msg.peer.SendMessage(true, &fundingOpen); err != nil { e := fmt.Errorf("Unable to send funding request message: %v", err) fndgLog.Errorf(e.Error()) // Since we were unable to send the initial message to the peer // and start the funding flow, we'll cancel this reservation. if _, err := f.cancelReservationCtx(peerKey, chanID); err != nil { fndgLog.Errorf("unable to cancel reservation: %v", err) } msg.err <- e return } } // waitUntilChannelOpen is designed to prevent other lnd subsystems from // sending new update messages to a channel before the channel is fully // opened. func (f *fundingManager) waitUntilChannelOpen(targetChan lnwire.ChannelID, quit <-chan struct{}) error { f.barrierMtx.RLock() barrier, ok := f.newChanBarriers[targetChan] f.barrierMtx.RUnlock() if ok { fndgLog.Tracef("waiting for chan barrier signal for ChanID(%v)", targetChan) select { case <-barrier: case <-quit: return ErrFundingManagerShuttingDown case <-f.quit: return ErrFundingManagerShuttingDown } fndgLog.Tracef("barrier for ChanID(%v) closed", targetChan) return nil } return nil } // processFundingError sends a message to the fundingManager allowing it to // process the occurred generic error. func (f *fundingManager) processFundingError(err *lnwire.Error, peerKey *btcec.PublicKey) { select { case f.fundingMsgs <- &fundingErrorMsg{err, peerKey}: case <-f.quit: return } } // handleErrorMsg processes the error which was received from remote peer, // depending on the type of error we should do different clean up steps and // inform the user about it. func (f *fundingManager) handleErrorMsg(fmsg *fundingErrorMsg) { protocolErr := fmsg.err chanID := fmsg.err.ChanID // First, we'll attempt to retrieve and cancel the funding workflow // that this error was tied to. If we're unable to do so, then we'll // exit early as this was an unwarranted error. resCtx, err := f.cancelReservationCtx(fmsg.peerKey, chanID) if err != nil { fndgLog.Warnf("Received error for non-existent funding "+ "flow: %v (%v)", err, protocolErr.Error()) return } // If we did indeed find the funding workflow, then we'll return the // error back to the caller (if any), and cancel the workflow itself. fundingErr := fmt.Errorf("received funding error from %x: %v", fmsg.peerKey.SerializeCompressed(), protocolErr.Error(), ) fndgLog.Errorf(fundingErr.Error()) resCtx.err <- fundingErr } // pruneZombieReservations loops through all pending reservations and fails the // funding flow for any reservations that have not been updated since the // ReservationTimeout and are not locked waiting for the funding transaction. func (f *fundingManager) pruneZombieReservations() { zombieReservations := make(pendingChannels) f.resMtx.RLock() for _, pendingReservations := range f.activeReservations { for pendingChanID, resCtx := range pendingReservations { if resCtx.isLocked() { continue } if time.Since(resCtx.lastUpdated) > f.cfg.ReservationTimeout { zombieReservations[pendingChanID] = resCtx } } } f.resMtx.RUnlock() for pendingChanID, resCtx := range zombieReservations { err := fmt.Errorf("reservation timed out waiting for peer "+ "(peer_id:%v, chan_id:%x)", resCtx.peer.IdentityKey(), pendingChanID[:]) fndgLog.Warnf(err.Error()) f.failFundingFlow(resCtx.peer, pendingChanID, err) } } // cancelReservationCtx does all needed work in order to securely cancel the // reservation. func (f *fundingManager) cancelReservationCtx(peerKey *btcec.PublicKey, pendingChanID [32]byte) (*reservationWithCtx, error) { fndgLog.Infof("Cancelling funding reservation for node_key=%x, "+ "chan_id=%x", peerKey.SerializeCompressed(), pendingChanID[:]) peerIDKey := newSerializedKey(peerKey) f.resMtx.Lock() defer f.resMtx.Unlock() nodeReservations, ok := f.activeReservations[peerIDKey] if !ok { // No reservations for this node. return nil, errors.Errorf("no active reservations for peer(%x)", peerIDKey[:]) } ctx, ok := nodeReservations[pendingChanID] if !ok { return nil, errors.Errorf("unknown channel (id: %x) for "+ "peer(%x)", pendingChanID[:], peerIDKey[:]) } if err := ctx.reservation.Cancel(); err != nil { return nil, errors.Errorf("unable to cancel reservation: %v", err) } delete(nodeReservations, pendingChanID) // If this was the last active reservation for this peer, delete the // peer's entry altogether. if len(nodeReservations) == 0 { delete(f.activeReservations, peerIDKey) } return ctx, nil } // deleteReservationCtx deletes the reservation uniquely identified by the // target public key of the peer, and the specified pending channel ID. func (f *fundingManager) deleteReservationCtx(peerKey *btcec.PublicKey, pendingChanID [32]byte) { // TODO(roasbeef): possibly cancel funding barrier in peer's // channelManager? peerIDKey := newSerializedKey(peerKey) f.resMtx.Lock() defer f.resMtx.Unlock() nodeReservations, ok := f.activeReservations[peerIDKey] if !ok { // No reservations for this node. return } delete(nodeReservations, pendingChanID) // If this was the last active reservation for this peer, delete the // peer's entry altogether. if len(nodeReservations) == 0 { delete(f.activeReservations, peerIDKey) } } // getReservationCtx returns the reservation context for a particular pending // channel ID for a target peer. func (f *fundingManager) getReservationCtx(peerKey *btcec.PublicKey, pendingChanID [32]byte) (*reservationWithCtx, error) { peerIDKey := newSerializedKey(peerKey) f.resMtx.RLock() resCtx, ok := f.activeReservations[peerIDKey][pendingChanID] f.resMtx.RUnlock() if !ok { return nil, errors.Errorf("unknown channel (id: %x) for "+ "peer(%x)", pendingChanID[:], peerIDKey[:]) } return resCtx, nil } // IsPendingChannel returns a boolean indicating whether the channel identified // by the pendingChanID and given peer is pending, meaning it is in the process // of being funded. After the funding transaction has been confirmed, the // channel will receive a new, permanent channel ID, and will no longer be // considered pending. func (f *fundingManager) IsPendingChannel(pendingChanID [32]byte, peerKey *btcec.PublicKey) bool { peerIDKey := newSerializedKey(peerKey) f.resMtx.RLock() _, ok := f.activeReservations[peerIDKey][pendingChanID] f.resMtx.RUnlock() return ok } func copyPubKey(pub *btcec.PublicKey) *btcec.PublicKey { return &btcec.PublicKey{ Curve: btcec.S256(), X: pub.X, Y: pub.Y, } } // saveChannelOpeningState saves the channelOpeningState for the provided // chanPoint to the channelOpeningStateBucket. func (f *fundingManager) saveChannelOpeningState(chanPoint *wire.OutPoint, state channelOpeningState, shortChanID *lnwire.ShortChannelID) error { return f.cfg.Wallet.Cfg.Database.Update(func(tx *bbolt.Tx) error { bucket, err := tx.CreateBucketIfNotExists(channelOpeningStateBucket) if err != nil { return err } var outpointBytes bytes.Buffer if err = writeOutpoint(&outpointBytes, chanPoint); err != nil { return err } // Save state and the uint64 representation of the shortChanID // for later use. scratch := make([]byte, 10) byteOrder.PutUint16(scratch[:2], uint16(state)) byteOrder.PutUint64(scratch[2:], shortChanID.ToUint64()) return bucket.Put(outpointBytes.Bytes(), scratch) }) } // getChannelOpeningState fetches the channelOpeningState for the provided // chanPoint from the database, or returns ErrChannelNotFound if the channel // is not found. func (f *fundingManager) getChannelOpeningState(chanPoint *wire.OutPoint) ( channelOpeningState, *lnwire.ShortChannelID, error) { var state channelOpeningState var shortChanID lnwire.ShortChannelID err := f.cfg.Wallet.Cfg.Database.View(func(tx *bbolt.Tx) error { bucket := tx.Bucket(channelOpeningStateBucket) if bucket == nil { // If the bucket does not exist, it means we never added // a channel to the db, so return ErrChannelNotFound. return ErrChannelNotFound } var outpointBytes bytes.Buffer if err := writeOutpoint(&outpointBytes, chanPoint); err != nil { return err } value := bucket.Get(outpointBytes.Bytes()) if value == nil { return ErrChannelNotFound } state = channelOpeningState(byteOrder.Uint16(value[:2])) shortChanID = lnwire.NewShortChanIDFromInt(byteOrder.Uint64(value[2:])) return nil }) if err != nil { return 0, nil, err } return state, &shortChanID, nil } // deleteChannelOpeningState removes any state for chanPoint from the database. func (f *fundingManager) deleteChannelOpeningState(chanPoint *wire.OutPoint) error { return f.cfg.Wallet.Cfg.Database.Update(func(tx *bbolt.Tx) error { bucket := tx.Bucket(channelOpeningStateBucket) if bucket == nil { return fmt.Errorf("Bucket not found") } var outpointBytes bytes.Buffer if err := writeOutpoint(&outpointBytes, chanPoint); err != nil { return err } return bucket.Delete(outpointBytes.Bytes()) }) }