package wtclient import ( "container/list" "fmt" "sync" "time" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/lightningnetwork/lnd/input" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/watchtower/wtdb" "github.com/lightningnetwork/lnd/watchtower/wtserver" "github.com/lightningnetwork/lnd/watchtower/wtwire" ) // retryInterval is the default duration we will wait between attempting to // connect back out to a tower if the prior state update failed. const retryInterval = 2 * time.Second // reserveStatus is an enum that signals how full a particular session is. type reserveStatus uint8 const ( // reserveAvailable indicates that the session has space for at least // one more backup. reserveAvailable reserveStatus = iota // reserveExhausted indicates that all slots in the session have been // allocated. reserveExhausted ) // sessionQueueConfig bundles the resources required by the sessionQueue to // perform its duties. All entries MUST be non-nil. type sessionQueueConfig struct { // ClientSession provides access to the negotiated session parameters // and updating its persistent storage. ClientSession *wtdb.ClientSession // ChainHash identifies the chain for which the session's justice // transactions are targeted. ChainHash chainhash.Hash // Dial allows the client to dial the tower using it's public key and // net address. Dial func(*btcec.PrivateKey, *lnwire.NetAddress) (wtserver.Peer, error) // SendMessage encodes, encrypts, and writes a message to the given peer. SendMessage func(wtserver.Peer, wtwire.Message) error // ReadMessage receives, decypts, and decodes a message from the given // peer. ReadMessage func(wtserver.Peer) (wtwire.Message, error) // Signer facilitates signing of inputs, used to construct the witnesses // for justice transaction inputs. Signer input.Signer // DB provides access to the client's stable storage. DB DB // MinBackoff defines the initial backoff applied by the session // queue before reconnecting to the tower after a failed or partially // successful batch is sent. Subsequent backoff durations will grow // exponentially up until MaxBackoff. MinBackoff time.Duration // MaxBackoff defines the maximum backoff applied by the session // queue before reconnecting to the tower after a failed or partially // successful batch is sent. If the exponential backoff produces a // timeout greater than this value, the backoff duration will be clamped // to MaxBackoff. MaxBackoff time.Duration } // sessionQueue implements a reliable queue that will encrypt and send accepted // backups to the watchtower specified in the config's ClientSession. Calling // Quit will attempt to perform a clean shutdown by receiving an ACK from the // tower for all pending backups before exiting. The clean shutdown can be // aborted by using ForceQuit, which will attempt to shutdown the queue // immediately. type sessionQueue struct { started sync.Once stopped sync.Once forced sync.Once cfg *sessionQueueConfig commitQueue *list.List pendingQueue *list.List queueMtx sync.Mutex queueCond *sync.Cond localInit *wtwire.Init towerAddr *lnwire.NetAddress seqNum uint16 retryBackoff time.Duration quit chan struct{} forceQuit chan struct{} shutdown chan struct{} } // newSessionQueue intiializes a fresh sessionQueue. func newSessionQueue(cfg *sessionQueueConfig) *sessionQueue { localInit := wtwire.NewInitMessage( lnwire.NewRawFeatureVector(wtwire.WtSessionsRequired), cfg.ChainHash, ) towerAddr := &lnwire.NetAddress{ IdentityKey: cfg.ClientSession.Tower.IdentityKey, Address: cfg.ClientSession.Tower.Addresses[0], } sq := &sessionQueue{ cfg: cfg, commitQueue: list.New(), pendingQueue: list.New(), localInit: localInit, towerAddr: towerAddr, seqNum: cfg.ClientSession.SeqNum, retryBackoff: cfg.MinBackoff, quit: make(chan struct{}), forceQuit: make(chan struct{}), shutdown: make(chan struct{}), } sq.queueCond = sync.NewCond(&sq.queueMtx) // The database should return them in sorted order, and session queue's // sequence number will be equal to that of the last committed update. for _, update := range sq.cfg.ClientSession.CommittedUpdates { sq.commitQueue.PushBack(update) } return sq } // Start idempotently starts the sessionQueue so that it can begin accepting // backups. func (q *sessionQueue) Start() { q.started.Do(func() { // TODO(conner): load prior committed state updates from disk an // populate in queue. go q.sessionManager() }) } // Stop idempotently stops the sessionQueue by initiating a clean shutdown that // will clear all pending tasks in the queue before returning to the caller. func (q *sessionQueue) Stop() { q.stopped.Do(func() { log.Debugf("Stopping session queue %s", q.ID()) close(q.quit) q.signalUntilShutdown() // Skip log if we also force quit. select { case <-q.forceQuit: return default: } log.Debugf("Session queue %s successfully stopped", q.ID()) }) } // ForceQuit idempotently aborts any clean shutdown in progress and returns to // he caller after all lingering goroutines have spun down. func (q *sessionQueue) ForceQuit() { q.forced.Do(func() { log.Infof("Force quitting session queue %s", q.ID()) close(q.forceQuit) q.signalUntilShutdown() log.Infof("Session queue %s unclean shutdown complete", q.ID()) }) } // ID returns the wtdb.SessionID for the queue, which can be used to uniquely // identify this a particular queue. func (q *sessionQueue) ID() *wtdb.SessionID { return &q.cfg.ClientSession.ID } // AcceptTask attempts to queue a backupTask for delivery to the sessionQueue's // tower. The session will only be accepted if the queue is not already // exhausted and the task is successfully bound to the ClientSession. func (q *sessionQueue) AcceptTask(task *backupTask) (reserveStatus, bool) { q.queueCond.L.Lock() // Examine the current reserve status of the session queue. curStatus := q.reserveStatus() switch curStatus { // The session queue is exhausted, and cannot accept the task because it // is full. Reject the task such that it can be tried against a // different session. case reserveExhausted: q.queueCond.L.Unlock() return curStatus, false // The session queue is not exhausted. Compute the sweep and reward // outputs as a function of the session parameters. If the outputs are // dusty or uneconomical to backup, the task is rejected and will not be // tried again. // // TODO(conner): queue backups and retry with different session params. case reserveAvailable: err := task.bindSession(&q.cfg.ClientSession.ClientSessionBody) if err != nil { q.queueCond.L.Unlock() log.Debugf("SessionQueue %s rejected backup chanid=%s "+ "commit-height=%d: %v", q.ID(), task.id.ChanID, task.id.CommitHeight, err) return curStatus, false } } // The sweep and reward outputs satisfy the session's policy, queue the // task for final signing and delivery. q.pendingQueue.PushBack(task) // Finally, compute the session's *new* reserve status. This will be // used by the client to determine if it can continue using this session // queue, or if it should negotiate a new one. newStatus := q.reserveStatus() q.queueCond.L.Unlock() q.queueCond.Signal() return newStatus, true } // sessionManager is the primary event loop for the sessionQueue, and is // responsible for encrypting and sending accepted tasks to the tower. func (q *sessionQueue) sessionManager() { defer close(q.shutdown) for { q.queueCond.L.Lock() for q.commitQueue.Len() == 0 && q.pendingQueue.Len() == 0 { q.queueCond.Wait() select { case <-q.quit: if q.commitQueue.Len() == 0 && q.pendingQueue.Len() == 0 { q.queueCond.L.Unlock() return } case <-q.forceQuit: q.queueCond.L.Unlock() return default: } } q.queueCond.L.Unlock() // Exit immediately if a force quit has been requested. If the // either of the queues still has state updates to send to the // tower, we may never exit in the above case if we are unable // to reach the tower for some reason. select { case <-q.forceQuit: return default: } // Initiate a new connection to the watchtower and attempt to // drain all pending tasks. q.drainBackups() } } // drainBackups attempts to send all pending updates in the queue to the tower. func (q *sessionQueue) drainBackups() { // First, check that we are able to dial this session's tower. conn, err := q.cfg.Dial(q.cfg.ClientSession.SessionPrivKey, q.towerAddr) if err != nil { log.Errorf("Unable to dial watchtower at %v: %v", q.towerAddr, err) q.increaseBackoff() select { case <-time.After(q.retryBackoff): case <-q.forceQuit: } return } defer conn.Close() // Begin draining the queue of pending state updates. Before the first // update is sent, we will precede it with an Init message. If the first // is successful, subsequent updates can be streamed without sending an // Init. for sendInit := true; ; sendInit = false { // Generate the next state update to upload to the tower. This // method will first proceed in dequeueing committed updates // before attempting to dequeue any pending updates. stateUpdate, isPending, err := q.nextStateUpdate() if err != nil { log.Errorf("Unable to get next state update: %v", err) return } // Now, send the state update to the tower and wait for a reply. err = q.sendStateUpdate( conn, stateUpdate, q.localInit, sendInit, isPending, ) if err != nil { log.Errorf("Unable to send state update: %v", err) q.increaseBackoff() select { case <-time.After(q.retryBackoff): case <-q.forceQuit: } return } // If the last task was backed up successfully, we'll exit and // continue once more tasks are added to the queue. We'll also // clear any accumulated backoff as this batch was able to be // sent reliably. if stateUpdate.IsComplete == 1 { q.resetBackoff() return } // Always apply a small delay between sends, which makes the // unit tests more reliable. If we were requested to back off, // when we will do so. select { case <-time.After(time.Millisecond): case <-q.forceQuit: return } } } // nextStateUpdate returns the next wtwire.StateUpdate to upload to the tower. // If any committed updates are present, this method will reconstruct the state // update from the committed update using the current last applied value found // in the database. Otherwise, it will select the next pending update, craft the // payload, and commit an update before returning the state update to send. The // boolean value in the response is true if the state update is taken from the // pending queue, allowing the caller to remove the update from either the // commit or pending queue if the update is successfully acked. func (q *sessionQueue) nextStateUpdate() (*wtwire.StateUpdate, bool, error) { var ( seqNum uint16 update wtdb.CommittedUpdate isLast bool isPending bool ) q.queueCond.L.Lock() switch { // If the commit queue is non-empty, parse the next committed update. case q.commitQueue.Len() > 0: next := q.commitQueue.Front() update = next.Value.(wtdb.CommittedUpdate) seqNum = update.SeqNum // If this is the last item in the commit queue and no items // exist in the pending queue, we will use the IsComplete flag // in the StateUpdate to signal that the tower can release the // connection after replying to free up resources. isLast = q.commitQueue.Len() == 1 && q.pendingQueue.Len() == 0 q.queueCond.L.Unlock() log.Debugf("Reprocessing committed state update for "+ "session=%s seqnum=%d", q.ID(), seqNum) // Otherwise, craft and commit the next update from the pending queue. default: isPending = true // Determine the current sequence number to apply for this // pending update. seqNum = q.seqNum + 1 // Obtain the next task from the queue. next := q.pendingQueue.Front() task := next.Value.(*backupTask) // If this is the last item in the pending queue, we will use // the IsComplete flag in the StateUpdate to signal that the // tower can release the connection after replying to free up // resources. isLast = q.pendingQueue.Len() == 1 q.queueCond.L.Unlock() hint, encBlob, err := task.craftSessionPayload(q.cfg.Signer) if err != nil { // TODO(conner): mark will not send return nil, false, fmt.Errorf("unable to craft "+ "session payload: %v", err) } // TODO(conner): special case other obscure errors update = wtdb.CommittedUpdate{ SeqNum: seqNum, CommittedUpdateBody: wtdb.CommittedUpdateBody{ BackupID: task.id, Hint: hint, EncryptedBlob: encBlob, }, } log.Debugf("Committing state update for session=%s seqnum=%d", q.ID(), seqNum) } // Before sending the task to the tower, commit the state update // to disk using the assigned sequence number. If this task has already // been committed, the call will succeed and only be used for the // purpose of obtaining the last applied value to send to the tower. // // This step ensures that if we crash before receiving an ack that we // will retransmit the same update. If the tower successfully received // the update from before, it will reply with an ACK regardless of what // we send the next time. This step ensures that if we reliably send the // same update for a given sequence number, to prevent us from thinking // we backed up a state when we instead backed up another. lastApplied, err := q.cfg.DB.CommitUpdate(q.ID(), &update) if err != nil { // TODO(conner): mark failed/reschedule return nil, false, fmt.Errorf("unable to commit state update "+ "for session=%s seqnum=%d: %v", q.ID(), seqNum, err) } stateUpdate := &wtwire.StateUpdate{ SeqNum: update.SeqNum, LastApplied: lastApplied, Hint: update.Hint, EncryptedBlob: update.EncryptedBlob, } // Set the IsComplete flag if this is the last queued item. if isLast { stateUpdate.IsComplete = 1 } return stateUpdate, isPending, nil } // sendStateUpdate sends a wtwire.StateUpdate to the watchtower and processes // the ACK before returning. If sendInit is true, this method will first send // the localInit message and verify that the tower supports our required feature // bits. And error is returned if any part of the send fails. The boolean return // variable indicates whether or not we should back off before attempting to // send the next state update. func (q *sessionQueue) sendStateUpdate(conn wtserver.Peer, stateUpdate *wtwire.StateUpdate, localInit *wtwire.Init, sendInit, isPending bool) error { // If this is the first message being sent to the tower, we must send an // Init message to establish that server supports the features we // require. if sendInit { // Send Init to tower. err := q.cfg.SendMessage(conn, q.localInit) if err != nil { return err } // Receive Init from tower. remoteMsg, err := q.cfg.ReadMessage(conn) if err != nil { return err } remoteInit, ok := remoteMsg.(*wtwire.Init) if !ok { return fmt.Errorf("watchtower responded with %T to "+ "Init", remoteMsg) } // Validate Init. err = q.localInit.CheckRemoteInit( remoteInit, wtwire.FeatureNames, ) if err != nil { return err } } // Send StateUpdate to tower. err := q.cfg.SendMessage(conn, stateUpdate) if err != nil { return err } // Receive StateUpdate from tower. remoteMsg, err := q.cfg.ReadMessage(conn) if err != nil { return err } stateUpdateReply, ok := remoteMsg.(*wtwire.StateUpdateReply) if !ok { return fmt.Errorf("watchtower responded with %T to StateUpdate", remoteMsg) } // Process the reply from the tower. switch stateUpdateReply.Code { // The tower reported a successful update, validate the response and // record the last applied returned. case wtwire.CodeOK: // TODO(conner): handle other error cases properly, ban towers, etc. default: err := fmt.Errorf("received error code %v in "+ "StateUpdateReply from tower=%x session=%v", stateUpdateReply.Code, conn.RemotePub().SerializeCompressed(), q.ID()) log.Warnf("Unable to upload state update: %v", err) return err } lastApplied := stateUpdateReply.LastApplied err = q.cfg.DB.AckUpdate(q.ID(), stateUpdate.SeqNum, lastApplied) switch { case err == wtdb.ErrUnallocatedLastApplied: // TODO(conner): borked watchtower err = fmt.Errorf("unable to ack update=%d session=%s: %v", stateUpdate.SeqNum, q.ID(), err) log.Errorf("Failed to ack update: %v", err) return err case err == wtdb.ErrLastAppliedReversion: // TODO(conner): borked watchtower err = fmt.Errorf("unable to ack update=%d session=%s: %v", stateUpdate.SeqNum, q.ID(), err) log.Errorf("Failed to ack update: %v", err) return err case err != nil: err = fmt.Errorf("unable to ack update=%d session=%s: %v", stateUpdate.SeqNum, q.ID(), err) log.Errorf("Failed to ack update: %v", err) return err } log.Infof("Removing update session=%s seqnum=%d is_pending=%v "+ "from memory", q.ID(), stateUpdate.SeqNum, isPending) q.queueCond.L.Lock() if isPending { // If a pending update was successfully sent, increment the // sequence number and remove the item from the queue. This // ensures the total number of backups in the session remains // unchanged, which maintains the external view of the session's // reserve status. q.seqNum++ q.pendingQueue.Remove(q.pendingQueue.Front()) } else { // Otherwise, simply remove the update from the committed queue. // This has no effect on the queues reserve status since the // update had already been committed. q.commitQueue.Remove(q.commitQueue.Front()) } q.queueCond.L.Unlock() return nil } // reserveStatus returns a reserveStatus indicating whether or not the // sessionQueue can accept another task. reserveAvailable is returned when a // task can be accepted, and reserveExhausted is returned if the all slots in // the session have been allocated. // // NOTE: This method MUST be called with queueCond's exclusive lock held. func (q *sessionQueue) reserveStatus() reserveStatus { numPending := uint32(q.pendingQueue.Len()) maxUpdates := uint32(q.cfg.ClientSession.Policy.MaxUpdates) log.Debugf("SessionQueue %s reserveStatus seqnum=%d pending=%d "+ "max-updates=%d", q.ID(), q.seqNum, numPending, maxUpdates) if uint32(q.seqNum)+numPending < maxUpdates { return reserveAvailable } return reserveExhausted } // resetBackoff returns the connection backoff the minimum configured backoff. func (q *sessionQueue) resetBackoff() { q.retryBackoff = q.cfg.MinBackoff } // increaseBackoff doubles the current connection backoff, clamping to the // configured maximum backoff if it would exceed the limit. func (q *sessionQueue) increaseBackoff() { q.retryBackoff *= 2 if q.retryBackoff > q.cfg.MaxBackoff { q.retryBackoff = q.cfg.MaxBackoff } } // signalUntilShutdown strobes the sessionQueue's condition variable until the // main event loop exits. func (q *sessionQueue) signalUntilShutdown() { for { select { case <-time.After(time.Millisecond): q.queueCond.Signal() case <-q.shutdown: return } } } // sessionQueueSet maintains a mapping of SessionIDs to their corresponding // sessionQueue. type sessionQueueSet map[wtdb.SessionID]*sessionQueue // Add inserts a sessionQueue into the sessionQueueSet. func (s *sessionQueueSet) Add(sessionQueue *sessionQueue) { (*s)[*sessionQueue.ID()] = sessionQueue } // ApplyAndWait executes the nil-adic function returned from getApply for each // sessionQueue in the set in parallel, then waits for all of them to finish // before returning to the caller. func (s *sessionQueueSet) ApplyAndWait(getApply func(*sessionQueue) func()) { var wg sync.WaitGroup for _, sessionq := range *s { wg.Add(1) go func(sq *sessionQueue) { defer wg.Done() getApply(sq)() }(sessionq) } wg.Wait() }