package zpay32 import ( "errors" "fmt" "time" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg" "github.com/btcsuite/btcutil" lnwire "github.com/lightningnetwork/lnd/channeldb/migration/lnwire21" ) const ( // mSatPerBtc is the number of millisatoshis in 1 BTC. mSatPerBtc = 100000000000 // signatureBase32Len is the number of 5-bit groups needed to encode // the 512 bit signature + 8 bit recovery ID. signatureBase32Len = 104 // timestampBase32Len is the number of 5-bit groups needed to encode // the 35-bit timestamp. timestampBase32Len = 7 // hashBase32Len is the number of 5-bit groups needed to encode a // 256-bit hash. Note that the last group will be padded with zeroes. hashBase32Len = 52 // pubKeyBase32Len is the number of 5-bit groups needed to encode a // 33-byte compressed pubkey. Note that the last group will be padded // with zeroes. pubKeyBase32Len = 53 // hopHintLen is the number of bytes needed to encode the hop hint of a // single private route. hopHintLen = 51 // The following byte values correspond to the supported field types. // The field name is the character representing that 5-bit value in the // bech32 string. // fieldTypeP is the field containing the payment hash. fieldTypeP = 1 // fieldTypeD contains a short description of the payment. fieldTypeD = 13 // fieldTypeN contains the pubkey of the target node. fieldTypeN = 19 // fieldTypeH contains the hash of a description of the payment. fieldTypeH = 23 // fieldTypeX contains the expiry in seconds of the invoice. fieldTypeX = 6 // fieldTypeF contains a fallback on-chain address. fieldTypeF = 9 // fieldTypeR contains extra routing information. fieldTypeR = 3 // fieldTypeC contains an optional requested final CLTV delta. fieldTypeC = 24 // fieldType9 contains one or more bytes for signaling features // supported or required by the receiver. fieldType9 = 5 // fieldTypeS contains a 32-byte payment address, which is a nonce // included in the final hop's payload to prevent intermediaries from // probing the recipient. fieldTypeS = 16 // maxInvoiceLength is the maximum total length an invoice can have. // This is chosen to be the maximum number of bytes that can fit into a // single QR code: https://en.wikipedia.org/wiki/QR_code#Storage maxInvoiceLength = 7089 // DefaultInvoiceExpiry is the default expiry duration from the creation // timestamp if expiry is set to zero. DefaultInvoiceExpiry = time.Hour ) var ( // ErrInvoiceTooLarge is returned when an invoice exceeds // maxInvoiceLength. ErrInvoiceTooLarge = errors.New("invoice is too large") // ErrInvalidFieldLength is returned when a tagged field was specified // with a length larger than the left over bytes of the data field. ErrInvalidFieldLength = errors.New("invalid field length") // ErrBrokenTaggedField is returned when the last tagged field is // incorrectly formatted and doesn't have enough bytes to be read. ErrBrokenTaggedField = errors.New("last tagged field is broken") ) // MessageSigner is passed to the Encode method to provide a signature // corresponding to the node's pubkey. type MessageSigner struct { // SignCompact signs the passed hash with the node's privkey. The // returned signature should be 65 bytes, where the last 64 are the // compact signature, and the first one is a header byte. This is the // format returned by btcec.SignCompact. SignCompact func(hash []byte) ([]byte, error) } // Invoice represents a decoded invoice, or to-be-encoded invoice. Some of the // fields are optional, and will only be non-nil if the invoice this was parsed // from contains that field. When encoding, only the non-nil fields will be // added to the encoded invoice. type Invoice struct { // Net specifies what network this Lightning invoice is meant for. Net *chaincfg.Params // MilliSat specifies the amount of this invoice in millisatoshi. // Optional. MilliSat *lnwire.MilliSatoshi // Timestamp specifies the time this invoice was created. // Mandatory Timestamp time.Time // PaymentHash is the payment hash to be used for a payment to this // invoice. PaymentHash *[32]byte // PaymentAddr is the payment address to be used by payments to prevent // probing of the destination. PaymentAddr *[32]byte // Destination is the public key of the target node. This will always // be set after decoding, and can optionally be set before encoding to // include the pubkey as an 'n' field. If this is not set before // encoding then the destination pubkey won't be added as an 'n' field, // and the pubkey will be extracted from the signature during decoding. Destination *btcec.PublicKey // minFinalCLTVExpiry is the value that the creator of the invoice // expects to be used for the CLTV expiry of the HTLC extended to it in // the last hop. // // NOTE: This value is optional, and should be set to nil if the // invoice creator doesn't have a strong requirement on the CLTV expiry // of the final HTLC extended to it. // // This field is un-exported and can only be read by the // MinFinalCLTVExpiry() method. By forcing callers to read via this // method, we can easily enforce the default if not specified. minFinalCLTVExpiry *uint64 // Description is a short description of the purpose of this invoice. // Optional. Non-nil iff DescriptionHash is nil. Description *string // DescriptionHash is the SHA256 hash of a description of the purpose of // this invoice. // Optional. Non-nil iff Description is nil. DescriptionHash *[32]byte // expiry specifies the timespan this invoice will be valid. // Optional. If not set, a default expiry of 60 min will be implied. // // This field is unexported and can be read by the Expiry() method. This // method makes sure the default expiry time is returned in case the // field is not set. expiry *time.Duration // FallbackAddr is an on-chain address that can be used for payment in // case the Lightning payment fails. // Optional. FallbackAddr btcutil.Address // RouteHints represents one or more different route hints. Each route // hint can be individually used to reach the destination. These usually // represent private routes. // // NOTE: This is optional. RouteHints [][]HopHint // Features represents an optional field used to signal optional or // required support for features by the receiver. Features *lnwire.FeatureVector } // Amount is a functional option that allows callers of NewInvoice to set the // amount in millisatoshis that the Invoice should encode. func Amount(milliSat lnwire.MilliSatoshi) func(*Invoice) { return func(i *Invoice) { i.MilliSat = &milliSat } } // Destination is a functional option that allows callers of NewInvoice to // explicitly set the pubkey of the Invoice's destination node. func Destination(destination *btcec.PublicKey) func(*Invoice) { return func(i *Invoice) { i.Destination = destination } } // Description is a functional option that allows callers of NewInvoice to set // the payment description of the created Invoice. // // NOTE: Must be used if and only if DescriptionHash is not used. func Description(description string) func(*Invoice) { return func(i *Invoice) { i.Description = &description } } // CLTVExpiry is an optional value which allows the receiver of the payment to // specify the delta between the current height and the HTLC extended to the // receiver. func CLTVExpiry(delta uint64) func(*Invoice) { return func(i *Invoice) { i.minFinalCLTVExpiry = &delta } } // DescriptionHash is a functional option that allows callers of NewInvoice to // set the payment description hash of the created Invoice. // // NOTE: Must be used if and only if Description is not used. func DescriptionHash(descriptionHash [32]byte) func(*Invoice) { return func(i *Invoice) { i.DescriptionHash = &descriptionHash } } // Expiry is a functional option that allows callers of NewInvoice to set the // expiry of the created Invoice. If not set, a default expiry of 60 min will // be implied. func Expiry(expiry time.Duration) func(*Invoice) { return func(i *Invoice) { i.expiry = &expiry } } // FallbackAddr is a functional option that allows callers of NewInvoice to set // the Invoice's fallback on-chain address that can be used for payment in case // the Lightning payment fails func FallbackAddr(fallbackAddr btcutil.Address) func(*Invoice) { return func(i *Invoice) { i.FallbackAddr = fallbackAddr } } // RouteHint is a functional option that allows callers of NewInvoice to add // one or more hop hints that represent a private route to the destination. func RouteHint(routeHint []HopHint) func(*Invoice) { return func(i *Invoice) { i.RouteHints = append(i.RouteHints, routeHint) } } // Features is a functional option that allows callers of NewInvoice to set the // desired feature bits that are advertised on the invoice. If this option is // not used, an empty feature vector will automatically be populated. func Features(features *lnwire.FeatureVector) func(*Invoice) { return func(i *Invoice) { i.Features = features } } // PaymentAddr is a functional option that allows callers of NewInvoice to set // the desired payment address tht is advertised on the invoice. func PaymentAddr(addr [32]byte) func(*Invoice) { return func(i *Invoice) { i.PaymentAddr = &addr } } // NewInvoice creates a new Invoice object. The last parameter is a set of // variadic arguments for setting optional fields of the invoice. // // NOTE: Either Description or DescriptionHash must be provided for the Invoice // to be considered valid. func NewInvoice(net *chaincfg.Params, paymentHash [32]byte, timestamp time.Time, options ...func(*Invoice)) (*Invoice, error) { invoice := &Invoice{ Net: net, PaymentHash: &paymentHash, Timestamp: timestamp, } for _, option := range options { option(invoice) } // If no features were set, we'll populate an empty feature vector. if invoice.Features == nil { invoice.Features = lnwire.NewFeatureVector( nil, lnwire.Features, ) } if err := validateInvoice(invoice); err != nil { return nil, err } return invoice, nil } // Expiry returns the expiry time for this invoice. If expiry time is not set // explicitly, the default 3600 second expiry will be returned. func (invoice *Invoice) Expiry() time.Duration { if invoice.expiry != nil { return *invoice.expiry } // If no expiry is set for this invoice, default is 3600 seconds. return DefaultInvoiceExpiry } // MinFinalCLTVExpiry returns the minimum final CLTV expiry delta as specified // by the creator of the invoice. This value specifies the delta between the // current height and the expiry height of the HTLC extended in the last hop. func (invoice *Invoice) MinFinalCLTVExpiry() uint64 { if invoice.minFinalCLTVExpiry != nil { return *invoice.minFinalCLTVExpiry } return DefaultFinalCLTVDelta } // validateInvoice does a sanity check of the provided Invoice, making sure it // has all the necessary fields set for it to be considered valid by BOLT-0011. func validateInvoice(invoice *Invoice) error { // The net must be set. if invoice.Net == nil { return fmt.Errorf("net params not set") } // The invoice must contain a payment hash. if invoice.PaymentHash == nil { return fmt.Errorf("no payment hash found") } // Either Description or DescriptionHash must be set, not both. if invoice.Description != nil && invoice.DescriptionHash != nil { return fmt.Errorf("both description and description hash set") } if invoice.Description == nil && invoice.DescriptionHash == nil { return fmt.Errorf("neither description nor description hash set") } // Check that we support the field lengths. if len(invoice.PaymentHash) != 32 { return fmt.Errorf("unsupported payment hash length: %d", len(invoice.PaymentHash)) } if invoice.DescriptionHash != nil && len(invoice.DescriptionHash) != 32 { return fmt.Errorf("unsupported description hash length: %d", len(invoice.DescriptionHash)) } if invoice.Destination != nil && len(invoice.Destination.SerializeCompressed()) != 33 { return fmt.Errorf("unsupported pubkey length: %d", len(invoice.Destination.SerializeCompressed())) } // Ensure that all invoices have feature vectors. if invoice.Features == nil { return fmt.Errorf("missing feature vector") } return nil }