package lnd import ( "bytes" "context" "crypto/tls" "encoding/hex" "errors" "fmt" "io" "math" "net/http" "runtime" "sort" "strings" "sync" "sync/atomic" "time" "github.com/btcsuite/btcd/blockchain" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/btcsuite/btcd/txscript" "github.com/btcsuite/btcd/wire" "github.com/btcsuite/btcutil" "github.com/btcsuite/btcutil/psbt" "github.com/btcsuite/btcwallet/wallet/txauthor" "github.com/davecgh/go-spew/spew" grpc_middleware "github.com/grpc-ecosystem/go-grpc-middleware" proxy "github.com/grpc-ecosystem/grpc-gateway/runtime" "github.com/lightningnetwork/lnd/autopilot" "github.com/lightningnetwork/lnd/build" "github.com/lightningnetwork/lnd/chanacceptor" "github.com/lightningnetwork/lnd/chanbackup" "github.com/lightningnetwork/lnd/chanfitness" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/channeldb/kvdb" "github.com/lightningnetwork/lnd/channelnotifier" "github.com/lightningnetwork/lnd/contractcourt" "github.com/lightningnetwork/lnd/discovery" "github.com/lightningnetwork/lnd/feature" "github.com/lightningnetwork/lnd/htlcswitch" "github.com/lightningnetwork/lnd/input" "github.com/lightningnetwork/lnd/invoices" "github.com/lightningnetwork/lnd/keychain" "github.com/lightningnetwork/lnd/lncfg" "github.com/lightningnetwork/lnd/lnrpc" "github.com/lightningnetwork/lnd/lnrpc/invoicesrpc" "github.com/lightningnetwork/lnd/lnrpc/routerrpc" "github.com/lightningnetwork/lnd/lntypes" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwallet/chainfee" "github.com/lightningnetwork/lnd/lnwallet/chanfunding" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/macaroons" "github.com/lightningnetwork/lnd/monitoring" "github.com/lightningnetwork/lnd/peernotifier" "github.com/lightningnetwork/lnd/record" "github.com/lightningnetwork/lnd/routing" "github.com/lightningnetwork/lnd/routing/route" "github.com/lightningnetwork/lnd/signal" "github.com/lightningnetwork/lnd/sweep" "github.com/lightningnetwork/lnd/watchtower" "github.com/lightningnetwork/lnd/zpay32" "github.com/tv42/zbase32" "google.golang.org/grpc" "gopkg.in/macaroon-bakery.v2/bakery" ) const ( // maxBtcPaymentMSat is the maximum allowed Bitcoin payment currently // permitted as defined in BOLT-0002. maxBtcPaymentMSat = lnwire.MilliSatoshi(math.MaxUint32) // maxLtcPaymentMSat is the maximum allowed Litecoin payment currently // permitted. maxLtcPaymentMSat = lnwire.MilliSatoshi(math.MaxUint32) * btcToLtcConversionRate ) var ( // MaxPaymentMSat is the maximum allowed payment currently permitted as // defined in BOLT-002. This value depends on which chain is active. // It is set to the value under the Bitcoin chain as default. MaxPaymentMSat = maxBtcPaymentMSat // defaultAcceptorTimeout is the time after which an RPCAcceptor will time // out and return false if it hasn't yet received a response. // // TODO: Make this configurable defaultAcceptorTimeout = 15 * time.Second // readPermissions is a slice of all entities that allow read // permissions for authorization purposes, all lowercase. readPermissions = []bakery.Op{ { Entity: "onchain", Action: "read", }, { Entity: "offchain", Action: "read", }, { Entity: "address", Action: "read", }, { Entity: "message", Action: "read", }, { Entity: "peers", Action: "read", }, { Entity: "info", Action: "read", }, { Entity: "invoices", Action: "read", }, { Entity: "signer", Action: "read", }, } // writePermissions is a slice of all entities that allow write // permissions for authorization purposes, all lowercase. writePermissions = []bakery.Op{ { Entity: "onchain", Action: "write", }, { Entity: "offchain", Action: "write", }, { Entity: "address", Action: "write", }, { Entity: "message", Action: "write", }, { Entity: "peers", Action: "write", }, { Entity: "info", Action: "write", }, { Entity: "invoices", Action: "write", }, { Entity: "signer", Action: "generate", }, { Entity: "macaroon", Action: "generate", }, } // invoicePermissions is a slice of all the entities that allows a user // to only access calls that are related to invoices, so: streaming // RPCs, generating, and listening invoices. invoicePermissions = []bakery.Op{ { Entity: "invoices", Action: "read", }, { Entity: "invoices", Action: "write", }, { Entity: "address", Action: "read", }, { Entity: "address", Action: "write", }, { Entity: "onchain", Action: "read", }, } // TODO(guggero): Refactor into constants that are used for all // permissions in this file. Also expose the list of possible // permissions in an RPC when per RPC permissions are // implemented. validActions = []string{"read", "write", "generate"} validEntities = []string{ "onchain", "offchain", "address", "message", "peers", "info", "invoices", "signer", "macaroon", } ) // stringInSlice returns true if a string is contained in the given slice. func stringInSlice(a string, slice []string) bool { for _, b := range slice { if b == a { return true } } return false } // mainRPCServerPermissions returns a mapping of the main RPC server calls to // the permissions they require. func mainRPCServerPermissions() map[string][]bakery.Op { return map[string][]bakery.Op{ "/lnrpc.Lightning/SendCoins": {{ Entity: "onchain", Action: "write", }}, "/lnrpc.Lightning/ListUnspent": {{ Entity: "onchain", Action: "read", }}, "/lnrpc.Lightning/SendMany": {{ Entity: "onchain", Action: "write", }}, "/lnrpc.Lightning/NewAddress": {{ Entity: "address", Action: "write", }}, "/lnrpc.Lightning/SignMessage": {{ Entity: "message", Action: "write", }}, "/lnrpc.Lightning/VerifyMessage": {{ Entity: "message", Action: "read", }}, "/lnrpc.Lightning/ConnectPeer": {{ Entity: "peers", Action: "write", }}, "/lnrpc.Lightning/DisconnectPeer": {{ Entity: "peers", Action: "write", }}, "/lnrpc.Lightning/OpenChannel": {{ Entity: "onchain", Action: "write", }, { Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/OpenChannelSync": {{ Entity: "onchain", Action: "write", }, { Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/CloseChannel": {{ Entity: "onchain", Action: "write", }, { Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/AbandonChannel": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/GetInfo": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/ListPeers": {{ Entity: "peers", Action: "read", }}, "/lnrpc.Lightning/WalletBalance": {{ Entity: "onchain", Action: "read", }}, "/lnrpc.Lightning/EstimateFee": {{ Entity: "onchain", Action: "read", }}, "/lnrpc.Lightning/ChannelBalance": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/PendingChannels": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/ListChannels": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/SubscribeChannelEvents": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/ClosedChannels": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/SendPayment": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/SendPaymentSync": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/SendToRoute": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/SendToRouteSync": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/AddInvoice": {{ Entity: "invoices", Action: "write", }}, "/lnrpc.Lightning/LookupInvoice": {{ Entity: "invoices", Action: "read", }}, "/lnrpc.Lightning/ListInvoices": {{ Entity: "invoices", Action: "read", }}, "/lnrpc.Lightning/SubscribeInvoices": {{ Entity: "invoices", Action: "read", }}, "/lnrpc.Lightning/SubscribeTransactions": {{ Entity: "onchain", Action: "read", }}, "/lnrpc.Lightning/GetTransactions": {{ Entity: "onchain", Action: "read", }}, "/lnrpc.Lightning/DescribeGraph": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/GetNodeMetrics": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/GetChanInfo": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/GetNodeInfo": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/QueryRoutes": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/GetNetworkInfo": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/StopDaemon": {{ Entity: "info", Action: "write", }}, "/lnrpc.Lightning/SubscribeChannelGraph": {{ Entity: "info", Action: "read", }}, "/lnrpc.Lightning/ListPayments": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/DeleteAllPayments": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/DebugLevel": {{ Entity: "info", Action: "write", }}, "/lnrpc.Lightning/DecodePayReq": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/FeeReport": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/UpdateChannelPolicy": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/ForwardingHistory": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/RestoreChannelBackups": {{ Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/ExportChannelBackup": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/VerifyChanBackup": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/ExportAllChannelBackups": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/SubscribeChannelBackups": {{ Entity: "offchain", Action: "read", }}, "/lnrpc.Lightning/ChannelAcceptor": {{ Entity: "onchain", Action: "write", }, { Entity: "offchain", Action: "write", }}, "/lnrpc.Lightning/BakeMacaroon": {{ Entity: "macaroon", Action: "generate", }}, "/lnrpc.Lightning/SubscribePeerEvents": {{ Entity: "peers", Action: "read", }}, "/lnrpc.Lightning/FundingStateStep": {{ Entity: "onchain", Action: "write", }, { Entity: "offchain", Action: "write", }}, } } // rpcServer is a gRPC, RPC front end to the lnd daemon. // TODO(roasbeef): pagination support for the list-style calls type rpcServer struct { started int32 // To be used atomically. shutdown int32 // To be used atomically. server *server // subServers are a set of sub-RPC servers that use the same gRPC and // listening sockets as the main RPC server, but which maintain their // own independent service. This allows us to expose a set of // micro-service like abstractions to the outside world for users to // consume. subServers []lnrpc.SubServer // grpcServer is the main gRPC server that this RPC server, and all the // sub-servers will use to register themselves and accept client // requests from. grpcServer *grpc.Server // listeners is a list of listeners to use when starting the grpc // server. We make it configurable such that the grpc server can listen // on custom interfaces. listeners []*ListenerWithSignal // listenerCleanUp are a set of closures functions that will allow this // main RPC server to clean up all the listening socket created for the // server. listenerCleanUp []func() // restDialOpts are a set of gRPC dial options that the REST server // proxy will use to connect to the main gRPC server. restDialOpts []grpc.DialOption // restProxyDest is the address to forward REST requests to. restProxyDest string // tlsCfg is the TLS config that allows the REST server proxy to // connect to the main gRPC server to proxy all incoming requests. tlsCfg *tls.Config // routerBackend contains the backend implementation of the router // rpc sub server. routerBackend *routerrpc.RouterBackend // chanPredicate is used in the bidirectional ChannelAcceptor streaming // method. chanPredicate *chanacceptor.ChainedAcceptor quit chan struct{} // macService is the macaroon service that we need to mint new // macaroons. macService *macaroons.Service // selfNode is our own pubkey. selfNode route.Vertex } // A compile time check to ensure that rpcServer fully implements the // LightningServer gRPC service. var _ lnrpc.LightningServer = (*rpcServer)(nil) // newRPCServer creates and returns a new instance of the rpcServer. The // rpcServer will handle creating all listening sockets needed by it, and any // of the sub-servers that it maintains. The set of serverOpts should be the // base level options passed to the grPC server. This typically includes things // like requiring TLS, etc. func newRPCServer(s *server, macService *macaroons.Service, subServerCgs *subRPCServerConfigs, serverOpts []grpc.ServerOption, restDialOpts []grpc.DialOption, restProxyDest string, atpl *autopilot.Manager, invoiceRegistry *invoices.InvoiceRegistry, tower *watchtower.Standalone, tlsCfg *tls.Config, getListeners rpcListeners, chanPredicate *chanacceptor.ChainedAcceptor) (*rpcServer, error) { // Set up router rpc backend. channelGraph := s.chanDB.ChannelGraph() selfNode, err := channelGraph.SourceNode() if err != nil { return nil, err } graph := s.chanDB.ChannelGraph() routerBackend := &routerrpc.RouterBackend{ MaxPaymentMSat: MaxPaymentMSat, SelfNode: selfNode.PubKeyBytes, FetchChannelCapacity: func(chanID uint64) (btcutil.Amount, error) { info, _, _, err := graph.FetchChannelEdgesByID(chanID) if err != nil { return 0, err } return info.Capacity, nil }, FetchChannelEndpoints: func(chanID uint64) (route.Vertex, route.Vertex, error) { info, _, _, err := graph.FetchChannelEdgesByID( chanID, ) if err != nil { return route.Vertex{}, route.Vertex{}, fmt.Errorf("unable to fetch channel "+ "edges by channel ID %d: %v", chanID, err) } return info.NodeKey1Bytes, info.NodeKey2Bytes, nil }, FindRoute: s.chanRouter.FindRoute, MissionControl: s.missionControl, ActiveNetParams: activeNetParams.Params, Tower: s.controlTower, MaxTotalTimelock: cfg.MaxOutgoingCltvExpiry, DefaultFinalCltvDelta: uint16(cfg.Bitcoin.TimeLockDelta), SubscribeHtlcEvents: s.htlcNotifier.SubscribeHtlcEvents, } genInvoiceFeatures := func() *lnwire.FeatureVector { return s.featureMgr.Get(feature.SetInvoice) } var ( subServers []lnrpc.SubServer subServerPerms []lnrpc.MacaroonPerms ) // Before we create any of the sub-servers, we need to ensure that all // the dependencies they need are properly populated within each sub // server configuration struct. err = subServerCgs.PopulateDependencies( s.cc, networkDir, macService, atpl, invoiceRegistry, s.htlcSwitch, activeNetParams.Params, s.chanRouter, routerBackend, s.nodeSigner, s.chanDB, s.sweeper, tower, s.towerClient, cfg.net.ResolveTCPAddr, genInvoiceFeatures, ) if err != nil { return nil, err } // Now that the sub-servers have all their dependencies in place, we // can create each sub-server! registeredSubServers := lnrpc.RegisteredSubServers() for _, subServer := range registeredSubServers { subServerInstance, macPerms, err := subServer.New(subServerCgs) if err != nil { return nil, err } // We'll collect the sub-server, and also the set of // permissions it needs for macaroons so we can apply the // interceptors below. subServers = append(subServers, subServerInstance) subServerPerms = append(subServerPerms, macPerms) } // Next, we need to merge the set of sub server macaroon permissions // with the main RPC server permissions so we can unite them under a // single set of interceptors. permissions := mainRPCServerPermissions() for _, subServerPerm := range subServerPerms { for method, ops := range subServerPerm { // For each new method:ops combo, we also ensure that // non of the sub-servers try to override each other. if _, ok := permissions[method]; ok { return nil, fmt.Errorf("detected duplicate "+ "macaroon constraints for path: %v", method) } permissions[method] = ops } } // If macaroons aren't disabled (a non-nil service), then we'll set up // our set of interceptors which will allow us to handle the macaroon // authentication in a single location. macUnaryInterceptors := []grpc.UnaryServerInterceptor{} macStrmInterceptors := []grpc.StreamServerInterceptor{} if macService != nil { unaryInterceptor := macService.UnaryServerInterceptor(permissions) macUnaryInterceptors = append(macUnaryInterceptors, unaryInterceptor) strmInterceptor := macService.StreamServerInterceptor(permissions) macStrmInterceptors = append(macStrmInterceptors, strmInterceptor) } // Get interceptors for Prometheus to gather gRPC performance metrics. // If monitoring is disabled, GetPromInterceptors() will return empty // slices. promUnaryInterceptors, promStrmInterceptors := monitoring.GetPromInterceptors() // Concatenate the slices of unary and stream interceptors respectively. unaryInterceptors := append(macUnaryInterceptors, promUnaryInterceptors...) strmInterceptors := append(macStrmInterceptors, promStrmInterceptors...) // We'll also add our logging interceptors as well, so we can // automatically log all errors that happen during RPC calls. unaryInterceptors = append( unaryInterceptors, errorLogUnaryServerInterceptor(rpcsLog), ) strmInterceptors = append( strmInterceptors, errorLogStreamServerInterceptor(rpcsLog), ) // Get the listeners and server options to use for this rpc server. listeners, cleanup, err := getListeners() if err != nil { return nil, err } // If any interceptors have been set up, add them to the server options. if len(unaryInterceptors) != 0 && len(strmInterceptors) != 0 { chainedUnary := grpc_middleware.WithUnaryServerChain( unaryInterceptors..., ) chainedStream := grpc_middleware.WithStreamServerChain( strmInterceptors..., ) serverOpts = append(serverOpts, chainedUnary, chainedStream) } // Finally, with all the pre-set up complete, we can create the main // gRPC server, and register the main lnrpc server along side. grpcServer := grpc.NewServer(serverOpts...) rootRPCServer := &rpcServer{ restDialOpts: restDialOpts, listeners: listeners, listenerCleanUp: []func(){cleanup}, restProxyDest: restProxyDest, subServers: subServers, tlsCfg: tlsCfg, grpcServer: grpcServer, server: s, routerBackend: routerBackend, chanPredicate: chanPredicate, quit: make(chan struct{}, 1), macService: macService, selfNode: selfNode.PubKeyBytes, } lnrpc.RegisterLightningServer(grpcServer, rootRPCServer) // Now the main RPC server has been registered, we'll iterate through // all the sub-RPC servers and register them to ensure that requests // are properly routed towards them. for _, subServer := range subServers { err := subServer.RegisterWithRootServer(grpcServer) if err != nil { return nil, fmt.Errorf("unable to register "+ "sub-server %v with root: %v", subServer.Name(), err) } } return rootRPCServer, nil } // Start launches any helper goroutines required for the rpcServer to function. func (r *rpcServer) Start() error { if atomic.AddInt32(&r.started, 1) != 1 { return nil } // First, we'll start all the sub-servers to ensure that they're ready // to take new requests in. // // TODO(roasbeef): some may require that the entire daemon be started // at that point for _, subServer := range r.subServers { rpcsLog.Debugf("Starting sub RPC server: %v", subServer.Name()) if err := subServer.Start(); err != nil { return err } } // With all the sub-servers started, we'll spin up the listeners for // the main RPC server itself. for _, lis := range r.listeners { go func(lis *ListenerWithSignal) { rpcsLog.Infof("RPC server listening on %s", lis.Addr()) // Close the ready chan to indicate we are listening. close(lis.Ready) r.grpcServer.Serve(lis) }(lis) } // If Prometheus monitoring is enabled, start the Prometheus exporter. if cfg.Prometheus.Enabled() { err := monitoring.ExportPrometheusMetrics( r.grpcServer, cfg.Prometheus, ) if err != nil { return err } } // The default JSON marshaler of the REST proxy only sets OrigName to // true, which instructs it to use the same field names as specified in // the proto file and not switch to camel case. What we also want is // that the marshaler prints all values, even if they are falsey. customMarshalerOption := proxy.WithMarshalerOption( proxy.MIMEWildcard, &proxy.JSONPb{ OrigName: true, EmitDefaults: true, }, ) // Finally, start the REST proxy for our gRPC server above. We'll ensure // we direct LND to connect to its loopback address rather than a // wildcard to prevent certificate issues when accessing the proxy // externally. // // TODO(roasbeef): eventually also allow the sub-servers to themselves // have a REST proxy. mux := proxy.NewServeMux(customMarshalerOption) err := lnrpc.RegisterLightningHandlerFromEndpoint( context.Background(), mux, r.restProxyDest, r.restDialOpts, ) if err != nil { return err } for _, restEndpoint := range cfg.RESTListeners { lis, err := lncfg.TLSListenOnAddress(restEndpoint, r.tlsCfg) if err != nil { ltndLog.Errorf( "gRPC proxy unable to listen on %s", restEndpoint, ) return err } r.listenerCleanUp = append(r.listenerCleanUp, func() { lis.Close() }) go func() { rpcsLog.Infof("gRPC proxy started at %s", lis.Addr()) http.Serve(lis, mux) }() } return nil } // Stop signals any active goroutines for a graceful closure. func (r *rpcServer) Stop() error { if atomic.AddInt32(&r.shutdown, 1) != 1 { return nil } rpcsLog.Infof("Stopping RPC Server") close(r.quit) // After we've signalled all of our active goroutines to exit, we'll // then do the same to signal a graceful shutdown of all the sub // servers. for _, subServer := range r.subServers { rpcsLog.Infof("Stopping %v Sub-RPC Server", subServer.Name()) if err := subServer.Stop(); err != nil { rpcsLog.Errorf("unable to stop sub-server %v: %v", subServer.Name(), err) continue } } // Finally, we can clean up all the listening sockets to ensure that we // give the file descriptors back to the OS. for _, cleanUp := range r.listenerCleanUp { cleanUp() } return nil } // addrPairsToOutputs converts a map describing a set of outputs to be created, // the outputs themselves. The passed map pairs up an address, to a desired // output value amount. Each address is converted to its corresponding pkScript // to be used within the constructed output(s). func addrPairsToOutputs(addrPairs map[string]int64) ([]*wire.TxOut, error) { outputs := make([]*wire.TxOut, 0, len(addrPairs)) for addr, amt := range addrPairs { addr, err := btcutil.DecodeAddress(addr, activeNetParams.Params) if err != nil { return nil, err } pkscript, err := txscript.PayToAddrScript(addr) if err != nil { return nil, err } outputs = append(outputs, wire.NewTxOut(amt, pkscript)) } return outputs, nil } // sendCoinsOnChain makes an on-chain transaction in or to send coins to one or // more addresses specified in the passed payment map. The payment map maps an // address to a specified output value to be sent to that address. func (r *rpcServer) sendCoinsOnChain(paymentMap map[string]int64, feeRate chainfee.SatPerKWeight) (*chainhash.Hash, error) { outputs, err := addrPairsToOutputs(paymentMap) if err != nil { return nil, err } tx, err := r.server.cc.wallet.SendOutputs(outputs, feeRate) if err != nil { return nil, err } txHash := tx.TxHash() return &txHash, nil } // ListUnspent returns useful information about each unspent output owned by // the wallet, as reported by the underlying `ListUnspentWitness`; the // information returned is: outpoint, amount in satoshis, address, address // type, scriptPubKey in hex and number of confirmations. The result is // filtered to contain outputs whose number of confirmations is between a // minimum and maximum number of confirmations specified by the user, with 0 // meaning unconfirmed. func (r *rpcServer) ListUnspent(ctx context.Context, in *lnrpc.ListUnspentRequest) (*lnrpc.ListUnspentResponse, error) { minConfs := in.MinConfs maxConfs := in.MaxConfs switch { // Ensure that the user didn't attempt to specify a negative number of // confirmations, as that isn't possible. case minConfs < 0: return nil, fmt.Errorf("min confirmations must be >= 0") // We'll also ensure that the min number of confs is strictly less than // or equal to the max number of confs for sanity. case minConfs > maxConfs: return nil, fmt.Errorf("max confirmations must be >= min " + "confirmations") } // With our arguments validated, we'll query the internal wallet for // the set of UTXOs that match our query. utxos, err := r.server.cc.wallet.ListUnspentWitness(minConfs, maxConfs) if err != nil { return nil, err } resp := &lnrpc.ListUnspentResponse{ Utxos: make([]*lnrpc.Utxo, 0, len(utxos)), } for _, utxo := range utxos { // Translate lnwallet address type to the proper gRPC proto // address type. var addrType lnrpc.AddressType switch utxo.AddressType { case lnwallet.WitnessPubKey: addrType = lnrpc.AddressType_WITNESS_PUBKEY_HASH case lnwallet.NestedWitnessPubKey: addrType = lnrpc.AddressType_NESTED_PUBKEY_HASH case lnwallet.UnknownAddressType: rpcsLog.Warnf("[listunspent] utxo with address of "+ "unknown type ignored: %v", utxo.OutPoint.String()) continue default: return nil, fmt.Errorf("invalid utxo address type") } // Now that we know we have a proper mapping to an address, // we'll convert the regular outpoint to an lnrpc variant. outpoint := &lnrpc.OutPoint{ TxidBytes: utxo.OutPoint.Hash[:], TxidStr: utxo.OutPoint.Hash.String(), OutputIndex: utxo.OutPoint.Index, } utxoResp := lnrpc.Utxo{ AddressType: addrType, AmountSat: int64(utxo.Value), PkScript: hex.EncodeToString(utxo.PkScript), Outpoint: outpoint, Confirmations: utxo.Confirmations, } // Finally, we'll attempt to extract the raw address from the // script so we can display a human friendly address to the end // user. _, outAddresses, _, err := txscript.ExtractPkScriptAddrs( utxo.PkScript, activeNetParams.Params, ) if err != nil { return nil, err } // If we can't properly locate a single address, then this was // an error in our mapping, and we'll return an error back to // the user. if len(outAddresses) != 1 { return nil, fmt.Errorf("an output was unexpectedly " + "multisig") } utxoResp.Address = outAddresses[0].String() resp.Utxos = append(resp.Utxos, &utxoResp) } maxStr := "" if maxConfs != math.MaxInt32 { maxStr = " max=" + fmt.Sprintf("%d", maxConfs) } rpcsLog.Debugf("[listunspent] min=%v%v, generated utxos: %v", minConfs, maxStr, utxos) return resp, nil } // EstimateFee handles a request for estimating the fee for sending a // transaction spending to multiple specified outputs in parallel. func (r *rpcServer) EstimateFee(ctx context.Context, in *lnrpc.EstimateFeeRequest) (*lnrpc.EstimateFeeResponse, error) { // Create the list of outputs we are spending to. outputs, err := addrPairsToOutputs(in.AddrToAmount) if err != nil { return nil, err } // Query the fee estimator for the fee rate for the given confirmation // target. target := in.TargetConf feePerKw, err := sweep.DetermineFeePerKw( r.server.cc.feeEstimator, sweep.FeePreference{ ConfTarget: uint32(target), }, ) if err != nil { return nil, err } // We will ask the wallet to create a tx using this fee rate. We set // dryRun=true to avoid inflating the change addresses in the db. var tx *txauthor.AuthoredTx wallet := r.server.cc.wallet err = wallet.WithCoinSelectLock(func() error { tx, err = wallet.CreateSimpleTx(outputs, feePerKw, true) return err }) if err != nil { return nil, err } // Use the created tx to calculate the total fee. totalOutput := int64(0) for _, out := range tx.Tx.TxOut { totalOutput += out.Value } totalFee := int64(tx.TotalInput) - totalOutput resp := &lnrpc.EstimateFeeResponse{ FeeSat: totalFee, FeerateSatPerByte: int64(feePerKw.FeePerKVByte() / 1000), } rpcsLog.Debugf("[estimatefee] fee estimate for conf target %d: %v", target, resp) return resp, nil } // SendCoins executes a request to send coins to a particular address. Unlike // SendMany, this RPC call only allows creating a single output at a time. func (r *rpcServer) SendCoins(ctx context.Context, in *lnrpc.SendCoinsRequest) (*lnrpc.SendCoinsResponse, error) { // Based on the passed fee related parameters, we'll determine an // appropriate fee rate for this transaction. satPerKw := chainfee.SatPerKVByte(in.SatPerByte * 1000).FeePerKWeight() feePerKw, err := sweep.DetermineFeePerKw( r.server.cc.feeEstimator, sweep.FeePreference{ ConfTarget: uint32(in.TargetConf), FeeRate: satPerKw, }, ) if err != nil { return nil, err } rpcsLog.Infof("[sendcoins] addr=%v, amt=%v, sat/kw=%v, sweep_all=%v", in.Addr, btcutil.Amount(in.Amount), int64(feePerKw), in.SendAll) // Decode the address receiving the coins, we need to check whether the // address is valid for this network. targetAddr, err := btcutil.DecodeAddress(in.Addr, activeNetParams.Params) if err != nil { return nil, err } // Make the check on the decoded address according to the active network. if !targetAddr.IsForNet(activeNetParams.Params) { return nil, fmt.Errorf("address: %v is not valid for this "+ "network: %v", targetAddr.String(), activeNetParams.Params.Name) } // If the destination address parses to a valid pubkey, we assume the user // accidentally tried to send funds to a bare pubkey address. This check is // here to prevent unintended transfers. decodedAddr, _ := hex.DecodeString(in.Addr) _, err = btcec.ParsePubKey(decodedAddr, btcec.S256()) if err == nil { return nil, fmt.Errorf("cannot send coins to pubkeys") } var txid *chainhash.Hash wallet := r.server.cc.wallet // If the send all flag is active, then we'll attempt to sweep all the // coins in the wallet in a single transaction (if possible), // otherwise, we'll respect the amount, and attempt a regular 2-output // send. if in.SendAll { // At this point, the amount shouldn't be set since we've been // instructed to sweep all the coins from the wallet. if in.Amount != 0 { return nil, fmt.Errorf("amount set while SendAll is " + "active") } _, bestHeight, err := r.server.cc.chainIO.GetBestBlock() if err != nil { return nil, err } // With the sweeper instance created, we can now generate a // transaction that will sweep ALL outputs from the wallet in a // single transaction. This will be generated in a concurrent // safe manner, so no need to worry about locking. sweepTxPkg, err := sweep.CraftSweepAllTx( feePerKw, uint32(bestHeight), targetAddr, wallet, wallet.WalletController, wallet.WalletController, r.server.cc.feeEstimator, r.server.cc.signer, ) if err != nil { return nil, err } rpcsLog.Debugf("Sweeping all coins from wallet to addr=%v, "+ "with tx=%v", in.Addr, spew.Sdump(sweepTxPkg.SweepTx)) // As our sweep transaction was created, successfully, we'll // now attempt to publish it, cancelling the sweep pkg to // return all outputs if it fails. err = wallet.PublishTransaction(sweepTxPkg.SweepTx) if err != nil { sweepTxPkg.CancelSweepAttempt() return nil, fmt.Errorf("unable to broadcast sweep "+ "transaction: %v", err) } sweepTXID := sweepTxPkg.SweepTx.TxHash() txid = &sweepTXID } else { // We'll now construct out payment map, and use the wallet's // coin selection synchronization method to ensure that no coin // selection (funding, sweep alls, other sends) can proceed // while we instruct the wallet to send this transaction. paymentMap := map[string]int64{targetAddr.String(): in.Amount} err := wallet.WithCoinSelectLock(func() error { newTXID, err := r.sendCoinsOnChain(paymentMap, feePerKw) if err != nil { return err } txid = newTXID return nil }) if err != nil { return nil, err } } rpcsLog.Infof("[sendcoins] spend generated txid: %v", txid.String()) return &lnrpc.SendCoinsResponse{Txid: txid.String()}, nil } // SendMany handles a request for a transaction create multiple specified // outputs in parallel. func (r *rpcServer) SendMany(ctx context.Context, in *lnrpc.SendManyRequest) (*lnrpc.SendManyResponse, error) { // Based on the passed fee related parameters, we'll determine an // appropriate fee rate for this transaction. satPerKw := chainfee.SatPerKVByte(in.SatPerByte * 1000).FeePerKWeight() feePerKw, err := sweep.DetermineFeePerKw( r.server.cc.feeEstimator, sweep.FeePreference{ ConfTarget: uint32(in.TargetConf), FeeRate: satPerKw, }, ) if err != nil { return nil, err } rpcsLog.Infof("[sendmany] outputs=%v, sat/kw=%v", spew.Sdump(in.AddrToAmount), int64(feePerKw)) var txid *chainhash.Hash // We'll attempt to send to the target set of outputs, ensuring that we // synchronize with any other ongoing coin selection attempts which // happen to also be concurrently executing. wallet := r.server.cc.wallet err = wallet.WithCoinSelectLock(func() error { sendManyTXID, err := r.sendCoinsOnChain( in.AddrToAmount, feePerKw, ) if err != nil { return err } txid = sendManyTXID return nil }) if err != nil { return nil, err } rpcsLog.Infof("[sendmany] spend generated txid: %v", txid.String()) return &lnrpc.SendManyResponse{Txid: txid.String()}, nil } // NewAddress creates a new address under control of the local wallet. func (r *rpcServer) NewAddress(ctx context.Context, in *lnrpc.NewAddressRequest) (*lnrpc.NewAddressResponse, error) { // Translate the gRPC proto address type to the wallet controller's // available address types. var ( addr btcutil.Address err error ) switch in.Type { case lnrpc.AddressType_WITNESS_PUBKEY_HASH: addr, err = r.server.cc.wallet.NewAddress( lnwallet.WitnessPubKey, false, ) if err != nil { return nil, err } case lnrpc.AddressType_NESTED_PUBKEY_HASH: addr, err = r.server.cc.wallet.NewAddress( lnwallet.NestedWitnessPubKey, false, ) if err != nil { return nil, err } case lnrpc.AddressType_UNUSED_WITNESS_PUBKEY_HASH: addr, err = r.server.cc.wallet.LastUnusedAddress( lnwallet.WitnessPubKey, ) if err != nil { return nil, err } case lnrpc.AddressType_UNUSED_NESTED_PUBKEY_HASH: addr, err = r.server.cc.wallet.LastUnusedAddress( lnwallet.NestedWitnessPubKey, ) if err != nil { return nil, err } } rpcsLog.Debugf("[newaddress] type=%v addr=%v", in.Type, addr.String()) return &lnrpc.NewAddressResponse{Address: addr.String()}, nil } var ( // signedMsgPrefix is a special prefix that we'll prepend to any // messages we sign/verify. We do this to ensure that we don't // accidentally sign a sighash, or other sensitive material. By // prepending this fragment, we mind message signing to our particular // context. signedMsgPrefix = []byte("Lightning Signed Message:") ) // SignMessage signs a message with the resident node's private key. The // returned signature string is zbase32 encoded and pubkey recoverable, meaning // that only the message digest and signature are needed for verification. func (r *rpcServer) SignMessage(ctx context.Context, in *lnrpc.SignMessageRequest) (*lnrpc.SignMessageResponse, error) { if in.Msg == nil { return nil, fmt.Errorf("need a message to sign") } in.Msg = append(signedMsgPrefix, in.Msg...) sigBytes, err := r.server.nodeSigner.SignCompact(in.Msg) if err != nil { return nil, err } sig := zbase32.EncodeToString(sigBytes) return &lnrpc.SignMessageResponse{Signature: sig}, nil } // VerifyMessage verifies a signature over a msg. The signature must be zbase32 // encoded and signed by an active node in the resident node's channel // database. In addition to returning the validity of the signature, // VerifyMessage also returns the recovered pubkey from the signature. func (r *rpcServer) VerifyMessage(ctx context.Context, in *lnrpc.VerifyMessageRequest) (*lnrpc.VerifyMessageResponse, error) { if in.Msg == nil { return nil, fmt.Errorf("need a message to verify") } // The signature should be zbase32 encoded sig, err := zbase32.DecodeString(in.Signature) if err != nil { return nil, fmt.Errorf("failed to decode signature: %v", err) } // The signature is over the double-sha256 hash of the message. in.Msg = append(signedMsgPrefix, in.Msg...) digest := chainhash.DoubleHashB(in.Msg) // RecoverCompact both recovers the pubkey and validates the signature. pubKey, _, err := btcec.RecoverCompact(btcec.S256(), sig, digest) if err != nil { return &lnrpc.VerifyMessageResponse{Valid: false}, nil } pubKeyHex := hex.EncodeToString(pubKey.SerializeCompressed()) var pub [33]byte copy(pub[:], pubKey.SerializeCompressed()) // Query the channel graph to ensure a node in the network with active // channels signed the message. // // TODO(phlip9): Require valid nodes to have capital in active channels. graph := r.server.chanDB.ChannelGraph() _, active, err := graph.HasLightningNode(pub) if err != nil { return nil, fmt.Errorf("failed to query graph: %v", err) } return &lnrpc.VerifyMessageResponse{ Valid: active, Pubkey: pubKeyHex, }, nil } // ConnectPeer attempts to establish a connection to a remote peer. func (r *rpcServer) ConnectPeer(ctx context.Context, in *lnrpc.ConnectPeerRequest) (*lnrpc.ConnectPeerResponse, error) { // The server hasn't yet started, so it won't be able to service any of // our requests, so we'll bail early here. if !r.server.Started() { return nil, ErrServerNotActive } if in.Addr == nil { return nil, fmt.Errorf("need: lnc pubkeyhash@hostname") } pubkeyHex, err := hex.DecodeString(in.Addr.Pubkey) if err != nil { return nil, err } pubKey, err := btcec.ParsePubKey(pubkeyHex, btcec.S256()) if err != nil { return nil, err } // Connections to ourselves are disallowed for obvious reasons. if pubKey.IsEqual(r.server.identityPriv.PubKey()) { return nil, fmt.Errorf("cannot make connection to self") } addr, err := parseAddr(in.Addr.Host) if err != nil { return nil, err } peerAddr := &lnwire.NetAddress{ IdentityKey: pubKey, Address: addr, ChainNet: activeNetParams.Net, } rpcsLog.Debugf("[connectpeer] requested connection to %x@%s", peerAddr.IdentityKey.SerializeCompressed(), peerAddr.Address) if err := r.server.ConnectToPeer(peerAddr, in.Perm); err != nil { rpcsLog.Errorf("[connectpeer]: error connecting to peer: %v", err) return nil, err } rpcsLog.Debugf("Connected to peer: %v", peerAddr.String()) return &lnrpc.ConnectPeerResponse{}, nil } // DisconnectPeer attempts to disconnect one peer from another identified by a // given pubKey. In the case that we currently have a pending or active channel // with the target peer, this action will be disallowed. func (r *rpcServer) DisconnectPeer(ctx context.Context, in *lnrpc.DisconnectPeerRequest) (*lnrpc.DisconnectPeerResponse, error) { rpcsLog.Debugf("[disconnectpeer] from peer(%s)", in.PubKey) if !r.server.Started() { return nil, ErrServerNotActive } // First we'll validate the string passed in within the request to // ensure that it's a valid hex-string, and also a valid compressed // public key. pubKeyBytes, err := hex.DecodeString(in.PubKey) if err != nil { return nil, fmt.Errorf("unable to decode pubkey bytes: %v", err) } peerPubKey, err := btcec.ParsePubKey(pubKeyBytes, btcec.S256()) if err != nil { return nil, fmt.Errorf("unable to parse pubkey: %v", err) } // Next, we'll fetch the pending/active channels we have with a // particular peer. nodeChannels, err := r.server.chanDB.FetchOpenChannels(peerPubKey) if err != nil { return nil, fmt.Errorf("unable to fetch channels for peer: %v", err) } // In order to avoid erroneously disconnecting from a peer that we have // an active channel with, if we have any channels active with this // peer, then we'll disallow disconnecting from them. if len(nodeChannels) > 0 && !cfg.UnsafeDisconnect { return nil, fmt.Errorf("cannot disconnect from peer(%x), "+ "all active channels with the peer need to be closed "+ "first", pubKeyBytes) } // With all initial validation complete, we'll now request that the // server disconnects from the peer. if err := r.server.DisconnectPeer(peerPubKey); err != nil { return nil, fmt.Errorf("unable to disconnect peer: %v", err) } return &lnrpc.DisconnectPeerResponse{}, nil } // extractOpenChannelMinConfs extracts the minimum number of confirmations from // the OpenChannelRequest that each output used to fund the channel's funding // transaction should satisfy. func extractOpenChannelMinConfs(in *lnrpc.OpenChannelRequest) (int32, error) { switch { // Ensure that the MinConfs parameter is non-negative. case in.MinConfs < 0: return 0, errors.New("minimum number of confirmations must " + "be a non-negative number") // The funding transaction should not be funded with unconfirmed outputs // unless explicitly specified by SpendUnconfirmed. We do this to // provide sane defaults to the OpenChannel RPC, as otherwise, if the // MinConfs field isn't explicitly set by the caller, we'll use // unconfirmed outputs without the caller being aware. case in.MinConfs == 0 && !in.SpendUnconfirmed: return 1, nil // In the event that the caller set MinConfs > 0 and SpendUnconfirmed to // true, we'll return an error to indicate the conflict. case in.MinConfs > 0 && in.SpendUnconfirmed: return 0, errors.New("SpendUnconfirmed set to true with " + "MinConfs > 0") // The funding transaction of the new channel to be created can be // funded with unconfirmed outputs. case in.SpendUnconfirmed: return 0, nil // If none of the above cases matched, we'll return the value set // explicitly by the caller. default: return in.MinConfs, nil } } // newFundingShimAssembler returns a new fully populated // chanfunding.CannedAssembler using a FundingShim obtained from an RPC caller. func newFundingShimAssembler(chanPointShim *lnrpc.ChanPointShim, initiator bool, keyRing keychain.KeyRing) (chanfunding.Assembler, error) { // Perform some basic sanity checks to ensure that all the expected // fields are populated. switch { case chanPointShim.RemoteKey == nil: return nil, fmt.Errorf("remote key not set") case chanPointShim.LocalKey == nil: return nil, fmt.Errorf("local key desc not set") case chanPointShim.LocalKey.RawKeyBytes == nil: return nil, fmt.Errorf("local raw key bytes not set") case chanPointShim.LocalKey.KeyLoc == nil: return nil, fmt.Errorf("local key loc not set") case chanPointShim.ChanPoint == nil: return nil, fmt.Errorf("chan point not set") case len(chanPointShim.PendingChanId) != 32: return nil, fmt.Errorf("pending chan ID not set") } // First, we'll map the RPC's channel point to one we can actually use. index := chanPointShim.ChanPoint.OutputIndex txid, err := GetChanPointFundingTxid(chanPointShim.ChanPoint) if err != nil { return nil, err } chanPoint := wire.NewOutPoint(txid, index) // Next we'll parse out the remote party's funding key, as well as our // full key descriptor. remoteKey, err := btcec.ParsePubKey( chanPointShim.RemoteKey, btcec.S256(), ) if err != nil { return nil, err } shimKeyDesc := chanPointShim.LocalKey localKey, err := btcec.ParsePubKey( shimKeyDesc.RawKeyBytes, btcec.S256(), ) if err != nil { return nil, err } localKeyDesc := keychain.KeyDescriptor{ PubKey: localKey, KeyLocator: keychain.KeyLocator{ Family: keychain.KeyFamily( shimKeyDesc.KeyLoc.KeyFamily, ), Index: uint32(shimKeyDesc.KeyLoc.KeyIndex), }, } // Verify that if we re-derive this key according to the passed // KeyLocator, that we get the exact same key back. Otherwise, we may // end up in a situation where we aren't able to actually sign for this // newly created channel. derivedKey, err := keyRing.DeriveKey(localKeyDesc.KeyLocator) if err != nil { return nil, err } if !derivedKey.PubKey.IsEqual(localKey) { return nil, fmt.Errorf("KeyLocator does not match attached " + "raw pubkey") } // With all the parts assembled, we can now make the canned assembler // to pass into the wallet. return chanfunding.NewCannedAssembler( chanPointShim.ThawHeight, *chanPoint, btcutil.Amount(chanPointShim.Amt), &localKeyDesc, remoteKey, initiator, ), nil } // newFundingShimAssembler returns a new fully populated // chanfunding.PsbtAssembler using a FundingShim obtained from an RPC caller. func newPsbtAssembler(req *lnrpc.OpenChannelRequest, normalizedMinConfs int32, psbtShim *lnrpc.PsbtShim, netParams *chaincfg.Params) ( chanfunding.Assembler, error) { var ( packet *psbt.Packet err error ) // Perform some basic sanity checks to ensure that all the expected // fields are populated and none of the incompatible fields are. if len(psbtShim.PendingChanId) != 32 { return nil, fmt.Errorf("pending chan ID not set") } if normalizedMinConfs != 1 { return nil, fmt.Errorf("setting non-default values for " + "minimum confirmation is not supported for PSBT " + "funding") } if req.SatPerByte != 0 || req.TargetConf != 0 { return nil, fmt.Errorf("specifying fee estimation parameters " + "is not supported for PSBT funding") } // The base PSBT is optional. But if it's set, it has to be a valid, // binary serialized PSBT. if len(psbtShim.BasePsbt) > 0 { packet, err = psbt.NewFromRawBytes( bytes.NewReader(psbtShim.BasePsbt), false, ) if err != nil { return nil, fmt.Errorf("error parsing base PSBT: %v", err) } } // With all the parts assembled, we can now make the canned assembler // to pass into the wallet. return chanfunding.NewPsbtAssembler( btcutil.Amount(req.LocalFundingAmount), packet, netParams, ), nil } // canOpenChannel returns an error if the necessary subsystems for channel // funding are not ready. func (r *rpcServer) canOpenChannel() error { // We can't open a channel until the main server has started. if !r.server.Started() { return ErrServerNotActive } // Creation of channels before the wallet syncs up is currently // disallowed. isSynced, _, err := r.server.cc.wallet.IsSynced() if err != nil { return err } if !isSynced { return errors.New("channels cannot be created before the " + "wallet is fully synced") } return nil } // praseOpenChannelReq parses an OpenChannelRequest message into the server's // native openChanReq struct. The logic is abstracted so that it can be shared // between OpenChannel and OpenChannelSync. func (r *rpcServer) parseOpenChannelReq(in *lnrpc.OpenChannelRequest, isSync bool) (*openChanReq, error) { rpcsLog.Debugf("[openchannel] request to NodeKey(%x) "+ "allocation(us=%v, them=%v)", in.NodePubkey, in.LocalFundingAmount, in.PushSat) localFundingAmt := btcutil.Amount(in.LocalFundingAmount) remoteInitialBalance := btcutil.Amount(in.PushSat) minHtlcIn := lnwire.MilliSatoshi(in.MinHtlcMsat) remoteCsvDelay := uint16(in.RemoteCsvDelay) // Ensure that the initial balance of the remote party (if pushing // satoshis) does not exceed the amount the local party has requested // for funding. // // TODO(roasbeef): incorporate base fee? if remoteInitialBalance >= localFundingAmt { return nil, fmt.Errorf("amount pushed to remote peer for " + "initial state must be below the local funding amount") } // Ensure that the user doesn't exceed the current soft-limit for // channel size. If the funding amount is above the soft-limit, then // we'll reject the request. if localFundingAmt > MaxFundingAmount { return nil, fmt.Errorf("funding amount is too large, the max "+ "channel size is: %v", MaxFundingAmount) } // Restrict the size of the channel we'll actually open. At a later // level, we'll ensure that the output we create after accounting for // fees that a dust output isn't created. if localFundingAmt < minChanFundingSize { return nil, fmt.Errorf("channel is too small, the minimum "+ "channel size is: %v SAT", int64(minChanFundingSize)) } // Then, we'll extract the minimum number of confirmations that each // output we use to fund the channel's funding transaction should // satisfy. minConfs, err := extractOpenChannelMinConfs(in) if err != nil { return nil, err } // TODO(roasbeef): also return channel ID? var nodePubKey *btcec.PublicKey // Parse the remote pubkey the NodePubkey field of the request. If it's // not present, we'll fallback to the deprecated version that parses the // key from a hex string if this is for REST for backwards compatibility. switch { // Parse the raw bytes of the node key into a pubkey object so we can // easily manipulate it. case len(in.NodePubkey) > 0: nodePubKey, err = btcec.ParsePubKey(in.NodePubkey, btcec.S256()) if err != nil { return nil, err } // Decode the provided target node's public key, parsing it into a pub // key object. For all sync call, byte slices are expected to be encoded // as hex strings. case isSync: keyBytes, err := hex.DecodeString(in.NodePubkeyString) if err != nil { return nil, err } nodePubKey, err = btcec.ParsePubKey(keyBytes, btcec.S256()) if err != nil { return nil, err } default: return nil, fmt.Errorf("NodePubkey is not set") } // Making a channel to ourselves wouldn't be of any use, so we // explicitly disallow them. if nodePubKey.IsEqual(r.server.identityPriv.PubKey()) { return nil, fmt.Errorf("cannot open channel to self") } // Based on the passed fee related parameters, we'll determine an // appropriate fee rate for the funding transaction. satPerKw := chainfee.SatPerKVByte(in.SatPerByte * 1000).FeePerKWeight() feeRate, err := sweep.DetermineFeePerKw( r.server.cc.feeEstimator, sweep.FeePreference{ ConfTarget: uint32(in.TargetConf), FeeRate: satPerKw, }, ) if err != nil { return nil, err } rpcsLog.Debugf("[openchannel]: using fee of %v sat/kw for funding tx", int64(feeRate)) script, err := parseUpfrontShutdownAddress(in.CloseAddress) if err != nil { return nil, fmt.Errorf("error parsing upfront shutdown: %v", err) } // Instruct the server to trigger the necessary events to attempt to // open a new channel. A stream is returned in place, this stream will // be used to consume updates of the state of the pending channel. return &openChanReq{ targetPubkey: nodePubKey, chainHash: *activeNetParams.GenesisHash, localFundingAmt: localFundingAmt, pushAmt: lnwire.NewMSatFromSatoshis(remoteInitialBalance), minHtlcIn: minHtlcIn, fundingFeePerKw: feeRate, private: in.Private, remoteCsvDelay: remoteCsvDelay, minConfs: minConfs, shutdownScript: script, }, nil } // OpenChannel attempts to open a singly funded channel specified in the // request to a remote peer. func (r *rpcServer) OpenChannel(in *lnrpc.OpenChannelRequest, updateStream lnrpc.Lightning_OpenChannelServer) error { if err := r.canOpenChannel(); err != nil { return err } req, err := r.parseOpenChannelReq(in, false) if err != nil { return err } // If the user has provided a shim, then we'll now augment the based // open channel request with this additional logic. if in.FundingShim != nil { switch { // If we have a chan point shim, then this means the funding // transaction was crafted externally. In this case we only // need to hand a channel point down into the wallet. case in.FundingShim.GetChanPointShim() != nil: chanPointShim := in.FundingShim.GetChanPointShim() // Map the channel point shim into a new // chanfunding.CannedAssembler that the wallet will use // to obtain the channel point details. copy(req.pendingChanID[:], chanPointShim.PendingChanId) req.chanFunder, err = newFundingShimAssembler( chanPointShim, true, r.server.cc.keyRing, ) if err != nil { return err } // If we have a PSBT shim, then this means the funding // transaction will be crafted outside of the wallet, once the // funding multisig output script is known. We'll create an // intent that will supervise the multi-step process. case in.FundingShim.GetPsbtShim() != nil: psbtShim := in.FundingShim.GetPsbtShim() // Instruct the wallet to use the new // chanfunding.PsbtAssembler to construct the funding // transaction. copy(req.pendingChanID[:], psbtShim.PendingChanId) req.chanFunder, err = newPsbtAssembler( in, req.minConfs, psbtShim, &r.server.cc.wallet.Cfg.NetParams, ) if err != nil { return err } } } updateChan, errChan := r.server.OpenChannel(req) var outpoint wire.OutPoint out: for { select { case err := <-errChan: rpcsLog.Errorf("unable to open channel to NodeKey(%x): %v", req.targetPubkey.SerializeCompressed(), err) return err case fundingUpdate := <-updateChan: rpcsLog.Tracef("[openchannel] sending update: %v", fundingUpdate) if err := updateStream.Send(fundingUpdate); err != nil { return err } // If a final channel open update is being sent, then // we can break out of our recv loop as we no longer // need to process any further updates. switch update := fundingUpdate.Update.(type) { case *lnrpc.OpenStatusUpdate_ChanOpen: chanPoint := update.ChanOpen.ChannelPoint txid, err := GetChanPointFundingTxid(chanPoint) if err != nil { return err } outpoint = wire.OutPoint{ Hash: *txid, Index: chanPoint.OutputIndex, } break out } case <-r.quit: return nil } } rpcsLog.Tracef("[openchannel] success NodeKey(%x), ChannelPoint(%v)", req.targetPubkey.SerializeCompressed(), outpoint) return nil } // OpenChannelSync is a synchronous version of the OpenChannel RPC call. This // call is meant to be consumed by clients to the REST proxy. As with all other // sync calls, all byte slices are instead to be populated as hex encoded // strings. func (r *rpcServer) OpenChannelSync(ctx context.Context, in *lnrpc.OpenChannelRequest) (*lnrpc.ChannelPoint, error) { if err := r.canOpenChannel(); err != nil { return nil, err } req, err := r.parseOpenChannelReq(in, true) if err != nil { return nil, err } updateChan, errChan := r.server.OpenChannel(req) select { // If an error occurs them immediately return the error to the client. case err := <-errChan: rpcsLog.Errorf("unable to open channel to NodeKey(%x): %v", req.targetPubkey.SerializeCompressed(), err) return nil, err // Otherwise, wait for the first channel update. The first update sent // is when the funding transaction is broadcast to the network. case fundingUpdate := <-updateChan: rpcsLog.Tracef("[openchannel] sending update: %v", fundingUpdate) // Parse out the txid of the pending funding transaction. The // sync client can use this to poll against the list of // PendingChannels. openUpdate := fundingUpdate.Update.(*lnrpc.OpenStatusUpdate_ChanPending) chanUpdate := openUpdate.ChanPending return &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: chanUpdate.Txid, }, OutputIndex: chanUpdate.OutputIndex, }, nil case <-r.quit: return nil, nil } } // parseUpfrontShutdownScript attempts to parse an upfront shutdown address. // If the address is empty, it returns nil. If it successfully decoded the // address, it returns a script that pays out to the address. func parseUpfrontShutdownAddress(address string) (lnwire.DeliveryAddress, error) { if len(address) == 0 { return nil, nil } addr, err := btcutil.DecodeAddress( address, activeNetParams.Params, ) if err != nil { return nil, fmt.Errorf("invalid address: %v", err) } return txscript.PayToAddrScript(addr) } // GetChanPointFundingTxid returns the given channel point's funding txid in // raw bytes. func GetChanPointFundingTxid(chanPoint *lnrpc.ChannelPoint) (*chainhash.Hash, error) { var txid []byte // A channel point's funding txid can be get/set as a byte slice or a // string. In the case it is a string, decode it. switch chanPoint.GetFundingTxid().(type) { case *lnrpc.ChannelPoint_FundingTxidBytes: txid = chanPoint.GetFundingTxidBytes() case *lnrpc.ChannelPoint_FundingTxidStr: s := chanPoint.GetFundingTxidStr() h, err := chainhash.NewHashFromStr(s) if err != nil { return nil, err } txid = h[:] } return chainhash.NewHash(txid) } // CloseChannel attempts to close an active channel identified by its channel // point. The actions of this method can additionally be augmented to attempt // a force close after a timeout period in the case of an inactive peer. func (r *rpcServer) CloseChannel(in *lnrpc.CloseChannelRequest, updateStream lnrpc.Lightning_CloseChannelServer) error { if !r.server.Started() { return ErrServerNotActive } // If the user didn't specify a channel point, then we'll reject this // request all together. if in.GetChannelPoint() == nil { return fmt.Errorf("must specify channel point in close channel") } // If force closing a channel, the fee set in the commitment transaction // is used. if in.Force && (in.SatPerByte != 0 || in.TargetConf != 0) { return fmt.Errorf("force closing a channel uses a pre-defined fee") } force := in.Force index := in.ChannelPoint.OutputIndex txid, err := GetChanPointFundingTxid(in.GetChannelPoint()) if err != nil { rpcsLog.Errorf("[closechannel] unable to get funding txid: %v", err) return err } chanPoint := wire.NewOutPoint(txid, index) rpcsLog.Tracef("[closechannel] request for ChannelPoint(%v), force=%v", chanPoint, force) var ( updateChan chan interface{} errChan chan error ) // TODO(roasbeef): if force and peer online then don't force? // First, we'll fetch the channel as is, as we'll need to examine it // regardless of if this is a force close or not. channel, err := r.server.chanDB.FetchChannel(*chanPoint) if err != nil { return err } // Retrieve the best height of the chain, which we'll use to complete // either closing flow. _, bestHeight, err := r.server.cc.chainIO.GetBestBlock() if err != nil { return err } // If a force closure was requested, then we'll handle all the details // around the creation and broadcast of the unilateral closure // transaction here rather than going to the switch as we don't require // interaction from the peer. if force { // As we're force closing this channel, as a precaution, we'll // ensure that the switch doesn't continue to see this channel // as eligible for forwarding HTLC's. If the peer is online, // then we'll also purge all of its indexes. remotePub := channel.IdentityPub if peer, err := r.server.FindPeer(remotePub); err == nil { // TODO(roasbeef): actually get the active channel // instead too? // * so only need to grab from database peer.WipeChannel(&channel.FundingOutpoint) } else { chanID := lnwire.NewChanIDFromOutPoint(&channel.FundingOutpoint) r.server.htlcSwitch.RemoveLink(chanID) } // With the necessary indexes cleaned up, we'll now force close // the channel. chainArbitrator := r.server.chainArb closingTx, err := chainArbitrator.ForceCloseContract( *chanPoint, ) if err != nil { rpcsLog.Errorf("unable to force close transaction: %v", err) return err } closingTxid := closingTx.TxHash() // With the transaction broadcast, we send our first update to // the client. updateChan = make(chan interface{}, 2) updateChan <- &pendingUpdate{ Txid: closingTxid[:], } errChan = make(chan error, 1) notifier := r.server.cc.chainNotifier go waitForChanToClose(uint32(bestHeight), notifier, errChan, chanPoint, &closingTxid, closingTx.TxOut[0].PkScript, func() { // Respond to the local subsystem which // requested the channel closure. updateChan <- &channelCloseUpdate{ ClosingTxid: closingTxid[:], Success: true, } }) } else { // If this is a frozen channel, then we only allow the co-op // close to proceed if we were the responder to this channel. if channel.ChanType.IsFrozen() && channel.IsInitiator && uint32(bestHeight) < channel.ThawHeight { return fmt.Errorf("cannot co-op close frozen channel "+ "as initiator until height=%v, "+ "(current_height=%v)", channel.ThawHeight, bestHeight) } // If the link is not known by the switch, we cannot gracefully close // the channel. channelID := lnwire.NewChanIDFromOutPoint(chanPoint) if _, err := r.server.htlcSwitch.GetLink(channelID); err != nil { rpcsLog.Debugf("Trying to non-force close offline channel with "+ "chan_point=%v", chanPoint) return fmt.Errorf("unable to gracefully close channel while peer "+ "is offline (try force closing it instead): %v", err) } // Based on the passed fee related parameters, we'll determine // an appropriate fee rate for the cooperative closure // transaction. satPerKw := chainfee.SatPerKVByte( in.SatPerByte * 1000, ).FeePerKWeight() feeRate, err := sweep.DetermineFeePerKw( r.server.cc.feeEstimator, sweep.FeePreference{ ConfTarget: uint32(in.TargetConf), FeeRate: satPerKw, }, ) if err != nil { return err } rpcsLog.Debugf("Target sat/kw for closing transaction: %v", int64(feeRate)) // Before we attempt the cooperative channel closure, we'll // examine the channel to ensure that it doesn't have a // lingering HTLC. if len(channel.ActiveHtlcs()) != 0 { return fmt.Errorf("cannot co-op close channel " + "with active htlcs") } // Otherwise, the caller has requested a regular interactive // cooperative channel closure. So we'll forward the request to // the htlc switch which will handle the negotiation and // broadcast details. var deliveryScript lnwire.DeliveryAddress // If a delivery address to close out to was specified, decode it. if len(in.DeliveryAddress) > 0 { // Decode the address provided. addr, err := btcutil.DecodeAddress( in.DeliveryAddress, activeNetParams.Params, ) if err != nil { return fmt.Errorf("invalid delivery address: %v", err) } // Create a script to pay out to the address provided. deliveryScript, err = txscript.PayToAddrScript(addr) if err != nil { return err } } updateChan, errChan = r.server.htlcSwitch.CloseLink( chanPoint, htlcswitch.CloseRegular, feeRate, deliveryScript, ) } out: for { select { case err := <-errChan: rpcsLog.Errorf("[closechannel] unable to close "+ "ChannelPoint(%v): %v", chanPoint, err) return err case closingUpdate := <-updateChan: rpcClosingUpdate, err := createRPCCloseUpdate( closingUpdate, ) if err != nil { return err } rpcsLog.Tracef("[closechannel] sending update: %v", rpcClosingUpdate) if err := updateStream.Send(rpcClosingUpdate); err != nil { return err } // If a final channel closing updates is being sent, // then we can break out of our dispatch loop as we no // longer need to process any further updates. switch closeUpdate := closingUpdate.(type) { case *channelCloseUpdate: h, _ := chainhash.NewHash(closeUpdate.ClosingTxid) rpcsLog.Infof("[closechannel] close completed: "+ "txid(%v)", h) break out } case <-r.quit: return nil } } return nil } func createRPCCloseUpdate(update interface{}) ( *lnrpc.CloseStatusUpdate, error) { switch u := update.(type) { case *channelCloseUpdate: return &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ChanClose{ ChanClose: &lnrpc.ChannelCloseUpdate{ ClosingTxid: u.ClosingTxid, }, }, }, nil case *pendingUpdate: return &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ClosePending{ ClosePending: &lnrpc.PendingUpdate{ Txid: u.Txid, OutputIndex: u.OutputIndex, }, }, }, nil } return nil, errors.New("unknown close status update") } // abandonChanFromGraph attempts to remove a channel from the channel graph. If // we can't find the chanID in the graph, then we assume it has already been // removed, and will return a nop. func abandonChanFromGraph(chanGraph *channeldb.ChannelGraph, chanPoint *wire.OutPoint) error { // First, we'll obtain the channel ID. If we can't locate this, then // it's the case that the channel may have already been removed from // the graph, so we'll return a nil error. chanID, err := chanGraph.ChannelID(chanPoint) switch { case err == channeldb.ErrEdgeNotFound: return nil case err != nil: return err } // If the channel ID is still in the graph, then that means the channel // is still open, so we'll now move to purge it from the graph. return chanGraph.DeleteChannelEdges(chanID) } // AbandonChannel removes all channel state from the database except for a // close summary. This method can be used to get rid of permanently unusable // channels due to bugs fixed in newer versions of lnd. func (r *rpcServer) AbandonChannel(ctx context.Context, in *lnrpc.AbandonChannelRequest) (*lnrpc.AbandonChannelResponse, error) { // If this isn't the dev build, then we won't allow the RPC to be // executed, as it's an advanced feature and won't be activated in // regular production/release builds. if !build.IsDevBuild() { return nil, fmt.Errorf("AbandonChannel RPC call only " + "available in dev builds") } // We'll parse out the arguments to we can obtain the chanPoint of the // target channel. txid, err := GetChanPointFundingTxid(in.GetChannelPoint()) if err != nil { return nil, err } index := in.ChannelPoint.OutputIndex chanPoint := wire.NewOutPoint(txid, index) // When we remove the channel from the database, we need to set a close // height, so we'll just use the current best known height. _, bestHeight, err := r.server.cc.chainIO.GetBestBlock() if err != nil { return nil, err } dbChan, err := r.server.chanDB.FetchChannel(*chanPoint) switch { // If the channel isn't found in the set of open channels, then we can // continue on as it can't be loaded into the link/peer. case err == channeldb.ErrChannelNotFound: break // If the channel is still known to be open, then before we modify any // on-disk state, we'll remove the channel from the switch and peer // state if it's been loaded in. case err == nil: // We'll mark the channel as borked before we remove the state // from the switch/peer so it won't be loaded back in if the // peer reconnects. if err := dbChan.MarkBorked(); err != nil { return nil, err } remotePub := dbChan.IdentityPub if peer, err := r.server.FindPeer(remotePub); err == nil { peer.WipeChannel(chanPoint) } default: return nil, err } // Abandoning a channel is a three step process: remove from the open // channel state, remove from the graph, remove from the contract // court. Between any step it's possible that the users restarts the // process all over again. As a result, each of the steps below are // intended to be idempotent. err = r.server.chanDB.AbandonChannel(chanPoint, uint32(bestHeight)) if err != nil { return nil, err } err = abandonChanFromGraph( r.server.chanDB.ChannelGraph(), chanPoint, ) if err != nil { return nil, err } err = r.server.chainArb.ResolveContract(*chanPoint) if err != nil { return nil, err } // If this channel was in the process of being closed, but didn't fully // close, then it's possible that the nursery is hanging on to some // state. To err on the side of caution, we'll now attempt to wipe any // state for this channel from the nursery. err = r.server.utxoNursery.cfg.Store.RemoveChannel(chanPoint) if err != nil && err != ErrContractNotFound { return nil, err } // Finally, notify the backup listeners that the channel can be removed // from any channel backups. r.server.channelNotifier.NotifyClosedChannelEvent(*chanPoint) return &lnrpc.AbandonChannelResponse{}, nil } // GetInfo returns general information concerning the lightning node including // its identity pubkey, alias, the chains it is connected to, and information // concerning the number of open+pending channels. func (r *rpcServer) GetInfo(ctx context.Context, in *lnrpc.GetInfoRequest) (*lnrpc.GetInfoResponse, error) { serverPeers := r.server.Peers() openChannels, err := r.server.chanDB.FetchAllOpenChannels() if err != nil { return nil, err } var activeChannels uint32 for _, channel := range openChannels { chanID := lnwire.NewChanIDFromOutPoint(&channel.FundingOutpoint) if r.server.htlcSwitch.HasActiveLink(chanID) { activeChannels++ } } inactiveChannels := uint32(len(openChannels)) - activeChannels pendingChannels, err := r.server.chanDB.FetchPendingChannels() if err != nil { return nil, fmt.Errorf("unable to get retrieve pending "+ "channels: %v", err) } nPendingChannels := uint32(len(pendingChannels)) idPub := r.server.identityPriv.PubKey().SerializeCompressed() encodedIDPub := hex.EncodeToString(idPub) bestHash, bestHeight, err := r.server.cc.chainIO.GetBestBlock() if err != nil { return nil, fmt.Errorf("unable to get best block info: %v", err) } isSynced, bestHeaderTimestamp, err := r.server.cc.wallet.IsSynced() if err != nil { return nil, fmt.Errorf("unable to sync PoV of the wallet "+ "with current best block in the main chain: %v", err) } network := normalizeNetwork(activeNetParams.Name) activeChains := make([]*lnrpc.Chain, registeredChains.NumActiveChains()) for i, chain := range registeredChains.ActiveChains() { activeChains[i] = &lnrpc.Chain{ Chain: chain.String(), Network: network, } } // Check if external IP addresses were provided to lnd and use them // to set the URIs. nodeAnn, err := r.server.genNodeAnnouncement(false) if err != nil { return nil, fmt.Errorf("unable to retrieve current fully signed "+ "node announcement: %v", err) } addrs := nodeAnn.Addresses uris := make([]string, len(addrs)) for i, addr := range addrs { uris[i] = fmt.Sprintf("%s@%s", encodedIDPub, addr.String()) } isGraphSynced := r.server.authGossiper.SyncManager().IsGraphSynced() features := make(map[uint32]*lnrpc.Feature) sets := r.server.featureMgr.ListSets() for _, set := range sets { // Get the a list of lnrpc features for each set we support. featureVector := r.server.featureMgr.Get(set) rpcFeatures := invoicesrpc.CreateRPCFeatures(featureVector) // Add the features to our map of features, allowing over writing of // existing values because features in different sets with the same bit // are duplicated across sets. for bit, feature := range rpcFeatures { features[bit] = feature } } // TODO(roasbeef): add synced height n stuff return &lnrpc.GetInfoResponse{ IdentityPubkey: encodedIDPub, NumPendingChannels: nPendingChannels, NumActiveChannels: activeChannels, NumInactiveChannels: inactiveChannels, NumPeers: uint32(len(serverPeers)), BlockHeight: uint32(bestHeight), BlockHash: bestHash.String(), SyncedToChain: isSynced, Testnet: isTestnet(&activeNetParams), Chains: activeChains, Uris: uris, Alias: nodeAnn.Alias.String(), Color: routing.EncodeHexColor(nodeAnn.RGBColor), BestHeaderTimestamp: int64(bestHeaderTimestamp), Version: build.Version(), SyncedToGraph: isGraphSynced, Features: features, }, nil } // ListPeers returns a verbose listing of all currently active peers. func (r *rpcServer) ListPeers(ctx context.Context, in *lnrpc.ListPeersRequest) (*lnrpc.ListPeersResponse, error) { rpcsLog.Tracef("[listpeers] request") serverPeers := r.server.Peers() resp := &lnrpc.ListPeersResponse{ Peers: make([]*lnrpc.Peer, 0, len(serverPeers)), } for _, serverPeer := range serverPeers { var ( satSent int64 satRecv int64 ) // In order to display the total number of satoshis of outbound // (sent) and inbound (recv'd) satoshis that have been // transported through this peer, we'll sum up the sent/recv'd // values for each of the active channels we have with the // peer. chans := serverPeer.ChannelSnapshots() for _, c := range chans { satSent += int64(c.TotalMSatSent.ToSatoshis()) satRecv += int64(c.TotalMSatReceived.ToSatoshis()) } nodePub := serverPeer.PubKey() // Retrieve the peer's sync type. If we don't currently have a // syncer for the peer, then we'll default to a passive sync. // This can happen if the RPC is called while a peer is // initializing. syncer, ok := r.server.authGossiper.SyncManager().GossipSyncer( nodePub, ) var lnrpcSyncType lnrpc.Peer_SyncType if !ok { rpcsLog.Warnf("Gossip syncer for peer=%x not found", nodePub) lnrpcSyncType = lnrpc.Peer_UNKNOWN_SYNC } else { syncType := syncer.SyncType() switch syncType { case discovery.ActiveSync: lnrpcSyncType = lnrpc.Peer_ACTIVE_SYNC case discovery.PassiveSync: lnrpcSyncType = lnrpc.Peer_PASSIVE_SYNC default: return nil, fmt.Errorf("unhandled sync type %v", syncType) } } features := invoicesrpc.CreateRPCFeatures( serverPeer.RemoteFeatures(), ) peer := &lnrpc.Peer{ PubKey: hex.EncodeToString(nodePub[:]), Address: serverPeer.conn.RemoteAddr().String(), Inbound: serverPeer.inbound, BytesRecv: atomic.LoadUint64(&serverPeer.bytesReceived), BytesSent: atomic.LoadUint64(&serverPeer.bytesSent), SatSent: satSent, SatRecv: satRecv, PingTime: serverPeer.PingTime(), SyncType: lnrpcSyncType, Features: features, } var peerErrors []interface{} // If we only want the most recent error, get the most recent // error from the buffer and add it to our list of errors if // it is non-nil. If we want all the stored errors, simply // add the full list to our set of errors. if in.LatestError { latestErr := serverPeer.errorBuffer.Latest() if latestErr != nil { peerErrors = []interface{}{latestErr} } } else { peerErrors = serverPeer.errorBuffer.List() } // Add the relevant peer errors to our response. for _, error := range peerErrors { tsError := error.(*timestampedError) rpcErr := &lnrpc.TimestampedError{ Timestamp: uint64(tsError.timestamp.Unix()), Error: tsError.error.Error(), } peer.Errors = append(peer.Errors, rpcErr) } resp.Peers = append(resp.Peers, peer) } rpcsLog.Debugf("[listpeers] yielded %v peers", serverPeers) return resp, nil } // SubscribePeerEvents returns a uni-directional stream (server -> client) // for notifying the client of peer online and offline events. func (r *rpcServer) SubscribePeerEvents(req *lnrpc.PeerEventSubscription, eventStream lnrpc.Lightning_SubscribePeerEventsServer) error { peerEventSub, err := r.server.peerNotifier.SubscribePeerEvents() if err != nil { return err } defer peerEventSub.Cancel() for { select { // A new update has been sent by the peer notifier, we'll // marshal it into the form expected by the gRPC client, then // send it off to the client. case e := <-peerEventSub.Updates(): var event *lnrpc.PeerEvent switch peerEvent := e.(type) { case peernotifier.PeerOfflineEvent: event = &lnrpc.PeerEvent{ PubKey: hex.EncodeToString(peerEvent.PubKey[:]), Type: lnrpc.PeerEvent_PEER_OFFLINE, } case peernotifier.PeerOnlineEvent: event = &lnrpc.PeerEvent{ PubKey: hex.EncodeToString(peerEvent.PubKey[:]), Type: lnrpc.PeerEvent_PEER_ONLINE, } default: return fmt.Errorf("unexpected peer event: %v", event) } if err := eventStream.Send(event); err != nil { return err } case <-r.quit: return nil } } } // WalletBalance returns total unspent outputs(confirmed and unconfirmed), all // confirmed unspent outputs and all unconfirmed unspent outputs under control // by the wallet. This method can be modified by having the request specify // only witness outputs should be factored into the final output sum. // TODO(roasbeef): add async hooks into wallet balance changes func (r *rpcServer) WalletBalance(ctx context.Context, in *lnrpc.WalletBalanceRequest) (*lnrpc.WalletBalanceResponse, error) { // Get total balance, from txs that have >= 0 confirmations. totalBal, err := r.server.cc.wallet.ConfirmedBalance(0) if err != nil { return nil, err } // Get confirmed balance, from txs that have >= 1 confirmations. // TODO(halseth): get both unconfirmed and confirmed balance in one // call, as this is racy. confirmedBal, err := r.server.cc.wallet.ConfirmedBalance(1) if err != nil { return nil, err } // Get unconfirmed balance, from txs with 0 confirmations. unconfirmedBal := totalBal - confirmedBal rpcsLog.Debugf("[walletbalance] Total balance=%v (confirmed=%v, "+ "unconfirmed=%v)", totalBal, confirmedBal, unconfirmedBal) return &lnrpc.WalletBalanceResponse{ TotalBalance: int64(totalBal), ConfirmedBalance: int64(confirmedBal), UnconfirmedBalance: int64(unconfirmedBal), }, nil } // ChannelBalance returns the total available channel flow across all open // channels in satoshis. func (r *rpcServer) ChannelBalance(ctx context.Context, in *lnrpc.ChannelBalanceRequest) (*lnrpc.ChannelBalanceResponse, error) { openChannels, err := r.server.chanDB.FetchAllOpenChannels() if err != nil { return nil, err } var balance btcutil.Amount for _, channel := range openChannels { balance += channel.LocalCommitment.LocalBalance.ToSatoshis() } pendingChannels, err := r.server.chanDB.FetchPendingChannels() if err != nil { return nil, err } var pendingOpenBalance btcutil.Amount for _, channel := range pendingChannels { pendingOpenBalance += channel.LocalCommitment.LocalBalance.ToSatoshis() } rpcsLog.Debugf("[channelbalance] balance=%v pending-open=%v", balance, pendingOpenBalance) return &lnrpc.ChannelBalanceResponse{ Balance: int64(balance), PendingOpenBalance: int64(pendingOpenBalance), }, nil } // PendingChannels returns a list of all the channels that are currently // considered "pending". A channel is pending if it has finished the funding // workflow and is waiting for confirmations for the funding txn, or is in the // process of closure, either initiated cooperatively or non-cooperatively. func (r *rpcServer) PendingChannels(ctx context.Context, in *lnrpc.PendingChannelsRequest) (*lnrpc.PendingChannelsResponse, error) { rpcsLog.Debugf("[pendingchannels]") resp := &lnrpc.PendingChannelsResponse{} // rpcInitiator returns the correct lnrpc initiator for channels where // we have a record of the opening channel. rpcInitiator := func(isInitiator bool) lnrpc.Initiator { if isInitiator { return lnrpc.Initiator_INITIATOR_LOCAL } return lnrpc.Initiator_INITIATOR_REMOTE } // First, we'll populate the response with all the channels that are // soon to be opened. We can easily fetch this data from the database // and map the db struct to the proto response. pendingOpenChannels, err := r.server.chanDB.FetchPendingChannels() if err != nil { rpcsLog.Errorf("unable to fetch pending channels: %v", err) return nil, err } resp.PendingOpenChannels = make([]*lnrpc.PendingChannelsResponse_PendingOpenChannel, len(pendingOpenChannels)) for i, pendingChan := range pendingOpenChannels { pub := pendingChan.IdentityPub.SerializeCompressed() // As this is required for display purposes, we'll calculate // the weight of the commitment transaction. We also add on the // estimated weight of the witness to calculate the weight of // the transaction if it were to be immediately unilaterally // broadcast. // TODO(roasbeef): query for funding tx from wallet, display // that also? localCommitment := pendingChan.LocalCommitment utx := btcutil.NewTx(localCommitment.CommitTx) commitBaseWeight := blockchain.GetTransactionWeight(utx) commitWeight := commitBaseWeight + input.WitnessCommitmentTxWeight resp.PendingOpenChannels[i] = &lnrpc.PendingChannelsResponse_PendingOpenChannel{ Channel: &lnrpc.PendingChannelsResponse_PendingChannel{ RemoteNodePub: hex.EncodeToString(pub), ChannelPoint: pendingChan.FundingOutpoint.String(), Capacity: int64(pendingChan.Capacity), LocalBalance: int64(localCommitment.LocalBalance.ToSatoshis()), RemoteBalance: int64(localCommitment.RemoteBalance.ToSatoshis()), LocalChanReserveSat: int64(pendingChan.LocalChanCfg.ChanReserve), RemoteChanReserveSat: int64(pendingChan.RemoteChanCfg.ChanReserve), Initiator: rpcInitiator(pendingChan.IsInitiator), CommitmentType: rpcCommitmentType(pendingChan.ChanType), }, CommitWeight: commitWeight, CommitFee: int64(localCommitment.CommitFee), FeePerKw: int64(localCommitment.FeePerKw), // TODO(roasbeef): need to track confirmation height } } _, currentHeight, err := r.server.cc.chainIO.GetBestBlock() if err != nil { return nil, err } // Next, we'll examine the channels that are soon to be closed so we // can populate these fields within the response. pendingCloseChannels, err := r.server.chanDB.FetchClosedChannels(true) if err != nil { rpcsLog.Errorf("unable to fetch closed channels: %v", err) return nil, err } for _, pendingClose := range pendingCloseChannels { // First construct the channel struct itself, this will be // needed regardless of how this channel was closed. pub := pendingClose.RemotePub.SerializeCompressed() chanPoint := pendingClose.ChanPoint // Create the pending channel. If this channel was closed before // we started storing historical channel data, we will not know // who initiated the channel, so we set the initiator field to // unknown. channel := &lnrpc.PendingChannelsResponse_PendingChannel{ RemoteNodePub: hex.EncodeToString(pub), ChannelPoint: chanPoint.String(), Capacity: int64(pendingClose.Capacity), LocalBalance: int64(pendingClose.SettledBalance), CommitmentType: lnrpc.CommitmentType_UNKNOWN_COMMITMENT_TYPE, Initiator: lnrpc.Initiator_INITIATOR_UNKNOWN, } // Lookup the channel in the historical channel bucket to obtain // initiator information. If the historical channel bucket was // not found, or the channel itself, this channel was closed // in a version before we started persisting historical // channels, so we silence the error. historical, err := r.server.chanDB.FetchHistoricalChannel( &pendingClose.ChanPoint, ) switch err { // If the channel was closed in a version that did not record // historical channels, ignore the error. case channeldb.ErrNoHistoricalBucket: case channeldb.ErrChannelNotFound: case nil: channel.Initiator = rpcInitiator(historical.IsInitiator) channel.CommitmentType = rpcCommitmentType( historical.ChanType, ) // If the error is non-nil, and not due to older versions of lnd // not persisting historical channels, return it. default: return nil, err } closeTXID := pendingClose.ClosingTXID.String() switch pendingClose.CloseType { // A coop closed channel should never be in the "pending close" // state. If a node upgraded from an older lnd version in the // middle of a their channel confirming, it will be in this // state. We log a warning that the channel will not be included // in the now deprecated pending close channels field. case channeldb.CooperativeClose: rpcsLog.Warn("channel %v cooperatively closed and "+ "in pending close state", pendingClose.ChanPoint) // If the channel was force closed, then we'll need to query // the utxoNursery for additional information. // TODO(halseth): distinguish remote and local case? case channeldb.LocalForceClose, channeldb.RemoteForceClose: forceClose := &lnrpc.PendingChannelsResponse_ForceClosedChannel{ Channel: channel, ClosingTxid: closeTXID, } // Fetch reports from both nursery and resolvers. At the // moment this is not an atomic snapshot. This is // planned to be resolved when the nursery is removed // and channel arbitrator will be the single source for // these kind of reports. err := r.nurseryPopulateForceCloseResp( &chanPoint, currentHeight, forceClose, ) if err != nil { return nil, err } err = r.arbitratorPopulateForceCloseResp( &chanPoint, currentHeight, forceClose, ) if err != nil { return nil, err } resp.TotalLimboBalance += int64(forceClose.LimboBalance) resp.PendingForceClosingChannels = append( resp.PendingForceClosingChannels, forceClose, ) } } // We'll also fetch all channels that are open, but have had their // commitment broadcasted, meaning they are waiting for the closing // transaction to confirm. waitingCloseChans, err := r.server.chanDB.FetchWaitingCloseChannels() if err != nil { rpcsLog.Errorf("unable to fetch channels waiting close: %v", err) return nil, err } for _, waitingClose := range waitingCloseChans { pub := waitingClose.IdentityPub.SerializeCompressed() chanPoint := waitingClose.FundingOutpoint var commitments lnrpc.PendingChannelsResponse_Commitments // Report local commit. May not be present when DLP is active. if waitingClose.LocalCommitment.CommitTx != nil { commitments.LocalTxid = waitingClose.LocalCommitment.CommitTx.TxHash(). String() commitments.LocalCommitFeeSat = uint64( waitingClose.LocalCommitment.CommitFee, ) } // Report remote commit. May not be present when DLP is active. if waitingClose.RemoteCommitment.CommitTx != nil { commitments.RemoteTxid = waitingClose.RemoteCommitment.CommitTx.TxHash(). String() commitments.RemoteCommitFeeSat = uint64( waitingClose.RemoteCommitment.CommitFee, ) } // Report the remote pending commit if any. remoteCommitDiff, err := waitingClose.RemoteCommitChainTip() switch { // Don't set hash if there is no pending remote commit. case err == channeldb.ErrNoPendingCommit: // An unexpected error occurred. case err != nil: return nil, err // There is a pending remote commit. Set its hash in the // response. default: hash := remoteCommitDiff.Commitment.CommitTx.TxHash() commitments.RemotePendingTxid = hash.String() commitments.RemoteCommitFeeSat = uint64( remoteCommitDiff.Commitment.CommitFee, ) } channel := &lnrpc.PendingChannelsResponse_PendingChannel{ RemoteNodePub: hex.EncodeToString(pub), ChannelPoint: chanPoint.String(), Capacity: int64(waitingClose.Capacity), LocalBalance: int64(waitingClose.LocalCommitment.LocalBalance.ToSatoshis()), RemoteBalance: int64(waitingClose.LocalCommitment.RemoteBalance.ToSatoshis()), LocalChanReserveSat: int64(waitingClose.LocalChanCfg.ChanReserve), RemoteChanReserveSat: int64(waitingClose.RemoteChanCfg.ChanReserve), Initiator: rpcInitiator(waitingClose.IsInitiator), CommitmentType: rpcCommitmentType(waitingClose.ChanType), } waitingCloseResp := &lnrpc.PendingChannelsResponse_WaitingCloseChannel{ Channel: channel, LimboBalance: channel.LocalBalance, Commitments: &commitments, } // A close tx has been broadcasted, all our balance will be in // limbo until it confirms. resp.WaitingCloseChannels = append( resp.WaitingCloseChannels, waitingCloseResp, ) resp.TotalLimboBalance += channel.LocalBalance } return resp, nil } // arbitratorPopulateForceCloseResp populates the pending channels response // message with channel resolution information from the contract resolvers. func (r *rpcServer) arbitratorPopulateForceCloseResp(chanPoint *wire.OutPoint, currentHeight int32, forceClose *lnrpc.PendingChannelsResponse_ForceClosedChannel) error { // Query for contract resolvers state. arbitrator, err := r.server.chainArb.GetChannelArbitrator(*chanPoint) if err != nil { return err } reports := arbitrator.Report() for _, report := range reports { switch report.Type { // For a direct output, populate/update the top level // response properties. case contractcourt.ReportOutputUnencumbered: // Populate the maturity height fields for the direct // commitment output to us. forceClose.MaturityHeight = report.MaturityHeight // If the transaction has been confirmed, then we can // compute how many blocks it has left. if forceClose.MaturityHeight != 0 { forceClose.BlocksTilMaturity = int32(forceClose.MaturityHeight) - currentHeight } // Add htlcs to the PendingHtlcs response property. case contractcourt.ReportOutputIncomingHtlc, contractcourt.ReportOutputOutgoingHtlc: // Don't report details on htlcs that are no longer in // limbo. if report.LimboBalance == 0 { break } incoming := report.Type == contractcourt.ReportOutputIncomingHtlc htlc := &lnrpc.PendingHTLC{ Incoming: incoming, Amount: int64(report.Amount), Outpoint: report.Outpoint.String(), MaturityHeight: report.MaturityHeight, Stage: report.Stage, } if htlc.MaturityHeight != 0 { htlc.BlocksTilMaturity = int32(htlc.MaturityHeight) - currentHeight } forceClose.PendingHtlcs = append(forceClose.PendingHtlcs, htlc) case contractcourt.ReportOutputAnchor: // There are three resolution states for the anchor: // limbo, lost and recovered. Derive the current state // from the limbo and recovered balances. switch { case report.RecoveredBalance != 0: forceClose.Anchor = lnrpc.PendingChannelsResponse_ForceClosedChannel_RECOVERED case report.LimboBalance != 0: forceClose.Anchor = lnrpc.PendingChannelsResponse_ForceClosedChannel_LIMBO default: forceClose.Anchor = lnrpc.PendingChannelsResponse_ForceClosedChannel_LOST } default: return fmt.Errorf("unknown report output type: %v", report.Type) } forceClose.LimboBalance += int64(report.LimboBalance) forceClose.RecoveredBalance += int64(report.RecoveredBalance) } return nil } // nurseryPopulateForceCloseResp populates the pending channels response // message with contract resolution information from utxonursery. func (r *rpcServer) nurseryPopulateForceCloseResp(chanPoint *wire.OutPoint, currentHeight int32, forceClose *lnrpc.PendingChannelsResponse_ForceClosedChannel) error { // Query for the maturity state for this force closed channel. If we // didn't have any time-locked outputs, then the nursery may not know of // the contract. nurseryInfo, err := r.server.utxoNursery.NurseryReport(chanPoint) if err == ErrContractNotFound { return nil } if err != nil { return fmt.Errorf("unable to obtain "+ "nursery report for ChannelPoint(%v): %v", chanPoint, err) } // If the nursery knows of this channel, then we can populate // information detailing exactly how much funds are time locked and also // the height in which we can ultimately sweep the funds into the // wallet. forceClose.LimboBalance = int64(nurseryInfo.limboBalance) forceClose.RecoveredBalance = int64(nurseryInfo.recoveredBalance) for _, htlcReport := range nurseryInfo.htlcs { // TODO(conner) set incoming flag appropriately after handling // incoming incubation htlc := &lnrpc.PendingHTLC{ Incoming: false, Amount: int64(htlcReport.amount), Outpoint: htlcReport.outpoint.String(), MaturityHeight: htlcReport.maturityHeight, Stage: htlcReport.stage, } if htlc.MaturityHeight != 0 { htlc.BlocksTilMaturity = int32(htlc.MaturityHeight) - currentHeight } forceClose.PendingHtlcs = append(forceClose.PendingHtlcs, htlc) } return nil } // ClosedChannels returns a list of all the channels have been closed. // This does not include channels that are still in the process of closing. func (r *rpcServer) ClosedChannels(ctx context.Context, in *lnrpc.ClosedChannelsRequest) (*lnrpc.ClosedChannelsResponse, error) { // Show all channels when no filter flags are set. filterResults := in.Cooperative || in.LocalForce || in.RemoteForce || in.Breach || in.FundingCanceled || in.Abandoned resp := &lnrpc.ClosedChannelsResponse{} dbChannels, err := r.server.chanDB.FetchClosedChannels(false) if err != nil { return nil, err } // In order to make the response easier to parse for clients, we'll // sort the set of closed channels by their closing height before // serializing the proto response. sort.Slice(dbChannels, func(i, j int) bool { return dbChannels[i].CloseHeight < dbChannels[j].CloseHeight }) for _, dbChannel := range dbChannels { if dbChannel.IsPending { continue } switch dbChannel.CloseType { case channeldb.CooperativeClose: if filterResults && !in.Cooperative { continue } case channeldb.LocalForceClose: if filterResults && !in.LocalForce { continue } case channeldb.RemoteForceClose: if filterResults && !in.RemoteForce { continue } case channeldb.BreachClose: if filterResults && !in.Breach { continue } case channeldb.FundingCanceled: if filterResults && !in.FundingCanceled { continue } case channeldb.Abandoned: if filterResults && !in.Abandoned { continue } } channel, err := r.createRPCClosedChannel(dbChannel) if err != nil { return nil, err } resp.Channels = append(resp.Channels, channel) } return resp, nil } // ListChannels returns a description of all the open channels that this node // is a participant in. func (r *rpcServer) ListChannels(ctx context.Context, in *lnrpc.ListChannelsRequest) (*lnrpc.ListChannelsResponse, error) { if in.ActiveOnly && in.InactiveOnly { return nil, fmt.Errorf("either `active_only` or " + "`inactive_only` can be set, but not both") } if in.PublicOnly && in.PrivateOnly { return nil, fmt.Errorf("either `public_only` or " + "`private_only` can be set, but not both") } if len(in.Peer) > 0 && len(in.Peer) != 33 { _, err := route.NewVertexFromBytes(in.Peer) return nil, fmt.Errorf("invalid `peer` key: %v", err) } resp := &lnrpc.ListChannelsResponse{} graph := r.server.chanDB.ChannelGraph() dbChannels, err := r.server.chanDB.FetchAllOpenChannels() if err != nil { return nil, err } rpcsLog.Debugf("[listchannels] fetched %v channels from DB", len(dbChannels)) for _, dbChannel := range dbChannels { nodePub := dbChannel.IdentityPub nodePubBytes := nodePub.SerializeCompressed() chanPoint := dbChannel.FundingOutpoint // If the caller requested channels for a target node, skip any // that don't match the provided pubkey. if len(in.Peer) > 0 && !bytes.Equal(nodePubBytes, in.Peer) { continue } var peerOnline bool if _, err := r.server.FindPeer(nodePub); err == nil { peerOnline = true } channelID := lnwire.NewChanIDFromOutPoint(&chanPoint) var linkActive bool if link, err := r.server.htlcSwitch.GetLink(channelID); err == nil { // A channel is only considered active if it is known // by the switch *and* able to forward // incoming/outgoing payments. linkActive = link.EligibleToForward() } // Next, we'll determine whether we should add this channel to // our list depending on the type of channels requested to us. isActive := peerOnline && linkActive channel, err := createRPCOpenChannel(r, graph, dbChannel, isActive) if err != nil { return nil, err } // We'll only skip returning this channel if we were requested // for a specific kind and this channel doesn't satisfy it. switch { case in.ActiveOnly && !isActive: continue case in.InactiveOnly && isActive: continue case in.PublicOnly && channel.Private: continue case in.PrivateOnly && !channel.Private: continue } resp.Channels = append(resp.Channels, channel) } return resp, nil } // rpcCommitmentType takes the channel type and converts it to an rpc commitment // type value. func rpcCommitmentType(chanType channeldb.ChannelType) lnrpc.CommitmentType { // Extract the commitment type from the channel type flags. We must // first check whether it has anchors, since in that case it would also // be tweakless. if chanType.HasAnchors() { return lnrpc.CommitmentType_ANCHORS } if chanType.IsTweakless() { return lnrpc.CommitmentType_STATIC_REMOTE_KEY } return lnrpc.CommitmentType_LEGACY } // createRPCOpenChannel creates an *lnrpc.Channel from the *channeldb.Channel. func createRPCOpenChannel(r *rpcServer, graph *channeldb.ChannelGraph, dbChannel *channeldb.OpenChannel, isActive bool) (*lnrpc.Channel, error) { nodePub := dbChannel.IdentityPub nodeID := hex.EncodeToString(nodePub.SerializeCompressed()) chanPoint := dbChannel.FundingOutpoint // Next, we'll determine whether the channel is public or not. isPublic := dbChannel.ChannelFlags&lnwire.FFAnnounceChannel != 0 // As this is required for display purposes, we'll calculate // the weight of the commitment transaction. We also add on the // estimated weight of the witness to calculate the weight of // the transaction if it were to be immediately unilaterally // broadcast. localCommit := dbChannel.LocalCommitment utx := btcutil.NewTx(localCommit.CommitTx) commitBaseWeight := blockchain.GetTransactionWeight(utx) commitWeight := commitBaseWeight + input.WitnessCommitmentTxWeight localBalance := localCommit.LocalBalance remoteBalance := localCommit.RemoteBalance // As an artifact of our usage of mSAT internally, either party // may end up in a state where they're holding a fractional // amount of satoshis which can't be expressed within the // actual commitment output. Since we round down when going // from mSAT -> SAT, we may at any point be adding an // additional SAT to miners fees. As a result, we display a // commitment fee that accounts for this externally. var sumOutputs btcutil.Amount for _, txOut := range localCommit.CommitTx.TxOut { sumOutputs += btcutil.Amount(txOut.Value) } externalCommitFee := dbChannel.Capacity - sumOutputs // Extract the commitment type from the channel type flags. commitmentType := rpcCommitmentType(dbChannel.ChanType) channel := &lnrpc.Channel{ Active: isActive, Private: !isPublic, RemotePubkey: nodeID, ChannelPoint: chanPoint.String(), ChanId: dbChannel.ShortChannelID.ToUint64(), Capacity: int64(dbChannel.Capacity), LocalBalance: int64(localBalance.ToSatoshis()), RemoteBalance: int64(remoteBalance.ToSatoshis()), CommitFee: int64(externalCommitFee), CommitWeight: commitWeight, FeePerKw: int64(localCommit.FeePerKw), TotalSatoshisSent: int64(dbChannel.TotalMSatSent.ToSatoshis()), TotalSatoshisReceived: int64(dbChannel.TotalMSatReceived.ToSatoshis()), NumUpdates: localCommit.CommitHeight, PendingHtlcs: make([]*lnrpc.HTLC, len(localCommit.Htlcs)), CsvDelay: uint32(dbChannel.LocalChanCfg.CsvDelay), Initiator: dbChannel.IsInitiator, ChanStatusFlags: dbChannel.ChanStatus().String(), LocalChanReserveSat: int64(dbChannel.LocalChanCfg.ChanReserve), RemoteChanReserveSat: int64(dbChannel.RemoteChanCfg.ChanReserve), StaticRemoteKey: commitmentType == lnrpc.CommitmentType_STATIC_REMOTE_KEY, CommitmentType: commitmentType, ThawHeight: dbChannel.ThawHeight, } for i, htlc := range localCommit.Htlcs { var rHash [32]byte copy(rHash[:], htlc.RHash[:]) channel.PendingHtlcs[i] = &lnrpc.HTLC{ Incoming: htlc.Incoming, Amount: int64(htlc.Amt.ToSatoshis()), HashLock: rHash[:], ExpirationHeight: htlc.RefundTimeout, } // Add the Pending Htlc Amount to UnsettledBalance field. channel.UnsettledBalance += channel.PendingHtlcs[i].Amount } // Lookup our balances at height 0, because they will reflect any // push amounts that may have been present when this channel was // created. localBalance, remoteBalance, err := dbChannel.BalancesAtHeight(0) if err != nil { return nil, err } // If we initiated opening the channel, the zero height remote balance // is the push amount. Otherwise, our starting balance is the push // amount. If there is no push amount, these values will simply be zero. if dbChannel.IsInitiator { channel.PushAmountSat = uint64(remoteBalance.ToSatoshis()) } else { channel.PushAmountSat = uint64(localBalance.ToSatoshis()) } outpoint := dbChannel.FundingOutpoint // Get the lifespan observed by the channel event store. If the channel is // not known to the channel event store, return early because we cannot // calculate any further uptime information. startTime, endTime, err := r.server.chanEventStore.GetLifespan(outpoint) switch err { case chanfitness.ErrChannelNotFound: rpcsLog.Infof("channel: %v not found by channel event store", outpoint) return channel, nil case nil: // If there is no error getting lifespan, continue to uptime // calculation. default: return nil, err } // If endTime is zero, the channel is still open, progress endTime to // the present so we can calculate lifetime. if endTime.IsZero() { endTime = time.Now() } channel.Lifetime = int64(endTime.Sub(startTime).Seconds()) // Once we have successfully obtained channel lifespan, we know that the // channel is known to the event store, so we can return any non-nil error // that occurs. uptime, err := r.server.chanEventStore.GetUptime( outpoint, startTime, endTime, ) if err != nil { return nil, err } channel.Uptime = int64(uptime.Seconds()) if len(dbChannel.LocalShutdownScript) > 0 { _, addresses, _, err := txscript.ExtractPkScriptAddrs( dbChannel.LocalShutdownScript, activeNetParams.Params, ) if err != nil { return nil, err } // We only expect one upfront shutdown address for a channel. If // LocalShutdownScript is non-zero, there should be one payout address // set. if len(addresses) != 1 { return nil, fmt.Errorf("expected one upfront shutdown address, "+ "got: %v", len(addresses)) } channel.CloseAddress = addresses[0].String() } return channel, nil } // createRPCClosedChannel creates an *lnrpc.ClosedChannelSummary from a // *channeldb.ChannelCloseSummary. func (r *rpcServer) createRPCClosedChannel( dbChannel *channeldb.ChannelCloseSummary) (*lnrpc.ChannelCloseSummary, error) { nodePub := dbChannel.RemotePub nodeID := hex.EncodeToString(nodePub.SerializeCompressed()) var ( closeType lnrpc.ChannelCloseSummary_ClosureType openInit lnrpc.Initiator closeInitiator lnrpc.Initiator err error ) // Lookup local and remote cooperative initiators. If these values // are not known they will just return unknown. openInit, closeInitiator, err = r.getInitiators( &dbChannel.ChanPoint, ) if err != nil { return nil, err } // Convert the close type to rpc type. switch dbChannel.CloseType { case channeldb.CooperativeClose: closeType = lnrpc.ChannelCloseSummary_COOPERATIVE_CLOSE case channeldb.LocalForceClose: closeType = lnrpc.ChannelCloseSummary_LOCAL_FORCE_CLOSE case channeldb.RemoteForceClose: closeType = lnrpc.ChannelCloseSummary_REMOTE_FORCE_CLOSE case channeldb.BreachClose: closeType = lnrpc.ChannelCloseSummary_BREACH_CLOSE case channeldb.FundingCanceled: closeType = lnrpc.ChannelCloseSummary_FUNDING_CANCELED case channeldb.Abandoned: closeType = lnrpc.ChannelCloseSummary_ABANDONED } return &lnrpc.ChannelCloseSummary{ Capacity: int64(dbChannel.Capacity), RemotePubkey: nodeID, CloseHeight: dbChannel.CloseHeight, CloseType: closeType, ChannelPoint: dbChannel.ChanPoint.String(), ChanId: dbChannel.ShortChanID.ToUint64(), SettledBalance: int64(dbChannel.SettledBalance), TimeLockedBalance: int64(dbChannel.TimeLockedBalance), ChainHash: dbChannel.ChainHash.String(), ClosingTxHash: dbChannel.ClosingTXID.String(), OpenInitiator: openInit, CloseInitiator: closeInitiator, }, nil } // getInitiators returns an initiator enum that provides information about the // party that initiated channel's open and close. This information is obtained // from the historical channel bucket, so unknown values are returned when the // channel is not present (which indicates that it was closed before we started // writing channels to the historical close bucket). func (r *rpcServer) getInitiators(chanPoint *wire.OutPoint) ( lnrpc.Initiator, lnrpc.Initiator, error) { var ( openInitiator = lnrpc.Initiator_INITIATOR_UNKNOWN closeInitiator = lnrpc.Initiator_INITIATOR_UNKNOWN ) // To get the close initiator for cooperative closes, we need // to get the channel status from the historical channel bucket. histChan, err := r.server.chanDB.FetchHistoricalChannel(chanPoint) switch { // The node has upgraded from a version where we did not store // historical channels, and has not closed a channel since. Do // not return an error, initiator values are unknown. case err == channeldb.ErrNoHistoricalBucket: return openInitiator, closeInitiator, nil // The channel was closed before we started storing historical // channels. Do not return an error, initiator values are unknown. case err == channeldb.ErrChannelNotFound: return openInitiator, closeInitiator, nil case err != nil: return 0, 0, err } // If we successfully looked up the channel, determine initiator based // on channels status. if histChan.IsInitiator { openInitiator = lnrpc.Initiator_INITIATOR_LOCAL } else { openInitiator = lnrpc.Initiator_INITIATOR_REMOTE } localInit := histChan.HasChanStatus( channeldb.ChanStatusLocalCloseInitiator, ) remoteInit := histChan.HasChanStatus( channeldb.ChanStatusRemoteCloseInitiator, ) switch { // There is a possible case where closes were attempted by both parties. // We return the initiator as both in this case to provide full // information about the close. case localInit && remoteInit: closeInitiator = lnrpc.Initiator_INITIATOR_BOTH case localInit: closeInitiator = lnrpc.Initiator_INITIATOR_LOCAL case remoteInit: closeInitiator = lnrpc.Initiator_INITIATOR_REMOTE } return openInitiator, closeInitiator, nil } // SubscribeChannelEvents returns a uni-directional stream (server -> client) // for notifying the client of newly active, inactive or closed channels. func (r *rpcServer) SubscribeChannelEvents(req *lnrpc.ChannelEventSubscription, updateStream lnrpc.Lightning_SubscribeChannelEventsServer) error { channelEventSub, err := r.server.channelNotifier.SubscribeChannelEvents() if err != nil { return err } // Ensure that the resources for the client is cleaned up once either // the server, or client exits. defer channelEventSub.Cancel() graph := r.server.chanDB.ChannelGraph() for { select { // A new update has been sent by the channel router, we'll // marshal it into the form expected by the gRPC client, then // send it off to the client(s). case e := <-channelEventSub.Updates(): var update *lnrpc.ChannelEventUpdate switch event := e.(type) { case channelnotifier.PendingOpenChannelEvent: update = &lnrpc.ChannelEventUpdate{ Type: lnrpc.ChannelEventUpdate_PENDING_OPEN_CHANNEL, Channel: &lnrpc.ChannelEventUpdate_PendingOpenChannel{ PendingOpenChannel: &lnrpc.PendingUpdate{ Txid: event.ChannelPoint.Hash[:], OutputIndex: event.ChannelPoint.Index, }, }, } case channelnotifier.OpenChannelEvent: channel, err := createRPCOpenChannel(r, graph, event.Channel, true) if err != nil { return err } update = &lnrpc.ChannelEventUpdate{ Type: lnrpc.ChannelEventUpdate_OPEN_CHANNEL, Channel: &lnrpc.ChannelEventUpdate_OpenChannel{ OpenChannel: channel, }, } case channelnotifier.ClosedChannelEvent: closedChannel, err := r.createRPCClosedChannel( event.CloseSummary, ) if err != nil { return err } update = &lnrpc.ChannelEventUpdate{ Type: lnrpc.ChannelEventUpdate_CLOSED_CHANNEL, Channel: &lnrpc.ChannelEventUpdate_ClosedChannel{ ClosedChannel: closedChannel, }, } case channelnotifier.ActiveChannelEvent: update = &lnrpc.ChannelEventUpdate{ Type: lnrpc.ChannelEventUpdate_ACTIVE_CHANNEL, Channel: &lnrpc.ChannelEventUpdate_ActiveChannel{ ActiveChannel: &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: event.ChannelPoint.Hash[:], }, OutputIndex: event.ChannelPoint.Index, }, }, } case channelnotifier.InactiveChannelEvent: update = &lnrpc.ChannelEventUpdate{ Type: lnrpc.ChannelEventUpdate_INACTIVE_CHANNEL, Channel: &lnrpc.ChannelEventUpdate_InactiveChannel{ InactiveChannel: &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: event.ChannelPoint.Hash[:], }, OutputIndex: event.ChannelPoint.Index, }, }, } // Completely ignore ActiveLinkEvent as this is explicitly not // exposed to the RPC. case channelnotifier.ActiveLinkEvent: continue default: return fmt.Errorf("unexpected channel event update: %v", event) } if err := updateStream.Send(update); err != nil { return err } case <-r.quit: return nil } } } // paymentStream enables different types of payment streams, such as: // lnrpc.Lightning_SendPaymentServer and lnrpc.Lightning_SendToRouteServer to // execute sendPayment. We use this struct as a sort of bridge to enable code // re-use between SendPayment and SendToRoute. type paymentStream struct { recv func() (*rpcPaymentRequest, error) send func(*lnrpc.SendResponse) error } // rpcPaymentRequest wraps lnrpc.SendRequest so that routes from // lnrpc.SendToRouteRequest can be passed to sendPayment. type rpcPaymentRequest struct { *lnrpc.SendRequest route *route.Route } // SendPayment dispatches a bi-directional streaming RPC for sending payments // through the Lightning Network. A single RPC invocation creates a persistent // bi-directional stream allowing clients to rapidly send payments through the // Lightning Network with a single persistent connection. func (r *rpcServer) SendPayment(stream lnrpc.Lightning_SendPaymentServer) error { var lock sync.Mutex return r.sendPayment(&paymentStream{ recv: func() (*rpcPaymentRequest, error) { req, err := stream.Recv() if err != nil { return nil, err } return &rpcPaymentRequest{ SendRequest: req, }, nil }, send: func(r *lnrpc.SendResponse) error { // Calling stream.Send concurrently is not safe. lock.Lock() defer lock.Unlock() return stream.Send(r) }, }) } // SendToRoute dispatches a bi-directional streaming RPC for sending payments // through the Lightning Network via predefined routes passed in. A single RPC // invocation creates a persistent bi-directional stream allowing clients to // rapidly send payments through the Lightning Network with a single persistent // connection. func (r *rpcServer) SendToRoute(stream lnrpc.Lightning_SendToRouteServer) error { var lock sync.Mutex return r.sendPayment(&paymentStream{ recv: func() (*rpcPaymentRequest, error) { req, err := stream.Recv() if err != nil { return nil, err } return r.unmarshallSendToRouteRequest(req) }, send: func(r *lnrpc.SendResponse) error { // Calling stream.Send concurrently is not safe. lock.Lock() defer lock.Unlock() return stream.Send(r) }, }) } // unmarshallSendToRouteRequest unmarshalls an rpc sendtoroute request func (r *rpcServer) unmarshallSendToRouteRequest( req *lnrpc.SendToRouteRequest) (*rpcPaymentRequest, error) { if req.Route == nil { return nil, fmt.Errorf("unable to send, no route provided") } route, err := r.routerBackend.UnmarshallRoute(req.Route) if err != nil { return nil, err } return &rpcPaymentRequest{ SendRequest: &lnrpc.SendRequest{ PaymentHash: req.PaymentHash, PaymentHashString: req.PaymentHashString, }, route: route, }, nil } // rpcPaymentIntent is a small wrapper struct around the of values we can // receive from a client over RPC if they wish to send a payment. We'll either // extract these fields from a payment request (which may include routing // hints), or we'll get a fully populated route from the user that we'll pass // directly to the channel router for dispatching. type rpcPaymentIntent struct { msat lnwire.MilliSatoshi feeLimit lnwire.MilliSatoshi cltvLimit uint32 dest route.Vertex rHash [32]byte cltvDelta uint16 routeHints [][]zpay32.HopHint outgoingChannelID *uint64 lastHop *route.Vertex destFeatures *lnwire.FeatureVector paymentAddr *[32]byte payReq []byte destCustomRecords record.CustomSet route *route.Route } // extractPaymentIntent attempts to parse the complete details required to // dispatch a client from the information presented by an RPC client. There are // three ways a client can specify their payment details: a payment request, // via manual details, or via a complete route. func (r *rpcServer) extractPaymentIntent(rpcPayReq *rpcPaymentRequest) (rpcPaymentIntent, error) { payIntent := rpcPaymentIntent{} // If a route was specified, then we can use that directly. if rpcPayReq.route != nil { // If the user is using the REST interface, then they'll be // passing the payment hash as a hex encoded string. if rpcPayReq.PaymentHashString != "" { paymentHash, err := hex.DecodeString( rpcPayReq.PaymentHashString, ) if err != nil { return payIntent, err } copy(payIntent.rHash[:], paymentHash) } else { copy(payIntent.rHash[:], rpcPayReq.PaymentHash) } payIntent.route = rpcPayReq.route return payIntent, nil } // If there are no routes specified, pass along a outgoing channel // restriction if specified. if rpcPayReq.OutgoingChanId != 0 { payIntent.outgoingChannelID = &rpcPayReq.OutgoingChanId } // Pass along a last hop restriction if specified. if len(rpcPayReq.LastHopPubkey) > 0 { lastHop, err := route.NewVertexFromBytes( rpcPayReq.LastHopPubkey, ) if err != nil { return payIntent, err } payIntent.lastHop = &lastHop } // Take the CLTV limit from the request if set, otherwise use the max. cltvLimit, err := routerrpc.ValidateCLTVLimit( rpcPayReq.CltvLimit, cfg.MaxOutgoingCltvExpiry, ) if err != nil { return payIntent, err } payIntent.cltvLimit = cltvLimit customRecords := record.CustomSet(rpcPayReq.DestCustomRecords) if err := customRecords.Validate(); err != nil { return payIntent, err } payIntent.destCustomRecords = customRecords validateDest := func(dest route.Vertex) error { if rpcPayReq.AllowSelfPayment { return nil } if dest == r.selfNode { return errors.New("self-payments not allowed") } return nil } // If the payment request field isn't blank, then the details of the // invoice are encoded entirely within the encoded payReq. So we'll // attempt to decode it, populating the payment accordingly. if rpcPayReq.PaymentRequest != "" { payReq, err := zpay32.Decode( rpcPayReq.PaymentRequest, activeNetParams.Params, ) if err != nil { return payIntent, err } // Next, we'll ensure that this payreq hasn't already expired. err = routerrpc.ValidatePayReqExpiry(payReq) if err != nil { return payIntent, err } // If the amount was not included in the invoice, then we let // the payee specify the amount of satoshis they wish to send. // We override the amount to pay with the amount provided from // the payment request. if payReq.MilliSat == nil { amt, err := lnrpc.UnmarshallAmt( rpcPayReq.Amt, rpcPayReq.AmtMsat, ) if err != nil { return payIntent, err } if amt == 0 { return payIntent, errors.New("amount must be " + "specified when paying a zero amount " + "invoice") } payIntent.msat = amt } else { payIntent.msat = *payReq.MilliSat } // Calculate the fee limit that should be used for this payment. payIntent.feeLimit = lnrpc.CalculateFeeLimit( rpcPayReq.FeeLimit, payIntent.msat, ) copy(payIntent.rHash[:], payReq.PaymentHash[:]) destKey := payReq.Destination.SerializeCompressed() copy(payIntent.dest[:], destKey) payIntent.cltvDelta = uint16(payReq.MinFinalCLTVExpiry()) payIntent.routeHints = payReq.RouteHints payIntent.payReq = []byte(rpcPayReq.PaymentRequest) payIntent.destFeatures = payReq.Features payIntent.paymentAddr = payReq.PaymentAddr if err := validateDest(payIntent.dest); err != nil { return payIntent, err } return payIntent, nil } // At this point, a destination MUST be specified, so we'll convert it // into the proper representation now. The destination will either be // encoded as raw bytes, or via a hex string. var pubBytes []byte if len(rpcPayReq.Dest) != 0 { pubBytes = rpcPayReq.Dest } else { var err error pubBytes, err = hex.DecodeString(rpcPayReq.DestString) if err != nil { return payIntent, err } } if len(pubBytes) != 33 { return payIntent, errors.New("invalid key length") } copy(payIntent.dest[:], pubBytes) if err := validateDest(payIntent.dest); err != nil { return payIntent, err } // Otherwise, If the payment request field was not specified // (and a custom route wasn't specified), construct the payment // from the other fields. payIntent.msat, err = lnrpc.UnmarshallAmt( rpcPayReq.Amt, rpcPayReq.AmtMsat, ) if err != nil { return payIntent, err } // Calculate the fee limit that should be used for this payment. payIntent.feeLimit = lnrpc.CalculateFeeLimit( rpcPayReq.FeeLimit, payIntent.msat, ) if rpcPayReq.FinalCltvDelta != 0 { payIntent.cltvDelta = uint16(rpcPayReq.FinalCltvDelta) } else { // If no final cltv delta is given, assume the default that we // use when creating an invoice. We do not assume the default of // 9 blocks that is defined in BOLT-11, because this is never // enough for other lnd nodes. payIntent.cltvDelta = uint16(cfg.Bitcoin.TimeLockDelta) } // If the user is manually specifying payment details, then the payment // hash may be encoded as a string. switch { case rpcPayReq.PaymentHashString != "": paymentHash, err := hex.DecodeString( rpcPayReq.PaymentHashString, ) if err != nil { return payIntent, err } copy(payIntent.rHash[:], paymentHash) default: copy(payIntent.rHash[:], rpcPayReq.PaymentHash) } // Unmarshal any custom destination features. payIntent.destFeatures, err = routerrpc.UnmarshalFeatures( rpcPayReq.DestFeatures, ) if err != nil { return payIntent, err } // Currently, within the bootstrap phase of the network, we limit the // largest payment size allotted to (2^32) - 1 mSAT or 4.29 million // satoshis. if payIntent.msat > MaxPaymentMSat { // In this case, we'll send an error to the caller, but // continue our loop for the next payment. return payIntent, fmt.Errorf("payment of %v is too large, "+ "max payment allowed is %v", payIntent.msat, MaxPaymentMSat) } return payIntent, nil } type paymentIntentResponse struct { Route *route.Route Preimage [32]byte Err error } // dispatchPaymentIntent attempts to fully dispatch an RPC payment intent. // We'll either pass the payment as a whole to the channel router, or give it a // pre-built route. The first error this method returns denotes if we were // unable to save the payment. The second error returned denotes if the payment // didn't succeed. func (r *rpcServer) dispatchPaymentIntent( payIntent *rpcPaymentIntent) (*paymentIntentResponse, error) { // Construct a payment request to send to the channel router. If the // payment is successful, the route chosen will be returned. Otherwise, // we'll get a non-nil error. var ( preImage [32]byte route *route.Route routerErr error ) // If a route was specified, then we'll pass the route directly to the // router, otherwise we'll create a payment session to execute it. if payIntent.route == nil { payment := &routing.LightningPayment{ Target: payIntent.dest, Amount: payIntent.msat, FinalCLTVDelta: payIntent.cltvDelta, FeeLimit: payIntent.feeLimit, CltvLimit: payIntent.cltvLimit, PaymentHash: payIntent.rHash, RouteHints: payIntent.routeHints, OutgoingChannelID: payIntent.outgoingChannelID, LastHop: payIntent.lastHop, PaymentRequest: payIntent.payReq, PayAttemptTimeout: routing.DefaultPayAttemptTimeout, DestCustomRecords: payIntent.destCustomRecords, DestFeatures: payIntent.destFeatures, PaymentAddr: payIntent.paymentAddr, } preImage, route, routerErr = r.server.chanRouter.SendPayment( payment, ) } else { preImage, routerErr = r.server.chanRouter.SendToRoute( payIntent.rHash, payIntent.route, ) route = payIntent.route } // If the route failed, then we'll return a nil save err, but a non-nil // routing err. if routerErr != nil { rpcsLog.Warnf("Unable to send payment: %v", routerErr) return &paymentIntentResponse{ Err: routerErr, }, nil } return &paymentIntentResponse{ Route: route, Preimage: preImage, }, nil } // sendPayment takes a paymentStream (a source of pre-built routes or payment // requests) and continually attempt to dispatch payment requests written to // the write end of the stream. Responses will also be streamed back to the // client via the write end of the stream. This method is by both SendToRoute // and SendPayment as the logic is virtually identical. func (r *rpcServer) sendPayment(stream *paymentStream) error { payChan := make(chan *rpcPaymentIntent) errChan := make(chan error, 1) // We don't allow payments to be sent while the daemon itself is still // syncing as we may be trying to sent a payment over a "stale" // channel. if !r.server.Started() { return ErrServerNotActive } // TODO(roasbeef): check payment filter to see if already used? // In order to limit the level of concurrency and prevent a client from // attempting to OOM the server, we'll set up a semaphore to create an // upper ceiling on the number of outstanding payments. const numOutstandingPayments = 2000 htlcSema := make(chan struct{}, numOutstandingPayments) for i := 0; i < numOutstandingPayments; i++ { htlcSema <- struct{}{} } // We keep track of the running goroutines and set up a quit signal we // can use to request them to exit if the method returns because of an // encountered error. var wg sync.WaitGroup reqQuit := make(chan struct{}) defer close(reqQuit) // Launch a new goroutine to handle reading new payment requests from // the client. This way we can handle errors independently of blocking // and waiting for the next payment request to come through. // TODO(joostjager): Callers expect result to come in in the same order // as the request were sent, but this is far from guarantueed in the // code below. wg.Add(1) go func() { defer wg.Done() for { select { case <-reqQuit: return default: // Receive the next pending payment within the // stream sent by the client. If we read the // EOF sentinel, then the client has closed the // stream, and we can exit normally. nextPayment, err := stream.recv() if err == io.EOF { close(payChan) return } else if err != nil { rpcsLog.Errorf("Failed receiving from "+ "stream: %v", err) select { case errChan <- err: default: } return } // Populate the next payment, either from the // payment request, or from the explicitly set // fields. If the payment proto wasn't well // formed, then we'll send an error reply and // wait for the next payment. payIntent, err := r.extractPaymentIntent( nextPayment, ) if err != nil { if err := stream.send(&lnrpc.SendResponse{ PaymentError: err.Error(), PaymentHash: payIntent.rHash[:], }); err != nil { rpcsLog.Errorf("Failed "+ "sending on "+ "stream: %v", err) select { case errChan <- err: default: } return } continue } // If the payment was well formed, then we'll // send to the dispatch goroutine, or exit, // which ever comes first. select { case payChan <- &payIntent: case <-reqQuit: return } } } }() sendLoop: for { select { // If we encounter and error either during sending or // receiving, we return directly, closing the stream. case err := <-errChan: return err case <-r.quit: return errors.New("rpc server shutting down") case payIntent, ok := <-payChan: // If the receive loop is done, we break the send loop // and wait for the ongoing payments to finish before // exiting. if !ok { break sendLoop } // We launch a new goroutine to execute the current // payment so we can continue to serve requests while // this payment is being dispatched. wg.Add(1) go func() { defer wg.Done() // Attempt to grab a free semaphore slot, using // a defer to eventually release the slot // regardless of payment success. select { case <-htlcSema: case <-reqQuit: return } defer func() { htlcSema <- struct{}{} }() resp, saveErr := r.dispatchPaymentIntent( payIntent, ) switch { // If we were unable to save the state of the // payment, then we'll return the error to the // user, and terminate. case saveErr != nil: rpcsLog.Errorf("Failed dispatching "+ "payment intent: %v", saveErr) select { case errChan <- saveErr: default: } return // If we receive payment error than, instead of // terminating the stream, send error response // to the user. case resp.Err != nil: err := stream.send(&lnrpc.SendResponse{ PaymentError: resp.Err.Error(), PaymentHash: payIntent.rHash[:], }) if err != nil { rpcsLog.Errorf("Failed "+ "sending error "+ "response: %v", err) select { case errChan <- err: default: } } return } backend := r.routerBackend marshalledRouted, err := backend.MarshallRoute( resp.Route, ) if err != nil { errChan <- err return } err = stream.send(&lnrpc.SendResponse{ PaymentHash: payIntent.rHash[:], PaymentPreimage: resp.Preimage[:], PaymentRoute: marshalledRouted, }) if err != nil { rpcsLog.Errorf("Failed sending "+ "response: %v", err) select { case errChan <- err: default: } return } }() } } // Wait for all goroutines to finish before closing the stream. wg.Wait() return nil } // SendPaymentSync is the synchronous non-streaming version of SendPayment. // This RPC is intended to be consumed by clients of the REST proxy. // Additionally, this RPC expects the destination's public key and the payment // hash (if any) to be encoded as hex strings. func (r *rpcServer) SendPaymentSync(ctx context.Context, nextPayment *lnrpc.SendRequest) (*lnrpc.SendResponse, error) { return r.sendPaymentSync(ctx, &rpcPaymentRequest{ SendRequest: nextPayment, }) } // SendToRouteSync is the synchronous non-streaming version of SendToRoute. // This RPC is intended to be consumed by clients of the REST proxy. // Additionally, this RPC expects the payment hash (if any) to be encoded as // hex strings. func (r *rpcServer) SendToRouteSync(ctx context.Context, req *lnrpc.SendToRouteRequest) (*lnrpc.SendResponse, error) { if req.Route == nil { return nil, fmt.Errorf("unable to send, no routes provided") } paymentRequest, err := r.unmarshallSendToRouteRequest(req) if err != nil { return nil, err } return r.sendPaymentSync(ctx, paymentRequest) } // sendPaymentSync is the synchronous variant of sendPayment. It will block and // wait until the payment has been fully completed. func (r *rpcServer) sendPaymentSync(ctx context.Context, nextPayment *rpcPaymentRequest) (*lnrpc.SendResponse, error) { // We don't allow payments to be sent while the daemon itself is still // syncing as we may be trying to sent a payment over a "stale" // channel. if !r.server.Started() { return nil, ErrServerNotActive } // First we'll attempt to map the proto describing the next payment to // an intent that we can pass to local sub-systems. payIntent, err := r.extractPaymentIntent(nextPayment) if err != nil { return nil, err } // With the payment validated, we'll now attempt to dispatch the // payment. resp, saveErr := r.dispatchPaymentIntent(&payIntent) switch { case saveErr != nil: return nil, saveErr case resp.Err != nil: return &lnrpc.SendResponse{ PaymentError: resp.Err.Error(), PaymentHash: payIntent.rHash[:], }, nil } rpcRoute, err := r.routerBackend.MarshallRoute(resp.Route) if err != nil { return nil, err } return &lnrpc.SendResponse{ PaymentHash: payIntent.rHash[:], PaymentPreimage: resp.Preimage[:], PaymentRoute: rpcRoute, }, nil } // AddInvoice attempts to add a new invoice to the invoice database. Any // duplicated invoices are rejected, therefore all invoices *must* have a // unique payment preimage. func (r *rpcServer) AddInvoice(ctx context.Context, invoice *lnrpc.Invoice) (*lnrpc.AddInvoiceResponse, error) { defaultDelta := cfg.Bitcoin.TimeLockDelta if registeredChains.PrimaryChain() == litecoinChain { defaultDelta = cfg.Litecoin.TimeLockDelta } addInvoiceCfg := &invoicesrpc.AddInvoiceConfig{ AddInvoice: r.server.invoices.AddInvoice, IsChannelActive: r.server.htlcSwitch.HasActiveLink, ChainParams: activeNetParams.Params, NodeSigner: r.server.nodeSigner, MaxPaymentMSat: MaxPaymentMSat, DefaultCLTVExpiry: defaultDelta, ChanDB: r.server.chanDB, GenInvoiceFeatures: func() *lnwire.FeatureVector { return r.server.featureMgr.Get(feature.SetInvoice) }, } value, err := lnrpc.UnmarshallAmt(invoice.Value, invoice.ValueMsat) if err != nil { return nil, err } addInvoiceData := &invoicesrpc.AddInvoiceData{ Memo: invoice.Memo, Value: value, DescriptionHash: invoice.DescriptionHash, Expiry: invoice.Expiry, FallbackAddr: invoice.FallbackAddr, CltvExpiry: invoice.CltvExpiry, Private: invoice.Private, } if invoice.RPreimage != nil { preimage, err := lntypes.MakePreimage(invoice.RPreimage) if err != nil { return nil, err } addInvoiceData.Preimage = &preimage } hash, dbInvoice, err := invoicesrpc.AddInvoice( ctx, addInvoiceCfg, addInvoiceData, ) if err != nil { return nil, err } return &lnrpc.AddInvoiceResponse{ AddIndex: dbInvoice.AddIndex, PaymentRequest: string(dbInvoice.PaymentRequest), RHash: hash[:], }, nil } // LookupInvoice attempts to look up an invoice according to its payment hash. // The passed payment hash *must* be exactly 32 bytes, if not an error is // returned. func (r *rpcServer) LookupInvoice(ctx context.Context, req *lnrpc.PaymentHash) (*lnrpc.Invoice, error) { var ( payHash [32]byte rHash []byte err error ) // If the RHash as a raw string was provided, then decode that and use // that directly. Otherwise, we use the raw bytes provided. if req.RHashStr != "" { rHash, err = hex.DecodeString(req.RHashStr) if err != nil { return nil, err } } else { rHash = req.RHash } // Ensure that the payment hash is *exactly* 32-bytes. if len(rHash) != 0 && len(rHash) != 32 { return nil, fmt.Errorf("payment hash must be exactly "+ "32 bytes, is instead %v", len(rHash)) } copy(payHash[:], rHash) rpcsLog.Tracef("[lookupinvoice] searching for invoice %x", payHash[:]) invoice, err := r.server.invoices.LookupInvoice(payHash) if err != nil { return nil, err } rpcsLog.Tracef("[lookupinvoice] located invoice %v", newLogClosure(func() string { return spew.Sdump(invoice) })) rpcInvoice, err := invoicesrpc.CreateRPCInvoice( &invoice, activeNetParams.Params, ) if err != nil { return nil, err } return rpcInvoice, nil } // ListInvoices returns a list of all the invoices currently stored within the // database. Any active debug invoices are ignored. func (r *rpcServer) ListInvoices(ctx context.Context, req *lnrpc.ListInvoiceRequest) (*lnrpc.ListInvoiceResponse, error) { // If the number of invoices was not specified, then we'll default to // returning the latest 100 invoices. if req.NumMaxInvoices == 0 { req.NumMaxInvoices = 100 } // Next, we'll map the proto request into a format that is understood by // the database. q := channeldb.InvoiceQuery{ IndexOffset: req.IndexOffset, NumMaxInvoices: req.NumMaxInvoices, PendingOnly: req.PendingOnly, Reversed: req.Reversed, } invoiceSlice, err := r.server.chanDB.QueryInvoices(q) if err != nil { return nil, fmt.Errorf("unable to query invoices: %v", err) } // Before returning the response, we'll need to convert each invoice // into it's proto representation. resp := &lnrpc.ListInvoiceResponse{ Invoices: make([]*lnrpc.Invoice, len(invoiceSlice.Invoices)), FirstIndexOffset: invoiceSlice.FirstIndexOffset, LastIndexOffset: invoiceSlice.LastIndexOffset, } for i, invoice := range invoiceSlice.Invoices { resp.Invoices[i], err = invoicesrpc.CreateRPCInvoice( &invoice, activeNetParams.Params, ) if err != nil { return nil, err } } return resp, nil } // SubscribeInvoices returns a uni-directional stream (server -> client) for // notifying the client of newly added/settled invoices. func (r *rpcServer) SubscribeInvoices(req *lnrpc.InvoiceSubscription, updateStream lnrpc.Lightning_SubscribeInvoicesServer) error { invoiceClient := r.server.invoices.SubscribeNotifications( req.AddIndex, req.SettleIndex, ) defer invoiceClient.Cancel() for { select { case newInvoice := <-invoiceClient.NewInvoices: rpcInvoice, err := invoicesrpc.CreateRPCInvoice( newInvoice, activeNetParams.Params, ) if err != nil { return err } if err := updateStream.Send(rpcInvoice); err != nil { return err } case settledInvoice := <-invoiceClient.SettledInvoices: rpcInvoice, err := invoicesrpc.CreateRPCInvoice( settledInvoice, activeNetParams.Params, ) if err != nil { return err } if err := updateStream.Send(rpcInvoice); err != nil { return err } case <-r.quit: return nil } } } // SubscribeTransactions creates a uni-directional stream (server -> client) in // which any newly discovered transactions relevant to the wallet are sent // over. func (r *rpcServer) SubscribeTransactions(req *lnrpc.GetTransactionsRequest, updateStream lnrpc.Lightning_SubscribeTransactionsServer) error { txClient, err := r.server.cc.wallet.SubscribeTransactions() if err != nil { return err } defer txClient.Cancel() for { select { case tx := <-txClient.ConfirmedTransactions(): destAddresses := make([]string, 0, len(tx.DestAddresses)) for _, destAddress := range tx.DestAddresses { destAddresses = append(destAddresses, destAddress.EncodeAddress()) } detail := &lnrpc.Transaction{ TxHash: tx.Hash.String(), Amount: int64(tx.Value), NumConfirmations: tx.NumConfirmations, BlockHash: tx.BlockHash.String(), BlockHeight: tx.BlockHeight, TimeStamp: tx.Timestamp, TotalFees: tx.TotalFees, DestAddresses: destAddresses, RawTxHex: hex.EncodeToString(tx.RawTx), } if err := updateStream.Send(detail); err != nil { return err } case tx := <-txClient.UnconfirmedTransactions(): var destAddresses []string for _, destAddress := range tx.DestAddresses { destAddresses = append(destAddresses, destAddress.EncodeAddress()) } detail := &lnrpc.Transaction{ TxHash: tx.Hash.String(), Amount: int64(tx.Value), TimeStamp: tx.Timestamp, TotalFees: tx.TotalFees, DestAddresses: destAddresses, RawTxHex: hex.EncodeToString(tx.RawTx), } if err := updateStream.Send(detail); err != nil { return err } case <-r.quit: return nil } } } // GetTransactions returns a list of describing all the known transactions // relevant to the wallet. func (r *rpcServer) GetTransactions(ctx context.Context, _ *lnrpc.GetTransactionsRequest) (*lnrpc.TransactionDetails, error) { // TODO(roasbeef): add pagination support transactions, err := r.server.cc.wallet.ListTransactionDetails() if err != nil { return nil, err } txDetails := &lnrpc.TransactionDetails{ Transactions: make([]*lnrpc.Transaction, len(transactions)), } for i, tx := range transactions { var destAddresses []string for _, destAddress := range tx.DestAddresses { destAddresses = append(destAddresses, destAddress.EncodeAddress()) } // We also get unconfirmed transactions, so BlockHash can be // nil. blockHash := "" if tx.BlockHash != nil { blockHash = tx.BlockHash.String() } txDetails.Transactions[i] = &lnrpc.Transaction{ TxHash: tx.Hash.String(), Amount: int64(tx.Value), NumConfirmations: tx.NumConfirmations, BlockHash: blockHash, BlockHeight: tx.BlockHeight, TimeStamp: tx.Timestamp, TotalFees: tx.TotalFees, DestAddresses: destAddresses, RawTxHex: hex.EncodeToString(tx.RawTx), } } return txDetails, nil } // DescribeGraph returns a description of the latest graph state from the PoV // of the node. The graph information is partitioned into two components: all // the nodes/vertexes, and all the edges that connect the vertexes themselves. // As this is a directed graph, the edges also contain the node directional // specific routing policy which includes: the time lock delta, fee // information, etc. func (r *rpcServer) DescribeGraph(ctx context.Context, req *lnrpc.ChannelGraphRequest) (*lnrpc.ChannelGraph, error) { resp := &lnrpc.ChannelGraph{} includeUnannounced := req.IncludeUnannounced // Obtain the pointer to the global singleton channel graph, this will // provide a consistent view of the graph due to bolt db's // transactional model. graph := r.server.chanDB.ChannelGraph() // First iterate through all the known nodes (connected or unconnected // within the graph), collating their current state into the RPC // response. err := graph.ForEachNode(nil, func(_ kvdb.ReadTx, node *channeldb.LightningNode) error { nodeAddrs := make([]*lnrpc.NodeAddress, 0) for _, addr := range node.Addresses { nodeAddr := &lnrpc.NodeAddress{ Network: addr.Network(), Addr: addr.String(), } nodeAddrs = append(nodeAddrs, nodeAddr) } lnNode := &lnrpc.LightningNode{ LastUpdate: uint32(node.LastUpdate.Unix()), PubKey: hex.EncodeToString(node.PubKeyBytes[:]), Addresses: nodeAddrs, Alias: node.Alias, Color: routing.EncodeHexColor(node.Color), Features: invoicesrpc.CreateRPCFeatures(node.Features), } resp.Nodes = append(resp.Nodes, lnNode) return nil }) if err != nil { return nil, err } // Next, for each active channel we know of within the graph, create a // similar response which details both the edge information as well as // the routing policies of th nodes connecting the two edges. err = graph.ForEachChannel(func(edgeInfo *channeldb.ChannelEdgeInfo, c1, c2 *channeldb.ChannelEdgePolicy) error { // Do not include unannounced channels unless specifically // requested. Unannounced channels include both private channels as // well as public channels whose authentication proof were not // confirmed yet, hence were not announced. if !includeUnannounced && edgeInfo.AuthProof == nil { return nil } edge := marshalDbEdge(edgeInfo, c1, c2) resp.Edges = append(resp.Edges, edge) return nil }) if err != nil && err != channeldb.ErrGraphNoEdgesFound { return nil, err } return resp, nil } func marshalDbEdge(edgeInfo *channeldb.ChannelEdgeInfo, c1, c2 *channeldb.ChannelEdgePolicy) *lnrpc.ChannelEdge { // Order the edges by increasing pubkey. if bytes.Compare(edgeInfo.NodeKey2Bytes[:], edgeInfo.NodeKey1Bytes[:]) < 0 { c2, c1 = c1, c2 } var lastUpdate int64 if c1 != nil { lastUpdate = c1.LastUpdate.Unix() } if c2 != nil && c2.LastUpdate.Unix() > lastUpdate { lastUpdate = c2.LastUpdate.Unix() } edge := &lnrpc.ChannelEdge{ ChannelId: edgeInfo.ChannelID, ChanPoint: edgeInfo.ChannelPoint.String(), // TODO(roasbeef): update should be on edge info itself LastUpdate: uint32(lastUpdate), Node1Pub: hex.EncodeToString(edgeInfo.NodeKey1Bytes[:]), Node2Pub: hex.EncodeToString(edgeInfo.NodeKey2Bytes[:]), Capacity: int64(edgeInfo.Capacity), } if c1 != nil { edge.Node1Policy = &lnrpc.RoutingPolicy{ TimeLockDelta: uint32(c1.TimeLockDelta), MinHtlc: int64(c1.MinHTLC), MaxHtlcMsat: uint64(c1.MaxHTLC), FeeBaseMsat: int64(c1.FeeBaseMSat), FeeRateMilliMsat: int64(c1.FeeProportionalMillionths), Disabled: c1.ChannelFlags&lnwire.ChanUpdateDisabled != 0, LastUpdate: uint32(c1.LastUpdate.Unix()), } } if c2 != nil { edge.Node2Policy = &lnrpc.RoutingPolicy{ TimeLockDelta: uint32(c2.TimeLockDelta), MinHtlc: int64(c2.MinHTLC), MaxHtlcMsat: uint64(c2.MaxHTLC), FeeBaseMsat: int64(c2.FeeBaseMSat), FeeRateMilliMsat: int64(c2.FeeProportionalMillionths), Disabled: c2.ChannelFlags&lnwire.ChanUpdateDisabled != 0, LastUpdate: uint32(c2.LastUpdate.Unix()), } } return edge } // GetNodeMetrics returns all available node metrics calculated from the // current channel graph. func (r *rpcServer) GetNodeMetrics(ctx context.Context, req *lnrpc.NodeMetricsRequest) (*lnrpc.NodeMetricsResponse, error) { // Get requested metric types. getCentrality := false for _, t := range req.Types { if t == lnrpc.NodeMetricType_BETWEENNESS_CENTRALITY { getCentrality = true } } // Only centrality can be requested for now. if !getCentrality { return nil, nil } resp := &lnrpc.NodeMetricsResponse{ BetweennessCentrality: make(map[string]*lnrpc.FloatMetric), } // Obtain the pointer to the global singleton channel graph, this will // provide a consistent view of the graph due to bolt db's // transactional model. graph := r.server.chanDB.ChannelGraph() // Calculate betweenness centrality if requested. Note that depending on the // graph size, this may take up to a few minutes. channelGraph := autopilot.ChannelGraphFromDatabase(graph) centralityMetric, err := autopilot.NewBetweennessCentralityMetric( runtime.NumCPU(), ) if err != nil { return nil, err } if err := centralityMetric.Refresh(channelGraph); err != nil { return nil, err } // Fill normalized and non normalized centrality. centrality := centralityMetric.GetMetric(true) for nodeID, val := range centrality { resp.BetweennessCentrality[hex.EncodeToString(nodeID[:])] = &lnrpc.FloatMetric{ NormalizedValue: val, } } centrality = centralityMetric.GetMetric(false) for nodeID, val := range centrality { resp.BetweennessCentrality[hex.EncodeToString(nodeID[:])].Value = val } return resp, nil } // GetChanInfo returns the latest authenticated network announcement for the // given channel identified by its channel ID: an 8-byte integer which uniquely // identifies the location of transaction's funding output within the block // chain. func (r *rpcServer) GetChanInfo(ctx context.Context, in *lnrpc.ChanInfoRequest) (*lnrpc.ChannelEdge, error) { graph := r.server.chanDB.ChannelGraph() edgeInfo, edge1, edge2, err := graph.FetchChannelEdgesByID(in.ChanId) if err != nil { return nil, err } // Convert the database's edge format into the network/RPC edge format // which couples the edge itself along with the directional node // routing policies of each node involved within the channel. channelEdge := marshalDbEdge(edgeInfo, edge1, edge2) return channelEdge, nil } // GetNodeInfo returns the latest advertised and aggregate authenticated // channel information for the specified node identified by its public key. func (r *rpcServer) GetNodeInfo(ctx context.Context, in *lnrpc.NodeInfoRequest) (*lnrpc.NodeInfo, error) { graph := r.server.chanDB.ChannelGraph() // First, parse the hex-encoded public key into a full in-memory public // key object we can work with for querying. pubKey, err := route.NewVertexFromStr(in.PubKey) if err != nil { return nil, err } // With the public key decoded, attempt to fetch the node corresponding // to this public key. If the node cannot be found, then an error will // be returned. node, err := graph.FetchLightningNode(nil, pubKey) if err != nil { return nil, err } // With the node obtained, we'll now iterate through all its out going // edges to gather some basic statistics about its out going channels. var ( numChannels uint32 totalCapacity btcutil.Amount channels []*lnrpc.ChannelEdge ) if err := node.ForEachChannel(nil, func(_ kvdb.ReadTx, edge *channeldb.ChannelEdgeInfo, c1, c2 *channeldb.ChannelEdgePolicy) error { numChannels++ totalCapacity += edge.Capacity // Only populate the node's channels if the user requested them. if in.IncludeChannels { // Do not include unannounced channels - private // channels or public channels whose authentication // proof were not confirmed yet. if edge.AuthProof == nil { return nil } // Convert the database's edge format into the // network/RPC edge format. channelEdge := marshalDbEdge(edge, c1, c2) channels = append(channels, channelEdge) } return nil }); err != nil { return nil, err } nodeAddrs := make([]*lnrpc.NodeAddress, 0) for _, addr := range node.Addresses { nodeAddr := &lnrpc.NodeAddress{ Network: addr.Network(), Addr: addr.String(), } nodeAddrs = append(nodeAddrs, nodeAddr) } features := invoicesrpc.CreateRPCFeatures(node.Features) return &lnrpc.NodeInfo{ Node: &lnrpc.LightningNode{ LastUpdate: uint32(node.LastUpdate.Unix()), PubKey: in.PubKey, Addresses: nodeAddrs, Alias: node.Alias, Color: routing.EncodeHexColor(node.Color), Features: features, }, NumChannels: numChannels, TotalCapacity: int64(totalCapacity), Channels: channels, }, nil } // QueryRoutes attempts to query the daemons' Channel Router for a possible // route to a target destination capable of carrying a specific amount of // satoshis within the route's flow. The retuned route contains the full // details required to craft and send an HTLC, also including the necessary // information that should be present within the Sphinx packet encapsulated // within the HTLC. // // TODO(roasbeef): should return a slice of routes in reality // * create separate PR to send based on well formatted route func (r *rpcServer) QueryRoutes(ctx context.Context, in *lnrpc.QueryRoutesRequest) (*lnrpc.QueryRoutesResponse, error) { return r.routerBackend.QueryRoutes(ctx, in) } // GetNetworkInfo returns some basic stats about the known channel graph from // the PoV of the node. func (r *rpcServer) GetNetworkInfo(ctx context.Context, _ *lnrpc.NetworkInfoRequest) (*lnrpc.NetworkInfo, error) { graph := r.server.chanDB.ChannelGraph() var ( numNodes uint32 numChannels uint32 maxChanOut uint32 totalNetworkCapacity btcutil.Amount minChannelSize btcutil.Amount = math.MaxInt64 maxChannelSize btcutil.Amount medianChanSize btcutil.Amount ) // We'll use this map to de-duplicate channels during our traversal. // This is needed since channels are directional, so there will be two // edges for each channel within the graph. seenChans := make(map[uint64]struct{}) // We also keep a list of all encountered capacities, in order to // calculate the median channel size. var allChans []btcutil.Amount // We'll run through all the known nodes in the within our view of the // network, tallying up the total number of nodes, and also gathering // each node so we can measure the graph diameter and degree stats // below. if err := graph.ForEachNode(nil, func(tx kvdb.ReadTx, node *channeldb.LightningNode) error { // Increment the total number of nodes with each iteration. numNodes++ // For each channel we'll compute the out degree of each node, // and also update our running tallies of the min/max channel // capacity, as well as the total channel capacity. We pass // through the db transaction from the outer view so we can // re-use it within this inner view. var outDegree uint32 if err := node.ForEachChannel(tx, func(_ kvdb.ReadTx, edge *channeldb.ChannelEdgeInfo, _, _ *channeldb.ChannelEdgePolicy) error { // Bump up the out degree for this node for each // channel encountered. outDegree++ // If we've already seen this channel, then we'll // return early to ensure that we don't double-count // stats. if _, ok := seenChans[edge.ChannelID]; ok { return nil } // Compare the capacity of this channel against the // running min/max to see if we should update the // extrema. chanCapacity := edge.Capacity if chanCapacity < minChannelSize { minChannelSize = chanCapacity } if chanCapacity > maxChannelSize { maxChannelSize = chanCapacity } // Accumulate the total capacity of this channel to the // network wide-capacity. totalNetworkCapacity += chanCapacity numChannels++ seenChans[edge.ChannelID] = struct{}{} allChans = append(allChans, edge.Capacity) return nil }); err != nil { return err } // Finally, if the out degree of this node is greater than what // we've seen so far, update the maxChanOut variable. if outDegree > maxChanOut { maxChanOut = outDegree } return nil }); err != nil { return nil, err } // Query the graph for the current number of zombie channels. numZombies, err := graph.NumZombies() if err != nil { return nil, err } // Find the median. medianChanSize = autopilot.Median(allChans) // If we don't have any channels, then reset the minChannelSize to zero // to avoid outputting NaN in encoded JSON. if numChannels == 0 { minChannelSize = 0 } // TODO(roasbeef): graph diameter // TODO(roasbeef): also add oldest channel? netInfo := &lnrpc.NetworkInfo{ MaxOutDegree: maxChanOut, AvgOutDegree: float64(2*numChannels) / float64(numNodes), NumNodes: numNodes, NumChannels: numChannels, TotalNetworkCapacity: int64(totalNetworkCapacity), AvgChannelSize: float64(totalNetworkCapacity) / float64(numChannels), MinChannelSize: int64(minChannelSize), MaxChannelSize: int64(maxChannelSize), MedianChannelSizeSat: int64(medianChanSize), NumZombieChans: numZombies, } // Similarly, if we don't have any channels, then we'll also set the // average channel size to zero in order to avoid weird JSON encoding // outputs. if numChannels == 0 { netInfo.AvgChannelSize = 0 } return netInfo, nil } // StopDaemon will send a shutdown request to the interrupt handler, triggering // a graceful shutdown of the daemon. func (r *rpcServer) StopDaemon(ctx context.Context, _ *lnrpc.StopRequest) (*lnrpc.StopResponse, error) { signal.RequestShutdown() return &lnrpc.StopResponse{}, nil } // SubscribeChannelGraph launches a streaming RPC that allows the caller to // receive notifications upon any changes the channel graph topology from the // review of the responding node. Events notified include: new nodes coming // online, nodes updating their authenticated attributes, new channels being // advertised, updates in the routing policy for a directional channel edge, // and finally when prior channels are closed on-chain. func (r *rpcServer) SubscribeChannelGraph(req *lnrpc.GraphTopologySubscription, updateStream lnrpc.Lightning_SubscribeChannelGraphServer) error { // First, we start by subscribing to a new intent to receive // notifications from the channel router. client, err := r.server.chanRouter.SubscribeTopology() if err != nil { return err } // Ensure that the resources for the topology update client is cleaned // up once either the server, or client exists. defer client.Cancel() for { select { // A new update has been sent by the channel router, we'll // marshal it into the form expected by the gRPC client, then // send it off. case topChange, ok := <-client.TopologyChanges: // If the second value from the channel read is nil, // then this means that the channel router is exiting // or the notification client was canceled. So we'll // exit early. if !ok { return errors.New("server shutting down") } // Convert the struct from the channel router into the // form expected by the gRPC service then send it off // to the client. graphUpdate := marshallTopologyChange(topChange) if err := updateStream.Send(graphUpdate); err != nil { return err } // The server is quitting, so we'll exit immediately. Returning // nil will close the clients read end of the stream. case <-r.quit: return nil } } } // marshallTopologyChange performs a mapping from the topology change struct // returned by the router to the form of notifications expected by the current // gRPC service. func marshallTopologyChange(topChange *routing.TopologyChange) *lnrpc.GraphTopologyUpdate { // encodeKey is a simple helper function that converts a live public // key into a hex-encoded version of the compressed serialization for // the public key. encodeKey := func(k *btcec.PublicKey) string { return hex.EncodeToString(k.SerializeCompressed()) } nodeUpdates := make([]*lnrpc.NodeUpdate, len(topChange.NodeUpdates)) for i, nodeUpdate := range topChange.NodeUpdates { addrs := make([]string, len(nodeUpdate.Addresses)) for i, addr := range nodeUpdate.Addresses { addrs[i] = addr.String() } nodeUpdates[i] = &lnrpc.NodeUpdate{ Addresses: addrs, IdentityKey: encodeKey(nodeUpdate.IdentityKey), GlobalFeatures: nodeUpdate.GlobalFeatures, Alias: nodeUpdate.Alias, Color: nodeUpdate.Color, } } channelUpdates := make([]*lnrpc.ChannelEdgeUpdate, len(topChange.ChannelEdgeUpdates)) for i, channelUpdate := range topChange.ChannelEdgeUpdates { channelUpdates[i] = &lnrpc.ChannelEdgeUpdate{ ChanId: channelUpdate.ChanID, ChanPoint: &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: channelUpdate.ChanPoint.Hash[:], }, OutputIndex: channelUpdate.ChanPoint.Index, }, Capacity: int64(channelUpdate.Capacity), RoutingPolicy: &lnrpc.RoutingPolicy{ TimeLockDelta: uint32(channelUpdate.TimeLockDelta), MinHtlc: int64(channelUpdate.MinHTLC), MaxHtlcMsat: uint64(channelUpdate.MaxHTLC), FeeBaseMsat: int64(channelUpdate.BaseFee), FeeRateMilliMsat: int64(channelUpdate.FeeRate), Disabled: channelUpdate.Disabled, }, AdvertisingNode: encodeKey(channelUpdate.AdvertisingNode), ConnectingNode: encodeKey(channelUpdate.ConnectingNode), } } closedChans := make([]*lnrpc.ClosedChannelUpdate, len(topChange.ClosedChannels)) for i, closedChan := range topChange.ClosedChannels { closedChans[i] = &lnrpc.ClosedChannelUpdate{ ChanId: closedChan.ChanID, Capacity: int64(closedChan.Capacity), ClosedHeight: closedChan.ClosedHeight, ChanPoint: &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: closedChan.ChanPoint.Hash[:], }, OutputIndex: closedChan.ChanPoint.Index, }, } } return &lnrpc.GraphTopologyUpdate{ NodeUpdates: nodeUpdates, ChannelUpdates: channelUpdates, ClosedChans: closedChans, } } // ListPayments returns a list of outgoing payments determined by a paginated // database query. func (r *rpcServer) ListPayments(ctx context.Context, req *lnrpc.ListPaymentsRequest) (*lnrpc.ListPaymentsResponse, error) { rpcsLog.Debugf("[ListPayments]") query := channeldb.PaymentsQuery{ IndexOffset: req.IndexOffset, MaxPayments: req.MaxPayments, Reversed: req.Reversed, IncludeIncomplete: req.IncludeIncomplete, } // If the maximum number of payments wasn't specified, then we'll // default to return the maximal number of payments representable. if req.MaxPayments == 0 { query.MaxPayments = math.MaxUint64 } paymentsQuerySlice, err := r.server.chanDB.QueryPayments(query) if err != nil { return nil, err } paymentsResp := &lnrpc.ListPaymentsResponse{ LastIndexOffset: paymentsQuerySlice.LastIndexOffset, FirstIndexOffset: paymentsQuerySlice.FirstIndexOffset, } for _, payment := range paymentsQuerySlice.Payments { payment := payment rpcPayment, err := r.routerBackend.MarshallPayment(&payment) if err != nil { return nil, err } paymentsResp.Payments = append( paymentsResp.Payments, rpcPayment, ) } return paymentsResp, nil } // DeleteAllPayments deletes all outgoing payments from DB. func (r *rpcServer) DeleteAllPayments(ctx context.Context, _ *lnrpc.DeleteAllPaymentsRequest) (*lnrpc.DeleteAllPaymentsResponse, error) { rpcsLog.Debugf("[DeleteAllPayments]") if err := r.server.chanDB.DeletePayments(); err != nil { return nil, err } return &lnrpc.DeleteAllPaymentsResponse{}, nil } // DebugLevel allows a caller to programmatically set the logging verbosity of // lnd. The logging can be targeted according to a coarse daemon-wide logging // level, or in a granular fashion to specify the logging for a target // sub-system. func (r *rpcServer) DebugLevel(ctx context.Context, req *lnrpc.DebugLevelRequest) (*lnrpc.DebugLevelResponse, error) { // If show is set, then we simply print out the list of available // sub-systems. if req.Show { return &lnrpc.DebugLevelResponse{ SubSystems: strings.Join( logWriter.SupportedSubsystems(), " ", ), }, nil } rpcsLog.Infof("[debuglevel] changing debug level to: %v", req.LevelSpec) // Otherwise, we'll attempt to set the logging level using the // specified level spec. err := build.ParseAndSetDebugLevels(req.LevelSpec, logWriter) if err != nil { return nil, err } return &lnrpc.DebugLevelResponse{}, nil } // DecodePayReq takes an encoded payment request string and attempts to decode // it, returning a full description of the conditions encoded within the // payment request. func (r *rpcServer) DecodePayReq(ctx context.Context, req *lnrpc.PayReqString) (*lnrpc.PayReq, error) { rpcsLog.Tracef("[decodepayreq] decoding: %v", req.PayReq) // Fist we'll attempt to decode the payment request string, if the // request is invalid or the checksum doesn't match, then we'll exit // here with an error. payReq, err := zpay32.Decode(req.PayReq, activeNetParams.Params) if err != nil { return nil, err } // Let the fields default to empty strings. desc := "" if payReq.Description != nil { desc = *payReq.Description } descHash := []byte("") if payReq.DescriptionHash != nil { descHash = payReq.DescriptionHash[:] } fallbackAddr := "" if payReq.FallbackAddr != nil { fallbackAddr = payReq.FallbackAddr.String() } // Expiry time will default to 3600 seconds if not specified // explicitly. expiry := int64(payReq.Expiry().Seconds()) // Convert between the `lnrpc` and `routing` types. routeHints := invoicesrpc.CreateRPCRouteHints(payReq.RouteHints) var amtSat, amtMsat int64 if payReq.MilliSat != nil { amtSat = int64(payReq.MilliSat.ToSatoshis()) amtMsat = int64(*payReq.MilliSat) } // Extract the payment address from the payment request, if present. var paymentAddr []byte if payReq.PaymentAddr != nil { paymentAddr = payReq.PaymentAddr[:] } dest := payReq.Destination.SerializeCompressed() return &lnrpc.PayReq{ Destination: hex.EncodeToString(dest), PaymentHash: hex.EncodeToString(payReq.PaymentHash[:]), NumSatoshis: amtSat, NumMsat: amtMsat, Timestamp: payReq.Timestamp.Unix(), Description: desc, DescriptionHash: hex.EncodeToString(descHash[:]), FallbackAddr: fallbackAddr, Expiry: expiry, CltvExpiry: int64(payReq.MinFinalCLTVExpiry()), RouteHints: routeHints, PaymentAddr: paymentAddr, Features: invoicesrpc.CreateRPCFeatures(payReq.Features), }, nil } // feeBase is the fixed point that fee rate computation are performed over. // Nodes on the network advertise their fee rate using this point as a base. // This means that the minimal possible fee rate if 1e-6, or 0.000001, or // 0.0001%. const feeBase = 1000000 // FeeReport allows the caller to obtain a report detailing the current fee // schedule enforced by the node globally for each channel. func (r *rpcServer) FeeReport(ctx context.Context, _ *lnrpc.FeeReportRequest) (*lnrpc.FeeReportResponse, error) { // TODO(roasbeef): use UnaryInterceptor to add automated logging rpcsLog.Debugf("[feereport]") channelGraph := r.server.chanDB.ChannelGraph() selfNode, err := channelGraph.SourceNode() if err != nil { return nil, err } var feeReports []*lnrpc.ChannelFeeReport err = selfNode.ForEachChannel(nil, func(_ kvdb.ReadTx, chanInfo *channeldb.ChannelEdgeInfo, edgePolicy, _ *channeldb.ChannelEdgePolicy) error { // Self node should always have policies for its channels. if edgePolicy == nil { return fmt.Errorf("no policy for outgoing channel %v ", chanInfo.ChannelID) } // We'll compute the effective fee rate by converting from a // fixed point fee rate to a floating point fee rate. The fee // rate field in the database the amount of mSAT charged per // 1mil mSAT sent, so will divide by this to get the proper fee // rate. feeRateFixedPoint := edgePolicy.FeeProportionalMillionths feeRate := float64(feeRateFixedPoint) / float64(feeBase) // TODO(roasbeef): also add stats for revenue for each channel feeReports = append(feeReports, &lnrpc.ChannelFeeReport{ ChanId: chanInfo.ChannelID, ChannelPoint: chanInfo.ChannelPoint.String(), BaseFeeMsat: int64(edgePolicy.FeeBaseMSat), FeePerMil: int64(feeRateFixedPoint), FeeRate: feeRate, }) return nil }) if err != nil { return nil, err } fwdEventLog := r.server.chanDB.ForwardingLog() // computeFeeSum is a helper function that computes the total fees for // a particular time slice described by a forwarding event query. computeFeeSum := func(query channeldb.ForwardingEventQuery) (lnwire.MilliSatoshi, error) { var totalFees lnwire.MilliSatoshi // We'll continue to fetch the next query and accumulate the // fees until the next query returns no events. for { timeSlice, err := fwdEventLog.Query(query) if err != nil { return 0, err } // If the timeslice is empty, then we'll return as // we've retrieved all the entries in this range. if len(timeSlice.ForwardingEvents) == 0 { break } // Otherwise, we'll tally up an accumulate the total // fees for this time slice. for _, event := range timeSlice.ForwardingEvents { fee := event.AmtIn - event.AmtOut totalFees += fee } // We'll now take the last offset index returned as // part of this response, and modify our query to start // at this index. This has a pagination effect in the // case that our query bounds has more than 100k // entries. query.IndexOffset = timeSlice.LastIndexOffset } return totalFees, nil } now := time.Now() // Before we perform the queries below, we'll instruct the switch to // flush any pending events to disk. This ensure we get a complete // snapshot at this particular time. if err := r.server.htlcSwitch.FlushForwardingEvents(); err != nil { return nil, fmt.Errorf("unable to flush forwarding "+ "events: %v", err) } // In addition to returning the current fee schedule for each channel. // We'll also perform a series of queries to obtain the total fees // earned over the past day, week, and month. dayQuery := channeldb.ForwardingEventQuery{ StartTime: now.Add(-time.Hour * 24), EndTime: now, NumMaxEvents: 1000, } dayFees, err := computeFeeSum(dayQuery) if err != nil { return nil, fmt.Errorf("unable to retrieve day fees: %v", err) } weekQuery := channeldb.ForwardingEventQuery{ StartTime: now.Add(-time.Hour * 24 * 7), EndTime: now, NumMaxEvents: 1000, } weekFees, err := computeFeeSum(weekQuery) if err != nil { return nil, fmt.Errorf("unable to retrieve day fees: %v", err) } monthQuery := channeldb.ForwardingEventQuery{ StartTime: now.Add(-time.Hour * 24 * 30), EndTime: now, NumMaxEvents: 1000, } monthFees, err := computeFeeSum(monthQuery) if err != nil { return nil, fmt.Errorf("unable to retrieve day fees: %v", err) } return &lnrpc.FeeReportResponse{ ChannelFees: feeReports, DayFeeSum: uint64(dayFees.ToSatoshis()), WeekFeeSum: uint64(weekFees.ToSatoshis()), MonthFeeSum: uint64(monthFees.ToSatoshis()), }, nil } // minFeeRate is the smallest permitted fee rate within the network. This is // derived by the fact that fee rates are computed using a fixed point of // 1,000,000. As a result, the smallest representable fee rate is 1e-6, or // 0.000001, or 0.0001%. const minFeeRate = 1e-6 // UpdateChannelPolicy allows the caller to update the channel forwarding policy // for all channels globally, or a particular channel. func (r *rpcServer) UpdateChannelPolicy(ctx context.Context, req *lnrpc.PolicyUpdateRequest) (*lnrpc.PolicyUpdateResponse, error) { var targetChans []wire.OutPoint switch scope := req.Scope.(type) { // If the request is targeting all active channels, then we don't need // target any channels by their channel point. case *lnrpc.PolicyUpdateRequest_Global: // Otherwise, we're targeting an individual channel by its channel // point. case *lnrpc.PolicyUpdateRequest_ChanPoint: txid, err := GetChanPointFundingTxid(scope.ChanPoint) if err != nil { return nil, err } targetChans = append(targetChans, wire.OutPoint{ Hash: *txid, Index: scope.ChanPoint.OutputIndex, }) default: return nil, fmt.Errorf("unknown scope: %v", scope) } switch { // As a sanity check, if the fee isn't zero, we'll ensure that the // passed fee rate is below 1e-6, or the lowest allowed non-zero fee // rate expressible within the protocol. case req.FeeRate != 0 && req.FeeRate < minFeeRate: return nil, fmt.Errorf("fee rate of %v is too small, min fee "+ "rate is %v", req.FeeRate, minFeeRate) // We'll also ensure that the user isn't setting a CLTV delta that // won't give outgoing HTLCs enough time to fully resolve if needed. case req.TimeLockDelta < minTimeLockDelta: return nil, fmt.Errorf("time lock delta of %v is too small, "+ "minimum supported is %v", req.TimeLockDelta, minTimeLockDelta) } // We'll also need to convert the floating point fee rate we accept // over RPC to the fixed point rate that we use within the protocol. We // do this by multiplying the passed fee rate by the fee base. This // gives us the fixed point, scaled by 1 million that's used within the // protocol. feeRateFixed := uint32(req.FeeRate * feeBase) baseFeeMsat := lnwire.MilliSatoshi(req.BaseFeeMsat) feeSchema := routing.FeeSchema{ BaseFee: baseFeeMsat, FeeRate: feeRateFixed, } maxHtlc := lnwire.MilliSatoshi(req.MaxHtlcMsat) var minHtlc *lnwire.MilliSatoshi if req.MinHtlcMsatSpecified { min := lnwire.MilliSatoshi(req.MinHtlcMsat) minHtlc = &min } chanPolicy := routing.ChannelPolicy{ FeeSchema: feeSchema, TimeLockDelta: req.TimeLockDelta, MaxHTLC: maxHtlc, MinHTLC: minHtlc, } rpcsLog.Debugf("[updatechanpolicy] updating channel policy base_fee=%v, "+ "rate_float=%v, rate_fixed=%v, time_lock_delta: %v, "+ "min_htlc=%v, max_htlc=%v, targets=%v", req.BaseFeeMsat, req.FeeRate, feeRateFixed, req.TimeLockDelta, minHtlc, maxHtlc, spew.Sdump(targetChans)) // With the scope resolved, we'll now send this to the local channel // manager so it can propagate the new policy for our target channel(s). err := r.server.localChanMgr.UpdatePolicy(chanPolicy, targetChans...) if err != nil { return nil, err } return &lnrpc.PolicyUpdateResponse{}, nil } // ForwardingHistory allows the caller to query the htlcswitch for a record of // all HTLC's forwarded within the target time range, and integer offset within // that time range. If no time-range is specified, then the first chunk of the // past 24 hrs of forwarding history are returned. // A list of forwarding events are returned. The size of each forwarding event // is 40 bytes, and the max message size able to be returned in gRPC is 4 MiB. // In order to safely stay under this max limit, we'll return 50k events per // response. Each response has the index offset of the last entry. The index // offset can be provided to the request to allow the caller to skip a series // of records. func (r *rpcServer) ForwardingHistory(ctx context.Context, req *lnrpc.ForwardingHistoryRequest) (*lnrpc.ForwardingHistoryResponse, error) { rpcsLog.Debugf("[forwardinghistory]") // Before we perform the queries below, we'll instruct the switch to // flush any pending events to disk. This ensure we get a complete // snapshot at this particular time. if err := r.server.htlcSwitch.FlushForwardingEvents(); err != nil { return nil, fmt.Errorf("unable to flush forwarding "+ "events: %v", err) } var ( startTime, endTime time.Time numEvents uint32 ) // startTime defaults to the Unix epoch (0 unixtime, or midnight 01-01-1970). startTime = time.Unix(int64(req.StartTime), 0) // If the end time wasn't specified, assume a default end time of now. if req.EndTime == 0 { now := time.Now() endTime = now } else { endTime = time.Unix(int64(req.EndTime), 0) } // If the number of events wasn't specified, then we'll default to // returning the last 100 events. numEvents = req.NumMaxEvents if numEvents == 0 { numEvents = 100 } // Next, we'll map the proto request into a format that is understood by // the forwarding log. eventQuery := channeldb.ForwardingEventQuery{ StartTime: startTime, EndTime: endTime, IndexOffset: req.IndexOffset, NumMaxEvents: numEvents, } timeSlice, err := r.server.chanDB.ForwardingLog().Query(eventQuery) if err != nil { return nil, fmt.Errorf("unable to query forwarding log: %v", err) } // TODO(roasbeef): add settlement latency? // * use FPE on all records? // With the events retrieved, we'll now map them into the proper proto // response. // // TODO(roasbeef): show in ns for the outside? resp := &lnrpc.ForwardingHistoryResponse{ ForwardingEvents: make([]*lnrpc.ForwardingEvent, len(timeSlice.ForwardingEvents)), LastOffsetIndex: timeSlice.LastIndexOffset, } for i, event := range timeSlice.ForwardingEvents { amtInMsat := event.AmtIn amtOutMsat := event.AmtOut feeMsat := event.AmtIn - event.AmtOut resp.ForwardingEvents[i] = &lnrpc.ForwardingEvent{ Timestamp: uint64(event.Timestamp.Unix()), ChanIdIn: event.IncomingChanID.ToUint64(), ChanIdOut: event.OutgoingChanID.ToUint64(), AmtIn: uint64(amtInMsat.ToSatoshis()), AmtOut: uint64(amtOutMsat.ToSatoshis()), Fee: uint64(feeMsat.ToSatoshis()), FeeMsat: uint64(feeMsat), AmtInMsat: uint64(amtInMsat), AmtOutMsat: uint64(amtOutMsat), } } return resp, nil } // ExportChannelBackup attempts to return an encrypted static channel backup // for the target channel identified by it channel point. The backup is // encrypted with a key generated from the aezeed seed of the user. The // returned backup can either be restored using the RestoreChannelBackup method // once lnd is running, or via the InitWallet and UnlockWallet methods from the // WalletUnlocker service. func (r *rpcServer) ExportChannelBackup(ctx context.Context, in *lnrpc.ExportChannelBackupRequest) (*lnrpc.ChannelBackup, error) { // First, we'll convert the lnrpc channel point into a wire.OutPoint // that we can manipulate. txid, err := GetChanPointFundingTxid(in.ChanPoint) if err != nil { return nil, err } chanPoint := wire.OutPoint{ Hash: *txid, Index: in.ChanPoint.OutputIndex, } // Next, we'll attempt to fetch a channel backup for this channel from // the database. If this channel has been closed, or the outpoint is // unknown, then we'll return an error unpackedBackup, err := chanbackup.FetchBackupForChan( chanPoint, r.server.chanDB, ) if err != nil { return nil, err } // At this point, we have an unpacked backup (plaintext) so we'll now // attempt to serialize and encrypt it in order to create a packed // backup. packedBackups, err := chanbackup.PackStaticChanBackups( []chanbackup.Single{*unpackedBackup}, r.server.cc.keyRing, ) if err != nil { return nil, fmt.Errorf("packing of back ups failed: %v", err) } // Before we proceed, we'll ensure that we received a backup for this // channel, otherwise, we'll bail out. packedBackup, ok := packedBackups[chanPoint] if !ok { return nil, fmt.Errorf("expected single backup for "+ "ChannelPoint(%v), got %v", chanPoint, len(packedBackup)) } return &lnrpc.ChannelBackup{ ChanPoint: in.ChanPoint, ChanBackup: packedBackup, }, nil } // VerifyChanBackup allows a caller to verify the integrity of a channel backup // snapshot. This method will accept both either a packed Single or a packed // Multi. Specifying both will result in an error. func (r *rpcServer) VerifyChanBackup(ctx context.Context, in *lnrpc.ChanBackupSnapshot) (*lnrpc.VerifyChanBackupResponse, error) { switch { // If neither a Single or Multi has been specified, then we have nothing // to verify. case in.GetSingleChanBackups() == nil && in.GetMultiChanBackup() == nil: return nil, errors.New("either a Single or Multi channel " + "backup must be specified") // Either a Single or a Multi must be specified, but not both. case in.GetSingleChanBackups() != nil && in.GetMultiChanBackup() != nil: return nil, errors.New("either a Single or Multi channel " + "backup must be specified, but not both") // If a Single is specified then we'll only accept one of them to allow // the caller to map the valid/invalid state for each individual Single. case in.GetSingleChanBackups() != nil: chanBackupsProtos := in.GetSingleChanBackups().ChanBackups if len(chanBackupsProtos) != 1 { return nil, errors.New("only one Single is accepted " + "at a time") } // First, we'll convert the raw byte slice into a type we can // work with a bit better. chanBackup := chanbackup.PackedSingles( [][]byte{chanBackupsProtos[0].ChanBackup}, ) // With our PackedSingles created, we'll attempt to unpack the // backup. If this fails, then we know the backup is invalid for // some reason. _, err := chanBackup.Unpack(r.server.cc.keyRing) if err != nil { return nil, fmt.Errorf("invalid single channel "+ "backup: %v", err) } case in.GetMultiChanBackup() != nil: // We'll convert the raw byte slice into a PackedMulti that we // can easily work with. packedMultiBackup := in.GetMultiChanBackup().MultiChanBackup packedMulti := chanbackup.PackedMulti(packedMultiBackup) // We'll now attempt to unpack the Multi. If this fails, then we // know it's invalid. _, err := packedMulti.Unpack(r.server.cc.keyRing) if err != nil { return nil, fmt.Errorf("invalid multi channel backup: "+ "%v", err) } } return &lnrpc.VerifyChanBackupResponse{}, nil } // createBackupSnapshot converts the passed Single backup into a snapshot which // contains individual packed single backups, as well as a single packed multi // backup. func (r *rpcServer) createBackupSnapshot(backups []chanbackup.Single) ( *lnrpc.ChanBackupSnapshot, error) { // Once we have the set of back ups, we'll attempt to pack them all // into a series of single channel backups. singleChanPackedBackups, err := chanbackup.PackStaticChanBackups( backups, r.server.cc.keyRing, ) if err != nil { return nil, fmt.Errorf("unable to pack set of chan "+ "backups: %v", err) } // Now that we have our set of single packed backups, we'll morph that // into a form that the proto response requires. numBackups := len(singleChanPackedBackups) singleBackupResp := &lnrpc.ChannelBackups{ ChanBackups: make([]*lnrpc.ChannelBackup, 0, numBackups), } for chanPoint, singlePackedBackup := range singleChanPackedBackups { txid := chanPoint.Hash rpcChanPoint := &lnrpc.ChannelPoint{ FundingTxid: &lnrpc.ChannelPoint_FundingTxidBytes{ FundingTxidBytes: txid[:], }, OutputIndex: chanPoint.Index, } singleBackupResp.ChanBackups = append( singleBackupResp.ChanBackups, &lnrpc.ChannelBackup{ ChanPoint: rpcChanPoint, ChanBackup: singlePackedBackup, }, ) } // In addition, to the set of single chan backups, we'll also create a // single multi-channel backup which can be serialized into a single // file for safe storage. var b bytes.Buffer unpackedMultiBackup := chanbackup.Multi{ StaticBackups: backups, } err = unpackedMultiBackup.PackToWriter(&b, r.server.cc.keyRing) if err != nil { return nil, fmt.Errorf("unable to multi-pack backups: %v", err) } multiBackupResp := &lnrpc.MultiChanBackup{ MultiChanBackup: b.Bytes(), } for _, singleBackup := range singleBackupResp.ChanBackups { multiBackupResp.ChanPoints = append( multiBackupResp.ChanPoints, singleBackup.ChanPoint, ) } return &lnrpc.ChanBackupSnapshot{ SingleChanBackups: singleBackupResp, MultiChanBackup: multiBackupResp, }, nil } // ExportAllChannelBackups returns static channel backups for all existing // channels known to lnd. A set of regular singular static channel backups for // each channel are returned. Additionally, a multi-channel backup is returned // as well, which contains a single encrypted blob containing the backups of // each channel. func (r *rpcServer) ExportAllChannelBackups(ctx context.Context, in *lnrpc.ChanBackupExportRequest) (*lnrpc.ChanBackupSnapshot, error) { // First, we'll attempt to read back ups for ALL currently opened // channels from disk. allUnpackedBackups, err := chanbackup.FetchStaticChanBackups( r.server.chanDB, ) if err != nil { return nil, fmt.Errorf("unable to fetch all static chan "+ "backups: %v", err) } // With the backups assembled, we'll create a full snapshot. return r.createBackupSnapshot(allUnpackedBackups) } // RestoreChannelBackups accepts a set of singular channel backups, or a single // encrypted multi-chan backup and attempts to recover any funds remaining // within the channel. If we're able to unpack the backup, then the new channel // will be shown under listchannels, as well as pending channels. func (r *rpcServer) RestoreChannelBackups(ctx context.Context, in *lnrpc.RestoreChanBackupRequest) (*lnrpc.RestoreBackupResponse, error) { // First, we'll make our implementation of the // chanbackup.ChannelRestorer interface which we'll use to properly // restore either a set of chanbackup.Single or chanbackup.Multi // backups. chanRestorer := &chanDBRestorer{ db: r.server.chanDB, secretKeys: r.server.cc.keyRing, chainArb: r.server.chainArb, } // We'll accept either a list of Single backups, or a single Multi // backup which contains several single backups. switch { case in.GetChanBackups() != nil: chanBackupsProtos := in.GetChanBackups() // Now that we know what type of backup we're working with, // we'll parse them all out into a more suitable format. packedBackups := make([][]byte, 0, len(chanBackupsProtos.ChanBackups)) for _, chanBackup := range chanBackupsProtos.ChanBackups { packedBackups = append( packedBackups, chanBackup.ChanBackup, ) } // With our backups obtained, we'll now restore them which will // write the new backups to disk, and then attempt to connect // out to any peers that we know of which were our prior // channel peers. err := chanbackup.UnpackAndRecoverSingles( chanbackup.PackedSingles(packedBackups), r.server.cc.keyRing, chanRestorer, r.server, ) if err != nil { return nil, fmt.Errorf("unable to unpack single "+ "backups: %v", err) } case in.GetMultiChanBackup() != nil: packedMultiBackup := in.GetMultiChanBackup() // With our backups obtained, we'll now restore them which will // write the new backups to disk, and then attempt to connect // out to any peers that we know of which were our prior // channel peers. packedMulti := chanbackup.PackedMulti(packedMultiBackup) err := chanbackup.UnpackAndRecoverMulti( packedMulti, r.server.cc.keyRing, chanRestorer, r.server, ) if err != nil { return nil, fmt.Errorf("unable to unpack chan "+ "backup: %v", err) } } return &lnrpc.RestoreBackupResponse{}, nil } // SubscribeChannelBackups allows a client to sub-subscribe to the most up to // date information concerning the state of all channel back ups. Each time a // new channel is added, we return the new set of channels, along with a // multi-chan backup containing the backup info for all channels. Each time a // channel is closed, we send a new update, which contains new new chan back // ups, but the updated set of encrypted multi-chan backups with the closed // channel(s) removed. func (r *rpcServer) SubscribeChannelBackups(req *lnrpc.ChannelBackupSubscription, updateStream lnrpc.Lightning_SubscribeChannelBackupsServer) error { // First, we'll subscribe to the primary channel notifier so we can // obtain events for new pending/opened/closed channels. chanSubscription, err := r.server.channelNotifier.SubscribeChannelEvents() if err != nil { return err } defer chanSubscription.Cancel() for { select { // A new event has been sent by the channel notifier, we'll // assemble, then sling out a new event to the client. case e := <-chanSubscription.Updates(): // TODO(roasbeef): batch dispatch ntnfs switch e.(type) { // We only care about new/closed channels, so we'll // skip any events for active/inactive channels. // To make the subscription behave the same way as the // synchronous call and the file based backup, we also // include pending channels in the update. case channelnotifier.ActiveChannelEvent: continue case channelnotifier.InactiveChannelEvent: continue case channelnotifier.ActiveLinkEvent: continue } // Now that we know the channel state has changed, // we'll obtains the current set of single channel // backups from disk. chanBackups, err := chanbackup.FetchStaticChanBackups( r.server.chanDB, ) if err != nil { return fmt.Errorf("unable to fetch all "+ "static chan backups: %v", err) } // With our backups obtained, we'll pack them into a // snapshot and send them back to the client. backupSnapshot, err := r.createBackupSnapshot( chanBackups, ) if err != nil { return err } err = updateStream.Send(backupSnapshot) if err != nil { return err } case <-r.quit: return nil } } } // chanAcceptInfo is used in the ChannelAcceptor bidirectional stream and // encapsulates the request information sent from the RPCAcceptor to the // RPCServer. type chanAcceptInfo struct { chanReq *chanacceptor.ChannelAcceptRequest responseChan chan bool } // ChannelAcceptor dispatches a bi-directional streaming RPC in which // OpenChannel requests are sent to the client and the client responds with // a boolean that tells LND whether or not to accept the channel. This allows // node operators to specify their own criteria for accepting inbound channels // through a single persistent connection. func (r *rpcServer) ChannelAcceptor(stream lnrpc.Lightning_ChannelAcceptorServer) error { chainedAcceptor := r.chanPredicate // Create two channels to handle requests and responses respectively. newRequests := make(chan *chanAcceptInfo) responses := make(chan lnrpc.ChannelAcceptResponse) // Define a quit channel that will be used to signal to the RPCAcceptor's // closure whether the stream still exists. quit := make(chan struct{}) defer close(quit) // demultiplexReq is a closure that will be passed to the RPCAcceptor and // acts as an intermediary between the RPCAcceptor and the RPCServer. demultiplexReq := func(req *chanacceptor.ChannelAcceptRequest) bool { respChan := make(chan bool, 1) newRequest := &chanAcceptInfo{ chanReq: req, responseChan: respChan, } // timeout is the time after which ChannelAcceptRequests expire. timeout := time.After(defaultAcceptorTimeout) // Send the request to the newRequests channel. select { case newRequests <- newRequest: case <-timeout: rpcsLog.Errorf("RPCAcceptor returned false - reached timeout of %d", defaultAcceptorTimeout) return false case <-quit: return false case <-r.quit: return false } // Receive the response and return it. If no response has been received // in defaultAcceptorTimeout, then return false. select { case resp := <-respChan: return resp case <-timeout: rpcsLog.Errorf("RPCAcceptor returned false - reached timeout of %d", defaultAcceptorTimeout) return false case <-quit: return false case <-r.quit: return false } } // Create a new RPCAcceptor via the NewRPCAcceptor method. rpcAcceptor := chanacceptor.NewRPCAcceptor(demultiplexReq) // Add the RPCAcceptor to the ChainedAcceptor and defer its removal. id := chainedAcceptor.AddAcceptor(rpcAcceptor) defer chainedAcceptor.RemoveAcceptor(id) // errChan is used by the receive loop to signal any errors that occur // during reading from the stream. This is primarily used to shutdown the // send loop in the case of an RPC client disconnecting. errChan := make(chan error, 1) // We need to have the stream.Recv() in a goroutine since the call is // blocking and would prevent us from sending more ChannelAcceptRequests to // the RPC client. go func() { for { resp, err := stream.Recv() if err != nil { errChan <- err return } var pendingID [32]byte copy(pendingID[:], resp.PendingChanId) openChanResp := lnrpc.ChannelAcceptResponse{ Accept: resp.Accept, PendingChanId: pendingID[:], } // Now that we have the response from the RPC client, send it to // the responses chan. select { case responses <- openChanResp: case <-quit: return case <-r.quit: return } } }() acceptRequests := make(map[[32]byte]chan bool) for { select { case newRequest := <-newRequests: req := newRequest.chanReq pendingChanID := req.OpenChanMsg.PendingChannelID acceptRequests[pendingChanID] = newRequest.responseChan // A ChannelAcceptRequest has been received, send it to the client. chanAcceptReq := &lnrpc.ChannelAcceptRequest{ NodePubkey: req.Node.SerializeCompressed(), ChainHash: req.OpenChanMsg.ChainHash[:], PendingChanId: req.OpenChanMsg.PendingChannelID[:], FundingAmt: uint64(req.OpenChanMsg.FundingAmount), PushAmt: uint64(req.OpenChanMsg.PushAmount), DustLimit: uint64(req.OpenChanMsg.DustLimit), MaxValueInFlight: uint64(req.OpenChanMsg.MaxValueInFlight), ChannelReserve: uint64(req.OpenChanMsg.ChannelReserve), MinHtlc: uint64(req.OpenChanMsg.HtlcMinimum), FeePerKw: uint64(req.OpenChanMsg.FeePerKiloWeight), CsvDelay: uint32(req.OpenChanMsg.CsvDelay), MaxAcceptedHtlcs: uint32(req.OpenChanMsg.MaxAcceptedHTLCs), ChannelFlags: uint32(req.OpenChanMsg.ChannelFlags), } if err := stream.Send(chanAcceptReq); err != nil { return err } case resp := <-responses: // Look up the appropriate channel to send on given the pending ID. // If a channel is found, send the response over it. var pendingID [32]byte copy(pendingID[:], resp.PendingChanId) respChan, ok := acceptRequests[pendingID] if !ok { continue } // Send the response boolean over the buffered response channel. respChan <- resp.Accept // Delete the channel from the acceptRequests map. delete(acceptRequests, pendingID) case err := <-errChan: rpcsLog.Errorf("Received an error: %v, shutting down", err) return err case <-r.quit: return fmt.Errorf("RPC server is shutting down") } } } // BakeMacaroon allows the creation of a new macaroon with custom read and write // permissions. No first-party caveats are added since this can be done offline. func (r *rpcServer) BakeMacaroon(ctx context.Context, req *lnrpc.BakeMacaroonRequest) (*lnrpc.BakeMacaroonResponse, error) { rpcsLog.Debugf("[bakemacaroon]") // If the --no-macaroons flag is used to start lnd, the macaroon service // is not initialized. Therefore we can't bake new macaroons. if r.macService == nil { return nil, fmt.Errorf("macaroon authentication disabled, " + "remove --no-macaroons flag to enable") } helpMsg := fmt.Sprintf("supported actions are %v, supported entities "+ "are %v", validActions, validEntities) // Don't allow empty permission list as it doesn't make sense to have // a macaroon that is not allowed to access any RPC. if len(req.Permissions) == 0 { return nil, fmt.Errorf("permission list cannot be empty. "+ "specify at least one action/entity pair. %s", helpMsg) } // Validate and map permission struct used by gRPC to the one used by // the bakery. requestedPermissions := make([]bakery.Op, len(req.Permissions)) for idx, op := range req.Permissions { if !stringInSlice(op.Action, validActions) { return nil, fmt.Errorf("invalid permission action. %s", helpMsg) } if !stringInSlice(op.Entity, validEntities) { return nil, fmt.Errorf("invalid permission entity. %s", helpMsg) } requestedPermissions[idx] = bakery.Op{ Entity: op.Entity, Action: op.Action, } } // Bake new macaroon with the given permissions and send it binary // serialized and hex encoded to the client. newMac, err := r.macService.Oven.NewMacaroon( ctx, bakery.LatestVersion, nil, requestedPermissions..., ) if err != nil { return nil, err } newMacBytes, err := newMac.M().MarshalBinary() if err != nil { return nil, err } resp := &lnrpc.BakeMacaroonResponse{} resp.Macaroon = hex.EncodeToString(newMacBytes) return resp, nil } // FundingStateStep is an advanced funding related call that allows the caller // to either execute some preparatory steps for a funding workflow, or manually // progress a funding workflow. The primary way a funding flow is identified is // via its pending channel ID. As an example, this method can be used to // specify that we're expecting a funding flow for a particular pending channel // ID, for which we need to use specific parameters. Alternatively, this can // be used to interactively drive PSBT signing for funding for partially // complete funding transactions. func (r *rpcServer) FundingStateStep(ctx context.Context, in *lnrpc.FundingTransitionMsg) (*lnrpc.FundingStateStepResp, error) { var pendingChanID [32]byte switch { // If this is a message to register a new shim that is an external // channel point, then we'll contact the wallet to register this new // shim. A user will use this method to register a new channel funding // workflow which has already been partially negotiated outside of the // core protocol. case in.GetShimRegister() != nil && in.GetShimRegister().GetChanPointShim() != nil: rpcShimIntent := in.GetShimRegister().GetChanPointShim() // Using the rpc shim as a template, we'll construct a new // chanfunding.Assembler that is able to express proper // formulation of this expected channel. shimAssembler, err := newFundingShimAssembler( rpcShimIntent, false, r.server.cc.keyRing, ) if err != nil { return nil, err } req := &chanfunding.Request{ RemoteAmt: btcutil.Amount(rpcShimIntent.Amt), } shimIntent, err := shimAssembler.ProvisionChannel(req) if err != nil { return nil, err } // Once we have the intent, we'll register it with the wallet. // Once we receive an incoming funding request that uses this // pending channel ID, then this shim will be dispatched in // place of our regular funding workflow. copy(pendingChanID[:], rpcShimIntent.PendingChanId) err = r.server.cc.wallet.RegisterFundingIntent( pendingChanID, shimIntent, ) if err != nil { return nil, err } // There is no need to register a PSBT shim before opening the channel, // even though our RPC message structure allows for it. Inform the user // by returning a proper error instead of just doing nothing. case in.GetShimRegister() != nil && in.GetShimRegister().GetPsbtShim() != nil: return nil, fmt.Errorf("PSBT shim must only be sent when " + "opening a channel") // If this is a transition to cancel an existing shim, then we'll pass // this message along to the wallet, informing it that the intent no // longer needs to be considered and should be cleaned up. case in.GetShimCancel() != nil: rpcsLog.Debugf("Canceling funding shim for pending_id=%x", in.GetShimCancel().PendingChanId) copy(pendingChanID[:], in.GetShimCancel().PendingChanId) err := r.server.cc.wallet.CancelFundingIntent(pendingChanID) if err != nil { return nil, err } // If this is a transition to verify the PSBT for an existing shim, // we'll do so and then store the verified PSBT for later so we can // compare it to the final, signed one. case in.GetPsbtVerify() != nil: rpcsLog.Debugf("Verifying PSBT for pending_id=%x", in.GetPsbtVerify().PendingChanId) copy(pendingChanID[:], in.GetPsbtVerify().PendingChanId) packet, err := psbt.NewFromRawBytes( bytes.NewReader(in.GetPsbtVerify().FundedPsbt), false, ) if err != nil { return nil, fmt.Errorf("error parsing psbt: %v", err) } err = r.server.cc.wallet.PsbtFundingVerify( pendingChanID, packet, ) if err != nil { return nil, err } // If this is a transition to finalize the PSBT funding flow, we compare // the final PSBT to the previously verified one and if nothing // unexpected was changed, continue the channel opening process. case in.GetPsbtFinalize() != nil: rpcsLog.Debugf("Finalizing PSBT for pending_id=%x", in.GetPsbtFinalize().PendingChanId) copy(pendingChanID[:], in.GetPsbtFinalize().PendingChanId) packet, err := psbt.NewFromRawBytes( bytes.NewReader(in.GetPsbtFinalize().SignedPsbt), false, ) if err != nil { return nil, fmt.Errorf("error parsing psbt: %v", err) } err = r.server.cc.wallet.PsbtFundingFinalize( pendingChanID, packet, ) if err != nil { return nil, err } } // TODO(roasbeef): extend PendingChannels to also show shims // TODO(roasbeef): return resulting state? also add a method to query // current state? return &lnrpc.FundingStateStepResp{}, nil }