package sweep import ( "bytes" "fmt" "testing" "github.com/btcsuite/btcd/chaincfg" "github.com/btcsuite/btcd/txscript" "github.com/btcsuite/btcd/wire" "github.com/btcsuite/btcutil" "github.com/lightningnetwork/lnd/lntest/mock" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwallet/chainfee" ) // TestDetermineFeePerKw tests that given a fee preference, the // DetermineFeePerKw will properly map it to a concrete fee in sat/kw. func TestDetermineFeePerKw(t *testing.T) { t.Parallel() defaultFee := chainfee.SatPerKWeight(999) relayFee := chainfee.SatPerKWeight(300) feeEstimator := newMockFeeEstimator(defaultFee, relayFee) // We'll populate two items in the internal map which is used to query // a fee based on a confirmation target: the default conf target, and // an arbitrary conf target. We'll ensure below that both of these are // properly feeEstimator.blocksToFee[50] = 300 feeEstimator.blocksToFee[defaultNumBlocksEstimate] = 1000 testCases := []struct { // feePref is the target fee preference for this case. feePref FeePreference // fee is the value the DetermineFeePerKw should return given // the FeePreference above fee chainfee.SatPerKWeight // fail determines if this test case should fail or not. fail bool }{ // A fee rate below the fee rate floor should output the floor. { feePref: FeePreference{ FeeRate: chainfee.SatPerKWeight(99), }, fee: chainfee.FeePerKwFloor, }, // A fee rate above the floor, should pass through and return // the target fee rate. { feePref: FeePreference{ FeeRate: 900, }, fee: 900, }, // A specified confirmation target should cause the function to // query the estimator which will return our value specified // above. { feePref: FeePreference{ ConfTarget: 50, }, fee: 300, }, // If the caller doesn't specify any values at all, then we // should query for the default conf target. { feePref: FeePreference{}, fee: 1000, }, // Both conf target and fee rate are set, we should return with // an error. { feePref: FeePreference{ ConfTarget: 50, FeeRate: 90000, }, fee: 300, fail: true, }, } for i, testCase := range testCases { targetFee, err := DetermineFeePerKw( feeEstimator, testCase.feePref, ) switch { case testCase.fail && err != nil: continue case testCase.fail && err == nil: t.Fatalf("expected failure for #%v", i) case !testCase.fail && err != nil: t.Fatalf("unable to estimate fee; %v", err) } if targetFee != testCase.fee { t.Fatalf("#%v: wrong fee: expected %v got %v", i, testCase.fee, targetFee) } } } type mockUtxoSource struct { outputs []*lnwallet.Utxo } func newMockUtxoSource(utxos []*lnwallet.Utxo) *mockUtxoSource { return &mockUtxoSource{ outputs: utxos, } } func (m *mockUtxoSource) ListUnspentWitness(minConfs int32, maxConfs int32) ([]*lnwallet.Utxo, error) { return m.outputs, nil } type mockCoinSelectionLocker struct { fail bool } func (m *mockCoinSelectionLocker) WithCoinSelectLock(f func() error) error { if err := f(); err != nil { return err } if m.fail { return fmt.Errorf("kek") } return nil } type mockOutpointLocker struct { lockedOutpoints map[wire.OutPoint]struct{} unlockedOutpoints map[wire.OutPoint]struct{} } func newMockOutpointLocker() *mockOutpointLocker { return &mockOutpointLocker{ lockedOutpoints: make(map[wire.OutPoint]struct{}), unlockedOutpoints: make(map[wire.OutPoint]struct{}), } } func (m *mockOutpointLocker) LockOutpoint(o wire.OutPoint) { m.lockedOutpoints[o] = struct{}{} } func (m *mockOutpointLocker) UnlockOutpoint(o wire.OutPoint) { m.unlockedOutpoints[o] = struct{}{} } var sweepScript = []byte{ 0x0, 0x14, 0x64, 0x3d, 0x8b, 0x15, 0x69, 0x4a, 0x54, 0x7d, 0x57, 0x33, 0x6e, 0x51, 0xdf, 0xfd, 0x38, 0xe3, 0xe, 0x6e, 0xf8, 0xef, } var deliveryAddr = func() btcutil.Address { _, addrs, _, err := txscript.ExtractPkScriptAddrs( sweepScript, &chaincfg.TestNet3Params, ) if err != nil { panic(err) } return addrs[0] }() var testUtxos = []*lnwallet.Utxo{ { // A p2wkh output. AddressType: lnwallet.WitnessPubKey, PkScript: []byte{ 0x0, 0x14, 0x64, 0x3d, 0x8b, 0x15, 0x69, 0x4a, 0x54, 0x7d, 0x57, 0x33, 0x6e, 0x51, 0xdf, 0xfd, 0x38, 0xe3, 0xe, 0x6e, 0xf7, 0xef, }, Value: 1000, OutPoint: wire.OutPoint{ Index: 1, }, }, { // A np2wkh output. AddressType: lnwallet.NestedWitnessPubKey, PkScript: []byte{ 0xa9, 0x14, 0x97, 0x17, 0xf7, 0xd1, 0x5f, 0x6f, 0x8b, 0x7, 0xe3, 0x58, 0x43, 0x19, 0xb9, 0x7e, 0xa9, 0x20, 0x18, 0xc3, 0x17, 0xd7, 0x87, }, Value: 2000, OutPoint: wire.OutPoint{ Index: 2, }, }, // A p2wsh output. { AddressType: lnwallet.UnknownAddressType, PkScript: []byte{ 0x0, 0x20, 0x70, 0x1a, 0x8d, 0x40, 0x1c, 0x84, 0xfb, 0x13, 0xe6, 0xba, 0xf1, 0x69, 0xd5, 0x96, 0x84, 0xe2, 0x7a, 0xbd, 0x9f, 0xa2, 0x16, 0xc8, 0xbc, 0x5b, 0x9f, 0xc6, 0x3d, 0x62, 0x2f, 0xf8, 0xc5, 0x8c, }, Value: 3000, OutPoint: wire.OutPoint{ Index: 3, }, }, } func assertUtxosLocked(t *testing.T, utxoLocker *mockOutpointLocker, utxos []*lnwallet.Utxo) { t.Helper() for _, utxo := range utxos { if _, ok := utxoLocker.lockedOutpoints[utxo.OutPoint]; !ok { t.Fatalf("utxo %v was never locked", utxo.OutPoint) } } } func assertNoUtxosUnlocked(t *testing.T, utxoLocker *mockOutpointLocker, utxos []*lnwallet.Utxo) { t.Helper() if len(utxoLocker.unlockedOutpoints) != 0 { t.Fatalf("outputs have been locked, but shouldn't have been") } } func assertUtxosUnlocked(t *testing.T, utxoLocker *mockOutpointLocker, utxos []*lnwallet.Utxo) { t.Helper() for _, utxo := range utxos { if _, ok := utxoLocker.unlockedOutpoints[utxo.OutPoint]; !ok { t.Fatalf("utxo %v was never unlocked", utxo.OutPoint) } } } func assertUtxosLockedAndUnlocked(t *testing.T, utxoLocker *mockOutpointLocker, utxos []*lnwallet.Utxo) { t.Helper() for _, utxo := range utxos { if _, ok := utxoLocker.lockedOutpoints[utxo.OutPoint]; !ok { t.Fatalf("utxo %v was never locked", utxo.OutPoint) } if _, ok := utxoLocker.unlockedOutpoints[utxo.OutPoint]; !ok { t.Fatalf("utxo %v was never unlocked", utxo.OutPoint) } } } // TestCraftSweepAllTxCoinSelectFail tests that if coin selection fails, then // we unlock any outputs we may have locked in the passed closure. func TestCraftSweepAllTxCoinSelectFail(t *testing.T) { t.Parallel() utxoSource := newMockUtxoSource(testUtxos) coinSelectLocker := &mockCoinSelectionLocker{ fail: true, } utxoLocker := newMockOutpointLocker() _, err := CraftSweepAllTx( 0, 100, nil, coinSelectLocker, utxoSource, utxoLocker, nil, nil, ) // Since we instructed the coin select locker to fail above, we should // get an error. if err == nil { t.Fatalf("sweep tx should have failed: %v", err) } // At this point, we'll now verify that all outputs were initially // locked, and then also unlocked due to the failure. assertUtxosLockedAndUnlocked(t, utxoLocker, testUtxos) } // TestCraftSweepAllTxUnknownWitnessType tests that if one of the inputs we // encounter is of an unknown witness type, then we fail and unlock any prior // locked outputs. func TestCraftSweepAllTxUnknownWitnessType(t *testing.T) { t.Parallel() utxoSource := newMockUtxoSource(testUtxos) coinSelectLocker := &mockCoinSelectionLocker{} utxoLocker := newMockOutpointLocker() _, err := CraftSweepAllTx( 0, 100, nil, coinSelectLocker, utxoSource, utxoLocker, nil, nil, ) // Since passed in a p2wsh output, which is unknown, we should fail to // map the output to a witness type. if err == nil { t.Fatalf("sweep tx should have failed: %v", err) } // At this point, we'll now verify that all outputs were initially // locked, and then also unlocked since we weren't able to find a // witness type for the last output. assertUtxosLockedAndUnlocked(t, utxoLocker, testUtxos) } // TestCraftSweepAllTx tests that we'll properly lock all available outputs // within the wallet, and craft a single sweep transaction that pays to the // target output. func TestCraftSweepAllTx(t *testing.T) { t.Parallel() // First, we'll make a mock signer along with a fee estimator, We'll // use zero fees to we can assert a precise output value. signer := &mock.DummySigner{} feeEstimator := newMockFeeEstimator(0, 0) // For our UTXO source, we'll pass in all the UTXOs that we know of, // other than the final one which is of an unknown witness type. targetUTXOs := testUtxos[:2] utxoSource := newMockUtxoSource(targetUTXOs) coinSelectLocker := &mockCoinSelectionLocker{} utxoLocker := newMockOutpointLocker() sweepPkg, err := CraftSweepAllTx( 0, 100, deliveryAddr, coinSelectLocker, utxoSource, utxoLocker, feeEstimator, signer, ) if err != nil { t.Fatalf("unable to make sweep tx: %v", err) } // At this point, all of the UTXOs that we made above should be locked // and none of them unlocked. assertUtxosLocked(t, utxoLocker, testUtxos[:2]) assertNoUtxosUnlocked(t, utxoLocker, testUtxos[:2]) // Now that we have our sweep transaction, we should find that we have // a UTXO for each input, and also that our final output value is the // sum of all our inputs. sweepTx := sweepPkg.SweepTx if len(sweepTx.TxIn) != len(targetUTXOs) { t.Fatalf("expected %v utxo, got %v", len(targetUTXOs), len(sweepTx.TxIn)) } // We should have a single output that pays to our sweep script // generated above. expectedSweepValue := int64(3000) if len(sweepTx.TxOut) != 1 { t.Fatalf("should have %v outputs, instead have %v", 1, len(sweepTx.TxOut)) } output := sweepTx.TxOut[0] switch { case output.Value != expectedSweepValue: t.Fatalf("expected %v sweep value, instead got %v", expectedSweepValue, output.Value) case !bytes.Equal(sweepScript, output.PkScript): t.Fatalf("expected %x sweep script, instead got %x", sweepScript, output.PkScript) } // If we cancel the sweep attempt, then we should find that all the // UTXOs within the sweep transaction are now unlocked. sweepPkg.CancelSweepAttempt() assertUtxosUnlocked(t, utxoLocker, testUtxos[:2]) }