package main import ( "bytes" "container/list" "encoding/hex" "fmt" "net" "sync" "sync/atomic" "time" "github.com/BitfuryLightning/tools/rt/graph" "github.com/btcsuite/fastsha256" "github.com/davecgh/go-spew/spew" "github.com/lightningnetwork/lightning-onion" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lndc" "github.com/lightningnetwork/lnd/lnrpc" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/roasbeef/btcd/btcec" "github.com/roasbeef/btcd/txscript" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcutil" ) var ( numNodes int32 ) const ( // pingInterval is the interval at which ping messages are sent. pingInterval = 30 * time.Second // outgoingQueueLen is the buffer size of the channel which houses // messages to be sent across the wire, requested by objects outside // this struct. outgoingQueueLen = 50 ) // outgoinMsg packages an lnwire.Message to be sent out on the wire, along with // a buffered channel which will be sent upon once the write is complete. This // buffered channel acts as a semaphore to be used for synchronization purposes. type outgoinMsg struct { msg lnwire.Message sentChan chan struct{} // MUST be buffered. } // chanSnapshotReq is a message sent by outside sub-systems to a peer in order // to gain a snapshot of the peer's currently active channels. type chanSnapshotReq struct { resp chan []*channeldb.ChannelSnapshot } // peer is an active peer on the Lightning Network. This struct is responsible // for managing any channel state related to this peer. To do so, it has several // helper goroutines to handle events such as HTLC timeouts, new funding // workflow, and detecting an uncooperative closure of any active channels. // TODO(roasbeef): proper reconnection logic type peer struct { // MUST be used atomically. started int32 connected int32 disconnect int32 conn net.Conn identityPub *btcec.PublicKey lightningAddr *lndc.LNAdr lightningID wire.ShaHash inbound bool id int32 // For purposes of detecting retransmits, etc. lastNMessages map[lnwire.Message]struct{} // This mutex protects all the stats below it. sync.RWMutex timeConnected time.Time lastSend time.Time lastRecv time.Time // The following fields are only meant to be used *atomically* bytesReceived uint64 bytesSent uint64 satoshisSent uint64 satoshisReceived uint64 // chainNet is the Bitcoin network to which this peer is anchored to. chainNet wire.BitcoinNet // sendQueue is the channel which is used to queue outgoing to be // written onto the wire. Note that this channel is unbuffered. sendQueue chan outgoinMsg // outgoingQueue is a buffered channel which allows second/third party // objects to queue messages to be sent out on the wire. outgoingQueue chan outgoinMsg // sendQueueSync is used as a semaphore to synchronize writes between // the writeHandler and the queueHandler. sendQueueSync chan struct{} // activeChannels is a map which stores the state machines of all // active channels. Channels are indexed into the map by the txid of // the funding transaction which opened the channel. activeChannels map[wire.OutPoint]*lnwallet.LightningChannel chanSnapshotReqs chan *chanSnapshotReq htlcManagers map[wire.OutPoint]chan lnwire.Message // newChanBarriers is a map from a channel point to a 'barrier' which // will be signalled once the channel is fully open. This barrier acts // as a synchronization point for any incoming/outgoing HTLCs before // the channel has been fully opened. barrierMtx sync.RWMutex newChanBarriers map[wire.OutPoint]chan struct{} barrierInits chan wire.OutPoint // newChannels is used by the fundingManager to send fully opened // channels to the source peer which handled the funding workflow. newChannels chan *lnwallet.LightningChannel // localCloseChanReqs is a channel in which any local requests to // close a particular channel are sent over. localCloseChanReqs chan *closeLinkReq // remoteCloseChanReqs is a channel in which any remote requests // (initiated by the remote peer) close a particular channel are sent // over. remoteCloseChanReqs chan *lnwire.CloseRequest // nextPendingChannelID is an integer which represents the id of the // next pending channel. Pending channels are tracked by this id // throughout their lifetime until they become active channels, or are // cancelled. Channels id's initiated by an outbound node start from 0, // while channels inititaed by an inbound node start from 2^63. In // either case, this value is always monotonically increasing. nextPendingChannelID uint64 pendingChannelMtx sync.RWMutex server *server queueQuit chan struct{} quit chan struct{} wg sync.WaitGroup } // newPeer creates a new peer from an establish connection object, and a // pointer to the main server. func newPeer(conn net.Conn, server *server, btcNet wire.BitcoinNet, inbound bool) (*peer, error) { lndcConn := conn.(*lndc.LNDConn) nodePub := lndcConn.RemotePub p := &peer{ conn: conn, identityPub: nodePub, lightningID: wire.ShaHash(fastsha256.Sum256(nodePub.SerializeCompressed())), id: atomic.AddInt32(&numNodes, 1), chainNet: btcNet, inbound: inbound, server: server, lastNMessages: make(map[lnwire.Message]struct{}), sendQueueSync: make(chan struct{}, 1), sendQueue: make(chan outgoinMsg, 1), outgoingQueue: make(chan outgoinMsg, outgoingQueueLen), barrierInits: make(chan wire.OutPoint), newChanBarriers: make(map[wire.OutPoint]chan struct{}), activeChannels: make(map[wire.OutPoint]*lnwallet.LightningChannel), htlcManagers: make(map[wire.OutPoint]chan lnwire.Message), chanSnapshotReqs: make(chan *chanSnapshotReq), newChannels: make(chan *lnwallet.LightningChannel, 1), localCloseChanReqs: make(chan *closeLinkReq), remoteCloseChanReqs: make(chan *lnwire.CloseRequest), queueQuit: make(chan struct{}), quit: make(chan struct{}), } // TODO(roasbeef): re-write after lnaddr revamp, shouldn't need to use // type assertions var err error tcpAddr := lndcConn.Conn.(*net.TCPConn).RemoteAddr().(*net.TCPAddr) p.lightningAddr, err = lndc.NewLnAdr(tcpAddr, nodePub, activeNetParams.Params) if err != nil { return nil, err } // Initiate the pending channel identifier properly depending on if this // node is inbound or outbound. This value will be used in an increasing // manner to track pending channels. if inbound { p.nextPendingChannelID = 1 << 63 } else { p.nextPendingChannelID = 0 } // Fetch and then load all the active channels we have with this // remote peer from the database. activeChans, err := server.chanDB.FetchOpenChannels(p.identityPub) if err != nil { peerLog.Errorf("unable to fetch active chans "+ "for peer %v: %v", p, err) return nil, err } peerLog.Debugf("Loaded %v active channels from database with peerID(%v)", len(activeChans), p.id) if err := p.loadActiveChannels(activeChans); err != nil { return nil, err } return p, nil } // loadActiveChannels creates indexes within the peer for tracking all active // channels returned by the database. func (p *peer) loadActiveChannels(chans []*channeldb.OpenChannel) error { for _, dbChan := range chans { chanID := dbChan.ChanID lnChan, err := lnwallet.NewLightningChannel(p.server.lnwallet.Signer, p.server.bio, p.server.chainNotifier, dbChan) if err != nil { return err } chanPoint := wire.OutPoint{ Hash: chanID.Hash, Index: chanID.Index, } p.activeChannels[chanPoint] = lnChan peerLog.Infof("peerID(%v) loaded ChannelPoint(%v)", p.id, chanPoint) // Register this new channel link with the HTLC Switch. This is // necessary to properly route multi-hop payments, and forward // new payments triggered by RPC clients. downstreamLink := make(chan *htlcPacket, 10) plexChan := p.server.htlcSwitch.RegisterLink(p, dbChan.Snapshot(), downstreamLink) upstreamLink := make(chan lnwire.Message, 10) p.htlcManagers[chanPoint] = upstreamLink p.wg.Add(1) go p.htlcManager(lnChan, plexChan, downstreamLink, upstreamLink) } return nil } // Start starts all helper goroutines the peer needs for normal operations. // In the case this peer has already beeen started, then this function is a // noop. func (p *peer) Start() error { if atomic.AddInt32(&p.started, 1) != 1 { return nil } peerLog.Tracef("peer %v starting", p) p.wg.Add(4) go p.readHandler() go p.queueHandler() go p.writeHandler() go p.channelManager() return nil } // Stop signals the peer for a graceful shutdown. All active goroutines will be // signaled to wrap up any final actions. This function will also block until // all goroutines have exited. func (p *peer) Stop() error { // If we're already disconnecting, just exit. if atomic.AddInt32(&p.disconnect, 1) != 1 { return nil } // Otherwise, close the connection if we're currently connected. if atomic.LoadInt32(&p.connected) != 0 { p.conn.Close() } // Signal all worker goroutines to gracefully exit. close(p.quit) p.wg.Wait() return nil } // Disconnect terminates the connection with the remote peer. Additionally, a // signal is sent to the server and htlcSwitch indicating the resources // allocated to the peer can now be cleaned up. func (p *peer) Disconnect() { if !atomic.CompareAndSwapInt32(&p.disconnect, 0, 1) { return } peerLog.Tracef("Disconnecting %s", p) if atomic.LoadInt32(&p.connected) != 0 { p.conn.Close() } close(p.quit) // Launch a goroutine to clean up the remaining resources. go func() { // Tell the switch to unregister all links associated with this // peer. Passing nil as the target link indicates that all links // associated with this interface should be closed. p.server.htlcSwitch.UnregisterLink(p.identityPub, nil) p.server.donePeers <- p }() } // String returns the string representation of this peer. func (p *peer) String() string { return p.conn.RemoteAddr().String() } // readNextMessage reads, and returns the next message on the wire along with // any additional raw payload. func (p *peer) readNextMessage() (lnwire.Message, []byte, error) { // TODO(roasbeef): use our own net magic? n, nextMsg, rawPayload, err := lnwire.ReadMessage(p.conn, 0, p.chainNet) atomic.AddUint64(&p.bytesReceived, uint64(n)) if err != nil { return nil, nil, err } // TODO(roasbeef): add message summaries peerLog.Tracef("readMessage from %v: %v", p, newLogClosure(func() string { return spew.Sdump(nextMsg) })) return nextMsg, rawPayload, nil } // readHandler is responsible for reading messages off the wire in series, then // properly dispatching the handling of the message to the proper sub-system. // // NOTE: This method MUST be run as a goroutine. func (p *peer) readHandler() { out: for atomic.LoadInt32(&p.disconnect) == 0 { nextMsg, _, err := p.readNextMessage() if err != nil { peerLog.Infof("unable to read message: %v", err) break out } var isChanUpdate bool var targetChan *wire.OutPoint switch msg := nextMsg.(type) { // TODO(roasbeef): consolidate into predicate (single vs dual) case *lnwire.SingleFundingRequest: p.server.fundingMgr.processFundingRequest(msg, p) case *lnwire.SingleFundingResponse: p.server.fundingMgr.processFundingResponse(msg, p) case *lnwire.SingleFundingComplete: p.server.fundingMgr.processFundingComplete(msg, p) case *lnwire.SingleFundingSignComplete: p.server.fundingMgr.processFundingSignComplete(msg, p) case *lnwire.SingleFundingOpenProof: p.server.fundingMgr.processFundingOpenProof(msg, p) case *lnwire.CloseRequest: p.remoteCloseChanReqs <- msg // TODO(roasbeef): interface for htlc update msgs // * .(CommitmentUpdater) case *lnwire.ErrorGeneric: switch msg.Code { case lnwire.ErrorMaxPendingChannels: p.server.fundingMgr.processErrorGeneric(msg, p) default: peerLog.Warnf("ErrorGeneric(%v) handling isn't"+ " implemented.", msg.Code) } case *lnwire.HTLCAddRequest: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.HTLCSettleRequest: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.CommitRevocation: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.CommitSignature: isChanUpdate = true targetChan = msg.ChannelPoint case *lnwire.NeighborAckMessage, *lnwire.NeighborHelloMessage, *lnwire.NeighborRstMessage, *lnwire.NeighborUpdMessage, *lnwire.RoutingTableRequestMessage, *lnwire.RoutingTableTransferMessage: // Convert to base routing message and set sender and receiver vertex := hex.EncodeToString(p.identityPub.SerializeCompressed()) p.server.routingMgr.ReceiveRoutingMessage(msg, graph.NewID(vertex)) } if isChanUpdate { // We might be receiving an update to a newly funded // channel in which we were the responder. Therefore // we need to possibly block until the new channel has // propagated internally through the system. p.barrierMtx.RLock() barrier, ok := p.newChanBarriers[*targetChan] p.barrierMtx.RUnlock() if ok { peerLog.Tracef("waiting for chan barrier "+ "signal for ChannelPoint(%v)", targetChan) select { case <-barrier: case <-p.quit: // TODO(roasbeef): add timer? break out } peerLog.Tracef("barrier for ChannelPoint(%v) "+ "closed", targetChan) } // Dispatch the commitment update message to the proper // active goroutine dedicated to this channel. targetChan, ok := p.htlcManagers[*targetChan] if !ok { peerLog.Errorf("recv'd update for unknown channel %v", targetChan) continue } targetChan <- nextMsg } } p.Disconnect() p.wg.Done() peerLog.Tracef("readHandler for peer %v done", p) } // writeMessage writes the target lnwire.Message to the remote peer. func (p *peer) writeMessage(msg lnwire.Message) error { // Simply exit if we're shutting down. if atomic.LoadInt32(&p.disconnect) != 0 { return nil } // TODO(roasbeef): add message summaries peerLog.Tracef("writeMessage to %v: %v", p, newLogClosure(func() string { return spew.Sdump(msg) })) n, err := lnwire.WriteMessage(p.conn, msg, 0, p.chainNet) atomic.AddUint64(&p.bytesSent, uint64(n)) return err } // writeHandler is a goroutine dedicated to reading messages off of an incoming // queue, and writing them out to the wire. This goroutine coordinates with the // queueHandler in order to ensure the incoming message queue is quickly drained. // // NOTE: This method MUST be run as a goroutine. func (p *peer) writeHandler() { // pingTicker is used to periodically send pings to the remote peer. pingTicker := time.NewTicker(pingInterval) defer pingTicker.Stop() out: for { select { case outMsg := <-p.sendQueue: switch m := outMsg.msg.(type) { // TODO(roasbeef): handle special write cases } if err := p.writeMessage(outMsg.msg); err != nil { peerLog.Errorf("unable to write message: %v", err) p.Disconnect() break out } // Synchronize with the writeHandler. p.sendQueueSync <- struct{}{} case <-pingTicker.C: // TODO(roasbeef): move ping to time.AfterFunc case <-p.quit: break out } } // Wait for the queueHandler to finish so we can empty out all pending // messages avoiding a possible deadlock somewhere. <-p.queueQuit // Drain any lingering messages that we're meant to be sent. But since // we're shutting down, just ignore them. fin: for { select { case msg := <-p.sendQueue: if msg.sentChan != nil { msg.sentChan <- struct{}{} } default: break fin } } p.wg.Done() peerLog.Tracef("writeHandler for peer %v done", p) } // queueHandler is responsible for accepting messages from outside sub-systems // to be eventually sent out on the wire by the writeHandler. // // NOTE: This method MUST be run as a goroutine. func (p *peer) queueHandler() { waitOnSync := false pendingMsgs := list.New() out: for { select { case msg := <-p.outgoingQueue: if !waitOnSync { p.sendQueue <- msg } else { pendingMsgs.PushBack(msg) } waitOnSync = true case <-p.sendQueueSync: // If there aren't any more remaining messages in the // queue, then we're no longer waiting to synchronize // with the writeHandler. next := pendingMsgs.Front() if next == nil { waitOnSync = false continue } // Notify the writeHandler about the next item to // asynchronously send. val := pendingMsgs.Remove(next) p.sendQueue <- val.(outgoinMsg) // TODO(roasbeef): other sync stuffs case <-p.quit: break out } } close(p.queueQuit) p.wg.Done() } // queueMsg queues a new lnwire.Message to be eventually sent out on the // wire. func (p *peer) queueMsg(msg lnwire.Message, doneChan chan struct{}) { p.outgoingQueue <- outgoinMsg{msg, doneChan} } // ChannelSnapshots returns a slice of channel snapshots detaling all currently // active channels maintained with the remote peer. func (p *peer) ChannelSnapshots() []*channeldb.ChannelSnapshot { resp := make(chan []*channeldb.ChannelSnapshot, 1) p.chanSnapshotReqs <- &chanSnapshotReq{resp} return <-resp } // channelManager is goroutine dedicated to handling all requests/signals // pertaining to the opening, cooperative closing, and force closing of all // channels maintained with the remote peer. // // NOTE: This method MUST be run as a goroutine. func (p *peer) channelManager() { out: for { select { case req := <-p.chanSnapshotReqs: snapshots := make([]*channeldb.ChannelSnapshot, 0, len(p.activeChannels)) for _, activeChan := range p.activeChannels { snapshot := activeChan.StateSnapshot() snapshots = append(snapshots, snapshot) } req.resp <- snapshots case pendingChanPoint := <-p.barrierInits: // A new channel has almost finished the funding // process. In order to properly synchronize with the // writeHandler goroutine, we add a new channel to the // barriers map which will be closed once the channel // is fully open. p.barrierMtx.Lock() peerLog.Tracef("Creating chan barrier for "+ "ChannelPoint(%v)", pendingChanPoint) p.newChanBarriers[pendingChanPoint] = make(chan struct{}) p.barrierMtx.Unlock() case newChan := <-p.newChannels: chanPoint := *newChan.ChannelPoint() p.activeChannels[chanPoint] = newChan peerLog.Infof("New channel active ChannelPoint(%v) "+ "with peerId(%v)", chanPoint, p.id) // Now that the channel is open, notify the Htlc // Switch of a new active link. chanSnapShot := newChan.StateSnapshot() downstreamLink := make(chan *htlcPacket, 10) plexChan := p.server.htlcSwitch.RegisterLink(p, chanSnapShot, downstreamLink) // With the channel registered to the HtlcSwitch spawn // a goroutine to handle commitment updates for this // new channel. upstreamLink := make(chan lnwire.Message, 10) p.htlcManagers[chanPoint] = upstreamLink p.wg.Add(1) go p.htlcManager(newChan, plexChan, downstreamLink, upstreamLink) // Close the active channel barrier signalling the // readHandler that commitment related modifications to // this channel can now proceed. p.barrierMtx.Lock() peerLog.Tracef("Closing chan barrier for ChannelPoint(%v)", chanPoint) close(p.newChanBarriers[chanPoint]) delete(p.newChanBarriers, chanPoint) p.barrierMtx.Unlock() case req := <-p.localCloseChanReqs: p.handleLocalClose(req) case req := <-p.remoteCloseChanReqs: p.handleRemoteClose(req) case <-p.quit: break out } } p.wg.Done() } // executeForceClose executes a unilateral close of the target channel by // broadcasting the current commitment state directly on-chain. Once the // commitment transaction has been broadcast, a struct describing the final // state of the channel is sent to the utxoNursery in order to ultimatley sweep // the immature outputs. func (p *peer) executeForceClose(channel *lnwallet.LightningChannel) (*wire.ShaHash, error) { // Execute a unilateral close shutting down all further channel // operation. closeSummary, err := channel.ForceClose() if err != nil { return nil, err } closeTx := closeSummary.CloseTx txid := closeTx.TxSha() // With the close transaction in hand, broadcast the transaction to the // network, thereby entering the psot channel resolution state. peerLog.Infof("Broadcasting force close transaction: %v", channel.ChannelPoint(), newLogClosure(func() string { return spew.Sdump(closeTx) })) if err := p.server.lnwallet.PublishTransaction(closeTx); err != nil { return nil, err } // Send the closed channel summary over to the utxoNursery in order to // have its outputs swept back into the wallet once they're mature. p.server.utxoNursery.incubateOutputs(closeSummary) return &txid, nil } // executeCooperativeClose executes the initial phase of a user-executed // cooperative channel close. The channel state machine is transitioned to the // closing phase, then our half of the closing witness is sent over to the // remote peer. func (p *peer) executeCooperativeClose(channel *lnwallet.LightningChannel) (*wire.ShaHash, error) { // Shift the channel state machine into a 'closing' state. This // generates a signature for the closing tx, as well as a txid of the // closing tx itself, allowing us to watch the network to determine // when the remote node broadcasts the fully signed closing // transaction. sig, txid, err := channel.InitCooperativeClose() if err != nil { return nil, err } chanPoint := channel.ChannelPoint() peerLog.Infof("Executing cooperative closure of "+ "ChanPoint(%v) with peerID(%v), txid=%v", chanPoint, p.id, txid) // With our signature for the close tx generated, send the signature to // the remote peer instructing it to close this particular channel // point. // TODO(roasbeef): remove encoding redundancy closeSig, err := btcec.ParseSignature(sig, btcec.S256()) if err != nil { return nil, err } closeReq := lnwire.NewCloseRequest(chanPoint, closeSig) p.queueMsg(closeReq, nil) return txid, nil } // handleLocalClose kicks-off the workflow to execute a cooperative or forced // unilateral closure of the channel initiated by a local sub-system. func (p *peer) handleLocalClose(req *closeLinkReq) { var ( err error closingTxid *wire.ShaHash ) channel := p.activeChannels[*req.chanPoint] if req.forceClose { closingTxid, err = p.executeForceClose(channel) peerLog.Infof("Force closing ChannelPoint(%v) with txid: %v", req.chanPoint, closingTxid) } else { closingTxid, err = p.executeCooperativeClose(channel) peerLog.Infof("Attempting cooperative close of "+ "ChannelPoint(%v) with txid: %v", req.chanPoint, closingTxid) } if err != nil { req.err <- err return } // Update the caller w.r.t the current pending state of this request. req.updates <- &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ClosePending{ ClosePending: &lnrpc.PendingUpdate{ Txid: closingTxid[:], }, }, } // Finally, launch a goroutine which will request to be notified by the // ChainNotifier once the closure transaction obtains a single // confirmation. go func() { // TODO(roasbeef): add param for num needed confs notifier := p.server.chainNotifier confNtfn, err := notifier.RegisterConfirmationsNtfn(closingTxid, 1) if err != nil { req.err <- err return } select { case height, ok := <-confNtfn.Confirmed: // In the case that the ChainNotifier is shutting // down, all subscriber notification channels will be // closed, generating a nil receive. if !ok { // TODO(roasbeef): check for nil elsewhere return } // The channel has been closed, remove it from any // active indexes, and the database state. peerLog.Infof("ChannelPoint(%v) is now "+ "closed at height %v", req.chanPoint, height) if err := wipeChannel(p, channel); err != nil { req.err <- err return } case <-p.quit: return } // Respond to the local sub-system which requested the channel // closure. req.updates <- &lnrpc.CloseStatusUpdate{ Update: &lnrpc.CloseStatusUpdate_ChanClose{ ChanClose: &lnrpc.ChannelCloseUpdate{ ClosingTxid: closingTxid[:], Success: true, }, }, } }() } // handleRemoteClose completes a request for cooperative channel closure // initiated by the remote node. func (p *peer) handleRemoteClose(req *lnwire.CloseRequest) { chanPoint := req.ChannelPoint key := wire.OutPoint{ Hash: chanPoint.Hash, Index: chanPoint.Index, } channel := p.activeChannels[key] // Now that we have their signature for the closure transaction, we // can assemble the final closure transaction, complete with our // signature. sig := req.RequesterCloseSig closeSig := append(sig.Serialize(), byte(txscript.SigHashAll)) closeTx, err := channel.CompleteCooperativeClose(closeSig) if err != nil { peerLog.Errorf("unable to complete cooperative "+ "close for ChannelPoint(%v): %v", chanPoint, err) // TODO(roasbeef): send ErrorGeneric to other side return } // Finally, broadcast the closure transaction, to the network. peerLog.Infof("Broadcasting cooperative close tx: %v", newLogClosure(func() string { return spew.Sdump(closeTx) })) if err := p.server.lnwallet.PublishTransaction(closeTx); err != nil { peerLog.Errorf("channel close tx from "+ "ChannelPoint(%v) rejected: %v", chanPoint, err) // TODO(roasbeef): send ErrorGeneric to other side return } // TODO(roasbeef): also wait for confs before removing state peerLog.Infof("ChannelPoint(%v) is now "+ "closed", key) if err := wipeChannel(p, channel); err != nil { peerLog.Errorf("unable to wipe channel: %v", err) } } // wipeChannel removes the passed channel from all indexes associated with the // peer, and deletes the channel from the database. func wipeChannel(p *peer, channel *lnwallet.LightningChannel) error { chanID := channel.ChannelPoint() delete(p.activeChannels, *chanID) // Instruct the Htlc Switch to close this link as the channel is no // longer active. p.server.htlcSwitch.UnregisterLink(p.identityPub, chanID) htlcWireLink, ok := p.htlcManagers[*chanID] if !ok { return nil } delete(p.htlcManagers, *chanID) close(htlcWireLink) if err := channel.DeleteState(); err != nil { peerLog.Errorf("Unable to delete ChannelPoint(%v) "+ "from db %v", chanID, err) return err } return nil } // pendingPayment represents a pending HTLC which has yet to be settled by the // upstream peer. A pending payment encapsulates the initial HTLC add request // additionally coupling the index of the HTLC within the log, and an error // channel to signal the payment requester once the payment has been fully // fufilled. type pendingPayment struct { htlc *lnwire.HTLCAddRequest index uint32 err chan error } // commitmentState is the volatile+persistent state of an active channel's // commitment update state-machine. This struct is used by htlcManager's to // save meta-state required for proper functioning. type commitmentState struct { // htlcsToSettle is a list of preimages which allow us to settle one or // many of the pending HTLC's we've received from the upstream peer. htlcsToSettle map[uint32]*channeldb.Invoice // TODO(roasbeef): use once trickle+batch logic is in pendingBatch []*pendingPayment // clearedHTCLs is a map of outgoing HTLC's we've committed to in our // chain which have not yet been settled by the upstream peer. clearedHTCLs map[uint32]*pendingPayment // numUnAcked is a counter tracking the number of unacked changes we've // sent. A change is acked once we receive a new update to our local // chain from the remote peer. numUnAcked uint32 // logCommitTimer is a timer which is sent upon if we go an interval // without receiving/sending a commitment update. It's role is to // ensure both chains converge to identical state in a timely manner. // TODO(roasbeef): timer should be >> then RTT logCommitTimer <-chan time.Time // switchChan is a channel used to send packets to the htlc switch for // fowarding. switchChan chan<- *htlcPacket // sphinx is an instance of the Sphinx onion Router for this node. The // router will be used to process all incmoing Sphinx packets embedded // within HTLC add messages. sphinx *sphinx.Router // pendingCircuits tracks the remote log index of the incoming HTLC's, // mapped to the processed Sphinx packet contained within the HTLC. // This map is used as a staging area between when an HTLC is added to // the log, and when it's locked into the commitment state of both // chains. Once locked in, the processed packet is sent to the switch // along with the HTLC to forward the packet to the next hop. pendingCircuits map[uint32]*sphinx.ProcessedPacket channel *lnwallet.LightningChannel chanPoint *wire.OutPoint } // htlcManager is the primary goroutine which drives a channel's commitment // update state-machine in response to messages received via several channels. // The htlcManager reads messages from the upstream (remote) peer, and also // from several possible downstream channels managed by the htlcSwitch. In the // event that an htlc needs to be forwarded, then send-only htlcPlex chan is // used which sends htlc packets to the switch for forwarding. Additionally, // the htlcManager handles acting upon all timeouts for any active HTLC's, // manages the channel's revocation window, and also the htlc trickle // queue+timer for this active channels. func (p *peer) htlcManager(channel *lnwallet.LightningChannel, htlcPlex chan<- *htlcPacket, downstreamLink <-chan *htlcPacket, upstreamLink <-chan lnwire.Message) { chanStats := channel.StateSnapshot() peerLog.Infof("HTLC manager for ChannelPoint(%v) started, "+ "our_balance=%v, their_balance=%v, chain_height=%v", channel.ChannelPoint(), chanStats.LocalBalance, chanStats.RemoteBalance, chanStats.NumUpdates) // A new session for this active channel has just started, therefore we // need to send our initial revocation window to the remote peer. for i := 0; i < lnwallet.InitialRevocationWindow; i++ { rev, err := channel.ExtendRevocationWindow() if err != nil { peerLog.Errorf("unable to expand revocation window: %v", err) continue } p.queueMsg(rev, nil) } state := &commitmentState{ channel: channel, chanPoint: channel.ChannelPoint(), clearedHTCLs: make(map[uint32]*pendingPayment), htlcsToSettle: make(map[uint32]*channeldb.Invoice), pendingCircuits: make(map[uint32]*sphinx.ProcessedPacket), sphinx: p.server.sphinx, switchChan: htlcPlex, } // TODO(roasbeef): check to see if able to settle any currently pending // HTLC's // * also need signals when new invoices are added by the invoiceRegistry batchTimer := time.Tick(10 * time.Millisecond) out: for { select { case <-channel.UnilateralCloseSignal: // TODO(roasbeef): eliminate false positive via local close peerLog.Warnf("Remote peer has closed ChannelPoint(%v) on-chain", state.chanPoint) if err := wipeChannel(p, channel); err != nil { peerLog.Errorf("unable to wipe channel %v", err) } break out case <-channel.ForceCloseSignal: peerLog.Warnf("ChannelPoint(%v) has been force "+ "closed, disconnecting from peerID(%x)", state.chanPoint, p.id) break out //p.Disconnect() // TODO(roasbeef): prevent leaking ticker? case <-state.logCommitTimer: // If we haven't sent or received a new commitment // update in some time, check to see if we have any // pending updates we need to commit. If so, then send // an update incrementing the unacked counter is // succesful. if !state.channel.PendingUpdates() && len(state.htlcsToSettle) == 0 { continue } if sent, err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() break out } else if sent { state.numUnAcked += 1 } case <-batchTimer: // If the current batch is empty, then we have no work // here. if len(state.pendingBatch) == 0 { continue } // Otherwise, attempt to extend the remote commitment // chain including all the currently pending entries. // If the send was unsuccesful, then abaondon the // update, waiting for the revocation window to open // up. if sent, err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() break out } else if !sent { continue } state.numUnAcked += 1 case pkt := <-downstreamLink: p.handleDownStreamPkt(state, pkt) case msg, ok := <-upstreamLink: // If the upstream message link is closed, this signals // that the channel itself is being closed, therefore // we exit. if !ok { break out } p.handleUpstreamMsg(state, msg) case <-p.quit: break out } } p.wg.Done() peerLog.Tracef("htlcManager for peer %v done", p) } // handleDownStreamPkt processes an HTLC packet sent from the downstream HTLC // Switch. Possible messages sent by the switch include requests to forward new // HTLC's, timeout previously cleared HTLC's, and finally to settle currently // cleared HTLC's with the upstream peer. func (p *peer) handleDownStreamPkt(state *commitmentState, pkt *htlcPacket) { var isSettle bool switch htlc := pkt.msg.(type) { case *lnwire.HTLCAddRequest: // A new payment has been initiated via the // downstream channel, so we add the new HTLC // to our local log, then update the commitment // chains. htlc.ChannelPoint = state.chanPoint index := state.channel.AddHTLC(htlc) p.queueMsg(htlc, nil) state.pendingBatch = append(state.pendingBatch, &pendingPayment{ htlc: htlc, index: index, err: pkt.err, }) case *lnwire.HTLCSettleRequest: pre := htlc.RedemptionProofs[0] logIndex, err := state.channel.SettleHTLC(pre) if err != nil { // TODO(roasbeef): broadcast on-chain peerLog.Errorf("settle for incoming HTLC rejected: %v", err) p.Disconnect() return } htlc.ChannelPoint = state.chanPoint htlc.HTLCKey = lnwire.HTLCKey(logIndex) p.queueMsg(htlc, nil) isSettle = true } // If this newly added update exceeds the max batch size for adds, or // this is a settle request, then initiate an update. // TODO(roasbeef): enforce max HTLC's in flight limit if len(state.pendingBatch) >= 10 || isSettle { if sent, err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() return } else if !sent { return } state.numUnAcked += 1 } } // handleUpstreamMsg processes wire messages related to commitment state // updates from the upstream peer. The upstream peer is the peer whom we have a // direct channel with, updating our respective commitment chains. func (p *peer) handleUpstreamMsg(state *commitmentState, msg lnwire.Message) { switch htlcPkt := msg.(type) { // TODO(roasbeef): timeouts // * fail if can't parse sphinx mix-header case *lnwire.HTLCAddRequest: // Before adding the new HTLC to the state machine, parse the // onion object in order to obtain the routing information. blobReader := bytes.NewReader(htlcPkt.OnionBlob) onionPkt := &sphinx.OnionPacket{} if err := onionPkt.Decode(blobReader); err != nil { peerLog.Errorf("unable to decode onion pkt: %v", err) p.Disconnect() return } sphinxPacket, err := state.sphinx.ProcessOnionPacket(onionPkt) if err != nil { peerLog.Errorf("unable to process onion pkt: %v", err) p.Disconnect() return } // We just received an add request from an upstream peer, so we // add it to our state machine, then add the HTLC to our // "settle" list in the event that we know the pre-image index := state.channel.ReceiveHTLC(htlcPkt) switch sphinxPacket.Action { // We're the designated payment destination. Therefore we // attempt to see if we have an invoice locally which'll allow // us to settle this HTLC. case sphinx.ExitNode: rHash := htlcPkt.RedemptionHashes[0] invoice, err := p.server.invoices.LookupInvoice(rHash) if err != nil { // TODO(roasbeef): send a canceHTLC message if we can't settle. peerLog.Errorf("unable to query to locate: %v", err) p.Disconnect() return } // TODO(roasbeef): check values accept if >= state.htlcsToSettle[index] = invoice // There are additional hops left within this route, so we // track the next hop according to the index of this HTLC // within their log. When forwarding locked-in HLTC's to the // switch, we'll attach the routing information so the switch // can finalize the circuit. case sphinx.MoreHops: // TODO(roasbeef): send cancel + error if not in rounting table state.pendingCircuits[index] = sphinxPacket default: peerLog.Errorf("mal formed onion packet") p.Disconnect() } case *lnwire.HTLCSettleRequest: // TODO(roasbeef): this assumes no "multi-sig" pre := htlcPkt.RedemptionProofs[0] idx := uint32(htlcPkt.HTLCKey) if err := state.channel.ReceiveHTLCSettle(pre, idx); err != nil { // TODO(roasbeef): broadcast on-chain peerLog.Errorf("settle for outgoing HTLC rejected: %v", err) p.Disconnect() return } // TODO(roasbeef): add pre-image to DB in order to swipe // repeated r-values case *lnwire.CommitSignature: // We just received a new update to our local commitment chain, // validate this new commitment, closing the link if invalid. // TODO(roasbeef): use uint64 for indexes? logIndex := uint32(htlcPkt.LogIndex) sig := htlcPkt.CommitSig.Serialize() if err := state.channel.ReceiveNewCommitment(sig, logIndex); err != nil { peerLog.Errorf("unable to accept new commitment: %v", err) p.Disconnect() return } if state.numUnAcked > 0 { state.numUnAcked -= 1 // TODO(roasbeef): only start if numUnacked == 0? state.logCommitTimer = time.Tick(300 * time.Millisecond) } else { if _, err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update "+ "commitment: %v", err) p.Disconnect() return } } // Finally, since we just accepted a new state, send the remote // peer a revocation for our prior state. nextRevocation, err := state.channel.RevokeCurrentCommitment() if err != nil { peerLog.Errorf("unable to revoke current commitment: %v", err) return } p.queueMsg(nextRevocation, nil) case *lnwire.CommitRevocation: // We've received a revocation from the remote chain, if valid, // this moves the remote chain forward, and expands our // revocation window. htlcsToForward, err := state.channel.ReceiveRevocation(htlcPkt) if err != nil { peerLog.Errorf("unable to accept revocation: %v", err) p.Disconnect() return } // If any of the htlc's eligible for forwarding are pending // settling or timeing out previous outgoing payments, then we // can them from the pending set, and signal the requster (if // existing) that the payment has been fully fulfilled. var bandwidthUpdate btcutil.Amount settledPayments := make(map[lnwallet.PaymentHash]struct{}) numSettled := 0 for _, htlc := range htlcsToForward { if p, ok := state.clearedHTCLs[htlc.ParentIndex]; ok { p.err <- nil delete(state.clearedHTCLs, htlc.ParentIndex) } // TODO(roasbeef): rework log entries to a shared // interface. if htlc.EntryType != lnwallet.Add { continue } // If we can't immediately settle this HTLC, then we // can halt processing here. invoice, ok := state.htlcsToSettle[htlc.Index] if !ok { continue } // Otherwise, we settle this HTLC within our local // state update log, then send the update entry to the // remote party. preimage := invoice.Terms.PaymentPreimage logIndex, err := state.channel.SettleHTLC(preimage) if err != nil { peerLog.Errorf("unable to settle htlc: %v", err) p.Disconnect() continue } settleMsg := &lnwire.HTLCSettleRequest{ ChannelPoint: state.chanPoint, HTLCKey: lnwire.HTLCKey(logIndex), RedemptionProofs: [][32]byte{preimage}, } p.queueMsg(settleMsg, nil) delete(state.htlcsToSettle, htlc.Index) bandwidthUpdate += invoice.Terms.Value settledPayments[htlc.RHash] = struct{}{} numSettled++ } go func() { for _, htlc := range htlcsToForward { // We don't need to forward any HTLC's that we // just settled above. if _, ok := settledPayments[htlc.RHash]; ok { continue } onionPkt := state.pendingCircuits[htlc.Index] delete(state.pendingCircuits, htlc.Index) // Send this fully activated HTLC to the htlc // switch to continue the chained clear/settle. pkt, err := logEntryToHtlcPkt(*state.chanPoint, htlc, onionPkt) if err != nil { peerLog.Errorf("unable to make htlc pkt: %v", err) continue } state.switchChan <- pkt } }() if numSettled == 0 { return } // Send an update to the htlc switch of our newly available // payment bandwidth. // TODO(roasbeef): ideally should wait for next state update. if bandwidthUpdate != 0 { p.server.htlcSwitch.UpdateLink(state.chanPoint, bandwidthUpdate) } // With all the settle updates added to the local and remote // HTLC logs, initiate a state transition by updating the // remote commitment chain. if sent, err := p.updateCommitTx(state); err != nil { peerLog.Errorf("unable to update commitment: %v", err) p.Disconnect() return } else if sent { // TODO(roasbeef): wait to delete from htlcsToSettle? state.numUnAcked += 1 } // Notify the invoiceRegistry of the invoices we just settled // with this latest commitment update. for invoice, _ := range settledPayments { err := p.server.invoices.SettleInvoice(wire.ShaHash(invoice)) if err != nil { peerLog.Errorf("unable to settle invoice: %v", err) } } } } // updateCommitTx signs, then sends an update to the remote peer adding a new // commitment to their commitment chain which includes all the latest updates // we've received+processed up to this point. func (p *peer) updateCommitTx(state *commitmentState) (bool, error) { sigTheirs, logIndexTheirs, err := state.channel.SignNextCommitment() if err == lnwallet.ErrNoWindow { peerLog.Tracef("revocation window exhausted, unable to send %v", len(state.pendingBatch)) return false, nil } else if err != nil { return false, err } parsedSig, err := btcec.ParseSignature(sigTheirs, btcec.S256()) if err != nil { return false, fmt.Errorf("unable to parse sig: %v", err) } commitSig := &lnwire.CommitSignature{ ChannelPoint: state.chanPoint, CommitSig: parsedSig, LogIndex: uint64(logIndexTheirs), } p.queueMsg(commitSig, nil) // Move all pending updates to the map of cleared HTLC's, clearing out // the set of pending updates. for _, update := range state.pendingBatch { // TODO(roasbeef): add parsed next-hop info to pending batch // for multi-hop forwarding state.clearedHTCLs[update.index] = update } state.logCommitTimer = nil state.pendingBatch = nil return true, nil } // logEntryToHtlcPkt converts a particular Lightning Commitment Protocol (LCP) // log entry the corresponding htlcPacket with src/dest set along with the // proper wire message. This helepr method is provided in order to aide an // htlcManager in forwarding packets to the htlcSwitch. func logEntryToHtlcPkt(chanPoint wire.OutPoint, pd *lnwallet.PaymentDescriptor, onionPkt *sphinx.ProcessedPacket) (*htlcPacket, error) { pkt := &htlcPacket{} // TODO(roasbeef): alter after switch to log entry interface var msg lnwire.Message switch pd.EntryType { case lnwallet.Add: // TODO(roasbeef): timeout, onion blob, etc var b bytes.Buffer if err := onionPkt.Packet.Encode(&b); err != nil { return nil, err } msg = &lnwire.HTLCAddRequest{ Amount: lnwire.CreditsAmount(pd.Amount), RedemptionHashes: [][32]byte{pd.RHash}, OnionBlob: b.Bytes(), } case lnwallet.Settle: msg = &lnwire.HTLCSettleRequest{ RedemptionProofs: [][32]byte{pd.RPreimage}, } } pkt.amt = pd.Amount pkt.msg = msg pkt.srcLink = chanPoint pkt.onion = onionPkt return pkt, nil } // TODO(roasbeef): make all start/stop mutexes a CAS