package discovery import ( "bytes" "encoding/binary" "errors" "fmt" "runtime" "sync" "sync/atomic" "time" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/btcsuite/btcd/wire" "github.com/coreos/bbolt" "github.com/davecgh/go-spew/spew" "github.com/lightningnetwork/lnd/chainntnfs" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lnpeer" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/multimutex" "github.com/lightningnetwork/lnd/routing" ) var ( // messageStoreKey is a key used to create a top level bucket in // the gossiper database, used for storing messages that are to // be sent to peers. Currently this is used for reliably sending // AnnounceSignatures messages, by persisting them until a send // operation has succeeded. messageStoreKey = []byte("message-store") // ErrGossiperShuttingDown is an error that is returned if the gossiper // is in the process of being shut down. ErrGossiperShuttingDown = errors.New("gossiper is shutting down") // ErrGossipSyncerNotFound signals that we were unable to find an active // gossip syncer corresponding to a gossip query message received from // the remote peer. ErrGossipSyncerNotFound = errors.New("gossip syncer not found") ) // networkMsg couples a routing related wire message with the peer that // originally sent it. type networkMsg struct { peer lnpeer.Peer source *btcec.PublicKey msg lnwire.Message isRemote bool err chan error } // chanPolicyUpdateRequest is a request that is sent to the server when a caller // wishes to update the channel policy (fees e.g.) for a particular set of // channels. New ChannelUpdate messages will be crafted to be sent out during // the next broadcast epoch and the fee updates committed to the lower layer. type chanPolicyUpdateRequest struct { targetChans []wire.OutPoint newSchema routing.ChannelPolicy errResp chan error } // Config defines the configuration for the service. ALL elements within the // configuration MUST be non-nil for the service to carry out its duties. type Config struct { // ChainHash is a hash that indicates which resident chain of the // AuthenticatedGossiper. Any announcements that don't match this // chain hash will be ignored. // // TODO(roasbeef): eventually make into map so can de-multiplex // incoming announcements // * also need to do same for Notifier ChainHash chainhash.Hash // Router is the subsystem which is responsible for managing the // topology of lightning network. After incoming channel, node, channel // updates announcements are validated they are sent to the router in // order to be included in the LN graph. Router routing.ChannelGraphSource // ChanSeries is an interfaces that provides access to a time series // view of the current known channel graph. Each gossipSyncer enabled // peer will utilize this in order to create and respond to channel // graph time series queries. ChanSeries ChannelGraphTimeSeries // Notifier is used for receiving notifications of incoming blocks. // With each new incoming block found we process previously premature // announcements. // // TODO(roasbeef): could possibly just replace this with an epoch // channel. Notifier chainntnfs.ChainNotifier // Broadcast broadcasts a particular set of announcements to all peers // that the daemon is connected to. If supplied, the exclude parameter // indicates that the target peer should be excluded from the // broadcast. Broadcast func(skips map[routing.Vertex]struct{}, msg ...lnwire.Message) error // SendToPeer is a function which allows the service to send a set of // messages to a particular peer identified by the target public key. SendToPeer func(target *btcec.PublicKey, msg ...lnwire.Message) error // FindPeer returns the actively registered peer for a given remote // public key. An error is returned if the peer was not found or a // shutdown has been requested. FindPeer func(identityKey *btcec.PublicKey) (lnpeer.Peer, error) // NotifyWhenOnline is a function that allows the gossiper to be // notified when a certain peer comes online, allowing it to // retry sending a peer message. // // NOTE: The peerChan channel must be buffered. NotifyWhenOnline func(peer *btcec.PublicKey, peerChan chan<- lnpeer.Peer) // ProofMatureDelta the number of confirmations which is needed before // exchange the channel announcement proofs. ProofMatureDelta uint32 // TrickleDelay the period of trickle timer which flushes to the // network the pending batch of new announcements we've received since // the last trickle tick. TrickleDelay time.Duration // RetransmitDelay is the period of a timer which indicates that we // should check if we need re-broadcast any of our personal channels. RetransmitDelay time.Duration // DB is a global boltdb instance which is needed to pass it in waiting // proof storage to make waiting proofs persistent. DB *channeldb.DB // AnnSigner is an instance of the MessageSigner interface which will // be used to manually sign any outgoing channel updates. The signer // implementation should be backed by the public key of the backing // Lightning node. // // TODO(roasbeef): extract ann crafting + sign from fundingMgr into // here? AnnSigner lnwallet.MessageSigner } // AuthenticatedGossiper is a subsystem which is responsible for receiving // announcements, validating them and applying the changes to router, syncing // lightning network with newly connected nodes, broadcasting announcements // after validation, negotiating the channel announcement proofs exchange and // handling the premature announcements. All outgoing announcements are // expected to be properly signed as dictated in BOLT#7, additionally, all // incoming message are expected to be well formed and signed. Invalid messages // will be rejected by this struct. type AuthenticatedGossiper struct { // Parameters which are needed to properly handle the start and stop of // the service. To be used atomically. started uint32 stopped uint32 // bestHeight is the height of the block at the tip of the main chain // as we know it. To be used atomically. bestHeight uint32 quit chan struct{} wg sync.WaitGroup // cfg is a copy of the configuration struct that the gossiper service // was initialized with. cfg *Config // blockEpochs encapsulates a stream of block epochs that are sent at // every new block height. blockEpochs *chainntnfs.BlockEpochEvent // prematureAnnouncements maps a block height to a set of network // messages which are "premature" from our PoV. A message is premature // if it claims to be anchored in a block which is beyond the current // main chain tip as we know it. Premature network messages will be // processed once the chain tip as we know it extends to/past the // premature height. // // TODO(roasbeef): limit premature networkMsgs to N prematureAnnouncements map[uint32][]*networkMsg // prematureChannelUpdates is a map of ChannelUpdates we have received // that wasn't associated with any channel we know about. We store // them temporarily, such that we can reprocess them when a // ChannelAnnouncement for the channel is received. prematureChannelUpdates map[uint64][]*networkMsg pChanUpdMtx sync.Mutex // waitingProofs is a persistent storage of partial channel proof // announcement messages. We use it to buffer half of the material // needed to reconstruct a full authenticated channel announcement. // Once we receive the other half the channel proof, we'll be able to // properly validate it and re-broadcast it out to the network. waitingProofs *channeldb.WaitingProofStore // networkMsgs is a channel that carries new network broadcasted // message from outside the gossiper service to be processed by the // networkHandler. networkMsgs chan *networkMsg // chanPolicyUpdates is a channel that requests to update the // forwarding policy of a set of channels is sent over. chanPolicyUpdates chan *chanPolicyUpdateRequest // selfKey is the identity public key of the backing Lightning node. selfKey *btcec.PublicKey // channelMtx is used to restrict the database access to one // goroutine per channel ID. This is done to ensure that when // the gossiper is handling an announcement, the db state stays // consistent between when the DB is first read until it's written. channelMtx *multimutex.Mutex rejectMtx sync.RWMutex recentRejects map[uint64]struct{} // peerSyncers keeps track of all the gossip syncers we're maintain for // peers that understand this mode of operation. When we go to send out // new updates, for all peers in the map, we'll send the messages // directly to their gossiper, rather than broadcasting them. With this // change, we ensure we filter out all updates properly. syncerMtx sync.RWMutex peerSyncers map[routing.Vertex]*gossipSyncer sync.Mutex } // New creates a new AuthenticatedGossiper instance, initialized with the // passed configuration parameters. func New(cfg Config, selfKey *btcec.PublicKey) (*AuthenticatedGossiper, error) { storage, err := channeldb.NewWaitingProofStore(cfg.DB) if err != nil { return nil, err } return &AuthenticatedGossiper{ selfKey: selfKey, cfg: &cfg, networkMsgs: make(chan *networkMsg), quit: make(chan struct{}), chanPolicyUpdates: make(chan *chanPolicyUpdateRequest), prematureAnnouncements: make(map[uint32][]*networkMsg), prematureChannelUpdates: make(map[uint64][]*networkMsg), waitingProofs: storage, channelMtx: multimutex.NewMutex(), recentRejects: make(map[uint64]struct{}), peerSyncers: make(map[routing.Vertex]*gossipSyncer), }, nil } // SynchronizeNode sends a message to the service indicating it should // synchronize lightning topology state with the target node. This method is to // be utilized when a node connections for the first time to provide it with // the latest topology update state. In order to accomplish this, (currently) // the entire network graph is read from disk, then serialized to the format // defined within the current wire protocol. This cache of graph data is then // sent directly to the target node. func (d *AuthenticatedGossiper) SynchronizeNode(syncPeer lnpeer.Peer) error { // TODO(roasbeef): need to also store sig data in db // * will be nice when we switch to pairing sigs would only need one ^_^ // We'll collate all the gathered routing messages into a single slice // containing all the messages to be sent to the target peer. var announceMessages []lnwire.Message // We'll use this map to ensure we don't send the same node // announcement more than one time as one node may have many channel // anns we'll need to send. nodePubsSent := make(map[routing.Vertex]struct{}) // As peers are expecting channel announcements before node // announcements, we first retrieve the initial announcement, as well as // the latest channel update announcement for both of the directed edges // that make up each channel, and queue these to be sent to the peer. var ( numEdges uint32 numNodes uint32 ) if err := d.cfg.Router.ForEachChannel(func(chanInfo *channeldb.ChannelEdgeInfo, e1, e2 *channeldb.ChannelEdgePolicy) error { // First, using the parameters of the channel, along with the // channel authentication proof, we'll create re-create the // original authenticated channel announcement. If the channel // also has known validated nodes, then we'll send that as // well. if chanInfo.AuthProof != nil { chanAnn, e1Ann, e2Ann, err := CreateChanAnnouncement( chanInfo.AuthProof, chanInfo, e1, e2, ) if err != nil { return err } announceMessages = append(announceMessages, chanAnn) if e1Ann != nil { announceMessages = append(announceMessages, e1Ann) // If this edge has a validated node // announcement, that we haven't yet sent, then // we'll send that as well. nodePub := e1.Node.PubKeyBytes hasNodeAnn := e1.Node.HaveNodeAnnouncement if _, ok := nodePubsSent[nodePub]; !ok && hasNodeAnn { nodeAnn, err := e1.Node.NodeAnnouncement(true) if err != nil { return err } announceMessages = append( announceMessages, nodeAnn, ) nodePubsSent[nodePub] = struct{}{} numNodes++ } } if e2Ann != nil { announceMessages = append(announceMessages, e2Ann) // If this edge has a validated node // announcement, that we haven't yet sent, then // we'll send that as well. nodePub := e2.Node.PubKeyBytes hasNodeAnn := e2.Node.HaveNodeAnnouncement if _, ok := nodePubsSent[nodePub]; !ok && hasNodeAnn { nodeAnn, err := e2.Node.NodeAnnouncement(true) if err != nil { return err } announceMessages = append( announceMessages, nodeAnn, ) nodePubsSent[nodePub] = struct{}{} numNodes++ } } numEdges++ } return nil }); err != nil && err != channeldb.ErrGraphNoEdgesFound { log.Errorf("unable to sync infos with peer: %v", err) return err } log.Infof("Syncing channel graph state with %x, sending %v "+ "vertexes and %v edges", syncPeer.PubKey(), numNodes, numEdges) // With all the announcement messages gathered, send them all in a // single batch to the target peer. return syncPeer.SendMessage(false, announceMessages...) } // PropagateChanPolicyUpdate signals the AuthenticatedGossiper to update the // channel forwarding policies for the specified channels. If no channels are // specified, then the update will be applied to all outgoing channels from the // source node. Policy updates are done in two stages: first, the // AuthenticatedGossiper ensures the update has been committed by dependent // sub-systems, then it signs and broadcasts new updates to the network. func (d *AuthenticatedGossiper) PropagateChanPolicyUpdate( newSchema routing.ChannelPolicy, chanPoints ...wire.OutPoint) error { errChan := make(chan error, 1) policyUpdate := &chanPolicyUpdateRequest{ targetChans: chanPoints, newSchema: newSchema, errResp: errChan, } select { case d.chanPolicyUpdates <- policyUpdate: return <-errChan case <-d.quit: return fmt.Errorf("AuthenticatedGossiper shutting down") } } // Start spawns network messages handler goroutine and registers on new block // notifications in order to properly handle the premature announcements. func (d *AuthenticatedGossiper) Start() error { if !atomic.CompareAndSwapUint32(&d.started, 0, 1) { return nil } log.Info("Authenticated Gossiper is starting") // First we register for new notifications of newly discovered blocks. // We do this immediately so we'll later be able to consume any/all // blocks which were discovered. blockEpochs, err := d.cfg.Notifier.RegisterBlockEpochNtfn(nil) if err != nil { return err } d.blockEpochs = blockEpochs height, err := d.cfg.Router.CurrentBlockHeight() if err != nil { return err } d.bestHeight = height // In case we had an AnnounceSignatures ready to be sent when the // gossiper was last shut down, we must continue on our quest to // deliver this message to our peer such that they can craft the // full channel proof. if err := d.resendAnnounceSignatures(); err != nil { return err } d.wg.Add(1) go d.networkHandler() return nil } // Stop signals any active goroutines for a graceful closure. func (d *AuthenticatedGossiper) Stop() { if !atomic.CompareAndSwapUint32(&d.stopped, 0, 1) { return } log.Info("Authenticated Gossiper is stopping") d.blockEpochs.Cancel() d.syncerMtx.RLock() for _, syncer := range d.peerSyncers { syncer.Stop() } d.syncerMtx.RUnlock() close(d.quit) d.wg.Wait() } // TODO(roasbeef): need method to get current gossip timestamp? // * using mtx, check time rotate forward is needed? // ProcessRemoteAnnouncement sends a new remote announcement message along with // the peer that sent the routing message. The announcement will be processed // then added to a queue for batched trickled announcement to all connected // peers. Remote channel announcements should contain the announcement proof // and be fully validated. func (d *AuthenticatedGossiper) ProcessRemoteAnnouncement(msg lnwire.Message, peer lnpeer.Peer) chan error { errChan := make(chan error, 1) // For messages in the known set of channel series queries, we'll // dispatch the message directly to the gossipSyncer, and skip the main // processing loop. switch m := msg.(type) { case *lnwire.QueryShortChanIDs, *lnwire.QueryChannelRange, *lnwire.ReplyChannelRange, *lnwire.ReplyShortChanIDsEnd: syncer, err := d.findGossipSyncer(peer.IdentityKey()) if err != nil { log.Warnf("Unable to find gossip syncer for "+ "peer=%x: %v", peer.PubKey(), err) errChan <- err return errChan } // If we've found the message target, then we'll dispatch the // message directly to it. syncer.ProcessQueryMsg(m, peer.QuitSignal()) errChan <- nil return errChan // If a peer is updating its current update horizon, then we'll dispatch // that directly to the proper gossipSyncer. case *lnwire.GossipTimestampRange: syncer, err := d.findGossipSyncer(peer.IdentityKey()) if err != nil { log.Warnf("Unable to find gossip syncer for "+ "peer=%x: %v", peer.PubKey(), err) errChan <- err return errChan } // If we've found the message target, then we'll dispatch the // message directly to it. err = syncer.ApplyGossipFilter(m) if err != nil { log.Warnf("unable to apply gossip "+ "filter for peer=%x: %v", peer.PubKey(), err) errChan <- err return errChan } errChan <- nil return errChan } nMsg := &networkMsg{ msg: msg, isRemote: true, peer: peer, source: peer.IdentityKey(), err: errChan, } select { case d.networkMsgs <- nMsg: // If the peer that sent us this error is quitting, then we don't need // to send back an error and can return immediately. case <-peer.QuitSignal(): return nil case <-d.quit: nMsg.err <- ErrGossiperShuttingDown } return nMsg.err } // ProcessLocalAnnouncement sends a new remote announcement message along with // the peer that sent the routing message. The announcement will be processed // then added to a queue for batched trickled announcement to all connected // peers. Local channel announcements don't contain the announcement proof and // will not be fully validated. Once the channel proofs are received, the // entire channel announcement and update messages will be re-constructed and // broadcast to the rest of the network. func (d *AuthenticatedGossiper) ProcessLocalAnnouncement(msg lnwire.Message, source *btcec.PublicKey) chan error { nMsg := &networkMsg{ msg: msg, isRemote: false, source: source, err: make(chan error, 1), } select { case d.networkMsgs <- nMsg: case <-d.quit: nMsg.err <- ErrGossiperShuttingDown } return nMsg.err } // channelUpdateID is a unique identifier for ChannelUpdate messages, as // channel updates can be identified by the (ShortChannelID, ChannelFlags) // tuple. type channelUpdateID struct { // channelID represents the set of data which is needed to // retrieve all necessary data to validate the channel existence. channelID lnwire.ShortChannelID // Flags least-significant bit must be set to 0 if the creating node // corresponds to the first node in the previously sent channel // announcement and 1 otherwise. flags lnwire.ChanUpdateChanFlags } // msgWithSenders is a wrapper struct around a message, and the set of peers // that originally sent us this message. Using this struct, we can ensure that // we don't re-send a message to the peer that sent it to us in the first // place. type msgWithSenders struct { // msg is the wire message itself. msg lnwire.Message // sender is the set of peers that sent us this message. senders map[routing.Vertex]struct{} } // mergeSyncerMap is used to merge the set of senders of a particular message // with peers that we have an active gossipSyncer with. We do this to ensure // that we don't broadcast messages to any peers that we have active gossip // syncers for. func (m *msgWithSenders) mergeSyncerMap(syncers map[routing.Vertex]*gossipSyncer) { for peerPub := range syncers { m.senders[peerPub] = struct{}{} } } // deDupedAnnouncements de-duplicates announcements that have been added to the // batch. Internally, announcements are stored in three maps // (one each for channel announcements, channel updates, and node // announcements). These maps keep track of unique announcements and ensure no // announcements are duplicated. We keep the three message types separate, such // that we can send channel announcements first, then channel updates, and // finally node announcements when it's time to broadcast them. type deDupedAnnouncements struct { // channelAnnouncements are identified by the short channel id field. channelAnnouncements map[lnwire.ShortChannelID]msgWithSenders // channelUpdates are identified by the channel update id field. channelUpdates map[channelUpdateID]msgWithSenders // nodeAnnouncements are identified by the Vertex field. nodeAnnouncements map[routing.Vertex]msgWithSenders sync.Mutex } // Reset operates on deDupedAnnouncements to reset the storage of // announcements. func (d *deDupedAnnouncements) Reset() { d.Lock() defer d.Unlock() d.reset() } // reset is the private version of the Reset method. We have this so we can // call this method within method that are already holding the lock. func (d *deDupedAnnouncements) reset() { // Storage of each type of announcement (channel announcements, channel // updates, node announcements) is set to an empty map where the // appropriate key points to the corresponding lnwire.Message. d.channelAnnouncements = make(map[lnwire.ShortChannelID]msgWithSenders) d.channelUpdates = make(map[channelUpdateID]msgWithSenders) d.nodeAnnouncements = make(map[routing.Vertex]msgWithSenders) } // addMsg adds a new message to the current batch. If the message is already // present in the current batch, then this new instance replaces the latter, // and the set of senders is updated to reflect which node sent us this // message. func (d *deDupedAnnouncements) addMsg(message networkMsg) { // Depending on the message type (channel announcement, channel update, // or node announcement), the message is added to the corresponding map // in deDupedAnnouncements. Because each identifying key can have at // most one value, the announcements are de-duplicated, with newer ones // replacing older ones. switch msg := message.msg.(type) { // Channel announcements are identified by the short channel id field. case *lnwire.ChannelAnnouncement: deDupKey := msg.ShortChannelID sender := routing.NewVertex(message.source) mws, ok := d.channelAnnouncements[deDupKey] if !ok { mws = msgWithSenders{ msg: msg, senders: make(map[routing.Vertex]struct{}), } mws.senders[sender] = struct{}{} d.channelAnnouncements[deDupKey] = mws return } mws.msg = msg mws.senders[sender] = struct{}{} d.channelAnnouncements[deDupKey] = mws // Channel updates are identified by the (short channel id, // channelflags) tuple. case *lnwire.ChannelUpdate: sender := routing.NewVertex(message.source) deDupKey := channelUpdateID{ msg.ShortChannelID, msg.ChannelFlags, } oldTimestamp := uint32(0) mws, ok := d.channelUpdates[deDupKey] if ok { // If we already have seen this message, record its // timestamp. oldTimestamp = mws.msg.(*lnwire.ChannelUpdate).Timestamp } // If we already had this message with a strictly newer // timestamp, then we'll just discard the message we got. if oldTimestamp > msg.Timestamp { return } // If the message we just got is newer than what we previously // have seen, or this is the first time we see it, then we'll // add it to our map of announcements. if oldTimestamp < msg.Timestamp { mws = msgWithSenders{ msg: msg, senders: make(map[routing.Vertex]struct{}), } // We'll mark the sender of the message in the // senders map. mws.senders[sender] = struct{}{} d.channelUpdates[deDupKey] = mws return } // Lastly, if we had seen this exact message from before, with // the same timestamp, we'll add the sender to the map of // senders, such that we can skip sending this message back in // the next batch. mws.msg = msg mws.senders[sender] = struct{}{} d.channelUpdates[deDupKey] = mws // Node announcements are identified by the Vertex field. Use the // NodeID to create the corresponding Vertex. case *lnwire.NodeAnnouncement: sender := routing.NewVertex(message.source) deDupKey := routing.Vertex(msg.NodeID) // We do the same for node announcements as we did for channel // updates, as they also carry a timestamp. oldTimestamp := uint32(0) mws, ok := d.nodeAnnouncements[deDupKey] if ok { oldTimestamp = mws.msg.(*lnwire.NodeAnnouncement).Timestamp } // Discard the message if it's old. if oldTimestamp > msg.Timestamp { return } // Replace if it's newer. if oldTimestamp < msg.Timestamp { mws = msgWithSenders{ msg: msg, senders: make(map[routing.Vertex]struct{}), } mws.senders[sender] = struct{}{} d.nodeAnnouncements[deDupKey] = mws return } // Add to senders map if it's the same as we had. mws.msg = msg mws.senders[sender] = struct{}{} d.nodeAnnouncements[deDupKey] = mws } } // AddMsgs is a helper method to add multiple messages to the announcement // batch. func (d *deDupedAnnouncements) AddMsgs(msgs ...networkMsg) { d.Lock() defer d.Unlock() for _, msg := range msgs { d.addMsg(msg) } } // Emit returns the set of de-duplicated announcements to be sent out during // the next announcement epoch, in the order of channel announcements, channel // updates, and node announcements. Each message emitted, contains the set of // peers that sent us the message. This way, we can ensure that we don't waste // bandwidth by re-sending a message to the peer that sent it to us in the // first place. Additionally, the set of stored messages are reset. func (d *deDupedAnnouncements) Emit() []msgWithSenders { d.Lock() defer d.Unlock() // Get the total number of announcements. numAnnouncements := len(d.channelAnnouncements) + len(d.channelUpdates) + len(d.nodeAnnouncements) // Create an empty array of lnwire.Messages with a length equal to // the total number of announcements. msgs := make([]msgWithSenders, 0, numAnnouncements) // Add the channel announcements to the array first. for _, message := range d.channelAnnouncements { msgs = append(msgs, message) } // Then add the channel updates. for _, message := range d.channelUpdates { msgs = append(msgs, message) } // Finally add the node announcements. for _, message := range d.nodeAnnouncements { msgs = append(msgs, message) } d.reset() // Return the array of lnwire.messages. return msgs } // resendAnnounceSignatures will inspect the messageStore database bucket for // AnnounceSignatures messages that we recently tried to send to a peer. If the // associated channels still not have the full channel proofs assembled, we // will try to resend them. If we have the full proof, we can safely delete the // message from the messageStore. func (d *AuthenticatedGossiper) resendAnnounceSignatures() error { type msgTuple struct { peer *btcec.PublicKey msg *lnwire.AnnounceSignatures dbKey []byte } // Fetch all the AnnounceSignatures messages that was added to the // database. // // TODO(halseth): database access should be abstracted // behind interface. var msgsResend []msgTuple if err := d.cfg.DB.View(func(tx *bbolt.Tx) error { bucket := tx.Bucket(messageStoreKey) if bucket == nil { return nil } if err := bucket.ForEach(func(k, v []byte) error { // The database value represents the encoded // AnnounceSignatures message. r := bytes.NewReader(v) msg := &lnwire.AnnounceSignatures{} if err := msg.Decode(r, 0); err != nil { return err } // The first 33 bytes of the database key is the peer's // public key. peer, err := btcec.ParsePubKey(k[:33], btcec.S256()) if err != nil { return err } // Make a copy of the database key corresponding to // these AnnounceSignatures. dbKey := make([]byte, len(k)) copy(dbKey, k) t := msgTuple{peer, msg, dbKey} // Add the message to the slice, such that we can // resend it after the database transaction is over. msgsResend = append(msgsResend, t) return nil }); err != nil { return err } return nil }); err != nil { return err } // deleteMsg removes the message associated with the passed msgTuple // from the messageStore. deleteMsg := func(t msgTuple) error { log.Debugf("Deleting message for chanID=%v from "+ "messageStore", t.msg.ChannelID) if err := d.cfg.DB.Update(func(tx *bbolt.Tx) error { bucket := tx.Bucket(messageStoreKey) if bucket == nil { return fmt.Errorf("bucket " + "unexpectedly did not exist") } return bucket.Delete(t.dbKey[:]) }); err != nil { return fmt.Errorf("Failed deleting message "+ "from database: %v", err) } return nil } // We now iterate over these messages, resending those that we don't // have the full proof for, deleting the rest. for _, t := range msgsResend { // Check if the full channel proof exists in our graph. chanInfo, _, _, err := d.cfg.Router.GetChannelByID( t.msg.ShortChannelID) if err != nil { // If the channel cannot be found, it is most likely a // leftover message for a channel that was closed. In // this case we delete it from the message store. log.Warnf("unable to fetch channel info for "+ "chanID=%v from graph: %v. Will delete local"+ "proof from database", t.msg.ChannelID, err) if err := deleteMsg(t); err != nil { return err } continue } // 1. If the full proof does not exist in the graph, it means // that we haven't received the remote proof yet (or that we // crashed before able to assemble the full proof). Since the // remote node might think they have delivered their proof to // us, we will resend _our_ proof to trigger a resend on their // part: they will then be able to assemble and send us the // full proof. if chanInfo.AuthProof == nil { err := d.sendAnnSigReliably(t.msg, t.peer) if err != nil { return err } continue } // 2. If the proof does exist in the graph, we have // successfully received the remote proof and assembled the // full proof. In this case we can safely delete the local // proof from the database. In case the remote hasn't been able // to assemble the full proof yet (maybe because of a crash), // we will send them the full proof if we notice that they // retry sending their half proof. if chanInfo.AuthProof != nil { log.Debugf("Deleting message for chanID=%v from "+ "messageStore", t.msg.ChannelID) if err := deleteMsg(t); err != nil { return err } } } return nil } // findGossipSyncer is a utility method used by the gossiper to locate the // gossip syncer for an inbound message so we can properly dispatch the // incoming message. If a gossip syncer isn't found, then one will be created // for the target peer. func (d *AuthenticatedGossiper) findGossipSyncer(pub *btcec.PublicKey) ( *gossipSyncer, error) { target := routing.NewVertex(pub) // First, we'll try to find an existing gossiper for this peer. d.syncerMtx.RLock() syncer, ok := d.peerSyncers[target] d.syncerMtx.RUnlock() // If one exists, then we'll return it directly. if ok { return syncer, nil } return nil, ErrGossipSyncerNotFound } // networkHandler is the primary goroutine that drives this service. The roles // of this goroutine includes answering queries related to the state of the // network, syncing up newly connected peers, and also periodically // broadcasting our latest topology state to all connected peers. // // NOTE: This MUST be run as a goroutine. func (d *AuthenticatedGossiper) networkHandler() { defer d.wg.Done() // Initialize empty deDupedAnnouncements to store announcement batch. announcements := deDupedAnnouncements{} announcements.Reset() retransmitTimer := time.NewTicker(d.cfg.RetransmitDelay) defer retransmitTimer.Stop() trickleTimer := time.NewTicker(d.cfg.TrickleDelay) defer trickleTimer.Stop() // To start, we'll first check to see if there are any stale channels // that we need to re-transmit. if err := d.retransmitStaleChannels(); err != nil { log.Errorf("Unable to rebroadcast stale channels: %v", err) } // We'll use this validation to ensure that we process jobs in their // dependency order during parallel validation. validationBarrier := routing.NewValidationBarrier( runtime.NumCPU()*4, d.quit, ) for { select { // A new policy update has arrived. We'll commit it to the // sub-systems below us, then craft, sign, and broadcast a new // ChannelUpdate for the set of affected clients. case policyUpdate := <-d.chanPolicyUpdates: // First, we'll now create new fully signed updates for // the affected channels and also update the underlying // graph with the new state. newChanUpdates, err := d.processChanPolicyUpdate( policyUpdate, ) if err != nil { log.Errorf("Unable to craft policy updates: %v", err) policyUpdate.errResp <- err continue } // Finally, with the updates committed, we'll now add // them to the announcement batch to be flushed at the // start of the next epoch. announcements.AddMsgs(newChanUpdates...) policyUpdate.errResp <- nil case announcement := <-d.networkMsgs: switch announcement.msg.(type) { // Channel announcement signatures are amongst the only // messages that we'll process serially. case *lnwire.AnnounceSignatures: emittedAnnouncements := d.processNetworkAnnouncement( announcement, ) if emittedAnnouncements != nil { announcements.AddMsgs( emittedAnnouncements..., ) } continue } // If this message was recently rejected, then we won't // attempt to re-process it. if d.isRecentlyRejectedMsg(announcement.msg) { announcement.err <- fmt.Errorf("recently " + "rejected") continue } // We'll set up any dependent, and wait until a free // slot for this job opens up, this allow us to not // have thousands of goroutines active. validationBarrier.InitJobDependencies(announcement.msg) d.wg.Add(1) go func() { defer d.wg.Done() defer validationBarrier.CompleteJob() // If this message has an existing dependency, // then we'll wait until that has been fully // validated before we proceed. err := validationBarrier.WaitForDependants( announcement.msg, ) if err != nil { if err != routing.ErrVBarrierShuttingDown { log.Warnf("unexpected error "+ "during validation "+ "barrier shutdown: %v", err) } announcement.err <- err return } // Process the network announcement to // determine if this is either a new // announcement from our PoV or an edges to a // prior vertex/edge we previously proceeded. emittedAnnouncements := d.processNetworkAnnouncement( announcement, ) // If this message had any dependencies, then // we can now signal them to continue. validationBarrier.SignalDependants( announcement.msg, ) // If the announcement was accepted, then add // the emitted announcements to our announce // batch to be broadcast once the trickle timer // ticks gain. if emittedAnnouncements != nil { // TODO(roasbeef): exclude peer that // sent. announcements.AddMsgs( emittedAnnouncements..., ) } }() // A new block has arrived, so we can re-process the previously // premature announcements. case newBlock, ok := <-d.blockEpochs.Epochs: // If the channel has been closed, then this indicates // the daemon is shutting down, so we exit ourselves. if !ok { return } // Once a new block arrives, we updates our running // track of the height of the chain tip. blockHeight := uint32(newBlock.Height) atomic.StoreUint32(&d.bestHeight, blockHeight) // Next we check if we have any premature announcements // for this height, if so, then we process them once // more as normal announcements. d.Lock() numPremature := len(d.prematureAnnouncements[blockHeight]) d.Unlock() // Return early if no announcement to process. if numPremature == 0 { continue } log.Infof("Re-processing %v premature announcements "+ "for height %v", numPremature, blockHeight) d.Lock() for _, ann := range d.prematureAnnouncements[blockHeight] { emittedAnnouncements := d.processNetworkAnnouncement(ann) if emittedAnnouncements != nil { announcements.AddMsgs( emittedAnnouncements..., ) } } delete(d.prematureAnnouncements, blockHeight) d.Unlock() // The trickle timer has ticked, which indicates we should // flush to the network the pending batch of new announcements // we've received since the last trickle tick. case <-trickleTimer.C: // Emit the current batch of announcements from // deDupedAnnouncements. announcementBatch := announcements.Emit() // If the current announcements batch is nil, then we // have no further work here. if len(announcementBatch) == 0 { continue } // For the set of peers that have an active gossip // syncers, we'll collect their pubkeys so we can avoid // sending them the full message blast below. d.syncerMtx.RLock() syncerPeers := make(map[routing.Vertex]*gossipSyncer) for peerPub, syncer := range d.peerSyncers { syncerPeers[peerPub] = syncer } d.syncerMtx.RUnlock() log.Infof("Broadcasting batch of %v new announcements", len(announcementBatch)) // We'll first attempt to filter out this new message // for all peers that have active gossip syncers // active. for _, syncer := range syncerPeers { syncer.FilterGossipMsgs(announcementBatch...) } // Next, If we have new things to announce then // broadcast them to all our immediately connected // peers. for _, msgChunk := range announcementBatch { // With the syncers taken care of, we'll merge // the sender map with the set of syncers, so // we don't send out duplicate messages. msgChunk.mergeSyncerMap(syncerPeers) err := d.cfg.Broadcast( msgChunk.senders, msgChunk.msg, ) if err != nil { log.Errorf("unable to send batch "+ "announcements: %v", err) continue } } // The retransmission timer has ticked which indicates that we // should check if we need to prune or re-broadcast any of our // personal channels. This addresses the case of "zombie" // channels and channel advertisements that have been dropped, // or not properly propagated through the network. case <-retransmitTimer.C: if err := d.retransmitStaleChannels(); err != nil { log.Errorf("unable to rebroadcast stale "+ "channels: %v", err) } // The gossiper has been signalled to exit, to we exit our // main loop so the wait group can be decremented. case <-d.quit: return } } } // TODO(roasbeef): d/c peers that send updates not on our chain // InitSyncState is called by outside sub-systems when a connection is // established to a new peer that understands how to perform channel range // queries. We'll allocate a new gossip syncer for it, and start any goroutines // needed to handle new queries. The recvUpdates bool indicates if we should // continue to receive real-time updates from the remote peer once we've synced // channel state. func (d *AuthenticatedGossiper) InitSyncState(syncPeer lnpeer.Peer, recvUpdates bool) { d.syncerMtx.Lock() defer d.syncerMtx.Unlock() // If we already have a syncer, then we'll exit early as we don't want // to override it. nodeID := routing.Vertex(syncPeer.PubKey()) if _, ok := d.peerSyncers[nodeID]; ok { return } log.Infof("Creating new gossipSyncer for peer=%x", nodeID[:]) encoding := lnwire.EncodingSortedPlain syncer := newGossiperSyncer(gossipSyncerCfg{ chainHash: d.cfg.ChainHash, syncChanUpdates: recvUpdates, channelSeries: d.cfg.ChanSeries, encodingType: encoding, chunkSize: encodingTypeToChunkSize[encoding], sendToPeer: func(msgs ...lnwire.Message) error { return syncPeer.SendMessage(false, msgs...) }, }) copy(syncer.peerPub[:], nodeID[:]) d.peerSyncers[nodeID] = syncer syncer.Start() } // PruneSyncState is called by outside sub-systems once a peer that we were // previously connected to has been disconnected. In this case we can stop the // existing gossipSyncer assigned to the peer and free up resources. func (d *AuthenticatedGossiper) PruneSyncState(peer *btcec.PublicKey) { d.syncerMtx.Lock() defer d.syncerMtx.Unlock() log.Infof("Removing gossipSyncer for peer=%x", peer.SerializeCompressed()) vertex := routing.NewVertex(peer) syncer, ok := d.peerSyncers[vertex] if !ok { return } syncer.Stop() delete(d.peerSyncers, vertex) return } // isRecentlyRejectedMsg returns true if we recently rejected a message, and // false otherwise, This avoids expensive reprocessing of the message. func (d *AuthenticatedGossiper) isRecentlyRejectedMsg(msg lnwire.Message) bool { d.rejectMtx.RLock() defer d.rejectMtx.RUnlock() switch m := msg.(type) { case *lnwire.ChannelUpdate: _, ok := d.recentRejects[m.ShortChannelID.ToUint64()] return ok case *lnwire.ChannelAnnouncement: _, ok := d.recentRejects[m.ShortChannelID.ToUint64()] return ok default: return false } } // retransmitStaleChannels examines all outgoing channels that the source node // is known to maintain to check to see if any of them are "stale". A channel // is stale iff, the last timestamp of its rebroadcast is older then // broadcastInterval. func (d *AuthenticatedGossiper) retransmitStaleChannels() error { // Iterate over all of our channels and check if any of them fall // within the prune interval or re-broadcast interval. type updateTuple struct { info *channeldb.ChannelEdgeInfo edge *channeldb.ChannelEdgePolicy } var edgesToUpdate []updateTuple err := d.cfg.Router.ForAllOutgoingChannels(func( info *channeldb.ChannelEdgeInfo, edge *channeldb.ChannelEdgePolicy) error { // If there's no auth proof attached to this edge, it means // that it is a private channel not meant to be announced to // the greater network, so avoid sending channel updates for // this channel to not leak its // existence. if info.AuthProof == nil { log.Debugf("Skipping retransmission of channel "+ "without AuthProof: %v", info.ChannelID) return nil } // If this edge has a ChannelUpdate that was created before the // introduction of the MaxHTLC field, then we'll update this // edge to propagate this information in the network. if !edge.MessageFlags.HasMaxHtlc() { edgesToUpdate = append(edgesToUpdate, updateTuple{ info: info, edge: edge, }) return nil } const broadcastInterval = time.Hour * 24 timeElapsed := time.Since(edge.LastUpdate) // If it's been a full day since we've re-broadcasted the // channel, add the channel to the set of edges we need to // update. if timeElapsed >= broadcastInterval { edgesToUpdate = append(edgesToUpdate, updateTuple{ info: info, edge: edge, }) } return nil }) if err != nil && err != channeldb.ErrGraphNoEdgesFound { return fmt.Errorf("unable to retrieve outgoing channels: %v", err) } var signedUpdates []lnwire.Message for _, chanToUpdate := range edgesToUpdate { // Re-sign and update the channel on disk and retrieve our // ChannelUpdate to broadcast. chanAnn, chanUpdate, err := d.updateChannel( chanToUpdate.info, chanToUpdate.edge, ) if err != nil { return fmt.Errorf("unable to update channel: %v", err) } // If we have a valid announcement to transmit, then we'll send // that along with the update. if chanAnn != nil { signedUpdates = append(signedUpdates, chanAnn) } signedUpdates = append(signedUpdates, chanUpdate) } // If we don't have any channels to re-broadcast, then we'll exit // early. if len(signedUpdates) == 0 { return nil } log.Infof("Retransmitting %v outgoing channels", len(edgesToUpdate)) // With all the wire announcements properly crafted, we'll broadcast // our known outgoing channels to all our immediate peers. if err := d.cfg.Broadcast(nil, signedUpdates...); err != nil { return fmt.Errorf("unable to re-broadcast channels: %v", err) } return nil } // processChanPolicyUpdate generates a new set of channel updates with the new // channel policy applied for each specified channel identified by its channel // point. In the case that no channel points are specified, then the update // will be applied to all channels. Finally, the backing ChannelGraphSource is // updated with the latest information reflecting the applied updates. // // TODO(roasbeef): generalize into generic for any channel update func (d *AuthenticatedGossiper) processChanPolicyUpdate( policyUpdate *chanPolicyUpdateRequest) ([]networkMsg, error) { // First, we'll construct a set of all the channels that need to be // updated. chansToUpdate := make(map[wire.OutPoint]struct{}) for _, chanPoint := range policyUpdate.targetChans { chansToUpdate[chanPoint] = struct{}{} } haveChanFilter := len(chansToUpdate) != 0 if haveChanFilter { log.Infof("Updating routing policies for chan_points=%v", spew.Sdump(chansToUpdate)) } else { log.Infof("Updating routing policies for all chans") } type edgeWithInfo struct { info *channeldb.ChannelEdgeInfo edge *channeldb.ChannelEdgePolicy } var edgesToUpdate []edgeWithInfo // Next, we'll loop over all the outgoing channels the router knows of. // If we have a filter then we'll only collected those channels, // otherwise we'll collect them all. err := d.cfg.Router.ForAllOutgoingChannels(func( info *channeldb.ChannelEdgeInfo, edge *channeldb.ChannelEdgePolicy) error { // If we have a channel filter, and this channel isn't a part // of it, then we'll skip it. if _, ok := chansToUpdate[info.ChannelPoint]; !ok && haveChanFilter { return nil } // Now that we know we should update this channel, we'll update // its set of policies. edge.FeeBaseMSat = policyUpdate.newSchema.BaseFee edge.FeeProportionalMillionths = lnwire.MilliSatoshi( policyUpdate.newSchema.FeeRate, ) edge.TimeLockDelta = uint16(policyUpdate.newSchema.TimeLockDelta) edgesToUpdate = append(edgesToUpdate, edgeWithInfo{ info: info, edge: edge, }) return nil }) if err != nil { return nil, err } // With the set of edges we need to update retrieved, we'll now re-sign // them, and insert them into the database. var chanUpdates []networkMsg for _, edgeInfo := range edgesToUpdate { // Now that we've collected all the channels we need to update, // we'll Re-sign and update the backing ChannelGraphSource, and // retrieve our ChannelUpdate to broadcast. _, chanUpdate, err := d.updateChannel( edgeInfo.info, edgeInfo.edge, ) if err != nil { return nil, err } // We set ourselves as the source of this message to indicate // that we shouldn't skip any peers when sending this message. chanUpdates = append(chanUpdates, networkMsg{ source: d.selfKey, msg: chanUpdate, }) } return chanUpdates, nil } // processRejectedEdge examines a rejected edge to see if we can extract any // new announcements from it. An edge will get rejected if we already added // the same edge without AuthProof to the graph. If the received announcement // contains a proof, we can add this proof to our edge. We can end up in this // situation in the case where we create a channel, but for some reason fail // to receive the remote peer's proof, while the remote peer is able to fully // assemble the proof and craft the ChannelAnnouncement. func (d *AuthenticatedGossiper) processRejectedEdge( chanAnnMsg *lnwire.ChannelAnnouncement, proof *channeldb.ChannelAuthProof) ([]networkMsg, error) { // First, we'll fetch the state of the channel as we know if from the // database. chanInfo, e1, e2, err := d.cfg.Router.GetChannelByID( chanAnnMsg.ShortChannelID, ) if err != nil { return nil, err } // The edge is in the graph, and has a proof attached, then we'll just // reject it as normal. if chanInfo.AuthProof != nil { return nil, nil } // Otherwise, this means that the edge is within the graph, but it // doesn't yet have a proper proof attached. If we did not receive // the proof such that we now can add it, there's nothing more we // can do. if proof == nil { return nil, nil } // We'll then create then validate the new fully assembled // announcement. chanAnn, e1Ann, e2Ann, err := CreateChanAnnouncement( proof, chanInfo, e1, e2, ) if err != nil { return nil, err } err = routing.ValidateChannelAnn(chanAnn) if err != nil { err := fmt.Errorf("assembled channel announcement proof "+ "for shortChanID=%v isn't valid: %v", chanAnnMsg.ShortChannelID, err) log.Error(err) return nil, err } // If everything checks out, then we'll add the fully assembled proof // to the database. err = d.cfg.Router.AddProof(chanAnnMsg.ShortChannelID, proof) if err != nil { err := fmt.Errorf("unable add proof to shortChanID=%v: %v", chanAnnMsg.ShortChannelID, err) log.Error(err) return nil, err } // As we now have a complete channel announcement for this channel, // we'll construct the announcement so they can be broadcast out to all // our peers. announcements := make([]networkMsg, 0, 3) announcements = append(announcements, networkMsg{ source: d.selfKey, msg: chanAnn, }) if e1Ann != nil { announcements = append(announcements, networkMsg{ source: d.selfKey, msg: e1Ann, }) } if e2Ann != nil { announcements = append(announcements, networkMsg{ source: d.selfKey, msg: e2Ann, }) } return announcements, nil } // processNetworkAnnouncement processes a new network relate authenticated // channel or node announcement or announcements proofs. If the announcement // didn't affect the internal state due to either being out of date, invalid, // or redundant, then nil is returned. Otherwise, the set of announcements will // be returned which should be broadcasted to the rest of the network. func (d *AuthenticatedGossiper) processNetworkAnnouncement( nMsg *networkMsg) []networkMsg { isPremature := func(chanID lnwire.ShortChannelID, delta uint32) bool { // TODO(roasbeef) make height delta 6 // * or configurable bestHeight := atomic.LoadUint32(&d.bestHeight) return chanID.BlockHeight+delta > bestHeight } var announcements []networkMsg switch msg := nMsg.msg.(type) { // A new node announcement has arrived which either presents new // information about a node in one of the channels we know about, or a // updating previously advertised information. case *lnwire.NodeAnnouncement: timestamp := time.Unix(int64(msg.Timestamp), 0) // We'll quickly ask the router if it already has a // newer update for this node so we can skip validating // signatures if not required. if d.cfg.Router.IsStaleNode(msg.NodeID, timestamp) { nMsg.err <- nil return nil } if err := routing.ValidateNodeAnn(msg); err != nil { err := fmt.Errorf("unable to validate "+ "node announcement: %v", err) log.Error(err) nMsg.err <- err return nil } features := lnwire.NewFeatureVector( msg.Features, lnwire.GlobalFeatures, ) node := &channeldb.LightningNode{ HaveNodeAnnouncement: true, LastUpdate: timestamp, Addresses: msg.Addresses, PubKeyBytes: msg.NodeID, Alias: msg.Alias.String(), AuthSigBytes: msg.Signature.ToSignatureBytes(), Features: features, Color: msg.RGBColor, ExtraOpaqueData: msg.ExtraOpaqueData, } if err := d.cfg.Router.AddNode(node); err != nil { if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { log.Debug(err) } else { log.Error(err) } nMsg.err <- err return nil } // In order to ensure we don't leak unadvertised nodes, we'll // make a quick check to ensure this node intends to publicly // advertise itself to the network. isPublic, err := d.cfg.Router.IsPublicNode(node.PubKeyBytes) if err != nil { log.Errorf("Unable to determine if node %x is "+ "advertised: %v", node.PubKeyBytes, err) nMsg.err <- err return nil } // If it does, we'll add their announcement to our batch so that // it can be broadcast to the rest of our peers. if isPublic { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: msg, }) } else { log.Tracef("Skipping broadcasting node announcement "+ "for %x due to being unadvertised", msg.NodeID) } nMsg.err <- nil // TODO(roasbeef): get rid of the above return announcements // A new channel announcement has arrived, this indicates the // *creation* of a new channel within the network. This only advertises // the existence of a channel and not yet the routing policies in // either direction of the channel. case *lnwire.ChannelAnnouncement: // We'll ignore any channel announcements that target any chain // other than the set of chains we know of. if !bytes.Equal(msg.ChainHash[:], d.cfg.ChainHash[:]) { err := fmt.Errorf("Ignoring ChannelAnnouncement from "+ "chain=%v, gossiper on chain=%v", msg.ChainHash, d.cfg.ChainHash) log.Errorf(err.Error()) d.rejectMtx.Lock() d.recentRejects[msg.ShortChannelID.ToUint64()] = struct{}{} d.rejectMtx.Unlock() nMsg.err <- err return nil } // If the advertised inclusionary block is beyond our knowledge // of the chain tip, then we'll put the announcement in limbo // to be fully verified once we advance forward in the chain. if nMsg.isRemote && isPremature(msg.ShortChannelID, 0) { blockHeight := msg.ShortChannelID.BlockHeight log.Infof("Announcement for chan_id=(%v), is "+ "premature: advertises height %v, only "+ "height %v is known", msg.ShortChannelID.ToUint64(), msg.ShortChannelID.BlockHeight, atomic.LoadUint32(&d.bestHeight)) d.Lock() d.prematureAnnouncements[blockHeight] = append( d.prematureAnnouncements[blockHeight], nMsg, ) d.Unlock() return nil } // At this point, we'll now ask the router if this is a stale // update. If so we can skip all the processing below. if d.cfg.Router.IsKnownEdge(msg.ShortChannelID) { nMsg.err <- nil return nil } // If this is a remote channel announcement, then we'll validate // all the signatures within the proof as it should be well // formed. var proof *channeldb.ChannelAuthProof if nMsg.isRemote { if err := routing.ValidateChannelAnn(msg); err != nil { err := fmt.Errorf("unable to validate "+ "announcement: %v", err) d.rejectMtx.Lock() d.recentRejects[msg.ShortChannelID.ToUint64()] = struct{}{} d.rejectMtx.Unlock() log.Error(err) nMsg.err <- err return nil } // If the proof checks out, then we'll save the proof // itself to the database so we can fetch it later when // gossiping with other nodes. proof = &channeldb.ChannelAuthProof{ NodeSig1Bytes: msg.NodeSig1.ToSignatureBytes(), NodeSig2Bytes: msg.NodeSig2.ToSignatureBytes(), BitcoinSig1Bytes: msg.BitcoinSig1.ToSignatureBytes(), BitcoinSig2Bytes: msg.BitcoinSig2.ToSignatureBytes(), } } // With the proof validate (if necessary), we can now store it // within the database for our path finding and syncing needs. var featureBuf bytes.Buffer if err := msg.Features.Encode(&featureBuf); err != nil { log.Errorf("unable to encode features: %v", err) nMsg.err <- err return nil } edge := &channeldb.ChannelEdgeInfo{ ChannelID: msg.ShortChannelID.ToUint64(), ChainHash: msg.ChainHash, NodeKey1Bytes: msg.NodeID1, NodeKey2Bytes: msg.NodeID2, BitcoinKey1Bytes: msg.BitcoinKey1, BitcoinKey2Bytes: msg.BitcoinKey2, AuthProof: proof, Features: featureBuf.Bytes(), ExtraOpaqueData: msg.ExtraOpaqueData, } // We will add the edge to the channel router. If the nodes // present in this channel are not present in the database, a // partial node will be added to represent each node while we // wait for a node announcement. // // Before we add the edge to the database, we obtain // the mutex for this channel ID. We do this to ensure // no other goroutine has read the database and is now // making decisions based on this DB state, before it // writes to the DB. d.channelMtx.Lock(msg.ShortChannelID.ToUint64()) defer d.channelMtx.Unlock(msg.ShortChannelID.ToUint64()) if err := d.cfg.Router.AddEdge(edge); err != nil { // If the edge was rejected due to already being known, // then it may be that case that this new message has a // fresh channel proof, so we'll check. if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { // Attempt to process the rejected message to // see if we get any new announcements. anns, rErr := d.processRejectedEdge(msg, proof) if rErr != nil { d.rejectMtx.Lock() d.recentRejects[msg.ShortChannelID.ToUint64()] = struct{}{} d.rejectMtx.Unlock() nMsg.err <- rErr return nil } // If while processing this rejected edge, we // realized there's a set of announcements we // could extract, then we'll return those // directly. if len(anns) != 0 { nMsg.err <- nil return anns } // Otherwise, this is just a regular rejected // edge. log.Debugf("Router rejected channel "+ "edge: %v", err) } else { log.Tracef("Router rejected channel "+ "edge: %v", err) } nMsg.err <- err return nil } // If we earlier received any ChannelUpdates for this channel, // we can now process them, as the channel is added to the // graph. shortChanID := msg.ShortChannelID.ToUint64() var channelUpdates []*networkMsg d.pChanUpdMtx.Lock() for _, cu := range d.prematureChannelUpdates[shortChanID] { channelUpdates = append(channelUpdates, cu) } // Now delete the premature ChannelUpdates, since we added them // all to the queue of network messages. delete(d.prematureChannelUpdates, shortChanID) d.pChanUpdMtx.Unlock() // Launch a new goroutine to handle each ChannelUpdate, this to // ensure we don't block here, as we can handle only one // announcement at a time. for _, cu := range channelUpdates { d.wg.Add(1) go func(nMsg *networkMsg) { defer d.wg.Done() switch msg := nMsg.msg.(type) { // Reprocess the message, making sure we return // an error to the original caller in case the // gossiper shuts down. case *lnwire.ChannelUpdate: log.Debugf("Reprocessing"+ " ChannelUpdate for "+ "shortChanID=%v", msg.ShortChannelID.ToUint64()) select { case d.networkMsgs <- nMsg: case <-d.quit: nMsg.err <- ErrGossiperShuttingDown } // We don't expect any other message type than // ChannelUpdate to be in this map. default: log.Errorf("Unsupported message type "+ "found among ChannelUpdates: "+ "%T", msg) } }(cu) } // Channel announcement was successfully proceeded and know it // might be broadcast to other connected nodes if it was // announcement with proof (remote). if proof != nil { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: msg, }) } nMsg.err <- nil return announcements // A new authenticated channel edge update has arrived. This indicates // that the directional information for an already known channel has // been updated. case *lnwire.ChannelUpdate: // We'll ignore any channel announcements that target any chain // other than the set of chains we know of. if !bytes.Equal(msg.ChainHash[:], d.cfg.ChainHash[:]) { err := fmt.Errorf("Ignoring ChannelUpdate from "+ "chain=%v, gossiper on chain=%v", msg.ChainHash, d.cfg.ChainHash) log.Errorf(err.Error()) d.rejectMtx.Lock() d.recentRejects[msg.ShortChannelID.ToUint64()] = struct{}{} d.rejectMtx.Unlock() nMsg.err <- err return nil } blockHeight := msg.ShortChannelID.BlockHeight shortChanID := msg.ShortChannelID.ToUint64() // If the advertised inclusionary block is beyond our knowledge // of the chain tip, then we'll put the announcement in limbo // to be fully verified once we advance forward in the chain. if nMsg.isRemote && isPremature(msg.ShortChannelID, 0) { log.Infof("Update announcement for "+ "short_chan_id(%v), is premature: advertises "+ "height %v, only height %v is known", shortChanID, blockHeight, atomic.LoadUint32(&d.bestHeight)) d.Lock() d.prematureAnnouncements[blockHeight] = append( d.prematureAnnouncements[blockHeight], nMsg, ) d.Unlock() return nil } // Before we perform any of the expensive checks below, we'll // make sure that the router doesn't already have a fresher // announcement for this edge. timestamp := time.Unix(int64(msg.Timestamp), 0) if d.cfg.Router.IsStaleEdgePolicy( msg.ShortChannelID, timestamp, msg.ChannelFlags, ) { nMsg.err <- nil return nil } // Get the node pub key as far as we don't have it in channel // update announcement message. We'll need this to properly // verify message signature. // // We make sure to obtain the mutex for this channel ID // before we access the database. This ensures the state // we read from the database has not changed between this // point and when we call UpdateEdge() later. d.channelMtx.Lock(msg.ShortChannelID.ToUint64()) defer d.channelMtx.Unlock(msg.ShortChannelID.ToUint64()) chanInfo, _, _, err := d.cfg.Router.GetChannelByID(msg.ShortChannelID) if err != nil { switch err { case channeldb.ErrGraphNotFound: fallthrough case channeldb.ErrGraphNoEdgesFound: fallthrough case channeldb.ErrEdgeNotFound: // If the edge corresponding to this // ChannelUpdate was not found in the graph, // this might be a channel in the process of // being opened, and we haven't processed our // own ChannelAnnouncement yet, hence it is not // found in the graph. This usually gets // resolved after the channel proofs are // exchanged and the channel is broadcasted to // the rest of the network, but in case this // is a private channel this won't ever happen. // Because of this, we temporarily add it to a // map, and reprocess it after our own // ChannelAnnouncement has been processed. d.pChanUpdMtx.Lock() d.prematureChannelUpdates[shortChanID] = append( d.prematureChannelUpdates[shortChanID], nMsg, ) d.pChanUpdMtx.Unlock() log.Debugf("Got ChannelUpdate for edge not "+ "found in graph(shortChanID=%v), "+ "saving for reprocessing later", shortChanID) // NOTE: We don't return anything on the error // channel for this message, as we expect that // will be done when this ChannelUpdate is // later reprocessed. return nil default: err := fmt.Errorf("unable to validate "+ "channel update short_chan_id=%v: %v", shortChanID, err) log.Error(err) nMsg.err <- err d.rejectMtx.Lock() d.recentRejects[msg.ShortChannelID.ToUint64()] = struct{}{} d.rejectMtx.Unlock() return nil } } // The least-significant bit in the flag on the channel update // announcement tells us "which" side of the channels directed // edge is being updated. var pubKey *btcec.PublicKey switch { case msg.ChannelFlags&lnwire.ChanUpdateDirection == 0: pubKey, _ = chanInfo.NodeKey1() case msg.ChannelFlags&lnwire.ChanUpdateDirection == 1: pubKey, _ = chanInfo.NodeKey2() } // Validate the channel announcement with the expected public key and // channel capacity. In the case of an invalid channel update, we'll // return an error to the caller and exit early. err = routing.ValidateChannelUpdateAnn(pubKey, chanInfo.Capacity, msg) if err != nil { rErr := fmt.Errorf("unable to validate channel "+ "update announcement for short_chan_id=%v: %v", spew.Sdump(msg.ShortChannelID), err) log.Error(rErr) nMsg.err <- rErr return nil } update := &channeldb.ChannelEdgePolicy{ SigBytes: msg.Signature.ToSignatureBytes(), ChannelID: shortChanID, LastUpdate: timestamp, MessageFlags: msg.MessageFlags, ChannelFlags: msg.ChannelFlags, TimeLockDelta: msg.TimeLockDelta, MinHTLC: msg.HtlcMinimumMsat, MaxHTLC: msg.HtlcMaximumMsat, FeeBaseMSat: lnwire.MilliSatoshi(msg.BaseFee), FeeProportionalMillionths: lnwire.MilliSatoshi(msg.FeeRate), ExtraOpaqueData: msg.ExtraOpaqueData, } if err := d.cfg.Router.UpdateEdge(update); err != nil { if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) { log.Debug(err) } else { d.rejectMtx.Lock() d.recentRejects[msg.ShortChannelID.ToUint64()] = struct{}{} d.rejectMtx.Unlock() log.Error(err) } nMsg.err <- err return nil } // If this is a local ChannelUpdate without an AuthProof, it // means it is an update to a channel that is not (yet) // supposed to be announced to the greater network. However, // our channel counter party will need to be given the update, // so we'll try sending the update directly to the remote peer. if !nMsg.isRemote && chanInfo.AuthProof == nil { // Get our peer's public key. var remotePub *btcec.PublicKey switch { case msg.ChannelFlags&lnwire.ChanUpdateDirection == 0: remotePub, _ = chanInfo.NodeKey2() case msg.ChannelFlags&lnwire.ChanUpdateDirection == 1: remotePub, _ = chanInfo.NodeKey1() } sPeer, err := d.cfg.FindPeer(remotePub) if err != nil { log.Errorf("unable to send channel update -- "+ "could not find peer %x: %v", remotePub.SerializeCompressed(), err) } else { // Send ChannelUpdate directly to remotePeer. // TODO(halseth): make reliable send? err = sPeer.SendMessage(false, msg) if err != nil { log.Errorf("unable to send channel "+ "update message to peer %x: %v", remotePub.SerializeCompressed(), err) } } } // Channel update announcement was successfully processed and // now it can be broadcast to the rest of the network. However, // we'll only broadcast the channel update announcement if it // has an attached authentication proof. if chanInfo.AuthProof != nil { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: msg, }) } nMsg.err <- nil return announcements // A new signature announcement has been received. This indicates // willingness of nodes involved in the funding of a channel to // announce this new channel to the rest of the world. case *lnwire.AnnounceSignatures: needBlockHeight := msg.ShortChannelID.BlockHeight + d.cfg.ProofMatureDelta shortChanID := msg.ShortChannelID.ToUint64() prefix := "local" if nMsg.isRemote { prefix = "remote" } log.Infof("Received new %v channel announcement: %v", prefix, spew.Sdump(msg)) // By the specification, channel announcement proofs should be // sent after some number of confirmations after channel was // registered in bitcoin blockchain. Therefore, we check if the // proof is premature. If so we'll halt processing until the // expected announcement height. This allows us to be tolerant // to other clients if this constraint was changed. if isPremature(msg.ShortChannelID, d.cfg.ProofMatureDelta) { d.Lock() d.prematureAnnouncements[needBlockHeight] = append( d.prematureAnnouncements[needBlockHeight], nMsg, ) d.Unlock() log.Infof("Premature proof announcement, "+ "current block height lower than needed: %v <"+ " %v, add announcement to reprocessing batch", atomic.LoadUint32(&d.bestHeight), needBlockHeight) return nil } // Ensure that we know of a channel with the target channel ID // before proceeding further. // // We must acquire the mutex for this channel ID before getting // the channel from the database, to ensure what we read does // not change before we call AddProof() later. d.channelMtx.Lock(msg.ShortChannelID.ToUint64()) defer d.channelMtx.Unlock(msg.ShortChannelID.ToUint64()) chanInfo, e1, e2, err := d.cfg.Router.GetChannelByID( msg.ShortChannelID) if err != nil { // TODO(andrew.shvv) this is dangerous because remote // node might rewrite the waiting proof. proof := channeldb.NewWaitingProof(nMsg.isRemote, msg) if err := d.waitingProofs.Add(proof); err != nil { err := fmt.Errorf("unable to store "+ "the proof for short_chan_id=%v: %v", shortChanID, err) log.Error(err) nMsg.err <- err return nil } log.Infof("Orphan %v proof announcement with "+ "short_chan_id=%v, adding"+ "to waiting batch", prefix, shortChanID) nMsg.err <- nil return nil } nodeID := nMsg.source.SerializeCompressed() isFirstNode := bytes.Equal(nodeID, chanInfo.NodeKey1Bytes[:]) isSecondNode := bytes.Equal(nodeID, chanInfo.NodeKey2Bytes[:]) // Ensure that channel that was retrieved belongs to the peer // which sent the proof announcement. if !(isFirstNode || isSecondNode) { err := fmt.Errorf("channel that was received not "+ "belongs to the peer which sent the proof, "+ "short_chan_id=%v", shortChanID) log.Error(err) nMsg.err <- err return nil } // If proof was sent by a local sub-system, then we'll // send the announcement signature to the remote node // so they can also reconstruct the full channel // announcement. if !nMsg.isRemote { var remotePeer *btcec.PublicKey if isFirstNode { remotePeer, _ = chanInfo.NodeKey2() } else { remotePeer, _ = chanInfo.NodeKey1() } // Since the remote peer might not be online // we'll call a method that will attempt to // deliver the proof when it comes online. err := d.sendAnnSigReliably(msg, remotePeer) if err != nil { err := fmt.Errorf("unable to send reliably "+ "to remote for short_chan_id=%v: %v", shortChanID, err) log.Error(err) nMsg.err <- err return nil } } // Check if we already have the full proof for this channel. if chanInfo.AuthProof != nil { // If we already have the fully assembled proof, then // the peer sending us their proof has probably not // received our local proof yet. So be kind and send // them the full proof. if nMsg.isRemote { peerID := nMsg.source.SerializeCompressed() log.Debugf("Got AnnounceSignatures for " + "channel with full proof.") d.wg.Add(1) go func() { defer d.wg.Done() log.Debugf("Received half proof for "+ "channel %v with existing "+ "full proof. Sending full "+ "proof to peer=%x", msg.ChannelID, peerID) chanAnn, _, _, err := CreateChanAnnouncement( chanInfo.AuthProof, chanInfo, e1, e2, ) if err != nil { log.Errorf("unable to gen "+ "ann: %v", err) return } err = nMsg.peer.SendMessage( false, chanAnn, ) if err != nil { log.Errorf("Failed sending "+ "full proof to "+ "peer=%x: %v", peerID, err) return } log.Debugf("Full proof sent to peer=%x"+ " for chanID=%v", peerID, msg.ChannelID) }() } log.Debugf("Already have proof for channel "+ "with chanID=%v", msg.ChannelID) nMsg.err <- nil return nil } // Check that we received the opposite proof. If so, then we're // now able to construct the full proof, and create the channel // announcement. If we didn't receive the opposite half of the // proof than we should store it this one, and wait for // opposite to be received. proof := channeldb.NewWaitingProof(nMsg.isRemote, msg) oppositeProof, err := d.waitingProofs.Get(proof.OppositeKey()) if err != nil && err != channeldb.ErrWaitingProofNotFound { err := fmt.Errorf("unable to get "+ "the opposite proof for short_chan_id=%v: %v", shortChanID, err) log.Error(err) nMsg.err <- err return nil } if err == channeldb.ErrWaitingProofNotFound { if err := d.waitingProofs.Add(proof); err != nil { err := fmt.Errorf("unable to store "+ "the proof for short_chan_id=%v: %v", shortChanID, err) log.Error(err) nMsg.err <- err return nil } log.Infof("1/2 of channel ann proof received for "+ "short_chan_id=%v, waiting for other half", shortChanID) nMsg.err <- nil return nil } // We now have both halves of the channel announcement proof, // then we'll reconstruct the initial announcement so we can // validate it shortly below. var dbProof channeldb.ChannelAuthProof if isFirstNode { dbProof.NodeSig1Bytes = msg.NodeSignature.ToSignatureBytes() dbProof.NodeSig2Bytes = oppositeProof.NodeSignature.ToSignatureBytes() dbProof.BitcoinSig1Bytes = msg.BitcoinSignature.ToSignatureBytes() dbProof.BitcoinSig2Bytes = oppositeProof.BitcoinSignature.ToSignatureBytes() } else { dbProof.NodeSig1Bytes = oppositeProof.NodeSignature.ToSignatureBytes() dbProof.NodeSig2Bytes = msg.NodeSignature.ToSignatureBytes() dbProof.BitcoinSig1Bytes = oppositeProof.BitcoinSignature.ToSignatureBytes() dbProof.BitcoinSig2Bytes = msg.BitcoinSignature.ToSignatureBytes() } chanAnn, e1Ann, e2Ann, err := CreateChanAnnouncement( &dbProof, chanInfo, e1, e2, ) if err != nil { log.Error(err) nMsg.err <- err return nil } // With all the necessary components assembled validate the // full channel announcement proof. if err := routing.ValidateChannelAnn(chanAnn); err != nil { err := fmt.Errorf("channel announcement proof "+ "for short_chan_id=%v isn't valid: %v", shortChanID, err) log.Error(err) nMsg.err <- err return nil } // If the channel was returned by the router it means that // existence of funding point and inclusion of nodes bitcoin // keys in it already checked by the router. In this stage we // should check that node keys are attest to the bitcoin keys // by validating the signatures of announcement. If proof is // valid then we'll populate the channel edge with it, so we // can announce it on peer connect. err = d.cfg.Router.AddProof(msg.ShortChannelID, &dbProof) if err != nil { err := fmt.Errorf("unable add proof to the "+ "channel chanID=%v: %v", msg.ChannelID, err) log.Error(err) nMsg.err <- err return nil } err = d.waitingProofs.Remove(proof.OppositeKey()) if err != nil { err := fmt.Errorf("unable remove opposite proof "+ "for the channel with chanID=%v: %v", msg.ChannelID, err) log.Error(err) nMsg.err <- err return nil } // Proof was successfully created and now can announce the // channel to the remain network. log.Infof("Fully valid channel proof for short_chan_id=%v "+ "constructed, adding to next ann batch", shortChanID) // Assemble the necessary announcements to add to the next // broadcasting batch. announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: chanAnn, }) if e1Ann != nil { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: e1Ann, }) } if e2Ann != nil { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: e2Ann, }) } // We'll also send along the node announcements for each channel // participant if we know of them. node1Ann, err := d.fetchNodeAnn(chanInfo.NodeKey1Bytes) if err != nil { log.Debugf("Unable to fetch node announcement for "+ "%x: %v", chanInfo.NodeKey1Bytes, err) } else { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: node1Ann, }) } node2Ann, err := d.fetchNodeAnn(chanInfo.NodeKey2Bytes) if err != nil { log.Debugf("Unable to fetch node announcement for "+ "%x: %v", chanInfo.NodeKey2Bytes, err) } else { announcements = append(announcements, networkMsg{ peer: nMsg.peer, source: nMsg.source, msg: node2Ann, }) } nMsg.err <- nil return announcements default: nMsg.err <- errors.New("wrong type of the announcement") return nil } } // fetchNodeAnn fetches the latest signed node announcement from our point of // view for the node with the given public key. func (d *AuthenticatedGossiper) fetchNodeAnn( pubKey [33]byte) (*lnwire.NodeAnnouncement, error) { node, err := d.cfg.Router.FetchLightningNode(pubKey) if err != nil { return nil, err } return node.NodeAnnouncement(true) } // sendAnnSigReliably will try to send the provided local AnnounceSignatures // to the remote peer, waiting for it to come online if necessary. This // method returns after adding the message to persistent storage, such // that the caller knows that the message will be delivered at one point. func (d *AuthenticatedGossiper) sendAnnSigReliably( msg *lnwire.AnnounceSignatures, remotePeer *btcec.PublicKey) error { // We first add this message to the database, such that in case // we do not succeed in sending it to the peer, we'll fetch it // from the DB next time we start, and retry. We use the peer ID // + shortChannelID as key, as there possibly is more than one // channel opening in progress to the same peer. var key [41]byte copy(key[:33], remotePeer.SerializeCompressed()) binary.BigEndian.PutUint64(key[33:], msg.ShortChannelID.ToUint64()) err := d.cfg.DB.Update(func(tx *bbolt.Tx) error { bucket, err := tx.CreateBucketIfNotExists(messageStoreKey) if err != nil { return err } // Encode the AnnounceSignatures message. var b bytes.Buffer if err := msg.Encode(&b, 0); err != nil { return err } // Add the encoded message to the database using the peer // + shortChanID as key. return bucket.Put(key[:], b.Bytes()) }) if err != nil { return err } // We have succeeded adding the message to the database. We now launch // a goroutine that will keep on trying sending the message to the // remote peer until it succeeds, or the gossiper shuts down. In case // of success, the message will be removed from the database. d.wg.Add(1) go func() { defer d.wg.Done() for { log.Debugf("Sending AnnounceSignatures for channel "+ "%v to remote peer %x", msg.ChannelID, remotePeer.SerializeCompressed()) err := d.cfg.SendToPeer(remotePeer, msg) if err == nil { // Sending succeeded, we can // continue the flow. break } log.Errorf("unable to send AnnounceSignatures message "+ "to peer(%x): %v. Will retry when online.", remotePeer.SerializeCompressed(), err) peerChan := make(chan lnpeer.Peer, 1) d.cfg.NotifyWhenOnline(remotePeer, peerChan) select { case <-peerChan: // Retry sending. log.Infof("Peer %x reconnected. Retry sending"+ " AnnounceSignatures.", remotePeer.SerializeCompressed()) case <-d.quit: log.Infof("Gossiper shutting down, did not " + "send AnnounceSignatures.") return } } log.Infof("Sent channel announcement proof to remote peer: %x", remotePeer.SerializeCompressed()) }() // This method returns after the message has been added to the database, // such that the caller don't have to wait until the message is actually // delivered, but can be assured that it will be delivered eventually // when this method returns. return nil } // updateChannel creates a new fully signed update for the channel, and updates // the underlying graph with the new state. func (d *AuthenticatedGossiper) updateChannel(info *channeldb.ChannelEdgeInfo, edge *channeldb.ChannelEdgePolicy) (*lnwire.ChannelAnnouncement, *lnwire.ChannelUpdate, error) { // We'll make sure we support the new max_htlc field if not already // present. if !edge.MessageFlags.HasMaxHtlc() { edge.MessageFlags |= lnwire.ChanUpdateOptionMaxHtlc edge.MaxHTLC = lnwire.NewMSatFromSatoshis(info.Capacity) } // Make sure timestamp is always increased, such that our update gets // propagated. timestamp := time.Now().Unix() if timestamp <= edge.LastUpdate.Unix() { timestamp = edge.LastUpdate.Unix() + 1 } edge.LastUpdate = time.Unix(timestamp, 0) chanUpdate := &lnwire.ChannelUpdate{ ChainHash: info.ChainHash, ShortChannelID: lnwire.NewShortChanIDFromInt(edge.ChannelID), Timestamp: uint32(timestamp), MessageFlags: edge.MessageFlags, ChannelFlags: edge.ChannelFlags, TimeLockDelta: edge.TimeLockDelta, HtlcMinimumMsat: edge.MinHTLC, HtlcMaximumMsat: edge.MaxHTLC, BaseFee: uint32(edge.FeeBaseMSat), FeeRate: uint32(edge.FeeProportionalMillionths), ExtraOpaqueData: edge.ExtraOpaqueData, } var err error chanUpdate.Signature, err = lnwire.NewSigFromRawSignature(edge.SigBytes) if err != nil { return nil, nil, err } // With the update applied, we'll generate a new signature over a // digest of the channel announcement itself. sig, err := SignAnnouncement(d.cfg.AnnSigner, d.selfKey, chanUpdate) if err != nil { return nil, nil, err } // Next, we'll set the new signature in place, and update the reference // in the backing slice. edge.SigBytes = sig.Serialize() chanUpdate.Signature, err = lnwire.NewSigFromSignature(sig) if err != nil { return nil, nil, err } // To ensure that our signature is valid, we'll verify it ourself // before committing it to the slice returned. err = routing.ValidateChannelUpdateAnn(d.selfKey, info.Capacity, chanUpdate) if err != nil { return nil, nil, fmt.Errorf("generated invalid channel "+ "update sig: %v", err) } // Finally, we'll write the new edge policy to disk. if err := d.cfg.Router.UpdateEdge(edge); err != nil { return nil, nil, err } // We'll also create the original channel announcement so the two can // be broadcast along side each other (if necessary), but only if we // have a full channel announcement for this channel. var chanAnn *lnwire.ChannelAnnouncement if info.AuthProof != nil { chanID := lnwire.NewShortChanIDFromInt(info.ChannelID) chanAnn = &lnwire.ChannelAnnouncement{ ShortChannelID: chanID, NodeID1: info.NodeKey1Bytes, NodeID2: info.NodeKey2Bytes, ChainHash: info.ChainHash, BitcoinKey1: info.BitcoinKey1Bytes, Features: lnwire.NewRawFeatureVector(), BitcoinKey2: info.BitcoinKey2Bytes, ExtraOpaqueData: edge.ExtraOpaqueData, } chanAnn.NodeSig1, err = lnwire.NewSigFromRawSignature( info.AuthProof.NodeSig1Bytes, ) if err != nil { return nil, nil, err } chanAnn.NodeSig2, err = lnwire.NewSigFromRawSignature( info.AuthProof.NodeSig2Bytes, ) if err != nil { return nil, nil, err } chanAnn.BitcoinSig1, err = lnwire.NewSigFromRawSignature( info.AuthProof.BitcoinSig1Bytes, ) if err != nil { return nil, nil, err } chanAnn.BitcoinSig2, err = lnwire.NewSigFromRawSignature( info.AuthProof.BitcoinSig2Bytes, ) if err != nil { return nil, nil, err } } return chanAnn, chanUpdate, err }