package chainview import ( "fmt" "sync" "sync/atomic" "github.com/lightninglabs/neutrino" "github.com/roasbeef/btcd/chaincfg/chainhash" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcrpcclient" "github.com/roasbeef/btcutil" "github.com/roasbeef/btcutil/gcs/builder" "github.com/roasbeef/btcwallet/waddrmgr" ) // CfFilteredChainView is an implementation of the FilteredChainView interface // which is supported by an underlying Bitcoin light client which supports // client side filtering of Golomb Coded Sets. Rather than fetching all the // blocks, the light client is able to query fitlers locally, to test if an // item in a block modifies any of our watched set of UTXOs. type CfFilteredChainView struct { started int32 stopped int32 // p2pNode is a pointer to the running GCS-filter supported Bitcoin // light clientl p2pNode *neutrino.ChainService // chainView is the active rescan which only watches our specified // sub-set of the UTXO set. chainView neutrino.Rescan // rescanErrChan is the channel that any errors encountered during the // rescan will be sent over. rescanErrChan <-chan error // newBlocks is the channel in which new filtered blocks are sent over. newBlocks chan *FilteredBlock // staleBlocks is the channel in which blocks that have been // disconnected from the mainchain are sent over. staleBlocks chan *FilteredBlock // filterUpdates is a channel in which updates to the utxo filter // attached to this instance are sent over. filterUpdates chan filterUpdate // chainFilter is the filterMtx sync.RWMutex chainFilter map[wire.OutPoint]struct{} quit chan struct{} wg sync.WaitGroup } // A compile time check to ensure CfFilteredChainView implements the // chainview.FilteredChainView. var _ FilteredChainView = (*CfFilteredChainView)(nil) // NewCfFilteredChainView creates a new instance of the CfFilteredChainView // which is connected to an active neutrino node. // // NOTE: The node should already be running an syncing before being passed into // this function. func NewCfFilteredChainView(node *neutrino.ChainService) (*CfFilteredChainView, error) { return &CfFilteredChainView{ newBlocks: make(chan *FilteredBlock), staleBlocks: make(chan *FilteredBlock), quit: make(chan struct{}), rescanErrChan: make(chan error), filterUpdates: make(chan filterUpdate), chainFilter: make(map[wire.OutPoint]struct{}), p2pNode: node, }, nil } // Start kicks off the FilteredChainView implementation. This function must be // called before any calls to UpdateFilter can be processed. // // NOTE: This is part of the FilteredChainView interface. func (c *CfFilteredChainView) Start() error { // Already started? if atomic.AddInt32(&c.started, 1) != 1 { return nil } log.Infof("FilteredChainView starting") // First, we'll obtain the latest block height of the p2p node. We'll // start the auto-rescan from this point. Once a caller actually wishes // to register a chain view, the rescan state will be rewound // accordingly. bestHeader, bestHeight, err := c.p2pNode.BlockHeaders.ChainTip() if err != nil { return err } startingPoint := &waddrmgr.BlockStamp{ Height: int32(bestHeight), Hash: bestHeader.BlockHash(), } // Next, we'll create our set of rescan options. Currently it's // required that a user MUST set a addr/outpoint/txid when creating a // rescan. To get around this, we'll add a "zero" outpoint, that won't // actually be matched. var zeroPoint wire.OutPoint rescanOptions := []neutrino.RescanOption{ neutrino.StartBlock(startingPoint), neutrino.QuitChan(c.quit), neutrino.NotificationHandlers( btcrpcclient.NotificationHandlers{ OnFilteredBlockConnected: c.onFilteredBlockConnected, OnFilteredBlockDisconnected: c.onFilteredBlockDisconnected, }, ), neutrino.WatchOutPoints(zeroPoint), } // Finally, we'll create our rescan struct, start it, and launch all // the goroutines we need to operate this FilteredChainView instance. c.chainView = c.p2pNode.NewRescan(rescanOptions...) c.rescanErrChan = c.chainView.Start() c.wg.Add(1) go c.chainFilterer() return nil } // Stop signals all active goroutines for a graceful shutdown. // // NOTE: This is part of the FilteredChainView interface. func (c *CfFilteredChainView) Stop() error { // Already shutting down? if atomic.AddInt32(&c.stopped, 1) != 1 { return nil } log.Infof("FilteredChainView stopping") close(c.quit) c.wg.Wait() return nil } // onFilteredBlockConnected is called for each block that's connected to the // end of the main chain. Based on our current chain filter, the block may or // may not include any relevant transactions. func (c *CfFilteredChainView) onFilteredBlockConnected(height int32, header *wire.BlockHeader, txns []*btcutil.Tx) { mtxs := make([]*wire.MsgTx, len(txns)) for i, tx := range txns { mtx := tx.MsgTx() mtxs[i] = mtx for _, txIn := range mtx.TxIn { c.filterMtx.Lock() delete(c.chainFilter, txIn.PreviousOutPoint) c.filterMtx.Unlock() } } go func() { c.newBlocks <- &FilteredBlock{ Hash: header.BlockHash(), Height: uint32(height), Transactions: mtxs, } }() } // onFilteredBlockDisconnected is a callback which is executed once a block is // disconnected from the end of the main chain. func (c *CfFilteredChainView) onFilteredBlockDisconnected(height int32, header *wire.BlockHeader) { go func() { c.staleBlocks <- &FilteredBlock{ Hash: header.BlockHash(), Height: uint32(height), } }() } // chainFilterer is the primary coordination goroutine within the // CfFilteredChainView. This goroutine handles errors from the running rescan, // and also filter updates. func (c *CfFilteredChainView) chainFilterer() { defer c.wg.Done() for { select { case err := <-c.rescanErrChan: log.Errorf("Error encountered during rescan: %v", err) // We've received a new update to the filter from the caller to // mutate their established chain view. case update := <-c.filterUpdates: log.Debugf("Updating chain filter with new UTXO's: %v", update.newUtxos) // First, we'll update the current chain view, by // adding any new UTXO's, ignoring duplicates int he // process. c.filterMtx.Lock() for _, op := range update.newUtxos { c.chainFilter[op] = struct{}{} } c.filterMtx.Unlock() // With our internal chain view update, we'll craft a // new update to the chainView which includes our new // UTXO's, and current update height. rescanUpdate := []neutrino.UpdateOption{ neutrino.AddOutPoints(update.newUtxos...), neutrino.Rewind(update.updateHeight), } err := c.chainView.Update(rescanUpdate...) if err != nil { log.Errorf("unable to update rescan: %v", err) } if update.done != nil { close(update.done) } case <-c.quit: return } } } // FilterBlock takes a block hash, and returns a FilteredBlocks which is the // result of applying the current registered UTXO sub-set on the block // corresponding to that block hash. If any watched UTXO's are spent by the // selected lock, then the internal chainFilter will also be updated. // // NOTE: This is part of the FilteredChainView interface. func (c *CfFilteredChainView) FilterBlock(blockHash *chainhash.Hash) (*FilteredBlock, error) { // First, we'll fetch the block header itself so we can obtain the // height which is part of our return value. _, blockHeight, err := c.p2pNode.BlockHeaders.FetchHeader(blockHash) if err != nil { return nil, err } filteredBlock := &FilteredBlock{ Hash: *blockHash, Height: blockHeight, } // If we don't have any items within our current chain filter, then we // can exit early as we don't need to fetch the filter. c.filterMtx.RLock() if len(c.chainFilter) == 0 { c.filterMtx.RUnlock() return filteredBlock, nil } c.filterMtx.RUnlock() // Next, using the block, hash, we'll fetch the compact filter for this // block. We only require the regular filter as we're just looking for // outpoint that have been spent. filter, err := c.p2pNode.GetCFilter(*blockHash, false) if err != nil { return nil, err } // Before we can match the filter, we'll need to map each item in our // chain filter to the representation that included in the compact // filters. c.filterMtx.RLock() relevantPoints := make([][]byte, 0, len(c.chainFilter)) for op := range c.chainFilter { opBytes := builder.OutPointToFilterEntry(op) relevantPoints = append(relevantPoints, opBytes) } c.filterMtx.RUnlock() // With our relevant points constructed, we can finally match against // the retrieved filter. matched, err := filter.MatchAny(builder.DeriveKey(blockHash), relevantPoints) if err != nil { return nil, err } // If there wasn't a match, then we'll return the filtered block as is // (void of any transactions). if !matched { return filteredBlock, nil } // If we reach this point, then there was a match, so we'll need to // fetch the block itself so we can scan it for any actual matches (as // there's a fp rate). block, err := c.p2pNode.GetBlockFromNetwork(*blockHash) if err != nil { return nil, err } // Finally, we'll step through the block, input by input, to see if any // transactions spend any outputs from our watched sub-set of the UTXO // set. for _, tx := range block.Transactions() { for _, txIn := range tx.MsgTx().TxIn { prevOp := txIn.PreviousOutPoint c.filterMtx.RLock() _, ok := c.chainFilter[prevOp] c.filterMtx.RUnlock() if ok { filteredBlock.Transactions = append( filteredBlock.Transactions, tx.MsgTx(), ) c.filterMtx.Lock() delete(c.chainFilter, prevOp) c.filterMtx.Unlock() break } } } return filteredBlock, nil } // UpdateFilter updates the UTXO filter which is to be consulted when creating // FilteredBlocks to be sent to subscribed clients. This method is cumulative // meaning repeated calls to this method should _expand_ the size of the UTXO // sub-set currently being watched. If the set updateHeight is _lower_ than // the best known height of the implementation, then the state should be // rewound to ensure all relevant notifications are dispatched. // // NOTE: This is part of the FilteredChainView interface. func (c *CfFilteredChainView) UpdateFilter(ops []wire.OutPoint, updateHeight uint32) error { doneChan := make(chan struct{}) update := filterUpdate{ newUtxos: ops, updateHeight: updateHeight, done: doneChan, } select { case c.filterUpdates <- update: case <-c.quit: return fmt.Errorf("chain filter shutting down") } select { case <-doneChan: return nil case <-c.quit: return fmt.Errorf("chain filter shutting down") } } // FilteredBlocks returns the channel that filtered blocks are to be sent over. // Each time a block is connected to the end of a main chain, and appropriate // FilteredBlock which contains the transactions which mutate our watched UTXO // set is to be returned. // // NOTE: This is part of the FilteredChainView interface. func (c *CfFilteredChainView) FilteredBlocks() <-chan *FilteredBlock { return c.newBlocks } // DisconnectedBlocks returns a receive only channel which will be sent upon // with the empty filtered blocks of blocks which are disconnected from the // main chain in the case of a re-org. // // NOTE: This is part of the FilteredChainView interface. func (c *CfFilteredChainView) DisconnectedBlocks() <-chan *FilteredBlock { return c.staleBlocks }