package routing import ( "container/heap" "math" "github.com/coreos/bbolt" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/routing/route" ) const ( // HopLimit is the maximum number hops that is permissible as a route. // Any potential paths found that lie above this limit will be rejected // with an error. This value is computed using the current fixed-size // packet length of the Sphinx construction. HopLimit = 20 // infinity is used as a starting distance in our shortest path search. infinity = math.MaxInt64 // RiskFactorBillionths controls the influence of time lock delta // of a channel on route selection. It is expressed as billionths // of msat per msat sent through the channel per time lock delta // block. See edgeWeight function below for more details. // The chosen value is based on the previous incorrect weight function // 1 + timelock + fee * fee. In this function, the fee penalty // diminishes the time lock penalty for all but the smallest amounts. // To not change the behaviour of path finding too drastically, a // relatively small value is chosen which is still big enough to give // some effect with smaller time lock values. The value may need // tweaking and/or be made configurable in the future. RiskFactorBillionths = 15 ) // pathFinder defines the interface of a path finding algorithm. type pathFinder = func(g *graphParams, r *RestrictParams, source, target route.Vertex, amt lnwire.MilliSatoshi) ( []*channeldb.ChannelEdgePolicy, error) // edgePolicyWithSource is a helper struct to keep track of the source node // of a channel edge. ChannelEdgePolicy only contains to destination node // of the edge. type edgePolicyWithSource struct { sourceNode *channeldb.LightningNode edge *channeldb.ChannelEdgePolicy } // computeFee computes the fee to forward an HTLC of `amt` milli-satoshis over // the passed active payment channel. This value is currently computed as // specified in BOLT07, but will likely change in the near future. func computeFee(amt lnwire.MilliSatoshi, edge *channeldb.ChannelEdgePolicy) lnwire.MilliSatoshi { return edge.FeeBaseMSat + (amt*edge.FeeProportionalMillionths)/1000000 } // isSamePath returns true if path1 and path2 travel through the exact same // edges, and false otherwise. func isSamePath(path1, path2 []*channeldb.ChannelEdgePolicy) bool { if len(path1) != len(path2) { return false } for i := 0; i < len(path1); i++ { if path1[i].ChannelID != path2[i].ChannelID { return false } } return true } // newRoute returns a fully valid route between the source and target that's // capable of supporting a payment of `amtToSend` after fees are fully // computed. If the route is too long, or the selected path cannot support the // fully payment including fees, then a non-nil error is returned. // // NOTE: The passed slice of ChannelHops MUST be sorted in forward order: from // the source to the target node of the path finding attempt. func newRoute(amtToSend lnwire.MilliSatoshi, sourceVertex route.Vertex, pathEdges []*channeldb.ChannelEdgePolicy, currentHeight uint32, finalCLTVDelta uint16) (*route.Route, error) { var ( hops []*route.Hop // totalTimeLock will accumulate the cumulative time lock // across the entire route. This value represents how long the // sender will need to wait in the *worst* case. totalTimeLock = currentHeight // nextIncomingAmount is the amount that will need to flow into // the *next* hop. Since we're going to be walking the route // backwards below, this next hop gets closer and closer to the // sender of the payment. nextIncomingAmount lnwire.MilliSatoshi ) pathLength := len(pathEdges) for i := pathLength - 1; i >= 0; i-- { // Now we'll start to calculate the items within the per-hop // payload for the hop this edge is leading to. edge := pathEdges[i] // If this is the last hop, then the hop payload will contain // the exact amount. In BOLT #4: Onion Routing // Protocol / "Payload for the Last Node", this is detailed. amtToForward := amtToSend // Fee is not part of the hop payload, but only used for // reporting through RPC. Set to zero for the final hop. fee := lnwire.MilliSatoshi(0) // If the current hop isn't the last hop, then add enough funds // to pay for transit over the next link. if i != len(pathEdges)-1 { // The amount that the current hop needs to forward is // equal to the incoming amount of the next hop. amtToForward = nextIncomingAmount // The fee that needs to be paid to the current hop is // based on the amount that this hop needs to forward // and its policy for the outgoing channel. This policy // is stored as part of the incoming channel of // the next hop. fee = computeFee(amtToForward, pathEdges[i+1]) } // If this is the last hop, then for verification purposes, the // value of the outgoing time-lock should be _exactly_ the // absolute time out they'd expect in the HTLC. var outgoingTimeLock uint32 if i == len(pathEdges)-1 { // As this is the last hop, we'll use the specified // final CLTV delta value instead of the value from the // last link in the route. totalTimeLock += uint32(finalCLTVDelta) outgoingTimeLock = currentHeight + uint32(finalCLTVDelta) } else { // Next, increment the total timelock of the entire // route such that each hops time lock increases as we // walk backwards in the route, using the delta of the // previous hop. delta := uint32(pathEdges[i+1].TimeLockDelta) totalTimeLock += delta // Otherwise, the value of the outgoing time-lock will // be the value of the time-lock for the _outgoing_ // HTLC, so we factor in their specified grace period // (time lock delta). outgoingTimeLock = totalTimeLock - delta } // Since we're traversing the path backwards atm, we prepend // each new hop such that, the final slice of hops will be in // the forwards order. currentHop := &route.Hop{ PubKeyBytes: edge.Node.PubKeyBytes, ChannelID: edge.ChannelID, AmtToForward: amtToForward, OutgoingTimeLock: outgoingTimeLock, } hops = append([]*route.Hop{currentHop}, hops...) // Finally, we update the amount that needs to flow into the // *next* hop, which is the amount this hop needs to forward, // accounting for the fee that it takes. nextIncomingAmount = amtToForward + fee } // With the base routing data expressed as hops, build the full route newRoute, err := route.NewRouteFromHops( nextIncomingAmount, totalTimeLock, route.Vertex(sourceVertex), hops, ) if err != nil { return nil, err } return newRoute, nil } // edgeWeight computes the weight of an edge. This value is used when searching // for the shortest path within the channel graph between two nodes. Weight is // is the fee itself plus a time lock penalty added to it. This benefits // channels with shorter time lock deltas and shorter (hops) routes in general. // RiskFactor controls the influence of time lock on route selection. This is // currently a fixed value, but might be configurable in the future. func edgeWeight(lockedAmt lnwire.MilliSatoshi, fee lnwire.MilliSatoshi, timeLockDelta uint16) int64 { // timeLockPenalty is the penalty for the time lock delta of this channel. // It is controlled by RiskFactorBillionths and scales proportional // to the amount that will pass through channel. Rationale is that it if // a twice as large amount gets locked up, it is twice as bad. timeLockPenalty := int64(lockedAmt) * int64(timeLockDelta) * RiskFactorBillionths / 1000000000 return int64(fee) + timeLockPenalty } // graphParams wraps the set of graph parameters passed to findPath. type graphParams struct { // tx can be set to an existing db transaction. If not set, a new // transaction will be started. tx *bbolt.Tx // graph is the ChannelGraph to be used during path finding. graph *channeldb.ChannelGraph // additionalEdges is an optional set of edges that should be // considered during path finding, that is not already found in the // channel graph. additionalEdges map[route.Vertex][]*channeldb.ChannelEdgePolicy // bandwidthHints is an optional map from channels to bandwidths that // can be populated if the caller has a better estimate of the current // channel bandwidth than what is found in the graph. If set, it will // override the capacities and disabled flags found in the graph for // local channels when doing path finding. In particular, it should be // set to the current available sending bandwidth for active local // channels, and 0 for inactive channels. bandwidthHints map[uint64]lnwire.MilliSatoshi } // RestrictParams wraps the set of restrictions passed to findPath that the // found path must adhere to. type RestrictParams struct { // IgnoredNodes is an optional set of nodes that should be ignored if // encountered during path finding. IgnoredNodes map[route.Vertex]struct{} // IgnoredEdges is an optional set of edges that should be ignored if // encountered during path finding. IgnoredEdges map[EdgeLocator]struct{} // FeeLimit is a maximum fee amount allowed to be used on the path from // the source to the target. FeeLimit lnwire.MilliSatoshi // OutgoingChannelID is the channel that needs to be taken to the first // hop. If nil, any channel may be used. OutgoingChannelID *uint64 // CltvLimit is the maximum time lock of the route excluding the final // ctlv. After path finding is complete, the caller needs to increase // all cltv expiry heights with the required final cltv delta. CltvLimit *uint32 } // findPath attempts to find a path from the source node within the // ChannelGraph to the target node that's capable of supporting a payment of // `amt` value. The current approach implemented is modified version of // Dijkstra's algorithm to find a single shortest path between the source node // and the destination. The distance metric used for edges is related to the // time-lock+fee costs along a particular edge. If a path is found, this // function returns a slice of ChannelHop structs which encoded the chosen path // from the target to the source. The search is performed backwards from // destination node back to source. This is to properly accumulate fees // that need to be paid along the path and accurately check the amount // to forward at every node against the available bandwidth. func findPath(g *graphParams, r *RestrictParams, source, target route.Vertex, amt lnwire.MilliSatoshi) ([]*channeldb.ChannelEdgePolicy, error) { var err error tx := g.tx if tx == nil { tx, err = g.graph.Database().Begin(false) if err != nil { return nil, err } defer tx.Rollback() } // First we'll initialize an empty heap which'll help us to quickly // locate the next edge we should visit next during our graph // traversal. var nodeHeap distanceHeap // For each node in the graph, we create an entry in the distance map // for the node set with a distance of "infinity". graph.ForEachNode // also returns the source node, so there is no need to add the source // node explicitly. distance := make(map[route.Vertex]nodeWithDist) if err := g.graph.ForEachNode(tx, func(_ *bbolt.Tx, node *channeldb.LightningNode) error { // TODO(roasbeef): with larger graph can just use disk seeks // with a visited map distance[route.Vertex(node.PubKeyBytes)] = nodeWithDist{ dist: infinity, node: node, } return nil }); err != nil { return nil, err } additionalEdgesWithSrc := make(map[route.Vertex][]*edgePolicyWithSource) for vertex, outgoingEdgePolicies := range g.additionalEdges { // We'll also include all the nodes found within the additional // edges that are not known to us yet in the distance map. node := &channeldb.LightningNode{PubKeyBytes: vertex} distance[vertex] = nodeWithDist{ dist: infinity, node: node, } // Build reverse lookup to find incoming edges. Needed because // search is taken place from target to source. for _, outgoingEdgePolicy := range outgoingEdgePolicies { toVertex := outgoingEdgePolicy.Node.PubKeyBytes incomingEdgePolicy := &edgePolicyWithSource{ sourceNode: node, edge: outgoingEdgePolicy, } additionalEdgesWithSrc[toVertex] = append(additionalEdgesWithSrc[toVertex], incomingEdgePolicy) } } // We can't always assume that the end destination is publicly // advertised to the network and included in the graph.ForEachNode call // above, so we'll manually include the target node. The target node // charges no fee. Distance is set to 0, because this is the starting // point of the graph traversal. We are searching backwards to get the // fees first time right and correctly match channel bandwidth. targetNode := &channeldb.LightningNode{PubKeyBytes: target} distance[target] = nodeWithDist{ dist: 0, node: targetNode, amountToReceive: amt, fee: 0, incomingCltv: 0, } // We'll use this map as a series of "next" hop pointers. So to get // from `Vertex` to the target node, we'll take the edge that it's // mapped to within `next`. next := make(map[route.Vertex]*channeldb.ChannelEdgePolicy) ignoredEdges := r.IgnoredEdges if ignoredEdges == nil { ignoredEdges = make(map[EdgeLocator]struct{}) } ignoredNodes := r.IgnoredNodes if ignoredNodes == nil { ignoredNodes = make(map[route.Vertex]struct{}) } // processEdge is a helper closure that will be used to make sure edges // satisfy our specific requirements. processEdge := func(fromNode *channeldb.LightningNode, edge *channeldb.ChannelEdgePolicy, bandwidth lnwire.MilliSatoshi, toNode route.Vertex) { fromVertex := route.Vertex(fromNode.PubKeyBytes) // If this is not a local channel and it is disabled, we will // skip it. // TODO(halseth): also ignore disable flags for non-local // channels if bandwidth hint is set? isSourceChan := fromVertex == source edgeFlags := edge.ChannelFlags isDisabled := edgeFlags&lnwire.ChanUpdateDisabled != 0 if !isSourceChan && isDisabled { return } // If we have an outgoing channel restriction and this is not // the specified channel, skip it. if isSourceChan && r.OutgoingChannelID != nil && *r.OutgoingChannelID != edge.ChannelID { return } // If this vertex or edge has been black listed, then we'll // skip exploring this edge. if _, ok := ignoredNodes[fromVertex]; ok { return } locator := newEdgeLocator(edge) if _, ok := ignoredEdges[*locator]; ok { return } toNodeDist := distance[toNode] amountToSend := toNodeDist.amountToReceive // If the estimated bandwidth of the channel edge is not able // to carry the amount that needs to be send, return. if bandwidth < amountToSend { return } // If the amountToSend is less than the minimum required // amount, return. if amountToSend < edge.MinHTLC { return } // If this edge was constructed from a hop hint, we won't have access to // its max HTLC. Therefore, only consider discarding this edge here if // the field is set. if edge.MaxHTLC != 0 && edge.MaxHTLC < amountToSend { return } // Compute fee that fromNode is charging. It is based on the // amount that needs to be sent to the next node in the route. // // Source node has no predecessor to pay a fee. Therefore set // fee to zero, because it should not be included in the fee // limit check and edge weight. // // Also determine the time lock delta that will be added to the // route if fromNode is selected. If fromNode is the source // node, no additional timelock is required. var fee lnwire.MilliSatoshi var timeLockDelta uint16 if fromVertex != source { fee = computeFee(amountToSend, edge) timeLockDelta = edge.TimeLockDelta } incomingCltv := toNodeDist.incomingCltv + uint32(timeLockDelta) // Check that we have cltv limit and that we are within it. if r.CltvLimit != nil && incomingCltv > *r.CltvLimit { return } // amountToReceive is the amount that the node that is added to // the distance map needs to receive from a (to be found) // previous node in the route. That previous node will need to // pay the amount that this node forwards plus the fee it // charges. amountToReceive := amountToSend + fee // Check if accumulated fees would exceed fee limit when this // node would be added to the path. totalFee := amountToReceive - amt if totalFee > r.FeeLimit { return } // By adding fromNode in the route, there will be an extra // weight composed of the fee that this node will charge and // the amount that will be locked for timeLockDelta blocks in // the HTLC that is handed out to fromNode. weight := edgeWeight(amountToReceive, fee, timeLockDelta) // Compute the tentative distance to this new channel/edge // which is the distance from our toNode to the target node // plus the weight of this edge. tempDist := toNodeDist.dist + weight // If this new tentative distance is not better than the current // best known distance to this node, return. if tempDist >= distance[fromVertex].dist { return } // Every edge should have a positive time lock delta. If we // encounter a zero delta, log a warning line. if edge.TimeLockDelta == 0 { log.Warnf("Channel %v has zero cltv delta", edge.ChannelID) } // All conditions are met and this new tentative distance is // better than the current best known distance to this node. // The new better distance is recorded, and also our "next hop" // map is populated with this edge. distance[fromVertex] = nodeWithDist{ dist: tempDist, node: fromNode, amountToReceive: amountToReceive, fee: fee, incomingCltv: incomingCltv, } next[fromVertex] = edge // Add this new node to our heap as we'd like to further // explore backwards through this edge. heap.Push(&nodeHeap, distance[fromVertex]) } // TODO(roasbeef): also add path caching // * similar to route caching, but doesn't factor in the amount // To start, our target node will the sole item within our distance // heap. heap.Push(&nodeHeap, distance[target]) for nodeHeap.Len() != 0 { // Fetch the node within the smallest distance from our source // from the heap. partialPath := heap.Pop(&nodeHeap).(nodeWithDist) bestNode := partialPath.node // If we've reached our source (or we don't have any incoming // edges), then we're done here and can exit the graph // traversal early. if bestNode.PubKeyBytes == source { break } // Now that we've found the next potential step to take we'll // examine all the incoming edges (channels) from this node to // further our graph traversal. pivot := route.Vertex(bestNode.PubKeyBytes) err := bestNode.ForEachChannel(tx, func(tx *bbolt.Tx, edgeInfo *channeldb.ChannelEdgeInfo, _, inEdge *channeldb.ChannelEdgePolicy) error { // If there is no edge policy for this candidate // node, skip. Note that we are searching backwards // so this node would have come prior to the pivot // node in the route. if inEdge == nil { return nil } // We'll query the lower layer to see if we can obtain // any more up to date information concerning the // bandwidth of this edge. edgeBandwidth, ok := g.bandwidthHints[edgeInfo.ChannelID] if !ok { // If we don't have a hint for this edge, then // we'll just use the known Capacity/MaxHTLC as // the available bandwidth. It's possible for // the capacity to be unknown when operating // under a light client. edgeBandwidth = inEdge.MaxHTLC if edgeBandwidth == 0 { edgeBandwidth = lnwire.NewMSatFromSatoshis( edgeInfo.Capacity, ) } } // Before we can process the edge, we'll need to fetch // the node on the _other_ end of this channel as we // may later need to iterate over the incoming edges of // this node if we explore it further. channelSource, err := edgeInfo.FetchOtherNode( tx, pivot[:], ) if err != nil { return err } // Check if this candidate node is better than what we // already have. processEdge(channelSource, inEdge, edgeBandwidth, pivot) return nil }) if err != nil { return nil, err } // Then, we'll examine all the additional edges from the node // we're currently visiting. Since we don't know the capacity // of the private channel, we'll assume it was selected as a // routing hint due to having enough capacity for the payment // and use the payment amount as its capacity. bandWidth := partialPath.amountToReceive for _, reverseEdge := range additionalEdgesWithSrc[bestNode.PubKeyBytes] { processEdge(reverseEdge.sourceNode, reverseEdge.edge, bandWidth, pivot) } } // If the source node isn't found in the next hop map, then a path // doesn't exist, so we terminate in an error. if _, ok := next[source]; !ok { return nil, newErrf(ErrNoPathFound, "unable to find a path to "+ "destination") } // Use the nextHop map to unravel the forward path from source to // target. pathEdges := make([]*channeldb.ChannelEdgePolicy, 0, len(next)) currentNode := source for currentNode != target { // TODO(roasbeef): assumes no cycles // Determine the next hop forward using the next map. nextNode := next[currentNode] // Add the next hop to the list of path edges. pathEdges = append(pathEdges, nextNode) // Advance current node. currentNode = route.Vertex(nextNode.Node.PubKeyBytes) } // The route is invalid if it spans more than 20 hops. The current // Sphinx (onion routing) implementation can only encode up to 20 hops // as the entire packet is fixed size. If this route is more than 20 // hops, then it's invalid. numEdges := len(pathEdges) if numEdges > HopLimit { return nil, newErr(ErrMaxHopsExceeded, "potential path has "+ "too many hops") } return pathEdges, nil }