package htlcswitch import ( "bytes" "fmt" "sync" "sync/atomic" "time" "crypto/sha256" "github.com/coreos/bbolt" "github.com/davecgh/go-spew/spew" "github.com/roasbeef/btcd/btcec" "github.com/go-errors/errors" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/contractcourt" "github.com/lightningnetwork/lnd/lnrpc" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcutil" ) var ( // ErrChannelLinkNotFound is used when channel link hasn't been found. ErrChannelLinkNotFound = errors.New("channel link not found") // ErrDuplicateAdd signals that the ADD htlc was already forwarded // through the switch and is locked into another commitment txn. ErrDuplicateAdd = errors.New("duplicate add HTLC detected") // ErrIncompleteForward is used when an htlc was already forwarded // through the switch, but did not get locked into another commitment // txn. ErrIncompleteForward = errors.Errorf("incomplete forward detected") // zeroPreimage is the empty preimage which is returned when we have // some errors. zeroPreimage [sha256.Size]byte ) // pendingPayment represents the payment which made by user and waits for // updates to be received whether the payment has been rejected or proceed // successfully. type pendingPayment struct { paymentHash lnwallet.PaymentHash amount lnwire.MilliSatoshi preimage chan [sha256.Size]byte response chan *htlcPacket err chan error // deobfuscator is a serializable entity which is used if we received // an error, it deobfuscates the onion failure blob, and extracts the // exact error from it. deobfuscator ErrorDecrypter } // plexPacket encapsulates switch packet and adds error channel to receive // error from request handler. type plexPacket struct { pkt *htlcPacket err chan error } // ChannelCloseType is an enum which signals the type of channel closure the // peer should execute. type ChannelCloseType uint8 const ( // CloseRegular indicates a regular cooperative channel closure // should be attempted. CloseRegular ChannelCloseType = iota // CloseBreach indicates that a channel breach has been detected, and // the link should immediately be marked as unavailable. CloseBreach ) // ChanClose represents a request which close a particular channel specified by // its id. type ChanClose struct { // CloseType is a variable which signals the type of channel closure the // peer should execute. CloseType ChannelCloseType // ChanPoint represent the id of the channel which should be closed. ChanPoint *wire.OutPoint // TargetFeePerKw is the ideal fee that was specified by the caller. // This value is only utilized if the closure type is CloseRegular. // This will be the starting offered fee when the fee negotiation // process for the cooperative closure transaction kicks off. TargetFeePerKw lnwallet.SatPerKWeight // Updates is used by request creator to receive the notifications about // execution of the close channel request. Updates chan *lnrpc.CloseStatusUpdate // Err is used by request creator to receive request execution error. Err chan error } // Config defines the configuration for the service. ALL elements within the // configuration MUST be non-nil for the service to carry out its duties. type Config struct { // SelfKey is the key of the backing Lightning node. This key is used // to properly craft failure messages, such that the Layer 3 router can // properly route around link./vertex failures. SelfKey *btcec.PublicKey // FwdingLog is an interface that will be used by the switch to log // forwarding events. A forwarding event happens each time a payment // circuit is successfully completed. So when we forward an HTLC, and a // settle is eventually received. FwdingLog ForwardingLog // LocalChannelClose kicks-off the workflow to execute a cooperative or // forced unilateral closure of the channel initiated by a local // subsystem. LocalChannelClose func(pubKey []byte, request *ChanClose) // DB is the channeldb instance that will be used to back the switch's // persistent circuit map. DB *channeldb.DB // SwitchPackager provides access to the forwarding packages of all // active channels. This gives the switch the ability to read arbitrary // forwarding packages, and ack settles and fails contained within them. SwitchPackager channeldb.FwdOperator // ExtractErrorEncrypter is an interface allowing switch to reextract // error encrypters stored in the circuit map on restarts, since they // are not stored directly within the database. ExtractErrorEncrypter ErrorEncrypterExtracter // FetchLastChannelUpdate retrieves the latest routing policy for a // target channel. This channel will typically be the outgoing channel // specified when we receive an incoming HTLC. This will be used to // provide payment senders our latest policy when sending encrypted // error messages. FetchLastChannelUpdate func(lnwire.ShortChannelID) (*lnwire.ChannelUpdate, error) } // Switch is the central messaging bus for all incoming/outgoing HTLCs. // Connected peers with active channels are treated as named interfaces which // refer to active channels as links. A link is the switch's message // communication point with the goroutine that manages an active channel. New // links are registered each time a channel is created, and unregistered once // the channel is closed. The switch manages the hand-off process for multi-hop // HTLCs, forwarding HTLCs initiated from within the daemon, and finally // notifies users local-systems concerning their outstanding payment requests. type Switch struct { started int32 // To be used atomically. shutdown int32 // To be used atomically. wg sync.WaitGroup quit chan struct{} // cfg is a copy of the configuration struct that the htlc switch // service was initialized with. cfg *Config // pendingPayments stores payments initiated by the user that are not yet // settled. The map is used to later look up the payments and notify the // user of the result when they are complete. Each payment is given a unique // integer ID when it is created. pendingPayments map[uint64]*pendingPayment pendingMutex sync.RWMutex paymentSequencer Sequencer // circuits is storage for payment circuits which are used to // forward the settle/fail htlc updates back to the add htlc initiator. circuits CircuitMap // mailOrchestrator manages the lifecycle of mailboxes used throughout // the switch, and facilitates delayed delivery of packets to links that // later come online. mailOrchestrator *mailOrchestrator // indexMtx is a read/write mutex that protects the set of indexes // below. indexMtx sync.RWMutex // pendingLinkIndex holds links that have not had their final, live // short_chan_id assigned. These links can be transitioned into the // primary linkIndex by using UpdateShortChanID to load their live id. pendingLinkIndex map[lnwire.ChannelID]ChannelLink // links is a map of channel id and channel link which manages // this channel. linkIndex map[lnwire.ChannelID]ChannelLink // forwardingIndex is an index which is consulted by the switch when it // needs to locate the next hop to forward an incoming/outgoing HTLC // update to/from. // // TODO(roasbeef): eventually add a NetworkHop mapping before the // ChannelLink forwardingIndex map[lnwire.ShortChannelID]ChannelLink // interfaceIndex maps the compressed public key of a peer to all the // channels that the switch maintains iwht that peer. interfaceIndex map[[33]byte]map[ChannelLink]struct{} // htlcPlex is the channel which all connected links use to coordinate // the setup/teardown of Sphinx (onion routing) payment circuits. // Active links forward any add/settle messages over this channel each // state transition, sending new adds/settles which are fully locked // in. htlcPlex chan *plexPacket // chanCloseRequests is used to transfer the channel close request to // the channel close handler. chanCloseRequests chan *ChanClose // resolutionMsgs is the channel that all external contract resolution // messages will be sent over. resolutionMsgs chan *resolutionMsg // linkControl is a channel used to propagate add/remove/get htlc // switch handler commands. linkControl chan interface{} // pendingFwdingEvents is the set of forwarding events which have been // collected during the current interval, but hasn't yet been written // to the forwarding log. fwdEventMtx sync.Mutex pendingFwdingEvents []channeldb.ForwardingEvent } // New creates the new instance of htlc switch. func New(cfg Config) (*Switch, error) { circuitMap, err := NewCircuitMap(&CircuitMapConfig{ DB: cfg.DB, ExtractErrorEncrypter: cfg.ExtractErrorEncrypter, }) if err != nil { return nil, err } sequencer, err := NewPersistentSequencer(cfg.DB) if err != nil { return nil, err } return &Switch{ cfg: &cfg, circuits: circuitMap, paymentSequencer: sequencer, linkIndex: make(map[lnwire.ChannelID]ChannelLink), mailOrchestrator: newMailOrchestrator(), forwardingIndex: make(map[lnwire.ShortChannelID]ChannelLink), interfaceIndex: make(map[[33]byte]map[ChannelLink]struct{}), pendingLinkIndex: make(map[lnwire.ChannelID]ChannelLink), pendingPayments: make(map[uint64]*pendingPayment), htlcPlex: make(chan *plexPacket), chanCloseRequests: make(chan *ChanClose), resolutionMsgs: make(chan *resolutionMsg), quit: make(chan struct{}), }, nil } // resolutionMsg is a struct that wraps an existing ResolutionMsg with a done // channel. We'll use this channel to synchronize delivery of the message with // the caller. type resolutionMsg struct { contractcourt.ResolutionMsg doneChan chan struct{} } // ProcessContractResolution is called by active contract resolvers once a // contract they are watching over has been fully resolved. The message carries // an external signal that *would* have been sent if the outgoing channel // didn't need to go to the chain in order to fulfill a contract. We'll process // this message just as if it came from an active outgoing channel. func (s *Switch) ProcessContractResolution(msg contractcourt.ResolutionMsg) error { done := make(chan struct{}) select { case s.resolutionMsgs <- &resolutionMsg{ ResolutionMsg: msg, doneChan: done, }: case <-s.quit: return fmt.Errorf("switch shutting down") } select { case <-done: case <-s.quit: return fmt.Errorf("switch shutting down") } return nil } // SendHTLC is used by other subsystems which aren't belong to htlc switch // package in order to send the htlc update. func (s *Switch) SendHTLC(nextNode [33]byte, htlc *lnwire.UpdateAddHTLC, deobfuscator ErrorDecrypter) ([sha256.Size]byte, error) { // Create payment and add to the map of payment in order later to be // able to retrieve it and return response to the user. payment := &pendingPayment{ err: make(chan error, 1), response: make(chan *htlcPacket, 1), preimage: make(chan [sha256.Size]byte, 1), paymentHash: htlc.PaymentHash, amount: htlc.Amount, deobfuscator: deobfuscator, } paymentID, err := s.paymentSequencer.NextID() if err != nil { return zeroPreimage, err } s.pendingMutex.Lock() s.pendingPayments[paymentID] = payment s.pendingMutex.Unlock() // Generate and send new update packet, if error will be received on // this stage it means that packet haven't left boundaries of our // system and something wrong happened. packet := &htlcPacket{ incomingChanID: sourceHop, incomingHTLCID: paymentID, destNode: nextNode, htlc: htlc, } if err := s.forward(packet); err != nil { s.removePendingPayment(paymentID) return zeroPreimage, err } // Returns channels so that other subsystem might wait/skip the // waiting of handling of payment. var preimage [sha256.Size]byte var response *htlcPacket select { case e := <-payment.err: err = e case <-s.quit: return zeroPreimage, errors.New("htlc switch have been stopped " + "while waiting for payment result") } select { case pkt := <-payment.response: response = pkt case <-s.quit: return zeroPreimage, errors.New("htlc switch have been stopped " + "while waiting for payment result") } select { case p := <-payment.preimage: preimage = p case <-s.quit: return zeroPreimage, errors.New("htlc switch have been stopped " + "while waiting for payment result") } // Remove circuit since we are about to complete an add/fail of this // HTLC. if teardownErr := s.teardownCircuit(response); teardownErr != nil { log.Warnf("unable to teardown circuit %s: %v", response.inKey(), teardownErr) return preimage, err } // Finally, if this response is contained in a forwarding package, ack // the settle/fail so that we don't continue to retransmit the HTLC // internally. if response.destRef != nil { if ackErr := s.ackSettleFail(*response.destRef); ackErr != nil { log.Warnf("unable to ack settle/fail reference: %s: %v", *response.destRef, ackErr) } } return preimage, err } // UpdateForwardingPolicies sends a message to the switch to update the // forwarding policies for the set of target channels. If the set of targeted // channels is nil, then the forwarding policies for all active channels with // be updated. // // NOTE: This function is synchronous and will block until either the // forwarding policies for all links have been updated, or the switch shuts // down. func (s *Switch) UpdateForwardingPolicies(newPolicy ForwardingPolicy, targetChans ...wire.OutPoint) error { log.Debugf("Updating link policies: %v", newLogClosure(func() string { return spew.Sdump(newPolicy) })) var linksToUpdate []ChannelLink s.indexMtx.RLock() // If no channels have been targeted, then we'll collect all inks to // update their policies. if len(targetChans) == 0 { for _, link := range s.linkIndex { linksToUpdate = append(linksToUpdate, link) } } else { // Otherwise, we'll only attempt to update the forwarding // policies for the set of targeted links. for _, targetLink := range targetChans { cid := lnwire.NewChanIDFromOutPoint(&targetLink) // If we can't locate a link by its converted channel // ID, then we'll return an error back to the caller. link, ok := s.linkIndex[cid] if !ok { s.indexMtx.RUnlock() return fmt.Errorf("unable to find "+ "ChannelPoint(%v) to update link "+ "policy", targetLink) } linksToUpdate = append(linksToUpdate, link) } } s.indexMtx.RUnlock() // With all the links we need to update collected, we can release the // mutex then update each link directly. for _, link := range linksToUpdate { link.UpdateForwardingPolicy(newPolicy) } return nil } // forward is used in order to find next channel link and apply htlc update. // Also this function is used by channel links itself in order to forward the // update after it has been included in the channel. func (s *Switch) forward(packet *htlcPacket) error { switch htlc := packet.htlc.(type) { case *lnwire.UpdateAddHTLC: circuit := newPaymentCircuit(&htlc.PaymentHash, packet) actions, err := s.circuits.CommitCircuits(circuit) if err != nil { log.Errorf("unable to commit circuit in switch: %v", err) return err } // Drop duplicate packet if it has already been seen. switch { case len(actions.Drops) == 1: return ErrDuplicateAdd case len(actions.Fails) == 1: if packet.incomingChanID == sourceHop { return err } var failure lnwire.FailureMessage update, err := s.cfg.FetchLastChannelUpdate( packet.incomingChanID, ) if err != nil { failure = &lnwire.FailTemporaryNodeFailure{} } else { failure = lnwire.NewTemporaryChannelFailure(update) } addErr := ErrIncompleteForward return s.failAddPacket(packet, failure, addErr) } packet.circuit = circuit } return s.route(packet) } // ForwardPackets adds a list of packets to the switch for processing. Fails // and settles are added on a first past, simultaneously constructing circuits // for any adds. After persisting the circuits, another pass of the adds is // given to forward them through the router. // // NOTE: This method guarantees that the returned err chan will eventually be // closed. The receiver should read on the channel until receiving such a // signal. func (s *Switch) ForwardPackets(packets ...*htlcPacket) chan error { var ( // fwdChan is a buffered channel used to receive err msgs from // the htlcPlex when forwarding this batch. fwdChan = make(chan error, len(packets)) // errChan is a buffered channel returned to the caller, that is // proxied by the fwdChan. This method guarantees that errChan // will be closed eventually to alert the receiver that it can // stop reading from the channel. errChan = make(chan error, len(packets)) // numSent keeps a running count of how many packets are // forwarded to the switch, which determines how many responses // we will wait for on the fwdChan.. numSent int ) // No packets, nothing to do. if len(packets) == 0 { close(errChan) return errChan } // Setup a barrier to prevent the background tasks from processing // responses until this function returns to the user. var wg sync.WaitGroup wg.Add(1) defer wg.Done() // Before spawning the following goroutine to proxy our error responses, // check to see if we have already been issued a shutdown request. If // so, we exit early to avoid incrementing the switch's waitgroup while // it is already in the process of shutting down. select { case <-s.quit: close(errChan) return errChan default: // Spawn a goroutine the proxy the errs back to the returned err // chan. This is done to ensure the err chan returned to the // caller closed properly, alerting the receiver of completion // or shutdown. s.wg.Add(1) go s.proxyFwdErrs(&numSent, &wg, fwdChan, errChan) } // Make a first pass over the packets, forwarding any settles or fails. // As adds are found, we create a circuit and append it to our set of // circuits to be written to disk. var circuits []*PaymentCircuit var addBatch []*htlcPacket for _, packet := range packets { switch htlc := packet.htlc.(type) { case *lnwire.UpdateAddHTLC: circuit := newPaymentCircuit(&htlc.PaymentHash, packet) packet.circuit = circuit circuits = append(circuits, circuit) addBatch = append(addBatch, packet) default: s.routeAsync(packet, fwdChan) numSent++ } } // If this batch did not contain any circuits to commit, we can return // early. if len(circuits) == 0 { return errChan } // Write any circuits that we found to disk. actions, err := s.circuits.CommitCircuits(circuits...) if err != nil { log.Errorf("unable to commit circuits in switch: %v", err) } // Split the htlc packets by comparing an in-order seek to the head of // the added, dropped, or failed circuits. // // NOTE: This assumes each list is guaranteed to be a subsequence of the // circuits, and that the union of the sets results in the original set // of circuits. var addedPackets, failedPackets []*htlcPacket for _, packet := range addBatch { switch { case len(actions.Adds) > 0 && packet.circuit == actions.Adds[0]: addedPackets = append(addedPackets, packet) actions.Adds = actions.Adds[1:] case len(actions.Drops) > 0 && packet.circuit == actions.Drops[0]: actions.Drops = actions.Drops[1:] case len(actions.Fails) > 0 && packet.circuit == actions.Fails[0]: failedPackets = append(failedPackets, packet) actions.Fails = actions.Fails[1:] } } // Now, forward any packets for circuits that were successfully added to // the switch's circuit map. for _, packet := range addedPackets { s.routeAsync(packet, fwdChan) numSent++ } // Lastly, for any packets that failed, this implies that they were // left in a half added state, which can happen when recovering from // failures. if len(failedPackets) > 0 { var failure lnwire.FailureMessage update, err := s.cfg.FetchLastChannelUpdate( failedPackets[0].incomingChanID, ) if err != nil { failure = &lnwire.FailTemporaryNodeFailure{} } else { failure = lnwire.NewTemporaryChannelFailure(update) } for _, packet := range failedPackets { addErr := errors.Errorf("failing packet after " + "detecting incomplete forward") // We don't handle the error here since this method // always returns an error. s.failAddPacket(packet, failure, addErr) } } return errChan } // proxyFwdErrs transmits any errors received on `fwdChan` back to `errChan`, // and guarantees that the `errChan` will be closed after 1) all errors have // been sent, or 2) the switch has received a shutdown. The `errChan` should be // buffered with at least the value of `num` after the barrier has been // released. // // NOTE: The receiver of `errChan` should read until the channel closed, since // this proxying guarantees that the close will happen. func (s *Switch) proxyFwdErrs(num *int, wg *sync.WaitGroup, fwdChan, errChan chan error) { defer s.wg.Done() defer func() { close(errChan) }() // Wait here until the outer function has finished persisting // and routing the packets. This guarantees we don't read from num until // the value is accurate. wg.Wait() numSent := *num for i := 0; i < numSent; i++ { select { case err := <-fwdChan: errChan <- err case <-s.quit: log.Errorf("unable to forward htlc packet " + "htlc switch was stopped") return } } } // route sends a single htlcPacket through the switch and synchronously awaits a // response. func (s *Switch) route(packet *htlcPacket) error { command := &plexPacket{ pkt: packet, err: make(chan error, 1), } select { case s.htlcPlex <- command: case <-s.quit: return errors.New("Htlc Switch was stopped") } select { case err := <-command.err: return err case <-s.quit: return errors.New("Htlc Switch was stopped") } } // routeAsync sends a packet through the htlc switch, using the provided err // chan to propagate errors back to the caller. This method does not wait for // a response before returning. func (s *Switch) routeAsync(packet *htlcPacket, errChan chan error) error { command := &plexPacket{ pkt: packet, err: errChan, } select { case s.htlcPlex <- command: return nil case <-s.quit: return errors.New("Htlc Switch was stopped") } } // handleLocalDispatch is used at the start/end of the htlc update life cycle. // At the start (1) it is used to send the htlc to the channel link without // creation of circuit. At the end (2) it is used to notify the user about the // result of his payment is it was successful or not. // // Alice Bob Carol // o --add----> o ---add----> o // (1) // // (2) // o <-settle-- o <--settle-- o // Alice Bob Carol // func (s *Switch) handleLocalDispatch(pkt *htlcPacket) error { // Pending payments use a special interpretation of the incomingChanID and // incomingHTLCID fields on packet where the channel ID is blank and the // HTLC ID is the payment ID. The switch basically views the users of the // node as a special channel that also offers a sequence of HTLCs. payment, err := s.findPayment(pkt.incomingHTLCID) if err != nil { return err } switch htlc := pkt.htlc.(type) { // User have created the htlc update therefore we should find the // appropriate channel link and send the payment over this link. case *lnwire.UpdateAddHTLC: // Try to find links by node destination. s.indexMtx.RLock() links, err := s.getLinks(pkt.destNode) if err != nil { s.indexMtx.RUnlock() log.Errorf("unable to find links by destination %v", err) return &ForwardingError{ ErrorSource: s.cfg.SelfKey, FailureMessage: &lnwire.FailUnknownNextPeer{}, } } s.indexMtx.RUnlock() // Try to find destination channel link with appropriate // bandwidth. var ( destination ChannelLink largestBandwidth lnwire.MilliSatoshi ) for _, link := range links { // We'll skip any links that aren't yet eligible for // forwarding. if !link.EligibleToForward() { continue } bandwidth := link.Bandwidth() if bandwidth > largestBandwidth { largestBandwidth = bandwidth } if bandwidth >= htlc.Amount { destination = link break } } // If the channel link we're attempting to forward the update // over has insufficient capacity, then we'll cancel the HTLC // as the payment cannot succeed. if destination == nil { err := fmt.Errorf("insufficient capacity in available "+ "outgoing links: need %v, max available is %v", htlc.Amount, largestBandwidth) log.Error(err) // Note that we don't need to populate an update here, // as this will go directly back to the router. htlcErr := lnwire.NewTemporaryChannelFailure(nil) return &ForwardingError{ ErrorSource: s.cfg.SelfKey, ExtraMsg: err.Error(), FailureMessage: htlcErr, } } // Send the packet to the destination channel link which // manages then channel. // // TODO(roasbeef): should return with an error pkt.outgoingChanID = destination.ShortChanID() return destination.HandleSwitchPacket(pkt) // We've just received a settle update which means we can finalize the // user payment and return successful response. case *lnwire.UpdateFulfillHTLC: // Notify the user that his payment was successfully proceed. payment.err <- nil payment.response <- pkt payment.preimage <- htlc.PaymentPreimage s.removePendingPayment(pkt.incomingHTLCID) // We've just received a fail update which means we can finalize the // user payment and return fail response. case *lnwire.UpdateFailHTLC: payment.err <- s.parseFailedPayment(payment, pkt, htlc) payment.response <- pkt payment.preimage <- zeroPreimage s.removePendingPayment(pkt.incomingHTLCID) default: return errors.New("wrong update type") } return nil } // parseFailedPayment determines the appropriate failure message to return to // a user initiated payment. The three cases handled are: // 1) A local failure, which should already plaintext. // 2) A resolution from the chain arbitrator, // 3) A failure from the remote party, which will need to be decrypted using the // payment deobfuscator. func (s *Switch) parseFailedPayment(payment *pendingPayment, pkt *htlcPacket, htlc *lnwire.UpdateFailHTLC) *ForwardingError { var failure *ForwardingError switch { // The payment never cleared the link, so we don't need to // decrypt the error, simply decode it them report back to the // user. case pkt.localFailure: var userErr string r := bytes.NewReader(htlc.Reason) failureMsg, err := lnwire.DecodeFailure(r, 0) if err != nil { userErr = fmt.Sprintf("unable to decode onion failure, "+ "htlc with hash(%x): %v", payment.paymentHash[:], err) log.Error(userErr) // As this didn't even clear the link, we don't need to // apply an update here since it goes directly to the // router. failureMsg = lnwire.NewTemporaryChannelFailure(nil) } failure = &ForwardingError{ ErrorSource: s.cfg.SelfKey, ExtraMsg: userErr, FailureMessage: failureMsg, } // A payment had to be timed out on chain before it got past // the first hop. In this case, we'll report a permanent // channel failure as this means us, or the remote party had to // go on chain. case pkt.isResolution && htlc.Reason == nil: userErr := fmt.Sprintf("payment was resolved " + "on-chain, then cancelled back") failure = &ForwardingError{ ErrorSource: s.cfg.SelfKey, ExtraMsg: userErr, FailureMessage: lnwire.FailPermanentChannelFailure{}, } // A regular multi-hop payment error that we'll need to // decrypt. default: var err error // We'll attempt to fully decrypt the onion encrypted // error. If we're unable to then we'll bail early. failure, err = payment.deobfuscator.DecryptError(htlc.Reason) if err != nil { userErr := fmt.Sprintf("unable to de-obfuscate onion failure, "+ "htlc with hash(%x): %v", payment.paymentHash[:], err) log.Error(userErr) failure = &ForwardingError{ ErrorSource: s.cfg.SelfKey, ExtraMsg: userErr, FailureMessage: lnwire.NewTemporaryChannelFailure(nil), } } } return failure } // handlePacketForward is used in cases when we need forward the htlc update // from one channel link to another and be able to propagate the settle/fail // updates back. This behaviour is achieved by creation of payment circuits. func (s *Switch) handlePacketForward(packet *htlcPacket) error { switch htlc := packet.htlc.(type) { // Channel link forwarded us a new htlc, therefore we initiate the // payment circuit within our internal state so we can properly forward // the ultimate settle message back latter. case *lnwire.UpdateAddHTLC: if packet.incomingChanID == sourceHop { // A blank incomingChanID indicates that this is // a pending user-initiated payment. return s.handleLocalDispatch(packet) } s.indexMtx.RLock() targetLink, err := s.getLinkByShortID(packet.outgoingChanID) if err != nil { s.indexMtx.RUnlock() // If packet was forwarded from another channel link // than we should notify this link that some error // occurred. failure := &lnwire.FailUnknownNextPeer{} addErr := errors.Errorf("unable to find link with "+ "destination %v", packet.outgoingChanID) return s.failAddPacket(packet, failure, addErr) } interfaceLinks, _ := s.getLinks(targetLink.Peer().PubKey()) s.indexMtx.RUnlock() // We'll keep track of any HTLC failures during the link // selection process. This way we can return the error for // precise link that the sender selected, while optimistically // trying all links to utilize our available bandwidth. linkErrs := make(map[lnwire.ShortChannelID]lnwire.FailureMessage) // Try to find destination channel link with appropriate // bandwidth. var destination ChannelLink for _, link := range interfaceLinks { // We'll skip any links that aren't yet eligible for // forwarding. switch { case !link.EligibleToForward(): continue // If the link doesn't yet have a source chan ID, then // we'll skip it as well. case link.ShortChanID() == sourceHop: continue } // Before we check the link's bandwidth, we'll ensure // that the HTLC satisfies the current forwarding // policy of this target link. err := link.HtlcSatifiesPolicy( htlc.PaymentHash, packet.incomingAmount, packet.amount, ) if err != nil { linkErrs[link.ShortChanID()] = err continue } if link.Bandwidth() >= htlc.Amount { destination = link break } } switch { // If the channel link we're attempting to forward the update // over has insufficient capacity, and didn't violate any // forwarding policies, then we'll cancel the htlc as the // payment cannot succeed. case destination == nil && len(linkErrs) == 0: // If packet was forwarded from another channel link // than we should notify this link that some error // occurred. var failure lnwire.FailureMessage update, err := s.cfg.FetchLastChannelUpdate( packet.outgoingChanID, ) if err != nil { failure = &lnwire.FailTemporaryNodeFailure{} } else { failure = lnwire.NewTemporaryChannelFailure(update) } addErr := errors.Errorf("unable to find appropriate "+ "channel link insufficient capacity, need "+ "%v", htlc.Amount) return s.failAddPacket(packet, failure, addErr) // If we had a forwarding failure due to the HTLC not // satisfying the current policy, then we'll send back an // error, but ensure we send back the error sourced at the // *target* link. case destination == nil && len(linkErrs) != 0: // At this point, some or all of the links rejected the // HTLC so we couldn't forward it. So we'll try to look // up the error that came from the source. linkErr, ok := linkErrs[packet.outgoingChanID] if !ok { // If we can't find the error of the source, // then we'll return an unknown next peer, // though this should never happen. linkErr = &lnwire.FailUnknownNextPeer{} log.Warnf("unable to find err source for "+ "outgoing_link=%v, errors=%v", packet.outgoingChanID, newLogClosure(func() string { return spew.Sdump(linkErrs) })) } addErr := fmt.Errorf("incoming HTLC(%x) violated "+ "target outgoing link (id=%v) policy: %v", htlc.PaymentHash[:], packet.outgoingChanID, linkErr) return s.failAddPacket(packet, linkErr, addErr) } // Send the packet to the destination channel link which // manages the channel. packet.outgoingChanID = destination.ShortChanID() return destination.HandleSwitchPacket(packet) case *lnwire.UpdateFailHTLC, *lnwire.UpdateFulfillHTLC: // If the source of this packet has not been set, use the // circuit map to lookup the origin. circuit, err := s.closeCircuit(packet) if err != nil { return err } fail, isFail := htlc.(*lnwire.UpdateFailHTLC) if isFail && !packet.hasSource { switch { case circuit.ErrorEncrypter == nil: // No message to encrypt, locally sourced // payment. case packet.isResolution: // If this is a resolution message, then we'll need to encrypt // it as it's actually internally sourced. var err error // TODO(roasbeef): don't need to pass actually? failure := &lnwire.FailPermanentChannelFailure{} fail.Reason, err = circuit.ErrorEncrypter.EncryptFirstHop( failure, ) if err != nil { err = errors.Errorf("unable to obfuscate "+ "error: %v", err) log.Error(err) } default: // Otherwise, it's a forwarded error, so we'll perform a // wrapper encryption as normal. fail.Reason = circuit.ErrorEncrypter.IntermediateEncrypt( fail.Reason, ) } } else if !isFail && circuit.Outgoing != nil { // If this is an HTLC settle, and it wasn't from a // locally initiated HTLC, then we'll log a forwarding // event so we can flush it to disk later. // // TODO(roasbeef): only do this once link actually // fully settles? localHTLC := packet.incomingChanID == sourceHop if !localHTLC { s.fwdEventMtx.Lock() s.pendingFwdingEvents = append( s.pendingFwdingEvents, channeldb.ForwardingEvent{ Timestamp: time.Now(), IncomingChanID: circuit.Incoming.ChanID, OutgoingChanID: circuit.Outgoing.ChanID, AmtIn: circuit.IncomingAmount, AmtOut: circuit.OutgoingAmount, }, ) s.fwdEventMtx.Unlock() } } // A blank IncomingChanID in a circuit indicates that it is a pending // user-initiated payment. if packet.incomingChanID == sourceHop { return s.handleLocalDispatch(packet) } // Check to see that the source link is online before removing // the circuit. return s.mailOrchestrator.Deliver(packet.incomingChanID, packet) default: return errors.New("wrong update type") } } // failAddPacket encrypts a fail packet back to an add packet's source. // The ciphertext will be derived from the failure message proivded by context. // This method returns the failErr if all other steps complete successfully. func (s *Switch) failAddPacket(packet *htlcPacket, failure lnwire.FailureMessage, failErr error) error { // Encrypt the failure so that the sender will be able to read the error // message. Since we failed this packet, we use EncryptFirstHop to // obfuscate the failure for their eyes only. reason, err := packet.obfuscator.EncryptFirstHop(failure) if err != nil { err := errors.Errorf("unable to obfuscate "+ "error: %v", err) log.Error(err) return err } log.Error(failErr) failPkt := &htlcPacket{ incomingChanID: packet.incomingChanID, incomingHTLCID: packet.incomingHTLCID, circuit: packet.circuit, htlc: &lnwire.UpdateFailHTLC{ Reason: reason, }, } // Route a fail packet back to the source link. err = s.mailOrchestrator.Deliver(failPkt.incomingChanID, failPkt) if err != nil { err = errors.Errorf("source chanid=%v unable to "+ "handle switch packet: %v", packet.incomingChanID, err) log.Error(err) return err } return failErr } // closeCircuit accepts a settle or fail htlc and the associated htlc packet and // attempts to determine the source that forwarded this htlc. This method will // set the incoming chan and htlc ID of the given packet if the source was // found, and will properly [re]encrypt any failure messages. func (s *Switch) closeCircuit(pkt *htlcPacket) (*PaymentCircuit, error) { // If the packet has its source, that means it was failed locally by // the outgoing link. We fail it here to make sure only one response // makes it through the switch. if pkt.hasSource { circuit, err := s.circuits.FailCircuit(pkt.inKey()) switch err { // Circuit successfully closed. case nil: return circuit, nil // Circuit was previously closed, but has not been deleted. // We'll just drop this response until the circuit has been // fully removed. case ErrCircuitClosing: return nil, err // Failed to close circuit because it does not exist. This is // likely because the circuit was already successfully closed. // Since this packet failed locally, there is no forwarding // package entry to acknowledge. case ErrUnknownCircuit: return nil, err // Unexpected error. default: return nil, err } } // Otherwise, this is packet was received from the remote party. Use // circuit map to find the incoming link to receive the settle/fail. circuit, err := s.circuits.CloseCircuit(pkt.outKey()) switch err { // Open circuit successfully closed. case nil: pkt.incomingChanID = circuit.Incoming.ChanID pkt.incomingHTLCID = circuit.Incoming.HtlcID pkt.circuit = circuit pkt.sourceRef = &circuit.AddRef pktType := "SETTLE" if _, ok := pkt.htlc.(*lnwire.UpdateFailHTLC); ok { pktType = "FAIL" } log.Debugf("Closed completed %s circuit for %x: "+ "(%s, %d) <-> (%s, %d)", pktType, pkt.circuit.PaymentHash, pkt.incomingChanID, pkt.incomingHTLCID, pkt.outgoingChanID, pkt.outgoingHTLCID) return circuit, nil // Circuit was previously closed, but has not been deleted. We'll just // drop this response until the circuit has been removed. case ErrCircuitClosing: return nil, err // Failed to close circuit because it does not exist. This is likely // because the circuit was already successfully closed. case ErrUnknownCircuit: err := errors.Errorf("Unable to find target channel "+ "for HTLC settle/fail: channel ID = %s, "+ "HTLC ID = %d", pkt.outgoingChanID, pkt.outgoingHTLCID) log.Error(err) // TODO(conner): ack settle/fail if pkt.destRef != nil { if err := s.ackSettleFail(*pkt.destRef); err != nil { return nil, err } } return nil, err // Unexpected error. default: return nil, err } } // ackSettleFail is used by the switch to ACK any settle/fail entries in the // forwarding package of the outgoing link for a payment circuit. We do this if // we're the originator of the payment, so the link stops attempting to // re-broadcast. func (s *Switch) ackSettleFail(settleFailRef channeldb.SettleFailRef) error { return s.cfg.DB.Update(func(tx *bolt.Tx) error { return s.cfg.SwitchPackager.AckSettleFails(tx, settleFailRef) }) } // teardownCircuit removes a pending or open circuit from the switch's circuit // map and prints useful logging statements regarding the outcome. func (s *Switch) teardownCircuit(pkt *htlcPacket) error { var pktType string switch htlc := pkt.htlc.(type) { case *lnwire.UpdateFulfillHTLC: pktType = "SETTLE" case *lnwire.UpdateFailHTLC: pktType = "FAIL" default: err := fmt.Errorf("cannot tear down packet of type: %T", htlc) log.Errorf(err.Error()) return err } switch { case pkt.circuit.HasKeystone(): log.Debugf("Tearing down open circuit with %s pkt, removing circuit=%v "+ "with keystone=%v", pktType, pkt.inKey(), pkt.outKey()) err := s.circuits.DeleteCircuits(pkt.inKey()) if err != nil { log.Warnf("Failed to tear down open circuit (%s, %d) <-> (%s, %d) "+ "with payment_hash-%v using %s pkt", pkt.incomingChanID, pkt.incomingHTLCID, pkt.outgoingChanID, pkt.outgoingHTLCID, pkt.circuit.PaymentHash, pktType) return err } log.Debugf("Closed completed %s circuit for %x: "+ "(%s, %d) <-> (%s, %d)", pktType, pkt.circuit.PaymentHash, pkt.incomingChanID, pkt.incomingHTLCID, pkt.outgoingChanID, pkt.outgoingHTLCID) default: log.Debugf("Tearing down incomplete circuit with %s for inkey=%v", pktType, pkt.inKey()) err := s.circuits.DeleteCircuits(pkt.inKey()) if err != nil { log.Warnf("Failed to tear down pending %s circuit for %x: "+ "(%s, %d)", pktType, pkt.circuit.PaymentHash, pkt.incomingChanID, pkt.incomingHTLCID) return err } log.Debugf("Removed pending onion circuit for %x: "+ "(%s, %d)", pkt.circuit.PaymentHash, pkt.incomingChanID, pkt.incomingHTLCID) } return nil } // CloseLink creates and sends the close channel command to the target link // directing the specified closure type. If the closure type if CloseRegular, // then the last parameter should be the ideal fee-per-kw that will be used as // a starting point for close negotiation. func (s *Switch) CloseLink(chanPoint *wire.OutPoint, closeType ChannelCloseType, targetFeePerKw lnwallet.SatPerKWeight) (chan *lnrpc.CloseStatusUpdate, chan error) { // TODO(roasbeef) abstract out the close updates. updateChan := make(chan *lnrpc.CloseStatusUpdate, 2) errChan := make(chan error, 1) command := &ChanClose{ CloseType: closeType, ChanPoint: chanPoint, Updates: updateChan, TargetFeePerKw: targetFeePerKw, Err: errChan, } select { case s.chanCloseRequests <- command: return updateChan, errChan case <-s.quit: errChan <- errors.New("unable close channel link, htlc " + "switch already stopped") close(updateChan) return updateChan, errChan } } // htlcForwarder is responsible for optimally forwarding (and possibly // fragmenting) incoming/outgoing HTLCs amongst all active interfaces and their // links. The duties of the forwarder are similar to that of a network switch, // in that it facilitates multi-hop payments by acting as a central messaging // bus. The switch communicates will active links to create, manage, and tear // down active onion routed payments. Each active channel is modeled as // networked device with metadata such as the available payment bandwidth, and // total link capacity. // // NOTE: This MUST be run as a goroutine. func (s *Switch) htlcForwarder() { defer s.wg.Done() // Remove all links once we've been signalled for shutdown. defer func() { s.indexMtx.Lock() for _, link := range s.linkIndex { if err := s.removeLink(link.ChanID()); err != nil { log.Errorf("unable to remove "+ "channel link on stop: %v", err) } } for _, link := range s.pendingLinkIndex { if err := s.removeLink(link.ChanID()); err != nil { log.Errorf("unable to remove pending "+ "channel link on stop: %v", err) } } s.indexMtx.Unlock() // Before we exit fully, we'll attempt to flush out any // forwarding events that may still be lingering since the last // batch flush. if err := s.FlushForwardingEvents(); err != nil { log.Errorf("unable to flush forwarding events: %v", err) } }() // TODO(roasbeef): cleared vs settled distinction var ( totalNumUpdates uint64 totalSatSent btcutil.Amount totalSatRecv btcutil.Amount ) logTicker := time.NewTicker(10 * time.Second) defer logTicker.Stop() // Every 15 seconds, we'll flush out the forwarding events that // occurred during that period. fwdEventTicker := time.NewTicker(15 * time.Second) defer fwdEventTicker.Stop() for { select { // A local close request has arrived, we'll forward this to the // relevant link (if it exists) so the channel can be // cooperatively closed (if possible). case req := <-s.chanCloseRequests: chanID := lnwire.NewChanIDFromOutPoint(req.ChanPoint) s.indexMtx.RLock() link, ok := s.linkIndex[chanID] if !ok { s.indexMtx.RUnlock() req.Err <- errors.Errorf("no peer for channel with "+ "chan_id=%x", chanID[:]) continue } s.indexMtx.RUnlock() peerPub := link.Peer().PubKey() log.Debugf("Requesting local channel close: peer=%v, "+ "chan_id=%x", link.Peer(), chanID[:]) go s.cfg.LocalChannelClose(peerPub[:], req) case resolutionMsg := <-s.resolutionMsgs: pkt := &htlcPacket{ outgoingChanID: resolutionMsg.SourceChan, outgoingHTLCID: resolutionMsg.HtlcIndex, isResolution: true, } // Resolution messages will either be cancelling // backwards an existing HTLC, or settling a previously // outgoing HTLC. Based on this, we'll map the message // to the proper htlcPacket. if resolutionMsg.Failure != nil { pkt.htlc = &lnwire.UpdateFailHTLC{} } else { pkt.htlc = &lnwire.UpdateFulfillHTLC{ PaymentPreimage: *resolutionMsg.PreImage, } } log.Infof("Received outside contract resolution, "+ "mapping to: %v", spew.Sdump(pkt)) // We don't check the error, as the only failure we can // encounter is due to the circuit already being // closed. This is fine, as processing this message is // meant to be idempotent. err := s.handlePacketForward(pkt) if err != nil { log.Errorf("Unable to forward resolution msg: %v", err) } // With the message processed, we'll now close out close(resolutionMsg.doneChan) // A new packet has arrived for forwarding, we'll interpret the // packet concretely, then either forward it along, or // interpret a return packet to a locally initialized one. case cmd := <-s.htlcPlex: cmd.err <- s.handlePacketForward(cmd.pkt) // When this time ticks, then it indicates that we should // collect all the forwarding events since the last internal, // and write them out to our log. case <-fwdEventTicker.C: s.wg.Add(1) go func() { defer s.wg.Done() if err := s.FlushForwardingEvents(); err != nil { log.Errorf("unable to flush "+ "forwarding events: %v", err) } }() // The log ticker has fired, so we'll calculate some forwarding // stats for the last 10 seconds to display within the logs to // users. case <-logTicker.C: // First, we'll collate the current running tally of // our forwarding stats. prevSatSent := totalSatSent prevSatRecv := totalSatRecv prevNumUpdates := totalNumUpdates var ( newNumUpdates uint64 newSatSent btcutil.Amount newSatRecv btcutil.Amount ) // Next, we'll run through all the registered links and // compute their up-to-date forwarding stats. s.indexMtx.RLock() for _, link := range s.linkIndex { // TODO(roasbeef): when links first registered // stats printed. updates, sent, recv := link.Stats() newNumUpdates += updates newSatSent += sent.ToSatoshis() newSatRecv += recv.ToSatoshis() } s.indexMtx.RUnlock() var ( diffNumUpdates uint64 diffSatSent btcutil.Amount diffSatRecv btcutil.Amount ) // If this is the first time we're computing these // stats, then the diff is just the new value. We do // this in order to avoid integer underflow issues. if prevNumUpdates == 0 { diffNumUpdates = newNumUpdates diffSatSent = newSatSent diffSatRecv = newSatRecv } else { diffNumUpdates = newNumUpdates - prevNumUpdates diffSatSent = newSatSent - prevSatSent diffSatRecv = newSatRecv - prevSatRecv } // If the diff of num updates is zero, then we haven't // forwarded anything in the last 10 seconds, so we can // skip this update. if diffNumUpdates == 0 { continue } // If the diff of num updates is negative, then some // links may have been unregistered from the switch, so // we'll update our stats to only include our registered // links. if int64(diffNumUpdates) < 0 { totalNumUpdates = newNumUpdates totalSatSent = newSatSent totalSatRecv = newSatRecv continue } // Otherwise, we'll log this diff, then accumulate the // new stats into the running total. log.Infof("Sent %d satoshis and received %d satoshis "+ "in the last 10 seconds (%f tx/sec)", diffSatSent, diffSatRecv, float64(diffNumUpdates)/10) totalNumUpdates += diffNumUpdates totalSatSent += diffSatSent totalSatRecv += diffSatRecv case <-s.quit: return } } } // Start starts all helper goroutines required for the operation of the switch. func (s *Switch) Start() error { if !atomic.CompareAndSwapInt32(&s.started, 0, 1) { log.Warn("Htlc Switch already started") return errors.New("htlc switch already started") } log.Infof("Starting HTLC Switch") s.wg.Add(1) go s.htlcForwarder() if err := s.reforwardResponses(); err != nil { s.Stop() log.Errorf("unable to reforward responses: %v", err) return err } return nil } // reforwardResponses for every known, non-pending channel, loads all associated // forwarding packages and reforwards any Settle or Fail HTLCs found. This is // used to resurrect the switch's mailboxes after a restart. func (s *Switch) reforwardResponses() error { activeChannels, err := s.cfg.DB.FetchAllOpenChannels() if err != nil { return err } for _, activeChannel := range activeChannels { shortChanID := activeChannel.ShortChanID() fwdPkgs, err := s.loadChannelFwdPkgs(shortChanID) if err != nil { return err } s.reforwardSettleFails(fwdPkgs) } return nil } // loadChannelFwdPkgs loads all forwarding packages owned by the `source` short // channel identifier. func (s *Switch) loadChannelFwdPkgs(source lnwire.ShortChannelID) ([]*channeldb.FwdPkg, error) { var fwdPkgs []*channeldb.FwdPkg if err := s.cfg.DB.Update(func(tx *bolt.Tx) error { var err error fwdPkgs, err = s.cfg.SwitchPackager.LoadChannelFwdPkgs( tx, source, ) return err }); err != nil { return nil, err } return fwdPkgs, nil } // reforwardSettleFails parses the Settle and Fail HTLCs from the list of // forwarding packages, and reforwards those that have not been acknowledged. // This is intended to occur on startup, in order to recover the switch's // mailboxes, and to ensure that responses can be propagated in case the // outgoing link never comes back online. // // NOTE: This should mimic the behavior processRemoteSettleFails. func (s *Switch) reforwardSettleFails(fwdPkgs []*channeldb.FwdPkg) { for _, fwdPkg := range fwdPkgs { settleFails := lnwallet.PayDescsFromRemoteLogUpdates( fwdPkg.Source, fwdPkg.Height, fwdPkg.SettleFails, ) switchPackets := make([]*htlcPacket, 0, len(settleFails)) for i, pd := range settleFails { // Skip any settles or fails that have already been // acknowledged by the incoming link that originated the // forwarded Add. if fwdPkg.SettleFailFilter.Contains(uint16(i)) { continue } switch pd.EntryType { // A settle for an HTLC we previously forwarded HTLC has // been received. So we'll forward the HTLC to the // switch which will handle propagating the settle to // the prior hop. case lnwallet.Settle: settlePacket := &htlcPacket{ outgoingChanID: fwdPkg.Source, outgoingHTLCID: pd.ParentIndex, destRef: pd.DestRef, htlc: &lnwire.UpdateFulfillHTLC{ PaymentPreimage: pd.RPreimage, }, } // Add the packet to the batch to be forwarded, and // notify the overflow queue that a spare spot has been // freed up within the commitment state. switchPackets = append(switchPackets, settlePacket) // A failureCode message for a previously forwarded HTLC has been // received. As a result a new slot will be freed up in our // commitment state, so we'll forward this to the switch so the // backwards undo can continue. case lnwallet.Fail: // Fetch the reason the HTLC was cancelled so we can // continue to propagate it. failPacket := &htlcPacket{ outgoingChanID: fwdPkg.Source, outgoingHTLCID: pd.ParentIndex, destRef: pd.DestRef, htlc: &lnwire.UpdateFailHTLC{ Reason: lnwire.OpaqueReason(pd.FailReason), }, } // Add the packet to the batch to be forwarded, and // notify the overflow queue that a spare spot has been // freed up within the commitment state. switchPackets = append(switchPackets, failPacket) } } errChan := s.ForwardPackets(switchPackets...) go handleBatchFwdErrs(errChan) } } // handleBatchFwdErrs waits on the given errChan until it is closed, logging the // errors returned from any unsuccessful forwarding attempts. func handleBatchFwdErrs(errChan chan error) { for { err, ok := <-errChan if !ok { // Err chan has been drained or switch is shutting down. // Either way, return. return } if err == nil { continue } log.Errorf("unhandled error while reforwarding htlc "+ "settle/fail over htlcswitch: %v", err) } } // Stop gracefully stops all active helper goroutines, then waits until they've // exited. func (s *Switch) Stop() error { if !atomic.CompareAndSwapInt32(&s.shutdown, 0, 1) { log.Warn("Htlc Switch already stopped") return errors.New("htlc switch already shutdown") } log.Infof("HTLC Switch shutting down") close(s.quit) s.wg.Wait() // Wait until all active goroutines have finished exiting before // stopping the mailboxes, otherwise the mailbox map could still be // accessed and modified. s.mailOrchestrator.Stop() return nil } // AddLink is used to initiate the handling of the add link command. The // request will be propagated and handled in the main goroutine. func (s *Switch) AddLink(link ChannelLink) error { s.indexMtx.Lock() defer s.indexMtx.Unlock() chanID := link.ChanID() // First, ensure that this link is not already active in the switch. _, err := s.getLink(chanID) if err == nil { return fmt.Errorf("unable to add ChannelLink(%v), already "+ "active", chanID) } // Get and attach the mailbox for this link, which buffers packets in // case there packets that we tried to deliver while this link was // offline. mailbox := s.mailOrchestrator.GetOrCreateMailBox(chanID) link.AttachMailBox(mailbox) if err := link.Start(); err != nil { s.removeLink(chanID) return err } shortChanID := link.ShortChanID() if shortChanID == sourceHop { log.Infof("Adding pending link chan_id=%v, short_chan_id=%v", chanID, shortChanID) s.pendingLinkIndex[chanID] = link } else { log.Infof("Adding live link chan_id=%v, short_chan_id=%v", chanID, shortChanID) s.addLiveLink(link) s.mailOrchestrator.BindLiveShortChanID( mailbox, chanID, shortChanID, ) } return nil } // addLiveLink adds a link to all associated forwarding index, this makes it a // candidate for forwarding HTLCs. func (s *Switch) addLiveLink(link ChannelLink) { // We'll add the link to the linkIndex which lets us quickly // look up a channel when we need to close or register it, and // the forwarding index which'll be used when forwarding HTLC's // in the multi-hop setting. s.linkIndex[link.ChanID()] = link s.forwardingIndex[link.ShortChanID()] = link // Next we'll add the link to the interface index so we can // quickly look up all the channels for a particular node. peerPub := link.Peer().PubKey() if _, ok := s.interfaceIndex[peerPub]; !ok { s.interfaceIndex[peerPub] = make(map[ChannelLink]struct{}) } s.interfaceIndex[peerPub][link] = struct{}{} } // GetLink is used to initiate the handling of the get link command. The // request will be propagated/handled to/in the main goroutine. func (s *Switch) GetLink(chanID lnwire.ChannelID) (ChannelLink, error) { s.indexMtx.RLock() defer s.indexMtx.RUnlock() return s.getLink(chanID) } // getLink returns the link stored in either the pending index or the live // lindex. func (s *Switch) getLink(chanID lnwire.ChannelID) (ChannelLink, error) { link, ok := s.linkIndex[chanID] if !ok { link, ok = s.pendingLinkIndex[chanID] if !ok { return nil, ErrChannelLinkNotFound } } return link, nil } // getLinkByShortID attempts to return the link which possesses the target // short channel ID. // // NOTE: This MUST be called with the indexMtx held. func (s *Switch) getLinkByShortID(chanID lnwire.ShortChannelID) (ChannelLink, error) { link, ok := s.forwardingIndex[chanID] if !ok { return nil, ErrChannelLinkNotFound } return link, nil } // RemoveLink is used to initiate the handling of the remove link command. The // request will be propagated/handled to/in the main goroutine. func (s *Switch) RemoveLink(chanID lnwire.ChannelID) error { s.indexMtx.Lock() defer s.indexMtx.Unlock() return s.removeLink(chanID) } // removeLink is used to remove and stop the channel link. // // NOTE: This MUST be called with the indexMtx held. func (s *Switch) removeLink(chanID lnwire.ChannelID) error { log.Infof("Removing channel link with ChannelID(%v)", chanID) link, err := s.getLink(chanID) if err != nil { return err } // Remove the channel from live link indexes. delete(s.pendingLinkIndex, link.ChanID()) delete(s.linkIndex, link.ChanID()) delete(s.forwardingIndex, link.ShortChanID()) // Remove the channel from channel index. peerPub := link.Peer().PubKey() delete(s.interfaceIndex, peerPub) link.Stop() return nil } // UpdateShortChanID updates the short chan ID for an existing channel. This is // required in the case of a re-org and re-confirmation or a channel, or in the // case that a link was added to the switch before its short chan ID was known. func (s *Switch) UpdateShortChanID(chanID lnwire.ChannelID) error { s.indexMtx.Lock() defer s.indexMtx.Unlock() // Locate the target link in the pending link index. If no such link // exists, then we will ignore the request. link, ok := s.pendingLinkIndex[chanID] if !ok { return fmt.Errorf("link %v not found", chanID) } oldShortChanID := link.ShortChanID() // Try to update the link's short channel ID, returning early if this // update failed. shortChanID, err := link.UpdateShortChanID() if err != nil { return err } // Reject any blank short channel ids. if shortChanID == sourceHop { return fmt.Errorf("refusing trivial short_chan_id for chan_id=%v"+ "live link", chanID) } log.Infof("Updated short_chan_id for ChannelLink(%v): old=%v, new=%v", chanID, oldShortChanID, shortChanID) // Since the link was in the pending state before, we will remove it // from the pending link index and add it to the live link index so that // it can be available in forwarding. delete(s.pendingLinkIndex, chanID) s.addLiveLink(link) // Finally, alert the mail orchestrator to the change of short channel // ID, and deliver any unclaimed packets to the link. mailbox := s.mailOrchestrator.GetOrCreateMailBox(chanID) s.mailOrchestrator.BindLiveShortChanID( mailbox, chanID, shortChanID, ) return nil } // GetLinksByInterface fetches all the links connected to a particular node // identified by the serialized compressed form of its public key. func (s *Switch) GetLinksByInterface(hop [33]byte) ([]ChannelLink, error) { s.indexMtx.RLock() defer s.indexMtx.RUnlock() return s.getLinks(hop) } // getLinks is function which returns the channel links of the peer by hop // destination id. // // NOTE: This MUST be called with the indexMtx held. func (s *Switch) getLinks(destination [33]byte) ([]ChannelLink, error) { links, ok := s.interfaceIndex[destination] if !ok { return nil, errors.Errorf("unable to locate channel link by "+ "destination hop id %x", destination) } channelLinks := make([]ChannelLink, 0, len(links)) for link := range links { channelLinks = append(channelLinks, link) } return channelLinks, nil } // removePendingPayment is the helper function which removes the pending user // payment. func (s *Switch) removePendingPayment(paymentID uint64) error { s.pendingMutex.Lock() defer s.pendingMutex.Unlock() if _, ok := s.pendingPayments[paymentID]; !ok { return errors.Errorf("Cannot find pending payment with ID %d", paymentID) } delete(s.pendingPayments, paymentID) return nil } // findPayment is the helper function which find the payment. func (s *Switch) findPayment(paymentID uint64) (*pendingPayment, error) { s.pendingMutex.RLock() defer s.pendingMutex.RUnlock() payment, ok := s.pendingPayments[paymentID] if !ok { return nil, errors.Errorf("Cannot find pending payment with ID %d", paymentID) } return payment, nil } // CircuitModifier returns a reference to subset of the interfaces provided by // the circuit map, to allow links to open and close circuits. func (s *Switch) CircuitModifier() CircuitModifier { return s.circuits } // numPendingPayments is helper function which returns the overall number of // pending user payments. func (s *Switch) numPendingPayments() int { return len(s.pendingPayments) } // commitCircuits persistently adds a circuit to the switch's circuit map. func (s *Switch) commitCircuits(circuits ...*PaymentCircuit) ( *CircuitFwdActions, error) { return s.circuits.CommitCircuits(circuits...) } // openCircuits preemptively writes the keystones for Adds that are about to be // added to a commitment txn. func (s *Switch) openCircuits(keystones ...Keystone) error { return s.circuits.OpenCircuits(keystones...) } // deleteCircuits persistently removes the circuit, and keystone if present, // from the circuit map. func (s *Switch) deleteCircuits(inKeys ...CircuitKey) error { return s.circuits.DeleteCircuits(inKeys...) } // lookupCircuit queries the in memory representation of the circuit map to // retrieve a particular circuit. func (s *Switch) lookupCircuit(inKey CircuitKey) *PaymentCircuit { return s.circuits.LookupCircuit(inKey) } // lookupOpenCircuit queries the in-memory representation of the circuit map for a // circuit whose outgoing circuit key matches outKey. func (s *Switch) lookupOpenCircuit(outKey CircuitKey) *PaymentCircuit { return s.circuits.LookupOpenCircuit(outKey) } // FlushForwardingEvents flushes out the set of pending forwarding events to // the persistent log. This will be used by the switch to periodically flush // out the set of forwarding events to disk. External callers can also use this // method to ensure all data is flushed to dis before querying the log. func (s *Switch) FlushForwardingEvents() error { // First, we'll obtain a copy of the current set of pending forwarding // events. s.fwdEventMtx.Lock() // If we won't have any forwarding events, then we can exit early. if len(s.pendingFwdingEvents) == 0 { s.fwdEventMtx.Unlock() return nil } events := make([]channeldb.ForwardingEvent, len(s.pendingFwdingEvents)) copy(events[:], s.pendingFwdingEvents[:]) // With the copy obtained, we can now clear out the header pointer of // the current slice. This way, we can re-use the underlying storage // allocated for the slice. s.pendingFwdingEvents = s.pendingFwdingEvents[:0] s.fwdEventMtx.Unlock() // Finally, we'll write out the copied events to the persistent // forwarding log. return s.cfg.FwdingLog.AddForwardingEvents(events) }