package htlcswitch import ( "bytes" "fmt" "sync" "github.com/coreos/bbolt" "github.com/davecgh/go-spew/spew" "github.com/go-errors/errors" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lnwire" ) var ( // ErrCorruptedCircuitMap indicates that the on-disk bucketing structure // has altered since the circuit map instance was initialized. ErrCorruptedCircuitMap = errors.New("circuit map has been corrupted") // ErrCircuitNotInHashIndex indicates that a particular circuit did not // appear in the in-memory hash index. ErrCircuitNotInHashIndex = errors.New("payment circuit not found in " + "hash index") // ErrUnknownCircuit signals that circuit could not be removed from the // map because it was not found. ErrUnknownCircuit = errors.New("unknown payment circuit") // ErrCircuitClosing signals that an htlc has already closed this // circuit in-memory. ErrCircuitClosing = errors.New("circuit has already been closed") // ErrDuplicateCircuit signals that this circuit was previously // added. ErrDuplicateCircuit = errors.New("duplicate circuit add") // ErrUnknownKeystone signals that no circuit was found using the // outgoing circuit key. ErrUnknownKeystone = errors.New("unknown circuit keystone") // ErrDuplicateKeystone signals that this circuit was previously // assigned a keystone. ErrDuplicateKeystone = errors.New("cannot add duplicate keystone") ) // CircuitModifier is a common interface used by channel links to modify the // contents of the circuit map maintained by the switch. type CircuitModifier interface { // OpenCircuits preemptively records a batch keystones that will mark // currently pending circuits as open. These changes can be rolled back // on restart if the outgoing Adds do not make it into a commitment // txn. OpenCircuits(...Keystone) error // TrimOpenCircuits removes a channel's open channels with htlc indexes // above `start`. TrimOpenCircuits(chanID lnwire.ShortChannelID, start uint64) error // DeleteCircuits removes the incoming circuit key to remove all // persistent references to a circuit. Returns a ErrUnknownCircuit if // any of the incoming keys are not known. DeleteCircuits(inKeys ...CircuitKey) error } // CircuitFwdActions represents the forwarding decision made by the circuit // map, and is returned from CommitCircuits. The sequence of circuits provided // to CommitCircuits is split into three sub-sequences, allowing the caller to // do an in-order scan, comparing the head of each subsequence, to determine // the decision made by the circuit map. type CircuitFwdActions struct { // Adds is the subsequence of circuits that were successfully committed // in the circuit map. Adds []*PaymentCircuit // Drops is the subsequence of circuits for which no action should be // done. Drops []*PaymentCircuit // Fails is the subsequence of circuits that should be failed back by // the calling link. Fails []*PaymentCircuit } // CircuitMap is an interface for managing the construction and teardown of // payment circuits used by the switch. type CircuitMap interface { CircuitModifier // CommitCircuits attempts to add the given circuits to the circuit // map. The list of circuits is split into three distinct // sub-sequences, corresponding to adds, drops, and fails. Adds should // be forwarded to the switch, while fails should be failed back // locally within the calling link. CommitCircuits(circuit ...*PaymentCircuit) (*CircuitFwdActions, error) // CloseCircuit marks the circuit identified by `outKey` as closing // in-memory, which prevents duplicate settles/fails from completing an // open circuit twice. CloseCircuit(outKey CircuitKey) (*PaymentCircuit, error) // FailCircuit is used by locally failed HTLCs to mark the circuit // identified by `inKey` as closing in-memory, which prevents duplicate // settles/fails from being accepted for the same circuit. FailCircuit(inKey CircuitKey) (*PaymentCircuit, error) // LookupCircuit queries the circuit map for the circuit identified by // inKey. LookupCircuit(inKey CircuitKey) *PaymentCircuit // LookupOpenCircuit queries the circuit map for a circuit identified // by its outgoing circuit key. LookupOpenCircuit(outKey CircuitKey) *PaymentCircuit // LookupByPaymentHash queries the circuit map and returns all open // circuits that use the given payment hash. LookupByPaymentHash(hash [32]byte) []*PaymentCircuit // NumPending returns the total number of active circuits added by // CommitCircuits. NumPending() int // NumOpen returns the number of circuits with HTLCs that have been // forwarded via an outgoing link. NumOpen() int } var ( // circuitAddKey is the key used to retrieve the bucket containing // payment circuits. A circuit records information about how to return // a packet to the source link, potentially including an error // encrypter for applying this hop's encryption to the payload in the // reverse direction. circuitAddKey = []byte("circuit-adds") // circuitKeystoneKey is used to retrieve the bucket containing circuit // keystones, which are set in place once a forwarded packet is // assigned an index on an outgoing commitment txn. circuitKeystoneKey = []byte("circuit-keystones") ) // circuitMap is a data structure that implements thread safe, persistent // storage of circuit routing information. The switch consults a circuit map to // determine where to forward returning HTLC update messages. Circuits are // always identifiable by their incoming CircuitKey, in addition to their // outgoing CircuitKey if the circuit is fully-opened. type circuitMap struct { cfg *CircuitMapConfig mtx sync.RWMutex // pending is an in-memory mapping of all half payment circuits, and is // kept in sync with the on-disk contents of the circuit map. pending map[CircuitKey]*PaymentCircuit // opened is an in-memory mapping of all full payment circuits, which // is also synchronized with the persistent state of the circuit map. opened map[CircuitKey]*PaymentCircuit // closed is an in-memory set of circuits for which the switch has // received a settle or fail. This precedes the actual deletion of a // circuit from disk. closed map[CircuitKey]struct{} // hashIndex is a volatile index that facilitates fast queries by // payment hash against the contents of circuits. This index can be // reconstructed entirely from the set of persisted full circuits on // startup. hashIndex map[[32]byte]map[CircuitKey]struct{} } // CircuitMapConfig houses the critical interfaces and references necessary to // parameterize an instance of circuitMap. type CircuitMapConfig struct { // DB provides the persistent storage engine for the circuit map. // TODO(conner): create abstraction to allow for the substitution of // other persistence engines. DB *channeldb.DB // ExtractErrorEncrypter derives the shared secret used to encrypt // errors from the obfuscator's ephemeral public key. ExtractErrorEncrypter ErrorEncrypterExtracter } // NewCircuitMap creates a new instance of the circuitMap. func NewCircuitMap(cfg *CircuitMapConfig) (CircuitMap, error) { cm := &circuitMap{ cfg: cfg, } // Initialize the on-disk buckets used by the circuit map. if err := cm.initBuckets(); err != nil { return nil, err } // Load any previously persisted circuit into back into memory. if err := cm.restoreMemState(); err != nil { return nil, err } // Trim any keystones that were not committed in an outgoing commit txn. // // NOTE: This operation will be applied to the persistent state of all // active channels. Therefore, it must be called before any links are // created to avoid interfering with normal operation. if err := cm.trimAllOpenCircuits(); err != nil { return nil, err } return cm, nil } // initBuckets ensures that the primary buckets used by the circuit are // initialized so that we can assume their existence after startup. func (cm *circuitMap) initBuckets() error { return cm.cfg.DB.Update(func(tx *bolt.Tx) error { _, err := tx.CreateBucketIfNotExists(circuitKeystoneKey) if err != nil { return err } _, err = tx.CreateBucketIfNotExists(circuitAddKey) return err }) } // restoreMemState loads the contents of the half circuit and full circuit // buckets from disk and reconstructs the in-memory representation of the // circuit map. Afterwards, the state of the hash index is reconstructed using // the recovered set of full circuits. This method will also remove any stray // keystones, which are those that appear fully-opened, but have no pending // circuit related to the intended incoming link. func (cm *circuitMap) restoreMemState() error { log.Infof("Restoring in-memory circuit state from disk") var ( opened = make(map[CircuitKey]*PaymentCircuit) pending = make(map[CircuitKey]*PaymentCircuit) ) if err := cm.cfg.DB.Update(func(tx *bolt.Tx) error { // Restore any of the circuits persisted in the circuit bucket // back into memory. circuitBkt := tx.Bucket(circuitAddKey) if circuitBkt == nil { return ErrCorruptedCircuitMap } if err := circuitBkt.ForEach(func(_, v []byte) error { circuit, err := cm.decodeCircuit(v) if err != nil { return err } circuit.LoadedFromDisk = true pending[circuit.Incoming] = circuit return nil }); err != nil { return err } // Furthermore, load the keystone bucket and resurrect the // keystones used in any open circuits. keystoneBkt := tx.Bucket(circuitKeystoneKey) if keystoneBkt == nil { return ErrCorruptedCircuitMap } var strayKeystones []Keystone if err := keystoneBkt.ForEach(func(k, v []byte) error { var ( inKey CircuitKey outKey = &CircuitKey{} ) // Decode the incoming and outgoing circuit keys. if err := inKey.SetBytes(v); err != nil { return err } if err := outKey.SetBytes(k); err != nil { return err } // Retrieve the pending circuit, set its keystone, then // add it to the opened map. circuit, ok := pending[inKey] if ok { circuit.Outgoing = outKey opened[*outKey] = circuit } else { strayKeystones = append(strayKeystones, Keystone{ InKey: inKey, OutKey: *outKey, }) } return nil }); err != nil { return err } // If any stray keystones were found, we'll proceed to prune // them from the circuit map's persistent storage. This may // manifest on older nodes that had updated channels before // their short channel id was set properly. We believe this // issue has been fixed, though this will allow older nodes to // recover without additional intervention. for _, strayKeystone := range strayKeystones { // As a precaution, we will only cleanup keystones // related to locally-initiated payments. If a // documented case of stray keystones emerges for // forwarded payments, this check should be removed, but // with extreme caution. if strayKeystone.OutKey.ChanID != sourceHop { continue } log.Infof("Removing stray keystone: %v", strayKeystone) err := keystoneBkt.Delete(strayKeystone.OutKey.Bytes()) if err != nil { return err } } return nil }); err != nil { return err } cm.pending = pending cm.opened = opened cm.closed = make(map[CircuitKey]struct{}) log.Infof("Payment circuits loaded: num_pending=%v, num_open=%v", len(pending), len(opened)) // Finally, reconstruct the hash index by running through our set of // open circuits. cm.hashIndex = make(map[[32]byte]map[CircuitKey]struct{}) for _, circuit := range opened { cm.addCircuitToHashIndex(circuit) } return nil } // decodeCircuit reconstructs an in-memory payment circuit from a byte slice. // The byte slice is assumed to have been generated by the circuit's Encode // method. If the decoding is successful, the onion obfuscator will be // reextracted, since it is not stored in plaintext on disk. func (cm *circuitMap) decodeCircuit(v []byte) (*PaymentCircuit, error) { var circuit = &PaymentCircuit{} circuitReader := bytes.NewReader(v) if err := circuit.Decode(circuitReader); err != nil { return nil, err } // If the error encrypter is nil, this is locally-source payment so // there is no encrypter. if circuit.ErrorEncrypter == nil { return circuit, nil } // Otherwise, we need to reextract the encrypter, so that the shared // secret is rederived from what was decoded. err := circuit.ErrorEncrypter.Reextract( cm.cfg.ExtractErrorEncrypter, ) if err != nil { return nil, err } return circuit, nil } // trimAllOpenCircuits reads the set of active channels from disk and trims // keystones for any non-pending channels using the next unallocated htlc index. // This method is intended to be called on startup. Each link will also trim // it's own circuits upon startup. // // NOTE: This operation will be applied to the persistent state of all active // channels. Therefore, it must be called before any links are created to avoid // interfering with normal operation. func (cm *circuitMap) trimAllOpenCircuits() error { activeChannels, err := cm.cfg.DB.FetchAllOpenChannels() if err != nil { return err } for _, activeChannel := range activeChannels { if activeChannel.IsPending { continue } // First, skip any channels that have not been assigned their // final channel identifier, otherwise we would try to trim // htlcs belonging to the all-zero, sourceHop ID. chanID := activeChannel.ShortChanID() if chanID == sourceHop { continue } // Next, retrieve the next unallocated htlc index, which bounds // the cutoff of confirmed htlc indexes. start, err := activeChannel.NextLocalHtlcIndex() if err != nil { return err } // Finally, remove all pending circuits above at or above the // next unallocated local htlc indexes. This has the effect of // reverting any circuits that have either not been locked in, // or had not been included in a pending commitment. err = cm.TrimOpenCircuits(chanID, start) if err != nil { return err } } return nil } // TrimOpenCircuits removes a channel's keystones above the short chan id's // highest committed htlc index. This has the effect of returning those // circuits to a half-open state. Since opening of circuits is done in advance // of actually committing the Add htlcs into a commitment txn, this allows // circuits to be opened preemptively, since we can roll them back after any // failures. func (cm *circuitMap) TrimOpenCircuits(chanID lnwire.ShortChannelID, start uint64) error { log.Infof("Trimming open circuits for chan_id=%v, start_htlc_id=%v", chanID, start) var trimmedOutKeys []CircuitKey // Scan forward from the last unacked htlc id, stopping as soon as we // don't find any more. Outgoing htlc id's must be assigned in order, // so there should never be disjoint segments of keystones to trim. cm.mtx.Lock() for i := start; ; i++ { outKey := CircuitKey{ ChanID: chanID, HtlcID: i, } circuit, ok := cm.opened[outKey] if !ok { break } circuit.Outgoing = nil delete(cm.opened, outKey) trimmedOutKeys = append(trimmedOutKeys, outKey) cm.removeCircuitFromHashIndex(circuit) } cm.mtx.Unlock() if len(trimmedOutKeys) == 0 { return nil } return cm.cfg.DB.Update(func(tx *bolt.Tx) error { keystoneBkt := tx.Bucket(circuitKeystoneKey) if keystoneBkt == nil { return ErrCorruptedCircuitMap } for _, outKey := range trimmedOutKeys { err := keystoneBkt.Delete(outKey.Bytes()) if err != nil { return err } } return nil }) } // LookupByHTLC looks up the payment circuit by the outgoing channel and HTLC // IDs. Returns nil if there is no such circuit. func (cm *circuitMap) LookupCircuit(inKey CircuitKey) *PaymentCircuit { cm.mtx.RLock() defer cm.mtx.RUnlock() return cm.pending[inKey] } // LookupOpenCircuit searches for the circuit identified by its outgoing circuit // key. func (cm *circuitMap) LookupOpenCircuit(outKey CircuitKey) *PaymentCircuit { cm.mtx.RLock() defer cm.mtx.RUnlock() return cm.opened[outKey] } // LookupByPaymentHash looks up and returns any payment circuits with a given // payment hash. func (cm *circuitMap) LookupByPaymentHash(hash [32]byte) []*PaymentCircuit { cm.mtx.RLock() defer cm.mtx.RUnlock() var circuits []*PaymentCircuit if circuitSet, ok := cm.hashIndex[hash]; ok { // Iterate over the outgoing circuit keys found with this hash, // and retrieve the circuit from the opened map. circuits = make([]*PaymentCircuit, 0, len(circuitSet)) for key := range circuitSet { if circuit, ok := cm.opened[key]; ok { circuits = append(circuits, circuit) } } } return circuits } // CommitCircuits accepts any number of circuits and persistently adds them to // the switch's circuit map. The method returns a list of circuits that had not // been seen prior by the switch. A link should only forward HTLCs corresponding // to the returned circuits to the switch. // // NOTE: This method uses batched writes to improve performance, gains will only // be realized if it is called concurrently from separate goroutines. func (cm *circuitMap) CommitCircuits(circuits ...*PaymentCircuit) ( *CircuitFwdActions, error) { inKeys := make([]CircuitKey, 0, len(circuits)) for _, circuit := range circuits { inKeys = append(inKeys, circuit.Incoming) } log.Tracef("Committing fresh circuits: %v", newLogClosure(func() string { return spew.Sdump(inKeys) })) actions := &CircuitFwdActions{} // If an empty list was passed, return early to avoid grabbing the lock. if len(circuits) == 0 { return actions, nil } // First, we reconcile the provided circuits with our set of pending // circuits to construct a set of new circuits that need to be written // to disk. The circuit's pointer is stored so that we only permit this // exact circuit to be forwarded through the switch. If a circuit is // already pending, the htlc will be reforwarded by the switch. // // NOTE: We track an additional addFails subsequence, which permits us // to fail back all packets that weren't dropped if we encounter an // error when committing the circuits. cm.mtx.Lock() var adds, drops, fails, addFails []*PaymentCircuit for _, circuit := range circuits { inKey := circuit.InKey() if foundCircuit, ok := cm.pending[inKey]; ok { switch { // This circuit has a keystone, it's waiting for a // response from the remote peer on the outgoing link. // Drop it like it's hot, ensure duplicates get caught. case foundCircuit.HasKeystone(): drops = append(drops, circuit) // If no keystone is set and the switch has not been // restarted, the corresponding packet should still be // in the outgoing link's mailbox. It will be delivered // if it comes online before the switch goes down. // // NOTE: Dropping here prevents a flapping, incoming // link from failing a duplicate add while it is still // in the server's memory mailboxes. case !foundCircuit.LoadedFromDisk: drops = append(drops, circuit) // Otherwise, the in-mem packet has been lost due to a // restart. It is now safe to send back a failure along // the incoming link. The incoming link should be able // detect and ignore duplicate packets of this type. default: fails = append(fails, circuit) addFails = append(addFails, circuit) } continue } cm.pending[inKey] = circuit adds = append(adds, circuit) addFails = append(addFails, circuit) } cm.mtx.Unlock() // If all circuits are dropped or failed, we are done. if len(adds) == 0 { actions.Drops = drops actions.Fails = fails return actions, nil } // Now, optimistically serialize the circuits to add. var bs = make([]bytes.Buffer, len(adds)) for i, circuit := range adds { if err := circuit.Encode(&bs[i]); err != nil { actions.Drops = drops actions.Fails = addFails return actions, err } } // Write the entire batch of circuits to the persistent circuit bucket // using bolt's Batch write. This method must be called from multiple, // distinct goroutines to have any impact on performance. err := cm.cfg.DB.Batch(func(tx *bolt.Tx) error { circuitBkt := tx.Bucket(circuitAddKey) if circuitBkt == nil { return ErrCorruptedCircuitMap } for i, circuit := range adds { inKeyBytes := circuit.InKey().Bytes() circuitBytes := bs[i].Bytes() err := circuitBkt.Put(inKeyBytes, circuitBytes) if err != nil { return err } } return nil }) // Return if the write succeeded. if err == nil { actions.Adds = adds actions.Drops = drops actions.Fails = fails return actions, nil } // Otherwise, rollback the circuits added to the pending set if the // write failed. cm.mtx.Lock() for _, circuit := range adds { delete(cm.pending, circuit.InKey()) } cm.mtx.Unlock() // Since our write failed, we will return the dropped packets and mark // all other circuits as failed. actions.Drops = drops actions.Fails = addFails return actions, err } // Keystone is a tuple binding an incoming and outgoing CircuitKey. Keystones // are preemptively written by an outgoing link before signing a new commitment // state, and cements which HTLCs we are awaiting a response from a remote // peer. type Keystone struct { InKey CircuitKey OutKey CircuitKey } // String returns a human readable description of the Keystone. func (k *Keystone) String() string { return fmt.Sprintf("%s --> %s", k.InKey, k.OutKey) } // OpenCircuits sets the outgoing circuit key for the circuit identified by // inKey, persistently marking the circuit as opened. After the changes have // been persisted, the circuit map's in-memory indexes are updated so that this // circuit can be queried using LookupByKeystone or LookupByPaymentHash. func (cm *circuitMap) OpenCircuits(keystones ...Keystone) error { if len(keystones) == 0 { return nil } log.Tracef("Opening finalized circuits: %v", newLogClosure(func() string { return spew.Sdump(keystones) })) // Check that all keystones correspond to committed-but-unopened // circuits. cm.mtx.RLock() openedCircuits := make([]*PaymentCircuit, 0, len(keystones)) for _, ks := range keystones { if _, ok := cm.opened[ks.OutKey]; ok { cm.mtx.RUnlock() return ErrDuplicateKeystone } circuit, ok := cm.pending[ks.InKey] if !ok { cm.mtx.RUnlock() return ErrUnknownCircuit } openedCircuits = append(openedCircuits, circuit) } cm.mtx.RUnlock() err := cm.cfg.DB.Update(func(tx *bolt.Tx) error { // Now, load the circuit bucket to which we will write the // already serialized circuit. keystoneBkt := tx.Bucket(circuitKeystoneKey) if keystoneBkt == nil { return ErrCorruptedCircuitMap } for _, ks := range keystones { outBytes := ks.OutKey.Bytes() inBytes := ks.InKey.Bytes() err := keystoneBkt.Put(outBytes, inBytes) if err != nil { return err } } return nil }) if err != nil { return err } cm.mtx.Lock() for i, circuit := range openedCircuits { ks := keystones[i] // Since our persistent operation was successful, we can now // modify the in memory representations. Set the outgoing // circuit key on our pending circuit, add the same circuit to // set of opened circuits, and add this circuit to the hash // index. circuit.Outgoing = &CircuitKey{} *circuit.Outgoing = ks.OutKey cm.opened[ks.OutKey] = circuit cm.addCircuitToHashIndex(circuit) } cm.mtx.Unlock() return nil } // addCirciutToHashIndex inserts a circuit into the circuit map's hash index, so // that it can be queried using LookupByPaymentHash. func (cm *circuitMap) addCircuitToHashIndex(c *PaymentCircuit) { if _, ok := cm.hashIndex[c.PaymentHash]; !ok { cm.hashIndex[c.PaymentHash] = make(map[CircuitKey]struct{}) } cm.hashIndex[c.PaymentHash][c.OutKey()] = struct{}{} } // FailCircuit marks the circuit identified by `inKey` as closing in-memory, // which prevents duplicate settles/fails from completing an open circuit twice. func (cm *circuitMap) FailCircuit(inKey CircuitKey) (*PaymentCircuit, error) { cm.mtx.Lock() defer cm.mtx.Unlock() circuit, ok := cm.pending[inKey] if !ok { return nil, ErrUnknownCircuit } _, ok = cm.closed[inKey] if ok { return nil, ErrCircuitClosing } cm.closed[inKey] = struct{}{} return circuit, nil } // CloseCircuit marks the circuit identified by `outKey` as closing in-memory, // which prevents duplicate settles/fails from completing an open // circuit twice. func (cm *circuitMap) CloseCircuit(outKey CircuitKey) (*PaymentCircuit, error) { cm.mtx.Lock() defer cm.mtx.Unlock() circuit, ok := cm.opened[outKey] if !ok { return nil, ErrUnknownCircuit } _, ok = cm.closed[circuit.Incoming] if ok { return nil, ErrCircuitClosing } cm.closed[circuit.Incoming] = struct{}{} return circuit, nil } // DeleteCircuits destroys the target circuits by removing them from the circuit // map, additionally removing the circuits' keystones if any HTLCs were // forwarded through an outgoing link. The circuits should be identified by its // incoming circuit key. If a given circuit is not found in the circuit map, it // will be ignored from the query. This would typically indicate that the // circuit was already cleaned up at a different point in time. func (cm *circuitMap) DeleteCircuits(inKeys ...CircuitKey) error { log.Tracef("Deleting resolved circuits: %v", newLogClosure(func() string { return spew.Sdump(inKeys) })) var ( closingCircuits = make(map[CircuitKey]struct{}) removedCircuits = make(map[CircuitKey]*PaymentCircuit) ) cm.mtx.Lock() // Remove any references to the circuits from memory, keeping track of // which circuits were removed, and which ones had been marked closed. // This can be used to restore these entries later if the persistent // removal fails. for _, inKey := range inKeys { circuit, ok := cm.pending[inKey] if !ok { continue } delete(cm.pending, inKey) if _, ok := cm.closed[inKey]; ok { closingCircuits[inKey] = struct{}{} delete(cm.closed, inKey) } if circuit.HasKeystone() { delete(cm.opened, circuit.OutKey()) cm.removeCircuitFromHashIndex(circuit) } removedCircuits[inKey] = circuit } cm.mtx.Unlock() err := cm.cfg.DB.Batch(func(tx *bolt.Tx) error { for _, circuit := range removedCircuits { // If this htlc made it to an outgoing link, load the // keystone bucket from which we will remove the // outgoing circuit key. if circuit.HasKeystone() { keystoneBkt := tx.Bucket(circuitKeystoneKey) if keystoneBkt == nil { return ErrCorruptedCircuitMap } outKey := circuit.OutKey() err := keystoneBkt.Delete(outKey.Bytes()) if err != nil { return err } } // Remove the circuit itself based on the incoming // circuit key. circuitBkt := tx.Bucket(circuitAddKey) if circuitBkt == nil { return ErrCorruptedCircuitMap } inKey := circuit.InKey() if err := circuitBkt.Delete(inKey.Bytes()); err != nil { return err } } return nil }) // Return if the write succeeded. if err == nil { return nil } // If the persistent changes failed, restore the circuit map to it's // previous state. cm.mtx.Lock() for inKey, circuit := range removedCircuits { cm.pending[inKey] = circuit if _, ok := closingCircuits[inKey]; ok { cm.closed[inKey] = struct{}{} } if circuit.HasKeystone() { cm.opened[circuit.OutKey()] = circuit cm.addCircuitToHashIndex(circuit) } } cm.mtx.Unlock() return err } // removeCircuitFromHashIndex removes the given circuit from the hash index, // pruning any unnecessary memory optimistically. func (cm *circuitMap) removeCircuitFromHashIndex(c *PaymentCircuit) { // Locate bucket containing this circuit's payment hashes. circuitsWithHash, ok := cm.hashIndex[c.PaymentHash] if !ok { return } outKey := c.OutKey() // Remove this circuit from the set of circuitsWithHash. delete(circuitsWithHash, outKey) // Prune the payment hash bucket if no other entries remain. if len(circuitsWithHash) == 0 { delete(cm.hashIndex, c.PaymentHash) } } // NumPending returns the number of active circuits added to the circuit map. func (cm *circuitMap) NumPending() int { cm.mtx.RLock() defer cm.mtx.RUnlock() return len(cm.pending) } // NumOpen returns the number of circuits that have been opened by way of // setting their keystones. This is the number of HTLCs that are waiting for a // settle/fail response from a remote peer. func (cm *circuitMap) NumOpen() int { cm.mtx.RLock() defer cm.mtx.RUnlock() return len(cm.opened) }