package wtclient import ( "bytes" "fmt" "sync" "time" "github.com/btcsuite/btcd/btcec" "github.com/btcsuite/btcd/chaincfg/chainhash" "github.com/lightningnetwork/lnd/input" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/watchtower/wtdb" "github.com/lightningnetwork/lnd/watchtower/wtpolicy" "github.com/lightningnetwork/lnd/watchtower/wtserver" "github.com/lightningnetwork/lnd/watchtower/wtwire" ) const ( // DefaultReadTimeout specifies the default duration we will wait during // a read before breaking out of a blocking read. DefaultReadTimeout = 15 * time.Second // DefaultWriteTimeout specifies the default duration we will wait during // a write before breaking out of a blocking write. DefaultWriteTimeout = 15 * time.Second // DefaultStatInterval specifies the default interval between logging // metrics about the client's operation. DefaultStatInterval = time.Minute // DefaultForceQuitDelay specifies the default duration after which the // client should abandon any pending updates or session negotiations // before terminating. DefaultForceQuitDelay = 10 * time.Second ) // Client is the primary interface used by the daemon to control a client's // lifecycle and backup revoked states. type Client interface { // RegisterChannel persistently initializes any channel-dependent // parameters within the client. This should be called during link // startup to ensure that the client is able to support the link during // operation. RegisterChannel(lnwire.ChannelID) error // BackupState initiates a request to back up a particular revoked // state. If the method returns nil, the backup is guaranteed to be // successful unless the client is force quit, or the justice // transaction would create dust outputs when trying to abide by the // negotiated policy. BackupState(*lnwire.ChannelID, *lnwallet.BreachRetribution) error // Start initializes the watchtower client, allowing it process requests // to backup revoked channel states. Start() error // Stop attempts a graceful shutdown of the watchtower client. In doing // so, it will attempt to flush the pipeline and deliver any queued // states to the tower before exiting. Stop() error // ForceQuit will forcibly shutdown the watchtower client. Calling this // may lead to queued states being dropped. ForceQuit() } // Config provides the TowerClient with access to the resources it requires to // perform its duty. All nillable fields must be non-nil for the tower to be // initialized properly. type Config struct { // Signer provides access to the wallet so that the client can sign // justice transactions that spend from a remote party's commitment // transaction. Signer input.Signer // NewAddress generates a new on-chain sweep pkscript. NewAddress func() ([]byte, error) // SecretKeyRing is used to derive the session keys used to communicate // with the tower. The client only stores the KeyLocators internally so // that we never store private keys on disk. SecretKeyRing SecretKeyRing // Dial connects to an addr using the specified net and returns the // connection object. Dial Dial // AuthDialer establishes a brontide connection over an onion or clear // network. AuthDial AuthDialer // DB provides access to the client's stable storage medium. DB DB // Policy is the session policy the client will propose when creating // new sessions with the tower. If the policy differs from any active // sessions recorded in the database, those sessions will be ignored and // new sessions will be requested immediately. Policy wtpolicy.Policy // PrivateTower is the net address of a private tower. The client will // try to create all sessions with this tower. PrivateTower *lnwire.NetAddress // ChainHash identifies the chain that the client is on and for which // the tower must be watching to monitor for breaches. ChainHash chainhash.Hash // ForceQuitDelay is the duration after attempting to shutdown that the // client will automatically abort any pending backups if an unclean // shutdown is detected. If the value is less than or equal to zero, a // call to Stop may block indefinitely. The client can always be // ForceQuit externally irrespective of the chosen parameter. ForceQuitDelay time.Duration // ReadTimeout is the duration we will wait during a read before // breaking out of a blocking read. If the value is less than or equal // to zero, the default will be used instead. ReadTimeout time.Duration // WriteTimeout is the duration we will wait during a write before // breaking out of a blocking write. If the value is less than or equal // to zero, the default will be used instead. WriteTimeout time.Duration // MinBackoff defines the initial backoff applied to connections with // watchtowers. Subsequent backoff durations will grow exponentially up // until MaxBackoff. MinBackoff time.Duration // MaxBackoff defines the maximum backoff applied to connections with // watchtowers. If the exponential backoff produces a timeout greater // than this value, the backoff will be clamped to MaxBackoff. MaxBackoff time.Duration } // TowerClient is a concrete implementation of the Client interface, offering a // non-blocking, reliable subsystem for backing up revoked states to a specified // private tower. type TowerClient struct { started sync.Once stopped sync.Once forced sync.Once cfg *Config pipeline *taskPipeline negotiator SessionNegotiator candidateSessions map[wtdb.SessionID]*wtdb.ClientSession activeSessions sessionQueueSet sessionQueue *sessionQueue prevTask *backupTask backupMu sync.Mutex summaries wtdb.ChannelSummaries chanCommitHeights map[lnwire.ChannelID]uint64 statTicker *time.Ticker stats clientStats wg sync.WaitGroup forceQuit chan struct{} } // Compile-time constraint to ensure *TowerClient implements the Client // interface. var _ Client = (*TowerClient)(nil) // New initializes a new TowerClient from the provide Config. An error is // returned if the client could not initialized. func New(config *Config) (*TowerClient, error) { // Copy the config to prevent side-effects from modifying both the // internal and external version of the Config. cfg := new(Config) *cfg = *config // Set the read timeout to the default if none was provided. if cfg.ReadTimeout <= 0 { cfg.ReadTimeout = DefaultReadTimeout } // Set the write timeout to the default if none was provided. if cfg.WriteTimeout <= 0 { cfg.WriteTimeout = DefaultWriteTimeout } // Record the tower in our database, also loading any addresses // previously associated with its public key. tower, err := cfg.DB.CreateTower(cfg.PrivateTower) if err != nil { return nil, err } log.Infof("Using private watchtower %s, offering policy %s", cfg.PrivateTower, cfg.Policy) c := &TowerClient{ cfg: cfg, pipeline: newTaskPipeline(), activeSessions: make(sessionQueueSet), statTicker: time.NewTicker(DefaultStatInterval), forceQuit: make(chan struct{}), } c.negotiator = newSessionNegotiator(&NegotiatorConfig{ DB: cfg.DB, SecretKeyRing: cfg.SecretKeyRing, Policy: cfg.Policy, ChainHash: cfg.ChainHash, SendMessage: c.sendMessage, ReadMessage: c.readMessage, Dial: c.dial, Candidates: newTowerListIterator(tower), MinBackoff: cfg.MinBackoff, MaxBackoff: cfg.MaxBackoff, }) // Next, load all active sessions from the db into the client. We will // use any of these session if their policies match the current policy // of the client, otherwise they will be ignored and new sessions will // be requested. c.candidateSessions, err = c.cfg.DB.ListClientSessions() if err != nil { return nil, err } // Reload any towers from disk using the tower IDs contained in each // candidate session. We will also rederive any session keys needed to // be able to communicate with the towers and authenticate session // requests. This prevents us from having to store the private keys on // disk. for _, s := range c.candidateSessions { tower, err := c.cfg.DB.LoadTower(s.TowerID) if err != nil { return nil, err } sessionPriv, err := DeriveSessionKey( c.cfg.SecretKeyRing, s.KeyIndex, ) if err != nil { return nil, err } s.Tower = tower s.SessionPrivKey = sessionPriv } // Reconstruct the highest commit height processed for each channel // under the client's current policy. c.buildHighestCommitHeights() // Finally, load the sweep pkscripts that have been generated for all // previously registered channels. c.summaries, err = c.cfg.DB.FetchChanSummaries() if err != nil { return nil, err } return c, nil } // buildHighestCommitHeights inspects the full set of candidate client sessions // loaded from disk, and determines the highest known commit height for each // channel. This allows the client to reject backups that it has already // processed for it's active policy. func (c *TowerClient) buildHighestCommitHeights() { chanCommitHeights := make(map[lnwire.ChannelID]uint64) for _, s := range c.candidateSessions { // We only want to consider accepted updates that have been // accepted under an identical policy to the client's current // policy. if s.Policy != c.cfg.Policy { continue } // Take the highest commit height found in the session's // committed updates. for _, committedUpdate := range s.CommittedUpdates { bid := committedUpdate.BackupID height, ok := chanCommitHeights[bid.ChanID] if !ok || bid.CommitHeight > height { chanCommitHeights[bid.ChanID] = bid.CommitHeight } } // Take the heights commit height found in the session's acked // updates. for _, bid := range s.AckedUpdates { height, ok := chanCommitHeights[bid.ChanID] if !ok || bid.CommitHeight > height { chanCommitHeights[bid.ChanID] = bid.CommitHeight } } } c.chanCommitHeights = chanCommitHeights } // Start initializes the watchtower client by loading or negotiating an active // session and then begins processing backup tasks from the request pipeline. func (c *TowerClient) Start() error { var err error c.started.Do(func() { log.Infof("Starting watchtower client") // First, restart a session queue for any sessions that have // committed but unacked state updates. This ensures that these // sessions will be able to flush the committed updates after a // restart. for _, session := range c.candidateSessions { if len(session.CommittedUpdates) > 0 { log.Infof("Starting session=%s to process "+ "%d committed backups", session.ID, len(session.CommittedUpdates)) c.initActiveQueue(session) } } // Now start the session negotiator, which will allow us to // request new session as soon as the backupDispatcher starts // up. err = c.negotiator.Start() if err != nil { return } // Start the task pipeline to which new backup tasks will be // submitted from active links. c.pipeline.Start() c.wg.Add(1) go c.backupDispatcher() log.Infof("Watchtower client started successfully") }) return err } // Stop idempotently initiates a graceful shutdown of the watchtower client. func (c *TowerClient) Stop() error { c.stopped.Do(func() { log.Debugf("Stopping watchtower client") // 1. Shutdown the backup queue, which will prevent any further // updates from being accepted. In practice, the links should be // shutdown before the client has been stopped, so all updates // would have been added prior. c.pipeline.Stop() // 2. To ensure we don't hang forever on shutdown due to // unintended failures, we'll delay a call to force quit the // pipeline if a ForceQuitDelay is specified. This will have no // effect if the pipeline shuts down cleanly before the delay // fires. // // For full safety, this can be set to 0 and wait out // indefinitely. However for mobile clients which may have a // limited amount of time to exit before the background process // is killed, this offers a way to ensure the process // terminates. if c.cfg.ForceQuitDelay > 0 { time.AfterFunc(c.cfg.ForceQuitDelay, c.ForceQuit) } // 3. Once the backup queue has shutdown, wait for the main // dispatcher to exit. The backup queue will signal it's // completion to the dispatcher, which releases the wait group // after all tasks have been assigned to session queues. c.wg.Wait() // 4. Since all valid tasks have been assigned to session // queues, we no longer need to negotiate sessions. c.negotiator.Stop() log.Debugf("Waiting for active session queues to finish "+ "draining, stats: %s", c.stats) // 5. Shutdown all active session queues in parallel. These will // exit once all updates have been acked by the watchtower. c.activeSessions.ApplyAndWait(func(s *sessionQueue) func() { return s.Stop }) // Skip log if force quitting. select { case <-c.forceQuit: return default: } log.Debugf("Client successfully stopped, stats: %s", c.stats) }) return nil } // ForceQuit idempotently initiates an unclean shutdown of the watchtower // client. This should only be executed if Stop is unable to exit cleanly. func (c *TowerClient) ForceQuit() { c.forced.Do(func() { log.Infof("Force quitting watchtower client") // 1. Shutdown the backup queue, which will prevent any further // updates from being accepted. In practice, the links should be // shutdown before the client has been stopped, so all updates // would have been added prior. c.pipeline.ForceQuit() // 2. Once the backup queue has shutdown, wait for the main // dispatcher to exit. The backup queue will signal it's // completion to the dispatcher, which releases the wait group // after all tasks have been assigned to session queues. close(c.forceQuit) c.wg.Wait() // 3. Since all valid tasks have been assigned to session // queues, we no longer need to negotiate sessions. c.negotiator.Stop() // 4. Force quit all active session queues in parallel. These // will exit once all updates have been acked by the watchtower. c.activeSessions.ApplyAndWait(func(s *sessionQueue) func() { return s.ForceQuit }) log.Infof("Watchtower client unclean shutdown complete, "+ "stats: %s", c.stats) }) } // RegisterChannel persistently initializes any channel-dependent parameters // within the client. This should be called during link startup to ensure that // the client is able to support the link during operation. func (c *TowerClient) RegisterChannel(chanID lnwire.ChannelID) error { c.backupMu.Lock() defer c.backupMu.Unlock() // If a pkscript for this channel already exists, the channel has been // previously registered. if _, ok := c.summaries[chanID]; ok { return nil } // Otherwise, generate a new sweep pkscript used to sweep funds for this // channel. pkScript, err := c.cfg.NewAddress() if err != nil { return err } // Persist the sweep pkscript so that restarts will not introduce // address inflation when the channel is reregistered after a restart. err = c.cfg.DB.RegisterChannel(chanID, pkScript) if err != nil { return err } // Finally, cache the pkscript in our in-memory cache to avoid db // lookups for the remainder of the daemon's execution. c.summaries[chanID] = wtdb.ClientChanSummary{ SweepPkScript: pkScript, } return nil } // BackupState initiates a request to back up a particular revoked state. If the // method returns nil, the backup is guaranteed to be successful unless the: // - client is force quit, // - justice transaction would create dust outputs when trying to abide by the // negotiated policy, or // - breached outputs contain too little value to sweep at the target sweep fee // rate. func (c *TowerClient) BackupState(chanID *lnwire.ChannelID, breachInfo *lnwallet.BreachRetribution) error { // Retrieve the cached sweep pkscript used for this channel. c.backupMu.Lock() summary, ok := c.summaries[*chanID] if !ok { c.backupMu.Unlock() return ErrUnregisteredChannel } // Ignore backups that have already been presented to the client. height, ok := c.chanCommitHeights[*chanID] if ok && breachInfo.RevokedStateNum <= height { c.backupMu.Unlock() log.Debugf("Ignoring duplicate backup for chanid=%v at height=%d", chanID, breachInfo.RevokedStateNum) return nil } // This backup has a higher commit height than any known backup for this // channel. We'll update our tip so that we won't accept it again if the // link flaps. c.chanCommitHeights[*chanID] = breachInfo.RevokedStateNum c.backupMu.Unlock() task := newBackupTask(chanID, breachInfo, summary.SweepPkScript) return c.pipeline.QueueBackupTask(task) } // nextSessionQueue attempts to fetch an active session from our set of // candidate sessions. Candidate sessions with a differing policy from the // active client's advertised policy will be ignored, but may be resumed if the // client is restarted with a matching policy. If no candidates were found, nil // is returned to signal that we need to request a new policy. func (c *TowerClient) nextSessionQueue() *sessionQueue { // Select any candidate session at random, and remove it from the set of // candidate sessions. var candidateSession *wtdb.ClientSession for id, sessionInfo := range c.candidateSessions { delete(c.candidateSessions, id) // Skip any sessions with policies that don't match the current // TxPolicy, as they would result in different justice // transactions from what is requested. These can be used again // if the client changes their configuration and restarting. if sessionInfo.Policy.TxPolicy != c.cfg.Policy.TxPolicy { continue } candidateSession = sessionInfo break } // If none of the sessions could be used or none were found, we'll // return nil to signal that we need another session to be negotiated. if candidateSession == nil { return nil } // Initialize the session queue and spin it up so it can begin handling // updates. If the queue was already made active on startup, this will // simply return the existing session queue from the set. return c.getOrInitActiveQueue(candidateSession) } // backupDispatcher processes events coming from the taskPipeline and is // responsible for detecting when the client needs to renegotiate a session to // fulfill continuing demand. The event loop exits after all tasks have been // received from the upstream taskPipeline, or the taskPipeline is force quit. // // NOTE: This method MUST be run as a goroutine. func (c *TowerClient) backupDispatcher() { defer c.wg.Done() log.Tracef("Starting backup dispatcher") defer log.Tracef("Stopping backup dispatcher") for { switch { // No active session queue and no additional sessions. case c.sessionQueue == nil && len(c.candidateSessions) == 0: log.Infof("Requesting new session.") // Immediately request a new session. c.negotiator.RequestSession() // Wait until we receive the newly negotiated session. // All backups sent in the meantime are queued in the // revoke queue, as we cannot process them. awaitSession: select { case session := <-c.negotiator.NewSessions(): log.Infof("Acquired new session with id=%s", session.ID) c.candidateSessions[session.ID] = session c.stats.sessionAcquired() case <-c.statTicker.C: log.Infof("Client stats: %s", c.stats) // Instead of looping, we'll jump back into the // select case and await the delivery of the // session to prevent us from re-requesting // additional sessions. goto awaitSession case <-c.forceQuit: return } // No active session queue but have additional sessions. case c.sessionQueue == nil && len(c.candidateSessions) > 0: // We've exhausted the prior session, we'll pop another // from the remaining sessions and continue processing // backup tasks. c.sessionQueue = c.nextSessionQueue() if c.sessionQueue != nil { log.Debugf("Loaded next candidate session "+ "queue id=%s", c.sessionQueue.ID()) } // Have active session queue, process backups. case c.sessionQueue != nil: if c.prevTask != nil { c.processTask(c.prevTask) // Continue to ensure the sessionQueue is // properly initialized before attempting to // process more tasks from the pipeline. continue } // Normal operation where new tasks are read from the // pipeline. select { // If any sessions are negotiated while we have an // active session queue, queue them for future use. // This shouldn't happen with the current design, so // it doesn't hurt to select here just in case. In the // future, we will likely allow more asynchrony so that // we can request new sessions before the session is // fully empty, which this case would handle. case session := <-c.negotiator.NewSessions(): log.Warnf("Acquired new session with id=%s", "while processing tasks", session.ID) c.candidateSessions[session.ID] = session c.stats.sessionAcquired() case <-c.statTicker.C: log.Infof("Client stats: %s", c.stats) // Process each backup task serially from the queue of // revoked states. case task, ok := <-c.pipeline.NewBackupTasks(): // All backups in the pipeline have been // processed, it is now safe to exit. if !ok { return } log.Debugf("Processing %v", task.id) c.stats.taskReceived() c.processTask(task) } } } } // processTask attempts to schedule the given backupTask on the active // sessionQueue. The task will either be accepted or rejected, afterwhich the // appropriate modifications to the client's state machine will be made. After // every invocation of processTask, the caller should ensure that the // sessionQueue hasn't been exhausted before proceeding to the next task. Tasks // that are rejected because the active sessionQueue is full will be cached as // the prevTask, and should be reprocessed after obtaining a new sessionQueue. func (c *TowerClient) processTask(task *backupTask) { status, accepted := c.sessionQueue.AcceptTask(task) if accepted { c.taskAccepted(task, status) } else { c.taskRejected(task, status) } } // taskAccepted processes the acceptance of a task by a sessionQueue depending // on the state the sessionQueue is in *after* the task is added. The client's // prevTask is always removed as a result of this call. The client's // sessionQueue will be removed if accepting the task left the sessionQueue in // an exhausted state. func (c *TowerClient) taskAccepted(task *backupTask, newStatus reserveStatus) { log.Infof("Queued %v successfully for session %v", task.id, c.sessionQueue.ID()) c.stats.taskAccepted() // If this task was accepted, we discard anything held in the prevTask. // Either it was nil before, or is the task which was just accepted. c.prevTask = nil switch newStatus { // The sessionQueue still has capacity after accepting this task. case reserveAvailable: // The sessionQueue is full after accepting this task, so we will need // to request a new one before proceeding. case reserveExhausted: c.stats.sessionExhausted() log.Debugf("Session %s exhausted", c.sessionQueue.ID()) // This task left the session exhausted, set it to nil and // proceed to the next loop so we can consume another // pre-negotiated session or request another. c.sessionQueue = nil } } // taskRejected process the rejection of a task by a sessionQueue depending on // the state the was in *before* the task was rejected. The client's prevTask // will cache the task if the sessionQueue was exhausted before hand, and nil // the sessionQueue to find a new session. If the sessionQueue was not // exhausted, the client marks the task as ineligible, as this implies we // couldn't construct a valid justice transaction given the session's policy. func (c *TowerClient) taskRejected(task *backupTask, curStatus reserveStatus) { switch curStatus { // The sessionQueue has available capacity but the task was rejected, // this indicates that the task was ineligible for backup. case reserveAvailable: c.stats.taskIneligible() log.Infof("Ignoring ineligible %v", task.id) err := c.cfg.DB.MarkBackupIneligible( task.id.ChanID, task.id.CommitHeight, ) if err != nil { log.Errorf("Unable to mark %v ineligible: %v", task.id, err) // It is safe to not handle this error, even if we could // not persist the result. At worst, this task may be // reprocessed on a subsequent start up, and will either // succeed do a change in session parameters or fail in // the same manner. } // If this task was rejected *and* the session had available // capacity, we discard anything held in the prevTask. Either it // was nil before, or is the task which was just rejected. c.prevTask = nil // The sessionQueue rejected the task because it is full, we will stash // this task and try to add it to the next available sessionQueue. case reserveExhausted: c.stats.sessionExhausted() log.Debugf("Session %v exhausted, %v queued for next session", c.sessionQueue.ID(), task.id) // Cache the task that we pulled off, so that we can process it // once a new session queue is available. c.sessionQueue = nil c.prevTask = task } } // dial connects the peer at addr using privKey as our secret key for the // connection. The connection will use the configured Net's resolver to resolve // the address for either Tor or clear net connections. func (c *TowerClient) dial(privKey *btcec.PrivateKey, addr *lnwire.NetAddress) (wtserver.Peer, error) { return c.cfg.AuthDial(privKey, addr, c.cfg.Dial) } // readMessage receives and parses the next message from the given Peer. An // error is returned if a message is not received before the server's read // timeout, the read off the wire failed, or the message could not be // deserialized. func (c *TowerClient) readMessage(peer wtserver.Peer) (wtwire.Message, error) { // Set a read timeout to ensure we drop the connection if nothing is // received in a timely manner. err := peer.SetReadDeadline(time.Now().Add(c.cfg.ReadTimeout)) if err != nil { err = fmt.Errorf("unable to set read deadline: %v", err) log.Errorf("Unable to read msg: %v", err) return nil, err } // Pull the next message off the wire, rawMsg, err := peer.ReadNextMessage() if err != nil { err = fmt.Errorf("unable to read message: %v", err) log.Errorf("Unable to read msg: %v", err) return nil, err } // Parse the received message according to the watchtower wire // specification. msgReader := bytes.NewReader(rawMsg) msg, err := wtwire.ReadMessage(msgReader, 0) if err != nil { err = fmt.Errorf("unable to parse message: %v", err) log.Errorf("Unable to read msg: %v", err) return nil, err } logMessage(peer, msg, true) return msg, nil } // sendMessage sends a watchtower wire message to the target peer. func (c *TowerClient) sendMessage(peer wtserver.Peer, msg wtwire.Message) error { // Encode the next wire message into the buffer. // TODO(conner): use buffer pool var b bytes.Buffer _, err := wtwire.WriteMessage(&b, msg, 0) if err != nil { err = fmt.Errorf("Unable to encode msg: %v", err) log.Errorf("Unable to send msg: %v", err) return err } // Set the write deadline for the connection, ensuring we drop the // connection if nothing is sent in a timely manner. err = peer.SetWriteDeadline(time.Now().Add(c.cfg.WriteTimeout)) if err != nil { err = fmt.Errorf("unable to set write deadline: %v", err) log.Errorf("Unable to send msg: %v", err) return err } logMessage(peer, msg, false) // Write out the full message to the remote peer. _, err = peer.Write(b.Bytes()) if err != nil { log.Errorf("Unable to send msg: %v", err) } return err } // newSessionQueue creates a sessionQueue from a ClientSession loaded from the // database and supplying it with the resources needed by the client. func (c *TowerClient) newSessionQueue(s *wtdb.ClientSession) *sessionQueue { return newSessionQueue(&sessionQueueConfig{ ClientSession: s, ChainHash: c.cfg.ChainHash, Dial: c.dial, ReadMessage: c.readMessage, SendMessage: c.sendMessage, Signer: c.cfg.Signer, DB: c.cfg.DB, MinBackoff: c.cfg.MinBackoff, MaxBackoff: c.cfg.MaxBackoff, }) } // getOrInitActiveQueue checks the activeSessions set for a sessionQueue for the // passed ClientSession. If it exists, the active sessionQueue is returned. // Otherwise a new sessionQueue is initialized and added to the set. func (c *TowerClient) getOrInitActiveQueue(s *wtdb.ClientSession) *sessionQueue { if sq, ok := c.activeSessions[s.ID]; ok { return sq } return c.initActiveQueue(s) } // initActiveQueue creates a new sessionQueue from the passed ClientSession, // adds the sessionQueue to the activeSessions set, and starts the sessionQueue // so that it can deliver any committed updates or begin accepting newly // assigned tasks. func (c *TowerClient) initActiveQueue(s *wtdb.ClientSession) *sessionQueue { // Initialize the session queue, providing it with all of the resources // it requires from the client instance. sq := c.newSessionQueue(s) // Add the session queue as an active session so that we remember to // stop it on shutdown. c.activeSessions.Add(sq) // Start the queue so that it can be active in processing newly assigned // tasks or to upload previously committed updates. sq.Start() return sq } // logMessage writes information about a message received from a remote peer, // using directional prepositions to signal whether the message was sent or // received. func logMessage(peer wtserver.Peer, msg wtwire.Message, read bool) { var action = "Received" var preposition = "from" if !read { action = "Sending" preposition = "to" } summary := wtwire.MessageSummary(msg) if len(summary) > 0 { summary = "(" + summary + ")" } log.Debugf("%s %s%v %s %x@%s", action, msg.MsgType(), summary, preposition, peer.RemotePub().SerializeCompressed(), peer.RemoteAddr()) }