This commit adds multi-client support for confirmation notification of
the same transaction. Within the daemon there might be scenarios where
multiple goroutines are waiting for the same transaction to be
confirmed in order to properly fulfill their tasks. Previously if
multiple clients were registered for the same txid confirmation
notification, then only the client who registered last would receive
the notification.
This commit adds full persistence logic of the current lowest
un-revoked height within each commitment chain. The newly added
channeldb methods for record state transitions within both commitment
chains are now utilized. This un-settled HTLC state is now read upon
initialization, with the proper log entries inserted into the state
update log which reflect the garbage collected log right before the
restart.
A new set of tests have been added to exercise a few edge cases around
HTLC persistence to ensure the in-memory log is properly restored based
on the on-disk snapshot.
This commit splits the previously added RecordChannelDelta method into
two distinct methods: UpdateCommitment and AppendToRevocationLog. The
former method is to be used once the local party revokes their current
commitment, and the latter method to be used once the remote party
revokes their current commitment.
With the addition of the UpdateCommitment method, the active HTLC’s
from the local node’s point of view are now persisted to disk.
Snapshots returned by the channel now also includes the current set of
active HTLC’s. In order to maintain thread safety the channels mutex is
now grabbed within methods which modify/read state but don’t do so
solely via a boltDB transaction.
The tests have been updated to account for the storage of HTLC’s needed
in order to assert proper behavior.
This commit removes the revocation hash/keys from the channel deltas.
In the case of an uncooperative closure, we can efficiently re-generate
the proper elkrem pre-image so this storage was completely unnecessary
This commit implements a state update log which is intended the record
the relevant information for each state transition on disk. For each
state transition a delta should be written recording the new state. A
new method is also provided which is able to retrieve a previous
channel state based on a state update #.
At the moment no measures has been taken to optimize the space
utilization of each update on disk. There are several low-hanging
fruits which can be addressed at a later point. Ultimately the update
log itself should be implemented with an append-only flat file at the
storage level. In any case, the high level abstraction should be able
to maintained independent of differences in the on-disk format itself.
At times when testing one requires access to the logs of a particular
node in order to aide with debugging. Before this commit, one needed to
manually modify the networkHarness code in order to print either the
location of the logs or the logs themselves. With this commit, tests
can now programmatically examine the logs of any node created within
the networkHarness.
It’s worth noting that at times the logs dumped may not be the most up
to date version of the logs files as the logging library employs
intermediate buffering.
This commit removes a flaky assertion within the interaction tests. Due
to differences in final coin selection across tests due to the
pseudo-random nature of map iterations, a single output might be
selected rather than two as we previously expected.
Additionally a duplicate test has been removed, and the locked output tests
simplified a bit.
This commit performs a major refactor of the current wallet,
reservation, and channel code in order to call into a WalletController
implementation rather than directly into btcwallet.
The current set of wallets tests have been modified in order to test
against *all* registered WalletController implementations rather than
only btcwallet. As a result, all future WalletControllers primary need
to ensure that their implementation passes the current set of tests
(which will be expanded into the future), providing an easy path of
integration assurance.
Rather than directly holding the private keys throughout funding and
channel creation, the burden of securing keys has been shifted to the
specified WalletController and Signer interfaces. All signing is done
via the Signer interface rather than directly, increasing flexibility
dramatically.
During channel funding, rather than creating a txscript.Engine to
verify commitment signatures, regular ECDSA sig verification is now
used instead. This is faster and more efficient.
Finally certain fields/methods within ChannelReservation and
LightningChannel have been exposed publicly in order to restrict the
amount of modifications the prior tests needed to undergo in order to
support testing directly agains the WalletController interface.
This commit modifies the elkrem root derivation for each newly created
channel. First a master elkrem root is derived from the rood HD seed
generated from private wallet data. Next, a HKDF is used with the
secret being the master elkrem root.
This file is no longer needed as each implementation of the
WalletController is expected to handle its own set up via an instance
of the WalletDriver factory struct.
This commit adds the first concrete implementation of the
WalletController interface: BtcWallet. This implementation is simply a
series of wrapper functions are the base btcwallet struct.
Additionally, for ease of use both the BlockChain IO and Signer
interface are also implemented by BtcWallet. Finally a new WalletDriver
implementation has been implemented, and will be register by the init()
method within this new package.
This commit revamps the previous WalletController interface, edging it
closer to a more complete version.
Additionally, this commit also introduces two new interfaces:
BlockchainIO, and Singer along with a new factor driver struct, the
WalletDriver.
This BlockChainIO abstracts read-only access to the blockchain, while
the Singer interface abstracts the signing of inputs from the base
wallet paving the way to hardware wallets, air-gapped signing, etc.
Finally, in order to provide an easy method for selecting a particular
concrete implementation of a WalletController interface, the concept of
registering “WalletDriver”s has been introduced. A wallet driver is
essentially the encapsulation of a factory function capable of create a
new instance of a Wallet Controller.
This commit removes the wrapper functions used to rely on the coinset
package for coin selection. In a future commit the prior behavior will
be replaced by a custom coin selection implementation which estimates
the size of the funding transaction.
This commit removes the storage+encryption of private keys within
channeldb. We no longer need to encrypt these secrets before storing as
the base wallet is now expected to retain full control of these secrets
rather than the database.
As a result, we now only store public keys within the database.
This commit removes the EncryptorDecryptor interface, and all related
usage within channeldb. This interface is no longer needed as wallet
specific secrets such as private keys are no longer stored within the
database.
LIGHT-131, LIGHT-140, LIGHT-138
`lncli showroutingtable` may output routing table as image.
Use graphviz for graph rendering.
Add explicit version dependency for tools. Add error checking.
LIGHT-138, LIGHT-141. Due to some issues in sending/receiving parts of lnd,
messages with zero length are not sent. So added some mock content to
NeighborAck. Moved sender/receiver from routing message to wrap message
which contains lnwire routing message.
LIGHT-133, LIGHT-138 Make output of `lncli showrouting table` in
two different formats: table and json.
Instead of sending serialized routing table send list of channels.
This commit fixes some flakiness exhibited in the current basic funding
workflow tests. This test can fail occasionally in resource constrained
environment due to a race condition which arises after Alice learns of
the channel, but Bob is still waiting for Alice’s notification. As a
temporary fix, we now only check Alice’s state for the existence of the
channel.
This commit fixes some flakiness exhibited within the tests on Travis
due to the default behavior of the `go test` command to execute tests
amongst packages in parallel. Since many tests use the `rpctest`
package from `btcd`, many instances of `btcd` would be started at the
same time, with only one being able to grab the port and fully start
up. By forcing tests to be executed serially, this behavior should be
patched.
One downside is that builds on Travis will take longer. Therefore, this
may be a temporary fix a more fundamental fix within the `rpctest`
package is implemented.
This commit modifies the daemon’s initialization within the `lndMain`
method to create an instance of the current default ChainNotifier
outside of the LightningWallet.
At this point, since there are no other implementations of the
ChainNotifier, the current concrete implementation BtcdNotifier is used
by default. In the future, once other ChainNotifier implementations are
in place, config parsing should be fed into a factory function which
creates the proper ChainNotifier implementation.
Finally, several imports have been updated to reflect the change in
package name.
This commit refactors the code within lnwallet interacting with the
ChainNotifier to accept, and call against the implementation rather
than a single concrete implementation.
LightningWallet no longer creates it’s own BtcdNotifier implementation
doing construction, now instead accepting a pre-started `ChainNotifier`
interface. All imports have been updated to reflect the new naming
scheme.
This commit refactors the existing chainntnfns package in order to
allow more easily allow integration into the main system, by allowing
one to gain access to a set of end-to-end tests for a particular
ChainNotifier implementation.
In order to achieve this, the existing set of tests for the only
concrete implementation (`BtcdNoitifer`) have been refactored to test
against all “registered” notifier interfaces registered. This is
achieved by creating the concept of a “driver” for each concrete
`ChainNotifer` implementation. Once a the package of a particular
driver is imported, solely for the side effects, the init() method
automatically registers the driver.
Additionally, the documentation in various areas of the package have
been cleaned up a bit.
This commit adds some new networkHarness helper methods which are
mean’t to reduce the verbosity of the previous basic tests, and also to
enable developers to right tests mote easily five a higher level
interface.
This commit increases the robustness of the current test and also
reduces it’s running time considerably as all “time.Sleep”s have now
been removed.
Rather than sleeping some random amount of time, the test now waits for
a particular async notification to be dispatched before proceeding.
This tightens up the execution of the tests quite a bit.
This commit adds a new feature to the network harness enabling callers
to receive async notifications once a particular transaction is seen on
the network. Such a feature is useful when due to the asynchronous
behavior of node communications.
With this new feature, tests can now wait for a particular transaction
to be seen within the network before proceeding.
This commit updates the response handling of the steaming RPC’s to
account for the fact that multiple messages from the server (state
updates) can now be sent over the stream instead of a single final
update.
Currently, all updates other than the “final” update are ignored by the
cli.
This commit modifies the internal workflow for opening or closing a
channel in order to create a path in which RPC clients can receive
updates. Updates are now communicated via channels from the goroutines
spawned by the RPC server to process the request, and the sub-system
within the daemon that actually executes the request.
With this change clients can now receive updates that the request is
pending (final message has been sent to the target client), or that the
request has been completed. Confirmation related updates have not yet
been implemented as that will require some changes to the ChainNotifier
interface.
This commit speeds up the integration test initialization by launching
the processes of the two seeder nodes concurrently rather than
serially.
Additionally, the harness will now block until the wallets of both the
seeder nodes are fully synced up.
This commit modifies the prior protos to make the open/close channel
RPC commands return the “union” status update rather than a concrete
item of that union directly. With this change, RPC clients can now
receive status updates of the current state of the opening or closing
channel.
This commit fixes the build for version 1.6.3 of golang. In go 1.7, the
“context” package was moved into the standard library, however go 1.6.3
doesn’t have that change, so we must refer to the prior WIP package
until a new version of Go is released.
