This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
In this commit:
* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's
* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.
* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
Run go fmt so config file is formatted correctly. Also rename
newVertex to NewVertex in pathfind_test and notifications_test
as it is now exported from the routing package.
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.
The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.
Also fix a few minor typos.
In this commit, we add a Reset() method to the mockChainView struct.
With this new method tests are able to fully simulate a restart of the
ChannelRouter. This is necessary as the FilteredChainView instances are
assumed to be stateless, and don’t write their state to disk before a
restart.
This commit introduces the requirement specified in BOLT#7,
where we ignore any node announcements for a specific node
if we yet haven't seen any channel announcements where this
node takes part. This is to prevent someone DoS-ing the
network with cheap node announcements. In the router this
is enforced by requiring a call to AddNode(node_id) to
be preceded by an AddEdge(edge_id) call, where node_id is
one of the nodes in edge_id.
Modifies the test cases in `TestEdgeUpdateNotification` and
`TestNodeUpdateNotification` to check for the possibility of notifications
being delivered out of order. This addresses some sporadic failures that
were observed when running the test suite.
I looked through some of the open issues but didn't see any addressing this
issue in particular, but if someone could point me to any relevant issues
that would be much appreciated!
Issue
-----
Currently the test suite validates notifications received in the order they
are submitted. The check fails because the verification of each
notification is statically linked to the order in which they are delivered,
seen
[here](1be4d67ce4/routing/notifications_test.go (L403))
and
[here](1be4d67ce4/routing/notifications_test.go (L499))
in `routing/notifications_test.go`. The notifications are typically
delivered in this order, but causes the test to fail otherwise.
Proposed Changes
-------------------
Construct an index that maps a public key to its corresponding edges and/or
nodes. When a notification is received, use its identifying public key and
the index to look up the edge/node to use for validation. Entries are
removed from the index after they are verified to ensure that the same
entry is validated twice. The logic to dynamically handle the verification
of incoming notifications rests can be found here
[here](https://github.com/cfromknecht/lnd/blob/order-invariant-ntfns/routing/notifications_test.go#L420)
and
[here](https://github.com/cfromknecht/lnd/blob/order-invariant-ntfns/routing/notifications_test.go#L539).
Encountered Errors
--------------------
* `TestEdgeUpdateNotification`: notifications_test.go:379: min HTLC of
edge doesn't match: expected 16.7401473 BTC, got 19.4852751 BTC
* `TestNodeUpdateNotification`: notifications_test.go:485: node identity
keys don't match: expected
027b139b2153ac5f3c83c2022e58b3219297d0fb3170739ee6391cddf2e06fe3e7, got
03921deafb61ee13d18e9d96c3ecd9e572e59c8dbd0bb922b5b6ac609d10fe4ee4
Recreating Failing Behavior
---------------------------
The failures can be somewhat difficult to recreate, I was able to reproduce
them by running the unit tests repeatedly until they showed up. I used the
following commands to bring them out of hiding:
```
./gotest.sh -i
go test -test.v ./routing && while [ $? -eq 0 ]; do go test -test.v ./routing; done
```
I was unable to recreate these errors, or any others in this package, after
making the proposed changes and leaving the script running continuously for
~30 minutes. Previously, I could consistently generate an error after ~20
seconds had elapsed on the latest commit in master at the time of writing:
78f6caf5d2e570fea0e5c05cc440cb7395a99c1d. Moar stability ftw!
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
This commit modifies the processing in the routing package eo new
announcements. Previously, if we cgot a cnew channel announcement but
didn’t yet know of the verses that the chanell connected, the
cnnounacment would be accepted. This behavior was eronoues as if the
channel were to be queried for, the DB query would fail as we would be
unable to retrieve the two nodes involved int he channel.
To avoid such an error case, we will now _reject_ any channel
announcements in which we don’t yet have a valid node announcement for
the connected nodes. This case has been inserted into the handling of
channel announcement, a new test has been added, and finally older
tests have also been updated to ensure that nodes are added to the
database _before_ the edge is.
This commit modifies the routing package to no longer use the
ChainNotifier for pruning the channel graph. Instead, we now use the
FilteredChainView interface to more (from the ChannelRouter’s PoV)
efficiently maintain the channel graph.
Rather than scanning the _entire_ block manually, we now rely on the
FilteredChainView to provide us with FilteredBlocks which include
_only_ the relevant transactions that we care about.
Change the name of fields of messages which are belong to the discovery
subsystem in a such way so they were the same with the names that are
defined in the specification.
Add usage of the 'discovery' package in the lnd, now discovery service
will be handle all lnwire announcement messages and send them to the
remote party.
In this commit the routing package was divided on two separete one,
this was done because 'routing' package start take too much responsibily
on themself, so with following commit:
Routing pacakge:
Enitites:
* channeldb.ChannelEdge
* channeldb.ChannelPolicy
* channeldb.NodeLightning
Responsibilities:
* send topology notification
* find payment paths
* send payment
* apply topology changes to the graph
* prune graph
* validate that funding point exist and corresponds to given one
* to be the source of topology data
Discovery package:
Entities:
* lnwire.AnnounceSignature
* lnwire.ChannelAnnouncement
* lnwire.NodeAnnouncement
* lnwire.ChannelUpdateAnnouncement
Responsibilities:
* validate announcement signatures
* sync topology with newly connected peers
* handle the premature annoucement
* redirect topology changes to the router susbsystem
* broadcast announcement to the rest of the network
* exchange channel announcement proofs
Before that moment all that was in the 'routing' which is quite big for
one subsystem.
split
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
This commit modifies the existing FindRoute method on the ChannelRouter
to now use the KSP implementation added in a prior commit.
This new method FindRoutes, is able to find all the possible paths
between a source and destination. The method takes all paths reported
by findPaths, and attempt to turn each of them into a route. A route
differs from a path in that is has complete time-lock and fee
information. Some paths may not be able to be turned into routes as
once fees are accounted for the have an insufficient flow. We then take
the routes, sort them by total fee (with time-lock being a
time-breaker), then return them in sorted order.
This commit modifies the `ChannelEdgeUpdate` struct to include the
channel point itself within the notifications. Such a change improves
the notificaiton experience for callers as it allows them to filter out
update notifications based on a familiar object within the codebase: a
channel point.
