Commit Graph

190 Commits

Author SHA1 Message Date
Johan T. Halseth
ee257fd0eb
multi: move Route to sub-pkg routing/route 2019-04-29 14:52:33 +02:00
Wilmer Paulino
0b0a9f4172
channeldb+routing: refactor DeleteChannelEdge to use ChannelID
In this commit, we refactor DeleteChannelEdge to use ChannelIDs rather
than ChannelPoints. We do this as the only use of DeleteChannelEdge is
when we are pruning zombie channels from our graph. When running under a
light client, we are unable to obtain the ChannelPoint of each edge due
to the expensive operations required to do so. As a stop-gap, we'll
resort towards using an edge's ChannelID instead, which is already
gossiped between nodes.
2019-04-18 21:57:41 -07:00
Wilmer Paulino
f2637d63ba
routing: prevent fetching blocks for graph edges with AssumeChannelValid
This serves as a stop-gap for light clients as blocks need to be
downloaded from the P2P network, and even with caches, would be too
costly for them to verify. Doing this has two side effects however:
we'll no longer know of the channel capacity and outpoint, which are
essential for some of lnd's responsibilities.
2019-04-18 21:57:37 -07:00
Wilmer Paulino
fd1aa478a9
routing: disable FilteredChainView when AssumeChannelValid is active
In this commit, we disable attempting to determine when a channel has
been closed out on-chain whenever AssumeChannelValid is active. Since
the flag indicates that performing this operation is expensive, we do
this as a temporary optimization until we can include proofs of channels
being closed in the gossip protocol.

With this change, the only way for channels being removed from the graph
will be once they're considered zombies: which can happen when both
edges of a channel have their disabled bits set or when both edges
haven't had an update within the past two weeks.
2019-04-18 21:57:37 -07:00
Wilmer Paulino
7e7b8a1940
routing: prune graph nodes after pruning zombie channels
We do this to ensure we don't leave any stray nodes in our graph that
were part of the zombie channels that we've pruned.
2019-04-18 21:57:36 -07:00
Wilmer Paulino
7eb720e535
routing: mark policy as stale if edge remains double disabled
To ensure we don't mark an edge as live again just because an update
with a fresh timestamp was received, we'll ensure that we reject any
new updates for zombie channels if they remain disabled when running
with AssumeChannelValid.
2019-04-18 21:57:35 -07:00
Wilmer Paulino
f23c3b488e
routing: prune channels with disabled bit set on both edges
In this commit, we add an additional heuristic when running with
AssumeChannelValid. Since AssumeChannelValid being present assumes that
we're not able to quickly determine whether channels are valid, we also
assume that any channels with the disabled bit set on both sides are
considered zombie. This should be relatively safe to do, since the
disabled bits are usually set when the channel is closed on-chain. In
the case that they aren't, we'll have to wait until both edges haven't
had a new update within two weeks to prune them.
2019-04-18 21:57:34 -07:00
Wilmer Paulino
78bdcbb115
routing: prune channels only if both edges are present
We do this to ensure we don't prune too aggressively, as it's possible
that we've only received the channel announcement for a channel, but not
its accompanying channel updates.
2019-04-18 21:57:31 -07:00
Olaoluwa Osuntokun
373927fb3e
Merge pull request #2950 from joostjager/remove-route-cache
routing: remove route cache
2019-04-17 19:34:19 -07:00
Johan T. Halseth
2b9efcbaeb
routing/router: define ErrRouterShuttingDown 2019-04-15 16:55:10 +02:00
Joost Jager
3b94627c12
routing: remove route cache
This commit removes the QueryRoutes route cache. It is causing wrong
routes to be returned because not all of the request parameters are
stored.

The cache allowed high frequency QueryRoutes calls to the same
destination and with the same amount to be returned fast. This behaviour
can also be achieved by caching the request on the client side. In case
a route is invalidated because of for example a channel update,
the subsequent SendToRoute call will fail. This is a trigger to call
QueryRoutes again for a fresh route.
2019-04-13 08:10:32 +02:00
Wilmer Paulino
23796d3247
routing+discovery: extend ChannelGraphSource with zombie index methods 2019-03-27 13:07:30 -07:00
Wilmer Paulino
174645fcba
routing+server: expose DefaultChannelPruneExpiry 2019-03-27 13:07:13 -07:00
Wilmer Paulino
c82d73a826
channeldb+routing: extend edge lookup methods with zombie index check
In this commit, we extend the graph's FetchChannelEdgesByID and
HasChannelEdge methods to also check the zombie index whenever the edge
to be looked up doesn't exist within the edge index. We do this to
signal to callers that the edge is known, but only as a zombie, and the
only information that we have about the edge are the node public keys of
the two parties involved in the edge.

In the event that an edge does exist within the zombie index, we make
an additional check on edge policies to ensure they are not within the
router's pruning window, indicating that it is a fresh update.
2019-03-27 13:06:57 -07:00
Joost Jager
06cd64cbbc
routing: add cltv limit to payment session 2019-03-19 10:36:51 +01:00
Joost Jager
2be1051fb6
zpay32: move HopHint and DefaultFinalCLTVDelta 2019-03-15 10:08:32 +01:00
Joost Jager
6cc82b4a34
routing: add todo describing route cache bug 2019-03-06 15:31:09 +01:00
Joost Jager
c62c9d64da
routing: add source parameter to query routes
This commit allows execution of QueryRoutes from any source node.
Previously this was restricted to only the self node.
2019-03-06 15:31:03 +01:00
Joost Jager
7719bc432f
routing: take Vertex types as path finding source and target nodes
Currently public keys are represented either as a 33-byte array (Vertex) or as a
btcec.PublicKey struct. The latter isn't useable as index into maps and
cannot be used easily in compares. Therefore the 33-byte array
representation is used predominantly throughout the code base.

This commit converts the argument types of source and target nodes for
path finding to Vertex. Path finding executes no crypto operations and
using Vertex simplifies the code.

Additionally, it prepares for the path finding source parameter to be
exposed over rpc in a follow up commit without requiring conversion back
and forth between Vertex and btcec.PublicKey.
2019-03-06 15:31:00 +01:00
Joost Jager
b09adc3219
lnrpc+routing: add edges and nodes restrictions to query routes
This commit allows the execution of QueryRoutes to be controlled using
lists of black-listed edges and nodes. Any path returned will not pass
through the edges and/or nodes on the list.
2019-03-06 15:30:57 +01:00
Joost Jager
b2b28b49b1
routing: export RestrictParams and EdgeLocator 2019-03-06 15:30:52 +01:00
Joost Jager
4937304732
routing: remove redundant fee limit check in newRoute
This check was a left over from when the fee limit wasn't checked yet in
the path finding algorithm.
2019-03-06 15:30:49 +01:00
Johan T. Halseth
cee18892b5
Merge pull request #2565 from joostjager/sendpayment-refactor
routing: sendPayment broken down into multiple functions
2019-03-06 10:20:20 +01:00
Johan T. Halseth
23ce82f4e3
routing/router: don't apply channel policy updates for unknown channels 2019-02-14 14:21:18 +01:00
Johan T. Halseth
1259bacd49
routing: remove unused code, nodeIndex and chanIndex 2019-02-13 12:23:45 +01:00
Joost Jager
f8721ffbca
routing: sendPayment broken down into multiple functions 2019-02-11 08:42:41 +01:00
Joost Jager
7c30a8c493
routing: add outgoing channel restriction 2019-02-08 23:05:56 +01:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
orbitalturtle
08750f180b multi: deprecate IncorrectHtlcAmount onion error
In this commit, we deprecate the `IncorrectHtlcAmount` onion error.
We'll still decode this error to use when retrying paths, but we'll no
longer send this ourselves. The `UnknownPaymentHash` error has been
amended to also include the value of the payment as well. This allows us
to worry about one less error.
2019-01-29 18:21:13 -08:00
Valentine Wallace
cced754659
routing/router: when applying onion failure channel update, set max htlc
In this commit, we ensure that when we update an edge
as a result of a ChannelUpdate being returned from an
onion failure, the max htlc portion of the channel update
is included in the edge update.
2019-01-22 08:42:29 +01:00
Valentine Wallace
15168c391e
discovery+routing: validate msg flags and max htlc in ChannelUpdates
In this commit, we alter the ValidateChannelUpdateAnn function in
ann_validation to validate a remote ChannelUpdate's message flags
and max HTLC field. If the message flag is set but the max HTLC
field is not set or vice versa, the ChannelUpdate fails validation.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2019-01-22 08:42:27 +01:00
Valentine Wallace
0fd6004958
multi: partition lnwire.ChanUpdateFlag into ChannelFlags and MessageFlags
In this commit:

* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's

* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.

* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2019-01-22 08:42:26 +01:00
Conner Fromknecht
a5b22788bf
routing/router: avoid naked spew of channel policies 2019-01-09 23:54:41 -08:00
Johan T. Halseth
81fe6e73ed
router+graph: return ErrGraphNodesNotFound if no nodes to prune
Avoids creating a bucket unneccessarily.
2018-12-06 10:22:15 +01:00
Joost Jager
3ed16837e4
routing: prune channels unidirectional
In this commit we introduce pruning of channel edges instead of channels.
Channel failures apply to a single direction and it is unnecessarily
restricting to prune both directions.
2018-12-05 14:39:23 +01:00
Joost Jager
8b8e82a171
routing: remove route hop maps
Hop maps were used in a test to verify the population of the hop map
itself and further only in a single function (getFailedChannelID).
Rewrote that function and removed the hop maps completely.
2018-12-05 14:39:23 +01:00
Olaoluwa Osuntokun
5075394617
Merge pull request #1706 from joostjager/errorprocessing
routing: make routing retry behaviour consistent
2018-12-03 18:29:07 -08:00
Joost Jager
b6ce03e569
routing: make routing retry behaviour consistent
Fixes the following issues:
- If the channel update of FailFeeInsufficient contains an invalid channel
  update, it is not possible to properly add to the failed channels set.
- FailAmountBelowMinimum may apply a channel update, but does not retry.
- FailIncorrectCltvExpiry immediately prunes the vertex without
  trying one more time.

In this commit, the logic for all three policy related errors is
aligned.
2018-12-03 13:23:27 +01:00
Olaoluwa Osuntokun
1fd3aac925
multi: switch from bolt packge to bbolt package for all imports 2018-11-29 20:33:49 -08:00
Joost Jager
6ba1144528
routing: move failed channels map into payment session
This is a small preparatory step towards moving mission control logic
out of router and reusing the acquired routing result data.
2018-11-29 10:31:38 +01:00
Joost Jager
71037969b7
routing: remove pruneVertexFailure function 2018-11-29 10:31:38 +01:00
Joost Jager
aca136a91c
routing: remove unused pruneVertexFailure parameters 2018-11-29 10:31:38 +01:00
Joost Jager
dd7e2e9e04
routing: move logging into applyChannelUpdate
To remove code duplicated at all call sites to check err and log.
2018-11-29 10:31:38 +01:00
Wilmer Paulino
4f45e339f1
discovery+routing: add FetchLightningNode to ChannelGraphSource interface 2018-11-11 17:48:05 -08:00
Wilmer Paulino
18ecb31983
routing/router: extend ChannelGraphSource interface with IsPublicNode
method
2018-10-24 17:28:54 -07:00
Olaoluwa Osuntokun
fbd91feace
Merge pull request #1888 from joostjager/routestruct
lnrpc+routing: fix unmarshallRoute and simplify route structure
2018-10-23 17:07:23 -07:00
Joost Jager
1d97cf1229
htlcswitch+routing: implement expiry_too_far failure
In this commit we add a check to HtlcSatifiesPolicy to verify that the
time lock for the outgoing htlc that is requested in the onion packet
isn't too far in the future.

Without this check, anyone could force an unreasonably long time lock on
the forwarding node.
2018-10-15 08:51:08 +02:00
Joost Jager
a779004a18
lnrpc+routing: fix issues with missing data in unmarshallRoute
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.

In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
2018-10-13 22:59:23 +02:00
Joost Jager
a7fec827cc
routing: validate channel update in failure message 2018-09-11 20:12:09 +02:00
Conner Fromknecht
1e473b2364
routing/router: add assume chan valid 2018-09-03 20:15:12 -07:00