- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
In this commit, we modify the logic for the two primary payment related
RPCs to reduce duplication, indentation, and consolidate logic. As a
result, we'll now accept rpcPaymentIntents, turn those into regular
paymentIntents (convert from proto) before finally dispatching via
unified function.
In this commit, we now allow connections to onion addresses due to
recently adding support to properly parse them.
Co-Authored-By: Eugene <crypt-iq@users.noreply.github.com>
In this commit, we fix an existing panic bug related to the recently
added routing hints feature. If it's the case that the remote node
didn't send us their edge, then when we go to compare the public keys to
see if they match, we may attempt to deref an nil pointer.
In order to fix this, we'll instead check the edgeInfo, which is
guaranteed to also exist if the channel was found in the database. As a
defensive step, before we go to actually aces the struct, we'll check
that's it's non-nil and proceed if it is nil.
In this commit, we modify the SignMessage+VerifyMessage slightly in
order to bind the message we're signing to our specific context. We do
this by pre-pending the ascii text "Lightning Signed Message:" to the
msg before we run it through dsha256. Adding this prefix binds the
message to our context in order to avoid accidentally signing a sighash
or the like.
In this commit, we avoid hitting a possible panic in the case that we
were unable to retrieve the link of a channel from the HTLC switch while
determining which channels should be used as routing hints for an
invoice.
This reverts commit 0f90c950daaec7843e305f32d10e36411fb0b47f.
We actually still need to notify the BRAR of a force close, as
otherwise, it doesn't have a signal to exit due to a local force close
event.
This commit fixes a bug where all the HTLC rhash slices in a
ListChannelsResponse would be tied to the loop variable, making them all
take the hash of the last HTLC in the list. This commit fixes it by
making a copy of the slice.
In this commit, we update the testUpdateChannelPolicy to exercise the
recent set of changes within the switch. If one applies this test to a
fresh branch (without those new changes) it should fail. This is due to
the fact that before, Bob would attempt to apply the constraints of the
incoming link (which we updated) instead of the outgoing link. With the
recent set of changes, the test now properly passes.
In this commit, we follow up to the prior commit by ensuring we won't
accept a co-op close request for a chennel with active HTLCs. When
creating a chanCloser for the first time, we'll check the set of HTLC's
and reject a request (by sending a wire error) if the target channel
still as active HTLC's.
In this commit, we fix a bug that at times could cause any dangling
HTLC's to be sent to miner's fees if a user attempted to close out a
channel cooperatively that still had pending HTLC's. We'll first prevent
this at the RPC level by rejecting any attempts to trigger a co-op
channel closure while a channel still have dangling HTLC's.
In this commit, we modify the existing invoice RPC macaroon permissions
to target a more specific entity: “invoices”. As a result of this
commit, once node operators update, they’ll need to regenerate their
readonly.macaroon as it now needs this additional entity encoded within
it.
In the prior commit, we added a new set of permissions and also a new
entity: “invoices”. We’ll add this set of entities to the read and
write permissions accordingly as well to ensure that the existing
macaroons have access to all the items that the invoice.macaroon does.
In this commit, we add a new invoicePermissions slice. This contains
all the permission that a holder of an invoice.macaroon is able to
access, and no others. We also include read and write access to
addresses as this may be useful from the PoV of a merchant or exchange.
In this commit, we raise the min channel size to 20k satoshis. This
will be evaluated before we check for dusty commitments. The goal of
this is to ensure ample room for fees at current, and future fee
levels.
In this commit, we fix a bug in the query routes RPC that could at
times lead to a panic. This would happen if the number of returned
routes was less than the number of expected routes. To remedy this,
we’ll return the minimum of the number of requested routes, and the
number of routes actually returned.
This commit adds wallet_best_block_timestamp to the gRPC interface.
This is done in order to allow clients to calculate progress while
lnd syncs to the blockchain. wallet_best_block_timestamp is exposed
via the GetInfo() rpc call. Additionally, IsSynced() returns the
WalletBestBlockTimestamp as the second value in the tuple
that is returned, providing additional detail when querying about the
status of the sync. The BtcWallet interface has also been updated
accordingly.
This commit was created to support the issue to
[Add progress bar for chain sync] (lightninglabs/lightning-app#10) in
lightning-app
This commit adds a new interface named NetInterface and two
implementations of it: RegularNet & TorProxyNet. These two structs
are used in config.go in an attempt to clean up the code and
abstract away the dialer and DNS functions.
This commit adds Tor support. Users can set the --TorSocks flag
to specify which port Tor's SOCKS5 proxy is listening on so that
lnd can connect to it. When this flag is set, ALL traffic gets
routed over Tor including DNS traffic. Special functions for
DNS lookups were added, and since Tor doesn't natively support
SRV requests, the proxySRV function routes connects us to
a DNS server via Tor and SRV requests can be issued directly
to the DNS server.
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
This commit reworks the macaroon authentication framework to use the
v2 macaroon format and bakery API. It also replaces the code in each
RPC method which calls the macaroon verifier with interceptors which
call the macaroon verifier instead. In addition, the operation
permissions are reworked to fit the new format of "allow" commands
(specifically, entity/operation permissions instead of method
permissions).
Since a ChannelPoint's funding txid can now be get/set as raw bytes or
a string, we first need to check what type it's currently set to before
accessing it.
Fixes#481.
Prior to this commit, payments stored in the channel DB only kept a
record of the payment hash. This is a problem as the preimage is what
serves as proof of payment and a user should be able to look up this
value in the future (not just immediately after payment).
Instead of storing both the payment hash and the preimage, we store the
preimage only since the hash can be derrived from this using a SHA256.
In the RPC listpayments command, we now give the preimage in addition to
the payment hash.
We no longer need to hand off new channels that come online as the
chainWatcher will be persistent, and always have an active signal for
the entire lifetime of the channel.
This commit changes the name of the UpdateFee method to
UpdateChannelPolicy, to mimic the recent proto change.
It also reads and validates the passed TimeLockDelta,
and sends it to the gossiper for announcing it to the
network, and to the switch for updating the forwarding
policy of the links.
In this commit, we remove the blocks_till_open from
PendingChannelsResponse as in its current state, the values that are
assigned to this field don’t accurately reflect the naming. This has
caused a good bit of confusion amongst users lately. As a result, we’re
temporarily removing this field until we have proper incremental
notifications within the chain notifier.
In this commit we rename the lnrpc.PendingChannelRequest and
lnrpc.PendingChannelResponse to
lnrpc.PendingChannelsRequest/lnrpc.PendingChannelsResponse. We do this
as we strive to ensure that the naming scheme across the RPC interface
is consistent.
On testate as times the fee estimation can swing widely. As we
currently don’t yet use vsize everywhere internally, we’re forced to
manually scale to weight for the moment. If the returned fee rate is
too low, then it can cause our estimate to go to zero. This also has
the effect of meaning that the chanCloser doesn’t currently advance if
the initial starting fee is zero.
In this commit we fix a cosmetic bug within our RPC output for list
channels. We have a policy of always showing SAT instead of mSAT
externally. This led to user confusion, as if Alice or Bob ended up
with a fractional amount of satoshis, then the sum of trimmed amount
would be silently sent to miner’s fees. An example being: Alice ending
up with `8998999 mSAT` (`8998.999 SAT`). Bob similarly ends up with
`1001001 mSAT` (`1001.001 SAT`). `8998.999 + 1001.001 = 10000.0 SAT`.
However, we can't express that fractional amount (totaling `1 SAT`
across both commitment transactions) so it goes to miner fees.
To remedy this on the RPC interface level, we’ll now detect if we have
a dangling satoshi, and properly list it as going towards the miner fee
on the commitment transaction.
Fixes#468.
