This commit adds the FeeEstimator interface, which can be used for
future fee calculation implementations. Currently, there is only the
StaticFeeEstimator implementation, which returns the same fee rate for
any transaction.
This commit fixes a bug that was introduced when the connection
handling was re-worked to properly handle the case of concurrent
connections being made. In certain cases after a successful initial
connection, a peer’s stray goroutine would still attempt to establish a
second outbound connection even though a connection had already been
established. This was properly handled by the connecting peer, but not
he receiving peer. This commit adds the additional logic to the
receiving peer to ensure that we properly handle this case.
In this commit waiting proofs array have been replaced with persistant
boltd storage which removes the possibility for the half proof to be
lost during half proof exchange.
This commit modifies the implementation of the new DisconnectPeer RPC
in the following ways:
* all validation has moved from the server to the rpcserver
* rather than iterating over _all_ channels, we now only check the
peer’s channels
* the disconnectPeerMsg now has a public key object
* this allows us to also verify that the user submitted a valid
pub key string
* we now check if a peer was persistent when disconnecting so we can
remove them from the persistent peer map
This commit fixes a prior bug wherein if a user connected to a peer
using the —perm command, then once the peer was disconnected, we
wouldn’t automatically connect to them.
Issue: 139
This commit contains client-side and server-side functionality
for disconnecting peers. rpc-client calls server side method and sends
message with pubKey.
This commit fixes a bug that was introduced when the concurrent
connection handling logic was re-written: if we don’t properly add the
persistent outbound connection to the persistent conn reqs map. The fix
is easy: add the pending conn req to the proper map.
This commit fixes a bug that would possibly result in tens of goroutine
beaching launched in an attempt to persistently connect to a peer. This
bug has been fixed by ensuring that we’ll only launch a new pending
connection attempt if we don’t already have one pending.
The prior methods we employed to handle persistent connections could
result in the following situation: both peers come up, and
_concurrently_ establish connection to each other. With the prior
logic, at this point, both connections would be terminated as each peer
would go to kill the connection of the other peer. In order to resolve
this issue in this commit, we’ve re-written the way we handle
persistent connections.
The eliminate the issue described above, in the case of concurrent peer
connection, we now use a deterministic method to decide _which_
connection should be closed. The following rule governs which
connection should be closed: the connection of the peer with the
“smaller” public key should be closed. With this rule we now avoid the
issue described above.
Additionally, each peer now gains a peerTerminationWatcher which waits
until a peer has been disconnected, and then cleans up all resources
allocated to the peer, notifies relevant sub-systems of its demise, and
finally handles re-connecting to the peer if it's persistent. This
replaces the goroutine that was spawned in the old version of
peer.Disconnect().
This commit re-writes the GetNetworkInfo implenetaiton to use a single
database transaction. We’re now able to do this due to the recent
change in the API for the ChannelGraph struct and it’s related objects.
The recent change allows the passed callback to accept a db
transaction, with this, the callback is now able to issue another
traversal routine _within_ the prior one.
This commit modifies the fundingManager config to use the a SignMesage
function rather than two distinct functions for singing one half the
channel announcement proofs. This change unifies the signing of
messages under a single abstraction: the MessageSigner interface.
This commit eliminates a possible deadlock (or repeated peer connection
failures) that can arise due to the [inbound|outbound]PeerConnected
methods holding the peer mutex too long. We now alleviate this
concurrency issue by calling s.peerConnected in an asynchronous manner.
This is safe as all operations within the method are themselves
goroutine-safe.
This commit implements some minor coding style, commenting and naming
clean up after the recent major discovery service was merged into the
codebase.
Highlights of the naming changes:
* fundingManager.SendToDiscovery -> SendAnnouncement
* discovery.Discovery -> discovery.AuthenticatedGossiper
The rest of the changes consist primary of grammar fixes and proper
column wrapping.
Add usage of the 'discovery' package in the lnd, now discovery service
will be handle all lnwire announcement messages and send them to the
remote party.
This commit modifies the logic around the opening p2p handshake to
enforce a strict timeout around the receipt of the responding init
message. Before this commit, it was possible for the daemon and certain
RPC calls to deadlock as if a peer connected, but didn’t respond with
an init msg, then we’d be sitting there waiting for them to respond.
With this commit, we’ll now time out, kill the connection and then
possible attempt to re-connect if the connection was persistent.
Use addresses and ports from NodeAnnouncement messages for reconnection
attempts. For those nodes that don't explicitly report IP addresses, use
the IP address from previous connections connection request along with
the default peer port number.
Minor change to server.go to add ExternalIPs to
channeldb.LightningNode. Also, added a test that utilizes this
functionality and exercises multiple addresses in NodeAnnouncement.
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
If an error occurs during, peer initialization then 'p' is nil. This
may cause a panic while accessing the peer's member
variables.
To avoid such panics, we now omit the call to `p.Disconnect`
and also directly access the `connmgr.ConReq` variable if it's
non-nil.
This commit removes all instances of the fastsha256 library and
replaces it with the sha256 library in the standard library. This
change should see a number of performance improvements as the standard
library has highly optimized assembly instructions with use vectorized
instructions as the platform supports.
This commit renames routing processing method in the funding mangers
config from ProcessRoutingMessage to SendToRouter and also modifies the
signature to only require the message itself and not the server’s
identity public key.
When the funding transaction has been confirmed, the FundingLocked
message is sent by the peers to each other so that the existence of the
newly funded channel can be announced to the network.
This commit also removes the SingleFundingOpenProof message.
Once a channel funding process has advanced to the point of broadcasting
the funding transaction, the state of the channel should be persisted
so that the nodes can disconnect or go down without having to wait for the
funding transaction to be confirmed on the blockchain.
Previously, the finalization of the funding process was handled by a
combination of the funding manager, the peer and the wallet, but if
the remote peer is no longer online or no longer connected, this flow
will no longer work. This commit moves all funding steps following
the transaction broadcast into the funding manager, which is available
as long as the daemon is running.
github.com/lightningnetwork/lnd master ✗
0m ◒
▶ golint
htlcswitch.go:292:4: should replace numUpdates += 1 with numUpdates++
htlcswitch.go:554:6: var onionId should be onionID
htlcswitch.go:629:7: var onionId should be onionID
lnd_test.go:133:1: context.Context should be the first parameter of a
function
lnd_test.go:177:1: context.Context should be the first parameter of a
function
networktest.go:84:2: struct field nodeId should be nodeID
peer.go:1704:16: should omit 2nd value from range; this loop is
equivalent to `for invoice := range ...`
rpcserver.go:57:6: func newRpcServer should be newRPCServer
github.com/lightningnetwork/lnd master ✗
9m ⚑ ◒ ⍉
▶ go vet
features.go:12: github.com/lightningnetwork/lnd/lnwire.Feature
composite literal uses unkeyed fields
fundingmanager.go:380: no formatting directive in Errorf call
exit status 1
Previously, during the channel funding process, peers sent wire
messages using peer.queueMsg. By switching to server.sendToPeer, the
fundingManager is more resilient to network connection issues or system
restarts during the funding process. With server.sendToPeer, if a peer
gets disconnected, the daemon can attempt to reconnect and continue the
process using the peer’s public key ID.
This commit prevent unnecessary connection flapping by ensure we don’t
attempt to auto-connect to a peer that we’re unable to create or start
the goroutines of. With this commit, we won’t attempt to auto-connect
to a peer that has incompatible feature sets to that of ours.
In this commit the support for global and local feature vectors were
added in 'server' and 'peer' structures respectively. Also with commit
additional logic was added and now node waits to receive 'init'
lnwire.Message before sending/responding on any other messages.
This commit modifies the existing syncing logic to launch a new
goroutine on connect to synchronize graph state with the new peer
rather than the prior blocking version. This change should make the
initial sync a little snappier and also possible eliminate a circular
dependency between the ChannelRouter and the server.
This commit moves much of the logic for querying for a potential route,
constructing the HTLC including the Sphinx packet, and sending the
ultimate payment from the rpcServer to the ChannelRouter.
This movement paves the way for muilt-path path finding as well as
adding automatic retry logic to the ChannelRouter. Additionally, by
having the ChannelRouter construct the Sphinx packet, we’ll be able to
also include the proper time-lock and general per-hop-payload
information properly in the future.
