Commit Graph

69 Commits

Author SHA1 Message Date
Wilmer Paulino
f23c3b488e
routing: prune channels with disabled bit set on both edges
In this commit, we add an additional heuristic when running with
AssumeChannelValid. Since AssumeChannelValid being present assumes that
we're not able to quickly determine whether channels are valid, we also
assume that any channels with the disabled bit set on both sides are
considered zombie. This should be relatively safe to do, since the
disabled bits are usually set when the channel is closed on-chain. In
the case that they aren't, we'll have to wait until both edges haven't
had a new update within two weeks to prune them.
2019-04-18 21:57:34 -07:00
Wilmer Paulino
78bdcbb115
routing: prune channels only if both edges are present
We do this to ensure we don't prune too aggressively, as it's possible
that we've only received the channel announcement for a channel, but not
its accompanying channel updates.
2019-04-18 21:57:31 -07:00
Wilmer Paulino
c82d73a826
channeldb+routing: extend edge lookup methods with zombie index check
In this commit, we extend the graph's FetchChannelEdgesByID and
HasChannelEdge methods to also check the zombie index whenever the edge
to be looked up doesn't exist within the edge index. We do this to
signal to callers that the edge is known, but only as a zombie, and the
only information that we have about the edge are the node public keys of
the two parties involved in the edge.

In the event that an edge does exist within the zombie index, we make
an additional check on edge policies to ensure they are not within the
router's pruning window, indicating that it is a fresh update.
2019-03-27 13:06:57 -07:00
Joost Jager
2be1051fb6
zpay32: move HopHint and DefaultFinalCLTVDelta 2019-03-15 10:08:32 +01:00
Joost Jager
c62c9d64da
routing: add source parameter to query routes
This commit allows execution of QueryRoutes from any source node.
Previously this was restricted to only the self node.
2019-03-06 15:31:03 +01:00
Joost Jager
7719bc432f
routing: take Vertex types as path finding source and target nodes
Currently public keys are represented either as a 33-byte array (Vertex) or as a
btcec.PublicKey struct. The latter isn't useable as index into maps and
cannot be used easily in compares. Therefore the 33-byte array
representation is used predominantly throughout the code base.

This commit converts the argument types of source and target nodes for
path finding to Vertex. Path finding executes no crypto operations and
using Vertex simplifies the code.

Additionally, it prepares for the path finding source parameter to be
exposed over rpc in a follow up commit without requiring conversion back
and forth between Vertex and btcec.PublicKey.
2019-03-06 15:31:00 +01:00
Joost Jager
b09adc3219
lnrpc+routing: add edges and nodes restrictions to query routes
This commit allows the execution of QueryRoutes to be controlled using
lists of black-listed edges and nodes. Any path returned will not pass
through the edges and/or nodes on the list.
2019-03-06 15:30:57 +01:00
Joost Jager
4376f3e1bd
routing: allow nil maps for ignored edges and nodes
This allows removing a lot of empty map initialization code and makes
the code more readable.
2019-03-06 15:30:54 +01:00
Joost Jager
b2b28b49b1
routing: export RestrictParams and EdgeLocator 2019-03-06 15:30:52 +01:00
Valentine Wallace
348a66ed13 routing: update test edge policy fields to include max htlc + new flags
Since the MaxHTLC field was recently added to the ChannelEdgePolicy struct,
and the Flags field was broken into ChannelFlags and MessageFlags, the
test edge policies should be updated accordingly.
2019-03-01 08:05:27 -08:00
Johan T. Halseth
01ea797d78
routing/router test: add TestIgnoreChannelEdgePolicyForUnknownChannel 2019-02-14 14:21:18 +01:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
Valentine Wallace
0fd6004958
multi: partition lnwire.ChanUpdateFlag into ChannelFlags and MessageFlags
In this commit:

* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's

* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.

* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2019-01-22 08:42:26 +01:00
Olaoluwa Osuntokun
11c24d3e0f
Merge pull request #1745 from halseth/channeldb-avoid-create-buckets
channeldb: avoid creating empty buckets
2018-12-17 20:01:29 -08:00
Joost Jager
b2cb760c65
routing: check for empty hops list
This commit fixes a crash that could be triggered by sending an empty
hop list to the SendToRoute rpc.
2018-12-10 11:27:07 +01:00
Johan T. Halseth
87df6b71c5
router test: only cleanup if context creation succeeds 2018-12-06 10:22:15 +01:00
Joost Jager
3ed16837e4
routing: prune channels unidirectional
In this commit we introduce pruning of channel edges instead of channels.
Channel failures apply to a single direction and it is unnecessarily
restricting to prune both directions.
2018-12-05 14:39:23 +01:00
Johan T. Halseth
20b9d5d000
routing: define graphParams and restrictParams
To avoid the findPath parameter list getting out of hand, we define new
structs that wraps the mandatory and optional parameters to findPath.
2018-12-04 12:20:44 +01:00
Joost Jager
ac04729cff
routing: use complete route in test
Previously not all route fields were properly populated. Example: prev
and next hop maps.
2018-11-29 10:31:38 +01:00
Joost Jager
a779004a18
lnrpc+routing: fix issues with missing data in unmarshallRoute
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.

In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
2018-10-13 22:59:23 +02:00
Olaoluwa Osuntokun
6afee3d099
Merge pull request #1856 from maurycy/typos
multi: fix various typos in comments
2018-09-27 20:38:10 -07:00
Joost Jager
ac8a3af84c
routing: add channel update validation test 2018-09-11 20:10:15 +02:00
Joost Jager
5daf75b264
routing: restructure test context creation 2018-09-11 20:10:14 +02:00
Joost Jager
2d255e3bc3
routing: use fixed time value in tests 2018-09-11 20:10:14 +02:00
maurycy
ac24b12bf2
multi: fix various typos in comments 2018-09-07 06:51:49 +02:00
Wilmer Paulino
6c903393e5 router+server: use first hop channel id rather than node key 2018-08-20 21:04:52 -07:00
Joost Jager
3e7473f4f0 routing: backward searching 2018-08-09 20:23:40 -07:00
Olaoluwa Osuntokun
c903a9a711
routing: add new TestEmptyRoutesGenerateSphinxPacket test 2018-07-30 13:40:25 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Wilmer Paulino
ddf8f2cb01
routing: allow specifying a fee limit during route construction 2018-06-12 18:14:48 -07:00
Sebastian Delgado
6746609ec6
Add constant and percentage-based fee limits to payments
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
2018-06-12 18:14:43 -07:00
Olaoluwa Osuntokun
f494433cbf
routing+server: add new QueryBandwidth method to reduce outbound failures
In this commit, we introduce a new method to the channel router's config
struct: QueryBandwidth. This method allows the channel router to query
for the up-to-date available bandwidth of a particular link. In the case
that this link emanates from/to us, then we can query the switch to see
if the link is active (if not bandwidth is zero), and return the current
best estimate for the available bandwidth of the link. If the link,
isn't one of ours, then we can thread through the total maximal
capacity of the link.

In order to implement this, the missionControl struct will now query the
switch upon creation to obtain a fresh bandwidth snapshot. We take care
to do this in a distinct db transaction in order to now introduced a
circular waiting condition between the mutexes in bolt, and the channel
state machine.

The aim of this change is to reduce the number of unnecessary failures
during HTLC payment routing as we'll now skip any links that are
inactive, or just don't have enough bandwidth for the payment. Nodes
that have several hundred channels (all of which in various states of
activity and available bandwidth) should see a nice gain from this w.r.t
payment latency.
2018-05-14 16:23:54 -07:00
Olaoluwa Osuntokun
76b9501e04
routing: update TestSendPaymentErrorPathPruning due to recent UnknownPeer change
In this commit, we update the TestSendPaymentErrorPathPruning test to
reflect the new behavior w.r.t how we respond to UnknownPeer errors. In
this new test, we expect that we'll find alternative route in light of
us getting an UnknownPeer error "pointing" to our destination node.
2018-04-23 17:53:46 -07:00
Wilmer Paulino
4598df054e
routing: modify findPath to take into account additional edges
In this commit, we modify our path finding algorithm to take an
additional set of edges that are currently not known to us that are
used to temporarily extend our graph with during a payment session.
These edges should assist the sender of a payment in successfully
constructing a path to the destination.

These edges should usually represent private channels, as they are not
publicly advertised to the network for routing.
2018-04-20 04:01:32 -04:00
Olaoluwa Osuntokun
a6ffe999c6
routing: prune vertex, not ege after repeated FeeInsufficientErrors
In this commit, we modify the way we handle FeeInsufficientErrors to
more aggressively route around nodes that repeatedly return the same
error to us. This will ensure we skip older nodes on the network which
are running a buggier older version of lnd. Eventually most nodes will
upgrade to this new version, making this change less needed.

We also update the existing test to properly use a multi-hop route to
ensure that we route around the offending node.
2018-04-06 14:52:02 -07:00
Olaoluwa Osuntokun
1a05b48080
routing: add new test case to ensure we route around time lock failures 2018-03-23 17:55:16 -07:00
Olaoluwa Osuntokun
62b8ddb839
routing: update TestAddEdgeUnknownVertexes due to additional node in test graph 2018-03-23 17:55:15 -07:00
Olaoluwa Osuntokun
93b04b39fe
routing: account for remaining routing onion errors in SendPayment
In this commit, we address a number of edge cases that were unaccounted
for when responding to errors that can be sent back due to an HTLC
routing failure. Namely:

   * We’ll no longer stop payment attempts if we’re unable to apply a
channel update, instead, we’ll log the error, prune the channel and
continue.
    * We’ll no remember which channels were pruned due to insufficient
fee errors. If we ever get a repeat fee error from a channel, then we
prune it. This ensure that we don’t get stuck in a loop due to a node
continually advertising the same fees.
   * We also correct an error in which node we’d prune due to a
temporary or permanent node failure. Before this commit, we would prune
the next node, when we should actually be pruning the node that sent us
the error.

Finally, we also add a new test to exercise the fee insufficient error
handling and channel pruning.

Fixes #865.
2018-03-21 15:23:48 -07:00
Olaoluwa Osuntokun
aa0410c90a
routing: add new methods to check the freshness of an edge/node
In this commit, we add a set of new methods to check the freshness of
an edge/node. This will allow callers to skip expensive validation in
the case that the router already knows of an item, or knows of a
fresher version of that time.

A set of tests have been added to ensure basic correctness of these new
methods.
2018-03-06 13:34:48 -05:00
t4sk
55f751fd37 routing/router Fix FindRoutes in router test
In router_test FindRoutes is passing DefaultFinalCLTVDelta in place
where numPaths is expected. This commit passes a default numPaths for
function calls to FindRoutes so that final cltv delta are correctly
passed.
2018-02-28 19:25:19 -08:00
Olaoluwa Osuntokun
528aa67df7
routing: weight findPath more heavily towards fees during edge relaxation
In this commit, we modify the edgeWeight function that’s used within
the findPath method to weight fees more heavily than the time lock
value at an edge. We do this in order to greedily prefer lower fees
during path finding. This is a simple stop gap in place of more complex
weighting parameters that will be investigated later.

We also modify the edge distance to use an int64 rather than a float.
Finally an additional test has been added in order to excessive this
new change. Before the commit, the test was failing as we preferred the
route with lower total time lock.
2018-02-12 16:27:38 -08:00
Olaoluwa Osuntokun
6751cd8b9f
routing: update package to account for recent channeldb API changes 2018-02-06 20:14:32 -08:00
Olaoluwa Osuntokun
7a3116f8a9
routing: ensure we set the TotalFees value on routes properly
Before this commit, we wouldn’t properly set the TotalFees attribute.
As a result, our sorting algorithm at the end to select candidate
routes would simply maintain the time-lock order rather than also sort
by total fees. This commit fixes this issue and also allows the test
added in the prior commit to pass.
2017-12-06 18:45:52 -08:00
Olaoluwa Osuntokun
cc3b32c0d4
routing: extend TestFindRoutesFeeSorting to assert proper fee attributes 2017-12-06 18:39:56 -08:00
Olaoluwa Osuntokun
5bc9f07d12
routing: validate incoming announcements in parallel 2017-11-29 16:44:14 -08:00
Olaoluwa Osuntokun
5dbf5084e7
routing: fix linter error 2017-11-06 16:49:36 -08:00
Olaoluwa Osuntokun
ccf94e9457
routing: add new TestRouterChansClosedOfflinePruneGraph test
In this commit we add a new test to the set of unit tests for the
ChannelRouter: TestRouterChansClosedOfflinePruneGraph. This tests that
if channels are closed while the ChannelRouter is down, then upon
restart the channels are properly recognized as being closed.
2017-11-06 16:06:15 -08:00
Olaoluwa Osuntokun
2824f45aad
routing: update tests to adhere to new newMockChainView API 2017-11-06 16:00:57 -08:00
Olaoluwa Osuntokun
3be905109c
routing: add RestartRouter method to testCtx 2017-11-06 16:00:22 -08:00
Johan T. Halseth
256db86b02
routing: make channel router aware of stale blocks
This commit make the channel router handle the case where
it wakes up on a stale branch, and also the case where a
reorg happens while it is active.
2017-11-03 00:05:32 +01:00