Commit Graph

313 Commits

Author SHA1 Message Date
Carsten Otto
4b4d34fcce htlcswitch: change errors to warnings
for issues caused by bogus incoming HTLC data
2021-05-23 19:17:59 +01:00
Carsten Otto
2ae82df2fa htlcswitch: fix typo 2021-05-23 19:17:59 +01:00
Carsten Otto
378bc08e16 htlcswitch: add detailed "insufficient bandwidth" log message
fixes #5250
2021-05-23 19:17:59 +01:00
Carsten Otto
ac4742c2c5 htlcswitch: fix documentation 2021-05-23 19:17:59 +01:00
Carsten Otto
788c94bdcd htlcswitch: fix log message 2021-05-23 19:17:59 +01:00
Johan T. Halseth
0fd76e53b8
multi: cap anchors feerate at configurable maximum
This commit caps the update fee the initiator will send when the anchors
channel type is used. We do not limit anything on the receiver side.

10 sat/vbyte is the current default max fee rate we use. This should be
enough to ensure propagation before anchoring down the commitment
transaction.
2020-12-15 19:54:50 +01:00
yyforyongyu
bf036f2665
htlcswitch: close the updateFeeTimer properly 2020-12-04 23:08:50 +08:00
Conner Fromknecht
0d0f22aacb
link+peer: thread anchor tower client to link 2020-11-25 15:39:14 -08:00
Conner Fromknecht
dd325f04d2
watchtower/wtclient: parameterize backup task with channel type 2020-11-25 15:04:12 -08:00
Johan T. Halseth
87cdf3b797
htlcswitch/link: revert borking channels on received Errors
Since it turned out borking channels on every received error could cause
us to bork channels in case of a sync error with C-lightning, we revert
this for now.
2020-11-23 14:42:41 +01:00
Johan T. Halseth
dde6763cef
htlcswitch/link: set PermanentFailure in case of remote error 2020-11-04 11:16:22 +01:00
eugene
ea467783e9 htlcswitch+peer: remove fwd pkgs once before tick, bump timer to 1hr
This commit changes the logic when garbage collecting forwarding
packages such that they are removed once when the function is called,
and then again upon subsequent ticks. This allows us to bump the
peer timer to 1 hour to limit the number of db transactions happening
in lnd. The forwarding packages need to be removed initially as
otherwise a flappy node will never have them garbage collected.
2020-08-31 20:52:51 -04:00
eugene
62e19185f1 htlcswitch+channeldb: single tx for removing fwdpkgs
This commit changes RemoveFwdPkg to RemoveFwdPkgs so that a single
tx is used instead of N where N is the number of fwd pkgs to remove.
2020-08-31 20:52:51 -04:00
Joost Jager
2903505164
htlcswitch: expose custom records on intercepted packet 2020-06-27 11:00:46 +02:00
Roei Erez
1a6701122c htlcswitch: change ForwardPackets to return error
As part of the preparation to the switch interceptor feature, this
function is changed  to return error instead of error channel that
is closed automatically.
Returning an error channel has become complex to maintain and
implement when adding more asynchronous flows to the switch.
The change doesn't affect the current behavior which logs the
errors as before.
2020-06-18 12:48:21 +03:00
Joost Jager
c325bf8c57
htlcswitch: sync link hand-off
This commit extends the link with a new synchronous delivery point for
local UpdateAddHTLC messages. The switch method SendHTLC is updated to
use this delivery point and thereby becomes a synchronous call.

For MPP payments, synchronous hand-off is important. Otherwise the next
pathfinding round could start without the channel balance updated yet.
2020-05-20 08:03:48 +02:00
Joost Jager
de2df5606a
htlcswitch: extract handleDownstreamUpdateAdd in link
To be able to call just the UpdateAdd logic for synchronously handled
local adds in a later commit.
2020-05-20 08:03:46 +02:00
Joost Jager
55930df70d
htlcswitch: update commit tx per downstream msg type
Unroll common code to allow splitting in separate handlers per message
type.
2020-05-20 08:03:44 +02:00
Joost Jager
b559811bf5
htlcswitch: extract updateCommitTxOrFail in link
Deduplicate code and prepare for further split of
handleDownstreamPkt.
2020-05-20 08:03:42 +02:00
Andras Banki-Horvath
556e3525ea misc: fix error formatting in multiple files 2020-04-24 19:15:08 +02:00
Conner Fromknecht
b467f549b7
htlcswitch/link: return error from AddPacket 2020-04-14 22:34:59 -07:00
Conner Fromknecht
ec1b8d874d
htlcswitch/link: add pending commit ticker for stall detection
This commit adds a PendingCommitTicker to the link config, which allows
us to control how quickly we fail the link if the commitment dance
stalls. Now that the mailbox has the ability to cancel packets, when the
link fails it will reset the mailbox packets on exit, forcing a
reevaluation of the HTLCs against their mailbox expiries.
2020-04-14 10:51:30 -07:00
Conner Fromknecht
6fca22be2b
htlcswitch/link: use return instead of break out
There is no clean up logic after the loop, done purely to improve
clarity.
2020-04-14 10:50:45 -07:00
Conner Fromknecht
e7ece11c29
htlcswitch/mailbox: fail htlcs when delayed for 1 minute
Now that packet failure is handled by the mailbox, we can now enforce
a delivery deadline and fail the packet if it the deadilne is exceeded.
This gives senders quicker feedback about tried routes, and allows them
to try alternative paths to the destination in the meantime.
2020-04-14 10:50:07 -07:00
Conner Fromknecht
564534c829
htlcswitch: move packet failure to mailbox
This commit moves the current logic for sending failures out of the link
and into the mailbox in preparation for our failing delayed htlcs. We do
so because the mailbox may need to fail packets while the link is
offline, and needs to be able to complete the task without member
methods on the link.
2020-04-14 10:48:40 -07:00
Conner Fromknecht
12bbf28e65
htlcswitch: make handleBatchFwdErrors a pure function 2020-04-14 10:48:23 -07:00
Conner Fromknecht
5b38ed0b3e
htlcswitch/link: correct link log statement 2020-04-14 10:47:47 -07:00
Conner Fromknecht
f50649d21b
htlcswitch/link: remove overflow queue
This commit removes the overflowQueue from the link. We do so in order
to promote better UX for senders, so that HTLCs are failed faster when
the commitment is full. This gives the sender the opportunity to try
another, more open path, rather than perceive the HTLC as being stuck.

At the same time, we remove the total number of active goroutines in lnd
by a factor of N where N is the number of active channels.
2020-04-07 13:20:36 -07:00
Conner Fromknecht
e86ddf6ae7
htlcswitch/link: remove unused isReProcess argument 2020-04-07 11:55:25 -07:00
Conner Fromknecht
ec784db511
multi: remove returned error from WipeChannel
The linter complains about not checking the return value from
WipeChannel in certain places. Instead of checking we simply remove the
returned error because the in-memory modifications cannot fail.
2020-04-02 17:39:29 -07:00
nsa
966cd2112c multi: link notifies subscribers of ActiveLinkEvent, rpc ignores 2020-03-27 08:49:46 -04:00
Olaoluwa Osuntokun
31de32686e
Merge pull request #4107 from Crypt-iQ/switch_err_0220
htlcswitch: log fixes
2020-03-26 16:45:58 -07:00
nsa
4fe174ba4e htlcswitch: switch ackDownStreamPackets order with contract update call
This commit modifies updateCommitTx to error with ErrLinkShuttingDown
when we try to send a ContractUpdate on the htlcUpdates chan and the
link has closed the quit chan. It also changes the order of the call
to ackDownStreamPackets and contract update call for consistency since
the packets should be acknowledged before the link goes down.
2020-03-25 11:53:21 -04:00
Oliver Gugger
eb531d0449
htlcswitch: add causing error to log and err msg 2020-03-24 10:00:59 +01:00
Johan T. Halseth
fd93c568ea
config+link: disable watchtower for anchors 2020-03-09 12:59:34 +01:00
Johan T. Halseth
5d5069c477
Merge pull request #3691 from halseth/link-bandwitch-amt-aware
lnwallet: Make available balance HTLC fee aware
2020-02-20 17:56:20 +01:00
carla
71fdd755b4
htlcswitch: notify local receive settles 2020-02-19 18:06:00 +02:00
carla
6bd0de257a
htlcswitch: notify incoming link failures
This commit adds link failure notifications for failures which occur
on our incoming link. These failures may be receives which we failed or
forwards which we could not parse.
2020-02-19 18:05:49 +02:00
carla
fc0ee06a99
htlcswitch: add notifications for forwards
This commit adds notifications for htlcs which are forwarded through
our node. Forwards are notified when the htlc is added on our ougoing
link, settles when we send a settle message to the downstream peer.
If a failure occurs, we check whether it occurred at our node, then
notify a link or forwarding failure accordingly.

Note that this change also adds forward event notifications for sends
which are initiated by our node because the handling code for adding
a htlc which originates from our node is the same as that for handling
forwards. Htlcs for our locally initiated sends have our internal pid
set in the incoming htlcs id field, so we extract this value and notify
with a zero htlc id to be consistent with receives (which have zero
outgoing circuits). Subsequent settles or failures are not noitfied
for local sends in this commit, and will be handled in a follow up.
2020-02-19 18:03:22 +02:00
carla
abf780bf03
multi: add htlcNotifier interface to switch and link
In this commit, a htlcNotifier interface is added to allow for easy
unit testing. Instances of the HtlcNotifier are added to the server,
switch and link.
2020-02-19 17:50:28 +02:00
Johan T. Halseth
5e89d5b6c2
link+lnwallet: move bandwidth channel reserve validation into channel
Since we want to handle the edge case where paying the HTLC fee would
take the initiator below the reserve, we move the subtraction of the
reserve into availableBalance where this calculation will be performed.
2020-02-19 12:27:42 +01:00
carla
1ad395ec3f
htlcswitch: add failure details to incoming failures
This commit adds LinkErrors with failure details to htlcs which fail on
our incoming link. This change is made with the intention of notifying
detailed htlc failure reasons in sendHTLCError. The FailureDetail
interface is implemented on FailureResolutionResults so that they can
directly be used to enrich LinkErrors. sendHtlcError is updated to
take a LinkError in preparation for the addition of a htlcnotifier
which will notify the detail of the error.
2020-02-06 19:43:39 +02:00
carla
74e0d545fe
htlcswitch: add linkError field to htlcpacket
This commit adds a linkError field to track the value of failures
which occur at our node. This field is set when local payments or
multi hop htlcs fail in the switch or on our outgoing link. This
addition is required for the addition of a htlc notifier which will
notify these failures in handleDownstreamPacket.

The passing of link error to failAddPacket removes the need for an
additional error field, because the link error's failure detail will
contain any additional metadata. In the places where the failure detail
does not cover all the metadata that was previously supplied by addr
err, the error is logged before calling failAddPacket so that this
change does not reduce the amount of information we log.
2020-02-06 19:43:29 +02:00
carla
bdd9411bbd
htlcswitch: rename FailureDetail to OutgoingFailure
Rename FailureDetail in a separate commit so that a FailureDetail
interface can be introduced in the following commit.
OutgoingFailureOnionDecode is renamed to OutgoingFailureDecodeError
to specifically indicate that we could not decode the wire
failure that our payment experienced.
2020-02-06 19:43:14 +02:00
carla
2569b4d08a
multi: replace htlcResolution with an interface
This commit repalces the htlcResolution struct with an interface.
This interface is implemeted by failure, settle and accept resolution
structs. Only settles and fails are exported because the existing
code that handles htlc resolutions uses a nil resolution to indicate
that a htlc was accepted. The accept resolution is used internally
to report on the resolution result of the accepted htlc, but a nil
resolution is surfaced. Further refactoring of all the functions
that call NotifyExitHopHtlc to handle a htlc accept case (rather than
having a nil check) is required.
2020-02-06 19:41:36 +02:00
carla
f430fd50c5
htlcswitch: use LinkError for internal errors
Update the ChannelLink interface to specifically
return the LinkError struct. This error implements
the ClearTextError interface, so will be picked
up as a routing realted error by the router.

With LinkErrors implemented, the switch now
returns a LinkError for all failures on our
incoming/outgoing link and ForwardingError when
the failure occurs down the line.
2020-01-14 15:21:15 +02:00
carla
e0c86f1e71
htlcswitch+invoices: fail mpp timeouts with FailMPPTimeout
This commit adds a getResolutionFailure function
which returns an appropriate wire failure based
on the outcome of a htlc resolution. It also updates
 the MissionControlStore test to ensure that lnd
can handle failures which occur due to mpp timeout.
2019-12-20 13:02:02 +02:00
carla
d2e395d5f2
multi: replace errInvoiceNotFound with resolution result
This commit moves handling of invoice not found
errors into NotifyExitHopHtlc and exposes a
resolution result to the calling functions. The
intention of this change is to make calling
functions as naive of the invoice registry's
mechanics as possible.

When NotifyExitHopHtlc is called and an invoice
is not found, calling functions can take action
based on the HtlcResolution's InvoiceNotFound
outcome rather than having to add a special error
check on every call to handle the error.
2019-12-20 13:01:15 +02:00
carla
7b5dda0417
invoices: add resolution result to htlcResolution
This commit adds the resolution result obtained
while updating an invoice in the registry to
htlcResolution. The field can be used by calling
functions to determine the outcome of the
update and act appropriately.
2019-12-20 13:00:53 +02:00
carla
ebfbc48973
link+contractcourt: rename processHodlEvent to processHtlcResolution 2019-12-20 12:59:56 +02:00