This commit removes the EncryptorDecryptor interface, and all related
usage within channeldb. This interface is no longer needed as wallet
specific secrets such as private keys are no longer stored within the
database.
LIGHT-131, LIGHT-140, LIGHT-138
`lncli showroutingtable` may output routing table as image.
Use graphviz for graph rendering.
Add explicit version dependency for tools. Add error checking.
LIGHT-138, LIGHT-141. Due to some issues in sending/receiving parts of lnd,
messages with zero length are not sent. So added some mock content to
NeighborAck. Moved sender/receiver from routing message to wrap message
which contains lnwire routing message.
LIGHT-133, LIGHT-138 Make output of `lncli showrouting table` in
two different formats: table and json.
Instead of sending serialized routing table send list of channels.
This commit fixes some flakiness exhibited in the current basic funding
workflow tests. This test can fail occasionally in resource constrained
environment due to a race condition which arises after Alice learns of
the channel, but Bob is still waiting for Alice’s notification. As a
temporary fix, we now only check Alice’s state for the existence of the
channel.
This commit fixes some flakiness exhibited within the tests on Travis
due to the default behavior of the `go test` command to execute tests
amongst packages in parallel. Since many tests use the `rpctest`
package from `btcd`, many instances of `btcd` would be started at the
same time, with only one being able to grab the port and fully start
up. By forcing tests to be executed serially, this behavior should be
patched.
One downside is that builds on Travis will take longer. Therefore, this
may be a temporary fix a more fundamental fix within the `rpctest`
package is implemented.
This commit modifies the daemon’s initialization within the `lndMain`
method to create an instance of the current default ChainNotifier
outside of the LightningWallet.
At this point, since there are no other implementations of the
ChainNotifier, the current concrete implementation BtcdNotifier is used
by default. In the future, once other ChainNotifier implementations are
in place, config parsing should be fed into a factory function which
creates the proper ChainNotifier implementation.
Finally, several imports have been updated to reflect the change in
package name.
This commit refactors the code within lnwallet interacting with the
ChainNotifier to accept, and call against the implementation rather
than a single concrete implementation.
LightningWallet no longer creates it’s own BtcdNotifier implementation
doing construction, now instead accepting a pre-started `ChainNotifier`
interface. All imports have been updated to reflect the new naming
scheme.
This commit refactors the existing chainntnfns package in order to
allow more easily allow integration into the main system, by allowing
one to gain access to a set of end-to-end tests for a particular
ChainNotifier implementation.
In order to achieve this, the existing set of tests for the only
concrete implementation (`BtcdNoitifer`) have been refactored to test
against all “registered” notifier interfaces registered. This is
achieved by creating the concept of a “driver” for each concrete
`ChainNotifer` implementation. Once a the package of a particular
driver is imported, solely for the side effects, the init() method
automatically registers the driver.
Additionally, the documentation in various areas of the package have
been cleaned up a bit.
This commit adds some new networkHarness helper methods which are
mean’t to reduce the verbosity of the previous basic tests, and also to
enable developers to right tests mote easily five a higher level
interface.
This commit increases the robustness of the current test and also
reduces it’s running time considerably as all “time.Sleep”s have now
been removed.
Rather than sleeping some random amount of time, the test now waits for
a particular async notification to be dispatched before proceeding.
This tightens up the execution of the tests quite a bit.
This commit adds a new feature to the network harness enabling callers
to receive async notifications once a particular transaction is seen on
the network. Such a feature is useful when due to the asynchronous
behavior of node communications.
With this new feature, tests can now wait for a particular transaction
to be seen within the network before proceeding.
This commit updates the response handling of the steaming RPC’s to
account for the fact that multiple messages from the server (state
updates) can now be sent over the stream instead of a single final
update.
Currently, all updates other than the “final” update are ignored by the
cli.
This commit modifies the internal workflow for opening or closing a
channel in order to create a path in which RPC clients can receive
updates. Updates are now communicated via channels from the goroutines
spawned by the RPC server to process the request, and the sub-system
within the daemon that actually executes the request.
With this change clients can now receive updates that the request is
pending (final message has been sent to the target client), or that the
request has been completed. Confirmation related updates have not yet
been implemented as that will require some changes to the ChainNotifier
interface.
This commit speeds up the integration test initialization by launching
the processes of the two seeder nodes concurrently rather than
serially.
Additionally, the harness will now block until the wallets of both the
seeder nodes are fully synced up.
This commit modifies the prior protos to make the open/close channel
RPC commands return the “union” status update rather than a concrete
item of that union directly. With this change, RPC clients can now
receive status updates of the current state of the opening or closing
channel.
This commit fixes the build for version 1.6.3 of golang. In go 1.7, the
“context” package was moved into the standard library, however go 1.6.3
doesn’t have that change, so we must refer to the prior WIP package
until a new version of Go is released.
This commit introduces a simple piece of infrastructure for integration
testing: the networkHarness.
The harness allows for the creation and orchestration of a small
testbed of lnd nodes. The harness includes an instance of btcd’s
rpctest.Harness which allows driving certain actions in a mock Bitcoin
network to exercise relevant lnd behavior(s). By default, the harness
creates two instances of lnd (Alice and Bob), then establishes a
peer-to-peer connection between them. Created lnd nodes within the test
network can be driven programmatically by gRPC connections to their
respective RPC severs.
Later on more features will be added such as adding additional nodes,
opening channels between nodes, creating scripting topologies, etc,
This commit adds an option to pass in a raw hex-encoded rpc cert via
lnd’s configuration file. Such a change allows for programmatically
creating lnd nodes which can connect to an existing btcd instance
without requiring a file for the rpc cert to be specified.
Additionally, this commit makes the creation of an integration testing
harness easier.
This commit revamps the existing docker configuration to allow for
developer’s to easily bring up/down a Lightning Network testbed
environment.
Configuration related bugs within the prior swarm set up have been
fixed. The launched lnd nodes are now able to properly communicate with
the primary btcd node over RPC. The auto-generated RPC script has been
scrapped in favor of hard-coding a developer-only set of RPC
credentials. With this change, it’s now possible to add/remove
additional lnd nodes in order to test more complex scenarios.
Additionally, the containers now build off of the latest Go version
(1.7).
This commit fixes an omission within the htlcSwitch. With this commit,
a channels bandwidth is now properly updated once an incoming HTLC is
settled.
This also fixes a bug where if a node received a payment, it wouldn’t
be able to then utilize the newly available bandwidth to send further
payments.
This commit fixes a bug in the lockTimeToSequence function when mapping
a block-based relative lock time to the proper sequence number.
Applying the mask isn’t necessary since the values are expected to be
blow 65K blocks.
This commit integrates BitFury's current routing functionality into lnd. The
primary ochestration point for the routing sub-system in the routingMgr. The
routingMgr manages all persistent and volatile state related to routing within
the network.
Newly opened channels, either when the initiator or responder are inserted into
the routing table once the channel is fully open. Once new links are inserted
the routingMgr can then perform path selection in order to locate an "optimal"
path to a target destination.
This commit optimizes the previous deadlock bug-fix within the peer’s
channelManager which handles driving the LCP state machine with
additional context-specific state.
Rather than forwarding to the HTLC switch within the primary loop which
handles fully locked-in HTLCs, we now launch a distinct goroutine which
is responsible for properly forwarding lock-in HTLC’s to the
htlcSwitch.
This commit adds a basic test for cooperative channel closure. The
current test ensures correctness of the cooperative closure procedure
initiated by either the channel initiator, or the channel responder.
The original project has been migrated to a new user. Currently git
redirects are served from the old repository to the newness. However
since development has witched to this new repository we update our
imports for clarity.
This commit updates the previous travis CI config to pin against the
two latest golang versions, and perform installation via Glide.
Additionally, this should allow lnwallet’s integration tests to build
properly as the btcd binary will be available in the build process’
PATH.
