Commit Graph

284 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
60c8257c3c
peer: modify the msgStream to not buffer messages off the wire indefinitely
In this commit, we modify the msgStream struct to ensure that it has a
cap at which it’ll continue to buffer messages. Currently we have two
msgStream structs per peer: the first for the discovery messages, and
the second for any messages that modify channel state. Due to
inefficiencies in the current protocol for reconciling graph state upon
connection (just dump the entire damn thing), when a node first starts
up, this can lead to very high memory usage as all peers will
concurrently send their initial message dump which can be in the
thousands of messages on testate.

Our fix is simple: make the message stream into a _bounded_ message
stream. The newMsgStream function now has a new argument: bufSize.
Internally, we’ll take this bufSize and create more or less an internal
semaphore for the producer. Each time the producer gets a new message,
it’ll try and read an item from the channel. If the queue still has
size, then this will succeed immediately. If not, then we’ll block
until the consumer actually finishes processing a message and then
signals by sending a new item into the channel.

We choose an initial value of 1000. This was chosen as there’s already
a max limit of outstanding adds on the commitment, and a value of 1000
should allow any incoming messages to be safely flushed and processed
by the gossiper.
2018-03-12 16:34:59 -07:00
Johan T. Halseth
80ef16e853
peer: hand lnwire.Error to fndgMngr or link depending on chanID 2018-03-11 17:21:23 +01:00
Conner Fromknecht
972d238f04
peer: remove Switch from channel link config 2018-03-09 21:18:15 -08:00
Conner Fromknecht
d468a36d69
peer: pass unsafe-replay to link config 2018-03-09 21:18:15 -08:00
Conner Fromknecht
8d0e3dc467
peer: adds FwdPkgGCTicker to channel configs 2018-03-09 21:18:14 -08:00
Conner Fromknecht
0e4be6a04a
peer: init link with batched sphinx processing 2018-03-09 21:18:14 -08:00
Johan T. Halseth
b9d1eceda3
peer: use EstimateFeePerVSize 2018-02-26 22:42:26 +01:00
MeshCollider
2c2ed3c6a9 multi: Unify use of NodeKey in log messages 2018-02-19 17:48:39 -08:00
MeshCollider
915c4201b9 multi: remove internal peer_id usage 2018-02-19 17:48:39 -08:00
practicalswift
b8e1351cf3 multi: fix some recently introduced typos 2018-02-18 15:27:29 -08:00
Olaoluwa Osuntokun
2e090ee2ab
peer: only return a channel snapshot if the channel can route
In this commit, we fix a slight miscalculation within the GetInfo call.
Before this commit, we would list any channel that the peer knew of as
active, instead of those which are, well, actually *active*. We fix
this by skipping any channels that we don’t have the remote revocation
for.
2018-02-08 19:40:54 -08:00
Olaoluwa Osuntokun
22951cb364
lnd: account for new lnwire.Sig API and channeldb API changes 2018-02-06 20:14:33 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Johan T. Halseth
26a80f86b8
peer: set BatchTicker and BatchSize in channellink config 2018-02-02 21:16:37 -05:00
Olaoluwa Osuntokun
0a4de859a2
discovery+routing: reduce number of active validation barrier jobs
In order to reduce high CPU utilization during the initial network view
sync, we slash down the total number of active in-flight jobs that can
be launched.
2018-01-28 14:55:32 -08:00
Olaoluwa Osuntokun
d4e650c85d
peer: the chancloser no longer needs to notify the breach arb of settled transactions 2018-01-22 19:19:59 -08:00
Olaoluwa Osuntokun
5df6704a9c
contractcourt: make synchronous chain watcher notifications optional
In this commit, we modify the way that notifications are dispatched
within the chainWatcher. Before we would *always* wait for an ack back
before we started to clean up he database state. This would at times
lead to deadlocks. To remedy this, we now allow callers to decide if
they want notifications to be sync or not. The only current caller that
requires this is the breach arbiter.
2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
3ec83cc82f
peer+contractcourt: delegate watching for co-op closes to the chainWatcher
In this commit, we modify the interaction between the chanCloser
sub-system and the chain notifier all together. This fixes a series of
bugs as before this commit, we wouldn’t be able to detect if the remote
party actually broadcasted *any* of the transactions that we signed off
upon. This would be rejected to the user by having a “zombie” channel
close that would never actually be resolved.

Rather than the chanCloser watching for on-chain closes, we’ll now open
up a co-op close context to the chainWatcher (via a layer of
indirection via the ChainArbitrator), and report to it all possible
closes that we’ve signed. The chainWatcher will then be able to launch
a goroutine to properly update the database state once any of the
possible closure transactions confirms.
2018-01-22 19:19:53 -08:00
Olaoluwa Osuntokun
69e6ec9954
peer+funding: remove unneeded channel handoff code with the breach arbiter
We no longer need to hand off new channels that come online as the
chainWatcher will be persistent, and always have an active signal for
the entire lifetime of the channel.
2018-01-22 19:19:50 -08:00
Olaoluwa Osuntokun
defa1bc3e3
peer: when creating new links, obtain an on-chain events subscription 2018-01-22 19:19:49 -08:00
Olaoluwa Osuntokun
24a16b4f49
lnd: properly initialize entities of new contractcourt package 2018-01-22 19:19:42 -08:00
Olaoluwa Osuntokun
b1fe0c12bf
peer: ensure that any active msgStreams properly exit upon peer D/C
In this commit, we modify the logic within the Stop() method for
msgStream to ensure that the main goroutine properly exits. It has been
observed on running nodes with tens of connections, that if a node is
very flappy, then the node can end up with hundreds of leaked
goroutines.

In order to fix this, we’ll continually signal the msgConsumer to wake
up after the quit channel has been closed. We do this until the
msgConsumer sets a bool indicating that it has exited atomically.
2018-01-08 19:50:22 -08:00
Conner Fromknecht
44805be8d9
peer: filter borked channels when loading active chans 2018-01-05 13:47:18 -08:00
Johan T. Halseth
25b77a0aee peer: add error chan to queueMsg 2017-12-19 13:01:59 -06:00
Matt Drollette
adf0d98194 multi: fix several typos in godoc comments 2017-12-17 18:40:05 -08:00
Olaoluwa Osuntokun
ecf58d64f7
peer: properly route UpdateFailMalformedHTLC messages to the switch
This commit adds an overlooked case into the main type switch statement
within the peer’s readHandler. Before this commit, we would fail to
process any UpdateFailMalformedHTLC messages, possibly leading to a
commitment desynchronization. To avoid this case, we’ll no properly
process the UpdateFailMalformedHTLC message by sending the message to
an active link registered to the switch.
2017-12-12 11:22:50 -08:00
Olaoluwa Osuntokun
ce6dee6ee4
peer: check LocalUnrevokedCommitPoint for nil-ness as it's optional
In this commit, we modify the logWireMessage function to ensure that we
don't attempt to nil out the LocalUnrevokedCommitPoint.Curve field
unless it's actually set. We need to do this as the field as actually
optional, and we may be reading a message from a node that doesn't
support the option.

Fixes #461.
2017-12-07 13:11:23 -08:00
Olaoluwa Osuntokun
4444ec39ea
funding: properly display our 1-byte error code messages 2017-12-06 18:43:58 -08:00
Olaoluwa Osuntokun
7960b5240f
peer: when processing a msg, skip he funding barrier if it's a ChanSync message
This commit is a follow up to the prior commit: as it’s possible for
the channel_reestablish message to be sent *before* the channel has
been fully confirmed, we’ll now ensure that we process it to the link
even if the channel isn’t yet open.
2017-12-06 16:43:00 -08:00
Olaoluwa Osuntokun
084d477ec3
peer: always load active channels upon connection reestablishment with peer
In this commit, we modify the logic within loadActiveChannels to
*always* load a channel, even if it isn’t yet fully confirmed. With
this change, we ensure that we’ll always send a channel_reestablish
message upon reconnection.

Fixes #458.
2017-12-06 16:43:00 -08:00
Olaoluwa Osuntokun
7b10f54216
peer: in logWireMessage also unset curve field for lnwire.ChannelReestablish
This will allow users to run in trace mode again, without having an
excessive amount of spam in their logs.
2017-12-06 16:43:00 -08:00
Olaoluwa Osuntokun
3bc248e01c
peer: properly process retransmitted FundingLocked message we've never processed
In this commit, we modify the logic within the channelManager to be
able to process any retransmitted FundingLocked messages. Before this
commit, we would simply ignore any new channels sent to us, iff, we
already had an active channel with the same channel point. With the
recent change to the loadActiveChannels method in the peer, this is now
incorrect.

When a peer retransmits the FundingLocked message, it goes through to
the fundingManager. The fundingMgr will then (if we haven’t already
processed it), send the channel to the breach arbiter and also to the
peer’s channelManager. In order to handle this case properly, if we
already have the channel, we’ll check if our current channel *doesn’t*
already have the RemoteNextRevocation field set. If it doesn’t, then
this means that we haven’t yet processed the FundingLcoked message, so
we’ll process it for the first time.

This new logic will properly:
  * ensure that the breachArbiter still has the most up to date channel
  * allow us to update the state of the link has been added to the
switch at this point
      * this link will now be eligible for forwarding after this
sequence
2017-12-06 16:42:59 -08:00
Olaoluwa Osuntokun
ddc5a0fc85
peer: unconditionally add a channel to the switch if it's open
In this commit we revert a prior change which was added after
FundingLocked retransmission was implemented. This prior change didn’t
factor in the fact that the FundingLocked message will *only* be
re-sent after both sides receive the ChannelReestablishment message.
With the prior code, as we never added the channel to the link, we’d
never re-send the ChannelReestablishment, meaning the other side would
never send the FundingLocked message.

By unconditionally adding the channel to the switch, we ensure that
we’ll always properly retransmit the FundingLocked message.
2017-12-06 16:42:59 -08:00
Olaoluwa Osuntokun
ccd1dad71e
peer: set HtlcPoint to nil within logWireMessage
This new field was added as a recent modification to the spec, but the
curve parameter within the attribute wasn’t set to nil. As a result
this would result in a large degree of spam within the logs when set to
trace mode. This commit fixes this issue by setting it to nil along
with all the other pub keys within messages.
2017-12-01 19:31:56 -08:00
Olaoluwa Osuntokun
c3ec32e67b
peer: display lnwire.Error body as ascii string in messageSummary
It dictates in the spec, that the error message should be an ASCII
string to allow other implementations to easily discern the type of
error. The other implementations do this, but we don’t yet, but we’ll
go ahead and display it anyway as it’s helpful when debugging.
2017-11-30 22:19:18 -08:00
Olaoluwa Osuntokun
58ab3f5f83
peer: show conf depth in message summary for AcceptChannel 2017-11-27 16:50:10 -08:00
Olaoluwa Osuntokun
56632235fd
peer: set FeeEstimator in ChannelLinkConfig when creating link 2017-11-23 23:10:21 -06:00
Olaoluwa Osuntokun
39295dc5aa
lnwallet+peer: add new ResetState method to channel state machine
In this commit, we add a new ResetState method to the channel state
machine which will reset the state of the channel to `channelOpen`. We
add this as before this commit, it was possible for a channel to shift
into the closing state, the closing negotiation be cancelled for
whatever reason, resulting the the channel held by the breachArbiter
unable to act to potential on-chain events.
2017-11-23 23:10:16 -06:00
Olaoluwa Osuntokun
259a01b29d
peer: integrate new channelCloser state machine for co-cop channel closes
In this commit, we refactor the existing channel closure logic for
co-op closes to use the new channelCloser state machine. This results
in a large degree of deleted code as all the logic is now centralized
to a single state machine.
2017-11-23 23:10:11 -06:00
Olaoluwa Osuntokun
1cf1d250b3
peer: update WipeChannel method to match recent htlcswitch API change 2017-11-23 23:10:11 -06:00
Johan T. Halseth
555cead5ad peer: avoid blocked writeHandler<->queueHandler interaction
This commit addresses an issue that could occur if a
message was attempted added to the sendQueue by the
queueHandler before the writeHandler had started.

If a message was sent to the queueHandler before the
writeHandler was ready to accept messages on the
sendQueue, the message would be added to the
pendingMsg queue, but would not be attempted sent
on the sendQueue again before a new incoming message
triggered a new attempt.
2017-11-15 18:54:06 -08:00
Olaoluwa Osuntokun
150ab00842
peer: add message summary for lnwire.ChannelReestablish 2017-11-10 19:51:11 -08:00
Olaoluwa Osuntokun
e337a329cd
peer+rpc: properly set ChainHash in ChannelCloseSummary instances 2017-11-10 19:51:09 -08:00
Andrey Samokhvalov
d70ffe93e4 htlcswitch+channel: add channel states synchronization
In this commit BOLT№2 retranmission logic for the channel link have
been added. Now if channel link have been initialised with the
'SyncState' field than it will send the lnwire.ChannelReestablish
message and will be waiting for receiving the same message from remote
side. Exchange of this message allow both sides understand which
updates they should exchange with each other in order sync their
states.
2017-11-09 16:38:57 -08:00
Conner Fromknecht
04a56e7286
peer: add async queue for gossiper msgs
This commit refactors the core logic of the
  chanMsgStream to support an additional stream
  that is used to asynchronously queue for in-order
  delivery to the authenticated gossiper. The channel
  streams are slightly adapted to use the more flexible
  primitive. We may look to refactor this using more
  isolated interfaces, but for now this provides a
  minimal change to resolving known flakes.
2017-11-02 15:57:12 -07:00
Olaoluwa Osuntokun
bb1fd98b67
peer: print hex encoded failure reason for lnwire.UpdateFailHTLC in msg summaries 2017-10-22 18:36:40 -07:00
Olaoluwa Osuntokun
8de0a4cb24
peer: when logging message summaries use the correct preposition 2017-10-19 19:45:34 -07:00
Olaoluwa Osuntokun
4cf4fd377f
peer: in chanMsgStream release lock for condition var after msg q pop
In this commit we fix an existing bug within the msgConsumer grouting
of the chanMsgStream that could result in a partial deadlock, as the
readHandler would no longer be able to add messages to the message
queue. The primary cause of this issue would be if we got an update for
a channel that “we don’t know of”. The main loop would continue,
leaving the mutex unlocked. We would then try to re-lock at the top of
the loop, leading to a deadlock.

We avoid this situation by properly unlocking the condition variable as
soon as we’re done modifying the condition itself.
2017-10-19 19:45:08 -07:00
Olaoluwa Osuntokun
56d4c15914
peer: add localFeatures as parameter to newPeer
In this commit we add the set of local features advertised as a
parameter to the newPeer function. With this change, the server will be
able to programmatically determine _which_ bits should be set on a
connection basis, rather than re-using the same global set of bits for
each peer.
2017-10-18 15:16:09 -07:00
Olaoluwa Osuntokun
f6f983a13b
peer: rename theirLocalFeatures+theirGlobal features to remote prefix 2017-10-18 15:14:27 -07:00
Jim Posen
af49752d4d peer: Update peer handling of received feature vectors.
This updates peer to be compatible with the new feature vector API.
2017-10-17 22:47:20 -07:00
Olaoluwa Osuntokun
f953f94f71
peer: display reversed bytes of chain hash in message summaries 2017-10-17 19:44:15 -07:00
Olaoluwa Osuntokun
dc124baca1
peer: if cooperative closing transaction is rejected, return err to caller 2017-10-17 19:44:14 -07:00
Olaoluwa Osuntokun
b7e193354a
peer: add message summaries of sent/recv'd message for debug log level
This commit fills in an existing logging gap by adding a new set of
message summaries that is shown for the debug logging level.

Before this commit, if a user wanted to get a close up feel for what
lnd was doing under the covers, they had to use the trace logging
level. Trace can be very verbose, so we now provide a debug logging
level with message “summaries”. The summaries may not contain all the
data in the message, hut have been crafted in order to provide
sufficient detail at a glance.
2017-10-17 19:44:12 -07:00
Olaoluwa Osuntokun
0692d2d408
peer: log type of received unknown message 2017-10-16 18:43:19 -07:00
Olaoluwa Osuntokun
f4e7c36c80
peer: eliminate excessive queueHandler spinning w/ blocked writeHandler
This commit fixes an existing bug within the iteration between the
queueHandler and the writeHandler. Under certain scenarios, if the
writeHandler was blocked for a non negligible period of time, then the
queueHandler would enter a very tight spinning loop. This was due to
the fact that the break statement in the inner select loop of the
queueHandler wouldn’t actually break the inner for loop, instead it
would cause the execution logic to re-enter that same select loop,
causing a very tight spin.

In this commit, we fix the issue by adding to things: we now label the
inner select loop so we can break out of it if we detect that the
writeHandler has blocked. Secondly, we introduce a new channel between
the queueHandler and the writeHandler to signal the queueHandler that
the writeHandler has finished processing the last message.
2017-10-15 15:19:57 -07:00
Olaoluwa Osuntokun
cbdf139696
peer: add an idle timer to the readHandler
In this commit, we add an idle timer to the readHandler itself. This
will serve to slowly prune away inactive TCP connections as a result of
remote peer being blocked either upon reading or writing to the socket.
Our ping timer interval is 1 minute, so an idle timer interval of 5
minutes seem reasonable.
2017-10-15 15:14:35 -07:00
Olaoluwa Osuntokun
63838f5764
peer+server: use new sphinx package and htlcswitch package type names 2017-10-10 22:19:21 -07:00
Olaoluwa Osuntokun
171c997fe0
peer: within loadActiveChannels, skip channel if FundingLocked not processed
This commit fixes a bug to wrap up the recently merged PR to properly
handle duplicate FundingLocked retransmissions and also ensure that we
reliably re-send the FundingLocked message if we’re unable to the first
time around.

In this commit, we skip processing a channel that does not yet have a
set remote revocation as otherwise, if we attempt to trigger a state
update, then we’ll be attempting to manipulate a nil commitment point.
Therefore, we’ll rely on the fundingManager to properly send the
channel all relevant subsystems.
2017-10-02 16:30:28 -07:00
Johan T. Halseth
ee2eec6188
peer: ignore new channel requests for already active channels. 2017-10-02 13:29:54 +02:00
Olaoluwa Osuntokun
c5876e5d21
peer: avoid exit deadlock by ensuring WaitGroups are decremented before disconnect 2017-09-27 20:22:52 -07:00
Olaoluwa Osuntokun
ab25b636f5
peer: add conditional sends on quit within readHandler message dispatch 2017-09-27 20:18:29 -07:00
Olaoluwa Osuntokun
37d03d1e56
peer: avoid possible GC leak by setting popped queue element to nil 2017-09-24 20:08:34 -07:00
Conner Fromknecht
74322a99be config+htlclink+peer: htlc hodl mode!
This commit adds a new debug mode for lnd
  called hodlhtlc. This mode instructs a node
  to refrain from settling incoming HTLCs for
  which it is the exit node. We plan to use
  this in testing to more precisely control
  the states a node can take during
  execution.
2017-09-19 11:31:52 -07:00
Olaoluwa Osuntokun
a43e9c6883
peer: check for ErrEdgeNotFound when loading chan edge for fwrding policy
This commit adds a precautionary check for the error returned if the
channel hasn’t yet been announced when attempting to read the our
current routing policy to initialize the channelLink for a channel.
Previously, if the channel wasn’t they announced, the function would
return early instead of using the default policy.

We also include another bug fix, that avoids a possible nil pointer
panic in the case that the ChannelEdgeInfo reread form the graph is
nil.
2017-08-30 15:34:27 -07:00
Olaoluwa Osuntokun
d4d5198e85
peer: if we don't have an advertised routing policy, fall back to default
This commit fixes a bug that could arise if either we had not, or the
remote party had not advertised a routing policy for either outgoing
channel edge. In this commit, we now detect if a policy wasn’t
advertised, falling back to the default routing policy if so.

Fixes #259.
2017-08-23 11:34:53 -07:00
Olaoluwa Osuntokun
b069406d1e
peer: fix bug, use the existing timestamp for the ChannelUpdate msg
This commit fixes a lingering bug within the logic for the
peer/htlcswitch/channellink. When the link needs to fetch the latest
update to send to a sending party due to a violation of the set routing
policy, previously it would modify the timestamp on the message read
from disk. This was incorrect as it would invalidate the signature
within the message itself. We fix this by instead
2017-08-22 00:53:31 -07:00
Olaoluwa Osuntokun
3086a9d06a
peer: ensure a peer can exit mid cooperative closure
This commit adds another conditional send select statement to ensure
that when sending the finalized contract to the breach arbiter, the
peer doesn’t possible cause the daemon to hang on shutdown.
2017-08-22 00:53:28 -07:00
Olaoluwa Osuntokun
c09713ebd1
peer+server: rename discoverSrv to authGossiper 2017-08-22 00:53:25 -07:00
Olaoluwa Osuntokun
dd1d69b140
peer: fetch forwarding policy from disk rather than using default
This commit modifies the logic when we are loading alll the channels
that we have with a particular peer to grab the current committed
forwarding policy from disk rather then using the default forwarding
policy. We do this as it’s now possible for active channels to have
distinct forwarding policies.
2017-08-22 00:53:23 -07:00
Olaoluwa Osuntokun
01b0ddf1c5
lnd+rpc: update RPC responses to convert mSAT to SAT 2017-08-22 00:52:56 -07:00
Olaoluwa Osuntokun
65dede2584
peer: ensure chan sends to breachArbiter can't block indefinitely
This commit fixes a possible deadlock bug that may arise during
shutdown due to an unconditional send on a channel to the breach
arbiter. We do this on two occasions within the peer: when loading a
new contract to give it the live version, and also when closing a
channel to ensure that it no longer watches over it.

Previously it was possible for these sends to block indefinitely in the
scenario that the server was shutting down (which means the breach
arbiter) is. As a result, the channel would never be drained, meaning
the server couldn’t complete shutdown as the peer hadn’t exited yet.
2017-08-18 12:16:29 -07:00
Johan T. Halseth
e8e87322dd
peer: add channel close fee negotiation
This commit adds the fee negotiation procedure performed
on channel shutdown. The current algorithm picks an ideal
a fee based on the FeeEstimator and commit weigth, then
accepts the remote's fee if it is at most 50%-200% away
from the ideal. The fee negotiation procedure is similar
both as sender and receiver of the initial shutdown
message, and this commit also make both sides use the
same code path for handling these messages.
2017-08-11 12:10:32 +02:00
Olaoluwa Osuntokun
a2545d85dc
peer: ensure goroutine launched during initial handshake exits
This commit fixes a bug which was covered by the recent server
refactoring wherein the grouting would be stuck on the send over the
message channel in the case that the handshake failed. This blockage
would create a deadlock now that the ConnectToPeer method is full
synchronous.

We fix this issue by ensuring the goroutine properly exits.
2017-08-10 18:07:54 -07:00
Conner Fromknecht
efd9cf12b8 peer: adds tracking of go routines to sync disconnect
In addition to improved synchronization between the client
  and server, this commit also moves the channel snapshotting
  procedure such that it is handled without submitting a query
  to the primary select statement. This is primarily done as a
  precaution to ensure that no deadlocks occur, has channel
  snapshotting has the potential to block restarts.
2017-08-10 16:14:01 -07:00
Olaoluwa Osuntokun
43b736225b
multi: add new method to generate fresh node announcments 2017-08-04 18:32:33 -07:00
Olaoluwa Osuntokun
c183e8984c
peer: properly clean up chanMsgStreams map on readHandler exit
This commit ensures that all references within the chanMsgStreams are
all removed and deleted when the readHandler exits. This ensures that
all objects don’t have extra references, and will properly be garbage
collected.
2017-08-03 13:52:12 -07:00
Olaoluwa Osuntokun
36f4e2046d
peer: ensure mutex is freed up when the msgConsumer exits 2017-08-03 13:50:34 -07:00
Olaoluwa Osuntokun
79e68a2fdf
peer: properly initialize ChannelLink with new block+height info 2017-08-02 21:15:57 -07:00
Olaoluwa Osuntokun
0377a4f99d
peer: ensure the chanMsgStream for a channel exists on peer d/c 2017-07-31 21:31:24 -07:00
Olaoluwa Osuntokun
c47408119e
peer: abandon the prior activeChanStreams scheme in favor of chanMsgStream
This commit fixes a bug that existed in the prior scheme we used to
synchronize between the funding manager and the peer’s readHandler.
Previously, it was possible for messages to be re-ordered before the
reached the target ChannelLink. This would result in commitment
failures as the state machine assumes a strict in-order message
delivery. This would be manifested due to the goroutine that was
launched in the case of a pending channel funding.

The new approach using the chanMsgStream is much simpler, and easier to
read. It should also be a bit snappier, as we’ll no longer at times
create a goroutine for each message.
2017-07-31 21:25:54 -07:00
Olaoluwa Osuntokun
5e4b368348
peer: introduce chanMsgStream to provide a concurrent safe, in-order stream of msgs 2017-07-31 21:20:42 -07:00
Olaoluwa Osuntokun
f963859524
funding+peer: rename processFundingResponse to processFundingAccept 2017-07-31 21:04:58 -07:00
Olaoluwa Osuntokun
cd7b3290a8
peer: modify channel closing negotiation to create new delivery scripts
This commit modifies the channel close negotiation workflow to instead
take not of the fat that with the new funding workflow, the delivery
scripts are no longer pre-committed to at the start of the funding
workflow. Instead, both sides present their delivery addresses at the
start of the shutdown process, then use those to create the final
cooperative closure transaction.

To accommodate for this new change, we now have an intermediate staging
area where we store the delivery scripts for both sides.
2017-07-30 17:51:37 -07:00
Olaoluwa Osuntokun
01fe9adff0
peer: update logWireMessage to account for new lnwire messages 2017-07-30 17:51:34 -07:00
Andrey Samokhvalov
6bbb7cbfc3 lnd: hook up encrypted onion error scaffolding
In this commit daemon have been changed to set the proper hooks in the
channel link and switch subsystems so that they could send and receive
encrypted onion errors.
2017-07-14 19:08:04 -07:00
Andrey Samokhvalov
ef73062c14 peer+server+htlcswitch: add reason to disconnnect function
In order to recognize exact reason of the disconnect the additional
field have been added in the disconnect function.
2017-07-14 19:08:04 -07:00
Johan T. Halseth
adbbd1e80f peer: handle received update_fee message. 2017-07-14 16:39:15 -07:00
Olaoluwa Osuntokun
e15604f7b5
peer: ensure latest version of htlcswitch.Peer interface is implemented 2017-06-17 00:11:10 +02:00
Olaoluwa Osuntokun
d202b730eb
peer: fix peer API usage due to incomplete cherry-pick 2017-06-05 19:41:18 -07:00
Olaoluwa Osuntokun
25dc294cf0
server: all references to primary interfaces are now through chainControl 2017-06-05 18:53:37 -07:00
Andrey Samokhvalov
c4955258f1 htlcswicth: start use htlcswitch and channel link inside lnd
In current commit big shift have been made in direction of unit testable
payments scenarios. Previosly two additional structures have been added
which had been spreaded in the lnd package before, and now we apply
them in the lnd itself:

1. ChannelLink - is an interface which represents the subsystem for
managing the incoming htlc requests, applying the changes to the
channel, and also propagating/forwarding it to htlc switch.

2. Switch - is a central messaging bus for all incoming/outgoing htlc's.
The goal of the switch is forward the incoming/outgoing htlc messages
from one channel to another, and also propagate the settle/fail htlc
messages back to original requester.

With this abtractions the folowing schema becomes nearly complete:

abstraction
    ^
    |
    | - - - - - - - - - - - - Lightning - - - - - - - - - - - - -
    |
    | (Switch)		        (Switch)		  (Switch)
    |  Alice <-- channel link --> Bob <-- channel link --> Carol
    |
    | - - - - - - - - - - - - - TCP - - - - - - - - - - - - - - -
    |
    |  (Peer) 		        (Peer)	                  (Peer)
    |  Alice <----- tcp conn --> Bob <---- tcp conn -----> Carol
2017-05-31 11:06:08 -07:00
Olaoluwa Osuntokun
311495e6d0
peer: add additional comments around new channel close workflow, minor fixes
This commit adds a set of additional comments around the new channel
closure workflow and also includes two minor fixes:
  * The error when parsing a signature previously wasn’t checked and is
    now.
  * As a result, we should only track the new signature iff it parses
    correctly and we agree to the details as specified w.r.t to the fee
    for the final closing transaction.

Additionally, as set of TODO’s has been added detailing the additional
work that needs to be done before the closing workflow is fully
compliant with the specification.
2017-05-23 15:26:50 -07:00
Olaoluwa Osuntokun
e635b958a5
peer: consolidate sendClosingSigned into shutdown resp flow 2017-05-23 15:23:06 -07:00
Olaoluwa Osuntokun
588a606a56
peer: ensure when closing the channel actually exists 2017-05-23 15:22:06 -07:00
bryanvu
408be356fb lnwallet: update channel close to use fee estimation interface
This commit switches the channel close workflow to use the lnwallet fee
estimation interface rather than the hardcoded proposedFee.
2017-05-23 14:31:20 -07:00
bryanvu
514760f529 peer: handling for channel shutdown messages
This commit changes the cooperative channel close workflow to comply
with the latest spec. This adds steps to handle and send shutdown
messages as well as moving responsibility for sending the channel close
message from the initiator to the responder.
2017-05-23 14:31:20 -07:00
bryanvu
d7bb600c23 lnwire: adjusted coop close messages to comply with spec
Removed close_request and close_complete and replaced with shutdown and
closing_signed.
2017-05-23 14:31:20 -07:00
Olaoluwa Osuntokun
e7420edd44 peer: fix last-mile settle stalling in concurrent multi-hop setting
This commit fixes an issue that would at times cause the htlcManager
which manages the link that’s the final hop to settle in an HTLC flow.
Previously, a case would arise wherein a set of HTLC’s were settled to,
but not properly committed to in the commitment transaction of the
remote node. This wasn’t an issue with HTLC’s which were added but
uncleared, as that batch was tracked independently.

In order to fix this issue, we now track pending HTLC settles
independently. This is a temporary fix, as has been noted in a TODO
within this commit.
2017-05-18 20:19:03 -07:00
Olaoluwa Osuntokun
041f3f1e98 peer: eliminate possibility of concurrent map writes in htlcManager
This commit fixed an issue in the htlcManager goroutine which manages
channel state updates. Due to lack of a mutex protecting the two maps
written in the goroutine launched to forward HTLC’s to the switch.

This issue was detected by golang’s runtime which is able to detect
invalid concurrent map writes.
2017-05-18 20:13:33 -07:00