Commit Graph

357 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
0e510c8b5c
funding+peer: don't attempt to deliver messages if the peer is shutting down 2018-08-25 17:30:11 -07:00
Olaoluwa Osuntokun
d6f534cfa5
peer: don't attempt to re-enable any private channels 2018-08-25 17:30:09 -07:00
Olaoluwa Osuntokun
5130949604
peer: allow msgConsumers to also exit on peer quit send 2018-08-25 17:30:07 -07:00
Olaoluwa Osuntokun
33c5c9661e
peer: allow msgStream goroutines to quit within the apply function
In this commit, we thread through the quit of the peer to the execution
of the apply function for a msgStream. This change ensures that if the
target is still processing the message, then the peer is able to exit
cleanly and not block insensately.
2018-08-25 17:30:05 -07:00
Olaoluwa Osuntokun
e4e4a6ab58
peer: move atomic var increment in msgConsumer goroutine to defer
In this commit we move the atomic var increment that signals the
consumer goourtine has exited to the top of the method in a defer
statement. This cleans up some duplicate code and also adheres to the
pattern of using defers to signal cleaning up any dependent goroutine
state on exit.
2018-08-25 17:30:02 -07:00
Olaoluwa Osuntokun
a7656454aa
peer: stop chanMsg streams in defer right after creation 2018-08-25 17:29:59 -07:00
Olaoluwa Osuntokun
ce115a6a59 peer: raise readHandler wait group done to defer statement
In this commit, we raise the readHandler wait group done into a defer
statement at the top of the method. This fixes an existing but that
would cause the readHandler to declare it had exited, yet possibly still
be waiting on the chan message stream below to exit.
2018-08-24 18:53:28 -07:00
Johan T. Halseth
e9066c2d34
peer: print warning if selfPolicy not found 2018-08-23 07:50:18 +02:00
Johan T. Halseth
19e3a194fa
peer+server: make fetchLastChanUpdate _always_ fetch our own update
This commit fixes a bug that would cause us to fetch our peer's
ChannelUpdate in some cases, where we really wanted to fetch our own.

The reason this happened was that we passed the peer's pubkey to
fetchLastChanUpdate, making us match on their policy. This would lead to
ChannelUpdates being sent during routing which would have no effect on
the attempted path.

We fix this by always use our own pubkey in fetchLastChanUpdate, and
also uses the common methods within the server to be able to extract the
update even when only one policy is known.
2018-08-23 07:50:18 +02:00
Johan T. Halseth
de5e9e139c
server: make extractChannelUpdate extract from set of potential policies 2018-08-23 07:50:17 +02:00
Johan T. Halseth
229fd88289
peer: use custom MinHTLC value at initial link add
This commit fixes a bug within the peer, where we would always use the
default forwarding policy when adding new links to the switch. Mostly
this wasn't a problem, as we most often are using default values for new
channels, but the min_htlc value is a value that is set by the remote,
not us.

If the remote specified a custom min_htlc during channel creation, we
would still use our DefaultMinHtlc value when first adding the link,
making us try to forward HTLCs that would be rejected by the remote.

We fix this by getting the required min_htlc value from the channel
state machine, and setting this for the link's forwarding policy.

Note that on restarts we will query the database for our latest
ChannelEdgePolicy, and use that to craft the forwardingPolicy. This
means that the value will be set correctly if the policy is found in the
database.
2018-08-23 07:50:17 +02:00
Johan T. Halseth
5deffd228c
peer: call disableChannel with disabled=false after loading channels
This to ensure now active channel is available in the router, for path
finding, as it might have been disabled if the peer has been offline a
while.
2018-08-17 23:24:13 +02:00
Johan T. Halseth
b5bfdd72b5
server+peer: rename disableChannel->announceChanStatus
Now takes a boolean whether to disable/activate, and keeps track of the
last update sent to avoid sending duplicates.
2018-08-17 23:24:12 +02:00
Conner Fromknecht
d4d90979ef
peer: increase peer write timeout to 50 seconds
Sometimes when performing an initial sync, the remote
node isn't able to pull messages off the wire because
of long running tasks and queues are saturated. With
a shorter write timeout, we will give up trying to send
messages and teardown the connection, even though the
peer is still active.
2018-08-13 21:55:32 -07:00
Conner Fromknecht
a1abb11dc5
peer: add ready chan arg to WaitForDisconnect
This commit adds additional synchronization logic to
WaitForDisconnect, such that it can be spawned before
Start has been executed by the server. Without
modification, the current version will return
immediately since no goroutines will have been
spawned.

To solve this, we modify WaitForDisconnect to block until:
 1) the peer is disconnected,
 2) the peer is successfully started,
before watching the waitgroup.

In the first case, the waitgroup will block until all
(if any) spawned goroutines have exited. Otherwise, if
the Start is successful, we can switch to watching the
waitgroup, knowing that waitgroup counter is positive.
2018-08-13 21:52:32 -07:00
Olaoluwa Osuntokun
7a113d469b
Merge pull request #1551 from cfromknecht/switch-revert-replace-link
[htlcswitch]: revert replace link, ensure removed links are stopped
2018-08-13 21:44:42 -07:00
Johan T. Halseth
64c2c6b118
peer: print ChanStatus return value, not address 2018-08-11 12:51:50 +02:00
Conner Fromknecht
5f90973f76
peer: always purge link before adding new one 2018-08-10 11:42:25 -07:00
Conner Fromknecht
1113684dc3
Revert "htlcswitch: in event of duplicate link add, prefer newer link"
This reverts commit e60d2b774a35e446081f9be2d4901925cac05379.
2018-08-10 11:42:20 -07:00
Olaoluwa Osuntokun
d3b1b9aa98
Merge pull request #1668 from cfromknecht/interface-tickers
Ticker Package
2018-08-09 20:55:25 -07:00
Wilmer Paulino
9d2eeb6304
multi: update to latest fee estimation interface 2018-08-09 17:29:52 -07:00
Conner Fromknecht
2762546eeb
peer: replace NewBatchTicker with ticker.New 2018-08-09 02:48:07 -07:00
Conner Fromknecht
60edca164c
peer: adds StartTime() used to compute backoff relaxation 2018-08-07 14:50:07 -07:00
Olaoluwa Osuntokun
07defe5f93
rpc+peer: use pkScripts for close ntfns 2018-07-31 21:28:52 -07:00
Olaoluwa Osuntokun
1e39cfc65f
Merge pull request #1364 from halseth/data-loss-protect
Data loss protection
2018-07-31 20:53:42 -07:00
Johan T. Halseth
ea6aca26a5
channeldb: make chanStatus unexported
Since the ChanStatus field can be changed from concurrent callers, we
make it unexported and add the method ChanStatus() for safe retrieval.
2018-07-31 15:07:30 +02:00
Conner Fromknecht
0efe5ca49d
peer: only pass duration to htlcswitch.NewBatchTicker 2018-07-30 22:33:37 -07:00
Olaoluwa Osuntokun
e0baa49690
Merge pull request #1387 from wpaulino/send-disable-chan-update
multi: send a channel update with disabled flag set on channel close
2018-07-23 17:46:37 -07:00
Olaoluwa Osuntokun
bca926d6af
Merge pull request #1371 from wpaulino/prune-link-nodes
server: prune link nodes without any open channels
2018-07-21 18:55:38 -07:00
Wilmer Paulino
9cedef9245
fundingmanager: send messages to peers directly
In this commit, we modify the existing message sending functionality
within the fundingmanager. Due to each mesage send requiring to hold the
server's lock to retrieve the peer, we might run into a case where the
lock is held for a larger than usual amount of time and would therefore
block on sending the message within the fundingmanager. We remedy this
by taking a similar approach to some recent changes within the gossiper.
We now keep track of each peer within the internal fundingmanager
messages and send messages directly to them.
2018-07-19 12:34:11 -07:00
Wilmer Paulino
6504a9cfa8
fundingmanager+peer: modify fundingErrorMsg to use peer key 2018-07-19 12:32:31 -07:00
Wilmer Paulino
3ab17063ff
multi: satisfy new lnpeer interface 2018-07-19 12:32:29 -07:00
Wilmer Paulino
38b52df51f
peer+server: remove persistent connections for peers with no open channels remaining 2018-07-17 17:35:30 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Wilmer Paulino
873cccc7a6
multi: send channel update with disabled active on force and coop chan closes 2018-07-11 17:07:03 -07:00
Yaacov Akiba Slama
17223c1215 peer: add write timeout within writeMessage
In this commit, we add a timeout within the writeMessage method when we go to write to the socket. We do this as otherwise, if the other peer is blocked for some reason, we'll never actually unblock ourselves, which may cause issues in other sub-systems waiting on this write call. For now, we use a value of 10 seconds, and will adjust in the future if we deem this time period too short.
2018-06-26 17:27:22 -07:00
Wilmer Paulino
b1ba83bf2b
peer: prevent processing close msg if channel is not found 2018-06-25 13:13:12 -07:00
Johan T. Halseth
55c8741e42
peer: don't stop nil channel 2018-06-19 12:48:11 +01:00
Wilmer Paulino
90a50bd893
peer: remove no longer needed block epoch 2018-06-13 19:23:44 -07:00
Wilmer Paulino
8198466972
multi: move block epochs dependency from links to switch
In this commit, we move the block height dependency from the links in
the switch to the switch itself. This is possible due to a recent change
on the links no longer depending on the block height to update their
commitment fees.

We'll now only have the switch be alerted of new blocks coming in and
links will retrieve the height from it atomically.
2018-06-13 17:41:21 -07:00
Wilmer Paulino
4cc60493d2
peer+htlcswitch: randomize link commitment fee updates
In this commit, we modify the behavior of links updating their
commitment fees. Rather than attempting to update the commitment fee for
each link every time a new block comes in, we'll use a timer with a
random interval between 10 and 60 minutes for each link to determine
when to update their corresponding commitment fee. This prevents us from
oscillating the fee rate for our various commitment transactions.
2018-06-13 17:41:01 -07:00
Olaoluwa Osuntokun
e60d2b774a
htlcswitch: in event of duplicate link add, prefer newer link 2018-06-12 00:44:30 -07:00
Olaoluwa Osuntokun
e1d8c37708
peer: only add an active link to the channelManager if addPeer succeeds
In this commit we fix an existing bug which could cause internal state
inconsistency between then switch, funding manager, and the peer. Before
this commit, we would _always_ add a new channel to the channelManager.
However, due to recent logic, it may be the case that this isn't the
channel that will ultimately reside in the link. As a result, we would
be unable to process incoming FundingLocked messages properly, as we
would mutate the incorrect channel in memory.

We remedy this by moving the inserting of the new channel into the
activeChannels map until the end of the loadActiveChannels method, where
we know that this will be the link that persists.
2018-06-12 00:44:26 -07:00
Conner Fromknecht
edf08458c1
peer: changes to satisfy lnpeer.Peer
This commit adds:
 - variadic SendMessage method (w/ sync bool reorder)
 - passes peer object directly to ProcessRemoteAnnouncment
 - adds IdentityKey() method for lnpeer.Peer
2018-06-08 13:47:57 -07:00
maurycy
3be08e69cf multi: 64bit aligment of atomic vars on arm/x86-32 2018-06-04 20:02:34 -07:00
Olaoluwa Osuntokun
210e28a483
peer: add messages summaries for the new gossip query messages 2018-05-31 16:30:56 -07:00
Olaoluwa Osuntokun
40bb19eb6e
peer: dispath new gossip query messages to the gossiper 2018-05-31 16:30:55 -07:00
Olaoluwa Osuntokun
bfcdbe2204 peer: when failing link, depend on server wg, not peer
In this commit, we fix a recently introduced bug. The issue is that
while we're failing the link, the peer we're attempting to force close
on may disconnect. As a result, if the peerTerminationWatcher exits
before we can add to the wait group (it's waiting on that), then we'll
run into a panic as we're attempting to increment the wait group while
another goroutine is calling wait.

The fix is to first check that the server isn't shutting down, and then
use the server's wait group rather than the peer to synchronize
goroutines.

Fixes #1285.
2018-05-25 20:36:40 -07:00
Johan T. Halseth
3b2fd32523
peer: populate OnChannelFailure in link config
This commit makes the peer aware of the LinkFailureErrors that can
happen during link operation, and making it start a goroutine to
properly remove the link and force close the channel.
2018-05-25 06:58:23 +02:00
Johan T. Halseth
4836a25c98
peer: move link creation into new method 2018-05-25 06:54:05 +02:00
Johan T. Halseth
bb611e065d
peer: don't pass closeCtx to chanCloser 2018-05-22 12:06:33 +02:00
Olaoluwa Osuntokun
f0050e7ffb
Merge pull request #1201 from lightningnetwork/peer-async-disconnect
server: Peer Async Disconnect w/ Scheduled peerConnected
2018-05-10 17:05:16 -07:00
Olaoluwa Osuntokun
b271ed5ffb
Merge pull request #1199 from cfromknecht/queue-msg-err-chans
peer/server: Remove Broadcast err chans
2018-05-10 16:55:57 -07:00
Conner Fromknecht
a2f7170ff0
peer: make Disconnect async, block on WaitForDisconnect 2018-05-08 16:37:14 -07:00
Conner Fromknecht
0691b21a30
peer: improves disconnect handling
This commit attempts to resolve some potential deadlock
scenarios during a peer disconnect.

Currently, writeMessage returns a nil error when disconnecting.
This should have minimal impact on the writeHanlder, as the
subsequent loop selects on the quit chan, and will cause it to
exit. However, if this happens when sending the init message,
the Start() method will attempt to proceed even though the peer
has been disconnected.

In addition, this commit changes the behavior of synchronous
write errors, by using a non-blocking select. Though unlikely,
this prevents any cases where multiple errors are returned, and
the errors are not being pulled from the other side of the errChan.
This removes any naked sends on the errChan from stalling the peer's
shutdown.
2018-05-08 16:35:49 -07:00
Olaoluwa Osuntokun
72f48b6abe
htlcswitch+server: ensure we always send an update w/ a TempChannelFailure
In this commit, we ensure that any time we send a TempChannelFailure
that's destined for a multi-hop source sender, then we'll always package
the latest channel update along with it.
2018-05-08 13:00:28 -04:00
Olaoluwa Osuntokun
d72f28839d
Merge pull request #1104 from halseth/chainwatcher-handoff-race
Fix chainwatcher handoff race
2018-05-03 17:18:31 -07:00
Olaoluwa Osuntokun
ecfde2e85f
Merge pull request #1149 from cfromknecht/trim-pending-htlc-index
Trim Open Circuits Using HTLC Index of Pending Commitments
2018-05-03 16:45:29 -07:00
Olaoluwa Osuntokun
5f059e74cb
peer: ensure msgConsumer sets the shutdown variable on exit
In this commit, we fix a bug that could at times cause a deadlock when a
peer is attempting to disconnect. The issue was that when a peer goes to
disconnect, it needs to stop any active msgStream instances. The Stop()
method of the msgStream would block until an atomic variable was set to
indicate that the stream had fully exited. However, in the case that we
disconnected lower in the msgConsumer loop, we would never set the
streamShutdown variable, meaning that msgStream.Stop() would never
unblock.

The fix for this is simple: set the streamShutdown variable within the
quit case of the second select statement in the msgConsumer goroutine.
2018-05-03 15:45:22 -07:00
Conner Fromknecht
701d37725c
peer: extract hodl mask, remove htlchodl mode 2018-05-02 00:18:51 -07:00
Johan T. Halseth
08f1a3689d
peer: don't pass bool to SubscribeChannelEvents 2018-05-02 08:43:32 +02:00
Johan T. Halseth
bd4e717971
peer: don't load channels that have had commitment broadcasted 2018-04-25 09:37:24 +02:00
practicalswift
663c396235 multi: fix a-vs-an typos 2018-04-17 19:02:04 -07:00
Olaoluwa Osuntokun
ffabb17ce6
peer: use new fetchLastChanUpdate method to populate the ChannelLinkConfig 2018-04-06 14:52:01 -07:00
Olaoluwa Osuntokun
7cbe78eeee
peer: re-use a static writeBuf within writeMessage optimize memory usage
In this commit, we might a very small change to the way writing messages
works in the peer, which should have large implications w.r.t reducing
memory usage amongst chatty nodes.

When profiling the heap on one of my nodes earlier, I noticed this
fragment:
```
Showing top 20 nodes out of 68
      flat  flat%   sum%        cum   cum%
         0     0%     0%    75.53MB 54.61%  main.(*peer).writeHandler
   75.53MB 54.61% 54.61%    75.53MB 54.61%  main.(*peer).writeMessage
```

Which points to an inefficiency with the way we handle allocations when
writing new messages, drilling down further we see:
```
(pprof) list writeMessage
Total: 138.31MB
ROUTINE ======================== main.(*peer).writeMessage in /root/go/src/github.com/lightningnetwork/lnd/peer.go
   75.53MB    75.53MB (flat, cum) 54.61% of Total
         .          .   1104:   p.logWireMessage(msg, false)
         .          .   1105:
         .          .   1106:   // As the Lightning wire protocol is fully message oriented, we only
         .          .   1107:   // allows one wire message per outer encapsulated crypto message. So
         .          .   1108:   // we'll create a temporary buffer to write the message directly to.
   75.53MB    75.53MB   1109:   var msgPayload [lnwire.MaxMessagePayload]byte
         .          .   1110:   b := bytes.NewBuffer(msgPayload[0:0:len(msgPayload)])
         .          .   1111:
         .          .   1112:   // With the temp buffer created and sliced properly (length zero, full
         .          .   1113:   // capacity), we'll now encode the message directly into this buffer.
         .          .   1114:   n, err := lnwire.WriteMessage(b, msg, 0)
(pprof) list writeHandler
Total: 138.31MB
ROUTINE ======================== main.(*peer).writeHandler in /root/go/src/github.com/lightningnetwork/lnd/peer.go
         0    75.53MB (flat, cum) 54.61% of Total
         .          .   1148:
         .          .   1149:                   // Write out the message to the socket, closing the
         .          .   1150:                   // 'sentChan' if it's non-nil, The 'sentChan' allows
         .          .   1151:                   // callers to optionally synchronize sends with the
         .          .   1152:                   // writeHandler.
         .    75.53MB   1153:                   err := p.writeMessage(outMsg.msg)
         .          .   1154:                   if outMsg.errChan != nil {
         .          .   1155:                           outMsg.errChan <- err
         .          .   1156:                   }
         .          .   1157:
         .          .   1158:                   if err != nil {
```

Ah hah! We create a _new_ buffer each time we want to write a message
out. This is unnecessary and _very_ wasteful (as seen by the profile).
The fix is simple: re-use a buffer unique to each peer when writing out
messages. Since we know what the max message size is, we just allocate
one of these 65KB buffers for each peer, and keep it around until the
peer is removed.
2018-04-06 12:55:17 -07:00
Olaoluwa Osuntokun
ca9174e166
peer: extend SendMessage to allow callers to block until msg is sent 2018-04-04 17:43:57 -07:00
Olaoluwa Osuntokun
447a031435
peer: reject remote closes with active HTLCs
In this commit, we follow up to the prior commit by ensuring we won't
accept a co-op close request for a chennel with active HTLCs. When
creating a chanCloser for the first time, we'll check the set of HTLC's
and reject a request (by sending a wire error) if the target channel
still as active HTLC's.
2018-03-30 13:06:57 -07:00
Olaoluwa Osuntokun
e7d66e1dfd
peer: don't d/c peer if we encounter lnwire.ErrUnknownAddrType
In this commit, we fix a minor deviation in our implementation from the
specification. Before if we encountered an unknown error type, we would
disconnect the peer. Instead, we’ll now just continue along parsing the
remainder of the messages. This was flared up recently by some
c-lightning related incompatibilities that emerged on main net.
2018-03-23 15:49:33 -07:00
Olaoluwa Osuntokun
fda3b871c1
peer: ensure we stop the channel if error happens in loadActiveChannels
In this commit, we fix a goroutine leak that could occur if while we
were loading an error occurred in any of the steps after we created the
channel object, but before it was actually loaded in to the script. If
an error occurs at any step, we ensure that we’ll stop toe channel.
Otherwise, the sigPool goroutines would still be lingering and never be
stopped.
2018-03-19 19:14:55 -07:00
Conner Fromknecht
c1f0c4ffda
peer: DecodeOnionObfuscator -> ExractErrorEncrypter 2018-03-13 16:33:29 -07:00
Johan T. Halseth
a6c2550404
peer: track failed channels
This commit adds a set used to track channels we consider failed. This
is done to ensure we don't end up in a connect/disconnect loop when we
attempt to re-sync the channel state of a failed channel with a peer.
2018-03-13 11:11:17 +01:00
Olaoluwa Osuntokun
53045450ad
Merge pull request #823 from Roasbeef/chan-stream-buf-limit
peer: modify the msgStream to not buffer messages off the wire indefi…
2018-03-12 19:39:48 -07:00
Olaoluwa Osuntokun
c285bb5814 htlcswitch+peer: remove DecodeHopIterator from ChannelLinkConfig
In this commit, we remove the DecodeHopIterator method from the
ChannelLinkConfig struct. We do this as we no longer use this method,
since we only ever use the DecodeHopIterators method now.
2018-03-12 18:58:08 -07:00
Olaoluwa Osuntokun
60c8257c3c
peer: modify the msgStream to not buffer messages off the wire indefinitely
In this commit, we modify the msgStream struct to ensure that it has a
cap at which it’ll continue to buffer messages. Currently we have two
msgStream structs per peer: the first for the discovery messages, and
the second for any messages that modify channel state. Due to
inefficiencies in the current protocol for reconciling graph state upon
connection (just dump the entire damn thing), when a node first starts
up, this can lead to very high memory usage as all peers will
concurrently send their initial message dump which can be in the
thousands of messages on testate.

Our fix is simple: make the message stream into a _bounded_ message
stream. The newMsgStream function now has a new argument: bufSize.
Internally, we’ll take this bufSize and create more or less an internal
semaphore for the producer. Each time the producer gets a new message,
it’ll try and read an item from the channel. If the queue still has
size, then this will succeed immediately. If not, then we’ll block
until the consumer actually finishes processing a message and then
signals by sending a new item into the channel.

We choose an initial value of 1000. This was chosen as there’s already
a max limit of outstanding adds on the commitment, and a value of 1000
should allow any incoming messages to be safely flushed and processed
by the gossiper.
2018-03-12 16:34:59 -07:00
Johan T. Halseth
80ef16e853
peer: hand lnwire.Error to fndgMngr or link depending on chanID 2018-03-11 17:21:23 +01:00
Conner Fromknecht
972d238f04
peer: remove Switch from channel link config 2018-03-09 21:18:15 -08:00
Conner Fromknecht
d468a36d69
peer: pass unsafe-replay to link config 2018-03-09 21:18:15 -08:00
Conner Fromknecht
8d0e3dc467
peer: adds FwdPkgGCTicker to channel configs 2018-03-09 21:18:14 -08:00
Conner Fromknecht
0e4be6a04a
peer: init link with batched sphinx processing 2018-03-09 21:18:14 -08:00
Johan T. Halseth
b9d1eceda3
peer: use EstimateFeePerVSize 2018-02-26 22:42:26 +01:00
MeshCollider
2c2ed3c6a9 multi: Unify use of NodeKey in log messages 2018-02-19 17:48:39 -08:00
MeshCollider
915c4201b9 multi: remove internal peer_id usage 2018-02-19 17:48:39 -08:00
practicalswift
b8e1351cf3 multi: fix some recently introduced typos 2018-02-18 15:27:29 -08:00
Olaoluwa Osuntokun
2e090ee2ab
peer: only return a channel snapshot if the channel can route
In this commit, we fix a slight miscalculation within the GetInfo call.
Before this commit, we would list any channel that the peer knew of as
active, instead of those which are, well, actually *active*. We fix
this by skipping any channels that we don’t have the remote revocation
for.
2018-02-08 19:40:54 -08:00
Olaoluwa Osuntokun
22951cb364
lnd: account for new lnwire.Sig API and channeldb API changes 2018-02-06 20:14:33 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Johan T. Halseth
26a80f86b8
peer: set BatchTicker and BatchSize in channellink config 2018-02-02 21:16:37 -05:00
Olaoluwa Osuntokun
0a4de859a2
discovery+routing: reduce number of active validation barrier jobs
In order to reduce high CPU utilization during the initial network view
sync, we slash down the total number of active in-flight jobs that can
be launched.
2018-01-28 14:55:32 -08:00
Olaoluwa Osuntokun
d4e650c85d
peer: the chancloser no longer needs to notify the breach arb of settled transactions 2018-01-22 19:19:59 -08:00
Olaoluwa Osuntokun
5df6704a9c
contractcourt: make synchronous chain watcher notifications optional
In this commit, we modify the way that notifications are dispatched
within the chainWatcher. Before we would *always* wait for an ack back
before we started to clean up he database state. This would at times
lead to deadlocks. To remedy this, we now allow callers to decide if
they want notifications to be sync or not. The only current caller that
requires this is the breach arbiter.
2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
3ec83cc82f
peer+contractcourt: delegate watching for co-op closes to the chainWatcher
In this commit, we modify the interaction between the chanCloser
sub-system and the chain notifier all together. This fixes a series of
bugs as before this commit, we wouldn’t be able to detect if the remote
party actually broadcasted *any* of the transactions that we signed off
upon. This would be rejected to the user by having a “zombie” channel
close that would never actually be resolved.

Rather than the chanCloser watching for on-chain closes, we’ll now open
up a co-op close context to the chainWatcher (via a layer of
indirection via the ChainArbitrator), and report to it all possible
closes that we’ve signed. The chainWatcher will then be able to launch
a goroutine to properly update the database state once any of the
possible closure transactions confirms.
2018-01-22 19:19:53 -08:00
Olaoluwa Osuntokun
69e6ec9954
peer+funding: remove unneeded channel handoff code with the breach arbiter
We no longer need to hand off new channels that come online as the
chainWatcher will be persistent, and always have an active signal for
the entire lifetime of the channel.
2018-01-22 19:19:50 -08:00
Olaoluwa Osuntokun
defa1bc3e3
peer: when creating new links, obtain an on-chain events subscription 2018-01-22 19:19:49 -08:00
Olaoluwa Osuntokun
24a16b4f49
lnd: properly initialize entities of new contractcourt package 2018-01-22 19:19:42 -08:00
Olaoluwa Osuntokun
b1fe0c12bf
peer: ensure that any active msgStreams properly exit upon peer D/C
In this commit, we modify the logic within the Stop() method for
msgStream to ensure that the main goroutine properly exits. It has been
observed on running nodes with tens of connections, that if a node is
very flappy, then the node can end up with hundreds of leaked
goroutines.

In order to fix this, we’ll continually signal the msgConsumer to wake
up after the quit channel has been closed. We do this until the
msgConsumer sets a bool indicating that it has exited atomically.
2018-01-08 19:50:22 -08:00
Conner Fromknecht
44805be8d9
peer: filter borked channels when loading active chans 2018-01-05 13:47:18 -08:00
Johan T. Halseth
25b77a0aee peer: add error chan to queueMsg 2017-12-19 13:01:59 -06:00
Matt Drollette
adf0d98194 multi: fix several typos in godoc comments 2017-12-17 18:40:05 -08:00
Olaoluwa Osuntokun
ecf58d64f7
peer: properly route UpdateFailMalformedHTLC messages to the switch
This commit adds an overlooked case into the main type switch statement
within the peer’s readHandler. Before this commit, we would fail to
process any UpdateFailMalformedHTLC messages, possibly leading to a
commitment desynchronization. To avoid this case, we’ll no properly
process the UpdateFailMalformedHTLC message by sending the message to
an active link registered to the switch.
2017-12-12 11:22:50 -08:00
Olaoluwa Osuntokun
ce6dee6ee4
peer: check LocalUnrevokedCommitPoint for nil-ness as it's optional
In this commit, we modify the logWireMessage function to ensure that we
don't attempt to nil out the LocalUnrevokedCommitPoint.Curve field
unless it's actually set. We need to do this as the field as actually
optional, and we may be reading a message from a node that doesn't
support the option.

Fixes #461.
2017-12-07 13:11:23 -08:00