Commit Graph

73 Commits

Author SHA1 Message Date
Johan T. Halseth
aea902b788
Merge pull request #3847 from halseth/lnd-test-csv-flake
lnd test: fix csv mempool sweep time
2019-12-19 19:40:37 +01:00
Conner Fromknecht
396a978cec
lntest+wait: replace sleeps in assertAmountSent
This commit constructs a helper closure assertAmountSent that can be
reused by other functions. The closure returns an error so that it can
be used with wait.NoError or the new wait.InvariantNoError. The latter
is added since the predicate could otherwise pass immediately for the
sphinx_replay_persistence tests, but change shortly after. It also
rounds out the wait package so that we offer all combinations of
predicate and no-error style waits.
2019-12-18 23:57:12 -08:00
Johan T. Halseth
7044219f90
lnd test: fix csv mempool sweep time
Since CSV locked outputs specifies the first block where they are
allowed to be included, they can actually be added one block earlier
into the mempool.

This led to a flake, where the sweep tx was already in the mempool at
the time we mined the last block, causing the next mempool check to
fail.
2019-12-17 15:29:27 +01:00
Joost Jager
b2f43858c3
invoices: accept mpp payments 2019-12-11 16:14:49 +01:00
Conner Fromknecht
f3398c0c0e
Merge pull request #3789 from cfromknecht/coop-close-rpc-status
republish force and coop closes on startup
2019-12-05 10:35:53 -08:00
Conner Fromknecht
4c30f7d5de
Merge pull request #3719 from guggero/scb-unconfirmed-channels
chanbackup: encode broadcast height in chan ID for unconfirmed channels
2019-12-04 19:26:24 -08:00
Conner Fromknecht
0610578abb
lntest/itest/lnd_test: assert coop close chan status
This commit adds an itest assertion to check that a coop closed
channel's status is properly refelcted in list channels. We also fix a
race condition that prevented the rpc from being externally consistent
by marking the close sooner in the pipeline.
2019-12-04 14:25:29 -08:00
Oliver Gugger
a124bb24da
lntest: add unconfirmed channel SCB test 2019-11-28 08:59:38 +01:00
Olaoluwa Osuntokun
d59aba35a0 Merge branch 'refresh-chan-id' 2019-11-27 15:21:42 -06:00
Olaoluwa Osuntokun
5bdb0d3d66
channeldb+lntest: code style fixes 2019-11-27 15:21:28 -06:00
Roei Erez
8b3dd9415e channeldb: refresh channel state within RefreshShortChanID
Refresh channel memory state whenever the short channel id is refreshed.
This is to make the in-memory channel consistent with the disk data.

Fixes #3765.
2019-11-27 15:10:00 -06:00
Wilmer Paulino
75dbfba4ec
lntest: lower cpfp fee due to new bitcoind max fee restriction 2019-11-25 12:40:01 -08:00
Conner Fromknecht
a83958408d
Merge pull request #3648 from cfromknecht/safe-disconnect
config+itest: allow unsafe disconnect by default
2019-11-22 21:07:17 -08:00
Olaoluwa Osuntokun
74849e7325
Merge pull request #3737 from guggero/resume-scb
chanbackup: continue recovery if channel already exists
2019-11-22 19:40:47 -08:00
Conner Fromknecht
4c5b251748
Merge pull request #3750 from halseth/itest-flake-replacement-forceclose
lnd_test: fix race condition on simultanous force closes
2019-11-22 13:59:31 -08:00
Olaoluwa Osuntokun
6f9fcfaccc
Merge pull request #3499 from cfromknecht/mpp-payments-rpc
channeldb+rpcserver: expose legacy payments as multi-path payments
2019-11-21 18:38:53 -08:00
Johan T. Halseth
08803e2e41
lnd_test: fix race condition on simultanous force closes
This fixes an issue that would lead to a flake during intergration
tests. Carol would start up with a outdated state and attempt to force
close the channel. At the same time she would connect to Dave,
triggering the dataloss protection. Dave would respond by force closing
the channel, and Dave transaction would in some cases have a higher fee,
resulting Carol's tx being replaced.

We fix this by suspending Dave until Carol's close tx is mined.
2019-11-21 13:43:29 +01:00
Johan T. Halseth
b1e6d9c5cf
Merge pull request #1152 from guggero/macaroon-integrationtest
itest: add tests for macaroon authentication
2019-11-21 09:22:28 +01:00
Olaoluwa Osuntokun
32965fd4be
rpc: update AbandonChannel to remove state from cnct, nursery and graph
In this commit, we update the `AbandonChannel` method to also remove the
state from the countract court as well as the channel graph. Abandoning
a channel is now a three step process: remove from the open channel
state, remove from the graph, remove from the contract court. Between
any step it's possible that the users restarts the process all over
again. As a result, each of the steps below are intended to be
idempotent.

We also update the integration test to assert that no channel is found
in the graph any longer. Before this commit, this test would fail as the
channel was still found in the graph, which can cause other issues for
an operational daemon.

Fixes #3716.
2019-11-20 17:42:58 -08:00
Oliver Gugger
570275435b
lntest: add SCB repeated restore test 2019-11-20 10:57:20 +01:00
Conner Fromknecht
e9eabed99c
lntest: assert mpp fields in listpayments 2019-11-19 20:41:58 -08:00
Conner Fromknecht
216b933d9b
config+itest: allow unsafe disconnect by default
This commit beings the process of deprecating unsafe-disconnect. Many
moons ago this was disallowed to prevent concurency bugs surrounding
reconnect. Despite the name, it has been safe to enable this feature for
well over a year, as several PRs have been merged that addressed the
possible issues that existed when the feature was added.
2019-11-19 20:13:04 -08:00
Conner Fromknecht
c9c7216768
lntest/itest: remove global alice and bob from disconnect test
This will allow us to start Alice and Bob with additional arguments once
we switch to making unsafe-disconnect true by default.
2019-11-19 20:12:29 -08:00
Conner Fromknecht
8e10da03c7
lntest/itest: move chanpoint instantiation down to where it's used 2019-11-19 20:12:07 -08:00
Oliver Gugger
543b258e30
lnd_test: add integration test for macaroon authentication 2019-11-14 16:34:52 +01:00
Conner Fromknecht
540e44e186
lntest/itest: expand testSingleHopSendToRoute matrix
In this commit, we refactor the testSingleHopSendToRoute test to support
table driven tests for various endpoints and payment types. Currently
only the main rpcserver's SendToRoute is tested, so we also add
support the SendToRouteSync and the routerrpc's SendToRoute.

The tests are also modified to have each endpoint perform a single-hop,
single-shot MPP payment. This asserts that the Hop messages are being
properly unmarshalled and that setting correctly yields a successful
payment. At the momemnt the receiver does not actually verify or use the
MPP fields presented in the onion, though this test will be expanded
later as those pieces are assembled.
2019-11-04 15:11:55 -08:00
Conner Fromknecht
18a06b0ed3
lntest: remove unnecessary wait from single-hop sendtoroute
We already wait for all channels to open before creating the payment
requests.
2019-11-04 15:11:39 -08:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Lars Lehtonen
085a63fee5
lntest: stdlib context 2019-09-28 15:43:42 -07:00
Olaoluwa Osuntokun
e497a07d64
lntest/itest: extend basic funding test to cover all tweakless commitment cases 2019-09-25 18:26:10 -07:00
Johan T. Halseth
97093b4223
lntest/itest: wait for on-chain balance restore
We add a wait predicate to make sure the node's on-chain balance is
restored before continuing the restore test case.

This is needed since the DLP test scenario includes several restarts of
the node, and if the node isn't done scanning for on-chain balance
before the restart happens, it would be unlocked without a recovery
window, causing funds to be left undiscovered.
2019-09-25 14:04:44 +02:00
Olaoluwa Osuntokun
9b1ecbd3fa
Merge pull request #2485 from halseth/error-codes-dont-send
[lnwire+funding] Don't send ErrorCode on wire
2019-09-23 17:50:27 -07:00
Valentine Wallace
4b9da07e78
rpcserver+lnrpc: allow users to update max HTLC channel policies
In this commit, we enable callers of UpdateChannelPolicy to
specify their desired max HTLC forwarding policy for one or
multiple channels.
2019-09-23 13:07:12 +02:00
Johan T. Halseth
ff37b711c6
funding: dont's send ErrorCode on wire
Since the ErrorCodes are not part of the spec, they cannot be read by
other implementations.

Instead of only sending the error code we therefore send the complete
error message. This will have the same effect at the client, as it will
just get the full error instead of the code indicating which error it
is. It will also be compatible with other impls.

Note that the GRPC error codes will change, since we don't set them
anymore.
2019-09-20 10:55:20 +02:00
Conner Fromknecht
1d41d4d666
multi: move WaitPredicate, WaitNoError, WaitInvariant to lntest/wait 2019-09-19 12:46:29 -07:00
Johan T. Halseth
01f696afce
Merge pull request #3487 from matheusd/lnd-fix-extra-dave
itest: Shutdown final Dave node in testChanRestore
2019-09-12 14:55:53 +02:00
Matheus Degiovani
d6286e9463
itest: Shutdown final Dave node in testChanRestore
This changes the defer function in the test for channel backups to
correctly close over the 'dave' variable.

Without this closure, the shutdownAndAssert call would attempt to
shutdown the original (non-restored) dave instead of the most recently
created (restored) dave, causing a leak of a node during tests.
2019-09-10 09:26:24 -03:00
Johan T. Halseth
d7f0372fa2
lntest/itest: use timeout constants in rejectHTLC test
The local timeout could be too short for certain backends.
2019-09-02 12:05:51 +02:00
Johan T. Halseth
168fc4e1ab
lntest/itest: cleanup force closed channel in testSendUpdateDisableChannel
Otherwise following tests would be flaky because of unexpected sweep transaction in the mempool.
2019-09-02 09:37:37 +02:00
Johan T. Halseth
35f3544111
lnd_test: use RegTest instead of SimNet during integration tests 2019-09-02 09:37:23 +02:00
Wilmer Paulino
578df81fb2
lntest/itest: resolve mempool flake in multi-hop htlc local timeout test
The test assumed that transactions would be broadcast and confirmed at
incorrect heights. Due to timing issues, it was possible for the test to
still succeed, resulting in a flake.

The test assumes that Bob will sweep a pending outgoing HTLC and commit
output back to their wallet. This commit ensures that these operations
are done when expected, i.e.:

1. Bob force closes the channel due to the HTLC timing out.
2. Once the channel is confirmed, Bob broadcasts their HTLC timeout
transaction.
3. Bob broadcasts their commit output sweep transaction once its CSV
expires.
4. Bob broadcasts their second layer sweep transaction for the timed out
HTLC once its CSV expires.
2019-08-30 12:15:14 -07:00
Wilmer Paulino
47a8cd36f7
lntest/itest: prevent direct connection within testNodeAnnouncement
Alice and Dave don't need to be connected in order to receive the node
announcement as we assume that she can receive it from Bob because they
are connected at the beginning of every test.
2019-08-29 18:04:13 -07:00
Johan T. Halseth
9ef66f568f
Merge pull request #2203 from ccdle12/reject-htlc-option
htlcswitch+config+server: adding RejectHTLC flag
2019-08-26 14:53:32 +02:00
Olaoluwa Osuntokun
b1aea41d20
lntest/itest: force dave to use the legacy onion payload in multi-hop pay test
In this commit, we force Dave to use the legacy onion payload for the
multi-hop test to ensure that we're able to properly mix the old and new
formats, and have all nodes properly decode+forward the HTLC.
2019-08-22 18:53:10 -07:00
Olaoluwa Osuntokun
2f8d3c4526
Merge pull request #3256 from joostjager/failure-attribution
routing: failure attribution
2019-08-20 16:53:56 -07:00
ccdle12
05d0d028bc
htlcswitch+config+server: Adds a rejecthtlc flag that disables forwarded
htlcs

config: Adding RejectHTLC field in config struct

This commit adds a RejectHTLC field in the config struct in config.go.
This allows the user to run lnd as a node that does not accept onward
HTLCs.

htlcswitch/switch: Adding a field RejectHTLC to the switch config

This commit adds a field RejectHTLC to the switch config. When the
switch receives an HTLC it will check this flag and if the HTLC is not
from the source hop, the HTLC will be rejected.

htlcswitch/switch: adding check for RejectHTLC flag and incomingChanID

This commit adds a check when receiving UpdateAddHTLC. The check looks
for the RejectHTLC flag set and whether the HTLC is from the sourceHop
(the local switch). If the HTLC is not from the sourceHop, then we
reject the HTLC and return a FailChannelDisabled error.

server: adding RejectHTLC field to initialization of switch

lnd_test: adding test for RejectHTLC

This commit adds a test which tests that a node with the --rejecthtlc
flag will reject any onward HTLCs but still can receive direct HTLCs and
can send HTLCs.
2019-08-20 11:01:44 +01:00
Joost Jager
67e40d4433
htlcswitch: always assume an onion error for malformed htlc failures
Previously a temporary channel failure was returning for unexpected
malformed htlc failures. This is not what we want to communicate to the
sender, because the sender may apply a penalty to us only.

Returning the temporary channel failure is especially problematic if we
ourselves are the sender and the malformed htlc failure comes from our
direct peer. When interpretating the failure, we aren't able to
distinguish anymore between our channel not having enough balance and
our peer sending an unexpected failure back.
2019-08-17 10:24:05 +02:00
Joost Jager
4dd054ae90
multi: remove debug invoices
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.

Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
2019-08-14 21:33:03 +02:00
Joost Jager
f1769c8c8c
routing: convert to node pair based
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
2019-08-13 19:21:37 +02:00
Joost Jager
aabd68ebcd
multi: rename FailUnknownPaymentHash to FailIncorrectDetails
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
2019-08-08 11:04:17 +02:00