Commit Graph

272 Commits

Author SHA1 Message Date
carla
1ad395ec3f
htlcswitch: add failure details to incoming failures
This commit adds LinkErrors with failure details to htlcs which fail on
our incoming link. This change is made with the intention of notifying
detailed htlc failure reasons in sendHTLCError. The FailureDetail
interface is implemented on FailureResolutionResults so that they can
directly be used to enrich LinkErrors. sendHtlcError is updated to
take a LinkError in preparation for the addition of a htlcnotifier
which will notify the detail of the error.
2020-02-06 19:43:39 +02:00
carla
74e0d545fe
htlcswitch: add linkError field to htlcpacket
This commit adds a linkError field to track the value of failures
which occur at our node. This field is set when local payments or
multi hop htlcs fail in the switch or on our outgoing link. This
addition is required for the addition of a htlc notifier which will
notify these failures in handleDownstreamPacket.

The passing of link error to failAddPacket removes the need for an
additional error field, because the link error's failure detail will
contain any additional metadata. In the places where the failure detail
does not cover all the metadata that was previously supplied by addr
err, the error is logged before calling failAddPacket so that this
change does not reduce the amount of information we log.
2020-02-06 19:43:29 +02:00
carla
bdd9411bbd
htlcswitch: rename FailureDetail to OutgoingFailure
Rename FailureDetail in a separate commit so that a FailureDetail
interface can be introduced in the following commit.
OutgoingFailureOnionDecode is renamed to OutgoingFailureDecodeError
to specifically indicate that we could not decode the wire
failure that our payment experienced.
2020-02-06 19:43:14 +02:00
carla
2569b4d08a
multi: replace htlcResolution with an interface
This commit repalces the htlcResolution struct with an interface.
This interface is implemeted by failure, settle and accept resolution
structs. Only settles and fails are exported because the existing
code that handles htlc resolutions uses a nil resolution to indicate
that a htlc was accepted. The accept resolution is used internally
to report on the resolution result of the accepted htlc, but a nil
resolution is surfaced. Further refactoring of all the functions
that call NotifyExitHopHtlc to handle a htlc accept case (rather than
having a nil check) is required.
2020-02-06 19:41:36 +02:00
carla
f430fd50c5
htlcswitch: use LinkError for internal errors
Update the ChannelLink interface to specifically
return the LinkError struct. This error implements
the ClearTextError interface, so will be picked
up as a routing realted error by the router.

With LinkErrors implemented, the switch now
returns a LinkError for all failures on our
incoming/outgoing link and ForwardingError when
the failure occurs down the line.
2020-01-14 15:21:15 +02:00
carla
e0c86f1e71
htlcswitch+invoices: fail mpp timeouts with FailMPPTimeout
This commit adds a getResolutionFailure function
which returns an appropriate wire failure based
on the outcome of a htlc resolution. It also updates
 the MissionControlStore test to ensure that lnd
can handle failures which occur due to mpp timeout.
2019-12-20 13:02:02 +02:00
carla
d2e395d5f2
multi: replace errInvoiceNotFound with resolution result
This commit moves handling of invoice not found
errors into NotifyExitHopHtlc and exposes a
resolution result to the calling functions. The
intention of this change is to make calling
functions as naive of the invoice registry's
mechanics as possible.

When NotifyExitHopHtlc is called and an invoice
is not found, calling functions can take action
based on the HtlcResolution's InvoiceNotFound
outcome rather than having to add a special error
check on every call to handle the error.
2019-12-20 13:01:15 +02:00
carla
7b5dda0417
invoices: add resolution result to htlcResolution
This commit adds the resolution result obtained
while updating an invoice in the registry to
htlcResolution. The field can be used by calling
functions to determine the outcome of the
update and act appropriately.
2019-12-20 13:00:53 +02:00
carla
ebfbc48973
link+contractcourt: rename processHodlEvent to processHtlcResolution 2019-12-20 12:59:56 +02:00
carla
2c1eb17192
mutli: rename HodlEvent to HtlcResolution
This commit renames HodlEvent to HtlcResolution
to better reflect the fact that the struct is
only used for htlc settles and cancels, and that
it is not specifically used for hodl invoices.
2019-12-20 12:58:07 +02:00
Joost Jager
ddb98fcc41
multi: distinguish between htlc in and out constraints 2019-12-11 00:16:57 +01:00
Olaoluwa Osuntokun
06e8d1c5ca
htlcswitch: fix inconsistency between attribute name and godoc comment 2019-12-04 15:10:39 -08:00
Joost Jager
0b5afa64f3
htlcswitch: remove logCommitTick
Replace logCommitTick as a way to deal with revocation window exhaustion
by retrying to update the commit tx when the remote revocation is
received.

The rationale is that the revocation window always opens up because of a
revoke message that is received from the other party. It is therefore
not necessary to set a timer for this. The reception of the revoke
message is the trigger to send a new commit sig if necessary.
2019-11-06 09:21:33 +01:00
Joost Jager
5078d662ef
htlcswitch: remove batch counter
Now that channel exposes the number of pending local updates, it is no
longer necessary to track the batch size separately in the link.
2019-11-06 09:21:29 +01:00
Joost Jager
2482d84d7d
htlcswitch: stop batch timer if there are no updates 2019-11-06 09:21:27 +01:00
Joost Jager
03b32d046a
htlcswitch+lnwallet: replace updateNeeded by check on channel itself
Instead of tracking local updates in a separate link variable, query
this state from the channel itself.

This commit also fixes the issue where the commit tx was not updated
anymore after a failed first attempt because the revocation window was
closed. Also those pending updates will be taken into account when the
remote party revokes.
2019-11-06 09:21:25 +01:00
Joost Jager
f59b4d62bf
htlcswitch: check for signature owed in link
Previously the channel method FullySynced was used to decide whether to
send a new commit sig message. However, it could happen that FullySynced
was false, but that we didn't owe a commitment signature. Instead we
were waiting on the other party to send us a signature. If that
happened, we'd send out an empty commit sig. This commit modifies the
condition that triggers a new commit sig and fixes this deviation from
the spec.
2019-11-06 09:21:23 +01:00
Conner Fromknecht
9e9b912d3a
multi: replace NotifyExitHopHtlc eob param with hop.Payload 2019-11-04 15:10:32 -08:00
Conner Fromknecht
70708e2e71
htlcswitch: return hop.Payload from HopIterator 2019-11-04 15:10:15 -08:00
Olaoluwa Osuntokun
acd8a6e302
Merge pull request #3470 from cfromknecht/invalid-onion-payload
htlcswitch+lnwire: invalid onion payload
2019-11-01 18:58:00 -07:00
Olaoluwa Osuntokun
4592f87033
Merge pull request #3653 from Roasbeef/external-funding-chainfees
chainfees: create new chainfees package extracting fees from lnwallet
2019-10-31 17:44:00 -07:00
Olaoluwa Osuntokun
777ed104a3
chainfee: create new chainfee package extracting fees from lnwallet
In this commit, we create a new chainfee package, that houses all fee
related functionality used within the codebase. The creation of this new
package furthers our long-term goal of extracting functionality from the
bloated `lnwallet` package into new distinct packages. Additionally,
this new packages resolves a class of import cycle that could arise if a
new package that was imported by something in `lnwallet` wanted to use
the existing fee related functions in the prior `lnwallet` package.
2019-10-31 16:41:57 -07:00
Olaoluwa Osuntokun
a73ee28e46
multi: convert the existing channeldb.ChannelType uint8 into a bit field
In this commit, we convert the existing `channeldb.ChannelType` type
into a _bit field_. This doesn't require us to change the current
serialization or interpretation or the type as it is, since all the
current defined values us a distinct bit. This PR lays the ground work
for any future changes that may introduce new channel types (like anchor
outputs), and also any changes that may modify the existing invariants
around channels (if we're the initiator, we always have the funding
transaction).
2019-10-31 16:34:37 -07:00
Conner Fromknecht
3455f7965d
htlcswitch/link: return InvalidOnionPayload failure
This commit modifies the link return an InvalidOnionPayload failure when
it cannot parse a TLV payload. The offset is left at zero, since its
unclear how useful it will be in practice and would require some
significant reworkings of the abstractions in the tlv package.

TODO: add unit tests. currently none of the test unit infrastructure is
setup to handle TLV payloads, so this would require implementing a
separate mock iterator for TLV payloads that also supports injecting
invalid payloads. Deferring this non-trival effor till a later date
2019-10-30 21:19:53 -07:00
Joost Jager
200be87212
htlcswitch: fix returned failure for insufficient balance
In the scenario where the requested channel does not have enough balance
and another channel towards the same node generates a different failure,
we erroneously returned UnknownNextPeer instead of the expected
TemporaryChannelFailure.

This commit rewrites the non-strict forwarding logic in the switch to
return the proper failure message. Part of this is moving the link
balance check inside the link.
2019-10-23 09:57:34 +02:00
Joost Jager
5404348f51
htlcswitch: rename policy check functions 2019-10-23 09:57:22 +02:00
Joost Jager
566680defb
htlcswitch: extract failure message creation 2019-10-23 09:57:20 +02:00
Joost Jager
aa359160de
htlcswitch: return consistent failure message for internal error 2019-10-23 09:57:18 +02:00
Conner Fromknecht
dbc0e88584
Merge pull request #3564 from joostjager/htlcswitch-logging
build+htlcswitch+lnwallet: add prefix logger
2019-10-16 13:00:36 +02:00
Wilmer Paulino
4e1658a02f
htlcswitch: raise max cltv limit to 2016 blocks
The previous limit of 1008 proved to be low, given that almost 50% of
the network still advertises CLTV deltas of 144 blocks, possibly
resulting in routes with many hops failing.
2019-10-11 18:07:40 -04:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Joost Jager
536dd47ce9
htlcswitch: log in lower case 2019-10-03 10:22:07 +02:00
Joost Jager
654b3cc718
htlcswitch: use prefix logger for remaining log statements in link 2019-10-03 10:22:05 +02:00
Joost Jager
03ed1b0aa3
htlcswitch: use prefix logger in link 2019-10-03 10:22:03 +02:00
Olaoluwa Osuntokun
4b65aea306
watchtower+htlcswitch: update client tower logic to recognize safu commitments
In this commit, we update the tower+link logic to tag a commitment as
the new (tweakless) format if it applies. In order to do this, the
BackupTask method has gained an additional parameter to indicate the
type of commitment that we're attempting to upload. This new tweakless
bool is then threaded through all the way to back up task creation to
ensure that we make the proper input.Input.

Finally, we've added a new test case for each existing test case to test
each case w/ and w/o the tweakless modifier.
2019-09-25 18:25:55 -07:00
Johan T. Halseth
2d194c9672
htlcswitch/link: remove chan sync delay
Earlier this delay was needed to increase the likelihood that the DLP
scanario was successfully completed. Since we would risk the connection
being torn down, and the link exit, we could end up with the remote
marking the channel borked, but not finishing the force close.

With the previous set of commits, we should now trigger the force close
before we merk the channel borked, which should ensure we'll resume the
orocess on next restart/connect.
2019-09-25 14:04:44 +02:00
Johan T. Halseth
2a6ad6e634
channeldb+lnwallet: don't pass isRestoredChan to ChanSyncMsg
Since we have access to the internal state of the channel, we can
instead get it directly instead of passing it in as a parameter.
2019-09-25 14:04:44 +02:00
Johan T. Halseth
9423fadf56
htlcswitch/link: don't mark channel borked on force close scanarios
Instead of marking the channel Borked in cases where we want to force
close it, we immediately let the peer fail the link. The channel state
will instead be updated by the channel arbitrator, which will transition
to StateBroadcastCommit, marking the channel borked, then marking the
commitment tx broadcasted right before publishing the force close tx. We
do this to avoid the case where we would mark it Borked, but go down
before being able to publish the closing tx.

Storing the force close tx ensures it will be re-published on startup.
2019-09-25 14:04:44 +02:00
Johan T. Halseth
6e361d04cf
lnwallet+link: move marking channel states to link
Instead of marking the database state when processing the channel
reestablishment message, we wait for the result of this processing to
arrive in the link, and mark it accordingly in the database here.

We do this move the logic determining whether we should force close the
channel or not, and what state to mark it in the DB, to the same place,
as these need to be consistent.
2019-09-25 14:04:43 +02:00
Johan T. Halseth
f40f4620f7
lnwallet/channel: make ErrCommitSyncLocalDataLoss type
This commit converts the ErrCommitSyncLocalDataLoss error into a struct,
that also holds the received last unrevoked commit point from the remote
party.
2019-09-25 14:04:43 +02:00
Johan T. Halseth
eb1b84c0b4
channeldb+lnwallet: make ChanSyncMsg method on OpenChannel 2019-09-25 14:04:42 +02:00
Johan T. Halseth
33fe09482b
lnwire+multi: define Error() for lnwire.Error
To make lnwire.Error actually satisfy the error interface, define the
Error method directly.
2019-09-20 10:55:21 +02:00
Conner Fromknecht
3276bf2960
htlcswitch/link: remove channel reestablish deadline
Now that the link will remain ineligible until it receives
channel_reestablish from the remote peer, we can remove the channel
reestablish timeout entirely.
2019-09-19 12:47:08 -07:00
Conner Fromknecht
9d6ee2ebd9
htlcswitch/link: restrict EligibleToForward to wait for reestablish
This commit modifies the link's EligibleToForward() method only return
true once the peers have successfully exchanged channel reestablish
messages. This is a preliminary step to increasing the reestablish
timeout, ensuring the switch won't try to forward over links while
we're waiting for the remote peer to resume the connection.
2019-09-19 12:46:56 -07:00
Conner Fromknecht
6dca07577d
multi: move active/inactive ntfns from switch to link
Since we will now wait to deliver the event after channel reestablish,
notifying when the link is added to the switch will no longer be
sufficient. Later, we will add receiving reestablish as an additional
requirement for EligibleToForward returning true.

The inactive ntfn is also moved, to ensure that we don't fire inactive
notifications if no corresponding active notification was sent.
2019-09-19 12:46:44 -07:00
Joost Jager
f60e4b1e14
lnwire+htlcswitch: report height for invalid payment details failure
Extends the invalid payment details failure with the new accept height
field. This allows sender to distinguish between a genuine invalid
details situation and a delay caused by intermediate nodes.
2019-09-16 10:10:20 +02:00
Joost Jager
4e140213f9
htlcswitch+invoices: circuit key based hodl notifications
This commit modifies hodl htlc notification from invoice registry from a
single notification per hash to distinct notifications per htlc. This
prepares for htlc-specific information (accept height) to be added to the
notification.
2019-09-16 10:10:14 +02:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Valentine Wallace
8ce7f82da0 discovery+switch: apply zero forwarding policy updates in-memory as well as on disk
In this commit, we fix a bug where if a user updates a forwarding policy to be
zero, the update will be applied to the policy correctly on-disk, but not
in-memory.

We solve this issue by having the gossiper return the list of on-disk updated
policies and passing these policies to the switch, so the switch can assume
that zero-valued fields are intentional and not just uninitialized.
2019-09-09 23:39:44 -07:00
Joost Jager
e54b24289f
htlcswitch: move hop iterator into htlcswitch/hop package
Prepares for onion blob decoding outside of htlcswitch.
2019-09-05 15:30:31 +02:00