Commit Graph

41 Commits

Author SHA1 Message Date
carla
75370ce6b4
multi: update WalletController PublishTransaction to include label
Add label parameter to PublishTransaction in WalletController
interface. A labels package is added to store generic labels that are
used for the different types of transactions that are published by lnd.

To keep commit size down, the two endpoints that require a label
parameter be passed down have a todo added, which will be removed in
subsequent commits.
2020-05-19 13:30:00 +02:00
carla
99a45e968a
sweep: add list sweeps function 2020-05-05 21:10:11 +02:00
Johan T. Halseth
c1d00a0c9b
Merge pull request #4101 from ErikEk/typo_fixes_trivial
trivial: typo fixes
2020-03-19 21:36:38 +01:00
ErikEk
4e47181b99 trivial: typo fix 2020-03-19 05:43:49 +01:00
Joost Jager
3b517390d8
cnct+sweeper: give contract court access to relay fee
Relay fee is needed later to sweep anchors at the minimum fee rate.
2020-03-17 16:25:37 +01:00
Joost Jager
29e1489179
sweep: leave exclusive group unchanged on parameter update
Exclusive group is a static property that doesn't need to be updated.
Requiring the exclusive group to be passed into UpdateParams creates a
burden for the caller to make sure they supply the existing group.

This change will be beneficial for users that bump anchor sweeps that
have exclusive groups set.
2020-03-17 14:19:39 +01:00
Joost Jager
1c93e9e03d
sweep: isolate min fee rate bucket 2020-03-17 14:19:37 +01:00
Joost Jager
9dc349488b
sweep: add exclusive groups
Allows certain sweep inputs to be kept in separate transactions at all
times. This is a preparation for anchor outputs. Before the commitment
tx confirms, there are three potential anchors that can be cpfp'ed. We
want to cpfp them all, but if done in the same transaction, the
transaction would guaranteed to be invalid. Exponential backoff would
eventually get the txes published, but having exclusive groups makes the
process faster.
2020-02-13 09:52:21 +01:00
Joost Jager
69a6107d06
sweep: log full parameter struct 2020-02-12 09:59:43 +01:00
Joost Jager
b0aae13d70
sweep: allow force sweeps 2020-01-15 16:56:44 +01:00
Joost Jager
16832cefa3
sweep: allow updating all sweep parameters
This is a preparation for adding additional parameters besides the fee
preference.
2020-01-15 16:56:40 +01:00
Joost Jager
280611ab6e
sweep+walletrpc+lncli: report requested fee preference for pending sweeps
Previously only the fee rate used for the last sweep (the sweep bucket
average) was reported. This commit adds the request fee preference to
the report, which is used to select a bucket and the sweep tx fee rate.
2020-01-09 14:56:08 +01:00
Joost Jager
e01600fdb8
sweep: add wallet inputs to reach dust limit
This commit allows sweeper to sweep inputs that on its own are not able
to form a sweep transaction that meets the dust limit.

This functionality is useful for sweeping small outputs. In the future,
this will be particularly important to sweep anchors. Anchors will
typically be spent with a relatively large fee to pay for the parent tx.
It will then be necessary to attach an additional wallet utxo.
2019-12-17 22:00:39 +01:00
Joost Jager
8353b6fd6e
sweep: extract sweepCluster method
Prepares for adding another level of nesting.
2019-12-17 22:00:37 +01:00
Joost Jager
34c9193bfc
sweep: create wallet interface
We need access to additional wallet functionality. This commit creates
an interface to prevent passing in multiple function pointers.
2019-12-17 22:00:35 +01:00
Joost Jager
b325aae4f2
sweep: extract positive input set struct
A refactoring that introduces no functional changes. This prepares for
the addition of wallet utxos to push the sweep tx above the dust limit.

It also enabled access to input-specific sweep parameters during tx
generation. This will be used in later commits to control the sweep
process.
2019-12-17 22:00:34 +01:00
Joost Jager
071c57d4a4
sweep: embed input.Input interface
Get rid of needless referencing of the embedded object.
2019-12-13 12:02:44 +01:00
Joost Jager
38adfd7ecc
sweep: create sweep parameters struct
Prepares for adding more input-specific sweep parameters.
2019-12-13 12:02:42 +01:00
Joost Jager
e2bf6b49e9
sweep: fix bucket clustering
Fixes a bug where bucket sizes were not the configured size, but the
configured size plus the min relay fee.
2019-12-13 11:08:09 +01:00
Joost Jager
50078216ca
sweep: use bucket ids
Using a fee rate just as an identifier can be confusing.
2019-12-13 11:08:07 +01:00
Olaoluwa Osuntokun
777ed104a3
chainfee: create new chainfee package extracting fees from lnwallet
In this commit, we create a new chainfee package, that houses all fee
related functionality used within the codebase. The creation of this new
package furthers our long-term goal of extracting functionality from the
bloated `lnwallet` package into new distinct packages. Additionally,
this new packages resolves a class of import cycle that could arise if a
new package that was imported by something in `lnwallet` wanted to use
the existing fee related functions in the prior `lnwallet` package.
2019-10-31 16:41:57 -07:00
Oliver Gugger
8e4a897a60
sweep: use chain notifier instead of chain IO for best block
Because the BestBlock method of ChainIO is not exposed through any
RPC we want to get rid of it so we can use the sweeper outside of
lnd too. Since the chain notifier now also delivers the current best
block we don't need the BestBlock method any more.
2019-10-14 15:32:54 +02:00
Wilmer Paulino
e69d93949c
sweep: allow fee bumps of inputs/transactions within UtxoSweeper
In this commit, we introduce the ability to bump the fee of an input
within the UtxoSweeper. Once its fee rate is bumped, a replacement
transaction (RBF) will be broadcast with the newer fee rate (assuming
the newer fee rate is high enough to be valid), replacing any
conflicting lower fee rate transactions.

Note that this currently doesn't validate the fee preference of the
bump. This responsibility is delegated to the caller, so care must be
taken to ensure the new fee preference is sufficient.
2019-06-11 15:06:38 -07:00
Wilmer Paulino
c70858dc46
sweep: prevent default fee preference fallback
We want to make sure clients are aware of their own fee preferences,
rather than relying on defaults.
2019-06-11 15:06:35 -07:00
Wilmer Paulino
d75fac26bc
sweep: expose pending input sweeps within the UtxoSweeper 2019-06-05 12:10:32 -07:00
Wilmer Paulino
50a8f188a3
sweep: add lastFeeRate field to PendingInput
This will serve useful when exposing the pending inputs over RPC, since
we currently don't keep track of the last fee rate used for an input.
2019-06-05 12:10:31 -07:00
Wilmer Paulino
682aebdd53
sweep: broadcast sweep transactions in descending fee rate order
In this commit, we address another issue that arose with the
introduction of the fee rate buckets. We'll use an example to explain
the problem space:

Let's say we have inputs A, B, and C within the same fee rate bucket. If
A's fee rate is bumped to a higher bucket, then it's currently possible
for the lower fee rate bucket to be swept first, which would produce an
invalid RBF transaction since we're removing an input from the original
without providing a higher fee. By the time we get to the higher fee
rate bucket, we broadcast a valid RBF transaction _only_ sweeping input
A, which would evict the transaction sweeping inputs B and C from the
mempool.

To prevent this eviction, we can simply broadcast the higher fee rate
sweep transactions first, to ensure we have valid RBF transactions.
2019-05-24 15:30:39 -07:00
Wilmer Paulino
5172a5e255
multi: support arbitrary client fee preferences to UtxoSweeper
In this commit, we introduce support for arbitrary client fee
preferences when accepting input sweep requests. This is possible with
the addition of fee rate buckets. Fee rate buckets are buckets that
contain inputs with similar fee rates within a specific range, e.g.,
1-10 sat/vbyte, 11-20 sat/vbyte, etc. Having these buckets allows us to
batch and sweep inputs from different clients with similar fee rates
within a single transaction, allowing us to save on chain fees.

With this addition, we can now get rid of the UtxoSweeper's default fee
preference. As of this commit, any clients using the it to sweep inputs
specify the same fee preference to not change their behavior. Each of
these can be fine-tuned later on given their use cases.
2019-05-24 15:30:38 -07:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
Olaoluwa Osuntokun
73c9c2ee15
sweep+cnct+nursery+rpc: extract DetermineFeePerKw to func, add FeePreference
In this commit, we extract the existing determineFeePerKw method on the
RPC server into a new file in the sweep package. Along the way, we
consolidate code by introducing a new FeePreference struct, which allows
the caller to express their fee preference either in blocks to
confirmation, or a direct fee rate. This move takes a small step to
father decoupling calls in the main RPC server.
2019-01-09 15:55:17 -08:00
Olaoluwa Osuntokun
77262ff699 sweep: rename Estimator to FeeEstimator 2019-01-09 15:55:01 -08:00
Joost Jager
01e64afd56
sweep: add time-based sweeper
In this commit, the sweep package is extended from just tx generation to
an active sweeper that collects sweep inputs and autonomously proceeds
to publish the sweep tx after the batch window time interval has passed
without new inputs being added.
2018-12-18 10:50:17 +01:00
Joost Jager
067817f6d2
sweep: move tx generation to separate file 2018-12-18 10:50:13 +01:00
Joost Jager
26cfc505ee
sweep: refactor weight estimation 2018-12-18 10:50:10 +01:00
Olaoluwa Osuntokun
fc21bf091a
multi: modify sweeper.CreateSweepTx to accept conf target, style changes
In this commit, we modify the newly introduced UtxoSweeper.CreateSweepTx
to accept the confirmation target as a param of the method rather than a
struct level variable. We do this as this allows each caller to decide
at sweep time, what the fee rate should be, rather than using a global
value that is meant to work in all scenarios. For example, anytime
we're sweeping an output with a CLTV lock that's has a dependant
transaction we need to sweep/cancel, we may require a higher fee rate
than a regular force close with a CSV output.
2018-10-18 18:08:27 -07:00
Conner Fromknecht
cae4f43c19
sweep/sweeper: ignore unknown witness types
This commit restores the sweep behavior of
filtering inputs with unknown witness types
from the final sweep transaction. Currently,
such inputs will be included without adding
anything to the weight estimate, possibly
creating a transaction with insufficient fees.
2018-10-17 16:21:06 -07:00
Joost Jager
95bf858ac3
sweep: refactor functions and unify tx info logging 2018-10-17 12:44:34 +02:00
Joost Jager
6977d59e35
cnct: reuse sweep tx logic for success resolver 2018-10-17 12:44:34 +02:00
Joost Jager
c1d845aa0d
cnct: reuse sweep tx logic for commit resolver
Removes duplicate sweep tx code from commit resolver
and delegates generation to UtxoSweeper in the sweep
package.
2018-10-17 12:44:34 +02:00
Joost Jager
7d69df77ed
sweep: create new Input interface
This commit introduces a common interface for sweep
inputs. It eliminates the type checking from UtxoSweeper.

Also the formerly present Amount() getter is removed. It was redundant
because this value is present in SignDesc().Output.Value as well.
2018-10-17 12:44:33 +02:00
Joost Jager
4dab405623
sweep: move sweep tx generation into sweep package
Sweep txes are currently generated in multiple locations. Moving
the sweep tx generation into a shared package will allow us to
reuse that logic.
2018-10-17 12:44:33 +02:00