In this commit, we address a bug where it's possible that we still
attempt to manually scan for a transaction to determine whether it's
been included in the chain even after successfully checking the txindex
and not finding it there. Now, we'll short-circuit this process by
exiting early if the txindex lookup was successful but the transaction
in question was not found. Otherwise, we'll fall back to the manual
scan.
In this commit, we extract some of the helper test variables and
functions into their own file and guard them under a build flag. This is
needed as some unit tests will be introduced in a future commit where
most of the same functions within the interface tests are reused. In
order to prevent these variables and functions from being exportable, we
guard them by the "debug" build tag.
rescanning
In this commit, we modify the rescan options Neutrino uses when
performing a rescan for historical chain events to disable disconnected
block notifications. This is needed as the Neutrino backend will mutate
its internal state while rewinding, which causes disconnected block
notifications to be sent. Since the notifier acts upon these
notifications, they would cause it to also rewind unnecessarily.
In this commit, we extend the different ChainNotifier implementations to
cache height hints for our spend events. Each outpoint we've requested a
spend notification for will have its initial height hint cached. We then
increment this height hint at every new block for unspent outpoints.
This allows us to retrieve the *exact* height at which the outpoint has
been spent. By doing this, we optimize the different ChainNotifier
implementations since they will no longer have to rescan forward (and
possibly fetch blocks in the neutrino/pruned node case) from the initial
height hint.
In this commit, we alter the different chain notifiers to query their
height hint cache before registering a confimation notification. We do
this as it's possible that the cache has a higher height hint, which
can potentially reduce the amount of blocked fetched when attempting
historical dispatches.
In this commit, we extend our TxConfNotifier to cache height hints for
our confirmation events. Each transaction we've requested a confirmation
notification for will have its initial height hint cached. We increment
this height hint at every new block for unconfirmed transactions. This
allows us to retrieve the *exact* height at which the transaction has
been included in a block. By doing this, we optimize the different
ChainNotifier implementations since they will no longer have to scan
forward (and possibly fetch blocks in the neutrino/pruned node case)
from the initial height hint looking for the confirmation.
In this commit, we introduce two new interfaces: SpendHintCache and
ConfirmHintCache for a height hint cache. The SpendHintCache is
responsible for maintaining the earliest height at which an outpoint
could have been spent within the chain, while the ConfirmHintCache is
responsible for maintaining the earliest height at which a transaction
confirms within the chain. We also add an implementation of these
interfaces with a single struct HeightHintCache, backed by a channeldb
instance, which will cary the duties of the interfaces above.
Tests for the case where a chain backend skips a series of blocks, such that the notifier's best block is out of date. Also tests the case where a notifier's best block has been reorged out of the chain.
This tests the case where a client registers for block notifications with an outdated best block, to ensure that the client is properly caught up on the blocks that it has missed.
Switches all ChainNotifier parameters to be TestChainNotifiers. This allows access to the extra testing methods provided by the TestChainNotifier interface.
TestChainNotifier wraps the ChainNotifier interface to allow adding additional testing methods with access to private fields in the notifiers. These testing methods are only compiled when the build tag "debug" is set. UnsafeStart allows starting a notifier with a specified best block.
UnsafeStart is useful for the purpose of testing cases where a notifier's best block is out of date when it receives a new block.
This resolves the situation where a notifier's chain backend skips a series of blocks, causing the notifier to need to dispatch historical block notifications to clients.
Additionally, if the current notifier's best block has been reorged out, this logic enables the notifier to rewind to the common ancestor between the current chain and the outdated best block and dispatches notifications from the ancestor.
This prevents the situation where we notify clients about a newly connected block, and then the block connection itself fails. We also want to set our best block in between connecting the block and notifying clients, in case a client makes queries about the new block they have received.
If the chain backend misses telling the notifier about a series of disconnected blocks, the notifier is now able to disconnect the tip to its new best block.
If a client passes in their best known block when registering for block notifications, check to see if it's behind our best block. If so, dispatch the missed block notifications to the client.
This is necessary because clients that persist their best known block can miss new blocks while registering for notifications.
Clients can optionally pass their best block known into RegisterBlockEpochNtfn. This enables the notifiers to catch up clients on blocks they may have missed.
In this commit, we introduce a nice optimization with regards to lnd's
interaction with a bitcoind backend. Within lnd, we currently have three
different subsystems responsible for watching the chain: chainntnfs,
lnwallet, and routing/chainview. Each of these subsystems has an active
RPC and ZMQ connection to the underlying bitcoind node. This would incur
a toll on the underlying bitcoind node and would cause us to miss ZMQ
events, which are crucial to lnd. We remedy this issue by sharing the
same connection to a bitcoind node between the different clients within
lnd.
In this commit, we update the neutrino backend for the ChainNotifier to
use the new API which requires that callers pass the outpoint along with
the pkScript to be notified of any spends.
In this commit, we update the RegisterSpendNtfn method to also take the
prev output script of the item that we're attempting to watch for. This
change is required due to the recent modifications in the neutrino
protocol (BIP 158 + 157). With the new protocol, we'll match on the
script, but then dispatch notifications based on the precise outpoint
that matches.
In this commit, we update the implementation of conf notifications for
neutrino to use the output script rather than the txid when matching
blocks for relevant items. The change itself is rather minor as we just
pass in the script, yet match based on the txid as normal when we go to
dispatch notifications.
In this commit, we prep for an upcoming final change to BIP 158. The
change results in the txid no longer being included in the regular
filter. As a result, neutrino will now need to match based on the output
script of the transaction that we wish to receive confirmation
notifications for.
In this commit, we modify our TxConfNotifier struct to allow handling
notification registrations asynchronously. The Register method has been
refactored into two: Register and UpdateConfDetails. In the case that a
transaction we registered for notifications on has already confirmed,
we'll need to determine its confirmation details on our own. Once done,
this can be provided within UpdateConfDetails.
This change will pave down the road for our different chain notifiers to
handle potentially long rescans asynchronously to prevent blocking the
caller.
In this commit, we modify the way to handle historical spend dispatches
to ensure that we don't block the client for very old rescans. Rather
than blocking and waiting for the rescan to finish (which may take
minutes in the worst case), we'll now instead launch a goroutine to
handle the async response of the rescan.
This commit increases the time we wait for a spend client to notify a
mempool spend from 50ms to 10s. This is done to catch the case where
bitcoind would use up to 7 seconds before notifying about a mempool
spend, which wasn't caught by the test.
This commit fix a bug within the bitcoind notifier logic, which would
ignore the passed mempool argument, and notify spentness whether the
spending transaction was confirmed or not. The logic used to fix this is
similar to what is already done for the btcd backend.
In this commit, we fix a recently introduced bug which can result in a
panic when bitcoind nodes without a txindex active are started. The
issue was that we would still defence the transaction's blockhash, which
would be nil if we detected that the backend didn't have the txindex
active.
Before this commit, we relied on the need of full nodes to enable the
transaction index. This allowed us to fetch historical details about
transactions in order to register and dispatch confirmation and spend
notifications.
This commit allows us to drop that requirement by providing a fallback
method to use when the transaction index is not enabled. This fallback
method relies on manually scanning blocks for the transactions
requested, starting from the earliest height the transactions could have
been included in, to the current height in the chain.
This commit extends the test to exercise a scanario that wasn't properly
covered, by registering for a confirmed spend notification for a
historical spend. We also extend the test to make sure it handles buried
spends properly.
This commit fixes a recently introduced bug in the btcdnotifier, where
we would skip all spend clients waiting for a confirmed spend in
txUpdates. The regular case where a spend is included in a new block was
correctly handled in onBlockConnected, but the txUpdates queue is also
used for confirmed spends during rescans, which we would miss. This
commit fixes that by checking if the tx update is confirmed or
unconfirmed, and acts accordingly.
In this commit, we introduce the ability for the different ChainNotifier
implements to send incremental updates to the subscribers of transaction
confirmations. These incremental updates represent how many
confirmations are left for the transaction to be confirmed. They are
sent to the subscriber at every new height of the chain.
In this commit, we avoid storing extra copies of a transaction when
multiple clients register to be notified for the same transaction. We do
this by using a set, which only stores unique elements.
In this commit, we add a new Updates channel to our ConfirmationEvent
struct. This channel will be used to deliver updates to a subscriber of
a confirmation notification. Updates will be delivered at every
incremental height of the chain with the number of confirmations
remaining for the transaction to be considered confirmed by the
subscriber.
This commit changes the chainntnfs tests to adhere to the new
RegisterSpendNtfn signature. It also makes sure that for the test
testSpendNotification, we are only getting notified when a spend is
mined, as previously btcd would notify on mempool inclusion, while
neutrino and bitcoind would notify only on confirmation, and the test
wouldn't catch this.
This commit adds a boolean to RegisterSpendNtfn, giving the caller the
option to only register for notifications on confirmed spends. This is
implemented for the btcd backend using logic similar to what is in used
for Neutrino, paving the way for later unifying them.
This commit moves the call to the bitcoind backend to start watching an
outpoint for spentness to after we have recorded the outpoint in our
list of clients. This is done to avoid a race that we saw using the btcd
backend, and it is probable that it can also happen using bitcoind.
This commit moves the call to the btcd backend to start watching an
outpoint for spentness to after we have recorded the outpoint in our
list of clients. This is done to avoid a race that could occur if btcd
quicly sent a spend notification before we had been able to record it in
our map, essentially losing it.
In this commit, we fix a lingering bug related to the way that we
deliver block epoch notifications to end users. Before this commit, we
would launch a new goroutine for *each block*. This was done in order
to ensure that the notification dispatch wouldn’t block the main
goroutine that was dispatching the notifications. This method archived
the goal, but had a nasty side effect that the goroutines could be
re-ordered during scheduling, meaning that in the case of fast
successive blocks, then notifications would be delivered out of order.
Receiving out of order notifications is either disallowed, or can cause
sub-systems that rely on these notifications to get into weird states.
In order to fix this issue, we’ll no longer launch a new goroutine to
deliver each notification to an awaiting client. Instead, each client
will now gain a concurrent in-order queue for notification delivery.
Due to the internal design of chainntnfs.ConcurrentQueue, the caller
should never block, yet the receivers will receive notifications in
order. This change solves the re-ordering issue and also minimizes the
number of goroutines that we’ll create in order to deliver block epoch
notifications.
In this commit, we fix an issue that was recently introduced to the way
we handle historical dispatches for the neutrino notifier. In a recent
change, we no return an error if we’re unable to actually find the
transaction that spends an outpoint. If this is the case, then the
outpoint is actually unspent, and we should proceed as normal.
In this commit, we fix a race condition related to the way we attempt
to query to see if an outpoint has already been spent by the time it’s
registered within the ChainNotifier. If the transaction creating the
outpoint hasn’t made it into the mempool by the time we execute the
GetTxOut call, then we’ll attempt to query for the transaction itself.
In this case, if we query for the transaction, then the block hash
field will be empty as it hasn’t yet made it into a block. Under the
previous logic, we’d then attempt to force a rescan. This is an issue
as the forced rescan will fail since it’ll try to fetch the block hash
of all zeroes.
In this commit, we fix this issue by only entering this “fallback to
rescan” logic iff, the transaction has actually been mined.
All implementations of the ChainNotifier interface support registering
notifications on transaction confirmations. This struct is intended to
be used internally by ChainNotifier implementations to handle much of
this logic.
