Commit Graph

45 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
6983a9e146
contractcourt: fix off-by-one error in closeObserver case
In this commit, we fix an off-by-one error when handling force closes
from the remote party. Before this commit, if the remote party
broadcasts state 2, and we were on state 1, then we wouldn't act at all.
This is due to an extraneous +1 in the comparison, causing us to only
detect this DLP case if the remote party's state is two beyond what we
know atm. Before this commit, the test added in the prior commit failed.
2019-03-13 17:31:23 -07:00
Olaoluwa Osuntokun
48532dc9f6
contractcourt: abstract call to GetStateNumHint within the closeObserver
In this commit, we abstract the call to `GetStateNumHint` within the
`closeObserver` method to a function closure in the primary config. This
allows us to feed in an arbitrary broadcast state number within unit
tests.
2019-03-13 17:31:20 -07:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
Olaoluwa Osuntokun
400a1d3282
Merge pull request #2431 from cfromknecht/keyring-remote-delay-retribution
lnwallet: Add keyring and remote CSV delay to BreachRetribution
2019-01-11 15:33:16 -08:00
Conner Fromknecht
eb2f5cecf6
multi: remove breach tx arg from NewBreachRetribution args
This commit removes the breach transaction from the
arguments passed to NewBreachRetribution. We already
keep all prior remote commitments on disk in the
commitment log, and load that transaction from disk
inside the method. In practice, the one loaded from
disk will be the same one that is passed in by the
caller, so there should be no change in behavior
as we've already derived the appropriate state number.

This changes makes integration with the watchtower
client simpler, since we no longer need to acquire
the breaching commitment transaction to be able to
construct the BreachRetribution. This simplifies
not only the logic surrounding transient backsups,
but also on startup (and later, retroactively
backing up historic updates).
2019-01-10 13:13:38 -08:00
Conner Fromknecht
088fb33718
contractcourt: nil keyring curves on breach info 2019-01-07 17:15:45 -08:00
Johan T. Halseth
9e81b1fe53
chain_watcher: poll for commit point in case of failure
We pool the database for the channel commit point with an exponential
backoff. This is meant to handle the case where we are in process of
handling a channel sync, and the case where we detect a channel close
and must wait for the peer to come online to start channel sync before
we can proceed.
2018-11-21 10:28:57 +01:00
Johan T. Halseth
a9f93b2988
contractcourt/chain_watcher: add channel sync message to CloseChannelSummary 2018-11-21 10:28:56 +01:00
Johan T. Halseth
75df58c68b
contractcourt: move responsibility for closing force closes to chanArb
This commit moves the responsibility for closing local and remote force
closes in the database from the chain watcher to the channel arbitrator.

We do this because we previously would close the channel in the
database, before sending the event to the channel arbitrator. This could
lead to a situation where the channel was marked closed, but the channel
arbitrator didn't receive the event before shutdown. As we don't listen
for chain events for channels that are closed, those channels would be
stuck in the pending close state forever, as the channel arbitrator
state machine wouldn't progress.

We fix this by letting the ChannelArbitrator close the channel in the
database. After the contract resolutions are logged (in the state
callback before transitioning to StateContractClosed) we mark the
channel closed in the database. This way we make sure that it is marked
closed only if the resolutions have been successfully persisted.
2018-08-23 00:03:21 +02:00
Johan T. Halseth
ad1d78884a
contractcourt: move responsibility for closing coop close channel to chanArb 2018-08-23 00:03:21 +02:00
Olaoluwa Osuntokun
e97e4c1f5d
contractcourt: set auxiliary chan recovery info for all created chan close summaries 2018-08-14 19:11:40 -07:00
Olaoluwa Osuntokun
08e11d197d
contractcourt: update chain watcher to make funding pkScript for spend ntfn 2018-07-31 21:29:00 -07:00
Johan T. Halseth
00154bda24
contractcourt/chain_watcher: attempt dispatchRemoteClose using data loss commitPoint
This commit makes the chainwatcher attempt to dispatch a remote close
when it detects a remote state with a state number higher than our
known remote state. This can mean that we lost some state, and we check
the database for (hopefully) a data loss commit point retrieved during
channel sync with the remote peer. If this commit point is found in the
database we use it to try to recover our funds from the commitment.
2018-07-31 15:16:24 +02:00
Johan T. Halseth
2626bba105
contractcourt/chain_watcher: use commitPoint directly instead of isPendingCommit 2018-07-31 08:27:03 +02:00
Johan T. Halseth
57e829f47e
multi: remove mempool bool from RegisterSpendNtfn 2018-07-22 23:09:08 +02:00
Wilmer Paulino
d26050f711
contractcourt: use MarkChannelResolved for coop channel closures
In this commit, we alter cooperative channel closures to also use
MarkChannelResolved in order to unify the logic for the different types
of channel closures.
2018-07-17 17:35:28 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
maurycy
3be08e69cf multi: 64bit aligment of atomic vars on arm/x86-32 2018-06-04 20:02:34 -07:00
Johan T. Halseth
0f077fcb54
contractcourt/chain_watcher: mark fully closed in dispatchCoopClose
This commit makes the dispatchCooperativeClose method mark the channel
fully closed directly, without registering for confirmation
notifications first. We can do this as recent changes to the
contractcourt changed the definition of a closed channel in the database
to have had its closing tx confirmed, and we only dispatch the
cooperative close once the transaction has 1 confirmation.

We also rename the markChanClosed method to notifyChanClosed, to more
clearly indicate that the ChainArbitrator no longer has to mark the
channel fully closed in the database.
2018-05-22 14:26:02 +02:00
Johan T. Halseth
af14a2fc57
contractcourt/chain_watcher: remove CooperativeCloseCtx
Removes CooperativeCloseCtx and methods.
2018-05-22 14:21:43 +02:00
Conner Fromknecht
f963f91a3c
multi: use mutex-guarded ShortChanID() on OpenChannel 2018-05-09 16:06:49 -07:00
Olaoluwa Osuntokun
c8b15719f2
contractcourt: ensure the chainWatcher is able to play all remote commitments 2018-05-03 21:29:29 -07:00
Johan T. Halseth
3fdc04dff0
contractcourt/chain_watcher: make breachArbiter handoff a function closure
This commit changes how the ChainWatcher notifies the breachArbiter
about a channel breach. Instead of assuming the breachArbiter is among
the clients subscibing to channel events, it will call a new method
contractBreach(), and assume the breachArbiter has reliably gotten the
breach info when this method returns with a non-nil error.

Since the breachArbiter was the only sybsystem having a sync chain
subsciption, we also remove the (now) unused syncDispatch option.
2018-05-02 08:43:31 +02:00
Johan T. Halseth
0697510884
contractcourt/chain_watcher: create chainWatcherConfig 2018-05-02 08:43:31 +02:00
Johan T. Halseth
79341fc63e
contractcourt/chain_watcher: move log message
This move the log message "channel marked pending-closed" to the point
where the channel actually has been marked pending closed, instead of
before the database transaction has been done.
2018-05-02 08:43:30 +02:00
Johan T. Halseth
7e397067f6
contractcourt/chainwatcher: remove close observer for loop
This commit removes the for loop in the closeObserver, as it wasn't
serving any purpose. After receiving a spend notification we would
return, breaking out of the loop. When getting a quit signal we would
also return, making the loop only do one iteration in any case.
2018-05-02 08:43:30 +02:00
Johan T. Halseth
4320421110
contractcourt/chain_watcher: don't delete syncDispatch clients on Cancel()
This commit makes clients subscribing to channel events that are marked
"sync dispatch" _not_ being deleted from the list of clients when they
call Cancel(). Instead a go routine will be launched that will send an
error on every read of the ProcessACK channel.

This fixes a race in handing off the breach info while lnd was shutting
down. The breach arbiter could end up being shut down (and calling
Cancel()) before while the ChainWatcher was in the process of
dispatching a breach. Since the breach arbiter no longer was among the
registered clients at this point, the ChainWatcher would assume the
breach was handed off successfully, and mark the channel as pending
closed. When lnd now was restarted, the breach arbiter would not know
about the breach, and the ChainWatcher wouldn't attempt to re-dispatch,
as it was already marked as pending closed.
2018-04-25 09:37:26 +02:00
Johan T. Halseth
854e73b8e0
contractcourt/chain_watcher: register for confirmed spend, mark closed when detected
This commit changes the ChainWatcher to only send a chain event in case
the various spends are _confirmed_ on-chain, not only seen on the
network.

A consequence of this is that we now give the ChainWatcher the
responsibility of marking the channel closed when the closing tx is
confirmed, instead of the ChannelArbitrator.
2018-04-25 09:37:24 +02:00
Johan T. Halseth
49f4a70e5a
contractcourt/chain_watcher: add dispatchLocalForceClose
This commit adds a new method dispatchLocalClose, which will be called
in case our commitment is detected to spend the funding transaction. In
this case LocalUnilateralCloseInfo will be sent on the
LocalUnilateralClosure channel to all subscribers.

The UnilateralClosure channel is renamed to RemoteUnilateralClosure for
consistency.
2018-04-25 09:37:22 +02:00
practicalswift
663c396235 multi: fix a-vs-an typos 2018-04-17 19:02:04 -07:00
Olaoluwa Osuntokun
09291d6aeb
contractcourt: ensure the closeObserver exits on quit 2018-04-16 17:28:48 -07:00
Olaoluwa Osuntokun
aaa8fa33b1
contractcourt: when creating resolveContract closure don't bind to loop variable
In this commit, we fix a long standing bug where at times a co-op
channel closure wouldn't be properly marked as fully closed in the
database. The culprit was a re-occurring code flaw we've seen many times
in the codebase: a closure variable that closes over a loop iterator
variable. Before this instance, I assumed that this could only pop up
when goroutines bind to the loop iterator within a  closure. However,
this instance is the exact same issue, but within a regular closure that
has _delayed_ execution. As the closure doesn't execute until long after
the loop has finished executing, it may still be holding onto the _last_
item the loop iterator variable was assigned to.

The fix for this issue is very simple: re-assign the channel point
before creating the closure. Without this fix, we would go to call
db.MarkChanFullyClosed on a channel that may not have yet actually be in
the pending close state, causing all executions to fail.

Fixes #1054.
Fixes #1056.
Fixes #1075.
2018-04-12 18:54:33 -07:00
Olaoluwa Osuntokun
7a13378671
channeldb+contractcourt: add additional logging around co-op channel closes 2018-04-12 17:13:37 -07:00
Conner Fromknecht
218293db4a
contractcourt/chain_watcher: release mutex on return 2018-04-11 14:50:05 -07:00
Olaoluwa Osuntokun
bc029b9cd4
contractcourt: properly log error if unable to update chan close state 2018-04-10 16:55:32 -07:00
Johan T. Halseth
8b02064c7b
multi: provide mempool=true to RegisterSpendNtfn 2018-04-03 11:24:07 +02:00
Johan T. Halseth
5bf5a823ff
contractcourt/chain_watcher: don't print curve of DoubleTweak 2018-03-29 11:11:54 +02:00
Olaoluwa Osuntokun
4b20e805fe
multi: update packages due to recent SignDescriptor and WalletController changes 2018-03-06 16:04:03 -05:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Olaoluwa Osuntokun
73641d222f
contractcourt: properly use the broadcast state number during breach remedy 2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
5df6704a9c
contractcourt: make synchronous chain watcher notifications optional
In this commit, we modify the way that notifications are dispatched
within the chainWatcher. Before we would *always* wait for an ack back
before we started to clean up he database state. This would at times
lead to deadlocks. To remedy this, we now allow callers to decide if
they want notifications to be sync or not. The only current caller that
requires this is the breach arbiter.
2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
783f01e1c7
multi: fix linter warnings 2018-01-22 19:19:56 -08:00
Olaoluwa Osuntokun
3ec83cc82f
peer+contractcourt: delegate watching for co-op closes to the chainWatcher
In this commit, we modify the interaction between the chanCloser
sub-system and the chain notifier all together. This fixes a series of
bugs as before this commit, we wouldn’t be able to detect if the remote
party actually broadcasted *any* of the transactions that we signed off
upon. This would be rejected to the user by having a “zombie” channel
close that would never actually be resolved.

Rather than the chanCloser watching for on-chain closes, we’ll now open
up a co-op close context to the chainWatcher (via a layer of
indirection via the ChainArbitrator), and report to it all possible
closes that we’ve signed. The chainWatcher will then be able to launch
a goroutine to properly update the database state once any of the
possible closure transactions confirms.
2018-01-22 19:19:53 -08:00
Olaoluwa Osuntokun
62f951a969
contractcourt: extend the chainWatcher to be able to detect co-op closes
In this commit, we extend the chainWatcher to be able to automatically
detect co-op closes of the channel. With this change, it’s now fully
encompassed so able to detect all types of closes on-chain. We detect a
co-op close due to the sequence number being finalized, as well as
paying to us directly in a regular p2wkh-like output.
2018-01-22 19:19:52 -08:00
Olaoluwa Osuntokun
0e14ac2063
contractcourt: add new chainWatcher struct
In this commit, we add a new struct to the package, the chainWatcher.
The duty of this struct is to replace the functionality that was
previously implemented by the closeObserver of each channel. Rather
than the source of notification being tied to the lifetime of a
particular object, it’s now delegated to a persistent object that will
be around for the entire lifetime of the channel (until it’s closed).
This will serve to greatly simplify the code, and eliminate a large
class of bugs.
2018-01-22 19:19:48 -08:00