Commit Graph

73 Commits

Author SHA1 Message Date
Valentine Wallace
0fd6004958
multi: partition lnwire.ChanUpdateFlag into ChannelFlags and MessageFlags
In this commit:

* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's

* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.

* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2019-01-22 08:42:26 +01:00
Joost Jager
b2cb760c65
routing: check for empty hops list
This commit fixes a crash that could be triggered by sending an empty
hop list to the SendToRoute rpc.
2018-12-10 11:27:07 +01:00
Joost Jager
3ed16837e4
routing: prune channels unidirectional
In this commit we introduce pruning of channel edges instead of channels.
Channel failures apply to a single direction and it is unnecessarily
restricting to prune both directions.
2018-12-05 14:39:23 +01:00
Joost Jager
8b8e82a171
routing: remove route hop maps
Hop maps were used in a test to verify the population of the hop map
itself and further only in a single function (getFailedChannelID).
Rewrote that function and removed the hop maps completely.
2018-12-05 14:39:23 +01:00
Joost Jager
42debc6c12
routing: fix node ordering in test graph
There is the general assumption that channel edge policy nodes are
ordered such that the node1 pubkey is smaller than the key of node 2. In
the test graph, this assumption didn't hold. This commit fixes the test
graph and also adds a check to prevent this from happening again.
2018-12-05 09:15:27 +01:00
Johan T. Halseth
5f8425cb03
routing/pathfind_test: check error before attempting cleanup 2018-12-04 12:20:45 +01:00
Johan T. Halseth
67b018476c
routing/pathfind test: add TestPathSourceEdgesBandwidth
This commit adds a new test that checks that the bandwidth hints are
considered correclty for local channels, and that disable flags are
ignored in this case.
2018-12-04 12:20:45 +01:00
Johan T. Halseth
0b6a19866b
routing/pathfind: pass ignore disable flags for local channels
To decouple our own path finding from the graph state, we don't consider
the disable bit when attempting to use local channels. Instead the
bandwidth hints will be zero for local inactive channels.

We alos modify the unit test to check that the disable flag is ignored
for local edges.
2018-12-04 12:20:45 +01:00
Johan T. Halseth
20b9d5d000
routing: define graphParams and restrictParams
To avoid the findPath parameter list getting out of hand, we define new
structs that wraps the mandatory and optional parameters to findPath.
2018-12-04 12:20:44 +01:00
Joost Jager
a779004a18
lnrpc+routing: fix issues with missing data in unmarshallRoute
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.

In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
2018-10-13 22:59:23 +02:00
Olaoluwa Osuntokun
d8e6085c17
multi: update to go 1.11 gofmt 2018-10-07 14:37:38 +09:00
Joost Jager
47d2e1e024
routing: add option to specify explicit id for test channels 2018-09-11 20:10:15 +02:00
Joost Jager
c5c580ab54
routing: add private key map to test graph instance 2018-09-11 20:10:14 +02:00
Joost Jager
5daf75b264
routing: restructure test context creation 2018-09-11 20:10:14 +02:00
Joost Jager
2d255e3bc3
routing: use fixed time value in tests 2018-09-11 20:10:14 +02:00
Joost Jager
29b6bae4ed routing: convert fee limit test to table-driven 2018-08-09 20:23:40 -07:00
Joost Jager
3e7473f4f0 routing: backward searching 2018-08-09 20:23:40 -07:00
Joost Jager
e52d829168 routing: path finding test refactored 2018-08-09 20:23:40 -07:00
Conner Fromknecht
9eff876f52
routing/pathfind_test: fmt whitespace 2018-08-02 18:20:49 -07:00
Conner Fromknecht
1ded697e8d
multi: sort import paths with gofmt 2018-08-02 18:20:49 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Olaoluwa Osuntokun
c045defd0f
Merge pull request #1358 from joostjager/newfee
routing: routing may come up with suboptimal routes (weight function)
2018-06-28 19:18:13 -07:00
Joost Jager
b52796749f routing: new weight function
In this commit, a new weight function is introduced. This will create a
meaningful effect of time lock on route selection. Also, removes the
squaring of the fee term. This led to suboptimal routes.

Unit test added that covers the weight function and asserts that the
lowest fee route is indeed returned.
2018-06-28 14:52:39 +02:00
Joost Jager
416f368979 routing: add time lock asserts to NewRoute test
This comment extends the unit tests for NewRoute with checks
on the total time lock for a route as well as the expected time
lock values for every hop along the route.
2018-06-28 14:04:02 +02:00
Joost Jager
d4471878df routing: fix route fee calculation and channel capacity check
This commit fixes the logic inside the newRoute function to
address the following problems:

- Fee calculation for a hop does not include the fee that needs
  to be paid to the next hop.

- The incoming channel capacity "sanity" check does not include
  the fee to be paid to the current hop.
2018-06-28 13:53:45 +02:00
Wilmer Paulino
ddf8f2cb01
routing: allow specifying a fee limit during route construction 2018-06-12 18:14:48 -07:00
Sebastian Delgado
6746609ec6
Add constant and percentage-based fee limits to payments
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
2018-06-12 18:14:43 -07:00
Olaoluwa Osuntokun
f494433cbf
routing+server: add new QueryBandwidth method to reduce outbound failures
In this commit, we introduce a new method to the channel router's config
struct: QueryBandwidth. This method allows the channel router to query
for the up-to-date available bandwidth of a particular link. In the case
that this link emanates from/to us, then we can query the switch to see
if the link is active (if not bandwidth is zero), and return the current
best estimate for the available bandwidth of the link. If the link,
isn't one of ours, then we can thread through the total maximal
capacity of the link.

In order to implement this, the missionControl struct will now query the
switch upon creation to obtain a fresh bandwidth snapshot. We take care
to do this in a distinct db transaction in order to now introduced a
circular waiting condition between the mutexes in bolt, and the channel
state machine.

The aim of this change is to reduce the number of unnecessary failures
during HTLC payment routing as we'll now skip any links that are
inactive, or just don't have enough bandwidth for the payment. Nodes
that have several hundred channels (all of which in various states of
activity and available bandwidth) should see a nice gain from this w.r.t
payment latency.
2018-05-14 16:23:54 -07:00
Wilmer Paulino
beb08b3887
routing: add test for finding paths with additional edges 2018-04-20 04:01:33 -04:00
Wilmer Paulino
4598df054e
routing: modify findPath to take into account additional edges
In this commit, we modify our path finding algorithm to take an
additional set of edges that are currently not known to us that are
used to temporarily extend our graph with during a payment session.
These edges should assist the sender of a payment in successfully
constructing a path to the destination.

These edges should usually represent private channels, as they are not
publicly advertised to the network for routing.
2018-04-20 04:01:32 -04:00
Olaoluwa Osuntokun
d5721165de
routing: fix TestPathInsufficientCapacity to actually send 1 BTC 2018-03-23 17:55:15 -07:00
Olaoluwa Osuntokun
528aa67df7
routing: weight findPath more heavily towards fees during edge relaxation
In this commit, we modify the edgeWeight function that’s used within
the findPath method to weight fees more heavily than the time lock
value at an edge. We do this in order to greedily prefer lower fees
during path finding. This is a simple stop gap in place of more complex
weighting parameters that will be investigated later.

We also modify the edge distance to use an int64 rather than a float.
Finally an additional test has been added in order to excessive this
new change. Before the commit, the test was failing as we preferred the
route with lower total time lock.
2018-02-12 16:27:38 -08:00
Olaoluwa Osuntokun
8a29c01354
routing: modify FindRoutes to take a max number of routes to return 2018-02-12 16:19:52 -08:00
Olaoluwa Osuntokun
6751cd8b9f
routing: update package to account for recent channeldb API changes 2018-02-06 20:14:32 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Olaoluwa Osuntokun
d70e4bb0a0
routing: account for case where final destination send TemporaryChannelFailure
In this commit, we fix an existing bug that could cause lnd to crash if
we sent a payment, and the *destination* sent a temp channel failure
error message. When handling such a message, we’ll look in the nextHop
map to see which channel was *after* the node that sent the payment.
However, if the destination sends this error, then there’ll be no entry
in this map.

To address this case, we now add a prevHop map. If we attempt to lookup
a node in the nextHop map, and they don’t have an entry, then we’ll
consult the prevHop map.

We also update the set of tests to ensure that we’re properly setting
both the prevHop map and the nextHop map.
2018-01-10 15:15:55 -08:00
Matt Drollette
adf0d98194 multi: fix several typos in godoc comments 2017-12-17 18:40:05 -08:00
Olaoluwa Osuntokun
a78ff8ba04
routing: during path finding skip edges that are marked disabled
In this commit, we implement adherence of the disabled bit within a
ChannelUpdate during path finding. If a channel is marked as disabled,
then we won’t attempt to route through it. A test has been added to
exercise this new check.
2017-11-30 22:31:27 -08:00
Olaoluwa Osuntokun
73ccb76853
routing: update ChannelUpdate handling to recognize lnwire.ChanUpdateFlag 2017-11-30 22:24:35 -08:00
Laura Cressman
7408aa6c8d config+pathfind_test+notifications_test: format and fix newVertex import
Run go fmt so config file is formatted correctly. Also rename
newVertex to NewVertex in pathfind_test and notifications_test
as it is now exported from the routing package.
2017-11-15 16:50:19 -08:00
Laura Cressman
39d38da732 discovery: create deDupedAnnouncements struct in gosspier.go
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.

The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.

Also fix a few minor typos.
2017-11-15 16:50:19 -08:00
Olaoluwa Osuntokun
57b9b78ce3
routing: modify path finding tests to accommodate for flip in fee calc
Before this commit, we would expect that structurally we don’t pay any
fee for the first hop, but do for the final hop. After the latest
commit, this is now flipped as when we say fee, we mean the fee that we
need to pay to transit a link. For the final hop, there’s no additional
distance to be traveled, so the fee is nothing.
2017-10-24 18:29:23 -07:00
Olaoluwa Osuntokun
25614f67f8
routing: restore in memory selfNode within the ChannelRouter
In this commit we restore the in memory ChannelRouter as we’ll no
dynamically set the ChannelRouter’s pointer within he spec path finding
test example.
2017-10-22 18:36:59 -07:00
Olaoluwa Osuntokun
69a3783d55
routing: add new test case from spec to assert proper route calc 2017-10-22 18:36:52 -07:00
Olaoluwa Osuntokun
acd160a419
routing: update path finding tests to account for change in fee calculation 2017-10-22 18:36:51 -07:00
Olaoluwa Osuntokun
f5881ad3df
routing: only write a single edge as edges in test data are now directional 2017-10-22 18:36:47 -07:00
Olaoluwa Osuntokun
86283b0d06
routing: make setting source node optional when parsing testdata 2017-10-22 18:36:47 -07:00
Olaoluwa Osuntokun
e70031da7b
routing: properly assign flags and write both edges when parsing test data 2017-10-22 18:36:46 -07:00
Olaoluwa Osuntokun
4ff66efa2b
routing: convert testChan stuct to take an int64 for FeeRate 2017-10-22 18:36:46 -07:00
Olaoluwa Osuntokun
646f79f566
routing: perform path finding inside a single DB transaction
This commit modifies the path finding logic such that all path finding
is done inside a _single_ database transaction. With this change, we
ensure that we don’t end up possibly creating hundreds of database
transactions slowing down the path finding and payment sending process
all together.
2017-10-10 22:19:27 -07:00