Commit Graph

297 Commits

Author SHA1 Message Date
Johan T. Halseth
49efbefb43
routing/payment_session: remove prebuilt payment session
Since we no longer use payment sessions for send to route, we remove the
prebuilt one.
2020-04-02 10:24:35 +02:00
Johan T. Halseth
4509c4f3a9
routing: move ErrMaxRouteHopsExceeded check
Now that SendToRoute is no longer using the payment lifecycle, we move
the max hop check out of the payment shard's launch() method, and return
the error directly, such that it can be handled in SendToRoute.
2020-04-02 10:24:35 +02:00
Johan T. Halseth
6cc162e0b0
router: make sendToRoute omit payment lifecycle
Instead of having SendToRoute pull routes from the payment session in
the payment lifecycle, we utilize the new methods on the paymentShard to
launch and collect the result for this single route.

This also let us remove the check for noRouteError, as we will always
have the result from the tried attempt returned. A result of this is
that we can finally remove lastError from the payment lifecycle (see
next commits).
2020-04-02 10:24:35 +02:00
Johan T. Halseth
9712dd1a7f
routing/payment_lifecycle: extract attempt sending logic
Define shardHandler which is a struct holding what is needed to send
attempts along given routes. The reason we define the logic on this
struct instead of the paymentLifecycle is that we later will make
SendToRoute calls not go through the payment lifecycle, but only using
this struct.

The launch shard is responsible for registering the attempt with the
control tower, failing it if the launch fails. Note that it is NOT
responsible for marking the _payment_ failed in case a terminal error is
encountered. This is important since we will later reuse this method for
SendToRoute, where whether to fail the payment cannot be decided on the
shard level.
2020-04-02 10:24:34 +02:00
Johan T. Halseth
bcca1ab821
routing/payment_lifeycle: remove payment level attempt and circuit
We replace the cached attempt, and instead use the control tower
(database) to fetch any in-flight attempt. This is done as a
preparation for having multiple attempts in flight.

In addition we remove the cached circuit, as it won't be applicable when
multiple shards are in flight.

Instead of tracking the attemp we consult the database on every
iteration, and pick up any existing attempt. This also let us avoid
having to pass in the existing attempts from the payment loop, as we
just fetch them direclty.
2020-04-02 10:24:34 +02:00
Johan T. Halseth
79227bab3a
routing/route: define route.ReceiverAmt() method 2020-04-02 10:24:34 +02:00
Johan T. Halseth
00903ef9f5
routing/payment_session: make RequestRoute take max amt, fee limit and
active shards

In preparation for doing pathfinding for routes sending a value less
than the total payment amount, we let the payment session take the max
amount to send and the fee limit as arguments to RequestRoute.
2020-04-02 10:24:33 +02:00
Johan T. Halseth
f9eeb6b41f
routing/router+lifecycle: remove LightningPayment from payment lifecycle
Now that the information needed is stored by the paymentSession, we no
longer need to pass the LightningPayment into the payment lifecycle.
2020-04-02 10:24:33 +02:00
Johan T. Halseth
c2301c14b2
routing/payment_session: make NewPaymentSession take payment directly
This commit moves supplying of the information in the LightningPayment
to the initialization of the paymentSession, away from every call to
RequestRoute.

Instead the paymentSession will store this information internally, as it
doesn't change between payment attempts.

This is done to rid the RequestRoute call of the LightingPayment
argument, as for SendToRoute calls, it is not needed to supply the next
route.
2020-04-02 10:24:33 +02:00
Olaoluwa Osuntokun
28bbaa2a94
routing: convert to use new kvdb abstraction 2020-03-18 19:34:58 -07:00
Joost Jager
48c0e42c26
channeldb+routing: store all payment htlcs
This commit converts the database structure of a payment so that it can
not just store the last htlc attempt, but all attempts that have been
made. This is a preparation for mpp sending.

In addition to that, we now also persist the fail time of an htlc. In a
later commit, the full failure reason will be added as well.

A key change is made to the control tower interface. Previously the
control tower wasn't aware of individual htlc outcomes. The payment
remained in-flight with the latest attempt recorded, but an outcome was
only set when the payment finished. With this commit, the outcome of
every htlc is expected by the control tower and recorded in the
database.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2020-03-09 18:31:33 +01:00
Joost Jager
8558534417
routing: add clock to router config 2020-03-09 11:43:44 +01:00
Johan T. Halseth
bee2380441
channeldb: rename PaymentAttemptInfo to HTLCAttemptInfo
To better distinguish payments from HTLCs, we rename the attempt info
struct to HTLCAttemptInfo. We also embed it into the HTLCAttempt struct,
to avoid having to duplicate this information.

The paymentID term is renamed to attemptID.
2020-03-09 11:43:26 +01:00
Joost Jager
967b4b2dc3
channeldb: remove redundant MPPaymentCreationInfo struct
MPPaymentCreationInfo and PaymentCreationInfo are identical except for
the naming of CreationTime/CreationDate.
2020-03-09 11:43:24 +01:00
Joost Jager
06bdeb56e2
routing: add graph interface 2020-02-11 13:35:38 +01:00
Joost Jager
e9b7e80848
routing: remove path finding shortcut
This shortcut does not work when the destination is a private node. We
also don't have this shortcut for regular payments. This commit
aligns the behavior between SendPayment and QueryRoutes.
2020-01-15 20:32:45 +01:00
Carla Kirk-Cohen
7d356458e3
Merge pull request #3843 from carlaKC/htlcnotifier-0-switcherrors
[htlcnotifier 1/4]: Introduce Internal Errors
2020-01-15 08:46:38 +02:00
Joost Jager
5de308c4b5
routerrpc: update final cltv delta default
The default was increased for the main sendpayment RPC in commit
d3fa9767a9729756bab9b4a1121344b265410b1a. This commit sets the
same default for QueryRoutes, routerrpc.SendPayment and
router.EstimateRouteFee.
2020-01-14 21:03:24 +01:00
carla
b5a2d75465
htlcswitch+routing: type check on ClearTextError
Update the type check used for checking local payment
failures to check on the ClearTextError interface rather
than on the ForwardingError type. This change prepares
for splitting payment errors up into Link and Forwarding
errors.
2020-01-14 15:07:42 +02:00
carla
102f9b003f
htlcswitch: add ClearTextError interface
This commit adds a ClearTextError interface
which is implemented by non-opaque errors that
we know the underlying wire failure message for.
This interface is implemented by ForwardingErrors,
because we can fully decrypt the onion blob to
obtain the underlying failure reason. This interface
will also be implemented by errors which originate
at our node in following commits, because we know
the failure reason when we fail the htlc.

The lnwire interface is un-embedded in the
ForwardingError struct in favour of implementing
this interface. This change is made to protect
against accidental passing of a ForwardingError
to the wire, where the embedded FailureMessage
interface will present as wire failure but
will not serialize properly.
2020-01-14 15:07:41 +02:00
Joost Jager
81bf6e15b3
routing+lnrpc: add missing query routes parameters 2020-01-14 11:21:31 +01:00
Olaoluwa Osuntokun
128be259a7
routing: use updated sphinx.NewOnionPacket method
In this commit, we update the routing package to use the new
`sphinx.NewOnionPacket` method. The new version of this method allows us
to specify _how_ the packet should be filled before it's used to create
a mix-header. This isn't a fundamental change (totally backwards
compatible), instead it plugs a privacy leak that may have revealed to
the destination how long the true route was.
2020-01-07 16:11:39 -08:00
Joost Jager
72a6383975
routing: use absolute final expiry in pathfinding 2019-12-20 11:00:00 +01:00
Joost Jager
95ddab57fa
channeldb: add tx argument for FetchLightningNode
To allow execution within an existing tx.
2019-12-20 10:17:01 +01:00
Joost Jager
37d9ee302c
channeldb: take serialized key to fetch lightning node
This prevents inefficient key conversions in a follow up commit that
change the inner pathfinding loop.
2019-12-19 12:44:00 +01:00
Conner Fromknecht
f868bc128b
rpcserver+routerrpc: thread features + payment addr to SendPayment 2019-12-18 23:56:59 -08:00
Conner Fromknecht
495ae8ca42
routing: consolidate final hop params for newRoute
This commit creates a wrapper struct, grouping all parameters that
influence the final hop during route construction. This is a preliminary
step for passing in the receiver's invoice feature bits, which will be
used to select an appropriate payment or payload type.
2019-12-18 23:55:08 -08:00
Joost Jager
d85f378aa2
routing: move zero hops check 2019-12-16 14:53:47 +01:00
Joost Jager
d02de70d20
multi: do not use tlv.Record outside wire format handling
This commit prepares for more manipulation of custom records. A list of
tlv.Record types is more difficult to use than the more basic
map[uint64][]byte.

Furthermore fields and variables are renamed to make them more
consistent.
2019-12-12 00:14:58 +01:00
Joost Jager
b6eb3a69ba
routing+lnrpc+lncli: allow setting min htlc policy 2019-12-11 00:17:08 +01:00
Johan T. Halseth
8755a35860
Merge pull request #3667 from cfromknecht/log-fixes
fundingmanager+routing log touch ups
2019-11-20 15:57:05 +01:00
Joost Jager
a00a360018
Merge pull request #3739 from joostjager/incoming-restriction
routing: last hop restriction
2019-11-19 08:38:33 +01:00
Joost Jager
f28941c7e4
routing+routerrpc+lncli: enable last hop restriction for payments 2019-11-18 21:03:03 +01:00
nsa
929167b9af
routing: fix race condition when resuming payments 2019-11-15 14:44:05 -05:00
Olaoluwa Osuntokun
863d795c94
Merge pull request #3616 from Crypt-iQ/router_race_1019
ticker: add tickerMtx to prevent data race
2019-11-05 19:47:18 -08:00
Conner Fromknecht
0035e8b99d
routing/router: fix double hex encoding of target pubkey 2019-11-05 15:04:24 -08:00
nsa
b392dd1b95
routing: move statTicker to prevent race condition 2019-11-02 13:55:41 -04:00
Joost Jager
729c3a6bd6
routing: use unified policy for build route 2019-10-29 19:17:58 +01:00
Wilmer Paulino
0fc401de19
routing+routerrpc: take max cltv limit into account within path finding
With the introduction of the max CLTV limit parameter, nodes are able to
reject HTLCs that exceed it. This should also be applied to path
finding, otherwise HTLCs crafted by the same node that exceed it never
left the switch. This wasn't a big deal since the previous max CLTV
limit was ~5000 blocks. Once it was lowered to 1008, the issue became
more apparent. Therefore, all of our path finding attempts now have a
restriction of said limit in in order to properly carry out HTLCs to the
network.
2019-10-11 18:04:49 -04:00
Olaoluwa Osuntokun
6ebada112f
routing: update 3d party channel verification to use new chanvalidate package
In the process of moving to use the new package, we no longer need to
fetch the outpoint directly, and instead only need to pass the funding
transaction into the new verification logic.
2019-10-03 16:23:17 -07:00
Olaoluwa Osuntokun
18f88cbd8d
Merge pull request #3440 from joostjager/buildroute
routing: add build route functionality
2019-09-24 20:24:24 -07:00
Joost Jager
299821152a
routing+routerrpc: add BuildRoute function 2019-09-24 10:00:44 +02:00
Valentine Wallace
9a52cb6dab
multi: update internals to support updating max htlc
In this commit, we update the router and link to support users
updating the max HTLC policy for their channels. By updating these internal
systems before updating the RPC server and lncli, we protect users from
being shown an option that doesn't actually work.
2019-09-23 13:07:10 +02:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Joost Jager
ff0c5a0d5e
routing: process successes in mission control
This commit modifies paymentLifecycle so that it not only feeds
failures into mission control, but successes as well.
This allows for more accurate probability estimates. Previously,
the success probability for a successful pair and a pair with
no history was equal. There was no force that pushed towards
previously successful routes.
2019-08-23 09:15:41 +02:00
Olaoluwa Osuntokun
4697cfde30
routing: extend path finding to be TLV-EOB aware, allow dest TLV records
In this commit, we extend the path finding to be able to recognize when
a node needs the new TLV format, or the legacy format based on the
feature bits they expose. We also extend the `LightningPayment` struct
to allow the caller to specify an arbitrary set of TLV records which can
be used for a number of use-cases including various variants of
spontaneous payments.
2019-08-22 18:53:01 -07:00
Joost Jager
e7af6a077a
routing: convert to nillable failure reason
This commit converts several functions from returning a bool and a
failure reason to a nillable failure reason as return parameter. This
will take away confusion about the interpretation of the two separate
values.
2019-08-17 10:23:57 +02:00
Joost Jager
f1769c8c8c
routing: convert to node pair based
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
2019-08-13 19:21:37 +02:00
Joost Jager
7e7b620355
routing: persist mission control data 2019-07-31 08:44:00 +02:00
Joost Jager
b4a7665bae
routing: provide payment id to mission control 2019-07-29 09:38:32 +02:00