Commit Graph

500 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
4697cfde30
routing: extend path finding to be TLV-EOB aware, allow dest TLV records
In this commit, we extend the path finding to be able to recognize when
a node needs the new TLV format, or the legacy format based on the
feature bits they expose. We also extend the `LightningPayment` struct
to allow the caller to specify an arbitrary set of TLV records which can
be used for a number of use-cases including various variants of
spontaneous payments.
2019-08-22 18:53:01 -07:00
Olaoluwa Osuntokun
5b4c8ac232
routing/route+tlv: add new TLV-EOB awareness to Hop+Route
In this commit, we extend the Hop struct to carry an arbitrary set of
TLV values, and add a new field that allows us to distinguish between
the modern and legacy TLV payload.

We add a new `PackPayload` method that will be used to encode the
combined required routing TLV fields along any set of TLV fields that
were specified as part of path finding.

Finally, the `ToSphinxPath` has been extended to be able to recognize if
a hop needs the modern, or legacy payload.
2019-08-22 18:53:00 -07:00
Joost Jager
d9ec158412
routing: stricter payment result interpretation
This commit overhauls the interpretation of failed payments. It changes
the interpretation rules so that we always apply the strongest possible
set of penalties, without making assumptions that would hurt good nodes.

Main changes are:

- Apply different rule sets for intermediate and final nodes. Both types
of nodes have different sets of failures that we expect. Penalize nodes
that send unexpected failure messages.

- Distinguish between direct payments and multi-hop payments. For direct
payments, we can infer more about the performance of our peer because we
trust ourselves.

- In many cases it is impossible for the sender to determine which of
the two nodes in a pair is responsible for the failure. In this
situation, we now penalize bidirectionally. This does not hurt the good
node of the pair, because only its connection to a bad node is
penalized.

- Previously we always penalized the outgoing connection of the
reporting node. This is incorrect for policy related failures. For
policy related failures, it could also be that the reporting node
received a wrongly crafted htlc from its predecessor. By penalizing the
incoming channel, we surely hit the responsible node.

- FailExpiryTooSoon is a failure that could have been caused by any node
up to the reporting node by delaying forwarding of the htlc. We don't
know which node is responsible, therefore we now penalize all node pairs
in the route.
2019-08-17 10:24:09 +02:00
Joost Jager
e7a457f1ce
routing: query bandwidth hints before each payment attempt
Previously the bandwidth hints were only queried once per payment. This
did not allow for concurrent payments changing channel balances.
2019-08-17 10:24:07 +02:00
Joost Jager
e135cf7326
routing: penalize all node pairs for unknown outcomes
When an undecryptable failure comes back for a payment attempt, we
previously only penalized our own outgoing connection. However,
any node could have caused this failure. It is therefore better to
penalize all node connections along the route. Then at least we know for
sure that we will hit the responsible node.
2019-08-17 10:24:03 +02:00
Joost Jager
c39d7a29cd
routing/test: do not test local channel mission control
This commit updates existing tests to not rely on mission control for
pruning of local channels. Information about local channels should
already be up to date before path finding starts. If not, the problem
should be fixed where bandwidth hints are set up.
2019-08-17 10:24:01 +02:00
Joost Jager
45dacd0df1
routing: isolate failure interpretation from mission control
This commit moves the payment outcome interpretation logic into a
separate file. Also, mission control isn't updated directly anymore, but
results are stored in an interpretedResult struct. This allows the
mission control state to be locked for a minimum amount of time and
makes it easier to unit test the result interpretation.
2019-08-17 10:23:59 +02:00
Joost Jager
e7af6a077a
routing: convert to nillable failure reason
This commit converts several functions from returning a bool and a
failure reason to a nillable failure reason as return parameter. This
will take away confusion about the interpretation of the two separate
values.
2019-08-17 10:23:57 +02:00
Joost Jager
f1769c8c8c
routing: convert to node pair based
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
2019-08-13 19:21:37 +02:00
Joost Jager
a332990d2c
routing/route: add vertex constructor from bytes 2019-08-13 18:45:08 +02:00
Joost Jager
b610f417d2
routing: extended DirectedNodePair functionality 2019-08-13 18:45:06 +02:00
Joost Jager
2b4debf42b
routing/test: remove unused methods from mock 2019-08-13 18:45:02 +02:00
Joost Jager
aabd68ebcd
multi: rename FailUnknownPaymentHash to FailIncorrectDetails
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
2019-08-08 11:04:17 +02:00
Joost Jager
7e7b620355
routing: persist mission control data 2019-07-31 08:44:00 +02:00
Joost Jager
9e26f0d079
routing: define payment result
This commit groups together all payment result data. It is a preparation
for historical payment results being retrieved from the database.
2019-07-29 09:38:36 +02:00
Joost Jager
1507ff6590
routing: extract timestamp from applying payment result
This commit prepares for timestamps being supplied from the database for
processing of historical payment results.
2019-07-29 09:38:34 +02:00
Joost Jager
b4a7665bae
routing: provide payment id to mission control 2019-07-29 09:38:32 +02:00
Joost Jager
334b6a3bfe
routing: move unreadable failure handling into mission control 2019-07-29 09:38:30 +02:00
Joost Jager
934ea8e78d
routing: move failure interpretation into mission control 2019-07-29 09:38:26 +02:00
nsa
7762d55e80 itest+routing: updating tests to account for BlockPadding 2019-07-23 21:03:30 -04:00
nsa
3dde7bc4e2 routing: adding the BlockPadding value to sendpayment
This commit adds the BlockPadding value (currently 3) to sendpayment
calls so that if some blocks are mined while the htlc is in-flight, the
exit hop won't reject it.
2019-07-23 21:03:11 -04:00
Olaoluwa Osuntokun
8c389d13f9
Merge pull request #3197 from breez/optimize_prune_zombie_channels
Optimize prune zombie channels
2019-07-18 20:56:56 -07:00
Roei Erez
da9edc876a router: only prune disabled channels when AssumeChannelValid=true. 2019-07-18 17:05:20 +03:00
Joost Jager
34b264a3d8
routing: create PathFindingConfig for global parameters 2019-07-18 15:49:25 +02:00
Olaoluwa Osuntokun
92e14af72a
Merge pull request #3298 from joostjager/globalize-mc
routing: globalize mc
2019-07-16 17:39:36 -07:00
Roei Erez
9781ea0082 router: Optimize pruneZombieChannels.
The current approach iterates all channels in the graph in order to
filter those in need. This approach is time consuming, several seconds
on my mobile device for ~40,000 channels, while during this time the
db is locked in a transaction.

The proposed change is to use an existing functionality that utilize the
fact that channel update are saved indexed by date. This method enables
us to go over only a small subset of the channels, only those that
were updated before the "channel expiry" time and further filter
them for our need.
The same graph that took several seconds to prune was pruned, after
the change, in several milliseconds.

In addition for testing purposes I added Initiator field to the
testChannel structure to reflect the channeldEdgePolicy direction.
2019-07-16 17:48:07 +03:00
Joost Jager
8055bcf2e0
routing: report failures to mission control directly
As there is no more state kept in the payment session, failure reporting
can go straight to mission control.
2019-07-13 22:38:25 +02:00
Joost Jager
dc13da5abb
routing: move second chance logic into mission control
If nodes return a channel policy related failure, they may get a second
chance. Our graph may not be up to date. Previously this logic was
contained in the payment session.

This commit moves that into global mission control and thereby removes
the last mission control state that was kept on the payment level.

Because mission control is not aware of the relation between payment
attempts and payments, the second chance logic is no longer based
tracking second chances given per payment.

Instead a time based approach is used. If a node reports a policy
failure that prevents forwarding to its peer, it will get a second
chance. But it will get it only if the previous second chance was
long enough ago.

Also those second chances are no longer dependent on whether an
associated channel update is valid. It will get the second chance
regardless, to prevent creating a dependency between mission control and
the graph. This would interfer with (future) replay of history, because
the graph may not be the same anymore at that point.
2019-07-13 22:38:23 +02:00
Joost Jager
d31efddf1b
routing: move generateBandwidthHints 2019-07-13 22:38:21 +02:00
Joost Jager
37e2751695
routing+routerrpc: isolate payment session source from mission control 2019-07-13 22:38:19 +02:00
Joost Jager
cf3dd3fb94
routing/test: create mission control test context 2019-07-13 22:38:17 +02:00
nsa
7e6a34532e routing: add index map to distanceHeap
This commit adds the pubkeyIndices map to the distanceHeap to avoid
duplicate entries on the heap. This happened in the earlier iteration
of the findPath algorithm and would cause the driving loop to
evaluate already evaluated entries when there was no need.
2019-07-12 06:08:01 -04:00
nsa
61a1ab08fb routing+channeldb: findPath uses Vertex instead of LightningNode
This commit modifies the nodeWithDist struct to use a route.Vertex
instead of a *channeldb.LightningNode. This change, coupled with
the new ForEachNodeChannel function, allows the findPath Djikstra's
algorithm to cut down on database lookups since we no longer need
to call the FetchOtherNode function.
2019-07-12 06:08:01 -04:00
Joost Jager
2726f50d7c
htlcswitch: do not consider unknown failures an error 2019-07-11 19:49:49 +02:00
Joost Jager
418fe364de
htlcswitch: use distinct error for unreadable failures 2019-07-11 19:49:45 +02:00
Joost Jager
2b47632b26
htlcswitch+routing+routerrpc: return error source as index 2019-07-11 10:37:26 +02:00
Joost Jager
569f821142
routing/test: allow arbitrary graph source nodes 2019-07-11 10:37:22 +02:00
Olaoluwa Osuntokun
ba5fbb3c27
Merge pull request #3156 from joostjager/extended-fail
routerrpc: add more failure reasons and route hints
2019-07-08 19:12:03 -07:00
Joost Jager
5ce04091d8
routing+routerrpc+channeldb: return route on invalid payment details 2019-07-04 09:27:16 +02:00
Joost Jager
7bc56f5a7b
routing: add subscriber event constructors 2019-07-04 09:27:14 +02:00
Joost Jager
ae46fb00cb
routing+channeldb: add more failure reasons 2019-07-04 09:27:12 +02:00
nsa
678fb674eb routing: move call to PruneGraph outside of the collating loop
This commit moves the call to PruneGraph outside of the loop
that collates all of the spentOutputs. With this change, if
a node has been offline for a long period of time, resyncing
with the chain no longer takes up as much memory (1MB vs 200MB
in some cases) or time. Previously, PruneGraph was called
for every block and allocated a very large map further down
in the pruneGraphNodes function. Now, pruneGraphNodes is only
called once.
2019-07-02 21:21:28 -04:00
Johan T. Halseth
8b83f03308
rpcserver+router: log terminal sendPayment error 2019-07-01 16:22:57 -07:00
Conner Fromknecht
3a4aba463b
routing+watchtower/wtclient: prints stats once per minute 2019-06-19 20:07:11 -07:00
Olaoluwa Osuntokun
5f4accd39f
Merge pull request #3195 from halseth/routeing-nil-copy-pubkey
routing+zpay32: copy pubkeys before nilling Curve and spewing
2019-06-18 17:19:25 -07:00
Conner Fromknecht
529db69ec9
routing/router: log aggregate graph processing stats 2019-06-13 18:18:30 -07:00
Johan T. Halseth
386f8ece54
routing+zpay32: copy pubkeys before nilling Curve and spewing
Since nilling the pubkey curve will lead to a nil-pointer exception if
the key is later used for signature verification, we make sure to make a
copy before nilling and spewing.
2019-06-12 12:19:43 +02:00
Wilmer Paulino
c4546081c3
Merge pull request #3172 from joostjager/sendtoroute-timeout
routing+lnrpc: move default payment timeout out of router
2019-06-11 16:27:19 -07:00
Johan T. Halseth
5485101f9f
Merge pull request #3170 from cfromknecht/remove-router-reject-cache
routing/router: remove router-level reject cache
2019-06-11 21:52:27 +02:00
Joost Jager
2e920de292
routing+lnrpc: move default payment timeout out of router
This commit moves the default timeout out of router and thereby fixes a
bug that caused SendToRoute to not return the actual error, but a
timeout result instead. SendToRoute only tries a single route, so a
timeout should never happen.
2019-06-11 08:36:17 +02:00