Commit Graph

284 Commits

Author SHA1 Message Date
Joost Jager
1f41a2abce
htlcswitch: abtract invoice from link
This commit detaches signaling the invoice registry that an htlc was
locked in from the actually settling of the htlc.

It is a preparation for hodl invoices.
2019-03-15 10:09:15 +01:00
Joost Jager
c23bb5b3f1
htlcswitch: extract settle invoice into method 2019-03-15 10:09:03 +01:00
Joost Jager
19f79613df
channeldb: store hold invoice 2019-03-15 10:08:55 +01:00
Joost Jager
4141773e90
htlcswitch: resolve invoice cancelation race condition
Previously it could happen that an invoice was open at the time of the
LookupInvoice call, the htlc was settled because of that, but when the
SettleInvoice call was made eventually, it would fail because the
invoice was canceled in the mean time. The htlc would then be settled,
but the invoice not marked as such.
2019-03-15 10:08:46 +01:00
Joost Jager
eb598ec7a4
htlcswitch: extract exit hop processing to method 2019-03-15 10:08:43 +01:00
Valentine Wallace
f0e668974e htlcswitch/link: verify an htlc is not too large in HtlcSatifiesPolicy
Before forwarding an HTLC, ensure that the amount to forward
including fees does not exceed the max HTLC set for the channel
link.
2019-02-21 18:45:37 -08:00
Valentine Wallace
20b3114100 htlcswitch+lnwallet+peer: default max htlc in fwding policy of new chans
In this commit, we set a default max HTLC in the forwarding
policies of newly open channels.

The ForwardingPolicy's MaxHTLC field (added in this commit)
will later be used to decide whether an HTLC satisfies our policy before
forwarding it.

To ensure the ForwardingPolicy's MaxHTLC default matches the max HTLC
advertised in the ChannelUpdate sent out for this channel,  we also add
a MaxPendingAmount() function to the lnwallet.Channel.
2019-02-21 18:39:32 -08:00
Conner Fromknecht
76cecb1396
htlcswitch/link: batch write to preimage cache
This commit makes use of the batched AddWitness
method of the WitnessCache, in order to avoid
performing one write for each accepted preimage.

Additionally, this fixes an existing hole in the
consistency guarantees since the batched writes
are now guaranteed to take place before accepting
the next CommitSig. Previously, these writes were
processed in an unsynchronized go routine that
could be delayed arbitrarily long before being
executed.

With this change, the async_payments_benchmarks
actually shows a slight improvement in
performance, presumably because we no longer do
an individual write per preimage, even though
the execution is now explicitly in the critical
path. There is likely also a marginal performance
improvement from the reduction in goroutine
overhead.
2019-02-19 17:06:15 -08:00
Conner Fromknecht
29f07a58cb
cnct+lnwl+hswc: use lntypes.Preimage for witness beacon 2019-02-19 17:06:00 -08:00
Conner Fromknecht
30f61b7630
multi: make AddPreimage variadic, optimistically compute key
In this commit, we modify the WitnessCache's
AddPreimage method to accept a variadic number
of preimages. This enables callers to batch
preimage writes in performance critical areas
of the codebase, e.g. the htlcswitch.

Additionally, we lift the computation of the
witnesses' keys outside of the db transaction.
This saves us from having to do hashing inside
and blocking other callers, and limits extraneous
blocking at the call site.
2019-02-19 17:05:04 -08:00
Joost Jager
1b87fbfab2
invoices+htlcswitch+lnrpc: cancel invoice 2019-02-06 07:29:18 +01:00
Valentine Wallace
f6cffa8f4b htlcswitch/link: add ChannelPoint() to retrieve the channel outpoint.
This function will be used in the switch to retrieve the channel point for a link,
allowing the switch to retrieve individual channels from the database.
2019-02-05 18:17:54 -08:00
Joost Jager
bacd92418a
invoices: use lntypes.Hash and lntypes.Preimage
Previously chainhash.Hash was used, which converts to/from string in
reversed format. Payment hashes and preimages are supposed to be
non-reversed.
2019-02-01 09:42:29 +01:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
orbitalturtle
08750f180b multi: deprecate IncorrectHtlcAmount onion error
In this commit, we deprecate the `IncorrectHtlcAmount` onion error.
We'll still decode this error to use when retrying paths, but we'll no
longer send this ourselves. The `UnknownPaymentHash` error has been
amended to also include the value of the payment as well. This allows us
to worry about one less error.
2019-01-29 18:21:13 -08:00
Johan T. Halseth
480f43f1dc
lnwallet/channel: add lnwire<->PaymentDescriptor FeeUpdate conversion
This commit adds conversion between the lnwire.UpdateFee message and the
new FeeUpdate PaymentDescriptor. We re-purpose the existing Amount field
in the PaymentDescriptor stuct to hold the feerate.
2019-01-10 12:26:33 +01:00
Joost Jager
5515713b88
channeldb: convert settled boolean to state
This commit is a preparation for the addition of new invoice
states. A database migration is not needed because we keep
the same field length and values.
2019-01-04 07:53:55 +01:00
Olaoluwa Osuntokun
152fc8b1f1
Merge pull request #2329 from Roasbeef/global-sig-pool
multi: replace per channel sigPool with global daemon level sigPool
2018-12-17 16:33:56 -08:00
Wilmer Paulino
e71151f56a htlcswitch/link: return FinalFailExpiryTooSoon for last htlc
In this commit, we fix a minor discrepancy with the spec. We should
return a FinalFailExpiryTooSoon error, rather than a
FinalFailIncorrectCltvExpiry error, when the last HTLC of a route (exit
hop) has an expiration height that is deemed too soon by the final
destination of the HTLC.
2018-12-17 15:26:11 -05:00
Olaoluwa Osuntokun
fa160f559c
multi: replace per channel sigPool with global daemon level sigPool
In this commit, we remove the per channel `sigPool` within the
`lnwallet.LightningChannel` struct. With this change, we ensure that as
the number of channels grows, the number of gouroutines idling in the
sigPool stays constant. It's the case that currently on the daemon, most
channels are likely inactive, with only a hand full actually
consistently carrying out channel updates. As a result, this change
should reduce the amount of idle CPU usage, as we have less active
goroutines in select loops.

In order to make this change, the `SigPool` itself has been publicly
exported such that outside callers can make a `SigPool` and pass it into
newly created channels. Since the sig pool now lives outside the
channel, we were also able to do away with the Stop() method on the
channel all together.

Finally, the server is the sub-system that is currently responsible for
managing the `SigPool` within lnd.
2018-12-16 15:40:14 -08:00
Johan T. Halseth
a9bd6100ff
htlcswitch/link: remove handled TODO 2018-11-21 10:28:57 +01:00
Johan T. Halseth
676a1b1407
lnwallet+link: make ChanSyncMsg take channel state as arg
This lets us get the channel reestablish message without creating the LightningChannel struct first.
2018-11-21 10:28:56 +01:00
Joost Jager
1d97cf1229
htlcswitch+routing: implement expiry_too_far failure
In this commit we add a check to HtlcSatifiesPolicy to verify that the
time lock for the outgoing htlc that is requested in the onion packet
isn't too far in the future.

Without this check, anyone could force an unreasonably long time lock on
the forwarding node.
2018-10-15 08:51:08 +02:00
Olaoluwa Osuntokun
5cf911a762
Merge pull request #1764 from cfromknecht/isolate-fwdpkg-to-live-links
htlcswitch/link: only resovle+gc fwdpkgs for live channels
2018-08-24 17:42:44 -07:00
Conner Fromknecht
211a0299e9
htlcswitch/link: only resovle+gc fwdpkgs for live channels 2018-08-21 19:10:16 -07:00
Conner Fromknecht
81b4af2ec8
htlcswitch/link: cleanup spurious fail/settle responses 2018-08-21 17:13:58 -07:00
Conner Fromknecht
3fb6a310f8
htlcswitch/link: remove circuit deletion forgiveness
This commit removes the concept of "circuit deletion
forgivness" from the link. This was originally
implemented due to the strict semantics of the original
DeleteCircuit implementation, which would fail if we tried
to delete unknown circuits. Forgivness is used on startup
to ignore this error in case the circuits had already been
deleted before shutting down.

Now that the circuit deletion has been relaxed, this
behavior is no longer necessary, as requests to delete
unknown (or previously deleted) circuits will be ignored.

This is necessary for future changes regarding switch
cleanup, which may attempt to cleanup already deleted
circuits.
2018-08-20 16:45:42 -07:00
Conner Fromknecht
0fef1c71fe
htlcswitch/link: pass link quit to ForwardPackets 2018-08-10 11:42:26 -07:00
Conner Fromknecht
b507d265b4
htlcswitch/link: only update contract signals on start if live link 2018-08-10 11:42:25 -07:00
Olaoluwa Osuntokun
d3b1b9aa98
Merge pull request #1668 from cfromknecht/interface-tickers
Ticker Package
2018-08-09 20:55:25 -07:00
Wilmer Paulino
9d2eeb6304
multi: update to latest fee estimation interface 2018-08-09 17:29:52 -07:00
Conner Fromknecht
1c456a5144
htlcswitch/link: replace batch ticker with...
resumable ticker.Ticker interface
2018-08-09 02:48:06 -07:00
Conner Fromknecht
cf2c371042
multi: fix linting errors 2018-08-02 18:20:50 -07:00
Olaoluwa Osuntokun
1e39cfc65f
Merge pull request #1364 from halseth/data-loss-protect
Data loss protection
2018-07-31 20:53:42 -07:00
Johan T. Halseth
ebed786b2a
htlcswitch/link: inspect sync errors, force close channel
This commit makes the link inspect the error encountered during channel
sync, force closing the channel if we detect a remote data loss.
2018-07-31 15:16:23 +02:00
Conner Fromknecht
5af19bb2b4
htlcswitch/link: reusable BatchTicker
This commit modifies the default BatchTicker
implementation such that it will generate a
new ticker with each call to Start(). This
allows us to create a new ticker after
releasing an old one due to the batch
being empty.
2018-07-30 22:33:37 -07:00
Conner Fromknecht
bd9a6bd625
htlcswitch/link: conditional batch ticker
In this commit, we prevent the htlcManager from
being woken up by the batchTicker when there is no
work to be done. Profiling has shown a significant
portion of CPU time idling, since the batch ticker
endlessly demands resources. We resolve this by only
selecting on the batch ticker when we have a
non-empty batch of downstream packets from the
switch.
2018-07-30 21:44:49 -07:00
Conner Fromknecht
d76bacee0e
htlcswitch/link: send FailFinalExpiryTooSoon from exit hop
This commit corrects our exit hop logic to return
FailFinalExpiryTooSoon if the following check is true:
   pd.Timeout-expiryGraceDelta <= heightNow

Previously we returned FailFinalIncorrectCltvExpiry, which
should only be returned if the packet was misconstructed.
2018-07-27 15:52:09 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Olaoluwa Osuntokun
a32f2b79da
htlcswitch: modify the InvoiceDatabase interface to allow specifying final payment amt
In this commit, we modify the InvoiceDatabase slightly to allow the link
to record what the final payment about for an invoice was. It may be the
case that the invoice actually had no specified value, or that the payer
paid more than necessary. As a result, it's important that our on-disk
records properly reflect this.

To fix this issue, the SettleInvoice method now also accepts the final
amount paid.

Fixes #856.
2018-07-06 12:21:55 -07:00
Olaoluwa Osuntokun
0a045f8651
Merge pull request #1482 from cfromknecht/uniform-fee-update-timeout
htlcswitch/link: correct bias in fee update backoff
2018-07-03 22:27:22 -05:00
Olaoluwa Osuntokun
3ad15c5f42
hltcswitch: use a logClosure to delay spew evaluation until log print time 2018-06-30 17:15:04 -05:00
Conner Fromknecht
5fa8124aa1
htlcswitch/link: correct bias in fee update backoff
This commit corrects the distribution used to
schedule a link's randomized backoff for fee
updates. Currently, our algorithm biases the
lowest value in the range, with probability
equal to lower/upper, or the ratio of the lower
bound to the upper. This distribution is skewed
more heavily as lower approaches upper.

The solution is to sample a random value in the
range upper-lower, then add this to our lower
bound. The effect is a uniformly distributed
timeout in [lower, upper).
2018-06-30 10:22:38 -07:00
Olaoluwa Osuntokun
2196d9375e
htlcswitch: obtain the min final CLTV delta directly from the InvoiceDatabase
In this commit, we modify the existing logic that would attempt to read
the min CLTV information from the invoice directly. With this route, we
avoid any sort of DB index modifications, as this information is already
stored within the payment request, which is already available to the
outside callers. By modifying the InvoiceDatabase interface, we avoid
having to make the switch aware of what the "primary" chain is.
2018-06-29 16:03:13 -07:00
Olaoluwa Osuntokun
3a47c41c6b
Merge pull request #1448 from Roasbeef/check-invoice-min-final
channeldb+htlcswitch: use the final min cltv delta in the invoice when link at exit hop
2018-06-28 18:39:33 -07:00
Olaoluwa Osuntokun
a2f0d6d38e
htlcswitch: use the delta within the time lock, not the default policy at exit node
In this commit, we fix a lingering bug within the link when we're the
exit node for a particular payment. Before this commit, we would assert
that the invoice gives us enough of a delta based on our current routing
policy. However, if the invoice was generated with a lower delta, or
we've changed from the default routing policy, then this would case us
to fail back any payments sent to us.

We fix this by instead using the newly available final CLTV delta
information within the extracted invoice.

Fixes #1431.
2018-06-26 19:50:04 -07:00
Olaoluwa Osuntokun
ec7cfc6906
Merge pull request #1447 from Roasbeef/forwarding-timelock-fix
routing+htlcswitch: finalize switch of CLTV delta directionality in path finding and link forwarding
2018-06-26 19:47:46 -07:00
Conner Fromknecht
66c4240234
htlcswitch/link: add WaitForShutdown method for testing 2018-06-26 18:28:54 -07:00
Olaoluwa Osuntokun
bdecc5bea9
htlcswitch: update forwarding policy verification to use new time lock info 2018-06-26 17:29:42 -07:00
Olaoluwa Osuntokun
7b4c150983
htlcswitch: add new incoming+outgoing timeout fields to htlcPacket 2018-06-26 17:29:41 -07:00
Olaoluwa Osuntokun
2bb5931bb7
htlcswitch: move timelock policy verification logic to HtlcSatifiesPolicy
In this commit, we extract the time lock policy verification logic from
the processRemoteAdds method to the HtlcSatifiesPolicy method. With this
change, we fix a lingering bug within the link: we'll no longer verify
time lock polices within the incoming link, instead we'll verify it at
forwarding time like we should. This is a bug left over from the switch
of what the CLTV delta denotes in the channel update message we made
within the spec sometime last year.
2018-06-26 17:29:41 -07:00
Olaoluwa Osuntokun
74ec9147b1
htlcswitch: extend the HtlcSatifiesPolicy to also accept timelock/height info
In this commit, we extend the existing HtlcSatifiesPolicy method to also
accept timelock and height information. This is required as an upcoming
commit will fix an existing bug in the forwarding logic wherein we use
the time lock policies of the incoming node rather than that of the
outgoing node.
2018-06-26 17:29:40 -07:00
yohei okada
7b37cbd2d9
htlcswitch: add basic table driven tests for ExpectedFee 2018-06-15 17:29:02 +09:00
Wilmer Paulino
8198466972
multi: move block epochs dependency from links to switch
In this commit, we move the block height dependency from the links in
the switch to the switch itself. This is possible due to a recent change
on the links no longer depending on the block height to update their
commitment fees.

We'll now only have the switch be alerted of new blocks coming in and
links will retrieve the height from it atomically.
2018-06-13 17:41:21 -07:00
Wilmer Paulino
4cc60493d2
peer+htlcswitch: randomize link commitment fee updates
In this commit, we modify the behavior of links updating their
commitment fees. Rather than attempting to update the commitment fee for
each link every time a new block comes in, we'll use a timer with a
random interval between 10 and 60 minutes for each link to determine
when to update their corresponding commitment fee. This prevents us from
oscillating the fee rate for our various commitment transactions.
2018-06-13 17:41:01 -07:00
Conner Fromknecht
4380c67124
htlcswitch/link: upgrade to use lnpeer.Peer.SendMessage 2018-06-08 16:29:49 -07:00
Olaoluwa Osuntokun
4bde4c1c26
Merge pull request #1333 from Roasbeef/min-fee-rate
funding+htlcswitch: enforce min fee rate of 253 sat/kw on commitments
2018-06-06 21:00:13 -07:00
Conner Fromknecht
c180065a84
htlcswitch/link: remove deadlock in htlc validation
This commit removes a possible deadlock in the switch,
which can be triggered under certain failure conditions.
Previously, we would acquire the link's read lock for
the duration of HtlcSatisfiesPolicy, though we only
need to use it grab the current policy. The deadlock could
be caused in the cases where we attempt to log the failure,
which access the read-protected ShortChanID method.
2018-06-06 18:11:36 -07:00
Olaoluwa Osuntokun
8f68d0e605
funding+htlcswitch: enforce min fee rate of 253 sat/kw on commitments
In this commit, we add and enforce a min fee rate for commitment
transactions created, and also any updates we propose to the remote
party. It's important to note that this is only a temporary patch, as
nodes can dynamically raise their min fee rate whenever their mempool is
saturated.

Fixes #1330.
2018-06-05 17:50:50 -07:00
Johan T. Halseth
f95ae1cdd6
htlcswitch/link: add failed variable to ensure exit 2018-05-25 06:58:24 +02:00
Johan T. Halseth
49fd3f34d4
htlcswitch/link: settle with fake preimage if BogusSettle active 2018-05-25 06:58:24 +02:00
Johan T. Halseth
fbec83699c
htlcswitch/link: make fail() call OnChannelFailure with LinkFailureError
Adds a new closure OnChannelFailure to the link config, which is called
when the link fails. This function closure should use the given
LinkFailureError to properly force close the channel, send an error to
the peer, and disconnect the peer.
2018-05-25 06:58:23 +02:00
Conner Fromknecht
3e46a5e815
htlcswitch/link: fix UpdateShortChanID 2018-05-09 16:07:25 -07:00
Olaoluwa Osuntokun
ddcbb40898
Merge pull request #1206 from wpaulino/temp-chan-failure-update
htlcswitch+server: ensure we always send an update w/ a TempChannelFailure
2018-05-08 19:33:20 -07:00
Conner Fromknecht
de9de771bb
htlcswitch/link: ensure circuits are committed in-order
This commit makes the call to forwardBatch after locking
in Adds synchronous. This ensures that circuits for any Add
packets are added to the switch in the same order that they
are prescribed in the channel state. Though it is very unlikely
this case would arise, it may happen under more greater loads.

In addition, this also makes some trivial optimizations wrt. to
not spawning unnecessary goroutines if no settle/fail packets
are locked in.
2018-05-08 16:37:35 -07:00
Olaoluwa Osuntokun
72f48b6abe
htlcswitch+server: ensure we always send an update w/ a TempChannelFailure
In this commit, we ensure that any time we send a TempChannelFailure
that's destined for a multi-hop source sender, then we'll always package
the latest channel update along with it.
2018-05-08 13:00:28 -04:00
littleskunk
d2a6c4eec9 htlcswitch: typo fix 2018-05-07 21:33:32 -07:00
Olaoluwa Osuntokun
ddd12eff9c
htlcswitch: move link trimming to link start up
In this commit, we fix a race in the set of TestChannelLinkTrimCircuits*
tests. Before this commit, we would trim the circuits in the htlcManager
goroutine. However, this was problematic as the scheduling order of
goroutines isn't predictable. Instead, we'll now trim the circuits in
the Start method.

Additionally, we fix a series of off-by-2 bugs in the tests themselves.
2018-05-03 20:11:52 -07:00
Conner Fromknecht
42a9a78180
htlcswitch/link: trim fix 2018-05-02 01:12:18 -07:00
Conner Fromknecht
a36e1e6278
htlcswitch/link: adds HodlFlag breakpoints
This commit inserts an initial set of HodlFlags into
their correct places within the switch. In lieu of the
existing HtlcHodl mode, it is been replaced with a
configurable HodlMask, which is a bitvector representing
the desired breakpoints. This will allow for fine grained
testing of the switch's internals, since we can create
arbitrary delays inside a otherwise asynchronous system.
2018-05-02 00:18:51 -07:00
Johan T. Halseth
bc6b8a7eeb
htlcswitch/link: rename UnilateralClose -> RemoteUnilateralClose 2018-04-25 09:37:22 +02:00
Dimitris Tsapakidis
4009f7f874 multi: fix typos in comments 2018-04-17 19:03:27 -07:00
Olaoluwa Osuntokun
7037d55f65
htlcswitch: perform fee related checks at forwarding time
In this commit, we fix a very old, lingering bug within the link. When
accepting an HTLC we are meant to validate the fee against the
constraints of the *outgoing* link. This is due to the fact that we're
offering a payment transit service on our outgoing link. Before this
commit, we would use the policies of the *incoming* link. This would at
times lead to odd routing errors as we would go to route, get an error
update and then route again, repeating the process.

With this commit, we'll properly use the incoming link for timelock
related constraints, and the outgoing link for fee related constraints.
We do this by introducing a new HtlcSatisfiesPolicy method in the link.
This method should return a non-nil error if the link can carry the HTLC
as it satisfies its current forwarding policy. We'll use this method now
at *forwarding* time to ensure that we only forward to links that
actually accept the policy. This fixes a number of bugs that existed
before that could result in a link accepting an HTLC that actually
violated its policy. In the case that the policy is violated for *all*
links, we take care to return the error returned by the *target* link so
the caller can update their sending accordingly.

In this commit, we also remove the prior linkControl channel in the
channelLink. Instead, of sending a message to update the internal link
policy, we'll use a mutex in place. This simplifies the code, and also
adds some necessary refactoring in anticipation of the next follow up
commit.
2018-04-06 14:52:00 -07:00
Olaoluwa Osuntokun
b3bc374ba1
htlcswitch: send a direct Error if we get a known channel error on validate commit 2018-04-04 17:41:47 -07:00
Olaoluwa Osuntokun
0dbd325fd0
htlcswitch: synchronously send the error to the peer on commitment verify fail
In this commit, we fix a slight bug in lnd. Before this commit, we would
send the error to the remote peer, but in an async manner. As a result,
it was possible for the connections to be closed _before_ the error
actually reached the remote party. The fix is simple: wait for the error
to be returned when sending the message. This ensures that the error
reaches the remote party before we kill the connection.
2018-04-04 17:38:35 -07:00
Olaoluwa Osuntokun
5984cbd4ff
htlcswitch: allow overpaying for incoming payments
In this commit, we relax the constraints on accepting an exit hop
payment a bit. We'll now accept any incoming payment that _at least_
pays the invoice amount. This puts us further inline with the
specification, which recommends that nodes accept overpayment by a
certain margin.

Fixes #1002.
2018-04-02 15:58:56 -07:00
Conner Fromknecht
d13a566284
htlcswitch/link: DecodeOnionObfuscator -> ExtractErrorEncrypter 2018-03-13 16:33:28 -07:00
Olaoluwa Osuntokun
8988a07bce
htlcswitch: eliminate unnecessary indentation in processRemoteAdds
In this commit, we remove a ton of unnecessary indentation in the
processRemoteAdds method. Before this commit, we had a switch statement
on the type of the entry. This was required before when the method was
generic, but now since we already know that it’s an Add, we no longer
require such a statement.
2018-03-12 18:58:46 -07:00
Olaoluwa Osuntokun
069311c47f
htlcswitch: log dangling circuits in unable to create new commitment 2018-03-12 18:58:45 -07:00
Olaoluwa Osuntokun
bdd01cccb2
htlcswitch: remove getBandwidthCmd as it's no longer needed 2018-03-12 18:58:45 -07:00
Olaoluwa Osuntokun
1af8fa9367
htlcswitch: add additional comments and logging 2018-03-12 18:58:44 -07:00
Olaoluwa Osuntokun
c285bb5814 htlcswitch+peer: remove DecodeHopIterator from ChannelLinkConfig
In this commit, we remove the DecodeHopIterator method from the
ChannelLinkConfig struct. We do this as we no longer use this method,
since we only ever use the DecodeHopIterators method now.
2018-03-12 18:58:08 -07:00
Johan T. Halseth
33762e0f81
htlcswitch/link: fail channel on lnwire.Error 2018-03-11 17:21:23 +01:00
Conner Fromknecht
101ad09e9f
htlcswitch/link: batches processing of locked in htlcs 2018-03-09 21:08:43 -08:00
Conner Fromknecht
1fe7c6d431
htlcswitch/link: integrate persistence changes to lnwallet APIs 2018-03-09 17:35:53 -08:00
Olaoluwa Osuntokun
649be5ee0b
Merge pull request #775 from cfromknecht/sphinx-replay
Switch Persistence [1/4]: Infra for Sphinx Batched Decoding and Replay Protection
2018-03-08 23:03:01 -05:00
Conner Fromknecht
27df8d8ad1
htlcswitch/link: extract error encrypter from hop iterator 2018-03-08 21:12:04 -05:00
Olaoluwa Osuntokun
7031b5d217
htlcswitch: modify forwarding fee assertion to compare emperical fees
In this commit, we fix a bug that was uncovered by the recent change to
lnwire.MilliSatoshi. Rather than manually compute the diff in fees,
we’ll directly compare the fee that is given against the fee that we
expect.
2018-03-08 12:50:49 -05:00
Olaoluwa Osuntokun
473dfd115b
htlcswitch: add set of tests for the forwarding log 2018-03-06 13:56:11 -05:00
Olaoluwa Osuntokun
6f11fee1a4
htlcswitch: when forwarding htlcs, set the incomingHtlcAmt 2018-03-06 13:56:10 -05:00
Olaoluwa Osuntokun
d377ffafdd
htlcswitch: populate the incoming+outgoing in the payment circuit 2018-03-06 13:56:10 -05:00
Johan T. Halseth
80277c0517
htlcswitch: use fee rate types instead of btcutil.Amount for fee rates 2018-02-26 22:42:25 +01:00
Johan T. Halseth
e6f7a46d90
htlcswitch: don't return negative value from Bandwidth()
This commits prevents the Bandwith() method from returning
a negative value if the channel reserve is larger than
the actual available balance.
2018-02-08 18:35:24 -05:00
nsa
7e84892c21
htlcswitch: account for channel reserve in Bandwidth 2018-02-08 18:35:23 -05:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Olaoluwa Osuntokun
18741831dd
Merge pull request #485 from halseth/fix-negative-balance
Use remoteACKed index when calculating availableBalance.
2018-02-05 16:23:17 -08:00
Olaoluwa Osuntokun
30dbbd69a0
funding+htlcswitch: dynamically update short chan id of existing link
In this commit, we fix an existing bug that would result in some
payments getting “stuck”. This would happen if one side restarted
before the channel was fully locked in. In this case, since upon
re-connection, the link will get added to the switch with a *short
channel ID of zero*. If A then tries to make a multi-hop payment
through B, B will fail to forward the payment, as it’ll mistakenly
think that the payment originated from a local-subsystem as the channel
ID is zero. A short channel ID of zero is used to map local payments
back to their caller.

With fix this by allowing the funding manager to dynamically update the
short channel ID of a link after it discovers the short channel ID.

In this commit, we fix a second instance of reported “stuck” payments
by users.
2018-02-03 18:14:15 -08:00
Johan T. Halseth
9b7b3fa3b6
channellink: make BatchTicker and BatchSize configurable
This commit introduces a new Ticker interface, that can be used
to control when the batch timer should tick. This is done to be
able to more easily control the ticker during tests. The batch
timer is wrapped in the new BatchTicker struct, and made part
of the config together with BatchSize.
2018-02-02 21:16:36 -05:00
Wilmer Paulino
f0d6d31ca4
htlcswitch: allow sending htlcs when paying invoices with a zero amount 2018-01-27 19:05:23 -05:00
Olaoluwa Osuntokun
f8adab1f1c
test: add comprehensive integration tests for on-chain HTLC handling
In this commit, we add 6 new integration tests to test the various
actions that may need to be performed when either side goes on-chain to
fully resolve HTLC’s. Many of the tests are mirrors of each other as
they test sweeping/resolving HTLC’s from both commitment transactions.
2018-01-22 19:20:02 -08:00
Olaoluwa Osuntokun
96fbc7da84
htlcswitch: fix deadlock during chainWatcher notifications 2018-01-22 19:19:59 -08:00
Olaoluwa Osuntokun
239416f242
htlcswitch: update to use new event stream from the chainWatcher 2018-01-22 19:19:51 -08:00
Olaoluwa Osuntokun
703057c821
htlcswitch: with debughtlc+hodlhtlc mode, skip all HTLC level checks 2018-01-22 19:19:41 -08:00
Olaoluwa Osuntokun
dbe76a1507
htlcswitch: upon restart, examine all active HTLC's, settle those that we can
In this commit, we address a lingering TODO: before this if we had a
set of HTLC’s that we knew the pre-image to on our commitment
transaction after a restart, then we wouldn’t attempt to settle them.
With this new change, we’ll check that we didn’t already retransmit the
settles for them, and check the preimage cache to see if we already
know the preimage. If we do, then we’ll immediately settle them.
2018-01-22 19:19:40 -08:00
Olaoluwa Osuntokun
ca4eb970ec
htlcswitch: move channel re-sync into distinct function 2018-01-22 19:19:40 -08:00
Olaoluwa Osuntokun
2d133acaeb
htlcswitch: after each new state update, notify callers to set of new HTLC's 2018-01-22 19:19:39 -08:00
Olaoluwa Osuntokun
1418d672f9
htlcswitch: notify the ChainArbitrator of fresh signals upon link creation 2018-01-22 19:19:39 -08:00
Olaoluwa Osuntokun
f2642a70db
htlcswitch: once we discover a pre-image, add it to the witness cache
In this commit, we add some additional logic to the case when we
receive a pre-image from an upstream peer. We’ll immediately add it to
the witness cache, as an incoming HTLC might be waiting on-chain to
fully resolve the HTLC with knowledge of the newly discovered
pre-image.
2018-01-22 19:19:39 -08:00
Johan T. Halseth
9bdb483757
htlcswitch/link: make MinHTLC non-changable
This commit specifies that the MinHTLC value for a link is static
over the lifetime of a channel, and don't process the field
during a policyUpdate.
2018-01-12 22:56:29 +01:00
Olaoluwa Osuntokun
912366ada5
htlcswitch: fix notifier goroutine leak by cancelling epoch when htlcManager exits
Before this commit, if the htlcManager unexpectedly exited (due to a
protocol error, etc), the underlying block epoch notification intent
that was created for it would never be cancelled. This would result in
tens, or hundreds of goroutine leaks as the client would never consume
those notifications.

To fix this, we move cancellation of the block epoch intent from the
Stop() method of the channel link, to the defer statement at the top of
the htlcManager.
2018-01-08 19:50:24 -08:00
Olaoluwa Osuntokun
dbf6a511fc
htlcswitch: if we detect an InvalidCommitSigError, send over detailed error
In this commit, we add an additional case when handling a failed
commitment signature. If we detect that it’s a InvalidCommitSigError,
then we’ll send over an lnwire.Error message with the full details. We
don’t yet properly dispatch this error on the reciting side, but that
will be done in a follow up a commit.
2018-01-08 19:50:23 -08:00
Olaoluwa Osuntokun
e2fe4c2955
htlcswitch: reject duplicate payments to same invoice
In this commit, we modify the way the link handles HTLC’s that it
detects is destined for itself. Before this commit if a payment hash
came across for an invoice we’d already settled, then we’d gladly
accept the payment _again_. As we’d like to enforce the norm that an
invoice is NEVER to be used twice, this commit modifies that behavior
to instead reject an incoming payment that attempts to re-use an
invoice.

Fixes #560.
2018-01-04 14:23:37 -06:00
Jim Posen
88dc73adb0 htlcswitch: Fix failure error handling on outgoing adds. 2017-12-14 17:53:58 -08:00
Jim Posen
6ea533275c htlcswitch: Remove obsolete fields from htlcPacket. 2017-12-14 17:53:58 -08:00
Jim Posen
40fb0ddcfc htlcswitch: Assign each pending payment a unique ID.
This simplifies the pending payment handling code because it allows it
be handled in nearly the same way as forwarded HTLCs by treating an
empty channel ID as local dispatch.
2017-12-14 17:53:58 -08:00
Jim Posen
4a29fbdab2 htlcswitch: Rename htlcPacket fields for clarity.
The src/dest terminology for routing packets is kind of confusing
because the source HTLC may not be the source of the packet for
settles/fails traversing the circuit in the opposite direction. This
changes the nomenclature to incoming/outgoing and always references
the HTLCs themselves.
2017-12-14 17:53:58 -08:00
Jim Posen
317b44e220 lnwallet: Change channel update methods to accept HTLC ID.
Previously, some methods on a LightningChannel like SettleHTLC and
FailHTLC would identify HTLCs by payment hash. This would not always
work correctly if there are multiple HTLCs with the same payment hash,
so instead we change these methods to identify HTLCs by their unique
identifiers instead.
2017-12-14 17:53:58 -08:00
Jim Posen
1328e61c00 htlcswitch: Change circuit map keys to (channel ID, HTLC ID).
This changes the circuit map internals and API to reference circuits
by a primary key of (channel ID, HTLC ID) instead of paymnet
hash. This is because each circuit has a unique offered HTLC, but
there may be multiple circuits for a payment hash with different
source or destination channels.
2017-12-14 17:53:58 -08:00
Jim Posen
bc8d674958 htlcswitch: Remove constructor functions for htlcPacket.
The constructor functions have no additional logic other than passing
function parameters into struct fields. Given the large function
signatures, it is more clear to directly construct the htlcPacket in
client code than call a function with lots of positional arguments.
2017-12-14 17:53:58 -08:00
Olaoluwa Osuntokun
4cca23264d
htlcswitch: add new default case when handling UpdateFailMalformedHLTC
In this commit, we modify the existing logic to handle
UpdateFailMalformedHLTC message from an incoming peer. Rather than fail
the Chanel if they give us an invalid failure code, we’ll instead treat
it as a temporary channel failure so we can continue to forward the
error.
2017-12-12 11:42:47 -08:00
Olaoluwa Osuntokun
c3d345b575
htlcswitch: don't add UpdateFee to channel if not able to forward
This commit is a follow up to a prior commit which skipped sending the
commitment sig message (and sending out the update fee) message if the
channel wasn’t yet able to forward any HTLC’s. We’ll modify the prior
commit to not add the fee update to the channel at all. Otherwise, we
risk a state desynchronization.
2017-12-10 16:19:21 -08:00
Ben Congdon
720a8c7e96 htlcswitch: Only send UpdateFee message when channel is eligible
This commit adds a check to `updateChannelFee` which skipssending the
`update_fee` message when the channel is not eligable for forwarding
messages (likely due to the channel's `RemoteNextRevocation` not yet
being set).

This addresses #470.
2017-12-10 10:46:30 -08:00
Olaoluwa Osuntokun
669c2ee1a0
htlcswitch: only re-send FundingLocked if the channel is fully confirmed 2017-12-06 16:43:02 -08:00
Olaoluwa Osuntokun
36956d390f
htlcswitch: add new method to the ChannelLink interface, EligibleToForward
In this commit, we add a new method to the ChanneLink interface:
EligibleToForward. This method allows a link to be added to the switch,
but in an intermediate state which indicates that it isn’t yet ready to
forward any incoming HTLC’s.
2017-12-06 16:42:57 -08:00
Olaoluwa Osuntokun
260ff8831a
htlcswitch: update UpdateFee usage due to recent API change 2017-11-30 22:17:56 -08:00
Olaoluwa Osuntokun
62473009b5
htlcswitch: within link, with each new block, check to see if commit fee should change
In this commit we add a new case to the main select statement within a
channel link. This select statement will serve as a Sipping Bird which
will check the network fee rate (as returned by the fee estimator) and
compare that to the fee on the commitment transaction. Using the
shouldAdjustCommitFee function, we determine if we should update the
commitment fee. If so, then we’ll send an UpdateFee message and also
trigger a new commitment update.

We also add a new unit test: TestChannelLinkUpdateCommitFee to ensure
that we update the fee accordingly if the fee increases or decreases by
a large portion.
2017-11-23 23:10:19 -06:00
Olaoluwa Osuntokun
c560200ba1
htlcswitch: add new shouldAdjustCommitFee helper function
In this commit, we add a new helper function to the link which will be
utilized in a later commit. This helper function will help us determine
if we should update the commitment fee, in response to a change in the
network fee return by our fee estimators.
2017-11-23 23:10:19 -06:00
Olaoluwa Osuntokun
25082f0b5b
htlcswitch: update WipeChannel on Peer interface to simply take the chanPoint
The WipeChannel method doesn’t need to take the channel itself, as any
relevant indexes should be able to be queried based on the channel
point along.
2017-11-23 23:10:10 -06:00
Olaoluwa Osuntokun
6afebfba5d
htlcswitch: update link to match latest ChanSyncMsg API change 2017-11-16 20:00:06 -08:00
Olaoluwa Osuntokun
632f230fef
htlcswitch: add quit case to initial channel state sync select in channelLink
In this commit we add a quit case to the select statement that’s
entered once a link is created. Before this commit, upon restart it
would be possible that the deamon would never ben able to shutdown as
the link would be waiting for the messages to be sent by the other
side.
2017-11-10 19:51:13 -08:00
Olaoluwa Osuntokun
a48ceac98f
htlcswitch: update link to adhere to new channeldb API's 2017-11-10 19:51:03 -08:00
Olaoluwa Osuntokun
ea334e4d47
htlcswitch: re-write channel connection re-establishment for correctness
In this commit, we’ve re-written the process of syncing the state of
channels after we reconnect. This re-write ensure correctness, and also
simplified the existing logic which would attempt to launch another
goroutine to handle requests from the switch to ensure that it doesn’t
block. This is no longer necessary as the AddPacket method that the
switch indirectly calls is non-blocking.
2017-11-10 19:51:03 -08:00
Olaoluwa Osuntokun
de3af9b0c0
htlcswitch: modify Bandwidth() method on links to use more accurate accoutning
In this commit, we modify the existing implementation of the
Bandwidth() method on the default ChannelLink implementation to use
much tighter accounting. Before this commit, there was a bug wherein if
the link restarted with pending un-settled HTLC’s, and one of them was
settled, then the bandwidth wouldn’t properly be updated to reflect
this fact.

To fix this, we’ve done away with the manual accounting and instead
grab the current balances from two sources: the set of active HTLC’s
within the overflow queue, and the report from the link itself which
includes the pending HTLC’s and factors in the amount we’d need to (or
not need to) pay in fees for each HTLC.
2017-11-10 19:51:02 -08:00
Olaoluwa Osuntokun
70ed50738a
htlcswitch: utilize memoryMailBox within link, no longer spawn goroutine to forward in switch
In this commit, we’ve modified the link and the switch to start to use
the new mailBox in place of the existing synchronous message send
directly into the link’s upstream/downstream channels. With his change,
we no longer need to spawn a new goroutine each time an HTLC needs to
be forwarded, or a user payment is initiated.
2017-11-10 19:51:02 -08:00
Andrey Samokhvalov
9247168c5d not finished index persistence 2017-11-09 16:38:58 -08:00
Andrey Samokhvalov
a10ed36e8f htlcswitch+lnwallet: add malformed payment descriptor 2017-11-09 16:38:58 -08:00
Andrey Samokhvalov
e29193d550 htlcswitch+channel: remove cancel reasons from channel link 2017-11-09 16:38:58 -08:00
Andrey Samokhvalov
1b4e723a5d htlcswicth+channel: switch to store onion blobs in payment descriptor
After addition of the retransmission logic in the channel link, we
should make the onion blobs persistant, the proper way to do this is
include the onion blobs in the payment descriptor rather than storing
them in the distinct struct in the channel link.
2017-11-09 16:38:57 -08:00
Andrey Samokhvalov
d70ffe93e4 htlcswitch+channel: add channel states synchronization
In this commit BOLT№2 retranmission logic for the channel link have
been added. Now if channel link have been initialised with the
'SyncState' field than it will send the lnwire.ChannelReestablish
message and will be waiting for receiving the same message from remote
side. Exchange of this message allow both sides understand which
updates they should exchange with each other in order sync their
states.
2017-11-09 16:38:57 -08:00
Andrey Samokhvalov
bea9c0b52b htlcswitch: make stop of the link not in the goroutine
In order to be able to properly restart switch several times we should
have the sequential process of channel link stop. In other words if we
stopped the switch we should be sure that all channel links have been
stopped too. Addition of the goroutine during the force close was added
because of the deadlock:

Trace:
1. link:force_close_notification
2. link:wipe_channel
3. peer:switch_remove_link
4. switch:stop_link
5. link:wait <-- deadlock
2017-11-09 16:38:57 -08:00
Jim Posen
2b58a39d30 lnwallet: Simplify updateLog struct by removing redundant pointers.
The updateLog struct contains pointers that refer to the state of the
commitment chains. Instead, query the commitments directly.
2017-10-25 13:11:46 -07:00
Olaoluwa Osuntokun
e02af3f877
htlcswitch: as exit node check for invoice and HTLC value match after existence 2017-10-22 18:37:00 -07:00
Olaoluwa Osuntokun
74165ca8c1
htlcswitch: update l.clearedOnionBlobs in link to use new HtlcIndex 2017-10-22 18:36:57 -07:00
Olaoluwa Osuntokun
6a255fb588
htlcswitch: relax timelock verification in middle link to allow for shadow routes
In this commit, we relax the time lock verification when we realize
we’re an intermediate hop. We no longer directly assert that the time
lock we receive is _identical_, instead we allow slow slack and will
reject iff, the incoming timelock minus the outgoing time lock doesn’t
meet our delta requirements.
2017-10-22 18:36:56 -07:00
Olaoluwa Osuntokun
12ae63101d
Htlcswitch: rename Deobfuscator and Obfuscator interfaces
This commit renames the Deobfuscator interface to ErrorDecrypter and
the Obfuscator interface to ErrorEncrypter. With this rename, the
purpose of these two interfaces are a bit clearer.

Additionally, DecryptError (which was formerly Deobfuscate) now
directly returns an ForwardingError type instead of the
lnwire.FailureMessage.
2017-10-10 22:19:19 -07:00
Olaoluwa Osuntokun
ebd2dfbfd9
htlcswitch: use Tracef rather than Debugf for log examining HTLC's 2017-10-04 20:46:04 -07:00
Olaoluwa Osuntokun
710c2f5dac
htlcswitch: if unable to add half in channel link, properly increment bandwidth
This commit fixes an existing bug, wherein if we failed to account for
the fact that if we we’re unable to add an HTLC for any reason other
than an overflown commitment transaction, then we wouldn’t properly
re-add the available bandwidth of the offending HTLC.
2017-10-02 22:14:15 -07:00
Johan T. Halseth
5d03256baf
htlcswith/link: resend fundingLocked from channelLink when numUpdates == 0.
In the case where the channelLink get started and the number of
updates on this channel is zero, this means no paymenys has been
done using this channel. This might mean that the fundingLocked
never was sent successfully, so we resend to make sure this
channel gets opened correctly.
2017-10-02 13:29:50 +02:00
Olaoluwa Osuntokun
7ae436e30e
htlcswitch+test: send switch back error on lnwallet.ErrInsufficientBalance
This commit fixes a bug related to swallowing an error that should go
to the switch in the case of an insufficient balance error when
attempting to add a new HTLC to the channel state machine. In this
case, an error would never be returned back to the client/switch, and
the internal processing within the channelLink would loop forever,
attempting to add an HTLC that can’t be added due to insufficient
balance to state machine itself.

We fix this issue by only treating the lnwallet.ErrMaxHTLCNumber as the
only error that prompts adding an HTLC to the overflow queue rather
than sending the error directly back to the switch.
2017-09-25 16:10:20 -07:00
Olaoluwa Osuntokun
be5b2d46a5
htlcswitch: ensure the packetQueue can handle total+partial commitment overflows
In this commit, we’ve moved away from the internal queryHandler within
the packetQueue entirely. We now use an internal queueLen variable
internally to allow callers to sample the queue’s size, and also for
synchronization purposes internally.

This commit also introduces a chan struct{} (freeSlots) that is used
internally as a semaphore. The current value of freeSlots reflects the
number of available slots within the commitment transaction. Within the
link, after an HTLC has been removed/modified, then a “slot” is freed
up. The main packetConsumer then interprets these messages as a signal
to attempt to free up a new slot within the queue itself by dumping off
to the commitment transaction.
2017-09-25 12:47:34 -07:00