Commit Graph

414 Commits

Author SHA1 Message Date
Conner Fromknecht
adf6b8619f
peer: dispatch gossip sync in peer start
This commit moves the gossip sync dispatch
such that it is more tightly coupled to the
life cycle of the peer. In testing, I noticed
that the gossip syncer needs to be dispatched
before the first gossip messages come across
the wire.

The prior spawn location in the server happens
after starting all of the peer's goroutines,
which could permit an ordering where the
gossip syncer has not yet been registered.
The new location registers the gossip syncer
within the read handler such that the call is
blocks before any messages are read.
2018-09-04 17:28:50 -07:00
Olaoluwa Osuntokun
6aebd053a3
Merge pull request #1823 from cfromknecht/dont-dc-on-link-fail
peer: ensure link failures are processed in peer life cycle
2018-09-03 19:56:19 -07:00
Olaoluwa Osuntokun
edf304ad8b
peer: ensure we unlock the msgCond during peer msgConsumer exit 2018-09-03 17:03:05 -07:00
Conner Fromknecht
48dc38d9f9
peer: ensure link failures are processed in peer life cycle 2018-08-30 17:36:13 -07:00
Olaoluwa Osuntokun
28a59362d6
peer: ensure readHandler doesn't block on AddMsg to msgStream
In this commit, we add a quit channel to the AddMsg method of the
msgStream struct. Before this commit, if the queue was full, the
readHandler would block and be unable to exit. We remedy this by
leveraging the existing quit channel of the peer as an additional select
case within the AddMsg method.
2018-08-26 20:02:50 -07:00
Olaoluwa Osuntokun
f2db18733b
peer: before and after obtaining link for chan update, check quit signal 2018-08-25 17:30:17 -07:00
Olaoluwa Osuntokun
7f480f723c
peer: add QuitSignal to ensure peer struct adheres to lnpeer.Peer interface 2018-08-25 17:30:14 -07:00
Olaoluwa Osuntokun
0e510c8b5c
funding+peer: don't attempt to deliver messages if the peer is shutting down 2018-08-25 17:30:11 -07:00
Olaoluwa Osuntokun
d6f534cfa5
peer: don't attempt to re-enable any private channels 2018-08-25 17:30:09 -07:00
Olaoluwa Osuntokun
5130949604
peer: allow msgConsumers to also exit on peer quit send 2018-08-25 17:30:07 -07:00
Olaoluwa Osuntokun
33c5c9661e
peer: allow msgStream goroutines to quit within the apply function
In this commit, we thread through the quit of the peer to the execution
of the apply function for a msgStream. This change ensures that if the
target is still processing the message, then the peer is able to exit
cleanly and not block insensately.
2018-08-25 17:30:05 -07:00
Olaoluwa Osuntokun
e4e4a6ab58
peer: move atomic var increment in msgConsumer goroutine to defer
In this commit we move the atomic var increment that signals the
consumer goourtine has exited to the top of the method in a defer
statement. This cleans up some duplicate code and also adheres to the
pattern of using defers to signal cleaning up any dependent goroutine
state on exit.
2018-08-25 17:30:02 -07:00
Olaoluwa Osuntokun
a7656454aa
peer: stop chanMsg streams in defer right after creation 2018-08-25 17:29:59 -07:00
Olaoluwa Osuntokun
ce115a6a59 peer: raise readHandler wait group done to defer statement
In this commit, we raise the readHandler wait group done into a defer
statement at the top of the method. This fixes an existing but that
would cause the readHandler to declare it had exited, yet possibly still
be waiting on the chan message stream below to exit.
2018-08-24 18:53:28 -07:00
Johan T. Halseth
e9066c2d34
peer: print warning if selfPolicy not found 2018-08-23 07:50:18 +02:00
Johan T. Halseth
19e3a194fa
peer+server: make fetchLastChanUpdate _always_ fetch our own update
This commit fixes a bug that would cause us to fetch our peer's
ChannelUpdate in some cases, where we really wanted to fetch our own.

The reason this happened was that we passed the peer's pubkey to
fetchLastChanUpdate, making us match on their policy. This would lead to
ChannelUpdates being sent during routing which would have no effect on
the attempted path.

We fix this by always use our own pubkey in fetchLastChanUpdate, and
also uses the common methods within the server to be able to extract the
update even when only one policy is known.
2018-08-23 07:50:18 +02:00
Johan T. Halseth
de5e9e139c
server: make extractChannelUpdate extract from set of potential policies 2018-08-23 07:50:17 +02:00
Johan T. Halseth
229fd88289
peer: use custom MinHTLC value at initial link add
This commit fixes a bug within the peer, where we would always use the
default forwarding policy when adding new links to the switch. Mostly
this wasn't a problem, as we most often are using default values for new
channels, but the min_htlc value is a value that is set by the remote,
not us.

If the remote specified a custom min_htlc during channel creation, we
would still use our DefaultMinHtlc value when first adding the link,
making us try to forward HTLCs that would be rejected by the remote.

We fix this by getting the required min_htlc value from the channel
state machine, and setting this for the link's forwarding policy.

Note that on restarts we will query the database for our latest
ChannelEdgePolicy, and use that to craft the forwardingPolicy. This
means that the value will be set correctly if the policy is found in the
database.
2018-08-23 07:50:17 +02:00
Johan T. Halseth
5deffd228c
peer: call disableChannel with disabled=false after loading channels
This to ensure now active channel is available in the router, for path
finding, as it might have been disabled if the peer has been offline a
while.
2018-08-17 23:24:13 +02:00
Johan T. Halseth
b5bfdd72b5
server+peer: rename disableChannel->announceChanStatus
Now takes a boolean whether to disable/activate, and keeps track of the
last update sent to avoid sending duplicates.
2018-08-17 23:24:12 +02:00
Conner Fromknecht
d4d90979ef
peer: increase peer write timeout to 50 seconds
Sometimes when performing an initial sync, the remote
node isn't able to pull messages off the wire because
of long running tasks and queues are saturated. With
a shorter write timeout, we will give up trying to send
messages and teardown the connection, even though the
peer is still active.
2018-08-13 21:55:32 -07:00
Conner Fromknecht
a1abb11dc5
peer: add ready chan arg to WaitForDisconnect
This commit adds additional synchronization logic to
WaitForDisconnect, such that it can be spawned before
Start has been executed by the server. Without
modification, the current version will return
immediately since no goroutines will have been
spawned.

To solve this, we modify WaitForDisconnect to block until:
 1) the peer is disconnected,
 2) the peer is successfully started,
before watching the waitgroup.

In the first case, the waitgroup will block until all
(if any) spawned goroutines have exited. Otherwise, if
the Start is successful, we can switch to watching the
waitgroup, knowing that waitgroup counter is positive.
2018-08-13 21:52:32 -07:00
Olaoluwa Osuntokun
7a113d469b
Merge pull request #1551 from cfromknecht/switch-revert-replace-link
[htlcswitch]: revert replace link, ensure removed links are stopped
2018-08-13 21:44:42 -07:00
Johan T. Halseth
64c2c6b118
peer: print ChanStatus return value, not address 2018-08-11 12:51:50 +02:00
Conner Fromknecht
5f90973f76
peer: always purge link before adding new one 2018-08-10 11:42:25 -07:00
Conner Fromknecht
1113684dc3
Revert "htlcswitch: in event of duplicate link add, prefer newer link"
This reverts commit e60d2b774a35e446081f9be2d4901925cac05379.
2018-08-10 11:42:20 -07:00
Olaoluwa Osuntokun
d3b1b9aa98
Merge pull request #1668 from cfromknecht/interface-tickers
Ticker Package
2018-08-09 20:55:25 -07:00
Wilmer Paulino
9d2eeb6304
multi: update to latest fee estimation interface 2018-08-09 17:29:52 -07:00
Conner Fromknecht
2762546eeb
peer: replace NewBatchTicker with ticker.New 2018-08-09 02:48:07 -07:00
Conner Fromknecht
60edca164c
peer: adds StartTime() used to compute backoff relaxation 2018-08-07 14:50:07 -07:00
Olaoluwa Osuntokun
07defe5f93
rpc+peer: use pkScripts for close ntfns 2018-07-31 21:28:52 -07:00
Olaoluwa Osuntokun
1e39cfc65f
Merge pull request #1364 from halseth/data-loss-protect
Data loss protection
2018-07-31 20:53:42 -07:00
Johan T. Halseth
ea6aca26a5
channeldb: make chanStatus unexported
Since the ChanStatus field can be changed from concurrent callers, we
make it unexported and add the method ChanStatus() for safe retrieval.
2018-07-31 15:07:30 +02:00
Conner Fromknecht
0efe5ca49d
peer: only pass duration to htlcswitch.NewBatchTicker 2018-07-30 22:33:37 -07:00
Olaoluwa Osuntokun
e0baa49690
Merge pull request #1387 from wpaulino/send-disable-chan-update
multi: send a channel update with disabled flag set on channel close
2018-07-23 17:46:37 -07:00
Olaoluwa Osuntokun
bca926d6af
Merge pull request #1371 from wpaulino/prune-link-nodes
server: prune link nodes without any open channels
2018-07-21 18:55:38 -07:00
Wilmer Paulino
9cedef9245
fundingmanager: send messages to peers directly
In this commit, we modify the existing message sending functionality
within the fundingmanager. Due to each mesage send requiring to hold the
server's lock to retrieve the peer, we might run into a case where the
lock is held for a larger than usual amount of time and would therefore
block on sending the message within the fundingmanager. We remedy this
by taking a similar approach to some recent changes within the gossiper.
We now keep track of each peer within the internal fundingmanager
messages and send messages directly to them.
2018-07-19 12:34:11 -07:00
Wilmer Paulino
6504a9cfa8
fundingmanager+peer: modify fundingErrorMsg to use peer key 2018-07-19 12:32:31 -07:00
Wilmer Paulino
3ab17063ff
multi: satisfy new lnpeer interface 2018-07-19 12:32:29 -07:00
Wilmer Paulino
38b52df51f
peer+server: remove persistent connections for peers with no open channels remaining 2018-07-17 17:35:30 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Wilmer Paulino
873cccc7a6
multi: send channel update with disabled active on force and coop chan closes 2018-07-11 17:07:03 -07:00
Yaacov Akiba Slama
17223c1215 peer: add write timeout within writeMessage
In this commit, we add a timeout within the writeMessage method when we go to write to the socket. We do this as otherwise, if the other peer is blocked for some reason, we'll never actually unblock ourselves, which may cause issues in other sub-systems waiting on this write call. For now, we use a value of 10 seconds, and will adjust in the future if we deem this time period too short.
2018-06-26 17:27:22 -07:00
Wilmer Paulino
b1ba83bf2b
peer: prevent processing close msg if channel is not found 2018-06-25 13:13:12 -07:00
Johan T. Halseth
55c8741e42
peer: don't stop nil channel 2018-06-19 12:48:11 +01:00
Wilmer Paulino
90a50bd893
peer: remove no longer needed block epoch 2018-06-13 19:23:44 -07:00
Wilmer Paulino
8198466972
multi: move block epochs dependency from links to switch
In this commit, we move the block height dependency from the links in
the switch to the switch itself. This is possible due to a recent change
on the links no longer depending on the block height to update their
commitment fees.

We'll now only have the switch be alerted of new blocks coming in and
links will retrieve the height from it atomically.
2018-06-13 17:41:21 -07:00
Wilmer Paulino
4cc60493d2
peer+htlcswitch: randomize link commitment fee updates
In this commit, we modify the behavior of links updating their
commitment fees. Rather than attempting to update the commitment fee for
each link every time a new block comes in, we'll use a timer with a
random interval between 10 and 60 minutes for each link to determine
when to update their corresponding commitment fee. This prevents us from
oscillating the fee rate for our various commitment transactions.
2018-06-13 17:41:01 -07:00
Olaoluwa Osuntokun
e60d2b774a
htlcswitch: in event of duplicate link add, prefer newer link 2018-06-12 00:44:30 -07:00
Olaoluwa Osuntokun
e1d8c37708
peer: only add an active link to the channelManager if addPeer succeeds
In this commit we fix an existing bug which could cause internal state
inconsistency between then switch, funding manager, and the peer. Before
this commit, we would _always_ add a new channel to the channelManager.
However, due to recent logic, it may be the case that this isn't the
channel that will ultimately reside in the link. As a result, we would
be unable to process incoming FundingLocked messages properly, as we
would mutate the incorrect channel in memory.

We remedy this by moving the inserting of the new channel into the
activeChannels map until the end of the loadActiveChannels method, where
we know that this will be the link that persists.
2018-06-12 00:44:26 -07:00
Conner Fromknecht
edf08458c1
peer: changes to satisfy lnpeer.Peer
This commit adds:
 - variadic SendMessage method (w/ sync bool reorder)
 - passes peer object directly to ProcessRemoteAnnouncment
 - adds IdentityKey() method for lnpeer.Peer
2018-06-08 13:47:57 -07:00
maurycy
3be08e69cf multi: 64bit aligment of atomic vars on arm/x86-32 2018-06-04 20:02:34 -07:00
Olaoluwa Osuntokun
210e28a483
peer: add messages summaries for the new gossip query messages 2018-05-31 16:30:56 -07:00
Olaoluwa Osuntokun
40bb19eb6e
peer: dispath new gossip query messages to the gossiper 2018-05-31 16:30:55 -07:00
Olaoluwa Osuntokun
bfcdbe2204 peer: when failing link, depend on server wg, not peer
In this commit, we fix a recently introduced bug. The issue is that
while we're failing the link, the peer we're attempting to force close
on may disconnect. As a result, if the peerTerminationWatcher exits
before we can add to the wait group (it's waiting on that), then we'll
run into a panic as we're attempting to increment the wait group while
another goroutine is calling wait.

The fix is to first check that the server isn't shutting down, and then
use the server's wait group rather than the peer to synchronize
goroutines.

Fixes #1285.
2018-05-25 20:36:40 -07:00
Johan T. Halseth
3b2fd32523
peer: populate OnChannelFailure in link config
This commit makes the peer aware of the LinkFailureErrors that can
happen during link operation, and making it start a goroutine to
properly remove the link and force close the channel.
2018-05-25 06:58:23 +02:00
Johan T. Halseth
4836a25c98
peer: move link creation into new method 2018-05-25 06:54:05 +02:00
Johan T. Halseth
bb611e065d
peer: don't pass closeCtx to chanCloser 2018-05-22 12:06:33 +02:00
Olaoluwa Osuntokun
f0050e7ffb
Merge pull request #1201 from lightningnetwork/peer-async-disconnect
server: Peer Async Disconnect w/ Scheduled peerConnected
2018-05-10 17:05:16 -07:00
Olaoluwa Osuntokun
b271ed5ffb
Merge pull request #1199 from cfromknecht/queue-msg-err-chans
peer/server: Remove Broadcast err chans
2018-05-10 16:55:57 -07:00
Conner Fromknecht
a2f7170ff0
peer: make Disconnect async, block on WaitForDisconnect 2018-05-08 16:37:14 -07:00
Conner Fromknecht
0691b21a30
peer: improves disconnect handling
This commit attempts to resolve some potential deadlock
scenarios during a peer disconnect.

Currently, writeMessage returns a nil error when disconnecting.
This should have minimal impact on the writeHanlder, as the
subsequent loop selects on the quit chan, and will cause it to
exit. However, if this happens when sending the init message,
the Start() method will attempt to proceed even though the peer
has been disconnected.

In addition, this commit changes the behavior of synchronous
write errors, by using a non-blocking select. Though unlikely,
this prevents any cases where multiple errors are returned, and
the errors are not being pulled from the other side of the errChan.
This removes any naked sends on the errChan from stalling the peer's
shutdown.
2018-05-08 16:35:49 -07:00
Olaoluwa Osuntokun
72f48b6abe
htlcswitch+server: ensure we always send an update w/ a TempChannelFailure
In this commit, we ensure that any time we send a TempChannelFailure
that's destined for a multi-hop source sender, then we'll always package
the latest channel update along with it.
2018-05-08 13:00:28 -04:00
Olaoluwa Osuntokun
d72f28839d
Merge pull request #1104 from halseth/chainwatcher-handoff-race
Fix chainwatcher handoff race
2018-05-03 17:18:31 -07:00
Olaoluwa Osuntokun
ecfde2e85f
Merge pull request #1149 from cfromknecht/trim-pending-htlc-index
Trim Open Circuits Using HTLC Index of Pending Commitments
2018-05-03 16:45:29 -07:00
Olaoluwa Osuntokun
5f059e74cb
peer: ensure msgConsumer sets the shutdown variable on exit
In this commit, we fix a bug that could at times cause a deadlock when a
peer is attempting to disconnect. The issue was that when a peer goes to
disconnect, it needs to stop any active msgStream instances. The Stop()
method of the msgStream would block until an atomic variable was set to
indicate that the stream had fully exited. However, in the case that we
disconnected lower in the msgConsumer loop, we would never set the
streamShutdown variable, meaning that msgStream.Stop() would never
unblock.

The fix for this is simple: set the streamShutdown variable within the
quit case of the second select statement in the msgConsumer goroutine.
2018-05-03 15:45:22 -07:00
Conner Fromknecht
701d37725c
peer: extract hodl mask, remove htlchodl mode 2018-05-02 00:18:51 -07:00
Johan T. Halseth
08f1a3689d
peer: don't pass bool to SubscribeChannelEvents 2018-05-02 08:43:32 +02:00
Johan T. Halseth
bd4e717971
peer: don't load channels that have had commitment broadcasted 2018-04-25 09:37:24 +02:00
practicalswift
663c396235 multi: fix a-vs-an typos 2018-04-17 19:02:04 -07:00
Olaoluwa Osuntokun
ffabb17ce6
peer: use new fetchLastChanUpdate method to populate the ChannelLinkConfig 2018-04-06 14:52:01 -07:00
Olaoluwa Osuntokun
7cbe78eeee
peer: re-use a static writeBuf within writeMessage optimize memory usage
In this commit, we might a very small change to the way writing messages
works in the peer, which should have large implications w.r.t reducing
memory usage amongst chatty nodes.

When profiling the heap on one of my nodes earlier, I noticed this
fragment:
```
Showing top 20 nodes out of 68
      flat  flat%   sum%        cum   cum%
         0     0%     0%    75.53MB 54.61%  main.(*peer).writeHandler
   75.53MB 54.61% 54.61%    75.53MB 54.61%  main.(*peer).writeMessage
```

Which points to an inefficiency with the way we handle allocations when
writing new messages, drilling down further we see:
```
(pprof) list writeMessage
Total: 138.31MB
ROUTINE ======================== main.(*peer).writeMessage in /root/go/src/github.com/lightningnetwork/lnd/peer.go
   75.53MB    75.53MB (flat, cum) 54.61% of Total
         .          .   1104:   p.logWireMessage(msg, false)
         .          .   1105:
         .          .   1106:   // As the Lightning wire protocol is fully message oriented, we only
         .          .   1107:   // allows one wire message per outer encapsulated crypto message. So
         .          .   1108:   // we'll create a temporary buffer to write the message directly to.
   75.53MB    75.53MB   1109:   var msgPayload [lnwire.MaxMessagePayload]byte
         .          .   1110:   b := bytes.NewBuffer(msgPayload[0:0:len(msgPayload)])
         .          .   1111:
         .          .   1112:   // With the temp buffer created and sliced properly (length zero, full
         .          .   1113:   // capacity), we'll now encode the message directly into this buffer.
         .          .   1114:   n, err := lnwire.WriteMessage(b, msg, 0)
(pprof) list writeHandler
Total: 138.31MB
ROUTINE ======================== main.(*peer).writeHandler in /root/go/src/github.com/lightningnetwork/lnd/peer.go
         0    75.53MB (flat, cum) 54.61% of Total
         .          .   1148:
         .          .   1149:                   // Write out the message to the socket, closing the
         .          .   1150:                   // 'sentChan' if it's non-nil, The 'sentChan' allows
         .          .   1151:                   // callers to optionally synchronize sends with the
         .          .   1152:                   // writeHandler.
         .    75.53MB   1153:                   err := p.writeMessage(outMsg.msg)
         .          .   1154:                   if outMsg.errChan != nil {
         .          .   1155:                           outMsg.errChan <- err
         .          .   1156:                   }
         .          .   1157:
         .          .   1158:                   if err != nil {
```

Ah hah! We create a _new_ buffer each time we want to write a message
out. This is unnecessary and _very_ wasteful (as seen by the profile).
The fix is simple: re-use a buffer unique to each peer when writing out
messages. Since we know what the max message size is, we just allocate
one of these 65KB buffers for each peer, and keep it around until the
peer is removed.
2018-04-06 12:55:17 -07:00
Olaoluwa Osuntokun
ca9174e166
peer: extend SendMessage to allow callers to block until msg is sent 2018-04-04 17:43:57 -07:00
Olaoluwa Osuntokun
447a031435
peer: reject remote closes with active HTLCs
In this commit, we follow up to the prior commit by ensuring we won't
accept a co-op close request for a chennel with active HTLCs. When
creating a chanCloser for the first time, we'll check the set of HTLC's
and reject a request (by sending a wire error) if the target channel
still as active HTLC's.
2018-03-30 13:06:57 -07:00
Olaoluwa Osuntokun
e7d66e1dfd
peer: don't d/c peer if we encounter lnwire.ErrUnknownAddrType
In this commit, we fix a minor deviation in our implementation from the
specification. Before if we encountered an unknown error type, we would
disconnect the peer. Instead, we’ll now just continue along parsing the
remainder of the messages. This was flared up recently by some
c-lightning related incompatibilities that emerged on main net.
2018-03-23 15:49:33 -07:00
Olaoluwa Osuntokun
fda3b871c1
peer: ensure we stop the channel if error happens in loadActiveChannels
In this commit, we fix a goroutine leak that could occur if while we
were loading an error occurred in any of the steps after we created the
channel object, but before it was actually loaded in to the script. If
an error occurs at any step, we ensure that we’ll stop toe channel.
Otherwise, the sigPool goroutines would still be lingering and never be
stopped.
2018-03-19 19:14:55 -07:00
Conner Fromknecht
c1f0c4ffda
peer: DecodeOnionObfuscator -> ExractErrorEncrypter 2018-03-13 16:33:29 -07:00
Johan T. Halseth
a6c2550404
peer: track failed channels
This commit adds a set used to track channels we consider failed. This
is done to ensure we don't end up in a connect/disconnect loop when we
attempt to re-sync the channel state of a failed channel with a peer.
2018-03-13 11:11:17 +01:00
Olaoluwa Osuntokun
53045450ad
Merge pull request #823 from Roasbeef/chan-stream-buf-limit
peer: modify the msgStream to not buffer messages off the wire indefi…
2018-03-12 19:39:48 -07:00
Olaoluwa Osuntokun
c285bb5814 htlcswitch+peer: remove DecodeHopIterator from ChannelLinkConfig
In this commit, we remove the DecodeHopIterator method from the
ChannelLinkConfig struct. We do this as we no longer use this method,
since we only ever use the DecodeHopIterators method now.
2018-03-12 18:58:08 -07:00
Olaoluwa Osuntokun
60c8257c3c
peer: modify the msgStream to not buffer messages off the wire indefinitely
In this commit, we modify the msgStream struct to ensure that it has a
cap at which it’ll continue to buffer messages. Currently we have two
msgStream structs per peer: the first for the discovery messages, and
the second for any messages that modify channel state. Due to
inefficiencies in the current protocol for reconciling graph state upon
connection (just dump the entire damn thing), when a node first starts
up, this can lead to very high memory usage as all peers will
concurrently send their initial message dump which can be in the
thousands of messages on testate.

Our fix is simple: make the message stream into a _bounded_ message
stream. The newMsgStream function now has a new argument: bufSize.
Internally, we’ll take this bufSize and create more or less an internal
semaphore for the producer. Each time the producer gets a new message,
it’ll try and read an item from the channel. If the queue still has
size, then this will succeed immediately. If not, then we’ll block
until the consumer actually finishes processing a message and then
signals by sending a new item into the channel.

We choose an initial value of 1000. This was chosen as there’s already
a max limit of outstanding adds on the commitment, and a value of 1000
should allow any incoming messages to be safely flushed and processed
by the gossiper.
2018-03-12 16:34:59 -07:00
Johan T. Halseth
80ef16e853
peer: hand lnwire.Error to fndgMngr or link depending on chanID 2018-03-11 17:21:23 +01:00
Conner Fromknecht
972d238f04
peer: remove Switch from channel link config 2018-03-09 21:18:15 -08:00
Conner Fromknecht
d468a36d69
peer: pass unsafe-replay to link config 2018-03-09 21:18:15 -08:00
Conner Fromknecht
8d0e3dc467
peer: adds FwdPkgGCTicker to channel configs 2018-03-09 21:18:14 -08:00
Conner Fromknecht
0e4be6a04a
peer: init link with batched sphinx processing 2018-03-09 21:18:14 -08:00
Johan T. Halseth
b9d1eceda3
peer: use EstimateFeePerVSize 2018-02-26 22:42:26 +01:00
MeshCollider
2c2ed3c6a9 multi: Unify use of NodeKey in log messages 2018-02-19 17:48:39 -08:00
MeshCollider
915c4201b9 multi: remove internal peer_id usage 2018-02-19 17:48:39 -08:00
practicalswift
b8e1351cf3 multi: fix some recently introduced typos 2018-02-18 15:27:29 -08:00
Olaoluwa Osuntokun
2e090ee2ab
peer: only return a channel snapshot if the channel can route
In this commit, we fix a slight miscalculation within the GetInfo call.
Before this commit, we would list any channel that the peer knew of as
active, instead of those which are, well, actually *active*. We fix
this by skipping any channels that we don’t have the remote revocation
for.
2018-02-08 19:40:54 -08:00
Olaoluwa Osuntokun
22951cb364
lnd: account for new lnwire.Sig API and channeldb API changes 2018-02-06 20:14:33 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Johan T. Halseth
26a80f86b8
peer: set BatchTicker and BatchSize in channellink config 2018-02-02 21:16:37 -05:00
Olaoluwa Osuntokun
0a4de859a2
discovery+routing: reduce number of active validation barrier jobs
In order to reduce high CPU utilization during the initial network view
sync, we slash down the total number of active in-flight jobs that can
be launched.
2018-01-28 14:55:32 -08:00
Olaoluwa Osuntokun
d4e650c85d
peer: the chancloser no longer needs to notify the breach arb of settled transactions 2018-01-22 19:19:59 -08:00
Olaoluwa Osuntokun
5df6704a9c
contractcourt: make synchronous chain watcher notifications optional
In this commit, we modify the way that notifications are dispatched
within the chainWatcher. Before we would *always* wait for an ack back
before we started to clean up he database state. This would at times
lead to deadlocks. To remedy this, we now allow callers to decide if
they want notifications to be sync or not. The only current caller that
requires this is the breach arbiter.
2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
3ec83cc82f
peer+contractcourt: delegate watching for co-op closes to the chainWatcher
In this commit, we modify the interaction between the chanCloser
sub-system and the chain notifier all together. This fixes a series of
bugs as before this commit, we wouldn’t be able to detect if the remote
party actually broadcasted *any* of the transactions that we signed off
upon. This would be rejected to the user by having a “zombie” channel
close that would never actually be resolved.

Rather than the chanCloser watching for on-chain closes, we’ll now open
up a co-op close context to the chainWatcher (via a layer of
indirection via the ChainArbitrator), and report to it all possible
closes that we’ve signed. The chainWatcher will then be able to launch
a goroutine to properly update the database state once any of the
possible closure transactions confirms.
2018-01-22 19:19:53 -08:00
Olaoluwa Osuntokun
69e6ec9954
peer+funding: remove unneeded channel handoff code with the breach arbiter
We no longer need to hand off new channels that come online as the
chainWatcher will be persistent, and always have an active signal for
the entire lifetime of the channel.
2018-01-22 19:19:50 -08:00
Olaoluwa Osuntokun
defa1bc3e3
peer: when creating new links, obtain an on-chain events subscription 2018-01-22 19:19:49 -08:00
Olaoluwa Osuntokun
24a16b4f49
lnd: properly initialize entities of new contractcourt package 2018-01-22 19:19:42 -08:00
Olaoluwa Osuntokun
b1fe0c12bf
peer: ensure that any active msgStreams properly exit upon peer D/C
In this commit, we modify the logic within the Stop() method for
msgStream to ensure that the main goroutine properly exits. It has been
observed on running nodes with tens of connections, that if a node is
very flappy, then the node can end up with hundreds of leaked
goroutines.

In order to fix this, we’ll continually signal the msgConsumer to wake
up after the quit channel has been closed. We do this until the
msgConsumer sets a bool indicating that it has exited atomically.
2018-01-08 19:50:22 -08:00
Conner Fromknecht
44805be8d9
peer: filter borked channels when loading active chans 2018-01-05 13:47:18 -08:00
Johan T. Halseth
25b77a0aee peer: add error chan to queueMsg 2017-12-19 13:01:59 -06:00
Matt Drollette
adf0d98194 multi: fix several typos in godoc comments 2017-12-17 18:40:05 -08:00
Olaoluwa Osuntokun
ecf58d64f7
peer: properly route UpdateFailMalformedHTLC messages to the switch
This commit adds an overlooked case into the main type switch statement
within the peer’s readHandler. Before this commit, we would fail to
process any UpdateFailMalformedHTLC messages, possibly leading to a
commitment desynchronization. To avoid this case, we’ll no properly
process the UpdateFailMalformedHTLC message by sending the message to
an active link registered to the switch.
2017-12-12 11:22:50 -08:00
Olaoluwa Osuntokun
ce6dee6ee4
peer: check LocalUnrevokedCommitPoint for nil-ness as it's optional
In this commit, we modify the logWireMessage function to ensure that we
don't attempt to nil out the LocalUnrevokedCommitPoint.Curve field
unless it's actually set. We need to do this as the field as actually
optional, and we may be reading a message from a node that doesn't
support the option.

Fixes #461.
2017-12-07 13:11:23 -08:00
Olaoluwa Osuntokun
4444ec39ea
funding: properly display our 1-byte error code messages 2017-12-06 18:43:58 -08:00
Olaoluwa Osuntokun
7960b5240f
peer: when processing a msg, skip he funding barrier if it's a ChanSync message
This commit is a follow up to the prior commit: as it’s possible for
the channel_reestablish message to be sent *before* the channel has
been fully confirmed, we’ll now ensure that we process it to the link
even if the channel isn’t yet open.
2017-12-06 16:43:00 -08:00
Olaoluwa Osuntokun
084d477ec3
peer: always load active channels upon connection reestablishment with peer
In this commit, we modify the logic within loadActiveChannels to
*always* load a channel, even if it isn’t yet fully confirmed. With
this change, we ensure that we’ll always send a channel_reestablish
message upon reconnection.

Fixes #458.
2017-12-06 16:43:00 -08:00
Olaoluwa Osuntokun
7b10f54216
peer: in logWireMessage also unset curve field for lnwire.ChannelReestablish
This will allow users to run in trace mode again, without having an
excessive amount of spam in their logs.
2017-12-06 16:43:00 -08:00
Olaoluwa Osuntokun
3bc248e01c
peer: properly process retransmitted FundingLocked message we've never processed
In this commit, we modify the logic within the channelManager to be
able to process any retransmitted FundingLocked messages. Before this
commit, we would simply ignore any new channels sent to us, iff, we
already had an active channel with the same channel point. With the
recent change to the loadActiveChannels method in the peer, this is now
incorrect.

When a peer retransmits the FundingLocked message, it goes through to
the fundingManager. The fundingMgr will then (if we haven’t already
processed it), send the channel to the breach arbiter and also to the
peer’s channelManager. In order to handle this case properly, if we
already have the channel, we’ll check if our current channel *doesn’t*
already have the RemoteNextRevocation field set. If it doesn’t, then
this means that we haven’t yet processed the FundingLcoked message, so
we’ll process it for the first time.

This new logic will properly:
  * ensure that the breachArbiter still has the most up to date channel
  * allow us to update the state of the link has been added to the
switch at this point
      * this link will now be eligible for forwarding after this
sequence
2017-12-06 16:42:59 -08:00
Olaoluwa Osuntokun
ddc5a0fc85
peer: unconditionally add a channel to the switch if it's open
In this commit we revert a prior change which was added after
FundingLocked retransmission was implemented. This prior change didn’t
factor in the fact that the FundingLocked message will *only* be
re-sent after both sides receive the ChannelReestablishment message.
With the prior code, as we never added the channel to the link, we’d
never re-send the ChannelReestablishment, meaning the other side would
never send the FundingLocked message.

By unconditionally adding the channel to the switch, we ensure that
we’ll always properly retransmit the FundingLocked message.
2017-12-06 16:42:59 -08:00
Olaoluwa Osuntokun
ccd1dad71e
peer: set HtlcPoint to nil within logWireMessage
This new field was added as a recent modification to the spec, but the
curve parameter within the attribute wasn’t set to nil. As a result
this would result in a large degree of spam within the logs when set to
trace mode. This commit fixes this issue by setting it to nil along
with all the other pub keys within messages.
2017-12-01 19:31:56 -08:00
Olaoluwa Osuntokun
c3ec32e67b
peer: display lnwire.Error body as ascii string in messageSummary
It dictates in the spec, that the error message should be an ASCII
string to allow other implementations to easily discern the type of
error. The other implementations do this, but we don’t yet, but we’ll
go ahead and display it anyway as it’s helpful when debugging.
2017-11-30 22:19:18 -08:00
Olaoluwa Osuntokun
58ab3f5f83
peer: show conf depth in message summary for AcceptChannel 2017-11-27 16:50:10 -08:00
Olaoluwa Osuntokun
56632235fd
peer: set FeeEstimator in ChannelLinkConfig when creating link 2017-11-23 23:10:21 -06:00
Olaoluwa Osuntokun
39295dc5aa
lnwallet+peer: add new ResetState method to channel state machine
In this commit, we add a new ResetState method to the channel state
machine which will reset the state of the channel to `channelOpen`. We
add this as before this commit, it was possible for a channel to shift
into the closing state, the closing negotiation be cancelled for
whatever reason, resulting the the channel held by the breachArbiter
unable to act to potential on-chain events.
2017-11-23 23:10:16 -06:00
Olaoluwa Osuntokun
259a01b29d
peer: integrate new channelCloser state machine for co-cop channel closes
In this commit, we refactor the existing channel closure logic for
co-op closes to use the new channelCloser state machine. This results
in a large degree of deleted code as all the logic is now centralized
to a single state machine.
2017-11-23 23:10:11 -06:00
Olaoluwa Osuntokun
1cf1d250b3
peer: update WipeChannel method to match recent htlcswitch API change 2017-11-23 23:10:11 -06:00
Johan T. Halseth
555cead5ad peer: avoid blocked writeHandler<->queueHandler interaction
This commit addresses an issue that could occur if a
message was attempted added to the sendQueue by the
queueHandler before the writeHandler had started.

If a message was sent to the queueHandler before the
writeHandler was ready to accept messages on the
sendQueue, the message would be added to the
pendingMsg queue, but would not be attempted sent
on the sendQueue again before a new incoming message
triggered a new attempt.
2017-11-15 18:54:06 -08:00
Olaoluwa Osuntokun
150ab00842
peer: add message summary for lnwire.ChannelReestablish 2017-11-10 19:51:11 -08:00
Olaoluwa Osuntokun
e337a329cd
peer+rpc: properly set ChainHash in ChannelCloseSummary instances 2017-11-10 19:51:09 -08:00
Andrey Samokhvalov
d70ffe93e4 htlcswitch+channel: add channel states synchronization
In this commit BOLT№2 retranmission logic for the channel link have
been added. Now if channel link have been initialised with the
'SyncState' field than it will send the lnwire.ChannelReestablish
message and will be waiting for receiving the same message from remote
side. Exchange of this message allow both sides understand which
updates they should exchange with each other in order sync their
states.
2017-11-09 16:38:57 -08:00
Conner Fromknecht
04a56e7286
peer: add async queue for gossiper msgs
This commit refactors the core logic of the
  chanMsgStream to support an additional stream
  that is used to asynchronously queue for in-order
  delivery to the authenticated gossiper. The channel
  streams are slightly adapted to use the more flexible
  primitive. We may look to refactor this using more
  isolated interfaces, but for now this provides a
  minimal change to resolving known flakes.
2017-11-02 15:57:12 -07:00
Olaoluwa Osuntokun
bb1fd98b67
peer: print hex encoded failure reason for lnwire.UpdateFailHTLC in msg summaries 2017-10-22 18:36:40 -07:00
Olaoluwa Osuntokun
8de0a4cb24
peer: when logging message summaries use the correct preposition 2017-10-19 19:45:34 -07:00
Olaoluwa Osuntokun
4cf4fd377f
peer: in chanMsgStream release lock for condition var after msg q pop
In this commit we fix an existing bug within the msgConsumer grouting
of the chanMsgStream that could result in a partial deadlock, as the
readHandler would no longer be able to add messages to the message
queue. The primary cause of this issue would be if we got an update for
a channel that “we don’t know of”. The main loop would continue,
leaving the mutex unlocked. We would then try to re-lock at the top of
the loop, leading to a deadlock.

We avoid this situation by properly unlocking the condition variable as
soon as we’re done modifying the condition itself.
2017-10-19 19:45:08 -07:00
Olaoluwa Osuntokun
56d4c15914
peer: add localFeatures as parameter to newPeer
In this commit we add the set of local features advertised as a
parameter to the newPeer function. With this change, the server will be
able to programmatically determine _which_ bits should be set on a
connection basis, rather than re-using the same global set of bits for
each peer.
2017-10-18 15:16:09 -07:00
Olaoluwa Osuntokun
f6f983a13b
peer: rename theirLocalFeatures+theirGlobal features to remote prefix 2017-10-18 15:14:27 -07:00
Jim Posen
af49752d4d peer: Update peer handling of received feature vectors.
This updates peer to be compatible with the new feature vector API.
2017-10-17 22:47:20 -07:00
Olaoluwa Osuntokun
f953f94f71
peer: display reversed bytes of chain hash in message summaries 2017-10-17 19:44:15 -07:00
Olaoluwa Osuntokun
dc124baca1
peer: if cooperative closing transaction is rejected, return err to caller 2017-10-17 19:44:14 -07:00
Olaoluwa Osuntokun
b7e193354a
peer: add message summaries of sent/recv'd message for debug log level
This commit fills in an existing logging gap by adding a new set of
message summaries that is shown for the debug logging level.

Before this commit, if a user wanted to get a close up feel for what
lnd was doing under the covers, they had to use the trace logging
level. Trace can be very verbose, so we now provide a debug logging
level with message “summaries”. The summaries may not contain all the
data in the message, hut have been crafted in order to provide
sufficient detail at a glance.
2017-10-17 19:44:12 -07:00
Olaoluwa Osuntokun
0692d2d408
peer: log type of received unknown message 2017-10-16 18:43:19 -07:00
Olaoluwa Osuntokun
f4e7c36c80
peer: eliminate excessive queueHandler spinning w/ blocked writeHandler
This commit fixes an existing bug within the iteration between the
queueHandler and the writeHandler. Under certain scenarios, if the
writeHandler was blocked for a non negligible period of time, then the
queueHandler would enter a very tight spinning loop. This was due to
the fact that the break statement in the inner select loop of the
queueHandler wouldn’t actually break the inner for loop, instead it
would cause the execution logic to re-enter that same select loop,
causing a very tight spin.

In this commit, we fix the issue by adding to things: we now label the
inner select loop so we can break out of it if we detect that the
writeHandler has blocked. Secondly, we introduce a new channel between
the queueHandler and the writeHandler to signal the queueHandler that
the writeHandler has finished processing the last message.
2017-10-15 15:19:57 -07:00
Olaoluwa Osuntokun
cbdf139696
peer: add an idle timer to the readHandler
In this commit, we add an idle timer to the readHandler itself. This
will serve to slowly prune away inactive TCP connections as a result of
remote peer being blocked either upon reading or writing to the socket.
Our ping timer interval is 1 minute, so an idle timer interval of 5
minutes seem reasonable.
2017-10-15 15:14:35 -07:00
Olaoluwa Osuntokun
63838f5764
peer+server: use new sphinx package and htlcswitch package type names 2017-10-10 22:19:21 -07:00
Olaoluwa Osuntokun
171c997fe0
peer: within loadActiveChannels, skip channel if FundingLocked not processed
This commit fixes a bug to wrap up the recently merged PR to properly
handle duplicate FundingLocked retransmissions and also ensure that we
reliably re-send the FundingLocked message if we’re unable to the first
time around.

In this commit, we skip processing a channel that does not yet have a
set remote revocation as otherwise, if we attempt to trigger a state
update, then we’ll be attempting to manipulate a nil commitment point.
Therefore, we’ll rely on the fundingManager to properly send the
channel all relevant subsystems.
2017-10-02 16:30:28 -07:00
Johan T. Halseth
ee2eec6188
peer: ignore new channel requests for already active channels. 2017-10-02 13:29:54 +02:00
Olaoluwa Osuntokun
c5876e5d21
peer: avoid exit deadlock by ensuring WaitGroups are decremented before disconnect 2017-09-27 20:22:52 -07:00
Olaoluwa Osuntokun
ab25b636f5
peer: add conditional sends on quit within readHandler message dispatch 2017-09-27 20:18:29 -07:00
Olaoluwa Osuntokun
37d03d1e56
peer: avoid possible GC leak by setting popped queue element to nil 2017-09-24 20:08:34 -07:00
Conner Fromknecht
74322a99be config+htlclink+peer: htlc hodl mode!
This commit adds a new debug mode for lnd
  called hodlhtlc. This mode instructs a node
  to refrain from settling incoming HTLCs for
  which it is the exit node. We plan to use
  this in testing to more precisely control
  the states a node can take during
  execution.
2017-09-19 11:31:52 -07:00
Olaoluwa Osuntokun
a43e9c6883
peer: check for ErrEdgeNotFound when loading chan edge for fwrding policy
This commit adds a precautionary check for the error returned if the
channel hasn’t yet been announced when attempting to read the our
current routing policy to initialize the channelLink for a channel.
Previously, if the channel wasn’t they announced, the function would
return early instead of using the default policy.

We also include another bug fix, that avoids a possible nil pointer
panic in the case that the ChannelEdgeInfo reread form the graph is
nil.
2017-08-30 15:34:27 -07:00
Olaoluwa Osuntokun
d4d5198e85
peer: if we don't have an advertised routing policy, fall back to default
This commit fixes a bug that could arise if either we had not, or the
remote party had not advertised a routing policy for either outgoing
channel edge. In this commit, we now detect if a policy wasn’t
advertised, falling back to the default routing policy if so.

Fixes #259.
2017-08-23 11:34:53 -07:00
Olaoluwa Osuntokun
b069406d1e
peer: fix bug, use the existing timestamp for the ChannelUpdate msg
This commit fixes a lingering bug within the logic for the
peer/htlcswitch/channellink. When the link needs to fetch the latest
update to send to a sending party due to a violation of the set routing
policy, previously it would modify the timestamp on the message read
from disk. This was incorrect as it would invalidate the signature
within the message itself. We fix this by instead
2017-08-22 00:53:31 -07:00
Olaoluwa Osuntokun
3086a9d06a
peer: ensure a peer can exit mid cooperative closure
This commit adds another conditional send select statement to ensure
that when sending the finalized contract to the breach arbiter, the
peer doesn’t possible cause the daemon to hang on shutdown.
2017-08-22 00:53:28 -07:00
Olaoluwa Osuntokun
c09713ebd1
peer+server: rename discoverSrv to authGossiper 2017-08-22 00:53:25 -07:00
Olaoluwa Osuntokun
dd1d69b140
peer: fetch forwarding policy from disk rather than using default
This commit modifies the logic when we are loading alll the channels
that we have with a particular peer to grab the current committed
forwarding policy from disk rather then using the default forwarding
policy. We do this as it’s now possible for active channels to have
distinct forwarding policies.
2017-08-22 00:53:23 -07:00