Commit Graph

483 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
7b0ea3c029
Merge pull request #4909 from carlaKC/mc-paramsapi
routing: allow runtime updates to mission control config
2021-02-10 18:51:53 -08:00
Conner Fromknecht
1ee5eb97d5
Merge pull request #5006 from wpaulino/new-rate-limit-chan-updates
discovery: use token bucket based rate limiting to throttle gossip
2021-02-10 17:31:41 -08:00
Wilmer Paulino
d4fa430ca6
Revert "lntest: always turn off gossip throttling for nodes created in itests"
This reverts commit 447c9f2c0be2512b4af0ce1ce5314f661da6952f.
2021-02-10 15:45:47 -08:00
Conner Fromknecht
58e924ad1c
discovery: don't historical sync when NumActiveSyncers == 0
Currently when numgraphsyncpeers=0, lnd will still attempt to perform
an initial historical sync. We change this behavior here to forgoe
historical sync entirely when numgraphsyncpeers is zero, since the
routing table isn't being updated anyway while the node is active.

This permits a no-graph lnd mode where no syncing occurs at all.
2021-02-10 09:35:45 -08:00
carla
63bdd6b07b
itest: add coverage for hold invoices with hop hints
This PR updates the hold invoice itest to create a private
channel, and sets the private option on the invoices created
to add coverage for the addition of hop hints.
2021-02-08 09:19:21 +02:00
Conner Fromknecht
7f006832fb
Merge pull request #4934 from cfromknecht/pinned-active-syncers
discovery: pinned syncers
2021-02-03 10:54:00 -08:00
Conner Fromknecht
814b81bd25
Merge pull request #4902 from Crypt-iQ/lntestchannels_01072021
lntest/channels: introduce subpackage to deduplicate static structs
2021-02-01 14:12:08 -08:00
Conner Fromknecht
227fd45da2
lntest: fix linter errors 2021-01-29 01:37:37 -08:00
Conner Fromknecht
e42301dee2
lntest: call markGraphSynced from gossipSyncer
Rather than performing this call in the SyncManager, we give each
gossipSyncer the ability to mark the first sync completed. This permits
pinned syncers to contribute towards the rpc-level synced_to_graph
value, allowing the value to be true after the first pinned syncer or
regular syncer complets. Unlinke regular syncers, pinned syncers can
proceed in parallel possibly decreasing the waiting time if consumers
rely on this field before proceeding to load their application.
2021-01-29 00:19:48 -08:00
Conner Fromknecht
920eda26fc
lntest/graph_top: test pinned syncers 2021-01-29 00:19:48 -08:00
Conner Fromknecht
ba67f3ecaa
lntest/graph_top: remove dependence on net.Alice/Bob 2021-01-29 00:19:47 -08:00
eugene
f8b98a1d3b
lntest/channels: introduce subpackage to deduplicate static structs 2021-01-25 14:04:39 -05:00
Johan T. Halseth
8c78f20ffa
itest: add testAnchorReservedValue
We test that Alice as expected will not be allowed to spend her wallet
balance below the reserved amount.
2021-01-19 20:06:52 +01:00
carla
64dad77e2e
multi: add get and set mission control to routerrpc 2021-01-19 10:57:15 +02:00
Olaoluwa Osuntokun
ff897db293
Merge pull request #4901 from bhandras/etcd_itest_ci
etcd+itests: use itest generated ports for embedded etcd and add etcd itests to travis CI
2021-01-14 17:53:54 -08:00
Johan T. Halseth
01f31e436a
itest: fix node names out of bounds
If the last channel fails, the indexing into nodeNames would panic. We
instead name the channels, such that the slices will be of the same
length.
2021-01-14 20:55:32 +01:00
Andras Banki-Horvath
b2ab5e8af1
itests: run etcd itests with generated ports 2021-01-08 15:39:12 +01:00
Wilmer Paulino
023f327cdd
lntest: add rebroadcast stale announcements err to whitelist 2021-01-06 14:33:41 -08:00
eugene
caa0f5da6a multi: move and export funding-related vars to funding package
Also moves the lnd global MaxFundingAmount to server.go
2020-12-17 09:36:34 -05:00
Johan T. Halseth
413ece2ccc
itest: account for capped anchor commit fee rate in balance calc 2020-12-15 19:54:50 +01:00
Conner Fromknecht
4af24158c4
Merge pull request #4779 from halseth/anchor-htlc-aggregation
[anchors] HTLC second level aggregation in the sweeper
2020-12-11 16:22:17 -08:00
Oliver Gugger
094545a300
itest: add neutrino errors to whitelist 2020-12-11 08:55:45 +01:00
Johan T. Halseth
1627310fb0
itest: add HTLC aggregation test 2020-12-10 14:24:21 +01:00
Johan T. Halseth
42c51b662a
itest/channel_force_close test: handle HTLCs going through sweeper
Now that the HTLC second-level transactions are going through the
sweeper instead of the nursery, there are a few things we must account
for.
1. The sweeper sweeps the CSV locked HTLC output one block earlier than
   the nursery.
2. The sweeper aggregates several HTLC second levels into one
   transaction. This also means it is not enough to check txids of the
   transactions spent by the final sweep, but we must use the actual
   outpoint to distinguish.
2020-12-10 14:24:21 +01:00
Johan T. Halseth
4b9fbe2146
itest/local_chain_claim test: mine one less blocks for anchor sweeps
In case of anchor channel types, we mine one less block before we expect
the second level sweep to appear in the mempool, since the sweeper
sweeps one block earlier than the nursery.
2020-12-10 14:24:21 +01:00
Johan T. Halseth
241e21a0d1
itest: use hex encoded hash in error message 2020-12-10 14:24:18 +01:00
Johan T. Halseth
09f2307d14
itest: increase htlc amt for local force close tests
Since the tests set a quite high fee rate before the node goes to chain,
the HTLCs wouldn't be economical to sweep at this fee rate.

Pre sweeper handling of the second-level transactions this was not a
problem, since the fees were set when the second-levels were created,
before the fee estimate was increased.
2020-12-10 14:24:18 +01:00
Oliver Gugger
a08d6c469f
itest: update and sort error whitelist 2020-12-09 09:06:14 +01:00
Oliver Gugger
af0f39f4a6
itest: fix log whitelist check
Because a previous PR changed the location of the itest log files, we
also need to update the script that looks for non-whitelisted errors.
2020-12-09 08:06:16 +01:00
Conner Fromknecht
2f38a7ce9c
itest: increase recovery payment amount so htlc isn't dust 2020-12-08 14:55:40 -08:00
Oliver Gugger
9de659ea4f
itest: use require.Eventually where tick speed matters
To not waste a lot of time with the adjusted longer tick interval, we
use a short interval with require.Eventually where we can save some
time.
2020-12-08 21:40:37 +01:00
Oliver Gugger
a436618e43
lntest: fix linter errors for changed code 2020-12-08 21:40:36 +01:00
Oliver Gugger
809d238364
itest: wait for server to start when restoring
To avoid running into the "server is still starting" error when trying
to close a channel, we first wait for the error to disappear before we
try closing the actual channel.
2020-12-08 21:40:31 +01:00
Oliver Gugger
cdcbc0376d
lntest: replace hard coded timeouts
This commit replaces most of the hard coded 10, 15, 20 and 30 second
timeouts with the default timeout. This should allow darwin users to
successfully run the parallel itests locally as well.
2020-12-08 21:37:12 +01:00
Oliver Gugger
3823315820
lntest: go easy on goroutines when polling
In high CPU usage scenarios such as our parallel itests, it seems that
some goroutines just don't get any CPU time before our test timeouts
expire. By polling 10 times less frequently, we hope to reduce the
overall number of goroutines that are spawned because of the RPC
requests within the polling code.
2020-12-08 21:37:11 +01:00
Oliver Gugger
4d2a12e552
itest: fix incorrect error message 2020-12-08 21:37:10 +01:00
Conner Fromknecht
123c3a2530
itest: defer shutdown of nodes in main test method
This ensures that the nodes will properly be shutdown even if one fails
to start or any of them fail to connect. Previously the shutdown is
defered only in the event that the setup was successful.
2020-12-03 23:06:32 -08:00
Conner Fromknecht
374725842e
itest: use fresh alice and bob for fwd interceptor tests 2020-12-03 23:06:32 -08:00
Conner Fromknecht
92b820a6d1
itest: move to require in forward_interceptor_test
Certain checks were implemented with Errorf, which only logs the
failure. This results in the test harness panicking further down. We go
further ahead and convert all calls in this file to use require.
2020-12-03 23:06:29 -08:00
Oliver Gugger
36756c012d
lntest: use nextAvailablePort for miner and btcd backend
With the new btcd version we can specify our own listen address
generator function for any btcd nodes. This should reduce flakiness as
the previous way of getting a free port was based on just picking a
random number which lead to conflicts.
We also double the default values for connection retries and timeouts,
effectively waiting up to 4 seconds in total now.
2020-12-03 11:30:23 +01:00
Oliver Gugger
2edc3cf98f
multi: update to latest btcd version
With this commit we update btcd to the latest version which allows us to
specify the btcd binary we want to use when spinning up a new node.
2020-12-03 11:30:22 +01:00
Oliver Gugger
0a4962a18e
itest: run sub itests correctly
To avoid the "Error outside of test" log and to properly terminate the
test if a sub test fails, we need to correctly invoke them using the
RunTestCase method.
2020-12-01 22:24:03 +01:00
Johan T. Halseth
8ec4697fe3
Merge pull request #4810 from Roasbeef/gossip-throttle-config
multi: add new config option to toggle gossip rate limiting
2020-12-01 13:32:52 +01:00
Olaoluwa Osuntokun
94f8311667
Merge pull request #4782 from cfromknecht/anchor-wtserver
watchtower: anchor channel support
2020-11-30 17:49:32 -08:00
Olaoluwa Osuntokun
447c9f2c0b
lntest: always turn off gossip throttling for nodes created in itests 2020-11-30 16:39:06 -08:00
Olaoluwa Osuntokun
7e298f1434
Merge pull request #3367 from cfromknecht/batched-graph-updates
Batched graph updates
2020-11-25 18:40:40 -08:00
Conner Fromknecht
82a238317c
lncfg+itest: expose configurable batch-commit-interval
This will permit a greater degree of tuning or customization depending
on various hardware/environmental factors.
2020-11-25 16:45:25 -08:00
Olaoluwa Osuntokun
4e079d1d20
lntest/itest: fix SendToRoute in UpdateChanPolicy test
It needs to include the MPP payload  now.
2020-11-25 16:32:15 -08:00
Olaoluwa Osuntokun
7fdf46ea4e
lntest/itest: update SendToRoute tests to include payment addr 2020-11-25 16:32:09 -08:00
Olaoluwa Osuntokun
d996607470
routing+lnrpc: extend BuildRoute to accept raw payAddr
In this commit, we extend the `BuildRoute` method and RPC on the router
sub-server to accept a raw payment address which will be included as
part of an MPP payload for the finla hop. This change actually also
allows users to craft their own MPP paths using BuildRoute+SendToRoute.
Our primary goal however, was to fix some broken itests since we now
require the payAddr to be present for ALL payments other than key send
payments.
2020-11-25 16:32:02 -08:00