In this commit, we made the change so that when sweeping anchors for the
commitment transactions, we will be aware of the deadline which is
derived from its HTLC set. It's very likely we will use a much larger
conf target from now on, and save us some sats.
This commit adds a new struct AnchorResolutions which wraps the anchor
resolutions for local/remote/pending remote commitment transactions. It
is then returned from NewAnchorResolutions. Thus the caller knows how to
retrieve a certain anchor resolution.
closed
This commit makes the handoff procedure between the breachabiter and
chainwatcher use a function closure to mark the channel pending closed
in the DB. Doing it this way we know that the channel has been markd
pending closed in the DB when ProcessACK returns.
The reason we do this is that we really need a "two-way ACK" to have the
breacharbiter know it can go on with the breach handling. Earlier it
would just send the ACK on the channel and continue. This lead to a race
where breach handling could finish before the chain watcher had marked
the channel pending closed in the database, which again lead to the
breacharbiter failing to mark the channel fully closed.
We saw this causing flakes during itests.
This commit moves the contract breach event dispatch after the channel
close summary has been added to the database. This is important
otherwise it may occur that we attempt to mark the channel fully closed
while the channel close summary is not yet serialized.
This commit moves the logic for sweeping the confirmed second-level
timeout transaction into its own method.
We do a small change to the logic: When setting the spending tx in the
report, we use the detected commitspend instead of the presigned tiemout
tx. This is to prepare for the coming change where the spending
transaction might actually be a re-signed timeout tx, and will therefore
have a different txid.
success tx
This commit makes the HTLC resolutions having non-nil SignDetails
(meaning we can re-sign the second-level transactions) go through the
sweeper. They will be offered to the sweeper which will cluster them and
arrange them on its sweep transaction. When that is done we will further
sweep the output on this sweep transaction as any other second-level tx.
In this commit we do this for the HTLC success resolver and the
accompanying HTLC success transaction.
To make the linter happy, make a pointer to the inner resolver.
Otherwise the linter would complain with
copylocks: literal copies lock value
since we'll add a mutex to the resolver in following commits.
* mod: bump btcwallet version to accept db timeout
* btcwallet: add DBTimeOut in config
* kvdb: add database timeout option for bbolt
This commit adds a DBTimeout option in bbolt config. The relevant
functions walletdb.Open/Create are updated to use this config. In
addition, the bolt compacter also applies the new timeout option.
* channeldb: add DBTimeout in db options
This commit adds the DBTimeout option for channeldb. A new unit
test file is created to test the default options. In addition,
the params used in kvdb.Create inside channeldb_test is updated
with a DefaultDBTimeout value.
* contractcourt+routing: use DBTimeout in kvdb
This commit touches multiple test files in contractcourt and routing.
The call of function kvdb.Create and kvdb.Open are now updated with
the new param DBTimeout, using the default value kvdb.DefaultDBTimeout.
* lncfg: add DBTimeout option in db config
The DBTimeout option is added to db config. A new unit test is
added to check the default DB config is created as expected.
* migration: add DBTimeout param in kvdb.Create/kvdb.Open
* keychain: update tests to use DBTimeout param
* htlcswitch+chainreg: add DBTimeout option
* macaroons: support DBTimeout config in creation
This commit adds the DBTimeout during the creation of macaroons.db.
The usage of kvdb.Create and kvdb.Open in its tests are updated with
a timeout value using kvdb.DefaultDBTimeout.
* walletunlocker: add dbTimeout option in UnlockerService
This commit adds a new param, dbTimeout, during the creation of
UnlockerService. This param is then passed to wallet.NewLoader
inside various service calls, specifying a timeout value to be
used when opening the bbolt. In addition, the macaroonService
is also called with this dbTimeout param.
* watchtower/wtdb: add dbTimeout param during creation
This commit adds the dbTimeout param for the creation of both
watchtower.db and wtclient.db.
* multi: add db timeout param for walletdb.Create
This commit adds the db timeout param for the function call
walletdb.Create. It touches only the test files found in chainntnfs,
lnwallet, and routing.
* lnd: pass DBTimeout config to relevant services
This commit enables lnd to pass the DBTimeout config to the following
services/config/functions,
- chainControlConfig
- walletunlocker
- wallet.NewLoader
- macaroons
- watchtower
In addition, the usage of wallet.Create is updated too.
* sample-config: add dbtimeout option
This adds the scenario to the local force close test cases where a node
force closes one of its channels, then lose state (or do recovery)
before the commmitment is confirmed. Without the previous commit this
would go undetected.
outdated local state
This commit fixes a bug that would cause us to not sweep our local
output in case we force closed, then lost state or attempted recovery.
The reason being that we would use or local commit height when deriving
our scripts, which would be incorrect. Instead we use the extracted
state number to derive the correct scripts, allowing us to sweep the
output.
Allthough being an unlikely scenario, we would leave money on chain in
this case without any warning (since we would just end up with an empty
delay script) and forget about the spend.
Similar to what we did for the local state handling, we extract handling
all known remote states we can act on (breach, current, pending state)
into its own method.
Since we want to handle the case where we lost state (both in case of
local and remote close) last, we don't rely on the remote state number
to check which commit we are looking at, but match on TXIDs directly.
The tests didn't really roll back the channel state, so we would only
rely on the state number to determine whether we had lost state. Now we
properly roll back the channel to a previous state, in preparation for
upcoming changes.
To allow us to grab all of the information we need for our channel arbs
in a more efficient way on startup, we add an optional tx to our lookup
functions required on start.
Similarly as with kvdb.View this commits adds a reset closure to the
kvdb.Update call in order to be able to reset external state if the
underlying db backend needs to retry the transaction.
This commit adds a reset() closure to the kvdb.View function which will
be called before each retry (including the first) of the view
transaction. The reset() closure can be used to reset external state
(eg slices or maps) where the view closure puts intermediate results.
For unconfirmed commit tx anchors, supply the sweeper with cpfp info and
a confirmation target fee estimate.
The sweeper will try to pay for the parent commit tx as long as the
current fee estimate exceeds the pre-signed commit tx fee rate.
Extend the fee estimator to take into account parent transactions with
their weights and fees.
Do not try to cpfp parent transactions that have a higher fee rate than
the sweep tx fee rate.
The sweeper call UpdateParams does not update the exclusive group
property of a pending sweep. This led to anchor outputs being swept
after confirmation with an exclusive group restriction, which is not
necessary.
This commit changes the anchor resolver to not use UpdateParams anymore,
but instead always re-offer the anchor input to the sweeper. The sweeper
is modified so that a re-offering also updates the sweep parameters.
This commit moves all localized instances of mock implementations of
the Signer interface to the lntest/mock package. This allows us to
remove a lot of code and have it housed under a single interface in
many cases.
Follow up labelling of external transactions with labels for the
transaction types we create within lnd. Since these labels will live
a life of string matching, a version number and rigid format is added
so that string matching is less painful. We start out with channel ID,
where available, and a transaction "type". External labels, added in a
previous PR, are not updated to this new versioned label because they
are not lnd-initiated transactions. Label matching can check this case,
then check for a version number.
When a remote peer claims one of our outgoing htlcs on chain, we do
not care whether they claimed with multiple stages. We simply store
the claim outgome then forget the resolver.
Incoming htlcs that are timed out or failed (invalid htlc or invoice
condition not met), save a single on chain resolution because we don't
need to take any actions on them ourselves (we don't need to worry
about 2 stage claims since this is the success path for our peer).
Our current set of reports contain much of the information we will
need to persist contract resolutions. We add a function to create
resolver reports from our exiting set of resolutions.
