Conner Fromknecht
7f9dcc143f
make: add unit-debug target
2021-02-17 08:47:59 -08:00
Conner Fromknecht
db5af6fc14
Merge pull request #5017 from Roasbeef/default-max-parts
...
routing: if MaxShardAmt is set, then use that as a ceiling for our splits, use default of 16 for MaxParts
2021-02-16 09:43:34 -08:00
Olaoluwa Osuntokun
db69331db9
cmd/lncli: add max shard size parsing for payment commands
2021-02-15 19:31:58 -08:00
Olaoluwa Osuntokun
b73a6e2c61
routing: if MaxShardAmt is set, then use that as a ceiling for our splits
...
In this commit, we thread through the necessary state to allow users to
set a max shard amount. If this value is set, then this'll effectively
serve as a ceiling for all our split attempts. If we need to split,
we'll first try to use `paymentAmt/2`, if that's bigger than
`MaxShardAmt, then we'll use the latter instead.
Ideally in the future we have a dynamic way to automatically set both
the `MaxShardAmt` as well as `MaxParts` for users. Until then exposing
these two new fields will allow us to experiment with setting them
automatically using the RPC interface, and also give users a bit more
control over how we attempt to route payments, akin to coin control for
on-chain payments.
Fixes #4730
2021-02-15 19:31:52 -08:00
Olaoluwa Osuntokun
7398e59927
lnrpc/routerrpc+routing: add new MaxShardAmt field to LightningPayment
2021-02-15 19:31:49 -08:00
Olaoluwa Osuntokun
c70e53c791
lnrpc/routerrpc: add new max_shard_size_msat field to SendPaymentRequest
2021-02-15 19:31:46 -08:00
Olaoluwa Osuntokun
d5cf6043e6
lnrpc/routerrpc: use new default value of 16 for maxparts
...
In this commit, we raise the default value for the `MaxParts` field from
1 to 16. This change was motivated by the fact that many users either
forget, or don't even know this field is there in the first place. A
value of 16 was chosen rather arbitraliy (other than power of 2). In
the future, we should tune this value based on the expected number of
payment attempts for a given payment amount.
2021-02-15 19:31:43 -08:00
Conner Fromknecht
8c06eb57c5
Merge pull request #5026 from cfromknecht/init-mock-fee-estimator
...
htlcswitch: init mockFeeEstimator in other LinkChannelConfigs
2021-02-15 13:03:02 -08:00
Conner Fromknecht
4fcc82251e
Merge pull request #5016 from cfromknecht/extract-channel-whitelist
...
lntest: update error log whitelist
2021-02-15 12:50:33 -08:00
Conner Fromknecht
fd3dd2cfff
Merge pull request #5023 from cfromknecht/min-required-sigs-five
...
scripts/verify-install: require 5 of 7 signatures before accepting
2021-02-15 12:17:36 -08:00
Conner Fromknecht
774d29d890
htlcswitch: init mockFeeEstimator in other LinkChannelConfigs
...
If the tests don't execute quick enough, the link will try to sample the
network fee and cause a panic. This happens semi-regularly on travis.
2021-02-15 12:14:32 -08:00
Conner Fromknecht
95eadfee2f
scripts/verify-install.sh: combine final SUCCESS logs
2021-02-15 10:00:42 -08:00
Conner Fromknecht
c03f95a63b
scripts/verify-install: bump min required signatures to 5
2021-02-15 09:59:59 -08:00
Conner Fromknecht
12182d0fc9
Merge pull request #5019 from guggero/detach-sign
...
release: create and verify detached signatures, fix hashing command on MacOS
2021-02-15 09:48:17 -08:00
Oliver Gugger
85c42b0b79
scripts: add more verbose error messages to verification
...
We want to be more precise in what exactly went wrong and what the cause
could be.
2021-02-15 10:47:46 +01:00
Oliver Gugger
99ba272822
docs+scripts: switch to detached signatures
...
Due to a misunderstanding of how the gpg command line options work, we
didn't actually create detached signatures because the --clear-sign
flag would overwrite that. We update our verification script to now only
download the detached signatures and verify them against the main
manifest file.
We also update the signing instructions.
2021-02-15 10:33:20 +01:00
Oliver Gugger
132d23c964
scripts: verify hash length
...
To make sure we've actually calculated the hash correctly, we make sure
it's 64 characters long.
2021-02-15 10:26:17 +01:00
Oliver Gugger
644424296b
scripts: use shasum instead of sha256sum
...
Because the sha256sum binary isn't available on MacOS we instead use the
shasum -a 256 command that was used before.
2021-02-15 10:26:15 +01:00
Conner Fromknecht
4a96c2e55a
Merge pull request #5021 from guggero/custom-binary-verify
...
scripts: allow verification of custom binary
2021-02-12 12:04:49 -08:00
Conner Fromknecht
32507bc835
Merge pull request #5020 from guggero/expand-path
...
config: clean and expand backup file path
2021-02-12 09:19:39 -08:00
Oliver Gugger
aca93199cf
scripts: allow verification of custom binary
...
Instead of only allowing the installed versions of lnd and lncli to be
verified, we now also support specifying explicit paths to binaries that
we want to verify.
2021-02-12 13:22:13 +01:00
Oliver Gugger
1a2cb9b975
config: clean and expand backup file path
...
Because the CleanAndExpandPath function wasn't applied to the backup
file path, any path that contained a tilde for the home directory didn't
work.
2021-02-12 11:14:36 +01:00
Conner Fromknecht
91a3350dd1
lntest: add Block height out of range to whitelist
2021-02-11 17:51:07 -08:00
Conner Fromknecht
cc34af4e57
lntest: add unable to extract ChannelUpdate to whitelist
2021-02-11 17:48:41 -08:00
Conner Fromknecht
76e0388368
Merge pull request #5013 from lightningnetwork/release-pin-go-version
...
github/workflows: pin exact docker release
2021-02-11 17:24:07 -08:00
Conner Fromknecht
a6b977e760
github/workflows: pin exact docker release
2021-02-11 16:05:32 -08:00
Johan T. Halseth
b52e872878
Merge pull request #4899 from halseth/ignore-local-ann-from-remote
...
[gossiper] Ignore received ChannelAnnouncements for own channels
2021-02-11 18:39:15 +01:00
Johan T. Halseth
926005aefa
discovery/gossiper: ignore remote ChannelAnnouncement for own channel
...
To avoid learning about our own channel we have already closed and
removed from our graph, we ignore all ChannelAnns for channels we are
involved in.
2021-02-11 15:13:51 +01:00
Johan T. Halseth
e8f7a11470
gossiper_test: split keys into self/remote
...
To make it more clear what is local and remote messages, we change to
use `selfKey` only for local messages.
2021-02-11 15:13:51 +01:00
Johan T. Halseth
4268bcc9f9
gossiper_test: combine local/remote chan ann
...
It will be the same announcement, no need to distinguish.
2021-02-11 15:13:51 +01:00
Johan T. Halseth
f047c3517f
discovery/gossiper: remove source pubkey from ProcessLocalAnnouncement params
2021-02-11 15:13:51 +01:00
Johan T. Halseth
69770f15e4
server: use nodeKeyECDH everywhere
2021-02-11 15:13:51 +01:00
Johan T. Halseth
06253e4dcc
Merge pull request #5012 from halseth/rpc-check-fix
...
lnrpc: format protos
2021-02-11 15:13:20 +01:00
Johan T. Halseth
0227aaab1f
lnrpc: format protos
2021-02-11 15:06:12 +01:00
Olaoluwa Osuntokun
3ad8b86bac
Merge pull request #5007 from Roasbeef/ipv6-tor-parse-fix
...
lncfg: add IPv6 resolution bypass & account for local hostname aliases
2021-02-10 23:49:47 -08:00
Olaoluwa Osuntokun
7b0ea3c029
Merge pull request #4909 from carlaKC/mc-paramsapi
...
routing: allow runtime updates to mission control config
2021-02-10 18:51:53 -08:00
Olaoluwa Osuntokun
e41091a765
lncfg: detect tor resolution error case and fallback to system resolver
...
In this commit, we fix a bug that would cause resolution of items in
/etc/hosts (or the like) to fail as Tor wouldn't recognize them as
proper host names. With this commit, we'll catch this error and fall
back to the system's resolver.
2021-02-10 18:36:57 -08:00
Olaoluwa Osuntokun
099efadd92
lncfg: use net.ParseIP to detect IPv6 addresses
2021-02-10 18:35:53 -08:00
Olaoluwa Osuntokun
355b6a260f
Merge pull request #4964 from halseth/gossip-local-no-batch
...
channeldb+routing+gossiper: add local updates to graph immediately
2021-02-10 18:00:47 -08:00
Conner Fromknecht
1ee5eb97d5
Merge pull request #5006 from wpaulino/new-rate-limit-chan-updates
...
discovery: use token bucket based rate limiting to throttle gossip
2021-02-10 17:31:41 -08:00
Conner Fromknecht
5afc6b9284
Merge pull request #4945 from cfromknecht/no-graph-sync
...
discovery: no graph sync
2021-02-10 17:07:24 -08:00
Wilmer Paulino
83a0d03c0b
discovery: use token bucket based rate limiting to throttle gossip
...
The recently added gossip throttling was shown to be too aggressive,
especially with our auto channel enable/disable signaling. We switch to
a token bucket based system instead as it's based on time, rather than a
block height which isn't constantly updated at a given rate.
2021-02-10 16:21:13 -08:00
Wilmer Paulino
1f1f7be770
Revert "lncfg: add new legacy protocol option to turn off gossip throttling"
...
This reverts commit b1fbbcf562
2021-02-10 15:45:49 -08:00
Wilmer Paulino
bfc8523873
Revert "discovery: add new option to toggle gossip rate limiting"
...
This reverts commit 13a2598ded
2021-02-10 15:45:48 -08:00
Wilmer Paulino
d4fa430ca6
Revert "lntest: always turn off gossip throttling for nodes created in itests"
...
This reverts commit 447c9f2c0b
2021-02-10 15:45:47 -08:00
Johan T. Halseth
c9afc93151
discovery/gossiper: add local updates to graph immediately
...
Since the batch interval can potentially be long, adding local updates
to the graph could be slow. This would slow down operations like adding
our own channel update and announcements during the funding process, and
updating edge policies for local channels.
Now we instead check whether the update is remote or not, and only for
remote updates use the SchedulerOption to lazily add them to the graph.
2021-02-10 23:54:03 +01:00
Johan T. Halseth
7e34132c53
routing: let graph methods take scheduler option
2021-02-10 23:54:03 +01:00
Johan T. Halseth
b5d6d7b4fd
channeldb: add SchedulerOp arg to graph update methods
2021-02-10 23:54:03 +01:00
Johan T. Halseth
e3b529939e
batch: add option for executing requests immediately
...
We make the default non-lazy, and will make the incoming gossip requests
lazy.
2021-02-10 23:54:02 +01:00
Olaoluwa Osuntokun
503536c1e4
Merge pull request #5003 from Roasbeef/premature-upd-revert
...
Revert "Merge pull request #4895 from wpaulino/disallow-premature-cha…
2021-02-10 14:44:18 -08:00
