Commit Graph

123 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
f6ac31281b
routing: also include the source node in the nextHopMap index
In this commit we modify the newRoute function to also add the source
node to the nextHopMap index. With this addition the indexes will now
allow the router to react based on failures that occur during the
_first_ hop, meaning the channel directly attached to the source node.
2017-10-10 22:19:23 -07:00
Olaoluwa Osuntokun
b07e7fb7cc
routing: hop-payload for last hop should be the absolute timeout, not delta
This commit fixes an oversight in the path finding code when converting
a path into a route. Currently, for the last hop, we’d emplace the
expiry delta of the last hop within the per-hop payload. This was left
over from a prior version of the specification.

To fix this, we’ll now emplace the _absolute_ final HTLC expiry with
the payload, such that, the final hop that verify that the HTLC has not
been tampered with in flight.
2017-09-12 21:27:47 +02:00
Olaoluwa Osuntokun
6467fdd829
routing: update path finding and notifications to use mSAT 2017-08-22 00:53:12 -07:00
Olaoluwa Osuntokun
8c3441b30f
routing: update test to account for proper time locks 2017-08-02 21:07:35 -07:00
Johan T. Halseth
39a59bbe6f routing: Require adding edge to node before adding node.
This commit introduces the requirement specified in BOLT#7,
where we ignore any node announcements for a specific node
if we yet haven't seen any channel announcements where this
node takes part. This is to prevent someone DoS-ing the
network with cheap node announcements. In the router this
is enforced by requiring a call to AddNode(node_id) to
be preceded by an AddEdge(edge_id) call, where node_id is
one of the nodes in edge_id.
2017-08-02 15:58:58 -07:00
Olaoluwa Osuntokun
1be4d67ce4
multi: run all test instances in parallel 2017-06-17 01:00:07 +02:00
Olaoluwa Osuntokun
2452f2ed82
routing: update test to assert correctness of per-hop payloads 2017-06-16 22:45:30 +02:00
Andrey Samokhvalov
19174ebdfd channeldb: add storing of node signature and add edge signature
In order to properly announce the channel the announcements proofs
should be persistent in boltdb.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
b4ac7071ff discovery+routing: split 'routing' package on 'routing' and 'discovery'
In this commit the routing package was divided on two separete one,
this was done because 'routing' package start take too much responsibily
on themself, so with following commit:

Routing pacakge:
Enitites:
* channeldb.ChannelEdge
* channeldb.ChannelPolicy
* channeldb.NodeLightning

Responsibilities:
* send topology notification
* find payment paths
* send payment
* apply topology changes to the graph
* prune graph
* validate that funding point exist and corresponds to given one
* to be the source of topology data

Discovery package:
Entities:
* lnwire.AnnounceSignature
* lnwire.ChannelAnnouncement
* lnwire.NodeAnnouncement
* lnwire.ChannelUpdateAnnouncement

Responsibilities:
* validate announcement signatures
* sync topology with newly connected peers
* handle the premature annoucement
* redirect topology changes to the router susbsystem
* broadcast announcement to the rest of the network
* exchange channel announcement proofs

Before that moment all that was in the 'routing' which is quite big for
one subsystem.

split
2017-03-29 19:49:05 -07:00
bryanvu
085b7333cb lnwire: add support for Features in NodeAnnouncement
Add support for Features in NodeAnnouncment according to spec.
2017-03-29 12:03:43 -07:00
bryanvu
9ffac9eae1 lnwire: update NodeAnnouncement to handle multiple addresses
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
2017-03-29 12:03:43 -07:00
Olaoluwa Osuntokun
aaa04bb2e5
routing: add findPaths function whcih implements Yen's Algorithm
With this commit we make our routing more robust by looking for the
k-shortest paths rather than a single shortest path and using that
unconditionally. In a nut shell Yen’s algorithm does the following:
   * Find the shortest path from the source to the destination
   * From k=1…K, walk the kth shortest path and find possible
divergence from each node in the path

Our version of Yen’s implemented is slightly modified, rather than
actually increasing the edge weights or remove vertexes from the graph,
we instead use two black-lists: one for edges and the other for
vertexes. Our modified version of Djikstra’s algorithm is then made
aware of these black lists in order to more efficiently implement the
path iteration via spur and root node.
2017-03-21 12:20:37 -07:00
Olaoluwa Osuntokun
56d27f2d58
routing: rename findRoute to findPath, return path in forwards order
This commit modifies the findRoute method by first calling it findPath,
but also making the following modifications.

First, two new black-listing maps are now passed in. These two maps
contain vertexes but also edges to ignore while performing path
finding. These maps will be used in order to ensure that we don’t
duplicate paths or back-track when executing our KSP algorithm.

Next, we now ensure that the path returned from the findPath function
is ordered properly in the direction of source to target. Such a change
is required for our KSP algorithm to function properly.
2017-03-21 12:20:35 -07:00
Olaoluwa Osuntokun
e0ef63e4e0
routing: findRoute now returns a slice of selected hops in reverse order
This commit modifies the findRoute function to decouple the
validation+creation of a route, from the path finding algorithm itself.
When we say “route”, we mean the full payment route complete with
time-lock and fee information. When we say “path” we simple mean an
ordered set of channel edges from one node to another target node.

With this commit we can now perform path finding independent of route
creation which will be needed in the up coming refactor to implement a
new modified k-shortest paths algorithm.
2017-03-21 12:20:28 -07:00
Olaoluwa Osuntokun
c6c56173a8
routing: modify findRoute to accept starting node as a paramter
This commit slightly modified findRoute to accept the node which should
be used as the starting point in our path finding algorithm. With this
change, as we move to a k-shortest paths algorithm this modification
will be needed as all of our path finding attempts won’t always
originate from a the same starting point.
2017-03-21 12:20:25 -07:00
Olaoluwa Osuntokun
20aba8060f
routing: add sufficient link capacity to our relaxation condition
This commit modifies our modified version of Dijkstra's to include
sufficient link capacity within the algorithm’s relaxation condition.
With this change, we’ll now avoid exploring the graph in the direction
of a link that has insufficient capacity, allowing us to terminate path
finding more quickly.
2017-03-21 12:20:21 -07:00
Andrey Samokhvalov
61991a1c89 lnd: fix latest goclean.sh lint warning 2017-03-13 16:30:23 -07:00
Andrey Samokhvalov
fd97a4bd19 lnd: partially fix golint warnings 2017-03-13 16:30:23 -07:00
Andrey Samokhvalov
f2843dd4c9 lnd: fix gofmt warnings 2017-03-13 16:30:23 -07:00
Olaoluwa Osuntokun
7bdf02bc9e
routing: modify path finding routines use new EdgeInfo/EdgePolicy
This commit modifies the path finding routines to properly use the new
channel edge related API exposed by the database. Additionally, a new
type `ChannelHop` has been introduced which couples an edges routing
policy with the capacity and origin chain of the channel.
2017-03-08 14:25:05 -08:00
Christopher Jämthagen
24a569b047 routing: add proper test for excessive number of hops 2017-02-02 00:24:16 -08:00
Olaoluwa Osuntokun
5affed38fc
multi: update btcsuite API's to latest upstream changes
This commit makes a large number of minor changes concerning API usage
within the deamon to match the latest version on the upstream btcsuite
libraries.

The major changes are the switch from wire.ShaHash to chainhash.Hash,
and that wire.NewMsgTx() now takes a paramter indicating the version of
the transaction to be created.
2017-01-05 13:56:34 -08:00
Olaoluwa Osuntokun
e327ffe954
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks
This commit overhauls the routing package significantly to simplify the
code, conform to the rest of the coding style within the package, and
observe the new authenticated gossiping scheme outlined in BOLT07.

As a major step towards a more realistic path finding algorithm, fees
are properly calculated and observed during path finding. If a path has
sufficient capacity _before_ fees are applied, but afterwards the
finalized route would exceed the capacity of a single link, the route
is marked as invalid.

Currently a naive weighting algorithm is used which only factors in the
time-lock delta at each hop, thereby optimizing for the lowest time
lock. Fee calculation also isn’t finalized since we aren’t yet using
milli-satoshi throughout the daemon. The final TODO item within the PR
is to properly perform a multi-path search and rank the results based
on a summation heuristic rather than just return the first (out of
many) route found.

On the server side, once nodes are initially connected to the daemon,
our routing table will be synced with the peer’s using a naive “just
send everything scheme” to hold us over until I spec out some a
efficient graph reconciliation protocol. Additionally, the routing
table is now pruned by the channel router itself once new blocks arrive
rather than depending on peers to tell us when a channel flaps or is
closed.

Finally, the validation of peer announcements aren’t yet fully
implemented as they’ll be implemented within the pending discovery
package that was blocking on the completion of this package. Most off
the routing message processing will be moved out of this package and
into the discovery package where full validation will be carried out.
2016-12-27 16:44:22 -08:00