In this commit we add some additional scenarios to the TestForceClose
test. With this expanded test case, we now ensure the the party that
force closes is able to properly sweep both incoming and outgoing
HTLC’s fully with the information contained the HtlcResolution struct.
In this commit, we update the channel state machine tests to use a new
key for each purpose. Before this commit, the same key would be used
the entire time. As a result, a few bugs slipped by that would’ve been
detected if we used fresh keys for each purpose. Additionally, this
reflect the real world case as we always use distinct keys for each
purpose to avoid key re-use.
In this commit, we’ve added a new HtlcResolutions struct to house both
the incoming and outgoing HTLC resolutions. This struct will now be
coupled with the object that returns when we detect that a commitment
transaction was closed on chain. For incoming HTLC’s, we’ll check the
preimage cache to see if we can claim the HTLC on-chain. If we can,
then we’ll copy of the preimage, and make a proper incoming HTLC
resolution.
In this commit, we modify the OutgoingHtlcResolution struct to detect
if this is the remote party’s commitment transaction or not. With this
change, we’ll now be able to properly time out an HTLC that was
detected on the commitment transaction of the remote peer.
Additionally, we now populate the CsvDelay (if local commitment) and
the ClaimOutpoint (as we may be sweeping directly from the commitment
transaction now.
In this commit, we add a new IncomingHtlcResolution struct. This is the
opposite of the existing OutgoingHtlcResolution struct. The items in
this new struct allow callers to sweep an incoming HTLC that we know
the preimage to. These will always be created when a commitment goes
on-chain. However, if we know the preimage, then that will be populated
in place of all zeroes in the Preimage field.
In this commit, we modify both the ForceCloseSummary, and the
UnilateralClosureSummary to return the items needed to sweep the
commitment output distinctly. By doing this, it’s now possible to pass
a dedicated struct to a sub-system in order to allow it to sweep a
commitment output. As the maturity delay is a part of this new struct,
this tells the caller if this was on the local commitment (CSV
required) or on the remote commitment (no CSV required).
In this commit, we’ve added a new method to the channel state machine:
ActiveHtlcs. This method will allow callers to poll the state of the
channel to retrieve the set of HTLC’s active on *both* commitment
transactions.
In this commit, we modify the RevokeCurrentCommitment method to now
return the set of active HTLC’s. This will be used by callers in the
future to update other sub-systems when the set of HTLC’s on the
commitment changes, and can also be used on the RPC level to
synchronize systems level integration tests.
By returning a *TxWeightEstimator from each method, we now all callers
to chain the methods. This adds a bit of nice sugar when interacting
with the struct.
In this commit, we rename several of the existing WitnessType
definitions to be more descriptive than they were previously. We also
add a number of additional types which we need to handle scripts for,
but weren’t yet added before. Finally, we modify the
receiverHtlcSpendTimeout to optionally take an additional parameter to
set the locktime of the spending transaction accordingly. This final
modification allows the caller to specify that the lock time has
already been set on the main transaction.
To implement the BOLT 03 test vectors, a more powerful mockSigner is
required. The new version of mockSigner stores multiple keys and signs
the transaction outputs with the appropriate one.
This commit adds an additional check in GetUtxo that
tests for the nil-ness of the spend report returned by
the neutrino backend. Previously, a nil error and
spend report could be returned if the rescan did not
find the output at or above the start height. This
was observed to have cause a nil pointer dereference
when the returning line attempted to access the output.
This case is now handled by returning a distinct error
signaling that the output was not found.
This commit fixes a nasty bug that has been lingering within lnd, and
has been noticed due to the added retransmission logic. Before this
commit, upon a restart, if we had an active HTLC and received a new
commitment update, then we would re-forward ALL active HTLC’s. This
could at times lead to a nasty cycle:
* We re-forward an HTLC already processed.
* We then notice that the time-lock is out of date (retransmitted
HTLC), so we go to fail it.
* This is detected as a replay attack, so we send an
UpdateMalformedHTLC
* This second failure ends up creating a nil entry in the log,
leading to a panic.
* Remote party disconnects.
* Upon reconnect we send again as we need to retransmit the changes,
this goes on forever.
In order to fix this, we now ensure that we only forward HTLC’s that
have been newly locked in at this next state. With this, we now avoid
the loop described above, and also ensure that we don’t accidentally
attempt an HTLC replay attack on our selves.
Fixes#528.
Fixes#545.
In this commit, we add a new detailed error that’s to be returned
when/if the remote peer sends us an invalid commit signature. The new
error contains the transaction that we attempted to validate the
signature over, the sighs, and the state number. Returning this
additional information will serve to aide in debugging any
cross-implementation issues.
In this commit, add an additional return value to
CompleteCooperativeClose. We’ll now report to the caller our final
balance in the cooperative closure transaction. We report this as
depending on if we’re the initiator or not, our final balance may not
exactly match the balance we had in the last state.
This commit fixes a lingering bug that could at times cause
incompatibilities with other implementations when attempting a
cooperative channel close. Before this commit, we would use a pointer
to the funding txin everywhere. As a result, each time we made a new
state, or verified one, we would modify the sequence field of the main
txin of the commitment transaction. Due to this if we updated the
channel, then went to do a cooperative channel closure, the sequence of
the txin would still be set to the value we used as the state hint.
To remedy this, we now copy the txin each time when making the
commitment transaction, and also the cooperative closure transaction.
This avoids accidentally mutating the txin itself.
Fixes#502.
Previously, some methods on a LightningChannel like SettleHTLC and
FailHTLC would identify HTLCs by payment hash. This would not always
work correctly if there are multiple HTLCs with the same payment hash,
so instead we change these methods to identify HTLCs by their unique
identifiers instead.
Before this commit, during a reservation, we wouldn’t ever specify our
minHTL value. We don’t yet fully validate all channel constrains, but
doing this now serves to ensure that once those features are merged,
we’ll actually be setting a valid value for minHTLC.
In this commit, we extend the ProcessChanSyncMsg to detect a case where
we don’t have the necessary revocation window to send out a new commit.
This can arise if the remote party sends us a new state, but we haven’t
yet fully processed their FundingLocked message yet, so we would be
unable to create a new commitment state.
We fix this by enumerating each of our actions in the case of an error.
If we get ErrNoWindow, then this indicates that we can’t give the
remote party the commitment we would like to optimistically send over.
This isn’t an issue though, as in the next round, we’ll resynchronize
our state.
In this commit, we fix an existing bug that would cause issues within
the switch due to a value not being properly set. Before this commit we
would copy a byte array into a slice without first creating the
necessary capacity for that slice. To fix this, we’ll now ensure that
the blob has the proper capacity before copying over. Several tests
have been updated to always set a fake onion blob.
In this commit, we extend the initial check within SignNextCommitment
to bail out early if we don’t yet know the commitment point of the
remote party. This prevents a class of nil pointer panics if we attempt
to create a new state without yet having received the FundingLocked
message.
In this commit, we fix an existing bug within the EstimateFeePerWeight
method for the BtcdFeeEstimator. If the sat/byte value returned was too
low, then it was possible for us to end up with a zero valued
sat/weight. We correct this issue by detecting, and falling back to the
default fee rate if so.
In this commit, we fix an existing bug within our cooperative channel
closing transaction generation. Before this commit, we wouldn’t account
for the fee already allocated within the commitment transaction. As a
result, we would calculate the evaluated balance considering the fee
incorrectly. In this commit, we fix this by adding the commitment fee
to the balance of the initiator when crafting the closing transaction
In this commit, we fix an existing bug, as only the initiator needs to
validate any new fee updates. If the initiator sends an invalid fee,
then it will be rejected by the responder as it may put them below
their required reserve.
In this commit, we ensure that we reject any UpdateFee messages if
after applying the update, the initiator doesn’t have enough funds to
actually pay for the new commitment state.
A test has been added to exercise this new behavior.
In this commit, we update the retransmission logic to ensure that we
properly retransmit any sent UpdateFee messages as part of a state
transition. When creating a CommitDiff, if we have a pending fee
update, then we’ll add that to the set of logs updates. When restoring
the commit diff from disk, if we encounter an UpdateFee entry, then
we’ll apply that as waiting to be ACK’d and skip adding it as a log
entry.
A new test has been added to excessive this new behavior.
In this commit, we correct the BTC -> SAT conversion in
BtcdFeeEstimator. Previously, we use 10e8 instead of 1e8, causing us to
be off by an order of magnitude.
Adding 99 here didn’t really do anything but obfuscate when we were
trying to compute. We’re just using internet division to calculate 1%
of the channel capacity amount. This is the amount that the remote
party must remain above at all times.
In this commit, we add a new ResetState method to the channel state
machine which will reset the state of the channel to `channelOpen`. We
add this as before this commit, it was possible for a channel to shift
into the closing state, the closing negotiation be cancelled for
whatever reason, resulting the the channel held by the breachArbiter
unable to act to potential on-chain events.
In this commit, we fix an existing bug that had ramifications within
the operation of the lnd daemon. Before this commit, if the Stop()
method was called, then the closeObserver would exit as well. This
means that would no longer be watching for channel breaches on-chain,
and could miss either a cooperative channel closure or an actual
contract breach.
To fix this, we now introduce a new method to stop for closeObserver:
CancelObserver(). This should ONLY be called once either: the contract
has been fully settled on-chain, or whom ever is watching the relevant
signals has a newer version of the channel that it will watch instead.
In this commit, we modify CreateCloseProposal to no longer return the
same fee passed in. In the past, this method accepted a fee rat rather
than an absolute fee, and would return the computed absolute fee. Now
that the method takes the absolute fee directly, this is unnecessary.
In this commit, we modify the funding reservation workflow slightly to
allow callers to specify their own custom fee when initialization a
funding workflow. This gives power-users the ability to control exactly
how much in fees are paid for each new funding transaction.
In this commit, we extend the existing SendOutputs method on the
WalletController interface to be able to accept a custom fee. With
this, users are now able to specify their exact fee, allowing the
wallet to be fee estimation agnostic.
In this commit, we add a new implementation of the FeeEstimator
interface: the BtcdFeeEstimator. This implementation of the
FeeEstimator is backed by an active bcd instance. Any requests to query
for the current fee for a given confirmation target are proxied to this
active bcd instance.
In this commit, we extend the FeeEstimator methods to allow them to
return an error. This is required as most implementations aside from
the static fee estimator will want to be able to return errors to users
to indicate the inability to properly estimate fees.
In this commit, we move the FeeEstimator interface into a distinct file
as follow up commits will begin to flesh out the interface with
additional implementations.
Fix wrong calculation of overshot amount which causes coin select
function to go into infinite loop. If overshoot amount is calculated
by subtraction of totalSatoshis and amtNeeded than on the second
iteration of loop amtNeeded already include required fee inside, which
causes continuation of the coin selection loop.
In this commit, we add fully verification (other than checking the
commitment point matches after the fact) of the new optional fields
added to the lnwire.ChannelReestablish message. Two scenarios can
arise: we realize the remote party is on a prior state (and possibly
lost data), or we realize that *we* are on a prior state with the
remote party verifiably proving that they’re on a newer state.
In this commit we extend the set of fields populated within the
returned lnwire.ChannelReestablish to populate the optional data loss
fields. This entails included the commitment secret of the most
recently revoked remote commitment transaction and also our current
unrevoked commitment point.
In this commit, we update all the key derivation within the state
machine to account for the recent spec change which introduces a
distinct key for usages within all HTLC scripts. This change means that
the commitment payment and delay base points, are only required to be
online in the case that a party is forced to go to chain.
We introduce an additional local tweak to the keyring for the HTLC
tweak. Additionally, two new keys have been added: a local and a remote
HTLC key. Generation of sender/receiver HTLC scripts now use the local
and remote HTLC keys rather than the “payment” key for each party.
Finally, when creating/verifying signatures for second-level HTLC
transactions, we use these the distinct HTLC keys, rather than re-using
the payment keys.
In this commit, we modify the naming and comments of the routines that
create the sender/receiver HTLC scripts to denote that a set of
distinct keys are used. The scripts materially haven’t changed, but the
set of keys expected has.
In this commit we modify the primary InvoiceRegistry interface within
the package to instead return a direct value for LookupInvoice rather
than a pointer. This fixes an existing race condition wherein a caller
could modify or read the value of the returned invoice.
In this method we fix an existing deadlock within the unit tests when
running with the race condition detector on. We don’t need to grab the
mutex within the ProcessChanSyncMsg method as this should be the very
first method called when initializing the channel if a channel state
sync is needed.
In this commit we ensure that the channel is always able to exit by
adding a select statement with a quit case when we’re waiting on the
result of a job that was previously sent into the sigPool.
In this commit, we’ve added a set of unit tests to cover all enumerated
channel sync scenarios, including the case where both nodes deem that
they’re unable to synchronize properly.
In this commit we revert a prior commit
(5240953de02d281be694b2c87d151d6c7dce2cb5) which was added as a stop
gap before we added the proper state needed to recover from cases where
the commitment transactions of both chains had diverged slightly due to
asymmetric dust limits.
In this commit we do away with the existing availableLocalBalance
attribute and instead add a new, more accurate AvailableBalance method.
The new method will compute the available balance within the channel ,
assuming a new state was created at the instance the method was called.
This new method will now properly account for HTLC fees.
AvailableBalance is now called within AddHTLC in order to ensure we
don’t add any HTLC’s that are unable to be paid for from the PoV of the
fees on the commitment transaction.
We no longer need to manually pass in the channel delta to
AppendToRevocationLog (now called AdvanceCommitChainTail) as the
pointers on-disk will be updated atomically.
