In this commit, we modify the decoding of the FailUnknownPaymentHash
message to ensure we're able to fully decode the legacy serialization of
the onion error. We do this by catching the `io.EOF` error as it's
returned when _no_ bytes are read. If this is the case, then only the
error type was serialized and not also the optional amount.
In this commit, we fix a bug in the way we defined our even/odd features
for a particular feature. The check for if a feature bit is part of a
pair assumes that the pair bit has the exact same name as the bit being
queried. The way we defined our feature map didn't take note of this
assumption, as a result, any attempts to require a new bit moving from
optional to required would fail since the bit would be found, but the
names differed.
In this commit, we deprecate the `IncorrectHtlcAmount` onion error.
We'll still decode this error to use when retrying paths, but we'll no
longer send this ourselves. The `UnknownPaymentHash` error has been
amended to also include the value of the payment as well. This allows us
to worry about one less error.
In this commit, we add a field to the ChannelUpdate
denoting the maximum HTLC we support sending over
this channel, a field which was recently added to the
spec.
This field serves multiple purposes. In the short
term, it enables nodes to signal the largest HTLC
they're willing to carry, allows light clients who
don't verify channel existence to have some guidance
when routing HTLCs, and finally may allow nodes to
preserve a portion of bandwidth at all times.
In the long term, this field can be used by
implementations of AMP to guide payment splitting,
as it becomes apparent to a node the largest possible
HTLC one can route over a particular channel.
This PR was made possible by the merge of #1825,
which enables older nodes to properly retain and
verify signatures on updates that include new fields
(like this new max HTLC field) that they haven't yet
been updated to recognize.
In addition, the new ChannelUpdate fields are added to
the lnwire fuzzing tests.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
In this commit, we fix the problem where it's annoying to parse a
bitfield printed out in decimal by writing a String method for the
ChanUpdate[Chan|Msg]Flags bitfield.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
In this commit:
* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's
* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.
* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
In this commit we fix a compatibility issue with other implementations.
Before this commit, when writing out an onion error that includes a
`ChannelUpdate` we would use the `MaxPayloadLength` to get the length to
encode. However, a recent update has modified that to be the max
`brontide` payload length as it's possible to pad out the message with
optional fields we're unaware of. As a result, we would always write out
a length of 65KB or so. This didn't effect our parser as we ignore the
length and decode the channel update directly as we don't need the
length to do that. However, other implementations depended on the length
rather than just reading the channel update, meaning that they weren't
able to decode our onion errors that had channel updates.
In this commit we fix that by introducing a new
`writeOnionErrorChanUpdate` which will write out the precise length
instead of using the max payload size.
Fixes#2450.
In this commit, we ensure that when we read node aliases from the wire,
we ensure that they're valid. Before this commit, we would read the raw
bytes without checking for validity which could result in us writing in
invalid node alias to disk. We've fixed this, and also updated the
quickcheck tests to generate valid strings.
In this commit, we export the ReadElements and WriteElements functions.
We do this as exporting these functions makes it possible for outside
packages to define serializations which use the BOLT 1.0 wire format.
In this commit we add a check to HtlcSatifiesPolicy to verify that the
time lock for the outgoing htlc that is requested in the onion packet
isn't too far in the future.
Without this check, anyone could force an unreasonably long time lock on
the forwarding node.
This commit adds the required feature name to our
set of local known features. This will allow other
peers connecting to us to set the required gossip
queries feature bit. This is required for the
subsequent commits, which instruct the server to
set the bit depending on user configured preferences.
In this commit, we add a new field to all the existing gossip messages:
ExtraOpqueData. We do this, as before this commit, if we came across a
ChannelUpdate message with a set of optional fields, then we wouldn't be
able to properly parse the signatures related to the message. If we
never corrected this behavior, then we would violate the forwards
compatible principle we use when parsing existing messages.
As these messages can now be padded out to the max message size, we've
increased the MaxPayloadLength value for all of these messages.
Fixes#1814.
In this commit, we add a compatibility mode for older version of
clightning to ensure that we're able to properly parse all their channel
updates. An older version of c-lightning would send out encapsulated
onion error message with an additional type byte. This would throw off
our parsing as we didn't expect the type byte, and so we always 2 bytes
off. In order to ensure that we're able to parse these messages and make
adjustments to our path finding, we'll first check to see if the type
byte is there, if so, then we'll snip off two bytes from the front and
continue with parsing. if the bytes aren't found, then we can proceed as
normal and parse the request.
In this commit, we alter the behavior of the regular
short channel id encoding, such that it returns a nil
slice if the decoded number of elements is 0. This is
done so that it matches the behavior of the zlib
decompression, allowing us to test both in using the
same corpus.
Modifies the behavior of the quick test for
MsgQueryShortChanIDs, such that the generated
slice of expected short chan ids is always nil
if no elements are returned. This mimics the
behavior of the zlib decompression, where
elements are appended to the slice, instead of
assigning to preallocated slice.
In this commit, we add a new package level mutex. Each time we decode a
new set of chan IDs w/ zlib, we also grab this mutex. The purpose here
is to ensure that we only EVER allocate the maxZlibBufSize globally
across all peers. Otherwise, it may be possible for us to allocate up to
64 MB for _each_ peer, exposing an easy OOM attack vector.
In this commit, we implement zlib encoding and decoding for the channel
range queries. Notably, we utilize an io.LimitedReader to ensure that we
can enforce a hard cap on the total number of bytes we'll ever allocate
in a decoding attempt.
In this commit, we fix a slight bug in the parsing of encoded short
channel ID's. Before this commit, we would always assume that the remote
peer was sending us the sorted+encoded variant of the short channel
ID's. In the case that they weren't (as there isn't yet a feature bit),
we would assert this check and fail early as atm we don't support any
sort of compression.
In this commit, we add recognition of the data loss protected feature
bit. We already implement the full feature set, but then never added the
bit to our set of known features.
In this commit, we fix a minor deviation in our implementation from the
specification. Before if we encountered an unknown error type, we would
disconnect the peer. Instead, we’ll now just continue along parsing the
remainder of the messages. This was flared up recently by some
c-lightning related incompatibilities that emerged on main net.
In this commit, we modify lnwire.MilliSatoshi to be an unsigned
integer. We do this as all values within the specification are meant to
be unsigned unless otherwise specified. Our usage of signed integers to
this date has caused some compatibility issues with the other
implementations, so this is the first step to reconciling these
compatibility issues.
In this commit, we replace all instances of *btcec.PublicKey within the
announcement messages with a simple [33]byte. We do this as usually we
don’t need to immediately validate an announcement, therefore we can
avoid the scalar multiplications during decoding.
In this commit, we add a new signature type. We’ll use this type to
avoid fully decoding a signature on the wire into a btcec.Signature.
This type is only really needed when we need to do signature
validation, as a result, always encoding it is a waste. Several helper
methods have been added to the new struct in order to ensure that we
can use it in the existing codebase without substantial issues.
This commit adds the `lnnet` package which contains an
implementation of the newly created LightningNet interface which
multiplexes the Dial and DNS-related functions to use net
by default and torsvc if a flag is specified. This modularization
makes for cleaner code.
This commit alters the NodeAlias String method to trim null-bytes from
the end of the alias. This is helpful for presentation in contexts such
as the GetInfo response.
In this commit, we add additional detail in the error return hen were’e
unable to properly decode an encapsulated error. This additional
logging was added with the goal of being able to track down a lingering
bug, where at times lnd cannot decode a TemporaryChannelFailure
message.
This changes the circuit map internals and API to reference circuits
by a primary key of (channel ID, HTLC ID) instead of paymnet
hash. This is because each circuit has a unique offered HTLC, but
there may be multiple circuits for a payment hash with different
source or destination channels.
In this commit, we add a new type to the lnwire package:
ChanUpdateFlag. This type represent the bitfield that’s used within the
ChannelUpdate message to give additional details as how the message
should be interpreted.
In this commit we correct an off by one error on the Shutdown and
ClosingSigned message types. Additionally, we fix an error related to
the numbering of the UpdateFee message. With this we, gain proper
compatibility with the other implementations when it comes to
commitment hygiene, and also the cooperative closure process.
Early in the lifetime of the project here were a few files we either
copied entirely, or used as the basis for code within lnd. Before this
PR, this was not recognized by retaining the original copyright. With
this commit, we remedy that by explicitly noting the copyright in the
relevant files.
Fixes#423.
In this commit, we add support within lnwire for the optional dataloss
fields in ChannelReestablish. With these fields, it’s possible to:
verify that the remote node really knows of the state of our prior
local commitment, and also that they’ve sent us the current commitment
point for their current state.
In the event of dataloss, it’s possible for the party which lost data
to claim their commitment output in the remote party’s commitment if
they broadcast their current commitment transaction.
In this commit, we begin implementing the latest spec change to reduce
the attack surface on online channels. In this commit, we introduce a
distinct HTLC base point which will be used to sign the second-level
HTLC transactions for each active HLTC on the commitment transaction of
the remote node. With this, we allow the commitment key to remain
offline, as it isn’t needed in routine channel updates, unless we need
to go to chain.
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.
The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.
Also fix a few minor typos.
In this commit the reestablish message have been added, which serves as
channel state synchronization message. Before exchanging the messages
for particular channel peers have to send it to each other as the
first message in order to be sure that non of the updates have been
lost because of the previous disconnect.
In this commit we add a new type to the lnwire package: FundingFlag.
This type will serve as an enum to describe the possible flags that can
be used within the ChannelFlags field in the OpenChannel struct.
We also define the first assigned flag: FFAnnounceChannel, which
indicates if the initiator of the funding flow wishes to announce the
channel to the greater network.
This is a rewrite of feature vectors in lnwire. This has a few
benefits:
1) a simpler interface
2) separate structs for a plain set of feature bits and a feature
vector with associated feature names
their respective feature sets
3) loosened requirements that bits MUST be assigned in pairs
4) fix endianness of encoding/decoding
This commit fixes an incorrectly calculated size of a
*FeatureVector in the serializedSize() function. go-fuzz
found that when calling NewFeatureVectorFromReader, if
a flag is invalid, it is not added to f.flags. However,
it will skip the index that wasn't included. This
becomes a problem when serializedSize() calculates the
length of f.flags via len() which can lead to an index
out of range since certain flags may be missing.
