This commit fixes a race condition that was discovered as a result of
the new htlcswitch package. The StateSnapshot method and all of the
other methods which mutate the state of the channel state machine were
using distinct mutexes. The fix is trivial: all methods accessing the
internal channel state variable now use the same mutex.
add rhash to the payment descriptor when receiving the settle htlc in
order to be able to pass it during settle htlc packet generation and
later find the user pending payment by rhash without additional hashing.
In this commit we made state machine to be responsible for returning
proper available balance - amount of satoshi which we able to use at
current moment. This will help us in constrction channel link
abstraction.
In this commit severe bug have been fixed which allows the state of the
nodes to be desychnorinesed in the moments of high htlc flow. We limit
the number of the htlc which we can add to commitment transaction
to half of the available capcity. This change fixes the bug when
commimtment transaction on the verge of being full, in this case race
condition might occures and remote htlc will be rejected, but at the
same time they will be added on remote side, the same situiation will
happen with htlc we have added, which cause the commitment transactions
to be different.
This commit changes the cooperative channel close workflow to comply
with the latest spec. This adds steps to handle and send shutdown
messages as well as moving responsibility for sending the channel close
message from the initiator to the responder.
This commit modifies the fee calculation logic when creating or
accepting a new commitment transaction to use the set FeePerKw within
the channel rather then re-query the estimator each time. The prior
behavior was benign as we currently use a static fee estimator, but the
dynamic setting this could’ve caused a state divergence.
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
This commit adds the FeeEstimator interface, which can be used for
future fee calculation implementations. Currently, there is only the
StaticFeeEstimator implementation, which returns the same fee rate for
any transaction.
In order to cleanly handle shutdowns and restarts during state machine operation, the fee for the current
commitment transaction must be persisted. This allows the fee to be
reapplied when the current state is reloaded.
This commit modifies the actions of the closeObserver goroutine to
utilize a _new_ channel to send channel close details over. The
original close signal channel is still used to notify observers that a
channel _has_ been closed, but this new channel will provide a single
observer with details w.r.t _how_ a channel was closed.
This commit adds an additional field to the ForceCloseSummary that
allows observers of the channel that sends this struct to track _which_
channel the force close came from.
This commit improves the channel state machine by converting the
objective PendingUpdates method to a subjective FullySynced method
which is to be used in place of PendingUpdates. The new FullySynced
method is fully encompassing and replaces any upper state required by
the state machine which wraps this one.
The new FullySynced method is identical to PendingUpdates aside from
the fact that: it now also factors in the log message index of the
remote commitment chain, and also introduces a concept of an “owed
commitment”. A commitment chain owes a commitment if the height of the
local commitment chain is higher than that of the remote chain.
This commit removes the theirPrevPkScript field from the
LightningChannel struct all together. It’s no longer needed as the more
fundamental mutation bug has been fixed within the channel state
machine.
This commit fixes a class of bug that can arise in the channel state
machine when a very high throughput workflow is attempted. Since the
PaymentDescriptor’s within a commitment pointed directly into the log,
any changes to a payment descriptor would also be reflected in all
other ones. Due to this mutation possibility, at times, the
locateOutputIndex method would fail since the HTLC’s pkScript was
modified, causing the channel to fail.
We fix this class of bug by simply ensure that once an HTLC has been
associated with a particular commitment, then it becomes immutable.
This commit fixes a slight oversight in the current state machine which
assumes that both commitment chains are always at the same height. In a
future where we move back to allowing nodes to pipeline commitment
updates, this will not always be the case.
This commit fixes a lingering TODO within the wallet portion of the
codebase by properly adhering to the set dust limits when closing a
channel. With this new commit if a party’s current settled balance is
below their current dust-limit, then it will be omitted from the
commitment transaction.
The prior test that asserted negative outputs are rejected has been
removed as they’ll now be avoided by ensuring we omit dust outputs from
the commitment transaction.
This commit does some minor shuffling around and also adds some
additional comments to the restoreStateLogs method within the channel
state machine. After the latest merge in this area, the code has
diverged slightly from what’s considered typical within the rest of the
codebase.
It is possible that that there are multiple HTLCs with different values,
but the same public key script. As such, a check against the value should
be performed when looking for HTLC outputs in a commitment transaction.
Create a new helper method called genHtlcScript which will
generate the public key scripts for a supplied HTLC. This functionality
from addHTLC is removed, and addHTLC will instead call this new
method.
In restoreStateLogs we will regenerate the public key scripts for the
HTLCs with genHtlcScript and restore the proper values.
When an HTLC is either cancelled or settled we must properly set the
pkScript for the HTLC on the remote commitment, such that we can
generate a valid ChannelDelta.
Description of bug:
When calling ReceiveNewCommitment() we will progress through methods
fetchCommitmentView and addHTLC which will add HTLC outputs to the
commitment transaction in the local commitment chain and save the
pkScript to the relevant PaymentDescriptor which resides in the
corresponding updateLog. Finally the local commitment will be added
to the local commitment chain.
When the same user next calls SignNextCommitment we will again
progress through fetchCommitmentView and addHTLC. In addHTLC we will
now overwrite the pkScripts in the PaymentDescriptors with the
pkScript from the context of the remote commitment. When we later
call RevokeCurrentCommitment and proceed into toChannelDelta, we
will not be able to find the correct pkScript in the PaymentDescriptor
to match it against the outputs in the commitment transaction.
This will lead to the nested function locateOutputIndex returning
incorrect values.
Fixing the bug:
We introduce three new fields in PaymentDescriptor:
* ourPkScript
* theirPkScript
* theirPrevPkScript
ourPkScript will include the pkScript for the HTLC from the context
of the local commitment.
theirPkScript will take the value of the latest pkScript for the HTLC
from the context of the remote commitment.
theirPrevPkScript will take the second-latest pkScript for the HTLC
from the context of the remote commitment. This is the value we use
in toChannelDelta when we save a revoked commitment from our peer.
The appropriate value of these fields are set in the addHTLC method.
Additionally we pass a boolean value to toChannelDelta so we know
whether we are operating on a local or remote commitment and grab
the correct pkScript in locateUpdateIndex.
This commit removes all instances of the fastsha256 library and
replaces it with the sha256 library in the standard library. This
change should see a number of performance improvements as the standard
library has highly optimized assembly instructions with use vectorized
instructions as the platform supports.
If the value of the to-local output is below the dust limit, the
ForceCloseSummary should not include a sign descriptor for this output.
We also find the proper to-self output by looking for the expected public
key script and not assume that no HTLC outputs exist.
Currently non-HTLC outputs will be accepted in the commitment
transaction as long as it is non-zero. We change this by not allowing
outputs with a value lower than the dust limit. The value of such
an output will go towards transaction fees.
This commit fixes a class of bug that currently exists within the
cooperative closure methods for the channel state machine. As an
example, due to the current hard coded fees, if one of the outputs
generated within the generated closure transaction has a negative
output, then the initiating node would gladly forward this to the
remote node. The remote node would then reject the closure as the
transaction is invalid. However, the act of completing the closure
would cause the remote node’s state machine to shift into a “closed”
state. As a result, any further closure attempts by the first node
(force or regular) would go unnoticed by the remote node.
We fix this issue by ensuring the transaction is “sane” before
initiating of completing a cooperative channel closure.
At test case has been added exercising the particular erroneous case
reported by “moli” on IRC.
This commit avoids a class of bug wherein the state of the channel
would be marked as closing enough though an error occurred somewhere in
the function. The bug was due to the fact that the channel `status` was
shifted before any actual logic within the function(s) were executed.
We fix this bug by _only_ shifting the channel status once the function
has completed without any error.
This commit adds a new method to the channel’s state machine:
NextRevocationKey. This method is being added in preparation for the
upcoming change to switch to the commitment transaction format outlined
in the spec. When this comes to pass, the ExtendRevocationWindow method
will be removed, as it will no longer be needed.
The NextRevocationKey method will be needed as to conform to the spec,
we’ll need to send the next revocation key within the `fundingLocked`
message.
In this commit the initial implementation of revocation hash
generation 'elkrem' was replaced with 'shachain' Rusty Russel
implementation which currently enshrined in the spec. This alghoritm has
the same asymptotic characteristics but has more complex scheme
to determine wish hash we can drop and what needs to be stored
in order to be able to achive full compression.
Fix SetStateNumHint and GetStateNumHint to properly
set and get the stateNumHints using the lower 24 bits
of the locktime of the commitment transaction as the
lower 24 bits of the obfuscated state number and the
lower 24 bits of the sequence field as the higher 24
bits.
