In this commit, in order to allow the caller to specify the amount that
was ultimately accepted for an invoice, the SettleInvoice method has
gained a new parameter: amtPaid. SettleInvoice will now populate the
final amount paid in the database upon db commit.
In this commit, we move to explicitly storing a bit more information
within the invoice. Currently this information is already stored in the
payment request, but by storing it at this level, callers that may not
be in the state to fully decode a payment request can obtain this data.
We avoid a database migration by appending this data to the end of an
invoice. When decoding, we'll try to read out this extra information,
and simply return what we have if it isn't found.
This commit synchronizes the in-memory cache with the
on-disk state to ensure the waiting proof store is
externally consistent. Currently, there are scenarios
where the in-memory state is updated, and not reverted
if the write fails. The general fix is to wait to apply
modifications until the write succeeds, and use a
read/write lock to synchronize access with db operations.
In this commit, we fix an existing bug in the new graph query sync
feature. Before this commit, when a block is pruned, we would never
actually delete the update index entries. This is due to the fact that
we would attempt to delete the entries from the update index _after_ we
had already removed the edges from the update index.
We fix this by simply swapping the order: first we delete from the
update index, then we delete the edges themselves. A test ensuring that
the entires are cleared (which failed before this commit), has been
added.
In this commit, we go through the codebase looking for TCP address
assumptions and modifying them to include the recently introduced onion
addresses. This enables us to fully support onion addresses within the
daemon.
In this commit, we modify the waiting proof slightly to acept dupliacte
waiting proofs, rather than reject them. Otherwise, it's possible that
the remote node first sends us their half of the waiting proof (before
we do), we write that to disk, then upon restart, we'll try to add it
again, but be rejected by the system.
Fixes#1315.
In this commit, we ensure that all indexes for a particular channel have
any relevant keys deleted once a channel is removed from the database.
Before this commit, if we pruned a channel due to closing, then its
entry in the channel update index would ever be removed.
In this commit, we add a new database migration required to update old
database to the version of the database that tracks the update index for
the nodes and edge policies. The migration is straight forward, we
simply need to populate the new indexes for the all the nodes, and then
all the edges.
In this commit, we add a series of methods, and a new database index
that we'll use to implement the new discovery.ChannelGraphTimeSeries
interface interface. The primary change is that we now maintain two new
indexes tracking the last update time for each node, and the last update
time for each edge. These two indexes allow us to implement the
NodeUpdatesInHorizon and ChanUpdatesInHorizon methods. The remaining
methods added simply utilize the existing database indexes to allow us to
respond to any peer gossip range queries.
A set of new unit tests has been added to exercise the added logic.
The pending state definitin in ChannelCloseSummary was slightly changed
in such a way that channels that has had their commitment broadcasted
now is no longer considered "pending close". They now instead stay in
the open chan bucket with the ChanStatus "CommitmentBroadcasted" until
their commitment is confirmed. This commit updates the IsPending godoc
to reflect this.
In this commit, we modify the existing updateChanBucket function to no
longer auto-create buckets if they don't exist. We do this in order to
fix a class of bug that could arise wherein after a channel has actually
be closed (and the parent buckets removed) a method that mutates the
channel state is called, which then re-creates the relevant set of
buckets. As a result, subsequent calls to any RPCs which need to read
all the channels will fail as most of the fields won't actually be
populated.
After this commit, the fullSync method is the only one that's able to
create the full bucket hierarchy.
In this commit, we extend the CloseChannelSummary by also storing: the
current unrevoked revocation for the remote party, the next pending
unused revocation, and also the local channel config. We move to store
these as the provide an extra level of defense against bugs as we'll
always store information required to derive keys for any current and
prior states.
This commit adds a new method FetchWaitingCloseChannels to the database,
used for fetching OpenChannels that have a ChanStatus != Default. These
are channels that are borked, or have had a commitment broadcasted, and
is now waiting for it to confirm.
The fetchChannels method is rewritten to return channels exclusively
based on wheter they are pending or waitingClose.
This commit changes the bool `IsBorked` in OpenChannel to a `ChanStatus`
struct, of type ChannelStatus. This is used to indicated that a channel
that is technically still open, is either borked, or has had a
commitment broadcasted, but is not confirmed on-chain yet.
The ChannelStatus type has the value 1 for the status Borked, meaning it
is backwards compatible with the old database format.
Modifies TestFetchPendingChannels to verify that calls to
MarkAsOpen also modify the in-memory state. Previously we
only tested the persistent state loaded immediately after.
Modifies the MarkAsOpen operation to also update the
ShortChanID and IsPending fields in-memory. Before,
only the on-disk representation was updated, which
may have lead to stale data channel states being
passed in-memory.
In this commit, we remove references to raw keys from the main
ChannelConfig struct and instead replace it with usage of
keychain.KeyDescriptor. We do this, as the ChannelConfig as it stands
is a near complete static description of a channel. In the future, it
will be possible to export these static descriptions as backups. We
prefer the KeyDescriptor of a plain PublicKey, as the KeyLocator
portion of the struct allows a stateless signer to re-derive the keys
as needed when signing.
In this commit, we add a new storage namespace to channeldb: the
ForwardingLog. This log will be used by higher level sub-systems to log
each successfully completed HTLC. Each payment circuit will be
summarized as a “ForwardingEvent”. A series of events can then be
queried via a time slice query. In a time slice query, the caller
specifies a time range, a number of events to skip, and the max number
of events to return. Each query will return the index of the final
item. As we have a max number of events we’ll return in a response,
callers may need to use this last offset index to seek further by
skipping that number of entries. Combining these fields, callers are
able to query the time series, skipping an arbitrary amount of events,
and capping the max number of returned events.
In this commit, we made a series of modification to the way we handle
reading edges and vertexes from disk, in order to reduce the amount of
garbage generated:
1. Properly use PubKeyBytes are required rather than PubKey()
2. Return direct structs rather than pointers, and leave it to the
runtime to perform escape analysis.
3. In-line the former readSig() method when reading sigs from disk.
This commit changes the definition of the
constraints in the ChannelConstraints struct
to specify that these are all constraints the
*owner* of the set of constraints must *never
violate*.
This is done to make it easier to check that
a particular node is not violating any
constraint for a gien update, as before it
could violate constraints found both in its
local and the remote contraints.
In this commit, we make an API change that’s meant to reduce the amount
of garbage we generate when doing pathfinding or syncing nodes with our
latest graph state. Before this commit, we would always have to fully
decode the public key and signatures when reading a edge or vertex
struct. For the edges, we may need several EC operations to fully
decode all the pubkeys. This has been seen to generate a ton of
garbage, as well as slow down path finding a good bit.
To remedy this, we’ll now only ever read the *raw* bytes from disk. In
the event that we actually need to verify a signature (or w/e), only
*then* will we fully decode everything.
This commit adds Tor support. Users can set the --TorSocks flag
to specify which port Tor's SOCKS5 proxy is listening on so that
lnd can connect to it. When this flag is set, ALL traffic gets
routed over Tor including DNS traffic. Special functions for
DNS lookups were added, and since Tor doesn't natively support
SRV requests, the proxySRV function routes connects us to
a DNS server via Tor and SRV requests can be issued directly
to the DNS server.
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Before this commit, we’d unnecessarily use a write transaction within
the FetchChannelEdgesByOutpoint. This is wasteful as the function only
actually reads items from the database, and doesn’t attempt any
mutations at all.
Fixes#481.
Prior to this commit, payments stored in the channel DB only kept a
record of the payment hash. This is a problem as the preimage is what
serves as proof of payment and a user should be able to look up this
value in the future (not just immediately after payment).
Instead of storing both the payment hash and the preimage, we store the
preimage only since the hash can be derrived from this using a SHA256.
In the RPC listpayments command, we now give the preimage in addition to
the payment hash.
This commit adds a FetchClosedChannel method to the
channeldb, which allows querying based on a known
channel point. This will be used in the nursery to
load channel close summaries, which can be used to
provide more accurate height hints when recovering
from failures.
In this commit, we add the WitnessCache sub-storage system of the
greater database. The WitnessCache is a persistent cache of all
witnesses we’ve encountered on the network. We’ll use this cache to
share any on-chain discoveries between active channels. Eventually
we’ll also use this to enforce the variant that a preimage is only to
be used ONCE on the network.
This commit adds the ChannelFlags field, of type
lnwire.FundingFlags, to the OpenChannel struct,
including serialization for database storage.
This is done to preserve the flags that were
sent during channel opening, currently used
to determine whether a channel should be made
public or not after opening.
In this commit, we fix an existing bug that arose due to incorrectly
crafting the key we use to store channel commitments. Before this
commit, we tried to copy to a slice that hadn’t been allocated yet. As
a result, the key would only have the 0x00 or 0x01 as its value. We fix
this by properly crafting the key using the built-in append function.
In this commit, we fix an existing bug wherein if we closed two
channels, then we were unable to read the channel state afterwards as
we deleted the enclosing bucket.
In this commit, we fix an existing bug wherein we failed to update the
channels state once we accepted a new commitment. As a result, after a
state transition, if the channel state was read from disk, values like
TotalMSatSent wouldn’t be properly updated.
In this commit we’ve extended the TestChannelStateTransition method to
exercise the new state transition related messages. This includes
ensuring that when we add a new dangling commitment, and then the
remote party revokes it, then the on-disk state is update accordingly.
In this commit, we update the CloseChannel method to respect the new
on-disk bucket based structure. Additionally, we now ensure that we
delete the new chainBucket.
In this commit, in addition to the renaming we’ve modified the behavior
of AdvanceCommitChainTail as follows: this method now will simply
atomically advance the commitment tail, set the new commitment to the
prior dangling commitment, and update the on-disk revocation log.
The macho expects the new revocation state to already be stored within
the channel. This method is to be called once the remote party revokes
their current commitment state.
In this commit, we add a new method: RemoteCommitChainTip. This method
allows callers to poll the database state to check if we have an
un-acked commitment for the remote party. If so, then it should be
retransmitted once a communication channel has been re-established with
the channel peer. This method will return ErrNoPendingCommit if we
don’t currently have a dangling commitment.
In this commit, we add a new method AppendRemoteCommitChain. This
method is meant to be used once we extend a new state to the remote
party, but before we actually transmit the CommitSig message. With this
method, we store a fully valid CommitDiff on disk which can be used in
the case that we need to retransmit the state to the party as they
didn’t fully receive it.
In this commit we finalized the structure of the CommitDiff struct by
adding a set of LogUpdates, and also a valid CommitSig message.
The LogUpdate struct houses a messages that were transmitted and
locked-in with the new commitment state. We include the LogIndex along
with the wire messages itself in order to be able to properly
reconstruct the update log upon restart.
The CommitSig message included should be transmitted after the set of
LogUpdates, and fully covers the new commitment state and any new (or
already present) HTLC’s that were included as part of the state.
In this commit, we modify the UpdateCommitment method to accept a full
ChannelCommitment rather than a new transaction, the sig, and a
ChannelDelta. This new structure of this method also takes advantage of
the new bucket structure of the storage schema. Additionally, this
method will now atomically swap in the new passed commitment to point
to the LocalCommitment value within the struct.
In this commit we add a new MarkAsOpen method to the OpenChannel
struct. This method replaces the existing MarkChannelAsOpen method
which targeted the database struct itself.
