Commit Graph

301 Commits

Author SHA1 Message Date
Johan T. Halseth
241e21a0d1
itest: use hex encoded hash in error message 2020-12-10 14:24:18 +01:00
Johan T. Halseth
09f2307d14
itest: increase htlc amt for local force close tests
Since the tests set a quite high fee rate before the node goes to chain,
the HTLCs wouldn't be economical to sweep at this fee rate.

Pre sweeper handling of the second-level transactions this was not a
problem, since the fees were set when the second-levels were created,
before the fee estimate was increased.
2020-12-10 14:24:18 +01:00
Oliver Gugger
a08d6c469f
itest: update and sort error whitelist 2020-12-09 09:06:14 +01:00
Oliver Gugger
af0f39f4a6
itest: fix log whitelist check
Because a previous PR changed the location of the itest log files, we
also need to update the script that looks for non-whitelisted errors.
2020-12-09 08:06:16 +01:00
Conner Fromknecht
2f38a7ce9c
itest: increase recovery payment amount so htlc isn't dust 2020-12-08 14:55:40 -08:00
Oliver Gugger
9de659ea4f
itest: use require.Eventually where tick speed matters
To not waste a lot of time with the adjusted longer tick interval, we
use a short interval with require.Eventually where we can save some
time.
2020-12-08 21:40:37 +01:00
Oliver Gugger
809d238364
itest: wait for server to start when restoring
To avoid running into the "server is still starting" error when trying
to close a channel, we first wait for the error to disappear before we
try closing the actual channel.
2020-12-08 21:40:31 +01:00
Oliver Gugger
cdcbc0376d
lntest: replace hard coded timeouts
This commit replaces most of the hard coded 10, 15, 20 and 30 second
timeouts with the default timeout. This should allow darwin users to
successfully run the parallel itests locally as well.
2020-12-08 21:37:12 +01:00
Oliver Gugger
4d2a12e552
itest: fix incorrect error message 2020-12-08 21:37:10 +01:00
Conner Fromknecht
123c3a2530
itest: defer shutdown of nodes in main test method
This ensures that the nodes will properly be shutdown even if one fails
to start or any of them fail to connect. Previously the shutdown is
defered only in the event that the setup was successful.
2020-12-03 23:06:32 -08:00
Conner Fromknecht
374725842e
itest: use fresh alice and bob for fwd interceptor tests 2020-12-03 23:06:32 -08:00
Conner Fromknecht
92b820a6d1
itest: move to require in forward_interceptor_test
Certain checks were implemented with Errorf, which only logs the
failure. This results in the test harness panicking further down. We go
further ahead and convert all calls in this file to use require.
2020-12-03 23:06:29 -08:00
Oliver Gugger
36756c012d
lntest: use nextAvailablePort for miner and btcd backend
With the new btcd version we can specify our own listen address
generator function for any btcd nodes. This should reduce flakiness as
the previous way of getting a free port was based on just picking a
random number which lead to conflicts.
We also double the default values for connection retries and timeouts,
effectively waiting up to 4 seconds in total now.
2020-12-03 11:30:23 +01:00
Oliver Gugger
2edc3cf98f
multi: update to latest btcd version
With this commit we update btcd to the latest version which allows us to
specify the btcd binary we want to use when spinning up a new node.
2020-12-03 11:30:22 +01:00
Oliver Gugger
0a4962a18e
itest: run sub itests correctly
To avoid the "Error outside of test" log and to properly terminate the
test if a sub test fails, we need to correctly invoke them using the
RunTestCase method.
2020-12-01 22:24:03 +01:00
Olaoluwa Osuntokun
94f8311667
Merge pull request #4782 from cfromknecht/anchor-wtserver
watchtower: anchor channel support
2020-11-30 17:49:32 -08:00
Olaoluwa Osuntokun
7e298f1434
Merge pull request #3367 from cfromknecht/batched-graph-updates
Batched graph updates
2020-11-25 18:40:40 -08:00
Conner Fromknecht
82a238317c
lncfg+itest: expose configurable batch-commit-interval
This will permit a greater degree of tuning or customization depending
on various hardware/environmental factors.
2020-11-25 16:45:25 -08:00
Olaoluwa Osuntokun
4e079d1d20
lntest/itest: fix SendToRoute in UpdateChanPolicy test
It needs to include the MPP payload  now.
2020-11-25 16:32:15 -08:00
Olaoluwa Osuntokun
7fdf46ea4e
lntest/itest: update SendToRoute tests to include payment addr 2020-11-25 16:32:09 -08:00
Olaoluwa Osuntokun
d996607470
routing+lnrpc: extend BuildRoute to accept raw payAddr
In this commit, we extend the `BuildRoute` method and RPC on the router
sub-server to accept a raw payment address which will be included as
part of an MPP payload for the finla hop. This change actually also
allows users to craft their own MPP paths using BuildRoute+SendToRoute.
Our primary goal however, was to fix some broken itests since we now
require the payAddr to be present for ALL payments other than key send
payments.
2020-11-25 16:32:02 -08:00
Conner Fromknecht
b28bbc3223
wtclinet+itest: expose anchor client via rpc + add itest 2020-11-25 16:16:47 -08:00
Andras Banki-Horvath
5f3b800630
lint: fix error reported by the linter 2020-11-18 15:34:46 +01:00
Andras Banki-Horvath
369ae5e372
itest: move all test db files when using both etcd and bbolt
In some tests we moved channeld.db to a temp location in order to
"time travel". This commit extends the existing semantics by moving all
files, including embedded etcd db too besides the channeld.db file.
2020-11-18 15:34:45 +01:00
Andras Banki-Horvath
98342433ab
itest: add etcd flag to control if new lnd nodes should run on etcd 2020-11-18 15:34:44 +01:00
carla
887ff442db
multi: fix verbose output for listsweeps and check all against wallet
Previously, the verbose output of listsweeps would fail if we did not
find some sweeps in our wallet's listtransactions output. This could be
the case for sweeps that were rbf-ed, so the endpoint would fail. This
commit also updates the listsweeps endpoint to always check against the
wallet, so that we do not return these discarded sweeps that never
confirmed.
2020-11-13 13:59:52 +02:00
Andras Banki-Horvath
38e8184926
itest: update error log whitelist 2020-11-12 09:17:53 +01:00
Andras Banki-Horvath
9eac0dd3c9
itest: fix crash in parallel macaroon tests 2020-11-12 09:17:52 +01:00
Andras Banki-Horvath
979c8497b2
itest: add icase to node log filename + restart nodes before each icase
This commit adds the icase name to the log filename, to make it simpler
to find problematic tests. Additionally after this commit we'll restart
Alice and Bob (the base harness nodes) before each icase to start with a
clean state.
2020-11-12 09:17:52 +01:00
Andras Banki-Horvath
d6c2ee1bbf
itest: use require.NoError in TestLightningNetworkDaemon 2020-11-12 09:17:47 +01:00
Olaoluwa Osuntokun
99b0913562
Merge pull request #3672 from breez/invoice-hints
Allow user specify routing hints in private invoice.
2020-11-11 19:57:49 -08:00
Oliver Gugger
47e8882480
make+itest: allow the same test to be run in parallel 2020-11-10 13:57:31 +01:00
Oliver Gugger
24adf475ce
lnd_test: add integration tests for stateless init 2020-11-07 11:24:35 +01:00
Roei Erez
4463a4ce17 invoicerpc: Allow user specify routing hints. 2020-11-06 17:54:20 +02:00
Oliver Gugger
a606f462bc
itest: move longest test to beginning
To make sure the test that takes the longest overall time is always
started first, independent of the number of test tranches we run, we
move it to the beginning of the list. Because that test involves a lot
of waiting, it allows us to play around with the number of tranches more
efficiently.
2020-11-04 11:03:37 +01:00
Oliver Gugger
e6c47294fb
itest: fix typo and formatting 2020-11-04 11:03:36 +01:00
Oliver Gugger
ea4bb5dc5c
itest: fix chanbackup restore flake
Updating the fee of the mock estimator _after_ starting carol turned out
to be flaky and could lead to the new fee not being picked up in time
for the force close. That lead to carol not cpfp'ing the force closed
transaction.
2020-11-04 11:03:34 +01:00
Oliver Gugger
ca7564e4b4
itest: add flags for lnd executable 2020-11-04 11:03:31 +01:00
Oliver Gugger
f358a4474d
lntest: add log dir flag 2020-11-04 11:03:30 +01:00
Oliver Gugger
9bbf134237
itest: split tests into dynamic tranches 2020-11-04 11:03:29 +01:00
Eugene
225390ab5b
Merge pull request #4487 from Crypt-iQ/cc_pkg_0723
chainreg: new chainreg package
2020-10-30 06:07:26 -04:00
Eugene
bebe258e2d chainregistry+lnd: moving chainregistry+chainparams to new package 2020-10-29 15:24:14 -04:00
Matheus Degiovani
835c73632b
itest: fix off-by-one mining tests
This fixes tests that were surfaced as flaky.  Usually these tests had
an off-by-one error when mining blocks while waiting for a
CSV-encumbered output.
2020-10-28 14:48:15 -03:00
Oliver Gugger
098598ec74
itest: sort error whitelist 2020-10-28 14:35:11 +01:00
Oliver Gugger
fd684a8ffa
itest: add new errors to whitelist 2020-10-28 14:35:10 +01:00
Oliver Gugger
34439fbc2a
itest: cleanup multi-hop tests
As a preparation to fix an issue with the mempool wait, we clean up the
multi-hop itests a bit. We fix the formatting, use the require library
for assertions consistently and simplify some of the wait predicates.
Commonly used code is also extracted into functions.
2020-10-28 13:38:04 +01:00
Oliver Gugger
d1b46211d8
itest: replace WaitForTxBroadcast with WaitForTxInMempool 2020-10-28 13:29:18 +01:00
Oliver Gugger
1714394add
itest: fix send payment flake
In some cases the router isn't yet fully aware of all newly opened
channels. We need to give it some time to process the updates. Therefore
we add a wait for sending payments to give it a few more changes to
catch up.
2020-10-28 13:22:48 +01:00
Oliver Gugger
e6b0141b10
itest: fix typos, formatting 2020-10-28 13:22:48 +01:00
Matheus Degiovani
16a4687718
itest: Fix flakes when payments cause chan closure
This fixes itest flakes that happen when a payment is attempted that
ends up causing a channel closure.

completePaymentRequests() attempts to monitor the open channels after a
payment is attempted in order to identify that payment was actually
dispatched to a remote node before returning.

However, when the payment actually causes a channel closure (for
example, because the receiver sent an incorrect preimage) this logic
fails in that the channel will no longer the found in the list of open
channels. This could cause a flake when there was enough time for the
channel to close before performing the check.

One example of such a flaky test is failing_link.

This fixes the issue by also checking whether the total number of
channels was reduced, which indicates (assuming itest operations are
being executed serially) that one of the attempted payments affected at
least one channel.
2020-10-27 08:07:49 -03:00