Commit Graph

217 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
23cc8389f2
multi: add TLV awareness to htlcswitch, pass extra EOB to the invoice registry
In this commit, we update the `HopIterator` to gain awareness of the new
TLV hop payload. The default `HopIterator` will now hide the details of
the TLV from the caller, and return the same `ForwardingInfo` struct in
a uniform manner. We also add a new method: `ExtraOnionBlob` to allow
the caller to obtain the raw EOB (the serialized TLV stream) to pass
around.

Within the link, we'll now pass the EOB information into the invoice
registry. This allows the registry to parse out any additional
information from the EOB that it needs to settle the payment, such as a
preimage shard in the AMP case.
2019-08-22 18:53:05 -07:00
Olaoluwa Osuntokun
2f8d3c4526
Merge pull request #3256 from joostjager/failure-attribution
routing: failure attribution
2019-08-20 16:53:56 -07:00
Joost Jager
67e40d4433
htlcswitch: always assume an onion error for malformed htlc failures
Previously a temporary channel failure was returning for unexpected
malformed htlc failures. This is not what we want to communicate to the
sender, because the sender may apply a penalty to us only.

Returning the temporary channel failure is especially problematic if we
ourselves are the sender and the malformed htlc failure comes from our
direct peer. When interpretating the failure, we aren't able to
distinguish anymore between our channel not having enough balance and
our peer sending an unexpected failure back.
2019-08-17 10:24:05 +02:00
Joost Jager
4dd054ae90
multi: remove debug invoices
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.

Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
2019-08-14 21:33:03 +02:00
Joost Jager
98fac9fb99
htlcswitch+invoices: always return incorrect_or_unknown_payment_details
In order to prevent information leaks by nodes probing with a payment
hash, this commit changes exit hop processing so that it always returns
incorrect_or_unknown_payment_details and leaves the prober in the dark
about whether an invoice actually exists.
2019-08-08 11:04:23 +02:00
Joost Jager
922f133fd2
htlcswitch: report incoming htlc time lock with FinalIncorrectCltvExpiry
Previously the time lock in the onion payload was reported. This is no
new information to the sender.
2019-08-08 11:04:21 +02:00
Joost Jager
45b3c647f7
htlcswitch: return final_incorrect_htlc_amount on onion payload mismatch
This commit fixes exit hop behavior to be in line with the lightning
spec.
2019-08-08 11:04:19 +02:00
Joost Jager
aabd68ebcd
multi: rename FailUnknownPaymentHash to FailIncorrectDetails
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
2019-08-08 11:04:17 +02:00
Wilmer Paulino
24ca962f75
htlcswitch: lower max outgoing cltv expiry to one week worth of blocks
The current value was based on the previous default CLTV delta of 144
blocks. This has been lowered to 40 since lnd v0.6.0-beta, making the
current value of 5000 blocks a bit high. Lowering it to one week should
be more than enough to account for the other major lightning
implementations. Eclair currently has a default CLTV delta of 144, while
c-lightning's is 14.
2019-07-26 18:06:40 -07:00
Wilmer Paulino
87ff463abd
htlcswitch+lnd: make max cltv expiry configurable 2019-07-26 18:05:58 -07:00
nsa
00814dc7c1 htlcswitch: pipeline settles to switch
This commit makes the outgoing link pipeline the settle to the
switch as soon as it receives it. Previously, it would wait for a
revocation before sending it, which caused increased latency on
payments as well as possibly never settling on the incoming link.
A duplicate settle is still sent to the switch, but it is handled
gracefully. A new AckEventTicker was added to the switch which
acknowledges any pending settle / fail entries in an outgoing
link's fwd pkgs in batch. This was needed in order to reduce the
number of db txn's which would have been incurred by acking whenever
we receive a duplicate settle without batching.
2019-07-18 17:20:40 -04:00
Joost Jager
c6f9517e48
lnwire+htlcswitch: only use references for failure messages
Methods on failure message types used to be defined on value receivers.
This allowed assignment of a failure message to ForwardingError both as
a value and as a pointer. This is error-prone, especially when using a
type switch.

In this commit the failure message methods are changed so that they
target pointer receivers.

Two instances where a value was assigned instead of a reference are
fixed.
2019-07-11 19:49:47 +02:00
Conner Fromknecht
851c070595
htlcswitch/link: fix Min/MaxFeeUpdateTimeout godocs 2019-06-13 19:54:18 -07:00
Conner Fromknecht
c41017610b
htlcswitch/link: backup revoked states to watchtower 2019-06-13 19:54:18 -07:00
Olaoluwa Osuntokun
5f0fad85be multi: address lingering TODO by no longer wiping out local HTLCs on remote close
In this commit, we fix a lingering TOOD statement in the channel arb.
Before this commitment, we would simply wipe our our local HTLC set of
the HTLC set that was on the remote commitment transaction on force
close. This was incorrect as if our commitment transaction had an HTLC
that the remote commitment didn't, then we would fail to cancel that
back, and cause both channels to time out on chain.

In order to remedy this, we introduce a new `HtlcSetKey` struct to track
all 3 possible in-flight set of HTLCs: ours, theirs, and their pending.

We also we start to tack on additional data to all the unilateral close
messages we send to subscribers. This new data is the CommitSet, or the
set of valid commitments at channel closure time. This new information
will be used by the channel arb in an upcoming commit to ensure it will
cancel back HTLCs in the case of split commitment state.

Finally, we start to thread through an optional *CommitSet to the
advanceState method. This additional information will give the channel
arb addition information it needs to ensure it properly cancels back
HTLCs that are about to time out or may time out depending on which
commitment is played.

Within the htlcswitch pakage, we modify the `SignNextCommitment` method
to return the new set of pending HTLCs for the remote party's commitment
transaction and `ReceiveRevocation` to return the latest set of
commitment transactions on the remote party's commitment as well. This
is a preparatory change which is part of a larger change to address a
lingering TODO in the cnct.

Additionally, rather than just send of the set of HTLCs after the we
revoke, we'll also send of the set of HTLCs after the remote party
revokes, and we create a pending commitment state for it.
2019-05-27 14:34:13 -07:00
Joost Jager
064e8492de
cnct+htlcswitch+invoices: move invoice parameter check out of link
This commit is the final step in making the link unaware of invoices. It
now purely offers the htlc to the invoice registry and follows
instructions from the invoice registry about how and when to respond to
the htlc.

The change also fixes a bug where upon restart, hodl htlcs were
subjected to the invoice minimum cltv delta requirement again. If the
block height has increased in the mean while, the htlc would be canceled
back.

Furthermore the invoice registry interaction is aligned between link and
contract resolvers.
2019-05-15 14:42:12 +02:00
Olaoluwa Osuntokun
a8fa4094ba
Merge pull request #3027 from Roasbeef/new-onion-structs
router+build: update to the latest version of lightning-onion
2019-05-03 13:30:41 -07:00
Joost Jager
f5f6a52ed8
htlcswitch: check channel policy for local htlcs 2019-05-03 12:22:36 +02:00
Joost Jager
e571532d9a
htlcswitch: reorder policy checks
This commit reorders the policies check as a preparation for splitting
the checks in separate sets for the incoming and outgoing htlc.
2019-05-03 12:22:33 +02:00
Olaoluwa Osuntokun
649e080da6
htlcswitch: for UpdateFailMalformedHTLC packets mark fail as needing conversion
In this commit, we start the first phase of fixing an existing bug
within the switch. As is, we don't properly convert
`UpdateFailMalformedHTLC` to regular `UpdateFailHTLC` messages that are
fully encrypted. When we receive a `UpdateFailMalformedHTLC` today,
we'll convert it into a regular fail message by simply encoding the
failure message raw. This failure message doesn't have  a MAC yet, so if
we sent it backwards, then the destination wouldn't be able to decrypt
it. We can recognize this type of failure as it'll be the same size as
the raw failure message max size, but it has 4 extra bytes for the
encoding. When we come across this message, we'll mark is as needing
conversion so the switch can take care of it.
2019-04-30 20:13:34 -07:00
Olaoluwa Osuntokun
5d68f0f9eb
htlcswitch: only perform CLTV checks for HTLCs with open invoices
In this commit, we fix a bug that would cause a node with a hodl HTLC to
cancel back the HTLC upon restart if the invoice has been settled, but
the HTLC is still present on the commitment transaction. A fix for the
HTLC still being present (not triggering a new commitment) has been
fixed recently. However, for older nodes with a lingering HTLC, on
restart it would be failed back.

In this commit, we make the check stricter by only performing these
checks for HTLCs that are in the open state. This ensures that we'll
only check this constraints the first time around, before the HTLC has
been transitioned to the accepted state.
2019-04-11 17:53:25 -07:00
Conner Fromknecht
057bed2b92
htlcswitch/link: delay restored channel reestablish
This commit adds a brief delay when sending our channel reestablish
message if the link contains a restored channel to ensure we first have
a stable connection. Sending the message will cause the remote peer to
force close the channel, which currently may not be resumed reliably if
the connection is being torn town simultaneously. This delay can be
removed after the force close is reliable, but in the meantime it
improves the reliability of successfully closing out the channel and
allows the `channel_backup_restore/restore_during_creation` to pass
reliably.
2019-04-11 15:42:02 -07:00
Olaoluwa Osuntokun
bc425b1a77
Merge pull request #2918 from joostjager/hodl-drop-fix
htlcswitch: ensure commit tx gets updated after settle hodl invoice
2019-04-11 15:38:56 -07:00
Olaoluwa Osuntokun
5ac9ba6472
htlcswitch: synchronously send the chan sync message to the remote peer
In this commit, we modify the starting link logic to always send the
chan sync message to the remote peer in a synchronous manner. Otherwise,
it's possible that we fail very quickly below this block, and don't ever
send the message to the remote peer.
2019-04-10 18:01:52 -07:00
Joost Jager
6d2dfed03d
htlcswitch: increase batch counter for exit hop settle and fail
The idea of the batch counter is to increase it for commit tx updates,
so that if the commit tx cannot be updated immediately (revocation
window exhausted), the batch ticker makes sure it happens later.

The batch counter was increased for forwarded htlcs, but not for exit hop
resolutions.

This lead to the situation where the commitment tx would not be updated,
even though the htlc was settled locally. When no other changes happen
on the channel, the htlc eventually reaches its expiry and the channel
is force closed.
2019-04-10 21:04:51 +02:00
Joost Jager
038ce342b3
htlcswitch: do not check final cltv for accepted invoices 2019-04-08 18:16:21 +02:00
Joost Jager
037913fd28
link: rewrite height comparisons without subtraction
Prevent the case where a uint32 wrap around could happen.
2019-04-05 11:36:10 +02:00
Joost Jager
ab4da0f53d
cnct: define separate broadcast delta for outgoing htlcs
This commits exposes the various parameters around going to chain and
accepting htlcs in a clear way.

In addition to this, it reverts those parameters to what they were
before the merge of commit d1076271456bdab1625ea6b52b93ca3e1bd9aed9.
2019-04-05 11:36:07 +02:00
Olaoluwa Osuntokun
893cff60c4
Merge pull request #2839 from joostjager/htlc-expiry-check
link: increase expiry grace delta for exit hop and forwarded htlcs
2019-04-01 18:15:56 -07:00
Olaoluwa Osuntokun
1afec1342b
htlcswitch: update syncChanStates for new ChanSyncMsg API 2019-03-28 17:53:56 -07:00
Joost Jager
cd535b9401
link: increase expiry grace delta
This commit increase the expiry grace delta to a value above the
broadcast delta. This prevents htlcs from being accepted that would
immediately trigger a channel force close.

A correct delta is generated in server.go where there is access to
the broadcast delta and passed via the peer to the links.

Co-authored-by: Jim Posen <jim.posen@gmail.com>
2019-03-26 18:42:00 +01:00
Joost Jager
e6fbbaa1dc
link: also check expiry grace delta for forwarded htlcs
Previously there was no minimum remaining blocks requirement on
forwarded htlcs, which may cause channel arbitrator to force
close the channel directly after forwarding the htlc.

Co-authored-by: Jim Posen <jim.posen@gmail.com>
2019-03-26 18:41:41 +01:00
Joost Jager
32f2b047e8
htlcswitch: hodl invoice
This commit modifies the invoice registry to handle invoices for which
the preimage is not known yet (hodl invoices). In that case, the
resolution channel passed in from links and resolvers is stored until we
either learn the preimage or want to cancel the htlc.
2019-03-15 10:09:17 +01:00
Joost Jager
1f41a2abce
htlcswitch: abtract invoice from link
This commit detaches signaling the invoice registry that an htlc was
locked in from the actually settling of the htlc.

It is a preparation for hodl invoices.
2019-03-15 10:09:15 +01:00
Joost Jager
c23bb5b3f1
htlcswitch: extract settle invoice into method 2019-03-15 10:09:03 +01:00
Joost Jager
19f79613df
channeldb: store hold invoice 2019-03-15 10:08:55 +01:00
Joost Jager
4141773e90
htlcswitch: resolve invoice cancelation race condition
Previously it could happen that an invoice was open at the time of the
LookupInvoice call, the htlc was settled because of that, but when the
SettleInvoice call was made eventually, it would fail because the
invoice was canceled in the mean time. The htlc would then be settled,
but the invoice not marked as such.
2019-03-15 10:08:46 +01:00
Joost Jager
eb598ec7a4
htlcswitch: extract exit hop processing to method 2019-03-15 10:08:43 +01:00
Valentine Wallace
f0e668974e htlcswitch/link: verify an htlc is not too large in HtlcSatifiesPolicy
Before forwarding an HTLC, ensure that the amount to forward
including fees does not exceed the max HTLC set for the channel
link.
2019-02-21 18:45:37 -08:00
Valentine Wallace
20b3114100 htlcswitch+lnwallet+peer: default max htlc in fwding policy of new chans
In this commit, we set a default max HTLC in the forwarding
policies of newly open channels.

The ForwardingPolicy's MaxHTLC field (added in this commit)
will later be used to decide whether an HTLC satisfies our policy before
forwarding it.

To ensure the ForwardingPolicy's MaxHTLC default matches the max HTLC
advertised in the ChannelUpdate sent out for this channel,  we also add
a MaxPendingAmount() function to the lnwallet.Channel.
2019-02-21 18:39:32 -08:00
Conner Fromknecht
76cecb1396
htlcswitch/link: batch write to preimage cache
This commit makes use of the batched AddWitness
method of the WitnessCache, in order to avoid
performing one write for each accepted preimage.

Additionally, this fixes an existing hole in the
consistency guarantees since the batched writes
are now guaranteed to take place before accepting
the next CommitSig. Previously, these writes were
processed in an unsynchronized go routine that
could be delayed arbitrarily long before being
executed.

With this change, the async_payments_benchmarks
actually shows a slight improvement in
performance, presumably because we no longer do
an individual write per preimage, even though
the execution is now explicitly in the critical
path. There is likely also a marginal performance
improvement from the reduction in goroutine
overhead.
2019-02-19 17:06:15 -08:00
Conner Fromknecht
29f07a58cb
cnct+lnwl+hswc: use lntypes.Preimage for witness beacon 2019-02-19 17:06:00 -08:00
Conner Fromknecht
30f61b7630
multi: make AddPreimage variadic, optimistically compute key
In this commit, we modify the WitnessCache's
AddPreimage method to accept a variadic number
of preimages. This enables callers to batch
preimage writes in performance critical areas
of the codebase, e.g. the htlcswitch.

Additionally, we lift the computation of the
witnesses' keys outside of the db transaction.
This saves us from having to do hashing inside
and blocking other callers, and limits extraneous
blocking at the call site.
2019-02-19 17:05:04 -08:00
Joost Jager
1b87fbfab2
invoices+htlcswitch+lnrpc: cancel invoice 2019-02-06 07:29:18 +01:00
Valentine Wallace
f6cffa8f4b htlcswitch/link: add ChannelPoint() to retrieve the channel outpoint.
This function will be used in the switch to retrieve the channel point for a link,
allowing the switch to retrieve individual channels from the database.
2019-02-05 18:17:54 -08:00
Joost Jager
bacd92418a
invoices: use lntypes.Hash and lntypes.Preimage
Previously chainhash.Hash was used, which converts to/from string in
reversed format. Payment hashes and preimages are supposed to be
non-reversed.
2019-02-01 09:42:29 +01:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
orbitalturtle
08750f180b multi: deprecate IncorrectHtlcAmount onion error
In this commit, we deprecate the `IncorrectHtlcAmount` onion error.
We'll still decode this error to use when retrying paths, but we'll no
longer send this ourselves. The `UnknownPaymentHash` error has been
amended to also include the value of the payment as well. This allows us
to worry about one less error.
2019-01-29 18:21:13 -08:00
Johan T. Halseth
480f43f1dc
lnwallet/channel: add lnwire<->PaymentDescriptor FeeUpdate conversion
This commit adds conversion between the lnwire.UpdateFee message and the
new FeeUpdate PaymentDescriptor. We re-purpose the existing Amount field
in the PaymentDescriptor stuct to hold the feerate.
2019-01-10 12:26:33 +01:00
Joost Jager
5515713b88
channeldb: convert settled boolean to state
This commit is a preparation for the addition of new invoice
states. A database migration is not needed because we keep
the same field length and values.
2019-01-04 07:53:55 +01:00