Fixes#481.
Prior to this commit, payments stored in the channel DB only kept a
record of the payment hash. This is a problem as the preimage is what
serves as proof of payment and a user should be able to look up this
value in the future (not just immediately after payment).
Instead of storing both the payment hash and the preimage, we store the
preimage only since the hash can be derrived from this using a SHA256.
In the RPC listpayments command, we now give the preimage in addition to
the payment hash.
This commit changes the listinvoices and lookupinvoice endpoints to
avoid collisions when making requests.
We can still retrieve a list of pending invoices with `listinvoices` by
appending the parameter `pending_only=true` to the request URL.
This commit renames the UpdateFee RPC call together
with associated types to UpdateChannelPolicy. In addition
to fees, now also timelock delta can be specified using
this call.
In this commit, we remove the blocks_till_open from
PendingChannelsResponse as in its current state, the values that are
assigned to this field don’t accurately reflect the naming. This has
caused a good bit of confusion amongst users lately. As a result, we’re
temporarily removing this field until we have proper incremental
notifications within the chain notifier.
In this commit we rename the lnrpc.PendingChannelRequest and
lnrpc.PendingChannelResponse to
lnrpc.PendingChannelsRequest/lnrpc.PendingChannelsResponse. We do this
as we strive to ensure that the naming scheme across the RPC interface
is consistent.
In this commit, we expose the new fee control features to the relevant
commands on the command line. This will allow users to have a greater
degree of control of the fees they pay when: sending coins on chain,
opening a channel, or closing a channel.
In this commit, we modify the OpenChannel, CloseChannel, SendCoins, and
SendMany RPC’s to be able to allow users to manually specify their
fees. Users can either specify a target number of confirmations, or a
target value for manual sat/byte.
This commit adds the service WalletUnlocker, which is to be used
for creating a wallet password at first time startup, and unlocking
the wallet. The service exposes the RPC methods CreateWallet and
UnlockWallet.
This commit adds fields that are supported by the BOLT-11 invoice
format to the Invoice and PayReq protos. These fields are
timestamp, expiry, fallback address, description and
description hash.
This commit removes the revocation_delay field from the HTLC proto as
we no longer need this field since the switch to 2-layer HTLC’s. The
2-layer HTLC construction no longer has the CSV delay directly in the
HTLC script itself.
This commit adds to new RPC’s to the Lightning service: UpdateFees and
FeeReport. Additionally, we also update to the latest version of protc,
golang protobuf, and the gRPC gateway.
This commit removes the num_confs parameter within the
OpenChannelRequest struct as it’s no longer applicable with the new
funding workflow. In the new funding workflow, it’s the responder that
decides how many confirmations are required.
In order to not close the payment stream on payment error the additional
field have been added in payment response. Now error from stream Recv()
function means that something has happend inside the client and we unable
to process any payment farther, and error inside the payment response
means, that something wrong has happend with payment itself.
This commit allows users to sign messages with their node's private key
with the SignMessage interface. The signatures are zbase32 encoded for
human readability/paste-ability. Others users can verify that a message
was signed by another node in their channel database with the
VerifyMessage interface.
This commit adds simple non-blocking stop command to lncli, with an
appropriate proto update and implementation within the rpcserver. When
invoked the interrupt handler routine in signal.go with begin the graceful
shutdown of lnd.
This commit adds some additional fields to the PendingChannels RPC s.t
users will be able to use the RPC to gain a complete view w.r.t where
all the funds within the daemon are, and how soon they can be
retrieved.
The following information is now returned:
* all channels pending open
* all channels pending cooperative close
* all channels pending force close
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
This commit converts the previous QueryRoute command to a new command:
QueryRoutes. This command is identical to QueryRoute other than the
fact that it’s able to return multiple routes rather than a single
route.
This commit adds a new field to the ListChannels RPC command which
indicates if the peer is currently online or not. This is useful as
UI’s will be able to use this information to communicate the
availability of each channel to an end user.
This commit modifies the protobuf file and most of the auto-generated
files to be generated by protoc version v3.0.2. Additionally, this
fixes a minor cosmetic regression within the `lncli` command line tool
which caused the JSON responses to be rendered in `camelCase` rather
than `snake_case`. We fix this by specifying the `json_name` for each
relevant RPC response.
Because we want to persist the state of the channel once the funding
transaction has been broadcast rather than once it has been fully
opened, we need to report the funding transaction ID to the UI or tests
when the transaction is pending, rather than after it has been
confirmed.
Previously, during the channel funding process, peers sent wire
messages using peer.queueMsg. By switching to server.sendToPeer, the
fundingManager is more resilient to network connection issues or system
restarts during the funding process. With server.sendToPeer, if a peer
gets disconnected, the daemon can attempt to reconnect and continue the
process using the peer’s public key ID.
This commit modifies the ListInvoice RPC to also return the encoded
payment request in the response. With this change it’ll be possible to
always obtain the encoded payment for any invoice, rather than only
being able to obtain it directly after the creation of an invoice.
This commit removes the remote_funding field from the OpenChannel
message as dual funding channels aren’t yet supported at the wire level
within the spec (although the daemon is able to handle them properly).
In place we now add the ‘push_sat’ field which allows the initiator to
push over a certain amount to the responder as part of the initial
state.
This commit adds a number of new RPC’s which allow users to query data
that’s now exposed as part of the new routing package: DescribeGraph,
GetChanInfo, GetNodeInfo, QueryRoute, GetNetworkInfo, and SetAlias.
As a result the former ShowRoutingTable command has been removed as the
underlying graph representation has changed.
This commit expands the data returned by the current GetCurrentHeight
to also return the current best block hash, expanding the method into
GetBestBlock. Additionally, the current best BlockHash is also now
displayed within the GetInfo RPC call.
This commit adds synchronous version of the RPC’s to send payments over
channels and open new channels. The previous async versions of these
RPC calls have been removed from the REST interface.
Additionally for these two RPC calls any field which accepted byte
slices now also accept a variant of the field which is a hex-encoded
string.
The OpenChannelSync RPC is intended to be used along with either the
ListChannels or PendingChannels RPC to poll for a channels existence or
non-existence as a signal that the channel is finally open.
This commit modifies a few of the RPC call which previously took a
lightning_id as their paramter to instead take a compressed public key
field. With this change must of the code within the daemon can be
simplified as we only use public keys everywhere throuhgout the daemon.
Signed-off-by: Olaoluwa Osuntokun <laolu32@gmail.com>
This commit adds a REST interface to the existing gRPC server by
employing a simple http proxy auto-generated from the existing protobuf
files. Currently full-support for any streaming RPC’s are currently
untested. In addition to auto-generating a REST proxy server, a
swagger.json is also generated which allows for gRPC-like native
objects with higher-level clients, and also for auto-generated
documentation.
Due to limitations with accepting raw byte strings as parameters, some
RPC’s have been modified to take both raw-bytes and string arguments.
Additionally a new RPC has been added ‘NewWitnessAddress’ since the
proxy doesn’t currently support enum-based arguments.
Currently the proxy server is embedded within the daemon as an active
HTTP server, however we may want to package the proxy server as a
separate binary in the future. Similarly, we may want to add additional
configuration information which controls the optional inclusion of the
REST proxy.
Atm, just like the current gRPC interface, the REST API is fully
unauthenticated. Before moving to an initial alpha release after making
the necessary changes to meet the spec drafted in Milan, authentication
of the RPC interfaces will be addressed.
This commit extracts the channel information that was previously
returned within the ListPeers command to a new RPC command:
ListChannels. Additionally, any pending HTLC’s within the open channel
are also displayed.
This commit adds a new RPC command: `channelbalance` which returns the
sum of all available channel capacity across all open channels. The
total balance is currently returned in units of `satoshis`. Additionally
the `networkHarness` has been modified slightly to allow specifying the
additional "extra" command line parameters when creating the initial
seed nodes. Minor refactoring within the integration tests has been
undertaken in order to increase code re-use across tests.
Closes#29.
LIGHT-131, LIGHT-140, LIGHT-138
`lncli showroutingtable` may output routing table as image.
Use graphviz for graph rendering.
Add explicit version dependency for tools. Add error checking.
LIGHT-133, LIGHT-138 Make output of `lncli showrouting table` in
two different formats: table and json.
Instead of sending serialized routing table send list of channels.
This commit modifies the prior protos to make the open/close channel
RPC commands return the “union” status update rather than a concrete
item of that union directly. With this change, RPC clients can now
receive status updates of the current state of the opening or closing
channel.
This commit integrates BitFury's current routing functionality into lnd. The
primary ochestration point for the routing sub-system in the routingMgr. The
routingMgr manages all persistent and volatile state related to routing within
the network.
Newly opened channels, either when the initiator or responder are inserted into
the routing table once the channel is fully open. Once new links are inserted
the routingMgr can then perform path selection in order to locate an "optimal"
path to a target destination.
This commit adds a new RPC to the RPC server: “sendcoins”. This RPC is
identical to “sendmany” with one small change: the level of send
parallelization is 1. This is useful when one wishes to simply send
coins to a friend and/or a payment.
This commit adds the necessary plumbing within the server, peer, and
rpcServer to handle opening and cooperatively closing a channel with a
remote peer.
Many new data structures have been added to the peer in order to allow
it to efficiently manage opening+.losing new/existing lightning
channels. Additional documentation has been added to several methods
within the peer struct, with some minor renaming along with way. The
peer has also gained a dedicated goroutine whose job it is to manage
any requests pertaining to opening, or closing any channels with the
remote peer.
The messages have been added to lnrpc define the requests and responses
to channel open+close messages. Additional channel logic has been added
between the rpcServer, peer, and server in order to properly manage the
necessary synchronization.
The new available address types are: regular p2pkh, p2wkh, and finally
p2wkh nested within p2sh. The latter address type will initially be
used to allow users to “fund” the lnd wallet.
The newest version has changed the generated gRPC source files a bit.
If you’re running the _newset_ version of gRPC against the previously
generated code, you’ll get a compile error.
This commit fixes the above behavior.
