Commit Graph

28 Commits

Author SHA1 Message Date
Johan T. Halseth
b3b355659b
lncfg+lncli: replace WithDialer->WitchContextDialer
WithDialer is deprecated, use WitchContextDialer instead.
2019-12-17 13:37:29 +01:00
Olaoluwa Osuntokun
2dddbc84d9
lncfg+lnd: gate usage of tweakless commitments based on local/global feature bits
In this commit, we add a new legacy protocol command line flag:
`committweak`. When set, this forces the node to NOT signal usage of the
new commitment format. This allows us to test that we're able to
properly establish channels with legacy nodes. Within the server, we'll
now gate our signalling of this new feature based on the legacy protocol
config. Finally, when accepting/initiating a new channel funding, we'll
now check both the local and remote global feature bits, only using the
new commitment format if both signal the global feature bit.
2019-09-25 18:26:04 -07:00
Wilmer Paulino
cf04b4cfc8
lncfg: show deprecated warning for wtclient.private-tower-uris option
A proper deprecated config option should show a warning to the user
rather than preventing the daemon from starting.
2019-09-25 14:41:26 -07:00
Olaoluwa Osuntokun
653d557fec
config: add new legacy protocol build tag protected sub-config for legacy onion
In this commit, we add a new build tag protected sub-config for legacy
protocol features. The goal of this addition is to be able to default to
new feature within lnd, but expose hooks at the config level to allow
integration tests to force the old behavior to ensure that we're able to
support both the old+new versions.
2019-08-22 18:53:08 -07:00
Wilmer Paulino
0431701262
multi: only allow specifying towers to TowerClient through RPC
With the introduction of the WatchtowerClient RPC subserver, the lnd
configuration flag to specify private watchtowers for the client is no
longer needed and can lead to confusion upon users. Therefore, we remove
the flag completely, and only rely on the watchtower client being active
through a new --wtclient.active flag.
2019-07-30 15:18:17 -07:00
Conner Fromknecht
bd5b8700d8
lncfg: add Watchtower config 2019-06-13 19:54:19 -07:00
Conner Fromknecht
88b5780978
lncfg/wtclient: adds watchtower client CLI configuration 2019-06-13 19:54:18 -07:00
Conner Fromknecht
2bffdf3a1d
lncfg/address: expose TCPResolver 2019-06-13 19:54:18 -07:00
Valentine Wallace
f5eeb05e0a
rpcserver+monitoring/config: enable Prometheus monitoring.
Start the Prometheus exporter in rpcserver.go if monitoring is enabled through the
build tag. Also allow users to specify what address they want the Prometheus
exporter to be listening on.
2019-06-11 11:26:09 -07:00
Olaoluwa Osuntokun
42b081bb37
Merge pull request #2924 from cfromknecht/write-and-flush
peer: resume partial writes due to timeouts
2019-04-26 18:25:37 -07:00
Conner Fromknecht
e3a6de1554
lncfg/workers: reduce default write pool workers to 8
Now that the write pool no longer executes blocking i/o operations, it
is safe to reduce this number considerably. The write pool now only
handles encoding and encryption of messages, making problem
computationally bound and thus dependent on available CPUs. The
descriptions of the workers configs is also updated to explain how users
should set these on their on machines.
2019-04-22 16:30:27 -07:00
Wilmer Paulino
b43894724a
lncfg: parse network for TCP addresses to listen on correct interface
TCP addresses resolved through net.ResolveTCPAddr give a default network
of "tcp", so we'll map back the correct network for the given address.
This ensures that we can listen on the correct interface (IPv4 vs IPv6).
2019-04-12 18:45:11 -07:00
Conner Fromknecht
7504d46e84
lncfg/caches: adds Caches sub config 2019-04-01 16:34:04 -07:00
Conner Fromknecht
5c8ba59790
lncfg/interface: define Validator iface + variadic Validate
This commit introduces the Validator interface, which
is intended to be implemented by any sub configs. It
specifies a Validate() error method that should fail
if a sub configuration contains any invalid or insane
parameters.

In addition, a package-level Validate method can be
used to check a variadic number of sub configs
implementing the Validator interface. This allows the
primary config struct to be extended via targeted
and/or specialized sub configs, and validate all of
them in sequence without bloating the main package
with the actual validation logic.
2019-04-01 16:33:50 -07:00
Conner Fromknecht
60467bef7b
lncfg/workers: bump default read/write workers from 16 -> 100
Bumps the default read and write handlers to be well
above the average number of peers a node has. Since
the worker counts specify only a maximum number of
concurrent read/write workers, it is expected that
the actual usage would converge to the requirements
of the node anyway. However, in preparation for a
major release, this is a conservative measure to
ensure that the default values aren't too low and
improve network instability.
2019-03-26 16:40:57 -07:00
Conner Fromknecht
d81ce61033
config: add sanity check to prevent non-negative worker counts 2019-03-13 20:32:52 -07:00
Conner Fromknecht
3f181b3c06
lncfg/workers: configurable read, write, and sig pool workers 2019-03-13 20:32:25 -07:00
Conner Fromknecht
381b5275c4
lncfg/address_test: test LNAddress parsing, refactor addr tests 2019-01-09 16:37:56 -08:00
Conner Fromknecht
198f9323cc
lncfg/address: add LN address parsing 2019-01-09 16:37:48 -08:00
Olaoluwa Osuntokun
b341dea373
Merge pull request #1108 from sangaman/sever-server
multi: fix sever/server typos
2018-09-27 22:23:45 -07:00
Conner Fromknecht
cf2c371042
multi: fix linting errors 2018-08-02 18:20:50 -07:00
Daniel McNally
e207f9ad71
multi: fix sever/server typos
Fixed sever/server typos and regenerated rpc.pb.go
2018-07-16 09:00:45 -04:00
Wilmer Paulino
bbeb8b2ddd
lncfg+config: use address string in IsLoopback 2018-06-27 19:03:30 -07:00
Olaoluwa Osuntokun
37f56ce976
lncfg: add tor addresses to test cases 2018-06-27 18:10:32 -07:00
Olaoluwa Osuntokun
197b920cac
lncfg: update test cases to map port -> localhost:port 2018-06-27 18:10:31 -07:00
Olaoluwa Osuntokun
f5f68858de
lncfg: update verifyPort to map a plain port to localhost:port 2018-06-27 18:10:30 -07:00
Olaoluwa Osuntokun
5d66635aee
lncfg: update ParseAddressString to be able to parse tor addrs 2018-06-27 18:10:29 -07:00
Oliver Gugger
c1b1dd96ef
lncfg: move configuration helper methods to new package 2018-06-14 08:19:09 +02:00