Commit Graph

244 Commits

Author SHA1 Message Date
Conner Fromknecht
dbc0e88584
Merge pull request #3564 from joostjager/htlcswitch-logging
build+htlcswitch+lnwallet: add prefix logger
2019-10-16 13:00:36 +02:00
Wilmer Paulino
4e1658a02f
htlcswitch: raise max cltv limit to 2016 blocks
The previous limit of 1008 proved to be low, given that almost 50% of
the network still advertises CLTV deltas of 144 blocks, possibly
resulting in routes with many hops failing.
2019-10-11 18:07:40 -04:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Joost Jager
536dd47ce9
htlcswitch: log in lower case 2019-10-03 10:22:07 +02:00
Joost Jager
654b3cc718
htlcswitch: use prefix logger for remaining log statements in link 2019-10-03 10:22:05 +02:00
Joost Jager
03ed1b0aa3
htlcswitch: use prefix logger in link 2019-10-03 10:22:03 +02:00
Olaoluwa Osuntokun
4b65aea306
watchtower+htlcswitch: update client tower logic to recognize safu commitments
In this commit, we update the tower+link logic to tag a commitment as
the new (tweakless) format if it applies. In order to do this, the
BackupTask method has gained an additional parameter to indicate the
type of commitment that we're attempting to upload. This new tweakless
bool is then threaded through all the way to back up task creation to
ensure that we make the proper input.Input.

Finally, we've added a new test case for each existing test case to test
each case w/ and w/o the tweakless modifier.
2019-09-25 18:25:55 -07:00
Johan T. Halseth
2d194c9672
htlcswitch/link: remove chan sync delay
Earlier this delay was needed to increase the likelihood that the DLP
scanario was successfully completed. Since we would risk the connection
being torn down, and the link exit, we could end up with the remote
marking the channel borked, but not finishing the force close.

With the previous set of commits, we should now trigger the force close
before we merk the channel borked, which should ensure we'll resume the
orocess on next restart/connect.
2019-09-25 14:04:44 +02:00
Johan T. Halseth
2a6ad6e634
channeldb+lnwallet: don't pass isRestoredChan to ChanSyncMsg
Since we have access to the internal state of the channel, we can
instead get it directly instead of passing it in as a parameter.
2019-09-25 14:04:44 +02:00
Johan T. Halseth
9423fadf56
htlcswitch/link: don't mark channel borked on force close scanarios
Instead of marking the channel Borked in cases where we want to force
close it, we immediately let the peer fail the link. The channel state
will instead be updated by the channel arbitrator, which will transition
to StateBroadcastCommit, marking the channel borked, then marking the
commitment tx broadcasted right before publishing the force close tx. We
do this to avoid the case where we would mark it Borked, but go down
before being able to publish the closing tx.

Storing the force close tx ensures it will be re-published on startup.
2019-09-25 14:04:44 +02:00
Johan T. Halseth
6e361d04cf
lnwallet+link: move marking channel states to link
Instead of marking the database state when processing the channel
reestablishment message, we wait for the result of this processing to
arrive in the link, and mark it accordingly in the database here.

We do this move the logic determining whether we should force close the
channel or not, and what state to mark it in the DB, to the same place,
as these need to be consistent.
2019-09-25 14:04:43 +02:00
Johan T. Halseth
f40f4620f7
lnwallet/channel: make ErrCommitSyncLocalDataLoss type
This commit converts the ErrCommitSyncLocalDataLoss error into a struct,
that also holds the received last unrevoked commit point from the remote
party.
2019-09-25 14:04:43 +02:00
Johan T. Halseth
eb1b84c0b4
channeldb+lnwallet: make ChanSyncMsg method on OpenChannel 2019-09-25 14:04:42 +02:00
Johan T. Halseth
33fe09482b
lnwire+multi: define Error() for lnwire.Error
To make lnwire.Error actually satisfy the error interface, define the
Error method directly.
2019-09-20 10:55:21 +02:00
Conner Fromknecht
3276bf2960
htlcswitch/link: remove channel reestablish deadline
Now that the link will remain ineligible until it receives
channel_reestablish from the remote peer, we can remove the channel
reestablish timeout entirely.
2019-09-19 12:47:08 -07:00
Conner Fromknecht
9d6ee2ebd9
htlcswitch/link: restrict EligibleToForward to wait for reestablish
This commit modifies the link's EligibleToForward() method only return
true once the peers have successfully exchanged channel reestablish
messages. This is a preliminary step to increasing the reestablish
timeout, ensuring the switch won't try to forward over links while
we're waiting for the remote peer to resume the connection.
2019-09-19 12:46:56 -07:00
Conner Fromknecht
6dca07577d
multi: move active/inactive ntfns from switch to link
Since we will now wait to deliver the event after channel reestablish,
notifying when the link is added to the switch will no longer be
sufficient. Later, we will add receiving reestablish as an additional
requirement for EligibleToForward returning true.

The inactive ntfn is also moved, to ensure that we don't fire inactive
notifications if no corresponding active notification was sent.
2019-09-19 12:46:44 -07:00
Joost Jager
f60e4b1e14
lnwire+htlcswitch: report height for invalid payment details failure
Extends the invalid payment details failure with the new accept height
field. This allows sender to distinguish between a genuine invalid
details situation and a delay caused by intermediate nodes.
2019-09-16 10:10:20 +02:00
Joost Jager
4e140213f9
htlcswitch+invoices: circuit key based hodl notifications
This commit modifies hodl htlc notification from invoice registry from a
single notification per hash to distinct notifications per htlc. This
prepares for htlc-specific information (accept height) to be added to the
notification.
2019-09-16 10:10:14 +02:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Valentine Wallace
8ce7f82da0 discovery+switch: apply zero forwarding policy updates in-memory as well as on disk
In this commit, we fix a bug where if a user updates a forwarding policy to be
zero, the update will be applied to the policy correctly on-disk, but not
in-memory.

We solve this issue by having the gossiper return the list of on-disk updated
policies and passing these policies to the switch, so the switch can assume
that zero-valued fields are intentional and not just uninitialized.
2019-09-09 23:39:44 -07:00
Joost Jager
e54b24289f
htlcswitch: move hop iterator into htlcswitch/hop package
Prepares for onion blob decoding outside of htlcswitch.
2019-09-05 15:30:31 +02:00
Conner Fromknecht
378e0558c5
htlcswitch/hop: move hop.Exit and hop.Source to hop pkg 2019-09-05 01:35:23 -07:00
Conner Fromknecht
fc0e4be4d8
htlcswitch+hop: move ForwardingInfo to hop.ForwaringInfo 2019-09-05 01:35:23 -07:00
Olaoluwa Osuntokun
866867a4b0
Merge pull request #3401 from wpaulino/channel-initiator-max-fee
htlcswitch: avoid proposing fee updates exceeding max fee allowed
2019-09-04 20:38:52 -07:00
Joost Jager
05e6b62cb2
cnct+htlcswitch+invoices: report circuit key to invoice registry
Currently the invoice registry cannot tell apart the htlcs that pay to
an invoice. Because htlcs may also be replayed on startup, it isn't
possible to determine the total amount paid to an invoice.

This commit is a first step towards fixing that. It reports the circuit
keys of htlcs to the invoice registry, which forms the basis for
accurate invoice accounting.
2019-09-04 19:20:13 +02:00
Wilmer Paulino
d8dd6b3245
htlcswitch: cap fee updates to max fee allocation
In this commit, we begin to enforce a maximum channel commitment fee for
channel initiators when attempting to update their commitment fee. Now,
if the new commitment fee happens to exceed their maximum, then a fee
update of the maximum fee allocation will be proposed instead if needed.

A default of up to 50% of the channel initiator's balance is enforced
for the maximum channel commitment fee. It can be modified through the
`--max-channel-fee-allocation` CLI flag.
2019-09-03 16:49:59 -07:00
Olaoluwa Osuntokun
23cc8389f2
multi: add TLV awareness to htlcswitch, pass extra EOB to the invoice registry
In this commit, we update the `HopIterator` to gain awareness of the new
TLV hop payload. The default `HopIterator` will now hide the details of
the TLV from the caller, and return the same `ForwardingInfo` struct in
a uniform manner. We also add a new method: `ExtraOnionBlob` to allow
the caller to obtain the raw EOB (the serialized TLV stream) to pass
around.

Within the link, we'll now pass the EOB information into the invoice
registry. This allows the registry to parse out any additional
information from the EOB that it needs to settle the payment, such as a
preimage shard in the AMP case.
2019-08-22 18:53:05 -07:00
Olaoluwa Osuntokun
2f8d3c4526
Merge pull request #3256 from joostjager/failure-attribution
routing: failure attribution
2019-08-20 16:53:56 -07:00
Joost Jager
67e40d4433
htlcswitch: always assume an onion error for malformed htlc failures
Previously a temporary channel failure was returning for unexpected
malformed htlc failures. This is not what we want to communicate to the
sender, because the sender may apply a penalty to us only.

Returning the temporary channel failure is especially problematic if we
ourselves are the sender and the malformed htlc failure comes from our
direct peer. When interpretating the failure, we aren't able to
distinguish anymore between our channel not having enough balance and
our peer sending an unexpected failure back.
2019-08-17 10:24:05 +02:00
Joost Jager
4dd054ae90
multi: remove debug invoices
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.

Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
2019-08-14 21:33:03 +02:00
Joost Jager
98fac9fb99
htlcswitch+invoices: always return incorrect_or_unknown_payment_details
In order to prevent information leaks by nodes probing with a payment
hash, this commit changes exit hop processing so that it always returns
incorrect_or_unknown_payment_details and leaves the prober in the dark
about whether an invoice actually exists.
2019-08-08 11:04:23 +02:00
Joost Jager
922f133fd2
htlcswitch: report incoming htlc time lock with FinalIncorrectCltvExpiry
Previously the time lock in the onion payload was reported. This is no
new information to the sender.
2019-08-08 11:04:21 +02:00
Joost Jager
45b3c647f7
htlcswitch: return final_incorrect_htlc_amount on onion payload mismatch
This commit fixes exit hop behavior to be in line with the lightning
spec.
2019-08-08 11:04:19 +02:00
Joost Jager
aabd68ebcd
multi: rename FailUnknownPaymentHash to FailIncorrectDetails
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
2019-08-08 11:04:17 +02:00
Wilmer Paulino
24ca962f75
htlcswitch: lower max outgoing cltv expiry to one week worth of blocks
The current value was based on the previous default CLTV delta of 144
blocks. This has been lowered to 40 since lnd v0.6.0-beta, making the
current value of 5000 blocks a bit high. Lowering it to one week should
be more than enough to account for the other major lightning
implementations. Eclair currently has a default CLTV delta of 144, while
c-lightning's is 14.
2019-07-26 18:06:40 -07:00
Wilmer Paulino
87ff463abd
htlcswitch+lnd: make max cltv expiry configurable 2019-07-26 18:05:58 -07:00
nsa
00814dc7c1 htlcswitch: pipeline settles to switch
This commit makes the outgoing link pipeline the settle to the
switch as soon as it receives it. Previously, it would wait for a
revocation before sending it, which caused increased latency on
payments as well as possibly never settling on the incoming link.
A duplicate settle is still sent to the switch, but it is handled
gracefully. A new AckEventTicker was added to the switch which
acknowledges any pending settle / fail entries in an outgoing
link's fwd pkgs in batch. This was needed in order to reduce the
number of db txn's which would have been incurred by acking whenever
we receive a duplicate settle without batching.
2019-07-18 17:20:40 -04:00
Joost Jager
c6f9517e48
lnwire+htlcswitch: only use references for failure messages
Methods on failure message types used to be defined on value receivers.
This allowed assignment of a failure message to ForwardingError both as
a value and as a pointer. This is error-prone, especially when using a
type switch.

In this commit the failure message methods are changed so that they
target pointer receivers.

Two instances where a value was assigned instead of a reference are
fixed.
2019-07-11 19:49:47 +02:00
Conner Fromknecht
851c070595
htlcswitch/link: fix Min/MaxFeeUpdateTimeout godocs 2019-06-13 19:54:18 -07:00
Conner Fromknecht
c41017610b
htlcswitch/link: backup revoked states to watchtower 2019-06-13 19:54:18 -07:00
Olaoluwa Osuntokun
5f0fad85be multi: address lingering TODO by no longer wiping out local HTLCs on remote close
In this commit, we fix a lingering TOOD statement in the channel arb.
Before this commitment, we would simply wipe our our local HTLC set of
the HTLC set that was on the remote commitment transaction on force
close. This was incorrect as if our commitment transaction had an HTLC
that the remote commitment didn't, then we would fail to cancel that
back, and cause both channels to time out on chain.

In order to remedy this, we introduce a new `HtlcSetKey` struct to track
all 3 possible in-flight set of HTLCs: ours, theirs, and their pending.

We also we start to tack on additional data to all the unilateral close
messages we send to subscribers. This new data is the CommitSet, or the
set of valid commitments at channel closure time. This new information
will be used by the channel arb in an upcoming commit to ensure it will
cancel back HTLCs in the case of split commitment state.

Finally, we start to thread through an optional *CommitSet to the
advanceState method. This additional information will give the channel
arb addition information it needs to ensure it properly cancels back
HTLCs that are about to time out or may time out depending on which
commitment is played.

Within the htlcswitch pakage, we modify the `SignNextCommitment` method
to return the new set of pending HTLCs for the remote party's commitment
transaction and `ReceiveRevocation` to return the latest set of
commitment transactions on the remote party's commitment as well. This
is a preparatory change which is part of a larger change to address a
lingering TODO in the cnct.

Additionally, rather than just send of the set of HTLCs after the we
revoke, we'll also send of the set of HTLCs after the remote party
revokes, and we create a pending commitment state for it.
2019-05-27 14:34:13 -07:00
Joost Jager
064e8492de
cnct+htlcswitch+invoices: move invoice parameter check out of link
This commit is the final step in making the link unaware of invoices. It
now purely offers the htlc to the invoice registry and follows
instructions from the invoice registry about how and when to respond to
the htlc.

The change also fixes a bug where upon restart, hodl htlcs were
subjected to the invoice minimum cltv delta requirement again. If the
block height has increased in the mean while, the htlc would be canceled
back.

Furthermore the invoice registry interaction is aligned between link and
contract resolvers.
2019-05-15 14:42:12 +02:00
Olaoluwa Osuntokun
a8fa4094ba
Merge pull request #3027 from Roasbeef/new-onion-structs
router+build: update to the latest version of lightning-onion
2019-05-03 13:30:41 -07:00
Joost Jager
f5f6a52ed8
htlcswitch: check channel policy for local htlcs 2019-05-03 12:22:36 +02:00
Joost Jager
e571532d9a
htlcswitch: reorder policy checks
This commit reorders the policies check as a preparation for splitting
the checks in separate sets for the incoming and outgoing htlc.
2019-05-03 12:22:33 +02:00
Olaoluwa Osuntokun
649e080da6
htlcswitch: for UpdateFailMalformedHTLC packets mark fail as needing conversion
In this commit, we start the first phase of fixing an existing bug
within the switch. As is, we don't properly convert
`UpdateFailMalformedHTLC` to regular `UpdateFailHTLC` messages that are
fully encrypted. When we receive a `UpdateFailMalformedHTLC` today,
we'll convert it into a regular fail message by simply encoding the
failure message raw. This failure message doesn't have  a MAC yet, so if
we sent it backwards, then the destination wouldn't be able to decrypt
it. We can recognize this type of failure as it'll be the same size as
the raw failure message max size, but it has 4 extra bytes for the
encoding. When we come across this message, we'll mark is as needing
conversion so the switch can take care of it.
2019-04-30 20:13:34 -07:00
Olaoluwa Osuntokun
5d68f0f9eb
htlcswitch: only perform CLTV checks for HTLCs with open invoices
In this commit, we fix a bug that would cause a node with a hodl HTLC to
cancel back the HTLC upon restart if the invoice has been settled, but
the HTLC is still present on the commitment transaction. A fix for the
HTLC still being present (not triggering a new commitment) has been
fixed recently. However, for older nodes with a lingering HTLC, on
restart it would be failed back.

In this commit, we make the check stricter by only performing these
checks for HTLCs that are in the open state. This ensures that we'll
only check this constraints the first time around, before the HTLC has
been transitioned to the accepted state.
2019-04-11 17:53:25 -07:00
Conner Fromknecht
057bed2b92
htlcswitch/link: delay restored channel reestablish
This commit adds a brief delay when sending our channel reestablish
message if the link contains a restored channel to ensure we first have
a stable connection. Sending the message will cause the remote peer to
force close the channel, which currently may not be resumed reliably if
the connection is being torn town simultaneously. This delay can be
removed after the force close is reliable, but in the meantime it
improves the reliability of successfully closing out the channel and
allows the `channel_backup_restore/restore_during_creation` to pass
reliably.
2019-04-11 15:42:02 -07:00
Olaoluwa Osuntokun
bc425b1a77
Merge pull request #2918 from joostjager/hodl-drop-fix
htlcswitch: ensure commit tx gets updated after settle hodl invoice
2019-04-11 15:38:56 -07:00